Escolar Documentos
Profissional Documentos
Cultura Documentos
Interoperability Results
P/N 300-000-166
Rev C35
Table of Contents
Copyright EMC Corporation 2012...................................................................................................................................................................................................1
EMC's Policies and Requirements for EMC Support Matrix........................................................................................................................................................2
Selections.........................................................................................................................................................................................................................................3
Fibre Connectivity: Switch..............................................................................................................................................................................................................4
Switched Fabric Topology Parameters.........................................................................................................................................................................................8
Greenplum Scalable Networking..................................................................................................................................................................................................12
Greenplum Standard Networking.................................................................................................................................................................................................13
Internet Protocol Addressing Support........................................................................................................................................................................................14
EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS". EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY
KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.
Trademark Information
EMC2, EMC, EMC ControlCenter, AlphaStor, ApplicationXtender, Catalog Solution, Celerra, CentraStar, CLARalert, CLARiiON, ClientPak, Connectrix,
Co-StandbyServer, Dantz, Direct Matrix Architecture, DiskXtender, Documentum, EmailXtender, EmailXtract, HighRoad, Legato, Legato NetWorker,
Navisphere, OpenScale, PowerPath, RepliStor, ResourcePak, Retrospect, Smarts, SnapShotServer, SnapView/IP, SRDF, Symmetrix, TimeFinder, VisualSAN,
VSAM Assist, Xtender, Xtender Solutions, and where information lives are registered trademarks and EMC Developers Program, EMC OnCourse, EMC
Proven, EMC Snap, EMC Storage Administrator, Access Logix, ArchiveXtender, Authentic Problems, Automated Resource Manager, AutoStart, AutoSwap,
AVALONidm, C-Clip, Celerra Replicator, Centera, CLARevent, Codebook Correlation Technology, Common Information Model, CopyCross, CopyPoint,
DatabaseXtender, Direct Matrix, DiskXtender 2000, EDM, E-Lab, EmailXaminer, Enginuity, eRoom, FarPoint, FLARE, FullTime, Global File Virtualization,
Graphic Visualization, InfoMover, Invista, MirrorView, NetWin, NetWorker, OnAlert, Powerlink, PowerSnap, Rainfinity, RecoverPoint, RepliCare, SafeLine, SAN
Advisor, SAN Copy, SAN Manager, SDMS, SnapImage, SnapSure, SnapView, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix DMX,
UltraPoint, Viewlets, VisualSRM, and WebXtender are trademarks of EMC Corporation. All other trademarks used herein are the property of their respective
owners.
This section describes EMC's policies and requirements for the EMC Support Matrix document.
This document is being provided for informational purposes only and may change at any time. This version supercedes and replaces all previous versions. The
information is to serve only as a guide for those configurations/products which EMC has qualified. This document identifies and lists various vendor host
systems and integral components that have been tested and qualified by EMC for use with EMC products. Vendor components include, but are not limited to,
host operating systems, HBAs (host bus adapters) and associated drivers, firmware and BIOS; Fibre Channel switches, hubs and bridges. This document also
lists various vendors, cluster software, tape hardware, storage system boot procedures, heterogeneous information storage, and configurations that EMC has
tested and/or qualified for use with EMC products.
The information included in this document is intended as a guide in the configuration of systems for EMC's products. It is not intended to be the sole resource
for system configuration. For more information or answers to questions not found in this document, please see EMC's website, other EMC documentation, such
as EMC's Host Connectivity Guides, EMC Networked Storage Topology Guide, EMC CLARiiON Open Systems Configuration Guide, relevant vendor
documentation, or contact your EMC Sales or EMC Customer Service representative.
For Symmetrix 4.x support, please look at the Symmetrix 8000 Series section and check the footnotes for model/microcode compatibility. EMC employees can
obtain older revisions of ESM containing more Symmetrix 4.x information from the Symmetrix Service Readiness group.
For a complete listing of any known issues with the current support matrix content, please review the ESM Errata on E-Lab Interoperability Navigator. To report
any issues with the content contained within the support matrix, follow the steps documented on the Contacts link on E-Lab Interoperability Navigator. For
E-Lab Interoperability Navigator access through Powerlink:
http://powerlink.emc.com/community/tools/index.jhtml?community_id=2&categoryId=esn_builder&categoryName=E-Lab+Navigator. For access through Avatar:
http://avatar.eng.emc.com/Avatar.asp.
Policies and procedures for support of EMC products are set forth in the customer's applicable agreements. EMC's publication of information relating to system
configurations covers only those outlined in this document or by approval from EMC Engineering. Other system configurations not found in this document are
not qualified without EMC Engineering approval. EMC has qualified hardware and software provided only by the vendors listed in this document, and host
systems, hardware and software from other vendors are not qualified, and may never be. Please contact your EMC Sales or EMC Customer Service
representative for updates or information not included in this document.
EMC maintains a large collection of the products listed above as well as third-party application software for qualification with EMC's storage systems and to
simulate customer environments, but you must consult the vendors for information about their system internals, such as hardware and associated drivers.
The information in this document is maintained by EMC and EMC strives to update this document with new releases of hardware, operating systems, firmware,
BIOS, switch software, etc., as they become available from the vendors. EMC works with the vendors during their development and release processes in order
to be fully informed at the time the vendors release new versions. EMC does not announce qualification prior to vendors' General Availability. In some cases,
EMC may choose to perform regression testing following the vendors' GA; in these cases and in cases where advance preparation is not possible, EMC may
test and qualify vendors' products as appropriate after they have been released. For early support of such products, including vendor beta participation, contact
your EMC Sales or EMC Customer Service representative.
EMC strives to continue support for any installed platforms, but may remove support from this host matrix for new installations within three months after the
vendor has announced that this platform has reached the end of life. EMC will continue support for existing installations of hardware, operating systems, and
components that the vendor has officially declared to have reached end of life as long as support is available from the vendor.
Selections
Your Selections:
Switch
Switch Firmware
Cisco Nexus 5548 5.0(2)N1(1), Cisco Nexus 5548 5.0(2)N2(1), Cisco Nexus 5548 5.0(3)N1(1c), Cisco Nexus 5548
5.0(3)N2(2), Cisco Nexus 5548 5.0(3)N2(2a), Cisco Nexus 5548 5.0.(3)N2(1), Cisco Nexus 5548 5.1(3)N1(1), Cisco Nexus
5548 5.1(3)N1(1a), Cisco Nexus 5548 5.1(3)N2(1)
Selections
No.
Port
Switch Luns/HBA Sharing
Y
Cisco
Nexus
55481
Storage Array
EMC CLARiiON: CX3-10c, CX3-40c/CX3-20c,
CX3-80/CX3-40(F)/CX3-20(F), CX300,
CX4-120/CX4-240/CX4-480/CX4-960,
CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8,
CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X,
CX4-120FCOE/CX4-240FCOE/CX4-480FCOE/CX4-960FCOE,
CX700/CX500;
EMC Celerra: NS-120 (Native Block)3, 4, NS-480 (Native Block)5, 6, NS-960
(Native Block)7, 8;
EMC Symmetrix: DMX-3, DMX-4, DMX/DMX-2, VMAX, VMAX 20K, VMAX
40K;
EMC Unified Storage VNX5100/5300/5500/5700/7500 (Block);
NEC Symmetrix: DMX-4, VMAX
Cisco
Nexus
55481
256
Cisco P81E12;
Dell Broadcom: 57800 2x10Gb DA/SFP+ + 2x1Gb
BT NDC, 57810 Dual Port 10Gb DA/SFP+
Converged Network Adapter, 57810 Dual Port
10GbE KR Blade Converged Mezz, 57810s (2xKR)
LOM, 57810s Dual Port 10GbE KR bNDC;
Dell Intel Ethernet X520 10G Dual Port: KX4-KR
Mezz, bNDC KR;
Dell: OCM10102-FM (Mezz CNA), QMD8262-k 10G
Dual Port bNDC KR, QME8262-K Dual Port 10GbE
Mezzanine Card;
Emulex: LP21000-C-E (CNA)15, LP21000-M-E
(CNA)15, LP21000-NC (CNA), LP21002-C-E (CNA),
LP21002-M-E (CNA), LP21002-NC (CNA),
OCe11102-FM-E (CNA), OCe11102-FX-E (CNA);
Hewlett Packard HP: CN1000E Dual Port 10Gb
Converged Network Adapter (AW520A), CN1100E
Dual Port 10Gb Converged Network Adapter
(BK835A), NC551i Dual Port FlexFabric 10Gb
Converged Network Adapter (embedded BE2),
NC551m Dual Port FlexFabric 10Gb Converged
Network Adapter (580151-B21), NC553i Dual Port
FlexFabric 10Gb Converged Network Adapter
(embedded BE3), NC553m Dual Port FlexFabric
10Gb Converged Network Adapter (613431-B21);
IBM: 42C1800 (QLE8142 CNA), 42C1820 (1020
CNA)14, 42C1830 (Qlogic 2-port 10Gb CNA CFFh
for IBM BladeCenter), 81Y1650 (Brocade 2-port
10Gb CNA CFFh for IBM BladeCenter), 90Y3566
(Emulex 10GbE Virtual Fabric Adapter Advanced
II)16, 17, 18, 95Y3751 (Emulex Dual port VFA 2+ for
IBM x-Series servers)19;
Intel: X520-DA2, X520-SR1, X520-SR2;
Oracle: SG-XPCIEFCOE2-Q-SR (QLE8142 CNA),
SG-XPCIEFCOE2-Q-TA (QLE8152 CNA)11;
QLogic: QLE8042-CK (CNA), QLE8042-SR-CK
Cisco
Nexus
55481
256
Cisco P81E12;
Dell: BR1741M-k (CNA), Broadcom 57712-KR 10Gb
bNDC, Broadcom 57800 2x10Gb DA/SFP+ + 2x1Gb
BT NDC, Broadcom 57810 Dual Port 10Gb
DA/SFP+ Converged Network Adapter, Broadcom
57810 Dual Port 10GbE KR Blade Converged Mezz,
Broadcom 57810s (2xKR) LOM, Broadcom 57810s
Dual Port 10GbE KR bNDC, Intel Ethernet X520
10G Dual Port KX4-KR Mezz, Intel Ethernet X520
10G Dual Port bNDC KR, OCM10102-FM (Mezz
CNA), QLE8152 (CNA)13, QMD8262-k 10G Dual
Port bNDC KR, QME8142 (CNA), QME8242 (CNA),
QME8262-K Dual Port 10GbE Mezzanine Card;
Emulex: LP21000-C-E (CNA)15, LP21000-M-E
(CNA)15, LP21000-NC (CNA), LP21002-C-E (CNA),
LP21002-M-E (CNA), LP21002-NC (CNA),
OCe10102-FM-E (CNA), OCe10102-FX-E (CNA),
OCe11102-FM-E (CNA), OCe11102-FX-E (CNA);
Fujitsu Ltd.: MC-CNA102E-F (PY CNA Mezz Card
10Gb 2 Port), SE0X7EC12F (QLE8152-CU),
SE0X7EF12F (QLE8142-SR);
Fujitsu Technology Solutions MC-CNA102E-F (PY
CNA Mezz Card 10Gb 2 Port);
Hewlett Packard HP: CN1000E Dual Port 10Gb
Converged Network Adapter (AW520A), CN1000Q
Dual Port 10Gb Converged Network Adapter
(BS668A), CN1100E Dual Port 10Gb Converged
Network Adapter (BK835A), NC551i Dual Port
FlexFabric 10Gb Converged Network Adapter
(embedded BE2), NC551m Dual Port FlexFabric
10Gb Converged Network Adapter (580151-B21),
NC553i Dual Port FlexFabric 10Gb Converged
Network Adapter (embedded BE3), NC553m Dual
Port FlexFabric 10Gb Converged Network Adapter
(613431-B21);
IBM: 42C1800 (QLE8142 CNA), 42C1820 (1020
CNA)14, 42C1830 (Qlogic 2-port 10Gb CNA CFFh
for IBM BladeCenter), 81Y1650 (Brocade 2-port
10Gb CNA CFFh for IBM BladeCenter), 90Y3566
(Emulex 10GbE Virtual Fabric Adapter Advanced
II)16, 17, 18, 95Y3751 (Emulex Dual port VFA 2+ for
IBM x-Series servers)19;
Intel: X520-DA2, X520-SR1, X520-SR2;
Oracle: SG-(X)EMFCOE2-Q-SR (QEM8152),
SG-(X)EMFCOE2-Q-TA, SG-XPCIEFCOE2-Q-SR
(QLE8142 CNA), SG-XPCIEFCOE2-Q-TA
(QLE8152 CNA)11;
QLogic: QLE8042-CK (CNA), QLE8042-SR-CK
(CNA), QLE8140-SR-E-SP (CNA),
QLE8142-SR-E-SP (CNA), QLE8150-CU-E-SP
(CNA), QLE8152-CU-E-SP (CNA)11,
QLE8240-SR-E-SP, QLE8242-SR-E-SP,
QLE8250-CU-E-SP, QLE8252-CU-E-SP
4
Cisco
Nexus
55481
256
Cisco M61KR-B
Cisco
Nexus
55482
256
Cisco
Nexus
55481, 2
256
Cisco
Nexus
55482
256
Cisco
Nexus
55481
256
256
Cisco
Nexus
55481
256
11
Cisco
Nexus
55481
254
12
Cisco
Nexus
55481
512
13
IBM 5708
Cisco
Nexus
5548
512
14
Cisco
Nexus
55481
512
Return To Top
No. Switch
Switch
Firmware
Revision
Switch
Management
Application
Revision
Interoperable Switch
Cisco
Nexus
5548
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
Brocade 30018
Cisco
Nexus
5548
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
Cisco
Nexus
5548
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
Interoperable
Switch Firmware
ISL
Domain
to
Domain
Topology
31
FC-SW
31
FC-SW
31
FC-SW
v6.1.2b, v6.2.2b,
v6.3.2b, v6.4.1a,
v6.4.2a (T), v6.4.2a(T)
Max #
Domains Max #
per Fabric Hops
v6.2.2b, v6.3.2b,
v6.4.1a, v6.4.2a(T)
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
Cisco
Nexus
5548
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a)
Cisco Fabric
Manager
Cisco
Nexus
5548
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a)
Cisco
Nexus
5548
31
FC-SW
31
1.3(1q), 1.3(1t),
1.3(1w), 1.3(1y),
1.3.(1i), 1.4(1j),
1.4(1m), 1.4(2b),
1.4(3i), 1.4(3m),
1.4(3s), 1.4(3u),
1.4(3y), 2.0(1q),
2.0(1s), 2.0(1t), 2.0(1w),
2.0(2m), 2.0(2q)
FC-SW
Cisco Fabric
Manager
31
1.3(1q), 1.3(1t),
1.3(1w), 1.3(1y),
1.3.(1i), 1.4(1j),
1.4(1m), 1.4(2b),
1.4(3i), 1.4(3m),
1.4(3q), 1.4(3s),
1.4(3u), 1.4(3y),
2.0(1q), 2.0(1s), 2.0(1t),
2.0(1w), 2.0(2m),
2.2(2q)
FC-SW
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a)
Cisco Fabric
Manager
FC-SW
Cisco
Nexus
5548
5.0(2)N1(1),
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a)
Cisco Fabric
Manager
2.0(2m), 2.0(2q)
31
FC-SW
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1),
5.0(2)N2(1)1,
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
Brocade 30018
v6.1.2b, v6.2.2b,
v6.3.2b, v6.4.1a,
v6.4.2a (T), v6.4.2a(T)
32
FC-SW
10
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1),
5.0(2)N2(1)1,
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
32
FC-SW
11
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1),
5.0(2)N2(1)1,
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
v6.2.2b, v6.3.2b,
v6.4.1a, v6.4.2a(T)
32
FC-SW
12
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1),
5.0(2)N2(1)1,
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
v6.2.1b, v6.2.2b,
v6.3.2b, v6.4.1a,
v6.4.2a(T)
32
FC-SW
13
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
N/A
32
FC-SW
14
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1)
Cisco Fabric
Manager
1.0.7.0
32
FC-SW
15
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
Cisco Fabric
Manager
4.1(2)E1(1b)
32
FC-SW
15, 16, 17
15, 16, 17
v6.2.1b, v6.2.2b,
v6.3.2b, v6.4.1a,
v6.4.2a(T)
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1)
Cisco Fabric
Manager
N/A
32
FC-SW
17
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a)
Cisco Fabric
Manager
32
FC-SW
18
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a)
Cisco Fabric
Manager
4.2.7d, 5.0.4b
32
FC-SW
19
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
Cisco Fabric
Manager
4.2(1)N2(1)1,
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
32
FC-SW
20
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
Cisco Fabric
Manager
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
32
FC-SW
21
Cisco
Nexus
5548
5.0(2)N1(1)1,
5.0(2)N2(1)1,
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
Cisco Fabric
Manager
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
32
FC-SW
22
Cisco
Nexus
5548
5.0(2)N2(1),
5.0(3)N1(1c),
5.0(3)N2(2),
5.0(3)N2(2a),
5.0.(3)N2(1),
5.1(3)N1(1),
5.1(3)N1(1a),
5.1(3)N2(1)
Cisco Fabric
Manager
FC-SW
23
Cisco
Nexus
5548
5.0(3)N1(1c),
5.0(3)N2(2),
5.0.(3)N2(1)
Cisco Fabric
Manager
Juniper QFX35002
12.1R1
12
FC-SW
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
55
Fibre Channel Ports on the Nexus 5k that will be connected to non-Cisco switches must be configured as NP ports. This will require that the non-Cisco switch support NPIV.
The QFX3500 switch is supported in the Gateway mode only, at this time.
EMC Celerra (VG series, NS series) and VNX File (VNX5500,VNX5700,VNX7500) appliance port connection using Celerra/VNX Fail Safe Network is supported starting from
firmware version 1.4(2b)
NPV mode, Fibre Channel Ports on the Cisco UCS 6120XP and Cisco UCS 6140XP that will be connected to SAN switches must be configured as NP ports. This will require that
the SAN switch support NPIV.
Switch mode, this mode is supported starting from firmware version 1.4(1m). This mode is supported only with Cisco uplink FC switches. It also allows FC and FCoE storage
directly attached to UCS 61x0 series switches, and requires Cisco FC uplink switch for zoning.
ESX4.X with the M81KR is not supported with switch mode at this time.
HP-UX host cannot access storage directly attached to UCS.
Switch firmware is included in the Cisco UCS code bundle
Switch mode, this mode is supported only with Cisco uplink FC switches. It also allows FC and FCoE storage directly attached to UCS switches, and requires Cisco FC uplink
switch for zoning.
ESX4.X with the M81KR is not supported with switch mode at this time.
HP-UX host cannot access storage directly attached to UCS.
NPV mode, Fibre Channel Ports on the Cisco UCS switches that will be connected to SAN switches must be configured as NP ports. This will require that the SAN switch support
NPIV.
The blade for distance extension is PB-48K-18i
The 10G FC10-6(Xenon) blade is supported for ISL connectivity from Xenon to Xenon only.
The 16-port 8Gbit blade (FC8-16) and the 32-port 8Gbit blade (FC8-32) are supported in the Brocade 48000 or EMC Connectrix ED-48000B chassis running supported FOS
v6.0.0c and up.
The routing feature is available from ESM supported Brocade FOS v6.1.0c onwards. The Brocade Integrated Routing License is required. The switch can act as an FC router
(FCR) only if there are Brocade B-series or M-series switches in the edge fabric. The FCR based scalability limits are provided in the firmware release notes and also apply to all
integrated router based configurations.
When using the Brocade FS8-18 Encryption blade/Connectrix PB-DCX-16EB blade in the Brocade DCX/ED-DCX-B or Brocade DCX-4S/ED-DCX-4S-B, it is required that switches
attached to hosts and targets or those that are part of the encryption flow be operating with the following minimum specified levels:(a) The 2Gb/4Gb Brocade/Connectrix B series
switches must operate with FOS v5.3.1b or later, and
(b)the 4Gb/8Gb Brocade/Connectrix B series switches must operate with FOS v6.1.0e, v6.1.1 or later (4Gb platforms may use v5.3.1b but are recommended to use the supported
v6.x versions)
The Brocade FCoE10-24 FCoE blade/Connectrix PB-DCX-24FCoE blade in the Brocade DCX/ED-DCX-B or in the Brocade DCX-4S/ED-DCX-4S-B is only supported with FOS
v6.4.1_FCoE and v6.4.1_FCoE1.
10
Return To Top
11
No.
1
Reference Architecture
EMC Greenplum Cisco Reference Architecture
Switch
Cisco 4948S (Ethernet)
Interoperable Switch
Cisco Nexus 5548
Interconnect Switch
Nexus 2248
Return To Top
12
No.
1
Reference Architecture
EMC Greenplum Cisco Reference Architecture
Switch
Cisco Nexus 5548
Interoperable Switch
Cisco 2960 (1GbE)
Return To Top
13
No.
1
Item Type
Switch
Item Name
Cisco Nexus 5548
IP Addressing
IPv4
Return To Top
14