Você está na página 1de 28

Fluid Control

Piston valves KVN KXGT

Edition 2003

KLINGER piston valves


Application examples

In the interest of technical progress, designs and dimensions are subject to modification

KLINGER piston valves


Advantages and summary of types

KVN Advantages KVN 10..50 m.c. III, VI, VIII, Xc Reliably tight across the ports and to the athmosphere Environmentally safe and energy efficient Asbestos-free No erosion on the sealing surfaces Insensitive to impurities due to maintenance-free KVNB 65..200 m.c. III sealing system Unbeatable in a comparison of profitability Maintenance-free Easy to install Valve rings are replaceable in the line Excellent control characteristics Fire-safe tested according to API 6FA KVMN 1/2 2 m.c. III, VIII, Xc Inspected according to EPA-emission-test Conforms to TA-Luft VdTV license 1065 type approval Suitable for oxygen (BAM)

KVN 65..150 m.c. III

KVN 65..200 m.c. VI, VIII

KVSN 1/2 2 m.c. VIII

KVSN 15..50 m.c. VIII

In the interest of technical progress, designs and dimensions are subject to modification

KLINGER piston valves


Optimization through experience

Piston valves KVN Excellent ideas are lasting In the year 1922 Richard KLINGER the founder of this company had an idea, the principle of which is still valid today. He designed the first piston valve. He replaced the sealing system of a conventional globe valve with a cylindrical piston and two elastic replaceable jointing rings. Environmentally safe and energy efficient Constant research and further development yield a quality, which comes through brilliantly in extreme applications and is marked by the slightest of leak rates. KLINGER piston valves are the best solution in hot water-, steam-, heat transfer medium- and dry gas application. Tested and certified KLINGER KVN piston valves have been tested by independent research institutes under the toughest conditions.

They passed the Fire-safe test according to API 6FA as well as the Heliumleakage test with best results. These results impressively prove the exceptional efficiency of KLINGER piston valves. Today, piston valves are manufactured based on the state of the art technique and according to the highest quality requirements of ISO 9001. Efficiency and reliability The sealing element is formed by two elastic valve rings enveloping a stainless steel piston. The upper valve ring seals to the outside, the lower ring seals across the port. Due to the large piston skirt the sealing effect is optmal. As the valve closes the piston removes impurities which the medium might contain from the inside of the lower valve ring. In this way the valve reliably seals off even contaminated media. In principle, damage to the sealing surface is precluded and tightness is guaranteed as a result.

Excellent control characteristics The standard version of the KLINGER piston valve is already very well suited for controlling the flow. Because the piston is guided by the upper and the lower valve ring vibration and instability in the pipe does not occure. KLINGER piston valves have proved to be excellent as by-pass control valves. Through simple replacement of the piston and the lantern bush the KVN can be retrofitted to act as a special precision control valve. In-line valve ring replacement A newly installed piston valve does not require any maintenance for a long time after. However, the spindle should be regularly lubricated. If nevertheless a valve ring wears out it can be replaced without problems while remaining in the line and, if assembly instructions are followed, it can be changed by inhouse personnel. After replacement the valve is like new.

In the interest of technical progress, designs and dimensions are subject to modification

KX-GT: Competitiveless in sealing


Environmentally safe and energy efficient

The core of the piston valve: The valve rings KX-GT The high quality valve ring KX-GT is made of graphite laminate with tang metal sheet inserts made of stainless steel. The valve is absolutely asbestosand maintenance-free. The variable thermal expansions which occur under alternating thermal loads are completely compensated by KX-GT-valve rings, which were presealed in a built-in condition. Long term sealing even at highest demands Media in the temperature range between .40 C and +.400 C and at pressures of up to 63 bar, can be reliably controlled. KX-GT valve rings are excellent for the use in temperature shock operation as well as steam condensate alternating-operation. (Flash-application). Pressure releaved piston In order to ensure convenient actuation at high differential pressures, the pistons of the KVN range are made of cast steel, whereof the sizes DN 65 to 200 are pressure releaved. The spindle is sealed with a gland and an additional valve ring provides the sealing between the body and the bonnet.

Cost justification Piston valve seat valve bellow seal valve

Leakage in comparison
Standard Piston valve 2 ppm Bellow seal valve 50 ppm TA-Luft 13 ppm EPA 500 ppm deduced leakage rates 8. .10-3 mbar x l/s 3,9. .10-2 mbar x l/s 1. .10-2 mbar x l/s 3,9. .10-1 mbar x l/s

In the interest of technical progress, designs and dimensions are subject to modification

Actuators for KVN


Electro mechanical and pneumatic actuators

Electro mechanical actuator Various designs at request

Pneumatic actuator The pneumatic actuator is single acting and offers an ON/OFF-function. It is often preferred to the electro mechanical actuator for many reasons. The actuator closes the valve with spring force (security !) and opens it with air pressure. Safe control media are compressed air and nitrogen at a maximum of 6 bar. Compresssed air supply: R 1/4 , measurement, weight and valve lift at request. Pneumatic actuators can be applied at ambient temperatures between .30 C and +.90 C. The standard version includes pneumatic diaphragm actuator, end switch, stroke scale and a mechanical valve lifting stop. Special design with hand emergency-switch is available.

In the interest of technical progress, designs and dimensions are subject to modification

KLINGER piston valves


Technical data

Type DN KLINGER flanged-valves KVN 32..50 KVN 65..150 KVN 15..50 KVN 65..150 KVNB 65..150 KVN 65..200 KVN 10..50 KVN 10..50 KVN 10..50 KVN 65..200 KLINGER valves with female screwed ends KVMN 2 KVMN 2 KVMN 2 KVMN 2 KVMN 2 KVMN 2 KLINGER valves with weld ends KVSN 2 KVSN 15..50 Pressure/temperature-diagrams Connection dimensions Material code Technical data Special design Piston valve witrh heating jacket KVN 10..200 Piston valve for Fire-safe application KVN 10..200 Piston valve for TA-Luft and EPA application KVN 10..200 Certifications

PN 6 6 16 16 16 16 40 40 40 40 16 16 63 63 63 63 63 63

material cast iron cast iron cast iron cast iron cast iron spheroidal cast iron spheroidal cast iron cast steel stainless steel cast steel cast iron cast iron cast steel cast steel stainless steel stainless steel cast steel cast steel

connection EN 1092-2 EN 1092-2 EN 1092-2 EN 1092-2 EN 1092-2 EN 1092-2 EN 1092-2 EN 1092-1 EN 1092-1 EN 1092-1 ISO 228-1 NPT-thread ANSI B 2.1 ISO 228-1 NPT-thread ANSI B 2.1 ISO 228-1 NPT-thread ANSI B 2.1 EN 12 760 EN 12 627

overall length EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 EN 558-1 GR1 DIN 3202-M9 DIN 3202-M9 DIN 3202-M9 DIN 3202-M9 DIN 3202-M9 DIN 3202-M9 DIN 3202-M9

page 8 9 8 9 10 11 8 8 8 11 12 12 12 12 12 12 13 14 15 16 16 17

18 18 19 20

In the interest of technical progress, designs and dimensions are subject to modification

Piston valves KVN


Flange acc. to EN 1092-2 PN 16, flange acc. to EN 1092-1 PN 40 Material: cast iron, spheroidal cast iron, cast steel, stainless steel; valve ring KX-GT

KVN 10..50
PN 40
DN 10..50 material code VI, VIII, Xc

PN 16
DN 15..50 material code III

PN 6
DN 32..50 material code III

overall length acc.to EN 558-1 Grundreihe 1

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

Suggested order specification Shut off valve PN 40, PN 16, PN 6 designed as straight-through piston valve, sealed off by 2 flexible valve rings body made of cast iron, spheroid EN 558-1al cast iron, cast steel or stainless steel. Handwheel made of cast iron, piston made of special Niro-steel, overall length to EN 558-1, flanges drilled to EN 1092-1 resp. EN1092-2. Make: KLINGER Type: KVN VI KX fr DN 10..50 Ordering example: KVN 10-VIII KX, PN 40

1 Body 2 Bonnetl 3 Handwheel 5 Lantern bush 6 Split nut 7 Piston 8 Spindle 9 Upper valve ring 11 Gewindebchse 1) 12 Tension pin 1) 13 Bonnet nut 14 Handwheel nut 15 Stud bolt KVN10..25 15 Stud bolt KVN32..50 16 Belleville washer 18 Disc 19 Serrated lock washer 21 Type plate
1) only DN 40 and DN 50

EN-GJL-250 EN-GJL-250 EN-GJL-200 Sint C10 1.0715 gal 1.4104 1.4021 KX-GT 1.1181 1.1181 1.1181 1.7709 50CrV4 1.4401 spring steel Al

EN-JS 1025 EN-JS 1025 EN-GJL-200 Sint C10 1.0715 gal 1.4104 1.4021 KX-GT Sint C11 spez. spring steel 1.1181 1.1181 1.1181 1.7709 50CrV4 1.4401 spring steel Al

1.0619 1.0619 EN-GJL-200 Sint C10 1.0715 gal 1.4104 1.4021 KX-GT Sint C11 spez. spring steel 1.1181 1.1181 1.1181 1.7709 50CrV4 1.4401 spring steel Al

1.4581 1.4581 EN-GJL-200 2) 1.4408 1.4571 1.4404 1.4404 KX-GT 1.4401 1.4305 A4 A4 A4 A4 1.4310 1.4401 A2 Al
2) rilsanisiert

Overall length in mm DN 10 15 20 25 32 40 50 L 130 130 150 160 180 200 230 H 105 105 120 139 156 186 211 Hub 23 23 28 33 37 44 51 A 100 100 120 140 160 180 200

approx. weight (kg) m.c. III/PN 16 PN 6 m.c. III m.c. VI/PN 40 2,50 4,15 5,40 8,00 8,50 10,20 10,90 13,70 14,20

PN 40 m.c. VIII/Xc 2,50 2,70 4,60 5,90 9,10 11,40 16,30

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification

Piston valves KVN


Flange acc. to EN 1092-2 PN 16 Material: cast iron; valve ring KX-GT

KVN 65..150
PN 16
material code III

PN 6
material code III

overall length acc.to EN 558-1 Grundreihe 1

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

1 Body 2 Bonnetl 3 Handwheel 4 Piston 5 Lantern bush 8 Threaded bush 9 Spindle 11 Split nut 12 Disc 13 Piston nose cone 14 Upper valve ring 16 Serrated lock washer 17 Washer 18 Securing ring 19 Stud bolt 20 Handwheel nut 21 Bonnet nut 22 Belleville washer 24 Tension pin 25 Type plate

EN-GJL-250 EN-GJL-250 EN-GJL-200 1.4136 EN-GJL-200 Sint C11 special 1.4021 1.4401 1.4401 1.4401 KX-GT spring steel St37 / mat nickel 1.4310K 1.1181 5 5 50CrV4 spring steel Al

Suggested order specification Shut off valves PN 16, PN 6 Designed as a straight-through piston valve, sealed off by 2 flexible valve rings body and handwheel made of grey cast iron, piston made of special Niro-steel, overall length to EN 558-1, flanges drilled to EN 1092-2. Make: KLINGER Type: KVN III KX for DN 65..150 Ordering example: KVN 65-III KX, PN 16

Overall length in mm DN L 65 290 80 310 100 350 125 400 150 480

H 194,5 219 260 303 331

Hub 50 58 78 86 98

A 265 265 300 400 400

approx. weight (kg) PN 6 19,00 26,00 36,50 52,20 80,00

PN 16 20,30 27,60 38,30 55,00 85,00

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification 9

Piston valves KVNB


Flange acc. to EN 1092-2 PN 16 Material: cast iron; valve ring KX-GT

KVNB 65..200
PN 16
material code III

overall length acc.to EN 558-1 Grundreihe 1

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

Suggested order specification Shut-off valve PN 16 Designed as straight-through piston valve, backseat relieved, sealed off by 3 flexible valve rings, stuffing box self retightening by means of belleville washer. Body and handwheel made of cast iron, piston made of special nirosteel. Overall length acc. To EN 558-1 GR1, flange drilled acc. to EN 1092-2 Make: KLINGER Type: KVNB III KX for DN 65..200 Ordering example: KVNB 65-III KX, PN 16

PN 16 Overall length in mm DN 65 80 100 125 150 200 L 290 310 350 400 480 600 H Hub 194,5 50 219 58 260 78 303 86 331 98 561 118 A 265 265 300 400 400 400 approx. weight (kg) 24,0 30,5 46,5 69,0 85,0 157,5

1 Body 2 Bonnetl 3 Handwheel 4 Piston 5 Lantern bush 9 Spindle 10 Piston shaftt 11 Gland retainer 12 Disc 13 Piston nose cone 14 Upper valve ring 16 OT-valve ring 17 Stuffingbox ring 18 Thrust piece 19 Back seat 20 Threaded bush 21 Split nut 22 Washer 23 Disc 24 Swing bolt 25 Stud bolt 26 Securing ring 27 Bonnet nut 28 Bonnet nut gekerbt 29 Bonnet nut 30 Bonnet nut 31 Tension pin 32 Notched parallel pin 33 Belleville washer 34 Belleville washer 36 Serrated lock washer 37 Type plate

III EN-GJL-250 EN-GJL 250 EN-GJL-200 1.4086 EN-GJL-200 1.4021 1.4104 EN-JS 1030 1.4401 1.4401 KX-GT Grafit-L KX-GT EN-GJL-200 1.4104 EN-GJL-200 1.4401 St 37 gal 1.4401 5.6 5,6 1.4310K 5 AISI 304 5 5 spring steel 6.8 50CrV4 50 CrV4 spring steel Al

10

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification

Piston valves KVN


Flanges acc. to EN 1092-2 VI, flanges acc. to EN 1092-1 VIII Material: spheroidal cast iron, cast steel; valve ring KX-GT

KVN 65..200
PN 40
DN 65..200 material code VI, VIII

PN 16 DN 65..200
material code VI

overall length acc.to EN 558-1 Grundreihe 1

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

Suggested order specification Shut-off valves PN 40, PN 16 Designed as straight-through piston valves, beackseat-relieved, sealed off by 3 flexible valve rings stuffing box self retightening by means of belleville washer, body made of spheroidal cast iron or cast steel. handwheel made of cast iron, piston made of special Nirosteel, overall length to EN 558-1, flanges drilled to EN1092-1 resp. EN1092-2 Make: KLINGER Type: KVN VIII KX for DN 65..200 Ordering example: KVN 65-VIII KX, PN 40

VI / PN 16 1 Body 2 Bonnetl 3 Handwheel 4 Piston 5 Lantern bush 9 Spindle 10 Piston shaftt 11 Gland retainer 12 Disc 13 Piston nose cone 14 Upper valve ring 16 OT-valve ring 17 Stuffingbox ring 18 Thrust piece 19 Back seat 20 Threaded bush
EN-JS 1025 EN-JS 1025 1.0619 EN-JS 1025 EN-JS 1025 1.0619

EN-GJL200 1.4086 EN-GJL200 1.4021 1.4104 1.4401 1.4401 KX-GT Grafit-L KX-GT 1.0308 1.4104 Sint C11 special

EN-GJL200 1.4086 EN-GJL200 1.4021 1.4104 1.4401 1.4401 KX-GT Grafit-L KX-GT 1.0308 1.4104 Sint C11 special

EN-GJL200 1.4086 EN-GJL200 1.4021 1.4104 1.4401 1.4401 KX-GT Grafit-L KX-GT 1.0308 1.4104 Sint C11 special

EN-JS 1030 EN-JS 1030 EN-JS 1030

21 Split nut 22 Washer 23 Disc 24 Swing bolt 25 Stud bolt 26 Securing ring 27 Bonnet nut 28 Hexagon nut notched 29 Bonnet nut 30 Bonnet nut 31 Tension pin 32 Notched parallel pin 33 Belleville washer 34 Belleville washer 36 Serrated lock washer 37 Type plate

VI / PN 16 1.4401 St12.03 A4 5.6 1.7709 1.4310K 1.1181 5 black 1.1181 1.1181 spring steel 6.8 50CrV4 50 CrV4 spring steel Al

1.4401 St12.03 A4 5.6 1.7709 1.4310K 1.1181 5 black 1.1181 1.1181 spring steel 6.8 50CrV4 50 CrV4 spring steel Al

1.4401 St12.03 A4 5.6 1.7709 1.4310K 1.1181 5 black 1.1181 1.1181 spring steel 6.8 50CrV4 50 CrV4 spring steel Al

PN 40 Overall length in mm DN 65 80 100 125 150 200 L 290 310 350 400 480 600 H 306 327 375 447 477 561 Hub 49 59 63 83 93 118 A 250 250 280 320 360 400 approx. weight (kg) 25,0 31,8 47,8 75,8 107,5 180,0

PN 16 Overall length in mm DN 65 80 100 125 150 200 L 290 310 350 400 480 600 H Hub 194,5 50 219 58 260 78 303 86 331 98 561 118 A 265 265 300 400 400 400 approx. weight (kg) 20,3 27,6 38,3 55,0 85,0 180,0

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification 11

Piston valves KVMN


Female screwed ends with pipe thread acc. to ISO 228-1, femal screwed ends with NPT-thread acc.to. ANSI B2.1 Materials: cast iron, cast steel, stainless steel, valve ring KX-GT

KVMN 1/2 2 1/2 2 NPT


PN 63
DN 1/2 2 material code VIII, Xc

PN 16
DN 1/2 2 material code III

Overall length to DIN 3202-M9

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

Suggested order specification Shut-off valve PN 63, PN 16 Designed as straight through piston vlave, sealed-off by 2 flexible valve rings body made of cast iron, cast steel or stainless steel. Handwheel made of grey cast iron, piston made of special Niro-steel. Overall length to DIN 3202-M9, bushes with pipe threads to ISO 228-1, bushes with NPT threads to ANSI B2.1. Make: KLINGER Type: KVMN VIII KX for DN 1/2 2 KVMN KX VIII for DN 1/2 2 NPT Odering example: KVMN 1/2 -III KX, PN 16

1 Body 2 Bonnetl 3 Handwheel 5 Lantern bush 7 Piston 8 Spindle 9 Upper valve ring 10 Bonnet nut 11 Handwheel nut 12 Stud bolt 1/2 1 Stud bolt 1 1/4 2 13 Threaded bush 1) 14 Tension pin 1) 15 Belleville washer 16 Split nut 17 Disc 18 Serrated lock washer 21 Type plate

III EN-GJL-250 EN-GJL-250 EN-GJL-200 Sint C10 1.4104 1.4021 KX-GT 1.1181 1.1181 1.1181 1.7709 50CrV4 1.0715 1.4401 spring steel Al

VIII 1.0619 1.0619 EN-GJL-200 Sint C10 1.4104 1.4021 KX-GT 1.1181 1.1181 1.1181 1.7709 Sint C11 special spring steel 50CrV4 1.0715 1.4401 spring steel Al

Xc 1.4581 1.4581 EN-GJL-200 rilanisiert 1.4408 1.4404 1.4404 KX-GT A4..70 A4..70 A4..70 A4..70 Sint C11 special spring steel 1.4310 1.4571 1.4401 A2 Al

1) only DN 40 and DN 50

Overall length in mm DN L 100 120 135 1 160 1 185 1 220 2 PN 16, PN 63 DN 1 1 1 2

H 105 120 138 156 186 211

Hub 23 28 33 37 44 51

A 100 120 140 160 180 200

approx. weight (kg) PN 16 PN 63 1,40 1,50 2,35 2,45 3,50 3,60 5,70 5,90 8,10 8,50 11,00 11,50

DIN Anschlussmuffen d1 t1 R 15,5 R 16,0 R1 17,0 R1 19,0 R1 19,0 R2 26,0

t2 19,5 20,0 22,0 25,0 24,0 31,0

SW 36 41 50 65 75 90

NPT Anschlussmuffen d1 t1 -14 NPT 13,5 -14 NPT 14,0 1 .11NPT 17,0 1 -11NPT 17,5 1 -11NPT 17,5 2 .11NPT 18,0

t2 19,5 20,0 24,0 24,5 24,5 25,0

12

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification

Piston valves KVSN


Socket weld ends acc. to EN 12 760 Material: cast steel; valve ring KX-GT

KVSN 1/2 2
PN 63
DN 1/2 2 material code VIII

Overall length to DIN 3202-M9

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

DN 1/2 3/4 1 1 1/4 1 1/2 2

Connection dimensions in mm d1 t1 SW 21,80 10 36 27,10 13 41 33,80 13 50 42,60 13 65 48,70 13 75 61,20 16 90

Suggested order specification Shut-off valve PN 63 Designed as straight-through piston valve, sealed-off by 2 flexible valve rings, body made of cast steel and handwheel made of cast iron, piston made of special Niro-steel, overall length to DIN 3202-M9. Socket weld ends to EN 12 760 Make: KLINGER Type: KVSN VIII KX fr DN 1/2 2 Ordering example: KVSN 1/2 -VIII KX, PN 63

Part name 1 Body 2 Bonnetl 3 Handwheel 5 Lantern bush 7 Piston 8 Spindle 9 Upper valve ring 10 Bonnet nut 11 Handwheel nut 12 Stud bolt 1/2 1 Stud bolt 1 1/4 2 13 Threaded bush 1) 14 Tension pin 1) 15 Belleville washer 16 Split nut 17 Disc 18 Serrated lock washer 21 Type plate
1) only DN 40 and DN 50

Material code VIII 1.0619 1.0619 EN-GJL-200 Sint C10 1.4104 1.4021 KX-GT 1.1181 1.1181 1.1181 1.7709 Sint C11 special spring steel 50CrV4 1.0715 1.4401 spring steel Al

KVSN 1/2 2
Overall length in mm DN L 100 1/2 120 3/4 135 1 160 1 1/4 185 1 1/2 220 2 H 105 120 138 156 186 211 Hub 23 28 33 37 44 51 A 100 120 140 160 180 200 weight (kg) 1,50 2,45 3,60 5,90 8,50 11,50

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification 13

Piston valves KVSN


butt weld ends acc. to EN 12 627 Material: cast steel; valve ring KX-GT

KVSN 15..50
PN 63
DN 15..50 material code VIII

Overall length acc. to Klinger-standard

Pressure and temperatur limits see page 15 Material code and flange dimension see page 16

Connection dimensions in mm DN d 15 21,3 20 26,9 25 33,7 32 42,4 40 48,3 50 60,3

s 3,25 3,25 4,00 4,00 4,00 4,50

Suggested order specification Shut-off valves PN 63 Designed as a straight-through piston valve, sealed off by 2 flexible valve rings, body made of cast steel, handwheel made of cast iron, piston made of special Niro-steel, butt weld ends acc. to EN 12 627 Make: KLINGER Type: KVSN VIII KX fr DN 15..50 Ordering example: KVSN 15-VIII KX, PN 63

Part name 1 Body 2 Bonnetl 3 Handwheel 4 Pipe thread 5 Lantern bush 7 Piston 8 Spindle 9 Upper valve ring 10 Bonnet nut 11 Handwheel nut 12 Stud bolt 15..25 Stud bolt 32..50 13 Threaded bush 1) 14 Tension pin 1) 15 Belleville washer 16 Split nut 17 Disc 18 Serrated lock washer 21 Type plate
1) only DN 40 and DN 50

Material code VIII 1.0619 1.0619 EN-GJL-200 1.0305 Sint C10 1.4104 1.4021 KX-GT 1.1181 1.1181 1.1181 1.7709 Sint C11 special spring steel 50CrV4 1.0715 1.4401 spring steel Al

Overall length in mm DN 15 20 25 32 40 50 L 145 170 200 230 270 320 H 105 120 138 156 186 211 Hub 23 28 33 37 44 51 A 100 120 140 160 180 200

approx. weight (kg) 1,70 2,55 3,80 6,20 8,90 12,20

14

All measurements in mm

In the interest of technical progress, designs and dimensions are subject to modification

Pressure-/temperature diagrams
Economical consideration Application limitations
KVN 10..50 KVN 65..150 KVNB 65..200

KVN 65..200

KVMN 1/2 2

KVSN

Pressure-/temperature diagrams This pressure-/temperature diagram helps you to choose the most economical of the KLINGER piston valves KVN.

In the interest of technical progress, designs and dimensions are subject to modification

15

Technical data

Connection dimensions in mm
DN 32 40 50 65 80 100 125 150 D 120 130 140 160 190 210 240 265 b 14 14 14 14 19 19 19 19 g 69 78 88 108 124 144 174 199 f 3 3 3 3 3 3 3 3 Lochzahl 4 4 4 4 4 4 8 8 l 14 14 14 14 19 19 19 19 k 90 100 110 130 150 170 200 225 DN 15 20 25 32 40 50 65 80 100 125 150 200 D 95 105 115 140 150 165 185 200 235 270 300 375 b 16 16 18 18 19 19 19 19 19 23,5 26 30 g 46 56 65 76 84 99 118 132 156 184 211 284 f 2 2 3 3 3 3 3 3 3 3 3 3 Lochzahl 4 4 4 4 4 4 8 8 8 8 8 12 l 14 14 14 19 19 19 19 19 23 28 28 31 k 65 75 85 100 110 125 145 160 190 220 250 320

DN 15 20 25 32 40 50 65 80 100 125 150 200

D 95 105 115 140 150 165 185 200 220 250 285 340

b 16 18 18 18 18 18 20 22 24 26 26 30

g 46 56 65 76 84 99 118 132 156 184 211 266

f 2 2 3 3 3 3 3 3 3 3 3 3

Lochzahl 4 4 4 4 4 4 4 8 8 8 8 12

l 14 14 14 19 19 19 19 19 19 19 23 23

k 65 75 85 100 110 125 145 160 180 210 240 295

DN 10 15 20 25 32 40 50 DN 65 80 100 125 150 200

D 90 95 105 115 140 150 165 D 185 200 235 270 300 375

b 16 16 18 18 18 18 20 b 22 24 24 26 28 34

g 40 45 58 68 78 88 102 g 122 138 162 188 218 285

f 2 2 2 2 2 2 2 f 2 2 2 2 2 2

Lochzahl 4 4 4 4 4 4 4 Lochzahl 8 8 8 8 8 12

l 14 14 14 14 18 18 18 l 18 18 22 26 26 30

k 60 65 75 85 100 110 125 k 145 160 190 220 250 320

Material code (m.c.)


m.c. III VI VIII Xc Body cast iron spheroidal cast iron cast steel stainless steel Bonnetl cast iron spheroidal cast iron cast steel stainless steel internal parts colour of body without copper alloy parts grey without copper alloy parts green without copper alloy parts blue stainless steel polished, pickled

Primary criterion for the material code number is the basic material of the body and bonnet.

Flow coefficient and zeta-values


Type KVN DN kV 10 2 4 15 4,5 4 20 8 4 25 4 32 4 40 4 50 50 4 65 69 6 80 104 6 100 163 6 125 233 7,2 150 335 7,2 200 582 7,2 12,5 20,5 32

KV = Flow coefficient (m3/h) = Zeta-value

Graphs and exact flow calculations for The values shown in the table have an accuracy of 10% and apply to water at all KLINGER valves are available at rea temperature of 20 C and a density of quest approx. 1000 kg/m3.

16

In the interest of technical progress, designs and dimensions are subject to modification

Technical data

Application limitations with KX-GT


Service category Permissible working pressure (bar) at pressure rating 63 40 25 16 10 63 40 25 16 10 48 30 19 12 10 16 10 6 4 2,5 Lowest permissible working temperature in C KVN KX III VI VIII Xc

.10 .10

.10

.10 3)

1) with A4 screws 2) with lantern made of stainless steel 3) Material 1.4408 is admitted up to .196 C

II

.60 2) .10

.60 1) 2)

.60 3)

III

.60 1) 2) .60 1) 2) .10

.85 3)

Belleville washers, stud bolts


DN 10/15 20 25 32 40 50 65 80 100 125 150 200 Body Bonnetl belleville washer stud bolts Dimension piece*) Dimension piece 20. .10,2. .1 4 M 10. .30 2 20. .10,2. .1 6 M 10. .30 3 20. .10,2. .1 8 M 10. .30 4 28. .12,2. .1,5 8 M 12. .35 4 28. .12,2. .1,5 8 M 12. .35 4 28. .12,2. .1,5 8 M 12. .35 4 34. .16,3. .2 8 M 16. .55 4 34. .16,3. .2 12 M 16. .55 6 34. .16,3. .2 16 M 16. .60 8 40. .20,4. .2,25 12 M 20. .70 6 40. .20,4. .2,25 16 M 20. .70 8 50. .25,4. .2,5 16 M 24. .75 8 Bonnetl Gland retainer belleville washer stud bolts Dimension piece Dimension piece

20. .10,2. .1 20. .10,2. .1 20. .10,2. .1 20. .10,2. .1 20. .10,2. .1 20. .10,2. .1

4 4 4 4 4 4

M 10. .50 M 10. .50 M 10. .50 M 10. .50 M 10. .50 M 10. .50

2 2 2 2 2 2

Dimensions of valve rings and stuffing box rings


DN 10..50 m.c. III, VI, VIII, Xc outside Type item diameter KVN KX 10 2 valve rings 23,5 KVN KX 15 2 valve rings 23,5 KVN KX 20 2 valve rings 30 KVN KX 25 2 valve rings 38 KVN KX 32 2 valve rings 45 KVN KX 40 2 valve rings 58 KVN KX 50 2 valve rings 70 DN 65..150 m.c. III Type KVN KX 65 KVN KX 80 KVN KX 100 KVN KX 125 KVN KX 150 item 2 valve rings 2 valve rings 2 valve rings 2 valve rings 2 valve rings outside diameter 82 94 112 135 155 inside diameter 60 70 90 110 130 H 13.3 14.6 14.6 16.0 17.3 inside diameter 15 15 20 25 30 40 50 H 8.0 8.0 9.3 10.6 14.6 14.6 16.0 DN 65..200 m.c. III (KVNB), VI, VIII outside Type item diameter 82 2 valve rings KVN KX 1 bonnet valve ring 82 65 3 stuffing box rings 36 94 2 valve rings KVN KX 1 bonnet valve ring 94 80 3 stuffing box rings 36 112 2 valve rings KVN KX 1 bonnet valve ring 112 100 3 stuffing box rings 46 135 2 valve rings KVN KX 1 bonnet valve ring 135 125 3 stuffing box rings 46 155 2 valve rings KVN KX 1 bonnet valve ring 155 150 3 stuffing box rings 46 200 2 Ventilringe KVN KX 1 bonnet valve ring 200 200 3 stuffing box rings 46 inside diameter 60 69 24 70 80 24 90 100 30 110 121 30 130 141 30 170 184 30 H 13.3 10.0 8.0 14.6 10.0 8.0 14.6 11.0 10.0 16.0 13.0 10.0 17.3 13.0 10.0 18.6 15.0 10.0

In the interest of technical progress, designs and dimensions are subject to modification

17

Special designs
KVN with heating jacket KVN Fire-safe
KVN with heating jacket All KLINGER piston valves KVN can be provided with heating jacket. Overall- / connection dimensions and application range, see the appropriate product pages. KLINGER piston valves with heating jacket are designed for the use with viscous media or media which solidify when cold. The jacket is made of stainless steel 1.4541 and may be used with all heating fluids for which steel piping is suitable. Two heating connections and a drain connection are provided on the heating jacket. The max. heating fluid pressure is 6 bar. Since considerable condensation may be expected in the heating jacket when steamheating is used, it is advisable to connect a steam trap to the drain connection of the jacket. Max. pressure of heating medium 6 bar. Pressure rating of the heating jacket: up to DN 100: PN 25 DN 125..200: PN 16

KVN Fire-safe tested acc. to API 6FA The Fire-safe test was conducted by TV in Austria, acc. to API Standard GEA and ISO 10497. The Fire-safe-type KVN requires a special type of sealing elements across the port which the KVN is supplied with and can also be retrofitted without problems. This is the advantage of the KLINGER-modular systems. Die Fire-Safe-Ausfhrung der KVN verlangt besondere Dichtelemente im Durchgang. Diese Fire-Safe-Dichtelemente werden direkt im Werk montiert,

18

In the interest of technical progress, designs and dimensions are subject to modification

Special designs
KVN KX1 for TA-Luft and EPA applications

KVN KX-1 for TA-Luft and EPA applications The standard KX-GT valve ring of this special design is equipped with additional Klingerflon gaskets. These additional rings are joined to the upper valve ring resp. the stuffing box. This system guarantees lowest leakage rates (2 ppm !) and meets the TA-Luft and EPA-requirements even better than conventional sealings. All other parts of the valves are as in the standard design and the according specifications. Media in the temperature range from .196 C to +.300 C and pressures up to 63 bar can be reliably sealed with the KLINGER piston valve KVN with KX-1 sealing system. All KLINGER piston valves already in service can easily be equipped with the KX-1 system without dissambly. TA-Luft = Technische Anleitung Luft (technical guidelines air) Germany EPA = Environmental Protection Agency USA

Part name 1 Upper valve ring 2 Lantern bush 3 Sealing 4 OT-Valve ring 5 Stuffingbox ring

Material KX-GT Sint C10 K-Flon Grafit-L KX-GT

KVN 10..50

KVN 65..200

In the interest of technical progress, designs and dimensions are subject to modification

19

KVN certification

Manufacturer- and type approvals


No. 1 2 3 4 5 Tests and approvals Quality system ISO 9001 Testing institute TV CERT Austria Certificate resp. registration Nr. 20 100 0918 21878 21878 PZ/00/S/091/HVK V 1225/Sei/85

Manufacturer approval acc. to ADTV Bayern Merkblatt HPO and TRB 801 No. 45 Welding approval acc. to DIN EN 729..2 Welding approval acc.to OENORM EN 729..2 Manufacturer approval for welding acc. to OENORM M 7812 Part name 1 Approval acc. to Pressure Equipment Directive 97/23/EG/DGVO 426/99 TV Sddeutschland TV Austria TV Austria

6 7 8 9 10 11 12 13 14 15 16

TV Austria

Q02/00 TV.AR.086..96 T.AGG.252..95

Type approval for KVN 10..50 acc. TV Bayern to VdTV 1065 Type approval for KVN 10..50 for tankers (RID/ADR+TRT) TV Bayern

Fire-safe-test KVN 2 Class 300 acc. Southwest Research InstiTest No. 6..298 to API 6F tute / USA Fire-safe-test KVN 50 PN 40 acc. to TV Austria API 6F Fire-safe-test KVN 100 PN 40 acc.to TV Austria API 6F Release for oxygen service for KVN BAM Berlin 10..200 TA-Luft-tests with KVN 50 PN 40 with KX-1/rings TA-Luft-tests for KVN 100 PN 40 with KX-1/rings TV Hessen TV Austria V 371/MK/WR V 1798/SEI/HA Tgb.Nr. 6494/96 IV W 8000/2 WP 1430/G/FUK WP 919/MK/BE CRN OC....

TA-Luft-tests for KVN 50 PN 40 with TV Austria TFM 1600/rings Registrations of KVN in Canada TSSA Cabada TSSA Cabada

Leakage rates

KVN KX1-GT 50.000 cycle test


20 In the interest of technical progress, designs and dimensions are subject to modification

Table of chemical resistance

All given recommendations are intended to help in selecting suitable materials and valve types. No guarantee can be given since performance and service life of the products depend on a series of factors on which the manufacturer has no influence. Special regulations must be observed. Please contact us in cases of doubt. Solid media listed in the table are to be understood as aqueous solutions or suspensions. EN-JL1040 Cast iron to EN 1561 EN-JS 1030 Spheroidal cast iron to EN 1563 1.0619 mild cast steel acc. to EN 10213 1.4581 stabilised chrome-nickel-molybdenum steel acc. to EN 10213 Sealing ring materials: KX GT special sealing based on graphite TFM-1600 special sealing PTFE-based

Explanation of symbols for metallic materials: 0 = practically resistant, loss in weight less than 2,4 g/m2/day 1 = fairly resistant, loss in weight 2,4..24 g/m2/day 2 = low resistance, loss in weight 24..72 g/ m2/day 3 = non-resistant, loss in weight more than 72 g/m2/day = not tested or not customary for sealing materials: = suitable = not suitable Abbreviations: Bp. = boiling point satd. sol. = saturated solution hyd.sol. = hydrous solution conc. = concentrated

Fluid

Chemical formular

Concentration and temperature % C

Sealing ring materials

Metallic materials

Material code m.c.

EN-JS 1025 EN-GJL 250

1.0619

Aceton Acetylen Air, dry Alum Alum Aluminium acetate Aluminium ethylate Aluminium chlorate Aluminium fluoride Aluminium oxyde Ammonium bicarbonate Ammonium chloride Ammonium chloride Ammonium chloride Ammonium chloride Ammonium diphosphate Ammonium carbonate Ammonium nitrate Ammonium sulphate Ammonium hydroxyde Ammonium hydroxyde Aniline Arsenic acid Asphalt (tar) Beer Benzene Benzine Bleaching liquor (chloride of lime) Borax

CH3COCH3 C2H2 KAI(SO4)2 KAI(SO4)2 (CH3COO)3Al Al(OC2H5)2 Al(CIO3)3 AIF3 Al2 O3 (NH4)HCO3 NH4CI NH4CI NH4CI NH4CI (NH2)2HPO4 (NH4)2CO3 NH4NO3 (NH4)2SO4 NH4 OH NH4OH C6H5NH2 H3As04 10 10

20

20 100

5 10 10 50

20 20 100 20 Kp 20 20 20 100

10 10

C6H6

Na2B407 10 H20

0 0 3 0 0 0 0 1 1 3 1 1 2 2 3 0 0 0 2 0 0 3

0 0 3 0 0 0 0 1 1 3 1 1 2 2 3 0 0 0 2 0 0 3

1.4581

K-Flon

KFC

0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0

all III, VIII, X, Xc all X, Xc X, Xc X, Xc alle X, Xc III, VIII alle III, VIII, X, Xc all all X, Xc all III, VIII, X, Xc X, Xc X, Xc X, Xc III, VIII, X, Xc III, VIII, X, Xc all X, Xc X, Xc all all X, Xc X, Xc X, Xc

In the interest of technical progress, designs and dimensions are subject to modification

21

Fluid

Chemical formular

Concentration and temperature % C

Sealing ring materials

Metallic materials

Material code m.c.

EN-JS 1025 EN-GJL 250

1.0619

Boric acid Boric acid Boric acid Butane Buttermilk Butyl acetate Butyl alcohol Calcium bisulphite Calcium bisulphite Calcium chloride Calcium chloride Calcium hydroxide (milk of lime) Calcium hypochlorite Calcium sulphate Carbon dioxyde, dry Carbon dioxyde, dry Carbon disulfide Carbon tetrachloride Chloroform Chloroform Chlor sulphonic acid Chromic acid Chromic acid Chromic acid Citric acid Citric acid

H3BO3 H3BO3 H3BO3 C4H10 CH3C00C4H9 C4H9OH Ca(HS 03)2 Ca(HS 03)2 CaCl2 CaCl2 Ca(OH)2 Ca(CIO)2 CaSO4 CO2 CO2 CS2 CCl4 HOSO2Cl H2CroO4 H2CroO4 H2CroO4 (CH2COOH)2C (OH)COOH CH2COOH)2C (OH)COOH

4 4 100

20 100 100 20

20 200 20 100

bis

150 400 20 Kp

2 2 2 0 0 0 2 2 1 2 0 2 0 0 0 0 1 1

2 2 2 0 0 0 3 3 1 2 0 2 0 0 0 0 1 1

1.4581

K-Flon

KFC

0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0 0 3

X, Xc X, Xc X, Xc all X, Xc all all X, Xc X, Xc X, Xc X, Xc all X, Xc all all VII, X, Xc III, VIII, X, Xc all all

10 10 50

20 Kp 20 20 Kp

1 0 3 3 0 0 2 3 3 2 2 0 0 0 0 0 1 0 0 0

0 0 3 3 0 0 2 2 2 2 2 0 0 0 0 0 1 0 0 0

0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0

III, VIII, X, Xc X, Xc III, VIII, X, Xc X, Xc X, Xc all all X, Xc X, Xc X, Xc X, Xc X, Xc all all 3) all 3) X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all all all all all all

Clophen T 64 Copper acetate wat. sol. (CH3COOO)2Cu (CH3COOO)2Cu Copper acetate wat. sol Copper sulphate CuSO4 CuSO4 Copper sulphate Diazotation bath,(weakly acid) Diazotation bath,(weakly acid) Diesel oil Diphyl Dowtherm A Dye liquor, alkaline or neutral Dye liquor, alkaline or neutral dye liquor, organic acid Dye liquor, organic acid Dye liquor,weakly sulphuric acid H2SO4 under 0,3% Dye liquor, strongly sulphuric acid Dye liquor, strongly sulphuric acid H2SO4 above 0,3% H2SO4 above 0,3% Ethane Ethanol Ethyl ether Ethyl acetate Ethylene Ethylen chloride (Dichlorethan) C 2H 6 C2H5OH C2H5OC2H6 CH3COOC2H5 C 2H 4 (CH2Cl)2

20 Kp 20 Kp 20 80 20

20 Kp 20 Kp Kp 20 Kp

Kp 20

22

In the interest of technical progress, designs and dimensions are subject to modification

Fluid

Chemical formular

Concentration and temperature % C

Sealing ring materials

Metallic materials

Material code m.c.

EN-JS 1025 EN-GJL 250

1.0619

Fatty acids from C6 Formaldehyde Formaldehyde Formic acid Formic acid Formic acid Formic acid Freon Glacial acetic acid Glacial acetic acid Glacial acetic acid Glacial acetic acid Glacial acetic acid Glacial acetic acid Glacial acetic acid Glycerine Glycerine Grape vinegar Heat transfer oils Hydrochloric acid, dry Hydrochloric acid, dry Hydrochloric acid Hydrochloric acid Hydrochloric acid Hydrogen Hydrogen peroxide Hydrogen peroxide Hydrogen sulphide, gas, dry Hydrogen sulphide, gas,wet Hydroxylamine sulphate Hydroxylamine sulphate Illuminating gas Kreosote Kreosote Lead acetate (lead sugar) Lead arsenate Linseed oil Linseed oil Magnesium sulphate Magnesium sulphate Manganous chloride Manganous chloride Mercury Mercury (II) chloride Mercury (II) nitrate Methyl alcohol Methyl alcohol Methylene chloride Methylene chloride M.E.K (Butanone) Milk of lime Milk of lime Milk

HCHO HCHO HCOOH HCOOH HCOOH HCOOH CH3COOH CH3COOH CH3COOH CH3COOH CH3COOH CH3COOH CH3COOH (CH2OH)2CHOH (CH2OH)2CHOH

40 40 10 10 100 100 10 10 50 50 80 80

20 Kp 20 100 20 100 20 Kp 20 Kp 20 Kp 20 20 100 20 20 100 20 50 20 20 50 20 20 20 Kp 20 Kp Kp 20 100 20


Kp

HCI HCI HCI HCI HCI H2 H2O2 H 2O 2 H 2S H 2S (NH2OH)H2SO4 (NH2OH)H2SO4

0,2 0,2 1

10 10

Pb(CH3C00)2 Pb(As04)2

100

MgSO4 MgSO4 MnCl2 MnCl2 Hg HgCl2 Hg(NO3)2 CH3OH CH3OH CH2Cl2 CH2Cl2 CH3COC2H5 Ca(OH)2 Ca(OH)2

20 Kp 20 20 20 20 Kp 20 Kp Kp 20 Kp

1 3 3 3 3 3 3 0 2 2 3 3 3 3 2 2 2 0 1 1 3 3 3 0 3 3 0 3 1 1 2 2 1 3 3

1 3 3 3 3 3 3 0 2 2 2 2 2 2 2 2 2 0 1 1 3 3 3 0 3 3 0 3 1 1 2 2 1 3 3

1.4581

K-Flon

KFC

0 0 0 0 1 0 1 0 0 0 0 1 1 1 0 0 0 0 0 1 2 0 1 1 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0

all X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all 3) all all X, Xc X, Xc X, Xc all 4) X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all all X, Xc X, Xc III, VIII, X, Xc X, Xc X, Xc all all

0 0 2

0 0 2

0 0 0

all all X, Xc

In the interest of technical progress, designs and dimensions are subject to modification

23

Fluid

Chemical formular

Concentration and temperature % C

Sealing ring materials

Metallic materials

Material code m.c.

EN-JS 1025 EN-GJL 250

1.0619

Natrium acetate Natural gas Nitric acid Nitric acid Nitric acid Nitric acid Nitric acid Nitric acid Nitrogen Oils (lubricating oils, mineral) Oils (vegetable) Oleic acid Oxalic acid Oxygen Penthyl acetate Petroleum ether Phenol Phosphoric acid Phosphoric acid Phosphoric acid Phosphoric acid Phosphoric acid Phosphoric acid Potassium acetate Potassium dichromate Potassium dichromate Potassium hydrogenartrate Potassium hydrogenartrate (at 100 o, sat.sol.)

CH3COONa HNO3 HNO3 HNO3 HNO3 HNO3 HNO3 N2

20 10 10 40 40 konz. konz.

20 20 Kp 20 Kp 20 Kp 20 20

C17H33COOH COOHCOOH 02 CH3COOC5H11 C6H5OH H3PO4 H3PO4 H3PO4 H3PO4 H3PO4 H3PO4 CH3COOK K2Cr2O7 K2Cr2O7 COOH(CHOH) 2COOK COOH(CHOH) 2COOK K2CO3 K2CO3 KCIO3

20 20 10 10 50 50 80 80 25 20 Kp 20 Kp 20 Kp Kp 20 Kp 20 Kp

xx

1 1 3 3 3 3 3 3 0 0 0 0 2 0 0 0 2 2 3 2 3 3 3 0 0 2

1 0 3 3 3 3 3 2 0 0 0 0 2 0 0 0 2 2 3 2 3 3 3 0 0 2

1.4581

K-Flon

KFC

0 0 0 0 0 0 0 1 0 0 0 0 8 0 0 0 0 0 0 0 1 0 2 0 0 0 0 1

all all X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all all all all X, Xc all all all X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all all X, XC X, Xc X, Xc

Potassium carbonate Potassium carbonate (potash) Potassium chlorate (at 100 o, sat.sol.) KCr(SO4)212H2O Potassium chromium sulphate Potassium chromium sulphate (chro- KCr(SO4)212H2O KOH mic alum) KOH Potassium hydroxyde KOH Potassium hydroxyde KOH Potassium hydroxyde KOCI Potassium hydroxyde KOCI Potassium hydrochlorite KJ Potassium hydrochlorite up to 20.g KJ akt. Cl2/l Potassium iodide KNO3 KNO3 Potassium iodide KMnO4 Potassium nitrate KMnO4 Potassium nitrate Potassium permanganaet Potassium cyanide solution KCN Propane C3H8 Salicylic acid C6H4OHCOOH Salpeter

50

20 Kp Kp 20 Kp 20 Kp 20 Kp 20 40 Kp 20 Kp 20 Kp

1 1 2 0 0 3 2 2 2 1 0 2 0 3 1 0 2 0

0 0 2 0 0 3 2 2 2 1 0 2 0 3 1 0 2 0

0 0 0 0 3 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0

all all X, Xc X, Xc all X, Xc all X, Xc X, Xc X. Xc Xc III, VIII, X, Xc all X, Xc all X, Xc III, VIII, X, Xc all X, Xc all

25 25 50 50

20 20 20

5)

24

In the interest of technical progress, designs and dimensions are subject to modification

Fluid

Chemical formular

Concentration and temperature % C

Sealing ring materials

Metallic materials

Material code m.c.

EN-JS 1025 EN-GJL 250

1.0619

Sea water Sea water Silicone oil Soap Sodium carbonate Sodium carbonate Sodium hydroxide Sodium hydroxide Sodium hydroxide Sodium hydroxide Sodium sulphate Sole Spinbath (up to 10% H2SO4) Starch solution Steam (water vapour) Stearic acid Sugar Sugar Sulphite lye (fresh cooking liquor, spent liquor) Sulphite lye (fresh cooking liquor, spent liquor) Sulphur dioxide Sulphurous acid (cold) sat.sol. Sulfphuric acid Sulfphuric acid Sulfphuric acid Sulfphuric acid Tannic acid Tannic acid Tannic acid Tar (neutral) Tartaric acid Toluol Trichlorethylene Turpentine oil Urea Water (fresh-a.drinking water) Water vapour <.140 C Water vapour >.140 C Water glass (K- and Na-silicate) Xylene

20 Kp

Na2CO3 Na2CO3 NaOH NaOH NaOH NaOH Na2SO4 NaCl

20 35 35

20 Kp Kp 20 Kp

20 80


5)

3 3 0 0 0 1 0 0 3 0 3 3 2 0 2 1 1 3 3 3 3 1 0 2 3 2 1 2 0 1 0 1 0 0 0 0 0

3 3 0 0 0 1 0 0 3 0 3 3 2 0 2 1 1 3 3 3 3 1 0 2 3 2 1 2 0 1 0 1 0 0 0 0 0

1.4581

K-Flon

KFC

0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

X, Xc X, Xc all all all all all X, Xc all X, Xc all X, Xc X, Xc X, Xc all X, Xc all all X, Xc X, Xc X, Xc X, Xc X, Xc X, Xc all X, Xc X, Xc X, Xc III, VII, X, Xc X, Xc all all all all all VII, VIII VII, VIII all all

C17H35 COOH 20 80 20 80

Ca(HSO3)2 Ca(HSO3)2 SO2 H2SO3 H2SO4 H2SO4 H2SO4 H2SO4 C76H52O46 C76H52O46 C76H52O46 (CHOHCOOH)2 C6H5CH3 C2HCI3 (NH2)2CO H 2O K2SiO3Na2HCI3 C6H4(CH3)2

1 10 90 konz. 10 10 50

20 20 20 20 20 Kp 20 180 20 20 20 20

20

1) Piston and piston shaft in 1.4404 (please specify when ordering). 2) Discoloration may occur. 3) With heat-transfer media please inquire in our Gumpoldskirchen factory regarding choice of valve

rings. Please state the type of medium and the temperature range. Cast iron is chemically resistant to heat transfer media but, in view of the ability of these media to penetrage the pores, it is not recommended

4) All ferrous materials are resistant to hydrogen; it is pointed out, however, that hydrogen diffuses through cast iron and can cause embrittlement. 5) 150 C

In the interest of technical progress, designs and dimensions are subject to modification

25

Types of KVN valves

KVN 10..50, VIII cast steel

KVNB 65..200, VIII cast steel

KVN 65..150, III cast iron

KVN 10..50, Xc stainless steel

KVMN 1/2 2 , III cast iron


26

KVN ANSI, VIII cast steel

In the interest of technical progress, designs and dimensions are subject to modification

KLINGER piston valves


Security over years

In the interest of technical progress, designs and dimensions are subject to modification

27

KLINGER product range

Product range

BallostarKHA 3-piece ball valve made of grey cast iron, steel and stainless cast steel BallostarKHI 2-piece ball valve made of grey cast iron, steel and stainless cast steel Piston valves made of grey cast iron, nodular cast iron, steel and stainless cast steel KLINGER Monoball One-piece ball valve made of steel and stainless cast steel

KLINGERMATIC Actuator for piston valves and ball valves Liquid level gauges for steam boiler and process application Reflex and transparent gauges Circular sight-glasses AB cocks Packing-sleeve cocks and pressuregauge cocks in brass, steel and stainless steel KLINGER Ball-o-top Brass ball valves

Key role Link Innovation Navigation Growth Efficiency Routine

KLINGER Fluid Control GmbH A-2352 Gumpoldskirchen, Austria Postfach 19, Am Kanal 8..10 Tel. +.43 (0)2252-600-469 Fax +.43 (0)2252-63 336 e-mail: office@klinger.kfc.at www.klinger.kfc.at

Você também pode gostar