Escolar Documentos
Profissional Documentos
Cultura Documentos
In Taiwan and China, usually we use metric "Ra" system for the surface roughness measurement. In USA, you can simply divide the inch roughness number by 40 to get the metric Ra number. For example, if the inch drawing specifies surface roughness 32. 32 / 40 = Ra 0.8 Surface roughness can be specified in different way of measure. Below is a conversion table of them. Ra
0.013a 0.025a 0.05a 0.10a 0.20a 0.40a 0.80a 1.6a 3.2a 6.3a 12.5a 25a
Rmax(Ry) 0.05S 0.1S 0.2S 0.4S 0.8S 1.6S 3.2S 6.3S 12.5S 25S 50S 100S
Rz 0.05Z 0.1Z 0.2Z 0.4Z 0.8Z 1.6Z 3.2Z 6.3Z 12.5Z 25Z 50Z 100Z
Triangle VVVV
VVV
VV