Escolar Documentos
Profissional Documentos
Cultura Documentos
IT1
PARTS LOCATION
for PZEV:
IT
A135059E06
IT2
SYSTEM DIAGRAM
ECM
VCIA
103 C24 VCIA 93 C24 IACA 126 C24 EIA L 33 A24 IAC+
IACA
B-W
EIA
IAC+
9 CA2 19 CA2
IT
IAC-
A24 IAC-
A135688E02
IT3
ON-VEHICLE INSPECTION
1. INSPECT INTAKE AIR CONTROL VALVE ASSEMBLY (a) Inspection procedure when using the intelligent tester: (1) Warm up the engine. (2) Stop the engine. (3) (4) (5) (6) Connect the intelligent tester to the DLC3. Turn the ignition switch on (IG). Turn the tester on. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / INTAKE CTL VSV1. Press the right or left button. (7) Make sure that a clicking sound is heard from the intake air control valve when current flows. If the result is not as specified, replace the intake air surge tank.
Intelligent Tester
DLC3
CAN VIM
C131977E05
IT
IT4
2AZ-FE ENGINEINTAKE
IT
IT5
FRONT WIPER ARM AND BLADE ASSEMBLY RH FRONT FENDER TO COWL SIDE SEAL RH
20 (204, 15)
IT
IT6
x2 x5
GASKET
IT
20 (205, 15)
Non-reusable part
A135660E04
IT7
REMOVAL
1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY HINT: (See page ES-510) REMOVE INTAKE AIR CONTROL VALVE (a) Remove the intake air control valve.
2.
A135692
INSPECTION
1.
5 (IAC+)
4 (IAC-)
INSPECT INTAKE AIR CONTROL VALVE (a) Inspection procedure when applying voltage between the terminals: (1) Apply battery voltage between terminals 4 (IAC+) and 5 (IAC-) of the intake air control valve. The actuator should continue to keep the valve open.
IT
A135693E01
INSTALLATION
1. 2. INSTALL INTAKE AIR CONTROL VALVE (a) Install the intake air control valve. INSTALL INTAKE AIR SURGE TANK ASSEMBLY HINT: (See page ES-511)
A135692