Escolar Documentos
Profissional Documentos
Cultura Documentos
14 East Service Road, South Expressway, Taguig City 1630 http://www.tup-taguig.edu.ph Telefax No. 838-98-89 Vision: TUP-Taguig Campus shall be a center of excellence for technology and engineering education in the country.
______________________________________________________________________________
MTWP 223
Date: Rating:
I. Title: Operation Planning II. Objective: 1.) To describe the step by step procedure of lathe machining from raw material to final desired output. 2.) To identify the tools/equipment of each lathe operation. 3.) To apply the lathe operation in actual from planned description. III. Illustration/Procedure/Materials and Equipment No. Illustration Tools/Equipment Facing Tool Vernier Caliper Height Gage Description Facing: Both Sides L= 135 mm.
Center Drill
Turning Tool
Republic of the Philippines TECHNOLOGICAL UNIVERSITY OF THE PHILIPPINES Km. 14 East Service Road, South Expressway, Taguig City 1630 http://www.tup-taguig.edu.ph Telefax No. 838-98-89 Vision: TUP-Taguig Campus shall be a center of excellence for technology and engineering education in the country.
______________________________________________________________________________
No.
Illustration
Turning Tool 6
Turning Tool 6
Threading
Necking Tool 8
Republic of the Philippines TECHNOLOGICAL UNIVERSITY OF THE PHILIPPINES Km. 14 East Service Road, South Expressway, Taguig City 1630 http://www.tup-taguig.edu.ph Telefax No. 838-98-89 Vision: TUP-Taguig Campus shall be a center of excellence for technology and engineering education in the country.
______________________________________________________________________________
Forming Tool 10