Você está na página 1de 2

BURNING GUIDE MAM-E CD-R 90 & 99 minutes

Revision : 1.1 (05/05/03)

For high capacity CD-R (90 minutes & 99 minutes) recording, you should need CD-Recorder that must supports oversize CD-Recording along-with writing software, which also must have over burn facility. This guide explain how to proceed using AHEADs NERO BURNING ROM.

You can download a trial version on Web site www.nero.comProcedure for Recording MAM-E 90Min Disc 1. Install NERO BURNING ROM software & ensure it is working properly with your CD-Recorder. 2. Verify whether the CD-Recorder you are using, supports over burning, Please follow as below: Go to Choose Recorder menu. In this dialog box, see the drive information by selecting your CD-Recorder (drive will be highlighted by selecting). Here you can check that whether your Recorder supports over burn or not support. Hint: Sometimes by writer firmware up gradation also, you can make your CD-Recorder enable for over burn, therefore we strongly recommend to up date your CD-Recorder with latest available firmware.

3. How to check the capacity of CD-R disc you are using for recording. Please follow as below: Go to Recorder menu & then select Medium Info. In this dialog box, you will see that total capacity is 00:00:00 (0 MB) & available capacity 10:00:00 (88 MB).

4. Now, I will explain you how to check amount of data ( Source length ). Please follow as below: Go to File menu & then select Write CD ( If you have not made any compilation earlier then please make it first by selecting New Compilation ). In this dialog box, select Info , this will give you information about amount of data. Please note that this should be always less than Maximum CD Length, which we will select in Expert Feature. Always use disc at-once method only while writing at over sized CD-R.

PAGE 1/2

BURNING GUIDE MAM-E CD-R 90 & 99 minutes


5. Now, the important setting- about Expert Feature & over burn Maximum CD length. Please do the following: Go to File menu, select Preferences, and then select Expert Feature. This is the main area where you have to select Enable over burn & enter 90min 2 sec 0 frame . Then press OK. This will allow you to make over size burning.

Revision : 1.1 (05/05/03)

After making these settings, start writing. When you press write button, it will ask the confirmation about over burn by showing another window. You have to press Write over burn CD.

6. Enjoy your new 90 or 99 minutes compilation !

PAGE 2/2

Você também pode gostar