Escolar Documentos
Profissional Documentos
Cultura Documentos
Self Diagnosis
Supported model
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to ash. The number of times the LED ashes translates to a probable source of the problem. A de nition of the STANDBY LED ash indicators is listed in the instruction manual for the users knowledge and reference. If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
2 times
Standby LED
Power LED
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY
Channel 5
Volume -
POWER .
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
SELF CHECK Back 002 003 003 004 005 005 005 005 006 007 00000 << 001 000 000 000 000 000 000 000 000 000 [Menu] Exit
MAIN_POWE AUD_PORT DC_ALERT BALANCER TCON_ERR HFR_ERR P_ID_ERR PANEL_POWE BACKLITE TEMP_ERR 00010 00000
001 indicates an error was detected 000 indicates no error was detected
Panel Operation Time by Hour (max 99999) Boot Count (max 99999) Total Operation Time by Hour (max 99999)
Channel 0 .
POWER
NOTE: The Service Mode information will be covered in the training manual for these models. 3. To exit service mode, turn the POWER off.
5 VOLUME+
RM-YD034
SERVICE ADJUSTMENTS
2-1-2. ACCESSING FACTORY MODE
1. TV must be turned On. (POWER On) 2. Press the following buttons on the Remote Commander within a second of each other:
Factory Mode Input Source Aging Mode Internal Pattern EDID WP Site Air Channels Site Cable Channels White Balance Color Temp ADC Calibration Factory Reset (limited) Auto Phase Factory Reset (default) <[ <[ <[ <[ <[ <[ <[ Video 1 Off Off Protection Off Off Off >> >> Off Off Off ]> ]> ]> ]> ]> ]> ]> Off
MUTING
MUTING
MENU
MUTING
NOTE: The Factory Mode information will be covered in the training manual for these models. 3. To exit service mode, turn the POWER off.
RM-YD034