Escolar Documentos
Profissional Documentos
Cultura Documentos
Expanded Tertiary Education Equivalency and Accreditation Program (ETEEAP) Course Guide in ELAC 3323/3321L (ELECTRONICS 1 Lecture and Laboratory) ERWIN P. ELLAZAR, PECE Instructor I Mobile number: +639328829897 E-mail: ece20897@yahoo.com Consultation Hour: Sunday 11:30 12:00 Consultation Venue: Faculty Room COURSE DESCRIPTION: Introduction to quantum mechanics of solid state electronics; diode and transistor characteristics and models (BJT and FET); diode circuit analysis and applications; transistor biasing; small signal analysis; large signal analysis; transistor amplifiers; Boolean logic; transistor switch. CREDIT UNITS: 3 units lecture/1 unit laboratory Prerequisite: Physics 2, Integral Calculus PROGRAM EDUCATIONAL OBJECTIVES The various Engineering programs will enable its graduates to: 1. Be effective in engineering design and the practical application of engineering theory in accordance with high standards of ethics. 2. Demonstrate effective communication skills and exhibit teamwork. 3. Be successfully employed or accepted into graduate programs and serve their communities, whether locally, nationally or globally.
PERFORMANCE STANDARD(S) PROGRAM OUTCOME(S) REQUIRED FOR PASSING THE COURSE
1. Apply knowledge of mathematics, physical, life and information sciences; and engineering sciences appropriate to the field of practice. 2. An ability to design and conduct experiments, as well as to analyze and interpret data. 3. An ability to design a system, component, or process to meet desired needs within identified constraints. 4. An ability to recognize, formulates, and solves engineering problems. 5. An ability to engage in life-long learning and an understanding of the need to keep current of the developments in the specific field of practice. SUGGESTED REFERENCE/S:
Malvino, A & Bates, D (2007). Electronics Principle 7th Edition. United States: McGraw Hill Boylestad, R. & Nashelsky, L.(2009). Electronics Devices and Circuit Theory. New Jersey: Prentice Hall
SUGGESTED SOFTWARES/SIMULATOR:
COURSE OUTLINE: PART I- TOPICS July 15, 2012 1. Introduction to Electronics 2. Introduction to Semiconductors 3. Diode Equivalent Circuits 4. Wave Shaping Circuits 5. Special Diode Application Suggested Readings: History of Electronics, Semiconductor science and diode Assignment: Questions and problems in diode circuits and applications. Library/Internet Research: Semiconductor fundamentals and diode applications Assignments and researches are to be submitted on August 19, 2012 Laboratory 1. Solid state diode familiarization. 2. Conceptualization of the designed project. Laboratory reports and a proposed designed of the prototype involving diode circuits are to be submitted on August 19, 2012. PART II- TOPICS August 19, 2012
1. Power Supply And Voltage Regulation 2. Bipolar Junction Transistor Suggested Readings: Clippers, clampers, rectifier circuits and BJT transistors Assignment: Problems involving diode circuits and BJT Biasing Library/Internet Research: Rectifier circuits and BJT biasing Assignments and researches are to be submitted on September 2, 2012 Laboratory 1. Perform in actual and simulation of the BJT transistor biasing 2. Conceptualization and deliberation the designed project. Simulation results and laboratory report are to be submitted on September 2, 2012.Project prototype is to be submitted on October 21, 2012. MIDTERM EXAMINATION September 2, 2012
PART III - TOPICS 1. Small- Signal Analysis (BJT) 2. Field Effect Transistor
Suggested Readings: BJT Transistor modeling, AC analysis and FET fundamentals Assignment: Problems involving BJT AC analysis and FET Biasing Library/Internet Research: BJT modeling/ AC analysis and FET biasing Assignments and researches are to be submitted on October 7, 2012 Laboratory 1. Perform in actual and simulation BJT characteristic curve 2. Deliberation of the designed project. Simulation results and laboratory report are to be submitted on October 7, 2012.Project prototype is to be submitted on October 21, 2012.
October 7, 2012
Suggested Readings: FET and BJT AC Analysis Assignment: Problems in AC analysis involving BJT and FET Library/Internet Research: FET small signal and large signal analysis Assignments and researches are to be submitted on October 21, 2012 Laboratory 1. Perform in actual and simulation of JFET characteristic curve 2. Deliberation of the designed project. Simulation results, laboratory report and project prototype are to be submitted on October 21, 2012. FINAL EXAMINATION October 21, 2012
Approved by: