Você está na página 1de 5

Nama : Luthfi Setioutomo M. Reisyan G. Rika Yanti Wishno Chondro XII TKJ B I. II.

HIERARKI WAN

Pemateri : Rudi Haryadi Dodi Permana Mata Pelajaran : Diagnosa WAN Tanggal :

Tujuan Siswa Dapat memahami komponen pembentuk WAN Pendahuluan 1. Core Fungsi Menjadi Backbone jaringan yang bertanggung jawab pada traffic jaringan Tugas Mengatur Traffic keseluruhan yang besar dengan baik, cepat, dan handal Menguasai traffic besar dan kecepatan jaringan perangkat Perangkat Cisco Router 10000 series

Cisco Nexus 7000 Switch, 9 10 18 slot ( WAN use)

2. Distribution Titik Pemisah (Demarcation Point) antara access layer dengan core layer dan memabntu mendefinisakn dan membedakan core layer Fungsi Mengontrol traffic jaringan dengan pengawasan dan perencanaan broadcast domain dan mengelompokkan lalu lintas pada switch ke subnetwork yang terpisah Tugas Menyediakan routing, filtering dan untuk menentukan cara terbaik utuk menangani permintaan layanan dakam jaringan Perangkat Cisco ASR 1013 Router
o The Cisco ASR 1013 Router supports full-width card modules. It is designed with a single midplane with connectors on one interface midplane. The Cisco ASR 1013 Router supports: Up to 6 ASR1000-SIP40G shared port adapter modules Up to 24 shared port adapters (SPAs) and up to six SIPs Cisco ASR1000-ESP40 Cisco ASR1000-RP2 router processor Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies and two power supply zones. There are two power supplies for power zone 0

o o o o

and two power supplies for power zone 1 (do not mix AC and DC power supplies).

Cisco Nexus 5010 Switch

The Cisco Nexus 5010 Switch foundation is built upon: High-performance 10 Gigabit Ethernet IEEE Data Center Bridging (DCB) for lossless Ethernet Fibre Channel over Ethernet (FCoE) Virtual-machine-optimized networking

The switch delivers more than 500 Gbps of switching capacity with 20 fixed wire-speed 10 Gigabit Ethernet ports that support data center bridging and FCoE. In addition, one expansion port supports one of the following modules: 8-port 1/2/4 Gigabit Fibre Channel 6-port 1/2/4/8 Gigabit Fibre Channel 4-port 10 Gigabit Ethernet (DCB and FCoE) and 4-port 1/2/4 Gigabit Fibre Channel 6-port 10 Gigabit Ethernet (DCB and FCoE)

3. Access i. Fungsi 1. Menyediaka saraa bagi user untuk mengakses jaringan WAN dan mengendalikan perangkat yang diijinkan dan mengakses ii. Tugas 1. Access COntol dan policy yang diteruskan dari layer distribution 2. Collision domain terpisah 3. Koektivitas workgroup kedalam layer distribusi iii. Perangkat 1. Cisco Catalyst 3750-X Series Cisco Catalyst 3750-X and 3560-X

Series:

a. b. c. d. e. f. g.

h.

i.

24 and 48 10/100/1000 PoE+ and non-PoE models Optional four Gigabit Ethernet (GbE) SFP or two 10GbE SFP+ uplink network modules Industry first PoE+ with 30W power on all ports in 1 rack unit (RU) form factor Dual redundant, modular power supplies and fans Media Access Control Security (MACsec) hardware-based encryption IPv4 and IPv6 routing, Multicast routing, advanced quality of service (QoS), and security features in hardware Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement and 90 day access to Cisco Technical Assistance Center (TAC) support Enhanced Cisco EnergyWise for operational cost optimization by measuring actual power consumption of the PoE devices, reporting, and reducing energy consumption across the network USB Type-A and Type-B ports for storage and console respectively and an out-of-band Ethernet management port.

4. Perangkat pembentuk WAN i. DCE (Data Circuit Equipment) = Perangkat yang meletakka data ke local loop , dantugasnya mengkonversi sinyal, <lebih dekat ke CO> ii. DTE (Data Terminal Equipment)= Perangkat pelanggan yang melewatkan data ke DCE <lebih dekat ke pengguna> iii. CPE ( Customer Premise Equipment)= Peralatan networking yang dipasang pada pelanggan dan dikoneksikan ke peraltan networking jasa telekomunikasi iv. CO (Central Offcie) = Pusat pensaklaran dimana hubungan diantara beberapa saluran pelanggan dibuat v. Local loops = jaluir antara CO dengan Demarc vi. Demarc = Pemisah antara CO dan CPE III. IV. Hasil Kerja Hasil Kerja 1. Buat sebuah topologi dan tentukan Hierarki WAN-nya

Gambar 1 V. Kesimpulan Siswa Dapat memahami komponen pembentuk Wide Area Network

Você também pode gostar