Escolar Documentos
Profissional Documentos
Cultura Documentos
SPECIAL TOOLS: This release is a result of: ______ FIELD ENGINEERING REQUEST __X___ PRODUCT ENGINEERING REQUEST ______ OTHER (SPECIFY) ENGINEERING SL3000,SL500, SL8500
2.0 PREREQUISITE/CONCURRENT/COMPANION INFORMATION: NOTE: This version of SLC works with the SL500 (code level 1300), SL8500 (code level 3.98b) and SL3000 (code level 2.05) libraries. 2.1 PREREQUISITE (Must have been installed previously) 2.2 CONCURRENT (Minimum level to be installed together) ECO ECO ECO 189 618 623 SL8500 SL500 SL3000 3.98b 1300 2.05
3.0 PURPOSE: Install and Upgrade SL Console Local and Remote versions to version FRS_4.10 4.0 DESCRIPTION: Instructions for upgrading SL Console for Local OpPanel and Remote SLC. Instructions apply to the SL8500 and SL3000 Local OpPanel and Remote versions as well as to the SL500 Remote version. 5.0 CSE HOURS: 1.0 MACH. HOURS: 0.0 SYSTEM HOURS: 0.0 NO. of CSEs: 1
Rev: C Sheet 1 of 6
2) Select the Load Code tab in the central area of the window
Rev: C Sheet 2 of 6
3) Click the Browse button and find the SLConsoleLocalDist.jar you downloaded earlier 4) Confirm it's the version you want (via the FILE CONTENTS), and click the Load button when ready, in the upper right-central area of the window.
5) Shortly after clicking Load, you will get a message which asks you to confirm before the upgrade will continue. Do so by clicking the OK button.
6) The code will load and show a percent complete status, after which the UNPACK STATUS area in the center of the window will update and tell you the result of your upload. Unpack completed means it worked, Unpack failed means it didn't. If it didn't work, try again, or consult the User's guide of the library for further guidance.
Rev: C Sheet 3 of 6
IMPORTANT NOTE: During the download process to the library you may experience a transfer time-out. If this occurs over a network or directly attached using a cross-over, your system may be running the Ethernet connection at 100Mbps. Change the network settings for your connection to reflect 10Mbps/FULL DUPLEX instead of AUTO or 100Mbps. Also note that the upload could take several minutes, and will depend on the network. 7) Now that the code is loaded, it must be activated. Choose the Activate tab in the center of the window and choose SLConsole from the Target drop down menu. Note that there will be a short pause while this information is gathered.
8) After picking the version you just uploaded, click the Activate button in the upper rightcentral area of the window
Rev: C Sheet 4 of 6
10) The activation process may take a few minutes, but the status display will update and you will be informed when the process completes.
If there were no errors during the procedure, you are finished. Go to the local operator panel and confirm that it is now running the new version as desired.
Rev: C Sheet 5 of 6
Sun StorageTek Product Information http://www.sun.com/storagetek/support/index.jsp Sun Download Center (SDLC) for Customers for SLC http://www.sun.com/download/index.jsp Sun Partner Exchange (SPE) for Partners and OEMs for SLC https://spe.sun.com/spx/control/Login Firmware and SLC Download Site for Service Personnel Uniform Software Repository http://dlrequest.sfbay.sun.com:88/usr/login
Rev: C Sheet 6 of 6