Escolar Documentos
Profissional Documentos
Cultura Documentos
C A T A L O G
J A N U A R Y
2 0 1 2
Table of Contents
POWERWAVE
Table of Contents
Page Base Station Products and Solutions Power Amplifier Solutions MCPA Modules Single MCPA Outdoor Booster Systems Dual MCPA Outdoor Booster Systems Triple MCPA Outdoor Booster Systems TMA Products Tower Mounted Amplifiers Power Distribution Unit Current Injectors Filters Diplexer/Crossband Combiners Duplexers Same Band Combiners T1 Triplexer/Crossband Combiners Interference Filters RMDU and Enclosure Solutions MicroFlex Outdoor Enclosures RapidFlex Outdoor Enclosures SubTerra Controlled Environment Vault VersaFlex Shelter Solutions Coverage Products and Solutions Repeater Products Channel Selective Standard Repeaters Band Selective Compact Repeaters Band Selective Standard Repeaters Advanced Train Repeaters Digital Repeaters In-Building and Outdoor DAS Products Repeater Products Bi-Directional Amplifiers Fiber Optic DAS Master Unit LinkNet Convergence Platform Tap-In Signal Distribution Taps Nexus FT Public Safety DAS Products Wide Band Radio Heads Nexus FT Single and Dual Band Nexus FT Rack Mounts Repeater Remote Management Products Base Station Management Interface IP/SNMP/GPS Repeater Remote Management Interface Antenna Products Broadband Antennas Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz Low Broadband Cross Polarized Antennas, 806-960 MHz Low Broadband Cross Polarized Antennas, 698-894 MHz Dual Broadband Antennas Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
6 14 20 24 31 68 72 79 85 86 90 91 95 98 100 102
203 206 208 216 218 220 223 259 265 267
368
Table of Contents
POWERWAVE
Table of Contents
Page Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz Single and Dual Band Antennas Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz X-Urban Cross Polarized Antennas, 824-896/870-960 MHz Vertical Polarized Omni Vertical Polarized Antennas, 806-896 MHz Urban Vertical Polarized Antennas, 824-896/870-960 MHz Dual Band Antennas Vertical Polarized ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz iRET Low Broadband Cross Polarized iRET Antennas, 698-894MHz Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz Dual High Broadband Cross Polarized iRET Antennas, 2300-2700 MHz iDiplexer Antennas Multi Broadband Cross Polarized Antennas Remote Electrical Tilt (RET) Single Band RET Dual Band RET Triple Band RET iRET Antenna Controller Module 8510 Master Control Unit Current Injector Layer One Converter RET System Cables Indoor Antennas Dual Band Indoor Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz Multiband Indoor Antennas Vertical Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz Clean Site Solutions Mounting Solutions Antenna FAQ Network Management Part Number Index 375
438 452 456 463 483 489 493 496 502 508 517 520 523 526 533 538
543
Power wave
POWERWAVE
Power Amplifier Solutions MCPA Modules Single MCPA Outdoor Booster Systems Dual MCPA Outdoor Booster Systems Triple MCPA Outdoor Booster Systems TMA Products Tower Mounted Amplifiers Power Distribution Units Current Injectors Filters Diplexer/Crossband Combiners Duplexers Same Band Combiners T1 Triplexer/Crossband Combiners Interference Filters
Page
6 14 20 24
31 68 72
79 85 86 90 91
Power wave
Powerwave offers one of the industrys largest and most diverse line of power amplifier systems for cellular, EGSM, DCS, PCS, AWS and UMTS wireless networks, with more than 350,000 MCPAs and SCPAs deployed worldwide. One key reason for this success is that we are able to rapidly roll out new solutions by leveraging the modular architecture of existing systems. Building upon field-proven products and technologies, our RF engineers are able to shorten design time and deliver systems with industryleading efficiency, packaging density and reliability to help service providers reduce both operating and capital expenses within their network while increasing revenues.
MCPA Modules Single MCPA Outdoor Booster Systems Dual MCPA Outdoor Booster Systems Triple MCPA Outdoor Booster Systems
POWERWAVE
MCPA Modules
Title 180W Multi-Carrier Power Amplifier 160W Multi-Carrier Power Amplifier 135W Multi-Carrier Power Amplifier 120W Multi-Carrier Power Amplifier 170W Multi-Carrier Power Amplifier 140W Multi-carrier Power Amplifier
Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA
Page 7
850
G3L-850-160
900
G3L-929-135
10
1800
G3L-1829-120
11
1900
G3L-1929-160
12
2100
G3L-2129-140
13
G3L-850-180
Introduction:
The G3L-850-180 is a high performance Multi-Carrier Power Amplifier (MCPA) intended for Cellular applications. This PA utilizes Powerwaves feed-forward linearization technique to provide maximum operating BW and compatibility with 2G, 3G and 4G air interface standards. Latest generation devices and biasing schemes provide industry leading efficiency, RF output power and spectrum performance allowing significant savings in OPEX and CAPEX.
Features:
q
Automatic Power Control (APC) @ 210W Phase matched for parallel combining Internal monitoring and alarming for VSWR, linearization, voltage, overpower Backward compatible with legacy MCPA systems Common form-factor with PCS and AWS models
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Bandwidth (MHz) Instantaneous Bandwidth (MHz) Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range (DC) DC Input Current Alarms and Protections 869 ~ 894 25 25 GSM, EDGE, CDMA2000, WCDMA, LTE 23% 180W FCC & Air Interface Compliant -13dBm/1MHz 63dB +/-0.5dB +/-0.5dB 14dB 16dB +22V ~ + 30V 29A @ +27V, 180W RF Ouput VSWR, Temp, Overpower, PSU, Linearization
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
G3L-850-180
MECHANICAL SPECIFICATIONS
Dimension HxWxD, ft. (mm) Weight, lbs (kg) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output Serial Interface (GUI)
12 x 4 x 16 (354.6 x 95.6 x 450) 24.3 (11.0) PDM (D-Sub 17/21 Blind Mate) PKZ (D-Sub 17/21 Blind Mate) PKZ (D-Sub 17/21 Blind Mate) D-Sub 17/21 Blind Mate RJ-11 Jack
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -20oC ~ +50oC -40oC ~ +70oC 5% ~ 80% RH 5% ~ 95% RH
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
POWERWAVE
G3L-850-160
ELECTRICAL SPECIFICATIONS* Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 850 869-894 25 GSM/EDGE/CDMA2000/WCDMA 18% 160W (Typical) -65 dBc Better than -13 dBm/ 1MHz 63 dB 0.5 dB 0.5 dB +/-0.5 dB 16 dB (Max) 16 dB (Max) 26 to 28 Vdc (+21 to 30 Vdc Operational) Typical: 30.5A (GSM), 29 (CDMA) Input over power, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS* Dimension HxWxD, mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 24.3 N/A Sub-miniature Combo D connector for RF & Digital interfaces N/A N/A
ENVIRONMENTAL SPECIFICATIONS* Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 to 70 C 0% to 80% (non condensing) 0% to 95% (non condensing)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
G3L-929-135
ELECTRICAL SPECIFICATIONS* Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 900 925-960 MHz 25 MHz GSM/EDGE/CDMA2000/WCDMA 19% 135W (Typical) -65 dBc (Typical) Better than -13 dBm/1 MHz 63 dB 0.5 dB 0.5 dB 0.5 dB 14 dB (Max) 16 dB (Max) 26 to 28 Vdc (21 to 30 Vdc Operational) 26A (nominal at rated power) Input over drive, VSWR, DC failure, High temperature, Loop failure, APC
MECHANICAL SPECIFICATIONS* Dimension HxWxD, mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 20 21W4 Combo-D w/size 8 contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D w/PkZ contact 21W4 combo-D
ENVIRONMENTAL SPECIFICATIONS* Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 C to 70 C 5% to 95% non-condensing 5% ro 95% non-condensing
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
10
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
G3L-1829-120
ELECTRICAL SPECIFICATIONS* Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 1800 1805-1880 35 GSM/EDGE/CDMA2000/WCDMA 13.4% (GSM) Typical: 120W -65 dBc (Typical) Better than -13 dBm/ 1MHz 63 dB +/- 0.5 +/-0.3 dB +/-0.5 dB 17 dB (Max) 18 dB (Max) 26 to 30 /Vdc (22 to 30 Vdc Operational) Typical: 33A (GSM), 31A (CDMA) Input over drive, VSWR, DC failure, High temperature, Loop failure, APC
MECHANICAL SPECIFICATIONS* Dimension HxWxD, mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 23 21W4 Combo-D w/size 8 contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D
ENVIRONMENTAL SPECIFICATIONS* Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 to 70 C 5% to 95% (non condensing) 5% to 95% (non condensing)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
11
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
G3L-1929-160
ELECTRICAL SPECIFICATIONS* Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections PCS 1930-1995 Up to 65 GSM/EDGE/CDMA2000/WCDMA 18.5% 170 Watts (Typical) -65 dBc Better than -13 dBm/ 1MHz 63 dB 0.5 dB 0.5 dB +/-0.5 dB 16 dB (Max) 16 dB (Max) 26 to 28 Vdc (+21 to 30 Vdc Operational) 34A@170W, 33A@160W Input over power, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS* Dimension HxWxD, mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 26.4 N/A Sub-miniature Combo D connector for RF & Digital interfaces N/A N/A
ENVIRONMENTAL SPECIFICATIONS* Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 to 70 C 0% to 80% (non condensing) 0% to 95% (non condensing)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
12
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
G3L-2129-140
ELECTRICAL SPECIFICATIONS* Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 2100 2110-2170 60 MHz CDMA2000/WCDMA/LTE > 15% (45 MHz IBW), >14% (60 MHz IBW) 140W Spurious Emissions - 3GPP TS25.141 Air interface compliant. -13 dBm (Max.) 1 MHz Bandwidth; -50 dBc (Max.) 63 dB +/-0.5 dB +/-0.5 dB 14 16 +26 to +28 Vdc Nominal (+21 to +30 Operational) 34.5A (Nominal, at 27V, 140W output) Input over drive, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS* Dimension HxWxD, mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 500 (incl handles) (13.96 H X 3.9 W X 19.7 D) 28.5 21W4 Combo-D w/size 8 contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D
ENVIRONMENTAL SPECIFICATIONS* Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -20 C to +50 C -40 to +85 C 5% to 90% (non condensing) 5% to 90% (non condensing)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
13
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA
Page 15
900
OS-0951-P0-XXX
16
1800
OS-1851-H0-XXX
17
1900
OS-1951-E0-XXX
18
2100
OS-2151-E0-XXX
19
14
POWERWAVE
OS-0851-P0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA/WCDMA 869-894 824-849 120** -65* dBc 25 0 to +20 2.5* (-000 version) 180-264 VAC or +27VDC 2.5 @ max gain, 3.0 @ min gain* (-003 version) 0 to +13.0 variable (-003 version) +12 min (-003 Version) 100 min 7.0 (+/- 2 dB) (-003 version) 15 min 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 228 X 660 X 660 (9x 22 x 22) 102 7/16 DIN female X 6 1 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20us waveform
ORDERING INFORMATION Model Number 930-00018-009 (optional) MCPA Modules: G3L-850-160 160W MCPA Module 1 Description 3 KW Rectifier Quantity 1
Choose one of the following Enclosures: OS-0851-P0-000 OS-0851-P0-003 Enclosure -TMA model Enclosure - LNA model with VSWR monitor 1 1
* Typical Performance. ** Typical, with G3L-850-160 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
15
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-0951-P0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/WCDMA 925-960 880-915 105 Watts** Spurious Emissions - 3GPP TS45.005 & TS25.141 Air Interface Compliant 35 0 to +20.0 variable 2 dB* (-100 model) 94-264 VAC (Single Phase) or +27VDC 2.5* @ max. gain, 3.5* @ min. gain (-103 version) 0 to +14.0 variable (-100 model) > 0 dBm 100 min. 0-10 dB output RL 14 min. 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 620 X 284 X 716 (24.4x 11.18 x 28.18) 50 Kg (110 lbs) 7/16 DIN Female X 4 1 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -30 to +50 IP54 40kA per line, 8/20 us waveform
ORDERING INFORMATION Model Number Choose one enclosure: OS-0951-P0-104 OS-0951-P0-103 Amplifier Module: G3L-929-135 135W MCPA Module 1 1 sector, with LNA, includes rectifier and modem 1 sector, with LNA, includes rectifier 1 1 Description Quantity
* Typical Performance. ** Typical, with G3L-929-135 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
16
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1851-H0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) 15 min. 50 GSM/EDGE/CDMA/WCDMA 1805-1880 1710-1785 90** Watts -65* dBc 45 0 to +14 2dB* (-000 version) 94-264 VAC (Single Phase, 47-63Hz) or +27VDC 2.3* @ max. Gain, 1.89* @ min. Gain 0 to +13.0 variable (-003 version) +12 min. 100 min.
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 610 X 284 X 716 (24x 11 x 28) 102 7/16 DIN Female X 6 1 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION Model Number G3L-1829-120 Description 120W MCPA module Quantity 1 1 Choose one of: OS-1851-H0-000 OS-1851-H0-003 Enclosure - TMA model - DC transparency Enclosure - LNA model - includes VSWR monitor, lightning arrestors 1 1
* Typical Performance. ** Typical, with G3L-1829-120 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
17
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1951-E0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM, EDGE,CDMA,WCDMA 1930-1990 1850-1910 125** Watts -65 dBc 65 0 to +20 variable 2 dB (-100 series) 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC 2.5 dB max (all models except -100) 0 to +14 dB (all models except -100) > 0 dBm 100 dB min 0-10 dB output RL 14 dB min 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 620 X 284 X 716 (24.4x 11.18 x 28.18) 110 (50 Kg) 7/16 DIN Female X 6 1 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -30 C to +50 C IP54 40 KA per line, 8/20 us WF
ORDERING INFORMATION Model Number Enclosures (Select one): OS-1951-E0-102 MCPA Module G3L-1929-160 Alternatively, select a Kit: INST-OS-1951-103 Kit includes: G3L-1929-160 amplifier module OS-1951-E0-102 enclosure 1 1 160W 1900 MHz MCPA 1 1 sector, with LNA, includes rectifier 1 Description Quantity
* Typical Performance** Typical, with G3L-1929-160 inserted, 45 MHz IBWAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
18
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-2151-E0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM,EDGE,CDMA,WCDMA 2110-2155 (AWS, -4XX series), 2110-2170 (UMTS, -1XX series) 1710-1755 (AWS, -4XX series), 1920-1980 (UMTS, -1XX series) 100W** Spurious Emissions - 3GPP TS25.141 Air interface compliant. 45 (AWS, -4XX series) 60 (UMTS,-1XX series) 0 to +20 variable 2 dB (-100,-400 models) 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC 2.5 dB max (-101,-401 models) 0 to +14 dB adjustable (-101,-401 models) >0 dBm 100dB min. 0-10 dB output RL (selectable) 14 dB min. 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 620 X 284 X 716 (24.4x 11.18 x 28.18) 110 (50 Kg) 7/16 DIN Female X 4 1 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -30 C to +50 C IP54 40kA per line, 8/20 us WF
ORDERING INFORMATION Model Number Enclosures (select one) OS-2151-E0-101 OS-2151-E0-104 OS-2151-E0-401 OS-2151-E0-404 MCPA Module: G3L-2129-140 140W MCPA module 1 LNA model - UMTS (Band Class 1) w/rectifier LNA model - UMTS (Band Class 1) w/rectifier and modem LNA model - AWS (Band Class 4) w/rectifier LNA model - AWS (Band Class 4) w/rectifier and modem 1 1 1 1 Description Quantity
19
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Page 21
1800
OS-1821-H0-XXX
22
1900
OS-1921-H0-XXX
23
20
POWERWAVE
OS-0921-V0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) EGSM/EDGE 925-960 880-915 180** Watts -65* dBc 25 1 MCPA Module 0 to 17.5, 2 MCPA Module 0 to 20.5 2dB*(-000 variant), 0.5dB*dB (bypass mode) 180-264 VAC, 47-63 Hz Single Phase, or +27VDC 2.5* @ max. Gain, 3.5* @ min. Gain (-001 and -003 variants) 0 to +11.0 variable (-001 and -003 variants) +12 min. 90 min. 9.5 (+/-2dB) (-003 variant) 14 min. 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 407 x 865 x 840 (14x 210x 29) 151-183 7/16 DIN Female X 4 1 or 2 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 to +50 IP54 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION Model Number G3L-929-135 1001308 Choose one of the following Enclosures: OS-0921-V0-010 OS-0921-V0-011 OS-0921-V0-013 Enclosure - TMA model - 12V supply to TMA Enclosure - LNA model Enclosure - LNA model with VSWR monitor 1 1 1 Description 135W MCPA module Rectifier Quantity 1-2 2-3
21
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1821-H0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE 1805-1880 1710-1785 160** Watts -65* dBc 35 1 MCPA Module 0 to +12, 2 MCPA Module 0 to +15 2.5dB*, 0.5dB* (bypass) 180-264 VAC, 47-63 Hz Single Phase, or +27VDC 2.5* @ max. Gain, 3.5* @ min. Gain (-001 version) 0 to +12.0 variable (-001 version) +12dBm min. 100 min. N/A 14 min 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 407 x 865 x 840 (14x 210x 29) 151-183 7/16 DIN Female X 4 2 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION Model Number G3L-1829-120 1001308 Choose one of the following Enclosures: OS-1821-H0-004 OS-1821-H0-005 TMA Model - 12VDC supply to TMA LNA Model 1 1 Description 120W MCPA Module AC Rectifier Quantity 1-2 2-3
* Typical ** Typical, with two G3L-1829-120 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
22
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1921-H0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA/WCDMA 1930-1990 1850-1910 160** Watts -65* dBc 45/60 1 MCPA Module 0 to +12, 2 MCPA Modules 0 to +15 2.5* 180-264 VAC, 47-63 Hz Single Phase, or +27VDC N/A N/A N/A 100 dB min N/A 14dB min. 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 407 x 863 x 838 (16x 34x 33) 151-183 7/16 DIN Female X 8 2 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION Model Number 930-00018-009 OS-1921-H0-000 Description 3 KW rectifier Enclosure - TMA model - DC transparency or TMA bias Function (configurable) Compatible with MCPA Module: G3L-1929-120 120W MCPA module 1-2 Quantity 1-2 1
* Typical ** Typical, output power at antenna port with 2 G3L-1929-120 modules installed, 45 MHz IBW. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
23
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Title OS-3 3 Sector Outdoor System OS-3 3 Sector Outdoor System OS-3 3 Sector Outdoor System OS-3 Outdoor System OS-3 3 Sector Outdoor System
Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA
Page 25
1800
OS-1833-E0-XXX
26
1900
OS-1933-E0-XXX
27
1900
OS-1991-H0-XXX
28
2100
OS-2133-E0-XXX
29
24
POWERWAVE
OS-0933-E0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA/WCDMA 925-960 880-915 110 W* -63 dBc* 35 (with G3L-929-135 module) 0-17 Variable 0.5dB* (RF Bypass Mode) 180-264 VAC, -48VDC (-103 model) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain) 0-12 dB 0.0 100 Adjustable 14 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 16 W x 40 H x 38 D 385 (175 kg) 7/16 DIN-F, N-F 1 3
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION Model Number OS-0933-E0-003 Description OS-3, 900 MHz, Trident 3 Sector, 3I/3O Includes: G3L-929-135 modules RF Conditioning Units (RFCU) 220VAC Rectifiers OS-0933-E0-103 -48VDC version of OS-0933-E0-003 Includes four -48VDC rectifiers instead of 220VAC rectifiers OS-0933-E0-001 OS-3, 900 MHz, Trident 1 Sector, 3I/3O Includes: G3L-929-135 module RF Conditioning Unit (RFCU) 220VAC Rectifiers INST-0933-E0-001 1 Sector Upgrade Kit Includes: G3L-929-135 module RF Conditioning Unit (RFCU) 220VAC Rectifier 1 1 1 1 1 1 2 Quantity 1 3 3 4
25
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1833-E0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA/WCDMA 1805-1880 1710-1785 100 W* -63 dBc* 75 (with G3L-1829-120 module) 0-17 Variable 0.5dB* (RF Bypass Mode) 180-264 VAC, -48VDC (-103 model) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain) 0-12 dB 0.0 100 Adjustable 14 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 16 W x 40 H x 38 D 385 (175 kg) 7/16 DIN-F, N-F 1 3
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION Model Number OS-1833-E0-003 Description OS-3, 1800 MHz, Trident 3 Sector, 3I/3O Includes: G3L-1829-120 modules RF Conditioning Units (RFCU) 220VAC Rectifiers OS-1833-E0-103 -48VDC version of OS-1833-E0-003 Includes four -48VDC rectifiers instead of 220VAC rectifiers OS-1833-E0-001 OS-3, 1800 MHz, Trident 1 Sector, 3I/3O Includes: G3L-1829-120 module RF Conditioning Unit (RFCU) 220VAC Rectifiers INST-1833-E0-001 1 Sector Upgrade Kit Includes: G3L-1829-120 module RF Conditioning Unit (RFCU) 220VAC Rectifier 1 1 1 1 1 1 2 Quantity 1 3 3 4
26
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1933-E0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA2000/WCDMA 1930-1995 1850-1915 150W* -65 dBc* 65 (with G3L-1929-160 module) 0-17 Variable 0.5dB* (RF Bypass Mode) 180-264 VAC, -48VDC (-103 model) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)* 0-12 dB 0.0 100 Adjustable 14 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 16 W x 40 H x 38 D 385 (175 kg) 7/16 DIN-F, N-F 1 3
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION Model Number OS-1933-E0-003 Description OS-3, 1900 MHz, Trident 3 Sector, 3I/3O Includes: G3L-1929-160 modules RF Conditioning Units (RFCU) 220VAC Rectifiers OS-1933-E0-103 -48VDC version of OS-1933-E0-003 Includes four -48VDC rectifiers instead of 220VAC rectifiers OS-1933-E0-001 OS-3, 1900 MHz, Trident 1 Sector, 3I/3O Includes: G3L-1929-160 module RF Conditioning Unit (RFCU) 220VAC Rectifiers INST-1933-E0-001 1 Sector Upgrade Kit Includes: G3L-1929-160 module RF Conditioning Unit (RFCU) 220VAC Rectifier 1 1 1 1 1 1 2 Quantity 1 3 3 4
27
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-1991-H0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA2000/WCDMA 1930-1995 1850-1915 335** Watts -65* dBc 45/65 duplex/simplex: 3 MCPAs: 0.0 to +16.2/17.0, 2 MCPAs: 0 to 14.4/15.2, 1 MCPA: 0 to +11.4/12.2 3.0 max (-003, -103, -200 versions) -36 to -60VDC (-103 version), 180-264VAC (-003,-004 versions),+26-28VDC (-200 version) 2.5 at max Rx gain (-004 version) 0-12 dB in 1 dB increments (-004 version only) 0.0 (-004 version only) 100 min N/A 14 min. 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 405 x 774 x 864 (14x 26x 210) 255 lbs, fully populated, with 3 MCPA modules 7/16 DIN Female 3 1
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION Model Number Choose one of: G3L-1929-160 G3L-1929-120 Choose one of: OS-1991-H0-003 OS-1991-H0-004 OS-1991-H0-103 OS-1991-H0-200 220 VAC Enclosure - TMA model 220 VAC Enclosure - LNA with DC bypass option for TMA bias -48 VDC Enclosure - TMA model +27 VDC Enclosure - TMA model 1 1 1 1 160W MCPA module 120W MCPA module 1-3 1-3 Description Quantity
* Typical performance**Typical, with 3 G3L-1929-160 modules, 45 MHz IBW.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
28
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
OS-2133-E0-XXX
ELECTRICAL SPECIFICATIONS Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) GSM/EDGE/CDMA2000/WCDMA 2110-2170 (UMTS, -X1X series), 2110-2155 (AWS, -X4X series) 1920-1980 (UMTS, -X1X series), 1710-1755 (AWS, -X4X series) 105W** -65 dBc* 60 (UMTS, -X1X series) 45 (AWS, -X4X series) 0-17 Variable 0.5dB* (RF Bypass Mode) 180-264 VAC (-0XX series), -48VDC (-1XX series) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain) 0-12 dB 0.0 100 adjustable 14 50
MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 16 W x 40 H x 38 D 385 (175 kg) 7/16 DIN-F, N-F 1 3
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20
ORDERING INFORMATION Model Number OS-2133-E0-013 OS-2133-E0-043 OS-2133-E0-113 OS-2133-E0-143 Description Enclosure: 3I3O, UMTS (Band 1),220 VAC Enclosure: 3I3O, AWS (Band 4),220 VAC Enclosure: 3I3O, UMTS (Band ),-48 VDC Enclosure: 3I3O, AWS (Band 4),-48VDC Models above include: G3L-2129-140 amplifier modules Frequency-specific RF Conditioning Units 220 VAC Rectifiers (AC enclosures only) OS-2133-E0-041 Enclosure: 3I3O, AWS (Band 4), 220 VAC Incl: G3L-2129-140 amplifier module AWS RF Conditioning Unit 220VAC Rectifiers INST-2133-E0-041 AWS Upgrade Kit, includes: G3L-2129-140 amplifier module AWS RF Conditioning Unit 220 VAC Rectifier 3 3 4 1 1 1 2 1 1 1 Quantity 1 1 1 1
* Typical Performance** Typical, with G3L-2130-140 MCPA Module Inserted, 45 MHz IBW
29
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
TMA Products
Power wave
POWERWAVE
TMA Products
Tower Mounted Amplifiers
Page
33 35 37 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55
TMA-DD 1800 Twin AISG 2.0 1710-1785 TMA-DD 1800 Twin AISG 2.0 1710-1785 TMA-DD 1800 Twin AISG 2.0 1710-1785
31
POWERWAVE
TMA Products
Tower Mounted Amplifiers
TMA Type
TMA-DD 1900 Twin TMA-DD 1900 Twin
Up-Link (MHz)
1850-1910 1850-1910
Down-Link (MHz)
1930-1990 1930-1990
Part Number
LGP186nn LGP18611
Page 56 57 58 59 60 61 62 63 64
65 66 67
2110-2170 with 698746 bypass 2110-2170 with 698746 bypass 2110-2155 2110-2170 728-746 and 21102170 728-746 and 21102170 869-894 /1930-1990 1930-1990 with 824894 bypass 935-960 935-960
TSAW-07BP111-001 TTAW-07BP111-001 TTAW-0000112-001 TTAW-60BW111-001 TS07-AWDB111-001 TS07-AWDB112-001 TT08-19DB111-001 TT19-08BP111-001 TU09-000001n-001 TU9E-28BW01n-00n
TMA Twin Dual Band 1710-1770 with 698-746 AWS with 700 Bypass bypass TMA Micro Twin AWS TMA Micro Twin AWS TMA Dual Band 700/AWS TMA Dual Band 700/AWS TMA Twin 850/1900 Dual Band TMA Twin 1900 with 850 Bypass ACTIVE UGC 900 ACTIVE UGC 900 1710-1755 1710-1770 698-716 MHz and 17101770 MHz 698-716 MHz and 17101770 MHz 824-849 /1850-1910 1850-1910 with 824-894 bypass 890-915 890-915
32
LGP215nn
Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band
Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive sensitivity the uplink coverage and capacity is increased and mobile talk time extended. Powerwave Twin 2100 TMA offers state of the art performance, size and weight enclosure in Twin configuration, two TMAs in one housing with market leading reliability.
Features:
q
AISG 1.1 and 2.0 compatible Current Alarm Mode (When no AISG is connected) Twin configuration, 2 TMAs in one and same housing Market leading reliability Low Noise Figure Low TX insertion loss Easy to install wall mount bracket and hose clams for pole mount included No Maintenance
ELECTRICAL SPECIFICATIONS
Uplink Frequency Range (MHz) Rejection Gain (dB) Return Loss Noise Figure UL Output 3rd Order Intercept Point (dBm) Bypass Loss (dB) Max Input Power (dBm) Downlink Frequency Range (MHz) Return Loss Insertion Loss (dB) Intermodulation Power Handling, RMS Power Supply & Alarm Input Voltage (V) Alarm Functionality Power Consumption AISG Compatibility AISG Mode: 10-30; Current alarm mode: 9 -17 AISG Compatible. In case of no AISG command received current alarm mode. LGP21509, 19: 170-190 mA; LGP21508, 18: current alarm compatible with PDU LGP121nn @12 VDC, 1.5 W per LNA LGP21508, 09 AISG 1.1 (field upgradable to AISG 2.0); LGP21518, 19 AISG 2.0 2110-2170 >20 dB 0.3 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <-125 dBm, referred to Antenna port >49 dBm (4x43 dBm) 1920-1980 >85 dB (2110-2170 MHz) 12 >18 dB 1.4 dB, Typical +25, Typical <2.0 dB, Typical +14
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
33
LGP215nn
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch) Weight (lbs) Color RF Connectors Mounting Kit 154 x 192 x 50 (6x8x2) 2.5kg (5.5 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included
ENVIRONMENTAL
Temperature Range Operational Transport Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours IP65 and IP68
MECHANICAL OUTLINE
INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two hose clamps are included in the TMA package. The TMA can be installed in all directions except flat with backside up 30. Ground the TMA and torque the jumper cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA Installation and Service Manual 044-05214. Seal the 7/16 connectors according to the in the package enclosed instruction 100-11279-001.
ACCESSORIES
LGP21301, LGP21302 LGP23301, LGP23303 LGP12101, 02, 03, 04 D100301, LG705 D105104, D105103 D100315, D100313 Outdoor Current Injector (01 female , 02 male ANT conn.) Outdoor Current Injector (01 female , 02 male ANT conn.) Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19) Indoor CIN cable (01: 7m, 05: 3m) Outdoor CIN Cable (04: 10.3m, 03: 3m) PDU Alarm Cable (15: 7m, 13: 3m) D100314, D100312 7060.00, 7060.05 7060.10, 7060.15 7070.10, 7070.30, 7070.50 PDU Power Cable (14: 7m, 12: 3m) CILOC (ANT) CILOC (BTS) MCU (10: AC, 30: 24V, 50: -48V)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
34
TT26-0000112-0n1
TMA Twin 2600 12 dB AISG 2.0
Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive sensitivity the uplink coverage and capacity is increased and mobile talk time extended. Powerwave Twin 2600 TMA offers state of the art performance, size and weight enclosure in Twin configuration, two TMAs in one housing with market leading reliability.
Features:
q
AISG compatible Current Alarm Mode (When no AISG is connected) Twin configuration, 2 TMAs in one and same housing Market leading reliability State of the art low Noise Figure Low TX insertion loss Easy to install, wall mount bracket and hose clams for pole mount included No Maintenance
ELECTRICAL SPECIFICATIONS
Uplink Frequency Range (MHz) Rejection Gain (dB) Return Loss Noise Figure UL Output 3rd Order Intercept Point (dBm) Bypass Loss (dB) Max Input Power (dBm) Downlink Frequency Range (MHz) Return Loss Insertion Loss (dB) Intermodulation Power Handling, RMS Power Supply & Alarm Input Voltage (V) Alarm Functionality Power Consumption AISG Compatibility AISG Mode: 10-30; Current alarm mode: 8 -30 AISG compatible or in case of no AISG command received current alarm mode 170-190 mA <1.1 W per branch @ 12V AISG 2.0 2620-2690 >18 0.4, Typical @ 2 x +43 dBm Tx carriers in receive band, < -117 dBm, reffered to antenna port >52 dBm (>160W) 2500-2570 >85 dB 12 >18 1.1 dB, Typical (TT26-0000112-011); 1.3 dB (TT26-0000112-001) >+24 <2.0, Typical (Valid for TT26-0000112-001, TT26-0000112-011 without bypass) +14
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
35
TT26-0000112-0n1
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch) Weight (lbs) Color RF Connectors Mounting Kit 239x172x73 mm (9.4x6.8x2.9) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included
ENVIRONMENTAL
Temperature Range Operational Transport Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to + 149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours IP65 and IP68
MECHANICAL OUTLINE
INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two hose clamps are included in the TMA package. The TMA can be installed in all directions except flat with backside up 30. Ground the TMA and torque the jumper cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA Installation and Service Manual 044-05214.
ACCESSORIES
LGP21301, LGP21302 LGP23301, LGP23303 LGP12101, 02, 03, 04 D100301, LG705 D105104, D105103 D100315, D100313 Outdoor Current Injector (01 female , 02 male ANT conn.) Outdoor Current Injector (01 female , 02 male ANT conn.) Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19) Indoor CIN cable (01: 7m, 05: 3m) Outdoor CIN Cable (04: 10.3m, 03: 3m) PDU Alarm Cable (15: 7m, 13: 3m) D100314, D100312 7060.00, 7060.05 7060.10, 7060.15 7070.10, 7070.30, 7070.50 PDU Power Cable (14: 7m, 12: 3m) CILOC (ANT) CILOC (BTS) MCU (10: AC, 30: 24V, 50: -48V)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
36
TT8D-0000112-0n1
TMA Twin 800 Digital Dividend 12 dB AISG 2.0 (Preliminary)
Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive sensitivity the uplink coverage and capacity is increased and mobile talk time extended. Powerwave Twin 800 Digital Dividend TMA offers state of the art performance, size and weight enclosure in Twin configuration, two TMAs in one housing with market leading reliability.
Features:
q
AISG compatible Current Alarm Mode (When no AISG is connected) Twin configuration, 2 TMAs in one and same housing Market leading reliability Low Noise Figure Low TX insertion loss Easy to install wall mount bracket and hose clams for pole mount included No Maintenance
ELECTRICAL SPECIFICATIONS
Uplink Frequency Range (MHz) Rejection Gain (dB) Return Loss Noise Figure UL Output 3rd Order Intercept Point (dBm) Bypass Loss (dB) Max Input Power (dBm) Downlink Frequency Range (MHz) Return Loss Insertion Loss (dB) Intermodulation Power Handling, RMS Power Supply & Alarm Input Voltage (V) Alarm Functionality Power Consumption AISG Compatibility AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received current alarm mode 170-190 mA <1.1 W per branch @ 12V AISG 2.0 791-821 >18 dB 0.4, Typical @ 2 x +43 dBm Tx carriers in receive band, <-115 dBm >55 dBm 832-862 >80 dB 12 >18 dB <1.4dB, Typical >+23 <1.6 Typical +14
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
37
TT8D-0000112-0n1
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch) Weight (lbs) Color RF Connectors Mounting Kit 273x170x120 mm <7kg (15.5 lbs) Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included
ENVIRONMENTAL
Temperature Range Operational Transport Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to + 149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours IP65 and IP68
MECHANICAL OUTLINE
INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two hose clamps are included in the TMA package. The TMA can be installed in all directions except flat with backside up 30. Ground the TMA and torque the jumper cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA Installation and Service Manual 044-05214.
ACCESSORIES
LGP21301, LGP21302 LGP23301, LGP23303 LGP12101, 02, 03, 04 D100301, LG705 D105104, D105103 D100315, D100313 Outdoor Current Injector (01 female , 02 male ANT conn.) Outdoor Current Injector (01 female , 02 male ANT conn.) Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19) Indoor CIN cable (01: 7m, 05: 3m) Outdoor CIN Cable (04: 10.3m, 03: 3m) PDU Alarm Cable (15: 7m, 13: 3m) D100314, D100312 7060.00, 7060.05 7060.10, 7060.15 7070.10, 7070.30, 7070.50 PDU Power Cable (14: 7m, 12: 3m) CILOC (ANT) CILOC (BTS) MCU (10: AC, 30: 24V, 50: -48V)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
38
POWERWAVE
24501, 24511
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL 1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall included 824-849 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 869-894 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @12 VDC, 1.5W per LNA >53.5 dBm 24501 AISG 1.1 (Field upgradable to AISG 2.0); 24511 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
39
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
010-11177-0214
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60950 ETS 125 113 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP 68 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included 1969.7-1984.7 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm) AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current: 250 mA Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
40
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
010-11182-02nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60950 ETS 125 113 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP68 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included 1920.5-1935.5 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm) AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current -0202: 250 mA Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
41
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
010-11183-02nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60950 ETS 125 113 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP68 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included 1964.9-1979.9 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm) AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current -0202: 250 mA; -0232: 180 mA Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
42
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
010-50025-0232
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60950 ETS 125 113 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP 68 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included 1950-1965 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current: 180 mA Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
43
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
25001, 25011
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included 890-915 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @12 VDC, 1.5W per LNA >53.5 dBm 25001 AISG1.1 (Field upgradable to AISG 2.0); 25011 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
44
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
25002, 25012
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL 1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall included 880-908 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0, Typical +10 dBm 925-953 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @ 12 VDC, 1.5W per LNA >53.5 dBm 25002 AISG 1.1 (Field upgradable to AISG 2.0); 25012 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
45
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
25014, 25016
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included 890-915 >82 dB 16 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode: 25014 170-190 mA; 25016 high CWA alarm current @12 VDC, 1.5W per LNA >53.5 dBm AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
46
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
25101, 25111
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x69 (9x6.7x2.7) <3 kg (<6.7 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included 890-915 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @12 VDC, 1.5W per LNA >53.5 dBm 25101 AISG1.1 (Field upgradable to AISG 2.0); 25111 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
47
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
25102, 25112
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL 1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x69 (9x6.7x2.7) <3 kg (<6.7 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall included 880-908 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0, Typical +10 dBm 925-953 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @ 12 VDC, 1.5W per LNA >53.5 dBm 25102 AISG 1.1 (Field upgradable to AISG 2.0); 25112 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
48
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
25103, 25113
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL1950, ETL ETS 300 342-3 -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68 228x169x69 (9x6.7x2.7) <3 kg (<6.7 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included 890-915 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with high CWA (Current Window Alarm) @12 VDC, 1.5W per LNA >53.5 dBm 25103 AISG1.1 (Field upgradable to AISG 2.0); 25113 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
49
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP192nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60 950 ETS 300 342-3 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP65 169 x 272 x 89 (7x11x4) <5.7 kg (12.3 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 880-915 >83 dB 12 >20 dB, Typical < 1.7 dB, Typical > +23 2.0, Typical +10 925-960 > 20 dB, Typical <0.7 dB, Typical @ 2 x 43 dBm Tx carrier (dBc), <-115 (<-158) 8-17 LGP19203 alarm current 170-190 mA; LGP19201 current alarm compatible with PDU LGP121nn @12 VDC, 1.5 W >52 dBm N/A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
50
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP174nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL60 950 FCC Part 15 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP65 181 x 365 x 66 (7x12x4) <7.9 kg (17.4 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 824-849 SMR Rejection, >30 dB @ 851 MHz 12 >21 dB, Typical < 1.7 dB, Typical > +23, Typical <2.2 +14 869-894 > 21 dB, Typical < 0.45 dB, Typical @ 2 x 43 dBm Tx carrier dBm (dBc), <-118 (<-161) 8-17 Two levels, individually supervised LNAs @12 VDC, 1.2 W >57 dBm N/A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
D031-08411 Rev. A with added Bypass Loss Aug 24 2010 Updated: Apr 18 2011 5:39PM
51
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP175nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL60 950 FCC Part 15 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP65 181 x 365 x 66 (7x12x4) 6.4 kg (14.1 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 1850-1910 @1912 MHz, >10 dB 12 >20 dB < 1.6 dB > +23 <2.6 dB +14 1930-1990 > 20 dB < 0.5 dB 2 Tx@43 dBm (dBc), <-158 8-17 Two levels, individually supervised LNAs @12 VDC, 1.2 W >54 dBm N/A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
52
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP18510, LGP18520
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60 950 ETS 301 489 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP 68 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 1710-1785 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1805-1880 > 18 dB 0.4 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 AISG compatible or in case of no AISG command received current alarm mode: 170-190 mA @12 VDC, 1.5 W per LNA >53 dBm LGP18510 AISG 1.1 (field upgrdable to AISG 2.0), LGP18520 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
53
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP18520, LGP18521
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60 950 ETS 301 489 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP 68 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 1710-1785 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1805-1880 > 18 dB 0.4 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 AISG compatible or in case of no AISG command received current alarm mode. Current alarm: LGP18520: Low CWA, LGP18521: High CWA @12 VDC, 1.5 W per LNA >53 dBm AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
54
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP185nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60 950 ETS 301 489 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP 68 (LGP18501, 06 upgraded from IP65 to IP68 week 36 2011) 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 1710-1785 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1805-1880 > 18 dB 0.4 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 LGP18506: 170-190 mA alarm current; LGP18501: current alarm compatible with PDU LGP121nn; LGP18507, 10, 17, 20, 21 AISG compatible or in case of no AISG command received current alarm mode: LGP18510, 20: 170-190 mA; LGP18507, 17: current alarm compatible with PDU LGP121nn @12 VDC, 1.5 W per LNA >53 dBm LGP18501, 06 no AISG; LGP18507, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18517, 20, 21 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
55
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP186nn
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL60 950, ETL FCC Part 15 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP 68 (LGP18601, 06 upgraded from IP65 to IP68 week 36 2011) 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 1850-1910 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1930-1990 > 18 dB 0.4 dB, Typical @ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc) AISG Mode: 10-30; Current alarm mode: 9 -17 LGP18606: 170-190 mA alarm current; LGP18601: current alarm compatible with PDU LGP121nn; LGP18607, 10, 17, 20 AISG compatible or in case of no AISG command received current alarm mode: LGP18610, 20: 170-190 mA; LGP18607, 17: current alarm compatible with PDU LGP121nn @12 VDC, 1.5 W per LNA >53 dBm LGP18601, 06 no AISG; LGP18607, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18617, 20 AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
56
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LGP18611
Twin Dual Duplex 1900 MHz Full Band (65 MHz BW)
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL60 950, ETL FCC Part 15 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP 68 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included 1850-1915 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical 3.0 dB, Typical +12 1930-1995 > 18 dB 0.5 dB, Typical @ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc) AISG Mode: 10-30; Current alarm mode: 9 -17 LGP18611: AISG compatible or in case of no AISG command received current alarm mode: 170-190 mA @12 VDC, 1.5 W per LNA >53 dBm AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
57
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TSAW-07BP111-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL 60950; UL 1950, TUV FCC part 15 -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours IP67 minimum 250x169x82 (9.9x6.7x3.1) <9 (<4 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included 1710-1770 with 698-746 bypass >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz 13 >18 dB <1.6 dB >+23 (Input IP3 >+11) <1.9 +14 dBm 2110-2170 with 698-746 bypass >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA <1.5 W 700: 500 W; AWS 300W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TSAW-07BP112001 has AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
58
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TTAW-07BP111-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL 60950; UL 1950, TUV FCC part 15 -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours IP67 minimum 250x169x139 (9.9x6.7x5.4) <18 (<8 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included 1710-1770 with 698-746 bypass >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz 13 >18 dB <1.6 dB >+23 (Input IP3 >+11) <1.9 +14 dBm 2110-2170 with 698-746 bypass >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA <1.5 W 700: 500 W; AWS 300W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW-07BP112001 has AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
59
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TTAW-0000112-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950 3GPP: TS 25.113 -40 C to +65 C (-40 F to + 149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours IP65 and IP68 192x154x50 mm (7.6x5.9x2.0) <2.5kg (5.5 lbs) Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included 1710-1755 >82 dB 12 >20 <1.4 dB >+23 <2.0, Typical +14 2110-2155 >20 <0.3 @ 2 x +43 dBm Tx carriers in receive band, <-160 dBc, reffered to antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 AISG compatible cor in case of no AISG command received current alarm mode 170-190 mA <1.1 W per branch @ 12V >49 dBm (4x43 dBm) AISG 2.0
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
60
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TTAW-60BW111-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL 60950; UL 1950, TUV FCC part 15 -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours per TMA IP67 minimum 192x154x50 mm (7.6x5.9x2.0) <7 (<3 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included 1710-1770 >80 dB 12 >18 dB <1.8 dB Max over temp; Average Weighted NF* @ +25C <1.3 dB (NF@low_bandedge+2xNF@midband+NF@high_bandedge)/4* >+22 (Input IP3 >+10) <2.6 +14 dBm 2110-2170 >18 dB <0.35 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA <2 W 300 W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW60BW112-001 has AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
61
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TS07-AWDB111-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL 60950; UL 1950, TUV FCC part 15 -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours per TMA IP67 minimum 305x305x127 (12x12x5) <27.6 (<12.5 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included 698-716 and 1710-1770 TX rejection >80 dB; 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz; AWS TMA: >25 dB rejection at 1700 and 1800 MHz 13 >18 dB AWS: < 1.6 dB, 700: <2.0 dB >+22 (Input IP3 >+10) AWS: <2.0, 700: < 2.9 +14 dBm 728-746 and 2110-2170 >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA <1.5 W (per LNA) 700: 500 W; AWS 300W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TS07AWDB112-001 has AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
62
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TS07-AWDB112-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC UL 60950; UL 1950, TUV FCC part 15 -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours per TMA IP67 minimum 305x305x130 (12x12x5.2) <30 (<13.6 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included 698-716 and 1710-1770 >80 dB TX rejection, 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz (Roll off beginns at 699.25 and 714.75), AWS TMA: >25 dB at 1700 and 1800 MHz 13 >18 dB AWS: < 1.6 dB, 700: <2.0 dB >+22 (Input IP3 >+10) AWS: <2.0, 700: < 2.9 +14 dBm 728-746 and 2110-2170 >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA <1.5 W (per LNA) 700: 500 W; AWS 300W AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
63
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TT08-19DB111-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN 60950 3GPP: TS 25.113 -40 C to +65 C (-40 F to + 149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours (per TMA) IP65 and IP68 360x169x137mm (14.2x6.7x5.4) <22 Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included 824-849 / 1850-1910 SMR Rejection, >30 dB @ 851 MHz 12 >18 dB <1.7 dB, Typical +25, Typical 2.5, Typical +14 dBm 869-894 / 1930-1990 > 18 dB 850 MHz, 0.4; 1900 MHz, 0.5 @ 2 x +43 dBm Tx carriers, in receive band, <-160 dBc, referred to antenna port AISG Mode: 10-30; Current alarm mode: 8 -17 AISG compatibe or in case of no AISG command received current alarm mode 270-290 mA < 1.8 W per branch @ 12V 850: >57 dBm; 1900: >55 dBm AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT08-19DB112001 has AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
64
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TT19-08BP111-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950 3GPP: TS 25.113 -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours per TMA IP65 and IP68 250x169x137 mm (9.9x6.7x5.4) <16 Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included 1850-1910 with 824-894 bypass >77 dB 12 >18 <1.7 dB, Typical >+23 2.5, Typical +14 dBm 1930-1990 with 824-894 bypass >18 850 MHz, <0.3; 1900 MHz, <0.5 @ 2 x +43 dBm TX carriers, in receive band, <160 dBc, reffered to antenna port AISG Mode: 10-30; Current alarm mode: 8 -17 AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA <1.1W @12V 850: >57 dBm; 1900: >55 dBm AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT19-08BP112001 has AISG 2.0 loaded from factory
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
65
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TU09-000001n-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL1950, ETL ETS 300 342-3 Aluminum >1 million hours per TMA IP68 -40C to +65C (-40F to +149F) 230.5x171x160 (9.1x6.8x6.3) <7 kg (15.4 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included 935-960 >18 dB 0.4 <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @12 VDC, 1.5W per LNA >53.5 dBm TU09-0000011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU09-0000012-001 AISG 2.0 890-915 >82 dB Variable 0-12 in 1 dB steps >18 dB 1.5dB, typical at 12 dB gain +25, typical <5.5 (Including 3 dB hybrid loss)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
66
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TU9E-28BW01n-001
ELECTRICAL SPECIFICATIONS* UL Frequency Range (MHz) UL Rejection UL Gain (dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point (dBm) UL Bypass Loss (dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality Power Consumption Power Handling, RMS AISG Compatibility MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Colors RF Connectors Mounting Kit ENVIRONMENTAL SPECIFICATIONS* Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection APPROVALS AND TESTS* Safety EMC EN60950, UL1950, ETL ETS 300 342-3 Aluminum >1 million hours per TMA IP68 -40C to +65C (-40F to +149F) 230.5x171x160 (9.1x6.8x6.3) <7 kg (15.4 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included 925-953 >18 dB 0.65 maximum <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current @12 VDC, 1.5W per LNA >53.5 dBm TU9E-28BW011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU9E-28BW012-001 AISG 2.0 880-908 >82 dB Variable 0-12 in 1 dB steps >18 dB 1.5dB, typical at 12 dB gain +25, typical <5.5 (Including 3 dB hybrid loss)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
67
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TMA Products
Power Distribution Units
Title PDU Lite Indoor PDU Lite Indoor (For Dual Band TMAs) PDU Lite Indoor
Page 69
N/A
N/A
LGP18104
70
N/A
N/A
LGP12101
71
68
POWERWAVE
TMA Products
LGP121nn
ELECTRICAL DATA Input Voltage Input Current (Max) Input Protection and Polarity Output Voltage Output Current (Max) Output Protection Sum Alarm Output Port MECHANICAL SPECIFICATIONS Dimensions, HxWxD, mm(ft) Weight (lbs) 3.9 x 0.8 x 2.4 in 120 g (0.3 lbs.) 20 to 60 V DC, positive or negative 1A Automatic Polarity Agile 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Relay Normally Open and Normally Closed
ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity MTBF APPROVALS AND TESTS EMC Environmental ETS 300 342-3 ETS 300 019 -33 C to +60 C (-27 F to +140 F) 5-95% RH non condensing >1 million hours
69
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TMA Products
LGP18104
ELECTRICAL DATA Input Voltage Input Current (Max) Input Protection and Polarity Output Voltage Output Current (Max) Output Protection Sum Alarm Output Port MECHANICAL SPECIFICATIONS Dimensions, HxWxD, mm(ft) Weight (lbs) 19 1HU (19 x 1.75) 700 (1.55) 20-60 V DC, positive or negative 3x1 A Automatic Polarity Agile 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Relay Normally Open and Normally Closed
ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity MTBF APPROVALS AND TESTS EMC Environmental ETS 300 342-3 ETS 300 019 -33 to +60 (-27 to +140) 5-95% RH non condensing >1 000 000 hours (over 100 years)
70
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
TMA Products
LGP12101
ELECTRICAL DATA Input Voltage Input Current (Max) Input Protection and Polarity Output Voltage Output Current (Max) Output Protection Sum Alarm Output Port MECHANICAL SPECIFICATIONS Dimensions, HxWxD, mm(ft) Weight (lbs) 3.9 x 0.8 x 2.4 in 120 g (0.3 lbs.) 20 to 60 V DC, positive or negative 1A Automatic Polarity Agile 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Relay Normally Open and Normally Closed
ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity MTBF APPROVALS AND TESTS EMC Environmental ETS 300 342-3 ETS 300 019 -33 C to +60 C (-27 F to +140 F) 5-95% RH non condensing >1 million hours
71
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Current Injectors
TMA Products
Current Injectors
Page 73
>20
<0.1
LGP233nn
74
806-960 or 1710-1990
>25
<0.1
LGP138nn
75
>20
<0.1
LGP23302
76
72
POWERWAVE
Current Injectors
LGP213nn
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 698 - 960 and 1710 - 2690 (Frequency extended: LGP21301 from Rev L, LGP21302 from Rev K, Sep 1 2010) >20 < 0.1 1.5 A <-116 dBm (<-159 dBc)
MECHANICAL SPECIFICATIONS* Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 87 x 41 x 51 (3.4 x 1.6 x 2.0) 0.32 (0.71) Off-white, NCS 1502R Aluminum DIN 7/16 female and male LGP21301 ANT female, BTS male LGP21302 ANT male, BTS female SMA female
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Evironmental Lightning Protection -40 to +65 (-40 to +149) >1 000 000 hours EN 609 50, UL 60950, ETL IP 68 - EN 60 529 ETS 300 019 IEC 61312-1
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
73
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Current Injectors
LGP233nn
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010) >20 <0.1 1.5 A <-116 dBm (<-159 dBc)
MECHANICAL SPECIFICATIONS* Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 87 x 41 x 51 (3.4 x 1.6 x 2.0) 0.32 (0.71) Silver plating Zink Alloy DIN 7/16 female and male LGP23301 ANT female, BTS male LGP23302 ANT male, BTS female SMB male
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Evironmental Lightning Protection -5 to +55 (23 to +131) >1 000 000 hours (over 100 years) EN 609 50, UL 609 50, ETL IP 54 - EN 605 29 ETS 300 019 IEC 61312-1
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
74
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Current Injectors
LGP138nn
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 806 - 960MHz or 1710 - 1990 >25 < 0.1 1A <-110 dBm, (<-153)
MECHANICAL SPECIFICATIONS* Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 107 x 48 x 62 (4.2 x 1.9 x 2.4) 0.45 (<1) Off-white, NCS 1502R Aluminum DIN 7/16 or type N female and male Screw Terminal Block
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Evironmental Lightning Protection -40 to +65 (-40 to +149) >1 000 000 hours EN 609 50, UL 60950, ETL IP 65 - EN 60 529 ETS 300 019 IEC 1312-1
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
75
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Current Injectors
LGP23302
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010) >20 <0.1 1.5 A <-116 dBm (<-159 dBc)
MECHANICAL SPECIFICATIONS* Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 87 x 41 x 51 (3.4 x 1.6 x 2.0) 0.32 (0.71) Silver plating Zink Alloy DIN 7/16 female and male; LGP23302 ANT male, BTS female SMB male
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Evironmental Lightning Protection -5 to +55 (23 to +131) >1 000 000 hours (over 100 years) EN 609 50, UL 609 50, ETL IP 54 - EN 605 29 ETS 300 019 IEC 61312-1
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
76
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Filter Products
Power wave
Base station co-siting and new technology overlays are growing trends around the globe and Powerwave is leading the way with a range of same band, dual band and triple band solutions. There are many reasons for adopting co-siting filter solutions, including limited tower space, zoning regulations and public opinion against new site locations. In addition, as newer technology platforms such as UMTS or LTE are deployed the need for straightforward, low loss, high performance feedline consolidation solutions are required to allow operators to maximize existing network CAPEX by reusing installed cable and antenna structures.
Diplexer/Crossband Combiner Duplexers Same Band Combiner T1 Triplexer/Crossband Combiners Interference Filters
POWERWAVE
Filters
Page 79
698-2170
20 dB minimum
81
790+862
20 dB
83
817-869
14 dB minimum
85
824-894
4.2 dB maximum
18 dB minimum
86
880-960
4.5 dB maximum 0.3 dB maximum (Rx) 0.6 dB maximum (Tx) 0.6 dB maximum (Rx)
18 dB minimum
87
1710-2170
18 dB minimum
88
1850-1990
18 dB minimum
LGP146nn
89
880-2170
0.2 dB maximum -01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz) <0.1 dB Typical
20 dB minimum
LGP141nn
90
890-960
>18 dB
LGP195nn
91
824-2170
20 dB minimum
LGP219nn
92
78
CM1002-DBPXBC
Diplex Filter for LTE700 and 800 MHz with DC Auto Sense
Filters
Introduction:
The CM1002-DBPXBC is a high performance 698-793 MHz + 824-894 MHz Crossband Combiner Diplexer intended for North America LTE700 + 850 applications. Low loss, high isolation, high power handling, low IMD and options for either DC-Auto Sense or Hard-Wired DC/AISG feedthrough, RF Sniffer Port and integrated CILOC are all available.
Features:
q
60 dB Isolation, 0.30 dB maximum Insertion Loss Power Handling 500 watts/5 kW PEP minimum per Channel Low IMD -117 dBm (-160 dBc) maximum DC-Auto Sense DC/AISG Feedthrough Option Common Sniffer Port and Integrated CILOC Options Hard Wired DC/AISG Feedthrough Options
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Insertion Loss Return Loss Rejection Isolation (Channel to Channel) Average Power Handling (RMS) Peak Power (dBm) Intermodulation Products (dBc) DC Feedthrough Capacity DC AISG Feedthru -001 (Single)/ -008 (Twin) DC AISG Feedthru -002 (Single)/ -009 (Twin) DC AISG Feedthru -003 (Single)/ -010 (Twin) DC AISG Feedthru -004 (Single)/ -011 (Twin) DC AISG Feedthru -005 (Single)/ -012 (Twin) DC AISG Feedthru -006 (Single)/ -013 (Twin) DC AISG Feedthru -007 (Single)/ -014 (Twin) Low Port, 698-793 MHz 0.30dB(0.15dBtypical) 20dB 60dB@824-894 MHz 60dB 500 watts (+57 dBm) max. (per channel) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch (per channel TMA Supply Voltage, Fed Via RF Cable, +31VDC, 2A maximum DC/AISG Auto-Sense from low or high channels (see logic table) Option -001 + Sniffer Port -43 to -30 dB (698-793 and 824-894 MHz) Option -002 + AISG Connector (internal CILOC compatible to AISG 1.1 & 2.0) All ports are DC/AISG isolated no feedthru (no DC Auto-Sense function) All ports are DC/AISG hard-wired connected to common port (no DC Auto-Sense) Low frequency channel is hard-wired connected to common port (no DC Auto-Sense) High frequency channel is hard-wired connected to common port (no DC Auto-Sense) High Port, 824-894 MHz 0.30dB(0.15dBtypical) 20dB 60dB@698-793 MHz
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
79
CM1002-DBPXBC
MECHANICAL SPECIFICATIONS
RF Connectors RF Sniffer Connector AISG Connector Dimensions, HxwxD, mm(in) DIN 7/16 female, long neck N female (IP67 cap included) Per IEC-60130-9 (IP67 cap included) Single: 240mm x 210mm x 83mm (9.4 x 8.3 x 3.3); Twin: 240mm x 210mm x 153mm (9.4 x 8.3 x 6) Single: 4.6 (10.1); Twin: 8.3 (18.3) Aluminum/Off-White (NCS 1502-R) Hose Clamps in Stainless Steel
CM1002-DBPXBC004/-011 No Connection No Connection N/A DC/AISG Function Table by Model CM1002-DBPXBC001/-008
Filters
DC/AISG FEEDTHROUGH/APPLICATION TABLE
DC Auto Sense Logic Table
Low Port (698-793 MHz) #1 Priority Connection High Port (824-894 AISG Port DC/AISG MHz) Connection #2 Priority Connection N/A DC AutoSense& Tower Top Capable Yes Common to Low Port Only Yes Common to Low Port Only No - BTS location only Yes
CM1002-DBPXBC002/-009
#1 Priority Connection
#2 Priority Connection
N/A
DC AutoSense&
CM1002-DBPXBC003/-010
#2 Priority Connection
#3 Priority Connection
Hard-Wired
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (F) Lightning Protection Ingress Protection Environmental EMC Safety -40to +65(-40to +149) According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield IP65/IP67 (IP rated cap must be used on any unused ports) ETS 300 019 ETS 300 342-3 EN60950, UL 1950, ET
Connection
Connection
N/A
Hard-Wired
Yes
Connection
No Connection
N/A
Hard-Wired
Yes
No Connection
Connection
N/A
Hard-Wired
Yes
NOTES
Installations must be grounded according to local and national codes. Do not install or work on diplexers/filters near power lines. Install or work on diplexers/filters or similar structures out of falling distance of all such lines. Every electrical and telephone wire is potential dangerous. RF-connectors torque recommendations must be followed. AISG connectors must be hand tightened. Do not use tools.
RESPONSE PLOTS
LowChannelS21Response
S21IsolationResponse
CommonPortS22ReturnLoss
HighChannelS21Response
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
80
CM1007-DBPXBC-xxx
Diplex Filter for LTE700/800 MHz and AWS/PCS with DC Auto Sense
Filters
Introduction:
The CM1007-DBPXBC is a high performance 698-894 MHz + 1710-2170 MHz Crossband Combiner Diplexer intended for North America LTE700/850 + AWS/PCS, and Global LTE800 + DCS/UMTS applications. Low loss, high isolation, high power handling and options or either DC-Auto Sense or HardWired DC/AISG feedthrough, RF Sniffer Port and integrated CILOC are all available
Features:
q
60 dB Isolation, 0.15 dB maximum Insertion Loss Power Handling 500 watts/5 kW PEP minimum per Channel Low IMD -115 dBm (-158 dBc) maximum DC-Auto Sense DC/AISG Feedthrough Option Common Sniffer Port and Integrated CILOC Options Hard Wired DC/AISG Feedthrough Options
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Insertion Loss Return Loss Rejection Isolation (Channel to Channel) Average Power Handling (RMS) Peak Power (dBm) Intermodulation Products (dBc) DC Feedthrough Capacity DC Bias/AISG Auto-Sense (-001 Option) Antenna Sniffer Port (-002 Option) AISG Port & Integrated CILOC (-003 Option) DC/AISG Feedthru Delete (-004 Option) DC/AISG Common All Ports (-005 Option) DC/AISG Low to Common Port (-006 Option) DC/AISG High to Common Port (-007 Option) Low Port, 698-894 MHz 0.15dB(0.08dBtypical) 20dB 60dB@1710-2170 MHz 60dB 500 watts (+57 dBm) max. (per channel) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch (per channel) TMA Supply Voltage Fed Via RF Cable, +32V @ 2A max. DC/AISG Auto-Sense from low or high channels (see logic table below) Option -001 + Sniffer Port -43 to -30 dB (698-894 and 1710- 2170 MHz) Options -001 & -002 + AISG Connector (Internal Converter AISG 1.1/2.0 Compatible) All ports are DC and AISG isolated from each other (no Auto-Sense function) All ports are permanently connected for DC and AISG connectivity (no Auto-Sense function) Low frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function) High frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function) High Port, 1710-2170 MHz 0.15dB(0.08dBtypical) 20dB 60dB@698-894 MHz
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
81
CM1007-DBPXBC-xxx
MECHANICAL SPECIFICATIONS
RF Connectors RF Sniffer Connector AISG Connector Dimensions, HxwxD, mm(in) Weight, with brackets, kg(lbs) Housing Composition/Color Mounting Kit DIN 7/16 female, long neck N female (IP67 cap included)
DC/AISG Feedthru
Filters
DC/AISG FEEDTHROUGH/APPLICATION TABLE
DC Auto Sense Logic Table
Low Port High Port AISG Port DC/AISG (698-894 MHz) (1710-2170 MHz) Connection #2 Priority Connection #2 Priority Connection #3 Priority Connection #1 Priority Connection #1 Priority Connection #2 Priority Connection N/A Tower Top Capable
Per IEC-60130-9 (IP67 cap included) 125 x 227.5 x 83 (4.92 x 8.96 x 3.27), excluding connectors and bracket 3.0 (6.5) Aluminum/Off-White (NCS 1502-R) Hose Clamps in Stainless Steel
CM1007-DBPXBC-003 CM1007-DBPXBC-001
DC Auto- Yes - Common to Sense& High Port Only DC Auto- Yes - Common to Sense& High Port Only
CM1007-DBPXBC-002
N/A
#1 Priority DC Auto- No - BTS location Connection Sense& only N/A N/A N/A N/A Hard-Wired Hard-Wired Hard-Wired Hard-Wired Yes Yes Yes Yes
CM1007-DBPXBC-004 CM1007-DBPXBC-005
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (F) Lightning Protection Ingress Protection Environmental EMC Safety -40to +65(-40to +149) IEC 61312-1, 3 kA 10/350 s, 8 kA 8/20 s IP67 (IP67 rated cap must be used on any unused ports) ETS 300 019 ETS 300 342-3 EN60950, UL 1950, ET
CM1007-DBPXBC-006 CM1007-DBPXBC-007
NOTES
Installations must be grounded according to local and national codes. Do not install or work on diplexers/filters near power lines. Install or work on diplexers/filters or similar structures out of falling distance of all such lines. Every electrical and telephone wire is potential dangerous. RF-connectors torque recommendations must be followed. AISG connectors must be hand tightened. Do not use tools.
RESPONSE PLOTS
LowChannelS21Response
HighChannelS21Response
S21IsolationResponse(inhigh band)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
82
CM1015-DBPXBC-xxx
Diplex Filter for LTE800 and GSM900 with DC Auto Sense
Filters
Introduction:
The CM1015-DBPXBC is a high performance 790-862 MHz + 880-960 MHz Crossband Combiner Diplexer intended for European LTE800 + E-GSM900 applications. Low loss, high isolation, high power handling, low IMD and options for either DC-Auto Sense or Hard-Wired DC/AISG feedthrough, RF Sniffer Port and integrated CILOC are all available.
Features:
q
50 dB Isolation, 0.35 dB maximum Insertion Loss Power Handling 300 watts/3 kW PEP minimum per Channel Low IMD -117 dBm (-160 dBc) maximum DC-Auto Sense DC/AISG Feedthrough Option Common Sniffer Port and Integrated CILOC Options Hard Wired DC/AISG Feedthrough Options
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Insertion Loss Return Loss Rejection Isolation (Channel to Channel) Average Power Handling (RMS) Peak Power (dBm) Intermodulation Products (dBc) DC Feedthrough Capacity DC AISG Feedthru -001 (Single)/ -008 (Twin) DC AISG Feedthru -002 (Single)/ -009 (Twin) DC AISG Feedthru -003 (Single)/ -010 (Twin) DC AISG Feedthru -004 (Single)/ -011 (Twin) DC AISG Feedthru -005 (Single)/ -012 (Twin) DC AISG Feedthru -006 (Single)/ -013 (Twin) DC AISG Feedthru -007 (Single)/ -014 (Twin) Low Port, 790-862MHz 0.35dB(0.15dBtypical) 20dB 50dB@880-960 MHz 50dB 300 watts (+54) max. 3 kW (+64 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch -117 dBm (-160) in Rx band, two/+43 dBm carriers in the Tx band TMA Supply Voltage Fed Via RF Cable, +32V @ 2A max. DC/AISG Auto-Sense from low or high channels (see logic table) Option -001 + Sniffer Port -43 to -30 dB (790-862 and 880-960 MHz) Option -002 + AISG Connector (internal CILOC compatible to AISG 1.1 & 2.0) All ports are DC/AISG isolated no feedthru (no DC Auto-Sense function) All ports are DC/AISG hard-wired connected to common port (no DC Auto-Sense) Low frequency channel is hard-wired connected to common port (no DC Auto-Sense) High frequency channel is hard-wired connected to common port (no DC Auto-Sense) High Port, 880-960 MHz 0.35dB(0.15dBtypical) 20dB 50dB@790-862 MHz
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
83
CM1015-DBPXBC-xxx
MECHANICAL SPECIFICATIONS
RF Connectors RF Sniffer Connector AISG Connector Dimensions, HxwxD, mm(in) DIN 7/16 female, long neck N female (IP67 cap included) Per IEC-60130-9 (IP67 cap included) Single: 240mm x 210mm x 83mm (9.4 x 8.3 x 3.3); Twin: 240mm x 210mm x 153mm (9.4 x 8.3 x 6) Single: 4.6 (10.1); Twin: 8.3 (18.3) Aluminum/Off-White (NCS 1502-R) Hose Clamps in Stainless Steel
CM1015-DBPXBCxxx-004/-011 No Connection No Connection N/A DC/AISG Function Table by Model CM1015-DBPXBCxxx-001/-008
Filters
DC/AISG FEEDTHROUGH/APPLICATION TABLE
DC Auto Sense Logic Table
Low Port (790-862 MHz) #1 Priority Connection High Port (880-960 AISG Port DC/AISG MHz) Connection #2 Priority Connection N/A DC AutoSense& Tower Top Capable Yes Common to Low Port Only Yes Common to Low Port Only No - BTS location only Yes
CM1015-DBPXBCxxx-002/-009
#1 Priority Connection
#2 Priority Connection
N/A
DC AutoSense&
CM1015-DBPXBCxxx-003/-010
#2 Priority Connection
#3 Priority Connection
Hard-Wired
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (F) Lightning Protection Ingress Protection Environmental EMC Safety -40to +65(-40to +149) According to IEC 61312-1, 8 kA 8/20 uS;center pin (any port)-shield IP65/IP67 (IP rated cap must be used on any unused ports) ETS 300 019 ETS 300 342-3 EN60950, UL 1950, ET
Connection
Connection
N/A
Hard-Wired
Yes
Connection
No Connection
N/A
Hard-Wired
Yes
No Connection
Connection
N/A
Hard-Wired
Yes
NOTES
Installations must be grounded according to local and national codes. Do not install or work on diplexers/filters near power lines. Install or work on diplexers/filters or similar structures out of falling distance of all such lines. Every electrical and telephone wire is potential dangerous. RF-connectors torque recommendations must be followed. AISG connectors must be hand tightened. Do not use tools.
RESPONSE PLOTS
LowChannelS21Response
S21IsolationResponse
CommonPortS22ReturnLoss
HighChannelS21Response
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
84
POWERWAVE
Filters
010-11198-0002
ELECTRICAL SPECIFICATIONS* Filter Type Frequency Range Antenna to Receive (RX) Port: Passband Passband Insertion Loss Passband Loss Flatness Passband Return Loss Rejection DC - 650 MHz 650 - 680 MHz 680 - 750 MHz 780 - 790 MHz 862 - 869 MHz 869 - 2700 MHz Transmit (Tx) to Antenna Port: Passband Passband Insertion Loss Passband Loss Flatness Passband Return Loss Rejection: DC - 806 MHz 806 - 824 MHz 824 - 861.35 MHz &861.50 MHz &861.65 MHz 920 - 2700 Input Power Handling: Average Peak Instantaneous MECHANICAL SPECIFICATIONS Dimensions mm(in) Weight lb(kg) CONNECTORS Antenna Transmit Receive Grounding Stud ENVIRONMENTAL SPECIFICATIONS Operating Temperature Range (Celsius) Operating Humidity Operating Altitude 0 C to +50 C 10-100%, non-condensing Sea Level to 7500 feet (or equal barometric pressure) N-F N-F SMA-F Stainless M10x1.5 and hex nut for complete performance data 389.2 x 212 x 135 max (not inc. connectors or mtg brackets) 25.4 (11.52) maximum 100 watts minimum 11,000 watts minimum 80 dB minimum 70 dB minimum 50 dB minimum 30 dB minimum 10 dB minimum 40 dB minimum 862-869 1.6 dB maximum +/- 0.5 dB 14 dB minimum 70 dB minimum 85 dB minimum 70 dB minimum 40 dB minimum 80 dB minimum 40 dB minimum 817-824 1.0 dB maximum +/- 0.5 dB 14 dB minimum 850 MHz Rebanding Duplexer 817-869
85
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
CM1000-AMPS-xxx
TECHNICAL SPECIFICATIONS* Filter Type Range (MHz) Frequency Range (Full Band MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power Handling (dBm) Intermodulation (IM) (dBc) (Products Max) Isolation Between Ports Common Port AISG Mode AISG Control Signal Loss Voltage Drop with 15W Power Supply Voltage Handling Continuous Current Handling DC Load MECHANICAL SPECIFICATIONS* Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit - Rack Mount Mounting Kit - Tower Mounting ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit)
MTBF Surge Protection Safety Ingress Protection Evironmental EMC
850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1 824-894 Uplink, 824-849 4.2 dB maximum 18 dB minimum N/A N/A Downlink, 869-894 0.6 dB maximum 18 dB minimum 200 watts (+53.0) 1200 watts (+60.8) PEP maximum at 3000m, +65C and 2:1 antenna mismatch
-115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1 Per AISG 1.1, 2.0 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz 1 V maximum @ 10-30VDC 0-35VDC 5 A, 0-35VDC 100 mA, +/-20 mA at GSM BTS Ports
437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors 8.15 (18) Off White (NCS 1502-R) Aluminum, IP 67 DIN 7/16 female 19 Rack Mount Brackets (order P/N CM1000-AMPS-001) Hose Clamps in Stainless Steel (order P/N CM1000-AMPS-002)
The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.
86 86
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
CM1001-EGSM-xxx
TECHNICAL SPECIFICATIONS* Filter Type Range (MHz) Frequency Range (Full Band MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power Handling (dBm) Intermodulation (IM) (dBc) (Products Max) Isolation Between Ports Common Port AISG Mode AISG Control Signal Loss Voltage Drop with 15W Power Supply Voltage Handling Continuous Current Handling DC Load MECHANICAL SPECIFICATIONS* Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit - Rack Mount Mounting Kit - Tower Mounting ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Surge Protection Safety Ingress Protection Evironmental EMC -40 C to +65 C (-40 to +149) 1 Million Hours IEC 61312-1 EN 60950, UL 60950 IP67 ETS 300 019 3GPP: TS 25.113 437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors 8.15 (18) Off White (NCS 1502-R) Aluminum, IP 67 DIN 7/16 female 19 Rack Mount Brackets (order P/N CM1001-EGSM-001) Hose Clamps in Stainless Steel (order P/N CM1001-EGSM-002) Uplink, 880-915 4.5 dB maximum 18 dB minimum N/A N/A GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1 880-960 Downlink, 925-960 0.6 dB maximum 18 dB minimum 200 watts (+53.0) 1200 watts (+60.8) PEP maximum at 3000m, +65C and 2:1 antenna mismatch
-115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1 Per AISG 1.1, 2.0 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz 1 V maximum @ 10-30VDC 0-35VDC 5 A, 0-35VDC 100 mA, +/-20 mA at GSM BTS Ports
The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.
87
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP145nn
TECHNICAL SPECIFICATIONS Filter Type Range (MHz) Frequency Range (Full Band MHz) Frequency Range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM)(dBc)(Products, Max) Common+Port DC Bias/AISG Passthru (single): 1800 Port, 1710-1880 0.3 dB maximum (Rx), 0.6 dB maximum (Tx) 18 dB minimum 74 dB min. 1920-1980 MHz & 59 dB min. 2110-2170 MHz 240 watts (+53.8) minimum 1440 watts (+61) minimum Diplexer for 1800/2100 1710-2170 1710-1880 MHz/1920-2170 UMTS Port, 1920-2170 0.5 dB maximum (Rx), 0.3 dB maximum (Tx) 18 dB minimum 60 dB min. 1710-1880 MHz 80 watts (+49) minimum 1600 watts (+62) minimum
-118 dBm (-161) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +/-58.5 V maximum, 2 A -01: DC/AISG to issue 2.0 -02: DC/AISG to issue 2.0 (UMTS Port to Antenna Port) (1800 Port to Antenna Port) -03: DC/AISG to issue 2.0 (connected all ports) -04: No Connection (DC Grounded)
MECHANICAL SPECIFICATIONS* Dimensions mm(in) Weight kg(lbs) Volume Color Housing RF Connectors Mounting Kit 180 x 162 x 61 (7x 6x 2) 3.6 (7.9) N/A Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 10 Million Hours 3 kA 10/350 us; center pin (any port) to shield and 50 kA 10/350 us; shield-shield (Pulse forms per IEC61312-1) EN60 950 IP65, EN 60 529 ETS 300 019 N/A
88
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP146nn
TECHNICAL SPECIFICATIONS Filter Type Range (MHz) Frequency Range (Full Band MHz) Frequency Range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM)(dBc)(Products, Max) Common+Port DC Bias/AISG Passthru (single): RECEIVE,1850-1910 0.6 dB maximum (Rx) 18 dB minimum 40 dB minimum; 1930-1990 MHz N/A N/A Duplex Filter 1900 1850-1990 1850-1910 MHz/1930-1990 MHz TRANSMIT, 1930-1990 0.5 dB maximum (Tx) 18 dB minumum 40 dB minimum; 1850-1910 MHz 200 watts (+53) minimum TRANSMIT, 1000W (+60 dBm) minimum
-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +31 V maximum, 1.1 A -01: DC/AISG to issue 2.0 (Rx Port to Antenna Port) N/A N/A N/A
MECHANICAL SPECIFICATIONS* Dimensions mm(in) Weight kg(lbs) Volume Color Housing RF Connectors Mounting Kit 163 x 181 x 65 (6x 7x 3) 3.3 (7.3) maximum N/A Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 10 Million Hours IEC 61312-1 EN 60 950, UL 1950 IP65, EN 60 529 ETS 300 019 N/A
89
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP141nn
Triplex Filter for 900, 1800 MHz and UMTS with DC Transparency
TECHNICAL SPECIFICATIONS Range (MHz) Frequency Range (Full Band MHz) Peak Power (dBm) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Intermodulation (IM) (dBc) (Products, Max) 900 Port, 880-960 1600 W (+62) PEP 880-2170 1800 Port, 1710-1880 1600 W (+62) PEP UMTS Port, 1920-2170 1600 W (+62) PEP 0.1 dB typical (0.5 dB max. Rx, 0.3 dB max. Tx) 20 dB minimum 350 W (+55) max.
0.1 dB typical (0.2 dB max.) 0.1 dB typical (0.3 dB max. Rx, 0.6 dB max. Tx) 20 dB minimum 350 W (+55) max. 20 dB minimum 350 W (+55) max.
3rd Order: -100 dBm; 5th 3rd Order: -100 dBm; 5th -116 dBm (Rx band products w/2x43 dBm in Tx band) Order: -116 dBm (Rx band Order: -116 dBm (Rx band products w/2x43 dBm in Tx products w/2x43 dBm in Tx band) band) Rejection Between Ports (except common), >50 dB N/A TMA supply voltage, fed via the RF cable, +/-32 V maximum, 2 A -06: No Connection (DC Grounded) -07: DC/AISG to issue 2.0 (connected all ports) -08: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports) -09: DC/AISG to issue 2.0 (connected to UMTS port) -10: DC/AISG to issue 2.0 (connected to 900 & UMTS ports) -11: No Connection (DC Grounded) -12: DC/AISG to issue 2.0 (connected all ports) -13: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports) -14: DC/AISG to issue 2.0 (connected to UMTS port) -15: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)
Isolation Between Ports Coupled Ports Common+Port DC Bias/AISG Passthru -06 (single) DC Bias/AISG Passthru -07 (single) DC Bias/AISG Passthru -08 (single) DC Bias/AISG Passthru -09 (single) DC Bias/AISG Passthru -10 (single) DC Bias/AISG Passthru -11 (twin) DC Bias/AISG Passthru -12 (twin) DC Bias/AISG Passthru -13 (twin) DC Bias/AISG Passthru -14 (twin) DC Bias/AISG Passthru -15 (twin) MECHANICAL SPECIFICATIONS Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Coupled Port Connector AISG Connector Mounting Kit ENVIRONMENTAL SPECIFICATIONS Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Environmental
169 x 228 x 69.7 (6.65x 8.98x 2.75) <3.0 (6.5) Off White (NCS 1502-R) Aluminum, IP 65 (Optional IP 68) DIN 7/16 female N/A N/A Hose Clamps in Stainless Steel
-40 C to +65 C (-40 to +149) 4 Million Hours EN 60 950, UL 60 950, ETL IP65, EN 60 529 ETS 300 019
90
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP195nn
TECHNICAL SPECIFICATIONS* Filter Type Frequency Range (MHz) Rx Passband Frequency Range (MHz) Tx Passband Frequency Range (MHz) Rx Passband Insertion Loss Tx Passband Insertion Loss Passband Return Loss Rejection Passband Power Handling (dBm) Passband Peak Power Handling Intermodulation IM dBc Products Max -01: > 30 dB 869 to 889 MHz -01: 890-915 MHz -01: 935-960 MHz Co-Location Filter GSM900 890-960 -02: 890-915 MHz -02: 935-960 MHz < 0.5 dB Uplink:17dBDownlink:18dB -02: > 37 dB 869 to 888 MHz -03: > 30 dB 869 to 895 MHz 200 watts (+53) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03) 1585 watts (+62) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03) -110 dBm (-153 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band -03: 896-915 MHz -03: 941-960 MHz
-01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)
MECHANICAL SPECIFICATIONS* Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit 169 x 228 x 68 (7x 9x 2) 3.8 (8.4) maximum Off White (NCS 1502-R) Aluminum, Powder Coated DIN 7/16 female Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) Operating Humidity Range MTBF Ingress Protection -5 to +55 (23 to +131 ) 0 to +95% Relative Humidity >10 Million Hours IP65
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
91
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP219nn
Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with Configurable DC Transparency
TECHNICAL SPECIFICATIONS Filter Type Range (MHz) Frequency Range (Full Band MHz) Frequency Range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM)(dBc)(Products, Max) Common+Port DC Bias/AISG Passthru (single): -01: No Connection (DC Grounded) -05: No Connection (DC Grounded) 824-960 Port, 824-960 MHz <0.1 dB Typical 20 dB minimum 50 dB minimum; 1710-2170 MHz 850 MHz: 500 watts (+57); 900 MHz: 350 watts (+55) max. 850 MHz: 5 kW (+67) PEP; GSM: 2.8kW (+64.5) PEP Diplex Filter for 800/900 MHz and 1800/1900/2100 824-2170 824-960 MHz/1710-2170 MHz 1710-2100 Port, 1710-2170 MHz <0.2 dB Typical 20 dB minimum 50 dB minimum; 824-960 MHz 350 watts (+55) max. DCS/UMTS: 2.8 kW (+64.5) PEP; PCS: 5 kW (+67) PEP
-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +/-31 V maximum, 2 A -02: DC/AISG to issue 2.0 (connected all ports) -06: DC/AISG to issue 2.0 (connected all ports) -03: DC/AISG to issue 2.0 (1710-2100 Port to Antenna Port) -07: DC/AISG to issue 2.0 (1710-2100 Port to Antenna Port) -04: DC/AISG to issue 2.0 (824-960 Port to Antenna Port) -08: DC/AISG to issue 2.0 (824-960 Port to Antenna Port)
MECHANICAL SPECIFICATIONS* Dimensions mm(in) Weight kg(lbs) Volume Color Housing RF Connectors Mounting Kit 112 x 158 x 74 (4x 6x 3) 2.5 (5.5) maximum 1.3 liter single unit Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS* Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 5 Million Hours According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield EN 60 950, UL 1950, ETL IP65, EN 60 529 ETS 300 019 ETS 300 342-3
92
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Power wave
Powerwaves innovative outdoor enclosure and mobile platform solutions offer flexible combinations of density and serviceability through state of the art modular design and construction. Network operators around the world have made Powerwaves enclosure and mobile platforms their premier choice for housing and deploying critical network infrastructure equipment.
MicroFlex Outdoor Enclosures RapidFlex Outdoor Enclosures SubTerra Controlled Environment Vault VersaFlex Shelter Solutions
POWERWAVE
Page
MicroFlex Outdoor Enclosures RapidFlex Mobile Deployment Unit SubTerra Controlled Environment Vault VersaFlex Shelter Solutions
95 98 100 102
94
POWERWAVE
Title MicroFlex Low-Profile Enclosure for Backhaul and E911 Applications MicroFlex 48RU Outdoor Enclosure
Page 96 97
95
POWERWAVE
MF0-004-000-002
Powerwaves Microflex outdoor enclosure provides 4RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with interchangeable options and accessories. GENERAL SPECIFICATIONS Material High Strength Finish WEIGHTS & MEASURES Dimensions mm(in) Weight kg(lbs) ENVIRONMENTAL SPECIFICATIONS Operating Temperature Wind m/s(mph) Audible Noise (db-A) Thermal Electric Cooling Power COMPLIANCE GR487 CORE UL50 CE RoHS IP55 -10C to 50C 67 (150) 57.0 (not including installed equipment) 200W (calculated 190W @ dT = 0 degree C +/- 10%) 914 x 685 x 254 (36 x 27 x 10) 40 (88) (baseline configuration) High Strength Corrosion Resistant Aluminum Construction TGIC Powdercoat, Color RAL 7035
96
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
MF0-048-000-001
Powerwaves Microflex outdoor enclosure provides 48RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with interchangeable options and accessories. GENERAL SPECIFICATIONS Material High Strength Finish WEIGHTS & MEASURES Dimensions mm(in) Weight kg(lbs) ENVIRONMENTAL SPECIFICATIONS Operating Temperature Wind m/s(mph) Audible Noise (db-A) COMPLIANCE GR487 CORE (Pending) UL50 CE RoHS IP55 -50C to 70C (Internal temperature is dependant on equipment heat load and thermal management options) 67 (150) 57.0 to 65 (depending on thermal management) 2400mm H x 1755mm W x 817mm D (94.5in H x 70.0in W x 32.0in D) 436 kg ( 961lbs) (Cabinet only, no equipment) High Strength Corrosion Resistant Aluminum Construction TGIC Powdercoat, Color RAL 7035
97
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Page 99
98
POWERWAVE
RapidFlex
CW0-000-000-003
GENERAL SPECIFICATIONS Axle: Quantity Axle: Type Brakes Suspension Wheel Bolt Pattern Safety Chains 12V Trailer End Connector Coax Real Diesel Generator, Weather Proof Sound Attenuated Enclosure 7-Bay Telecommunications Shelter Hydraulic Auto Leveling Micro Footprint, Hydraulic Powered Outriggers WEIGHTS & MEASURES Trailor Width Trailor Length Travel Length Overall Width Overall Height Platform Height Tire Size/Type Hitch Ball Size Hitch Weight (lbs) Curb Weight (lbs) GVWR (lbs) GAWR (lbs) Average Payload Capacity (lbs) Tower Height (ft) Maximum Tower Loading (lbs) ACCESSORIES INCLUDED Full-size spare tire Safety pull-away chains Sealed beam DOT lighting package and reflective striping (complies w/ DOT Federal Motor Carrier safety regulations in all 50 states) 7-way electrical hook-up Operation and maintenance manuals Lockable tool box Automatic Transfer Switch Extended Run Double Wall Fuel Tank 3-way antenna mount Wireless Platform Access and Control ADDITIONAL OPTIONS AVAILABLE FAA aviation obstruction lighting kit Wind Speed Anemometer Self-Guy Kit 76 34 36 76 13 6 24 235-75R17.5 Gooseneck 2 5/16 3,000 22,000 30,000 15,000 8,000 102 Rad Center 650 Yes 7-Way Up to (12) 1/2 Coax or (6) 7/8 Coax + 1 flexible conduit 50kW Diesel with extended run time fuel tank Yes Yes Yes Dual Tandem HD Straight Electric Leaf
*All dimensions are nominal and specifications are subject to change without notice.
99
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Page 101
100
POWERWAVE
CEV-000-000-001
Powerwaves Controlled Environment Vault provides 184RU of rack space in a compact foot print. The complete CEV product line is configured to order with interchangeable options and accessories. GENERAL SPECIFICATIONS Material High Strength Finish WEIGHTS & MEASURES Dimensions mm(in) Weight kg(lbs) ENVIRONMENTAL SPECIFICATIONS Operating Temperature Wind m/s(mph) Audible Noise (db-A) COMPLIANCE Designed to GR487 CORE UL Listed CE RoHS Designed to IP55 -40C to 60C (Internal temperature is dependant on equipment heat load and thermal management options) 67 (150) 57.0 to 65 (depending on thermal management options) 3860 x 1955 x 3505 (152 x 77 x 138) 3401 (7500) (baseline configuration) Fiberglass and High Strength Corrosion Resistant Aluminum Construction Brushed Aluminum
101
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Title
VersaFlex 7.0 High-Cube Outdoor Shelter VersaFlex 9.0 High-Cube Outdoor Shelter
Dimensions (ft)
2591 x 3048 x 2286 mm (102 x 120 x 90) 2591 x 4191 x 2286 mm (102 x 165 x 90)
Weight (lbs)
1590 (3500) 1814 (4000)
Page
103 104
102
POWERWAVE
VersaFlex
VersaFlex (7 Bay)
SPECIFICATIONS Length ft(m) Width ft(m) Height in(m) Weight lbs(kg) HVAC Radio Frames Minimum Lease Required 10 (3.05) 76 (2.29) 86: (2.59) 4000 (1814) 2x3 Ton 7 10L x 76W = 75 Sq. Ft. (3.05L x 2.29W = 6.98m2)
Note: Weights and lengths are approximate measurements and will vary based on customer requirements. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Key Features/Benefits:
s
Utilizes approximately half the space of traditional Shelters. Standard weighs only 4,000 lbs (1814 kg) vs. the 30,000 (13608 kg) to 50,000 lbs (22680 kg) of traditional shelters. Internal sub-floor HVAC system that eliminates hot spots. Sliding door design reduces lease area requirements by eliminating door swing. Sliding equipment racks that reduce floor space required and utilizes a rolling cable tray
103
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
VersaFlex
VersaFlex (9 Bay)
SPECIFICATIONS Length ft(m) Width ft(m) Height in(m) Weight lbs(kg) HVAC Radio Frames Minimum Lease Required 139 (4.19) 76 (2.29) 86: (2.59) 4750 (2155) 2x5 Ton 9 139L x 76W = 103.1 Sq. Ft (4.19L x 2.29W = 9.60m2)
Note: Weights and lengths are approximate measurements and will vary based on customer requirements. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Key Features/Benefits:
s
Utilizes approximately half the space of traditional Shelters. Standard weighs only 4,000 lbs (1814 kg) vs. the 30,000 (13608 kg) to 50,000 lbs (22680 kg) of traditional shelters. Internal sub-floor HVAC system that eliminates hot spots. Sliding door design reduces lease area requirements by eliminating door swing. Sliding equipment racks that reduce floor space required and utilizes a rolling cable tray
104
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
Power wave
Powerwaves Coverage products include turn- key coverage and capacity products and solutions that give network operators, facilities owners and neutral hosts an edge over the competition. We specialize in innovative products and solutions from the simplest to the most challenging indoor and outdoor environments that help improve coverage, signal quality and capacity. Our efficient, modular and integrated solutions drive down capital and operating expenses.
Repeater Products In-Building and Outdoor DAS Products Repeater Remote Management Products
105
Coverage Products
POWERWAVE
Coverage Products
Repeater Products Channel Selective Standard Repeaters Band Selective Compact Repeaters Band Selective Standard Repeaters Advanced Train Repeaters Digital Repeaters In-Building and Outdoor DAS Products, Repeater Products Bi-Directional Amplifiers Fiber Optic DAS Master Unit LinkNet Convergence Platform Tap-In Signal Taps Nexus FT - Public Safety In-Building and Outdoor DAS Products, DAS Products Wide Band Radio Heads Nexus FT Single and Dual Band Nexus FT Rack Mounts Repeater Remote Management Base Station Management Interface IP/SNMP/GPS Repeater Remote Management Interface
Page 203 206 208 216 218 Page 220 223 259 Page 265 267
106
Repeater Products
Power wave
Repeater products provide cost-effective coverage solutions for airports, railway stations, tunnels, convention centers, canyons and other environments where structures or natural obstructions interfere with signals. What sets Powerwave repeater products apart is our exceptionally low total lifetime cost. This is due to a number of factors. Our high level of integration delivers a compact form factor that eliminates/minimizes site rental costs. With support for 2G/3G/4G technologies, Powerwave provides a futureproof solution.
Channel Selective Standard Repeaters Band Selective Compact Repeaters Band Selective Standard Repeaters Advanced Train Repeaters Digital Repeaters
Coverage Products
POWERWAVE
Repeater Products
Title Range (MHz) Upgrade Standard Channel Selective,1800 GSM MHz Upgrade Standard Channel Selective,2100 GSM MHz Standard Channel Selective Repeater GSM-R 900MHz Standard Channel Selective Repeater GSM-R 900MHz Standard Channel Selective Repeater GSM-R 900MHz Standard Channel GSM-R Selective Repeater 900MHz Standard Channel GSM-R Selective Repeater 900MHz Standard Channel Selective Repeater GSM-R 900MHz Standard Channel Selective Repeater GSM-R 900MHz Standard Channel GSM-R Selective Repeater 900MHz Standard Channel GSM-R Selective Repeater 900MHz Standard Channel Selective Repeater GSM-R 900MHz Standard Channel Selective Repeater EGSM 900MHz Standard Channel EGSM Selective Repeater 900MHz
No. of Channels 4
Page 110
200 KHz/channel
AR0065/00109
111
200 KHz/channel
AR1700/80208
112
200 KHz/channel
AR1700/80209
113
200 KHz/channel
AR1700/80218
114
200 KHz/channel
AR1700/80219
115
200 KHz/channel
AR1700/80229
116
200 KHz/channel
AR1700/80408
117
200 KHz/channel
AR1700/80409
118
200 KHz/channel
AR1700/80418
119
200 KHz/channel
AR1700/80419
120
200 KHz/channel
AR1700/80429
121
200 KHz/channel
AR1700/90209
122
200 KHz/channel
AR1700/90409
123
108
Coverage Products
POWERWAVE
Repeater Products
Title Standard Channel Selective, 900 MHz Standard Channel Selective, 900 MHz Standard Channel Selective, 1800 MHz Standard Channel Selective, 1800 MHz Standard Channel Selective, 1800 MHz Standard Channel Selective, 1900 MHz Standard Channel Selective, 2100 MHz Standard Repeater Dual Band Channel Selective, 2100MHz Standard Dual Band Channel Selective, 2100MHz Standard Dual Band Channel Selective, 2100MHz Standard Channel Selective, 2100 MHz Standard Channel Selective, 2100 MHz Dual Band Channel Selective 2100/1800 Standard Channel Selective, 2100 MHz
Range (MHz) EGSM GSM GSM GSM GSM GSM WCDMA WCDMA2100
No. of Channels 4 6 2 4 6 4 2 2
Bandwidth 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 4.4 MHz/channel 4.4 MHz/channel
Part Number AR1700/90419 AR1717/90609 AR2700/50209 AR2700/50409 AR2727/50609 AR3700/50409 AR6500/00109 AR6512/00229
WCDMA2100
4.4 MHz/channel
AR6512/00239
132
2 2 2 1 to 2 2
4.4 MHz/channel 200 KHz/channel 200 KHz/channel 4.4 MHz/channel 4.4 MHz/channel
109
POWERWAVE
AR0027/50409
Upgrade Standard Repeater Channel Selective 1800MHz GSM, 4CH, Stand Alone, Seperated Donor/Service
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section N/A N/A Door Section TS 45.005 EN 301 489-1 Bottom Section N/A N/A Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N/A N/A N/A Door Section N-female 440 x 530 x 195 (15x19x8) 22 (48) Bottom Section N/A N/A N/A N/A N/A N/A N/A Door Section N/A N/A N/A N/A N/A N/A N/A Bottom Section N/A N/A N/A Door Section 115/230 VAC N/A 250 W Bottom Section N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Door Section GSM1800 1710-1785 1805-1880 4 200 KHz/channel +28 dBm/channel +28 dBm/channel 55 to 90 dB 4 dB 6 s
Notes:
*Stand alone
110
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR0065/00109
UPGRADE STANDARD REPEATER CHANNEL SELECTIVE 2100MHz WCDMA, 2CH, STAND ALONE, SEPARATE DONOR AND SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section N/A N/A Door Section TS 125 106 TS 125 113 Bottom Section N/A N/A Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N/A N/A N/A Door Section N-female 440 x 530 x 121 (15x19x4.8) 19 (42) Bottom Section N/A N/A N/A N/A N/A N/A N/A Door Section N/A N/A N/A N/A N/A N/A N/A Bottom Section N/A N/A N/A Door Section 115/230 VAC N/A 160 W Bottom Section N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Door Section WCDMA 2100 1920 -1980 2110 - 2170 2 4.4 channel 1ch +30 dBm/channel, 2ch +25 dBm/channel 1ch +20 dBm/channel, 2ch +15 dBm/channel 55 to 85 dB DL 6 dBUL 4 dB 6 s
Notes:
*Stand alone
111
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80208
Standard Channel Selective Repeater 900MHz GSM-R, 2CH, FIBER FED, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 2 200 KHz/channel +33 dBm/channel max +33dBm/channel at fiber optical interface input 55 to 90 dB (DL/UL) 4 dB 5 s -
Remote control via optical link master unit NWM 3.7 and greater
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
112
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80209
Standard Channel Selective Repeater 900MHz GSM-R, 2CH, AC PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 2 200 KHz/channel +33 dBm/channel +33 dBm/channel 55 to 90 dB (DL/UL) 4 dB 5 s -
IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface 900 GSM-R GPRS and IP Ethernet GSM-R SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.7 and greater; local web interface
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
113
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80218
Standard Channel Selective Repeater 900MHz GSM-R, 2CH, FIBER FED, WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 2 200 KHz/channel +33 dBm/channel max +33dBm/channel at fiber optical interface input 55 to 90 dB (DL/UL) 4 dB 5 s -
Remote control via optical link master unit NWM 3.7 and greater
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
114
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80219
Standard Channel Selective Repeater 900MHz GSM-R, 2CH, WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 2 200 KHz/channel +33 dBm/channel +33 dBm/channel 55 to 90 dB (DL/UL) 4 dB 5 s -
IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface 900 GSM-R GPRS and IP Ethernet GSM-R SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.7 and greater; local web interface
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
115
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80229
Standard Channel Selective, 900MHz GSM-R, 2CH, DC PSU, 7/16 CON, GSM 900/1800MHz CS/PS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1
Note: Values within [ ] is valid for a max configuration
116
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80408
Standard Channel Selective Repeater 900MHz GSM-R, 4CH, FIBER FED, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 4 200 KHz/channel +29 dBm/channel max +29dBm/channel at fiber optical interface input 55 to 90 dB (DL/UL) 4 dB 5 s -
Remote control via optical link master unit NWM 3.7 and greater
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
117
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80409
Standard Channel Selective Repeater 900MHz GSM-R, 4CH, AC PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 4 200 KHz/channel +29 dBm/channel +29 dBm/channel 55 to 90 dB (DL/UL) 4 dB 5 s -
IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface 900 GSM-R GPRS and IP Ethernet GSM-R SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.7 and greater; local web interface
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
118
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80418
Standard Channel Selective Repeater 900MHz GSM-R, 4CH, FIBER FED, WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 4 200 KHz/channel +29 dBm/channel max +29dBm/channel at fiber optical interface input 55 to 90 dB (DL/UL) 4 dB 5 s -
Remote control via optical link master unit NWM 3.7 and greater
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
119
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80419
Standard Channel Selective Repeater 900MHz GSM-R, 4CH, WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM-R 876-880 921-925 4 200 KHz/channel +29 dBm/channel +29 dBm/channel 55 to 90 dB (DL/UL) 4 dB 5 s -
IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface 900 GSM-R GPRS and IP Ethernet GSM-R SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.7 and greater; local web interface
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.
Note: Values within [ ] is valid for a max configuration
120
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/80429
Standard Channel Selective, 900MHz GSM-R, 4CH, DC PSU, 7/16 CON, GSM 900/1800MHz CS/PS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway installations: EN 50122 EN 301 489-1
Note: Values within [ ] is valid for a max configuration
121
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/90209
STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
122
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/90409
STANDARD CH SEL REPEATER 900MHz EGSM, 4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
123
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1700/90419
STANDARD CH SEL REPEATER 900MHz EGSM,4CH,AC PSU,7/16 CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
124
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1717/90609
STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
125
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2700/50209
STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface
126
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2700/50409
STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface
127
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2727/50609
STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
128
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR3700/50409
STANDARD CHANNEL SELECTIVE REPEATER 1900MHz GSM, 4CH, 850/1900 MHz GSM/GPRS REMOTE CONTROL, DOOR SW,LOCK-KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
IP/SNMP: 850/1900 Dual Mode Wireless GPRS Packet Data Interface 850 / 1900 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
N-female (7/16 option) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges <26 (57)
129
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6500/00109
Standard Channel Selective Repeater 2100MHz WCDMA, 2Channel, GSM/GPRS REMOTE CONTROL, DOOR Switch
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
WCDMA 1920 -1980 2110 - 2170 2ch 4.4 MHz/channel 1ch +30 dBm/channel, 2ch +25 dBm/channel 1ch +20 dBm/channel, 2ch +15 dBm/channel DL 55 to 85 dB, UL 55 to 85 dB DL 6 dB, UL 4 dB 6 s
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
130
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6512/00229
Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section TS 125 106 TS 125 113 Door Section TS 45.005 EN 301 489-1 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 447x530x297 (17.6x21x11.7) Excluding bracket and hinges <39 (86) Door Section N-female N/A N/A Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 200W Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB, DL 8 dB 6 s Door Section GSM 900 890-915 925-960 Broad band 25 MHz 24 dBm composite 24 dBm composite 55 to 85 dB 7 dB 6 s
Notes:
131
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6512/00239
Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS REM CTRL, Separated Donor and Combined Service, Door Switch
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section TS 125 106 TS 125 113 Door Section TS 45.005 EN 301 489-1 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 447x530x297 (17.6x21x11.7) Excluding bracket and hinges <39 (86) Door Section N-female N/A N/A Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 200W Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm channel +15 dBm/channel 55 to 85 dB UL 5 dB, DL 7 dB 6 s Door Section GSM 900 890-915 935-960 Band Selective 25 MHz +25 dBm composite +26 dBm composite 55 to 85 dB 6 dB 6 s
Notes:
132
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6517/01429
Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section TS 125 106 TS 125 113 Door Section TS 45.005 EN 301 489-1 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 447x530x297 (17.6x21x11.7) Excluding bracket and hinges <39 (86) Door Section N-female N/A N/A Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB DL 8 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel N/A 55 to 90 dB 5 dB 6 s -
Notes:
133
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6517/01439
Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Separated Donor and Combined Service, Door Switch
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section TS 125 106 TS 125 113 Door Section TS 45.005 EN 301 489-1 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 447x530x297 (17.6x21x11.7) Excluding bracket and hinges <39 (86) Door Section N-female N/A N/A Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +15 dBm/channel 55 to 85 dB UL 5 dB DL 7 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel +29 dBm/channel 55 to 90 dB 4 dB 6 s -
Notes:
134
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6517/01459
Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Channels / 900MHz EGSM, 4Channels, AC PSU, 7/16 Connectors, GSM/GPRS REM CTRL, Separated Donor and Combined Service, DOOR Switch, LOCK-KEYS
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section TS 125 106 TS 125 113 Door Section TS 45.005 EN 301 489-1 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section 7/16 female 447x530x297 (17.6x21x11.7) Excluding bracket and hinges <39 (86) Door Section 7/16 female N/A N/A Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm channel +15 dBm/channel 55 to 85 dB UL 5 dB DL 7 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel +29 dBm/channel 55 to 90 dB 4 dB 6 s -
Notes:
135
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6522/01109
Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 1800MHz GSM Low Band, 16.9MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section TS 125 106 TS 125 113 Door Section TS 45.005 EN 301 489-1 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 447x530x297 (17.6x21x11.7) Excluding bracket and hinges <39 (86) Door Section N-female N/A N/A Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 200W Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB DL 8 dB 6 s Door Section GSM 1800 LB 1710-1765 1805-1860 Band Selective 16.9 MHz 28 dBm composite 28 dBm composite 55 to 85 dB 7 dB 6 s -
Notes:
136
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR6560/00209
Standard Channel Selective Repeater 2100MHz WCDMA, 2Ch, High Power, GSM/GPRS REMOTE CONTROL, Door Switch
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 MHz/channel 1ch +37 dBm/channel, 2ch +32 dBm/channel 1ch +20 dBm/channel, 2ch +15 dBm/channel DL 65 to 95 dB, UL 55 to 85 dB DL 6 dB, UL 4 dB 6 s
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
137
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Repeater Products
Title Compact Repeater Band Selective, 2100 MHz Compact Band Selective, 900 MHz Compact Band Selective, 900 MHz Dual Cell Compact Repeater, 900 MHz Compact Band Selective, 1800 MHz Compact Band Selective, 1800 MHz Dual Band Compact Repeater, 1800MHz Dual Band Compact Repeater, 1800MHz Dual Band Compact Repeater, 1800MHz Dual Band Compact Repeater, 1800MHz Compact Band Selective, 1900MHz Compact Band Selective, 1900MHz Compact Band Selective, 1900MHz
Part Number
ALR0062/00109
Page 141
Band selective
0.5 to 25
ALR1200/90209
142
Band selective
0.5 to 25
ALR1200/00209
143
Band selective
0.5 to 25
ALR1212/00209
144
Band selective
0.5 to 25
ALR2200/00209
145
Band selective
0.5 to 25
ALR2200/90209
146
GSM, HSPA+, Band selective LTE GSM, HSPA+, Band selective LTE GSM, HSPA+, Band selective LTE GSM, HSPA+, Band selective LTE TDMA Band selective
0.5 to 15
ALR2212/00119
147
0.5 to 15
ALR2212/00129
148
0.5 to 15
ALR2212/92202
149
0.5 to 15
ALR2222/00109
150
0.5 to 15
ALR3200/00109
151
CDMA
Band selective
0.5 to 15
ALR3200/01109
152
TDMA
Band selective
0.5 to 15
ALR3200/90109
153
138
Coverage Products
POWERWAVE
Repeater Products
Title Compact Band Selective, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 800MHz Compact Dual Band Repeater, 850MHz Compact Dual Band Repeater, 850MHz Compact Band Selective, 850MHz Compact Band Selective, 850MHz Compact Band Selective, 800MHz Compact Band Selective, 2100MHz Compact Dual Band 900/2100
Page 154
CDMA
Band selective
0.5 to 15
ALR3232/51109
155
CDMA
Band selective
0.5 to 15
ALR3242/03039
156
CDMA
Band selective
0.5 to 15
ALR3246/00309
157
TDMA
Broad band
0.5 to 15
ALR3246/010
158
TDMA
Band selective
0.5 to 15/25
ALR4200/00209
159
CDMA
Band selective
0.5 to 15
ALR4200/01109
160
CDMA
Band selective
0.5 to 25
ALR4200/01209
161
CDMA
Broad band
0.5 to 25
ALR4600/00109
162
iDEN
Band selective
0.5 to 15
ALR4600/00119
163
Band selective
0.5 to 18
ALR4600/00209
164
Band selective
0.5 to 15
ALR6200/00109
165
Band selective
0.5 to 15
ALR6212/00102
166
139
Coverage Products
POWERWAVE
Repeater Products
Page 167
WCDMA
Broad band
0.5 to 15
ALR6212/90139
168
Compact In-train Band GSM, HSPA+, Broad band Selective, 900 MHz LTE
0.5 to 25
ALT1200/00209
169
140
POWERWAVE
ALR0062/00109
UPGRADE COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz, STAND ALONE, SEPARATED DONOR/SERVICE
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
WCDMA, HSPA+, LTE 1920-1980 2110-2170 Band Selective 0.5 to 15 MHz +24 dBm Composite +20 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) DL 5 dB, UL 3 dB 6 s -51 dB (LTE) < 6.7% (LTE)
NA NA NA NA NA NA NA
TS 125.106 TS 125.113
Note: Values within [] is valid for a max configuration.
141
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR1200/90209
COMPACT REPEATER BAND SELECTIVE 900MHz EGSM, BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
GSM, HSPA+, LTE 880-905 925-950 Band Selective 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
142
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR1200/00209
COMPACT REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
143
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR1212/00209
COMPACT REPEATER DUAL CELL 900MHz GSM, 25MHz BW/900MHz GSM, 25MHz BW, GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +19 dBm Composite (Combined service ports) +19 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +19 dBm Composite (Combined service ports) +19 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Notes:
144
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR2200/00209
COMPACT REPEATER BAND SELECTIVE 1800MHz GSM LB, BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 25 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
145
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR2200/90209
COMPACT REPEATER BAND SELECTIVE 1800MHz GSM UB, BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
GSM, HSPA+, LTE 1730-1785 1825-1880 Band Selective 0.5 to 25 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
146
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR2212/00119
COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz, 15/15MHz BW, GSM/GPRS REM CTRL, SEPARATED DONOR/SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 15 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 15 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Notes:
147
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR2212/00129
COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz, 15/15MHz BW, GSM/GPRS REM CTRL, COMBINED DONOR/SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 15 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 15 MHz +21 dBm Composite +21 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Notes:
148
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR2212/92202
COMPACT REPEATER DUAL BAND GSM1800 UB/GSM900MHz, 25/25MHz BW, GSM/GPRS REM CTRL, SEPARATED DONOR/SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM, HSPA+, LTE 1730-1785 1825-1880 Band Selective 0.5 to 25 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Notes:
149
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR2222/00109
Compact Repeater Dual Cell 1800MHz GSM LB, 15MHz BW/1800MHz GSM LB, 15MHz BW, GSM/GPRS Remote Control, Combined Donor And Service
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 15 MHz +20 dBm Composite (Combined service ports) +20 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Door Section GSM, HSPA+, LTE 1710-1765 1805-1860 Broad band 0.5 to 15 MHz +20 dBm Composite (Combined service ports) +20 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface
Notes:
The combined output power at donor and service port is 3dB lower than the nominal output power for each repeater cell.
150
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3200/00109
COMPACT REPEATER BAND SELECTIVE 1900MHz GSM LB, BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
TDMA 1850-1890 1930-1970 Band Selective 0.5 to 15 MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -
151
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3200/01109
COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA LB, BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 1850-1890 1930-1970 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -
152
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3200/90109
COMPACT REPEATER BAND SELECTIVE 1900MHz GSM UB, BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
TDMA 1870-1910 1950-1990 Band Selective 0.5 to 15 MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -
153
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3200/91109
COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA UB, BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 1870-1910 1950-1990 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -
154
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3232/51109
COMPACT REPEATER DUAL CELL 1900MHz CDMA LB, 15MHz BW/1900MHz CDMA UB, 15MHz BW, COMBINED DONOR/SERVICE
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 1870-1910 (UB)/ 1850-1890 (LB) 1950-1990 (UB)/ 1930-1970 (LB) Band Selective 0.5 to 15 MHz +23 dBm Composite (UB and LB combined ports) +23 dBm Composite (UB and LB combined ports) 55 to 70 dB 8 dB 6 s -
NA NA
155
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3242/03039
COMPACT REPEATER DUAL BAND CDMA 1900 MHz LB/CDMA 800MHz, 15/15MHz BW, SEPARATED DONOR/SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section FCC Rule 24 FCC Rule 24 Door Section FCC Rule 22 FCC Rule 22 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female (7/16 option) N/A N/A Bottom Section NA NA NA NA NA NA NA Door Section NA NA NA NA NA NA NA Bottom Section 85-265 VAC NA 60W Door Section 115/230 VAC NA 60 W Bottom Section CDMA 1900 1850-1890 1930-1970 Band Selective 0.5 to 15 MHz +26 dBm Composite +26 dBm Composite 55 to 70 dB 8 dB 6 s Door Section CDMA 800 824-849 869-894 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -
Notes:
156
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3246/00309
COMPACT REPEATER DUAL BAND GSM 1900 MHz LB/iDEN 800 MHz, 15/15MHz BW, SEPARATED DONOR/COMBINED SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section FCC Rule 24 FCC Rule 24 Door Section FCC Rule 90 FCC Rule 90 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female (7/16 option) N/A N/A Bottom Section NA NA NA NA NA NA NA Door Section NA NA NA NA NA NA NA Bottom Section 85-265 VAC NA 60W Door Section 115/230 VAC NA 60 W Bottom Section GSM 1900 1850-1890 1930-1970 Band Selective 0.5 to 15 MHZ +24 dBm Composite +25 dBm Composite 55 to 70 dB 9 dB 6 s Door Section iDEN 806-824 851-869 Band Selective 0.5 to 15 MHz +24 dBm Composite +25 dBm Composite 55 to 70 dB 9 dB 6 s -
Notes:
157
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR3246/010 family
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC Bottom Section FCC Rule 24 FCC Rule 24 Door Section FCC Rule 90 FCC Rule 90 Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female (7/16 option) N/A N/A Bottom Section Door Section Bottom Section 85-265 VAC 21-60 VDC (optional) 60W Door Section 115/230 VAC 21-60 VDC (optional) 60 W Bottom Section TDMA 1900 1850-1890 1930-1970 Broad band 0.5 to 15 +25 dBm Composit +25 dBm Composit 55 to 70 dB 8 dB 6 s Door Section iDEN 806-824 851-869 Broad band 0.5 to 15/18 MHz +25 dBm Composit N/A 55 to 70 dB 8 dB 6 s
Notes:
Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB
158
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR4200/00209
COMPACT REPEATER BAND SELECTIVE 850MHz AMPS, BW25MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
TDMA 824-849 869-894 Band Selective 0.5 to 25 MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -
159
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR4200/01109
COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 824-849 869-894 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -
160
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR4200/01209
COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW25MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 824-849 869-894 Band Selective 0.5 to 25 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -
161
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR4600/00109
COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
iDEN 806-824 851-869 Band Selective 0.5 to 15MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -
162
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR4600/00119
COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, 850/1900 MHz GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
iDEN 806-824 851-869 Band Selective 0.5 to 15MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -
IP/SNMP 850/1900 Dual Mode Wireless GPRS Packet Data Interface 850 / 1900 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater
163
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR4600/00209
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
iDEN 806-824 851-869 Band Selective 0.5 to 18MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -
NA NA NA NA NA NA NA
164
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR6200/00109
COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
WCDMA, HSPA+, LTE 1920-1980 2110-2170 Band Selective 0.5 to 15 MHz +24 dBm Composite +20 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) DL 5 dB, UL 3 dB 6 s -51 dB (LTE) < 6.7% (LTE)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
TS 125.106 TS 125.113
Note: Values within [] is valid for a max configuration.
165
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR6212/00102
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section WCDMA, HSPA+, LTE 1920 -1980 2110 - 2170 Broad band 0.5 to 15 +24 dBm Composit +20 dBm Composit 55 to 70 dB DL 5 dBUL 3 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Door Section GSM, HSPA+, LTE 890-915 935-960 Broad band 0.5 to 15 MHz +22 dBm Composit N/A 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Door Section
Notes:
Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB
166
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR6212/90129
COMPACT REPEATER DUAL BAND WCDMA/EGSM, 2100/900MHz, 15/25MHz BW, GSM/GPRS REM CTRL,COMBINED DONOR AND SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section WCDMA 2100 1920 -1980 2110 - 2170 Band Selective 0.5 to 15 +23 dBm Composite +19 dBm Composite 55 to 70 dB DL 5 dBUL 3 dB 6 s -51dB (LTE) < 6.7% (LTE)
Door Section EGSM 900 880-915 925-960 Band Selective 0.5 to 25 MHz +21 dBm Composite +21 dBm Composite 55 to 70 dB 8 dB 6 s -
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Door Section NA NA NA NA NA NA NA
Notes:
167
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALR6212/90139
COMPACT REPEATER DUAL BAND WCDMA/EGSM,2100/900MHz,15/25MHz BW,AC PSU,GSM/GPRS REM CTRL,SEPARATE DONOR/COMBINED SERVICE
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section WCDMA 2100 1920 -1980 2110 - 2170 Broad band 0.5 to 15 +23 dBm Composite +20 dBm Composite 55 to 70 dB DL 5 dBUL 3 dB 6 s -51dB (LTE) < 6.7% (LTE)
Door Section EGSM 900 880-915 925-960 Band Selective 0.5 to 25 MHz +21 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Notes:
168
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ALT1200/00209
COMPACT IN-TRAIN REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
GSM, HSPA+, LTE 890-915 935-960 Broad band 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
169
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Repeater Products
Title Maritime Standard Band Selective, 900MHz Standard Band Selective, 900MHz Standard Band Selective, 900MHz Standard Band Selective, 1800MHz Standard Band Selective, 1800MHz Standard Band Selective, 1800MHz Standard Band Selective, 900/1800MHz Standard Dual Band Selective, 1800MHz Standard Band Selective, 1900MHz Standard Band Selective, 1900MHz Standard Band Selective, 1900MHz Standard Band Selective, 850MHz Standard Band Selective, 800MHz Standard Band Selective, 800MHz
Bandwidth (MHz)
0.5 to 25
Page 171
GSM, HSPA+
Broad band
0.5 to 25
AR1200/05309
172
GSM, HSPA+
Broad band
0.5 to 16.9
AR1200/95209
173
GSM
Broad band
0.5 to 16.9
AR200/00
174
GSM
Band selective
0.5 to 16.9
AR2200/00109
175
GSM
Broad band
0.5 to 16.9
AR200/90109
176
GSM
Broad band
0.5 to 16.9
AR2212/052
177
GSM
Band selective
0.5 to 16.9
AR2212/05209
178
CDMA
Band selective
0.5 to 16.9
AR3400/01109
179
CDMA
Band selective
0.5 to 16.9
AR3400/91109
180
CDMA
Band selective
0.5 to 16.9
AR3434/51109
181
CDMA
Band selective
0.5 to 16.9
AR4200/01209
182
SMR/iDEN
Broad band
0.5 to 18
AR4600/05309
183
SMR/iDEN
Broad band
0.5 to 18
AR4640/05309
184
170
POWERWAVE
AM1200/05309
STANDARD BAND SELECTIVE MARITIME REPEATER 900MHz GSM, BW25MHz, GSM/GPRS/GPS REMOTE CONTROL, Door Switch
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM 890-915 935-960 Band Selective 0.5 to 25 MHz +26 dBm Composite +26 dBm Composit 55 to 85 dB (Gain trail dynamic range: 30dB and gain trail tracking accuracy: 2dB) 6 dB 6 s -
IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
171
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1200/05309
STANDARD BAND SELECTIVE REPEATER 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM, HSPA+ 890-915 935-960 Broad band 0.5 to 25 MHz +26 dBm Composite +26 dBm Composite 55 to 85 dB / Gain ripple in band +/-2 dB 6 dB 6 s 43 dB (HSPA+) < 6% (HSPA+)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
172
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR1200/95209
STANDARD BAND SELECTIVE REPEATER 900MHz EGSM,BW16.9MHz,AC PSU,N CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM, HSPA+ 880-915 925-960 Band Selective 0.5 to 16.9 MHz +26 dBm Composite +26 dBm Composite 55 to 85 dB / Gain ripple in band +/-2 dB 6 dB 6 s 43 dB (HSPA+) < 6% (HSPA+)
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
173
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2200/00
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
GSM 1710-1765 1805-1860 Broad band 0.5 to 16.9 MHz +29 dBm Composit +29 dBm Composit 55 to 85 dB 6 dB 6 s
174
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2200/00109
STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM LB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM 1710 - 1765 1805 - 1860 Broad band 0.5 to 16.9 MHz +29 dBm Composite +29 dBm Composite 55 to 85 dB 6 dB 6 s -
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
175
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2200/90109
STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM UB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* RF Connection Dimension (HxWxD)(mm) Weight kg (lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit (Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change without notice.
GSM 1730 - 1785 1825 - 1880 Band Selective 0.5 to 16.9 MHz +29 dBm Composite +29 dBm Composite 55 to 85 dB 6 dB 6 s -
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
176
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2212/052 family
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM 1800 1710-1765 1805-1860 Broad band 0.5 to 16.9 +29 dBm Composit +29 dBm Composit 55 to 85 dB 7 dB 6 s
Door Section GSM 900 890-915 935-960 Broad band 0.5 to 16.9/25 MHz +26 dBm Composit N/A 55 to 85 dB 7 dB 6 s
Bottom Section
Door Section
Bottom Section N-female (7/16 option) 440 x 530 x 280 (1 5x19x11) 37 (82)
Notes:
Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB
177
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR2212/05209
STANDARD BAND SELECTIVE REPEATER DUAL BAND 1800MHz LB, BW16.9MHz/900MHz GSM, 16.9MHz BW, GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND SERVICE, DOOR SWITCH
ELECTRICAL DATA* Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM TECHNICAL SPECIFICATIONS* Section Power Supply Power Supply (Optional) Power Consumption REMOTE CONTROL* Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management MECHANICAL DATA* Section RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Section Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Section Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
Bottom Section GSM 1800 1710 - 1765 1805 - 1860 Band Selective 0.5 to 16.9 +28 dBm Composite +28 dBm Composite 55 to 85 dB 6 dB 6 s -
Door Section GSM 900 890-915 935-960 Band Selective 0.5 to 16.9 MHz +25 dBm Composite +25 dBm Composite 55 to 85 dB 6 dB 6 s -
Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface
Notes:
Performance is affected by the way Donor and Service antenna is configured. *If combined to common antenna, output power decrease 1dB and NF increase 1dB
178
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR3400/01109
STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA LB, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 1850-1890 1930-1970 Band Selective 0.5 to 16.9 MHz +33 dBm Composite +33 dBm Composite 55 to 85 dB 6 dB 6 s
179
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR3400/91109
STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA UB, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 1870-1910 1950-1990 Band Selective 0.5 to 16.9 MHz +33 dBm Composite +33 dBm Composite 55 to 85 dB 6 dB 6 s
180
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR3434/51109
STANDARD BAND SELECTIVE REPEATER DUAL CELL 1900MHz CDMA UB,BW16.9MHz/1900MHz CDMA LB,BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 1870-1910 (UB) / 1850-1890 (LB) 1950-1990 (UB) / 1930-1970 (LB) Band Selective 0.5 to 16.9 MHz (UB and LB) +30 dBm Composite (combined UB and LB ports) +30 dBm Composite (combined UB and LB ports) 55 to 85 dB 6 dB 6 s
181
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR4200/01209
STANDARD BAND SELECTIVE REPEATER 850MHz CDMA, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
CDMA 824-849 869-894 Band Selective 0.5 to 16.9 MHz +33 dBm Composite +30 dBm Composite 55 to 85 dB 6 dB 6 s
182
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR4600/05309
STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
SMR/iDEN 806-824 851-869 Broad band 0.5 to 18 MHz +33 dBm Composite +33 dBm Composite 55 to 85 dB 6 dB 6 s
183
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
AR4640/05309
STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, HIGH POWER, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA* Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay TECHNICAL SPECIFICATIONS* Power Supply Power Supply (Optional) Power Consumption MECHANICAL DATA* RF Connection Dimension (HxWxD)mm(ft) Weight kg(lbs) ENVIRONMENTAL DATA* Operating Temperature Fahrenheit(Celsius) Housing Specification APPROVALS AND TESTS* Regulatory Compliance Radio Regulatory Compliance EMC
*All specifications subject to change.
SMR/iDEN 806-824 851-869 Broad band 0.5 to 18 MHz +36 dBm Composite +33 dBm Composite 65 to 95 dB 6 dB 6 s
184
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Repeater Products
Frequency Range Up-Link (MHz) 890-915 Frequency Range Down-Link (MHz) 935-960
Title Advanced Train Repeater Module 900 MHz (GSM and UMTS) Advanced Train Repeater Module 900 MHz (GSM and UMTS) Advanced Train Repeater Module 900 MHz (EGSM and UMTS) Advanced Train Repeater Module 900 MHz (GSM and UMTS)
Part Number ATR1200/001xy (GSM 900) ATR1200/002xy (GSM 900) ATR1200/901xy (EGSM 900) ATR1200/902xy (EGSM 900)
Page 186
890-915
935-960
187
880-905
925-950
188
880-905
925-950
189
185
POWERWAVE
Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 15MHz ELECTRICAL SPECIFICATIONS Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity Vibration Ingress Protection APPROVALS AND TESTS Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4 -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female 890-915 935-960 0,5-15 25 50-70 dB 1 dB 30 dB 2 dB +23 dBm (UL), +18 dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
186
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ATR1200/002xy (GSM900)
Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 25MHz ELECTRICAL SPECIFICATIONS Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity Vibration Ingress Protection APPROVALS AND TESTS Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4 -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female 890-915 935-960 0,5-25 25 50-70 dB 1 dB 30 dB 2 dB +23 dBm (UL), +18 dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
187
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ATR1200/901xy (EGSM900)
Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 15MHz ELECTRICAL SPECIFICATIONS Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity Vibration Ingress Protection APPROVALS AND TESTS Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4 -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female 880-905 925-950 0,5-15 25 50-70 dB 1 dB 30 dB 2 dB +24 dBm (UL), +18 dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
188
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
ATR1200/902xy (EGSM900)
Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 25MHz ELECTRICAL SPECIFICATIONS Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Humidity Vibration Ingress Protection APPROVALS AND TESTS Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4 -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female 880-905 925-950 0,5-25 25 50-70 dB 1 dB 30 dB 2 dB +24 dBm (UL), +18dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
189
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Digital Repeaters
Repeater Products
Title Nexus RT 850/1900 MHz Dual Band Digital Repeater Nexus RT 850 MHz Digital Repeater Nexus RT 1900 MHz Digital Repeater Nexus RT 1900 MHz Digital Repeater with Modem Nexus RT Digital Repeater Triple Band 900/1800/2100MHz Nexus RT Digital Repeater Single Band 900MHz Nexus RT Digital Repeater Single Band 900/1800MHz Nexus RT Digital Repeater Dual Band 900/2100MHz Nexus RT Digital Repeater Single Band 1800MHz Nexus RT Digital Repeater Dual Band 1800/2100MHz Nexus RT Digital Repeater Single Band 2100MHz
Bandwidth (MHz) 25
Page 191
824-849
25
NP5O-11111
192
1850-1910
60
NPBO-11111
193
880-915
35
194
880-915
35
195
880-915
35 75 (1800MHz band), 60 (2100MHz band) 35 (900MHz band), 60 (2100MHz band) 75 75 (1800MHz band), 60 (2100MHz band) 60
196
RTM1GU-A2A1.J2J1
197
880-915/1920-1980
RTM1GU-A2A1.L2L1
198
1710-1785
RTM1GU-J2J1
199
RTM1GU-J2J1.L2L1
200
1920 to 1980
RTM1GU-L2L1
201
190
POWERWAVE
Digital Repeaters
NP50B0-22111
ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Parts 22 and 24 -30 C to +50 C IP 50 381 x 305 x 229(15 x 12 x 9) < 50 N-type Female 1.5 2.5 10 11 25 25 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 6.6 dB (max. gain) >20 dB IP connection or wireless modem 110-120 VAC < 400 W 824 - 849 869-894 25 (850) 1 to 2 (850MHz), 1 to 5 (1900MHz) 2.5 5 7.5 10 15 20 60 1850 -1910 1930 -1990 60 (1900)
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
191
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
NP5O-11111
ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Part 22 -30 C to +50 C IP 50 381 x 305 x 229(15 x 12 x 9) 40 N-type Female 824 - 849 869-894 25 1 to 2 1.5 2.5 10 11 25 25 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 6.6 dB (max. gain) >20 dB IP connection or wireless modem 110-120 VAC < 200 W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
192
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
NPBO-11111
ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Part 24 -30 C to +50 C IP 50 381 x 305 x 229(15 x 12 x 9) 40 N-type Female 1850-1910 1930-1990 60 1 to 5 2.5 5 7.5 10 15 20 60 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 5 dB >20 dB IP connection or wireless modem 110-120 VAC < 200 W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
193
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
NPBO-11311
ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Part 24 -30 C to +50 C IP 50 381 x 305 x 229(15 x 12 x 9) 40 N-type Female 1850-1910 1930-1990 60 1 to 5 2.5 5 7.5 10 15 20 60 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 5 dB >20 dB GPRS/Edge Mode (or IP connection ) 110-120 VAC < 200 W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
194
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM11GUA2A1.J2J1.L2L1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM11GU-A2A1.J2J1.L2L1 has one service port per band, double power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink 35 880 - 915 925 - 960 35 1710 - 1785 1805 - 1880 75 Up to 8 From 0.2 up to 20 75 55 - 100 dB +36 dBm composite (4 GSM carriers +35 dBm composite (4 GSM carriers at +28 dBm), +35 dBm composite at +28 dBm), +34 dBm composite (WCDMA/LTE) (WCDMA/LTE) +36 dBm composite (4 GSM carriers +35 dBm composite (4 GSM carriers at +28 dBm), +35 dBm composite at +28 dBm), +34 dBm composite (WCDMA/LTE) (WCDMA/LTE) 5 dB (75-100dB gain) <6 s > 30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 805 W, typical average < 475W +35 dBm composite 60 1920 - 1980 2110 - 2170 60
Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio
560 x 760 x 340 (22.0x 30.0x 13.4) <60 kg (<132 lbs) N-type Female
EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-Radio 11, EN 301 908-15
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
195
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM1GU-A2A1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1 has first power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-11, EN 301 908-15 -40 C to +55 C IP 65 560 x 400 x 340 (22.0x 15.8x 13.4) <62 (< 28 kg) N-type Female 880 - 915 925-960 35 Up to 8 From .2 up to 20 35 55-100 dB +36 dBm composite (4 GSM carriers at +28 dBm) +36 dBm composite (WCDMA/LTE) +36 dBm composite (4 GSM carriers at +28 dBm) +36 dBm composite (WCDMA/LTE) 5 dB (75-100dB gain) <6 s >30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 305 W, typical average 178W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
196
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM1GU-A2A1.J2J1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1.J2J1 has one service port per band, first power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-11, EN 301 908-15 -40 C to +55 C IP 65 560 x 580 x 340 (22.0x 22.9x 13.4) <97 (<44kg) N-type Female 880 - 915 / 1710 - 1785 925 - 960 / 1805 - 1880 35 (900MHz band), 75 (1800MHz band) Up to 8 From .2 up to 20 35 (900MHz band), 75 (1800MHz band) 55-100 dB +36 dBm composite (900), +35 dBm composite (1800), (4 GSM carriers at +28 dBm) +36 dBm composite (900), +35 dBm composite (1800), (WCDMA/LTE) +36 dBm composite (900), +35 dBm composite (1800), (4 GSM carriers at +28 dBm) +36 dBm composite (900), +35 dBm composite (1800), (WCDMA/LTE) 5 dB (75-100dB gain) <6 s >30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 555W, typical average < 325W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
197
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM1GU-A2A1.L2L1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1.L2L1 has one service port per band, first power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-11, EN 301 908-15 -40 C to +55 C IP 65 560 x 580 x 340 (22.0x 22.9x 13.4) <97 (<44kg) N-type Female 880 - 915 / 1920 - 1980 925 - 960 / 2110 - 2170 35 (900MHz band), 60 (2100MHz band) Up to 8 From .2 up to 20 35 (900MHz band), 60 (2100MHz band) 55-100 dB +36 dBm composite (900), (4 GSM carriers at +28 dBm) +36 dBm composite (900), +35 dBm composite (2100), (WCDMA/LTE) +36 dBm composite (900), (4 GSM carriers at +28 dBm) +36 dBm composite (900), +35 dBm composite (2100), (WCDMA/LTE) 5 dB (75-100dB gain) <6 s >30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 555W, typical average < 325W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
198
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM1GU-J2J1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-J2J1 has first power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-11, EN 301 908-15 -40 C to +55 C IP 65 560 x 400 x 340 (22.0x 15.8x 13.4) <62 (< 28 kg) N-type Female 1710 to 1785 1805 to 1880 75 Up to 8 From .2 up to 20 75 55-100 dB +35 dBm composite (4 GSM carriers at +28 dBm) +35 dBm composite (WCDMA/LTE) +35 dBm composite (4 GSM carriers at +28 dBm) +35 dBm composite (WCDMA/LTE) 5 dB (75-100dB gain) <6 s >30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 305W, typical average 178W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
199
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM1GU-J2J1.L2L1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-J2J1.L2L1 has one service port per band, first power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-11, EN 301 908-15 -40 C to +55 C IP 65 560 x 580 x 340 (22.0x 22.9x 13.4) <97 (<44kg) N-type Female 1710 - 1785/ 1920 - 1980 1805 - 1880 / 2110 - 2170 75 (1800MHz band), 60 (2100MHz band) Up to 8 From .2 up to 20 75 (1800MHz band), 60 (2100MHz band) 55-100 dB +35 dBm composite (1800), (4 GSM carriers at +28 dBm) +35 dBm composite (1800 & 2100 WCDMA/LTE) +35 dBm composite (1800), (4 GSM carriers at +28 dBm) +35 dBm composite (1800 & 2100 WCDMA/LTE) 5 dB (75-100dB gain) <6 s >30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 555W, typical average < 325W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
200
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Digital Repeaters
RTM1GU-L2L1
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-L2L1 has first power supply AC type, GSM/UMTS MODEM ELECTRICAL SPECIFICATIONS Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Group Delay Feedback Cancellation Alarm Fault Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm (in) Weight lbs RF Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Casing Class APPROVALS AND TESTS Safety Environment EMC Radio EN 60950-1 ETS 300 019 EN 301 489-1, EN301 489-8, EN301 489-23 EN 300 609-4, EN 301 908-11, EN 301 908-15 -40 C to +55 C IP 65 560 x 400 x 340 (22.0x 15.8x 13.4) <62 (< 28 kg) N-type Female 1920 to 1980 2110 to 2170 60 Up to 8 From .2 up to 20 60 55-100 dB NA +35 dBm composite NA +35 dBm composite 5 dB (75-100dB gain) <6 s >30 dB IP connection or wireless modem 97-132 VAC, 195-265 VAC; 21-60 VDC (option) < 305 W, typical average 178W
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
201
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Power wave
Turnkey Projects
We deliver complete turnkey solutions for wireless coverage. We manage the entire project with full responsibility, starting with analyzing and determining required signal strength, quality and planning for future expansion, right through implementation and operations. All Powerwave turnkey systems are backed by full performance guarantees, with full product and component warranties for your peace of mind.
Powerwave Products
As new wireless services, technologies and opportunities emerge, the ability to rapidly adapt will become even more vital to network operators, building owners and public safety agencies. Thats why Powerwave engineers flexibility into every system. Its why we choose components that are modular and adaptable. And its why our coverage solutions are built from the ground up to be versatile.
Coverage Products
POWERWAVE
Bi-Directional Amplifiers
Title In-Hancer Plus Series Bi-Directional Amplifier In-Hancer Plus Series Bi-Directional Amplifier
Gain Range 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L) 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)
Page 204
450-512
SB400-B
205
203
POWERWAVE
Bi-Directional Amplifiers
SB400-A
Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages. MODULE SPECIFICATIONS* Frequency Range (MHz) Passband Ripple Digital Gain Adjustment AGC Dynamic Range Gain_Range ID 3rd Order Intercept Point IP3 Noise Figure Propagation Delay Input Impedance VSWR Maximum RF Input Primary Power MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Enclosure ACCEPTANCE TYPE* FCC Type Acceptance IC Type Acceptance Filtering Options SB400-F1 SB400-F5 SB400-F2L SB400-F2H1 SB400-F3 SB400-F4L SB400-F4H1 SB400-F2H2 SB400-F4H2 SB400-F2H3 SB400-F4H3 H6M-SB400 541A-SB400 *Range 380-430 MHz 380-430 MHz 403-430 MHz 403-430 MHz 403-430 MHz 403-430 MHz 403-430 MHz NA NA NA NA * Passband Bandwidth 1.0 MHz 5.0 MHz 1.5 MHz 1.5 MHz 1.5 MHz 3.0 MHz 3.0 MHz 1.5 MHz 3.0 MHz 1.5 MHz 3.0 MHz Tx to Rx Separation 5.0 MHz 10.0 MHz 3.0 MHz 3.0 MHz 5.0 MHz 5.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz 26.28 x 24 x 12.25 120 lbs. approx -10C to +50 Painted Steel - Wall Mount (Stainless Steel upgrade available) 380-430 2.5 dB In 1 dB Increments 25 dB 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L) +44 dBm <12 dB <1 s 50 <2:1 +10 dBm 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
204
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Bi-Directional Amplifiers
SB400-B
Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages. MODULE SPECIFICATIONS* Frequency Range (MHz) Passband Ripple Digital Gain Adjustment AGC Dynamic Range Gain_Range ID 3rd Order Intercept Point IP3 Noise Figure Propagation Delay Input Impedance VSWR Maximum RF Input Primary Power MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Enclosure ACCEPTANCE TYPE* FCC Type Acceptance IC Type Acceptance Filtering Options SB400-F1 SB400-F5 SB400-F2L SB400-F2H1 SB400-F3 SB400-F4L SB400-F4H1 SB400-F2H2 SB400-F4H2 SB400-F2H3 SB400-F4H3 H6M-SB400 541A-SB400 *Range 450-512 MHz 450-512 MHz 450-512 MHz NA 450-512 MHz 450-512 MHz NA 450-4 70 MHz 450-4 70 MHz 470-512 MHz 470-512 MHz * Passband Bandwidth 1.0 MHz 5.0 MHz 1.5 MHz 1.5 MHz 1.5 MHz 3.0 MHz 3.0 MHz 1.5 MHz 3.0 MHz 1.5 MHz 3.0 MHz Tx to Rx Separation 5.0 MHz 10.0 MHz 3.0 MHz 3.0 MHz 5.0 MHz 5.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz 26.28 x 24 x 12.25 120 lbs. approx -10C to +50 Painted Steel - Wall Mount (Stainless Steel upgrade available) 450-512 2.5 dB In 1 dB Increments 25 dB 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L) +44 dBm <12 dB <1 s 50 <2:1 +10 dBm 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
205
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Page 207
206
POWERWAVE
Coverage Solutions
UA115 04
The Fiber Base Unit (FBU) for Distributed Antenna Systems (DAS) applications is especially tailored to provide a comprehensive and flexible coverage solution in complex coverage environments like underground areas, tunnels, stations and terminals. The FBU converts and reconverts RF signals to optical signals. The truly modular design of the FBU ensures a cost efficient solution for any DAS configuration. Configurable with up to six fiber optical nodes with WDM as an option, the FBU is intended to feed star, point-to-point and chain network configurations of fiber optical repeaters. The FBU is designed for mounting in a 19-inch rack system and the slot-in design of the modules ensures easy serviceability and reconfiguration. Remote control via IP and SNMP is available as an option for network supervision with Powerwave Netway Vision. ELECTRICAL SPECIFICATIONS Bandwidth Input Impedence Max Input RF Power Optical Transmitter Wavelength Optical Receiver Wavelength Insertion Loss (min) Alarms Fault External Alarm Inputs Power Supply Options Power Consumption Supported RF Systems MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight lbs RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Operating Temperature Ingress Protection APPROVALS AND TESTS Safety Radio Environment EMC -30 to + 55 C (Ambient) IP42 EN 300 019 and GR-63-CORE EN 301 489-1 and GR-1089-CORE -30 to + 55 C (Ambient) IP42 482.6 x 133.5 (3U) x 415 (19 x 5 x 16) <7 (15) SMA Female FC/APC RX and TX Alarms/Temperature/PSM Fault 3 100-230 VAC and 16-60 VDC < 50 W, depending on configuration 2100UMTS, GSM1800, 2100AWS, 1900, 900i, GSM-R, 850, 800i, 700PS and D-block 690-2200 MHz 50 Ohm +36 dBm (+35 dBm composite) 1550 nm/1310nm 1250 - 1600nm 0.25 dB Alarms
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
207
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Frequency Range (MHz) Bandwidth 806-940 Broadband Amplifier Narrowband FM 12.5 or 25 KHz 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz Broadband Amplifier 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz Narrowband FM 12.5 or 25 KHz Narrowband FM 12.5 or 25 KHz
Page 209
406.125-430, 450-512
LNKF400
210
N/A
LNKC1900
211
890-960
LNKA900
212
N/A
LNKC1800
213
LNKF100
214
LNKF800
LNKF800
215
208
POWERWAVE
LNKA800
LNKA800 Amplifier
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 806-940 NA NA Broadband Amplifier +34 dB to +84 dB, in 1 dB increments +15 dBm to +30 dBm NA NA NA NA NA NA NA NA NA NA NA +47 dBm Typical <8 dB, 5 dB Typical Continuous -13 dBm Maximum -57 dBm Maximum <200 nS NA 40Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
Type Broadband Amplifier Broadband Amplifier Broadband Amplifier Broadband Amplifier Broadband Amplifier Broadband Amplifier NA NA
Frequency 806-824 MHz 851-869 MHz 824-849 MHz 869-894 MHz 896-902 MHz 928-940 MHz NA NA
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
209
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LNKF400
LNKF400
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 406.125 - 430, 450 - 512 MHz NA NA Narrowband FM 12.5 or 25 KHz NA NA Tracks input signal exactly +37 dBm +17 dBm to +37 dBm +/- 1 dB NA NA NA -110 dBm to -30 dBml -110 dBm to -50 dBm 1 dB to 10 dB 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules NA NA Continuous -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules -57 dBm Maximum <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules 45 Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode, Receive, Transmit Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE* FCC Type Acceptance IC Type Acceptance H6M-OFR400-A, H6M-OFR400 1541195680A
* Module Family LNKF400-A1 LNKF400-A2 LNKF400-C1 LNKF400-C2 LNKF400-D1 LNKF400-D2 LNKF400-E1 LNKF400-E2
Type 25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels
Frequency 406.125-430 MHz 406.125-430 MHz 450-470 MHz 450-470 MHz 470-490 MHz 470-490 MHz 490-512 MHz 490-512 MHz
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
210
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LNKC1900
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options NA 1850-1910, 1930-1990 NA 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz +65 dB to +95 dB, in 1 dB increments NA Tracks input signal exactly NA NA NA 1 Carrier: +27 dBm 2 Carrier: +23 dBm each 3 Carrier: +21 dBm each NA NA NA NA +44 dBm <6 dB Continuous -13 dBm Maximum -57 dBm Maximum <5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models NA 40Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
* Module Family LNKC1900-D.2 LNKC1900-D LNKC1900-D5 LNKC1900-D15 LNKC1900-U.2 LNKC1900-U LNKC1900-U5 LNKC1900-U15
Type Downlink 0.25 MHz Bandwidth Downlink 1.25 MHz Bandwidth Downlink 5 MHz Bandwidth Downlink 15 MHz Bandwidth Uplink 0.25 MHz Band Uplink 1.25 MHz Bandwidth Uplink 5 MHz Bandwidth Uplink 15 MHz Bandwidth
Frequency 1930-1990 MHz 1930-1990 MHz 1930-1990 MHz 1930-1990 MHz 1850-1910 MHz 1850-1910 MHz 1850-1910 MHz 1850-1910 MHz
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
211
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LNKA900
LNKA900
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 890-960 NA NA Broadband Amplifier +34 dB to +84 dB, in 1 dB increments +15 dBm to +30 dBm NA NA NA NA NA NA NA NA NA NA NA +47 dBm Typical <8 dB, 5 dB Typical Continuous -13 dBm Maximum -57 dBm Maximum <200 nS NA 40Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode Modules may be configured via optionalGateway Module, or via PC and an RS-232Connection
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2 x 9.11 x 14 (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
212
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LNKC1800
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options NA 1805-1880 1710-1785 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz +65 dB to +95 dB, in 1 dB increments NA Tracks input signal exactly NA NA NA NA NA NA NA NA NA NA +44 dBm <6 dB Continuous -13 dBm Maximum -57 dBm Maximum <5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models NA 40Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
* Module Family LNKC1800-D.2 LNKC1800-D LNKC1800-D5 LNKC1800-D15 LNKC1800-U.2 LNKC1800-U LNKC1800-U5 LNKC1800-U15
Type Downlink 0.25 MHz Bandwidth Downlink 1.25 MHz Bandwidth Downlink 5 MHz Bandwidth Downlink 15 MHz Bandwidth Uplink 0.25 MHz Bandwidth Uplink 1.25 MHz Bandwidth Uplink 5 MHz Bandwidth Uplink 15 MHz Bandwidth
Frequency 1805-1880 MHz 1805-1880 MHz 1805-1880 MHz 1805-1880 MHz 1710-1785 MHz 1710-1785 MHz 1710-1785 MHz 1710-1785 MHz
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
213
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LNKF100
LNKF100
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 136 - 157, 155 - 174 NA NA Narrowband FM 12.5 or 25 KHz NA NA NA +37 dBm +20 dBm to +37 dBm +/- 1 dB NA NA NA -110 dBm to -30 dBml -110 dBm to -50 dBm 1 dB to 10 dB 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules NA NA Continuous -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules -57 dBm Maximum <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules 45 Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode, Receive, Transmit Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
Type 25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels NA NA NA NA
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
214
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
LNKF800
LNKF800
MODULE SPECIFICATIONS* Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options Continuous -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules -57 dBm Maximum <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules 45 Watts Maximum SMA (50 ) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode, Receive, Transmit Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection -110 dBm to -30 dBml -110 dBm to -50 dBm 1 dB to 10 dB 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules 806-824,851-869,896-901,935-940 NA NA Narrowband FM 12.5 or 25 KHz NA NA Tracks input signal exactly +38 dBm (+37 dBm for G2, H2 models) +17 dBm to +38 dBm (+37 dBm) +/- 1 dB
MECHANICAL SPECIFICATIONS* Dimensions HxWxD mm(ft) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE* FCC Type Acceptance IC Type Acceptance H6M-OFR800, H6M-LNKF800 1541195685A, 1541196848A
Type 25 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels 12.5 KHz FM channels 12.5 KHz FM channels 12.5 KHz FM channels NA NA
Frequency 806-824 MHz 851-869 MHz 806-824 MHz 851-869 MHz 896-901 MHz 935-940 MHz NA NA
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
215
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Page 217
216
POWERWAVE
Tap-In
1/2" Taps for Frequencies 100 MHz - 520 MHz Model Number Nominal Coupling Loss Insertion Loss & 150 MHz Line Input Power 5/8" Taps for Frequencies 100 MHz - 520 MHz Model Number Nominal Coupling Loss Insertion Loss & 150 MHz Line Input Power 1/2" Taps for Frequencies 300 MHz - 1000 MHz Model Number Nominal Coupling Loss Insertion Loss & 450 MHz Line Input Power 5/8" Taps for Frequencies 300 MHz - 1000 MHz Model Number Nominal Coupling Loss Insertion Loss & 450 MHz Line Input Power 1/2" Taps for Frequencies 800 MHz - 2000 MHz Model Number Nominal Coupling Loss Insertion Loss & 1.9 GHz Line Input Power 5/8" Taps for Frequencies 800 MHz - 2000 MHz Model Number Nominal Coupling Loss Insertion Loss & 1.9 GMHz Line Input Power TAP-IN GENERAL SPECIFICATIONS RF Output Impedance Dimensions, HxWxD (in) Output Connector Output Power (Maximum) EXACT TAP-IN DIAMETER MEASUREMENT Tap In Diameter in(mm) 1/2" Taps Tap In Diameter in(mm) 5/8" Taps 0.58 (14.73) 0.83 (21) 50 2 x 2 x 1.5 TNC Female 1W PCT7-12 12 dB 0.8 dB 15 W PCT7-16 16 dB 0.5 dB 45 W PCT5-12 12 dB 0.8 dB 15 W PCT5-16 16 dB 0.5 dB 45 W CCT7-12 12 dB 0.8 dB 15 W CCT7-16 16 dB 0.5 dB 45 W CCT7-20 20 dB 0.3 dB 90 W CCT5-12 12 dB 0.8 dB 15 W CCT5-16 16 dB 0.5 dB 45 W CCT5-20 20 dB 0.3 dB 90 W FCT7-12 12 dB 0.7 dB 15 W FCT7-16 16 dB 0.5 dB 15 W FCT7-20 20 dB 0.3 dB 15 W FCT5-12 12 dB 0.7 dB 15 W FCT5-16 16 dB 0.5 dB 15 W FCT5-20 20 dB 0.3 dB 15 W
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
217
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Title Nexus FT Single Band 700MHz for Public Safety (PS) and D block
Part Number
Page
RH700030/101
219
218
POWERWAVE
RH700030/101
Nexus FT Single Band 700MHz for Public Safety (PS) and D block
Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL60950-1 FCC CFR47 Parts 15,27,90 GR-36-CORE FCC CFR47 Part 15, 27 Power Per Carrier 40dBm 37dBm 34dBm 31dBm Composite Power 43dBm 43dBm 43dBm 43dBm NA NA NA NA NA NA NA NA NA NA -25C to +55C IP-65 (NEMA4) 465x530x195 (18 x 20.9 x 8.3) 23 kg (50.7 lbs) 7/16 DIN Female FC-APC PS: 788 to 805 MHz (includes upper D block) PS: 758 to 775 MHz (includes upper D block) 10 dBo 45 - 70 dB 35 - 60 dB 1dB 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz) 17 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 210 W typical, 250 W Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
219
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Title
Dimension_HxWXD_mm_(ft)
Door Upgrade, Wide Band 440 x 530 x 195 (15x19x8) Radio Head (WRH) Triple Band 900/1800/2100HP
220
POWERWAVE
RH004000/003
Door Upgrade, Wide Band Radio Head (WRH) single band 850MHz, for upgrade of single band 2W 1900MHz WRH base
ELECTRICAL DATA* Frequency UL Band 1 (MHz) Frequency DL Band 1 (MHz) Frequency UL Band 2 (MHz) Frequency DL Band 2 (MHz) Frequency UL Band 3 (MHz) Frequency DL Band 3 (MHz) Frequency UL Band 4 (MHz) Frequency DL Band 4 (MHz) Gain Adjustment Range Gain Step Resolution Max Absolute Delay Max Input Power in UL Output Power DL, band 1, 4 carrier Output Power DL, band 1, 8 carrier Output Power DL, band 1, 16 carrier Output Power DL, band 2, 4 carrier Output Power DL, band 2, 8 carrier Output Power DL, band 3, 4 carrier Output Power DL, band 3, 8 carrier Output Power DL, band 4, 4 carrier Output Power DL, band 4, 8 carrier Noise Figure (excluding fiber) Intermodulation band 1 Intermodulation band 2 Intermodulation band 3 Intermodulation band 4 MISCELLANEOUS SPECIFICATION* Alarm Power Supply Power Consumption MECHANICAL DATA* Dimension (HxWxD) mm(ft) Weight kg (lbs) RF Connection ENVIRONMENTAL DATA* Operating Temperature Celsius Housing Specification Ingression Protection APPROVALS AND TESTS* Safety Environment Regulatory Compliance EMC Regulatory Compliance Radio
*All specifications subject to change. Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)
N/A (base) N/A (base) 824-849 869-894 N/A N/A N/A N/A (1dBsteps), 30 dB 1 dB <300 ns +13 dBm damaging level N/A N/A N/A 4CDMA, 26dBm 8 CDMA, 23dBm N/A N/A N/A N/A 4 dB N/A N/A N/A N/A
440 x 530 x 195 (15x19x8) <22.5 (82) N-type female, duplexed service port,
EN 60950, ETL, ETS 300 019-2.4E EN301 489-1 FCC Part 24, 22
221
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH621010
ELECTRICAL DATA* Frequency UL Band 1 (MHz) Frequency DL Band 1 (MHz) Frequency UL Band 2 (MHz) Frequency DL Band 2 (MHz) Frequency UL Band 3 (MHz) Frequency DL Band 3 (MHz) Frequency UL Band 4 (MHz) Frequency DL Band 4 (MHz) Gain Adjustment Range Gain Step Resolution Max Absolute Delay Max Input Power in UL Output Power DL, band 1, 4 carrier Output Power DL, band 1, 8 carrier Output Power DL, band 2, 4 carrier Output Power DL, band 2, 8 carrier Output Power DL, band 3, 4 carrier Output Power DL, band 3, 8 carrier Output Power DL, band 4, 4 carrier Output Power DL, band 4, 8 carrier Noise Figure (excluding fiber) Intermodulation band 1 Intermodulation band 2 Intermodulation band 3 Intermodulation band 4 MISCELLANEOUS SPECIFICATION* Alarm Power Supply Power Consumption MECHANICAL DATA* Dimension (HxWxD) mm(ft) Weight kg (lbs) RF Connection ENVIRONMENTAL DATA* Operating Temperature Celsius Housing Specification Ingression Protection APPROVALS AND TESTS* Safety Environment Regulatory Compliance EMC Regulatory Compliance Radio
*All specifications subject to change. Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)
GSM 900, 890-915 GSM 900, 935-960 GSM 1800, 1710-1785 GSM1800, 1805-1880 UMTS, 1920-1980 UMTS 2110-2170 N/A N/A (1dBsteps), 30 dB 2 dB <300 ns +13 dBm damaging level 21dBm/carrier 18 dBm/carrier 23 dBm/carrier 20 dBm/carrier 30 dBm/carrier 27 dBm/carrier N/A N/A GSM900 4 dB, GSM1800 4 dB, UMTS2100 4.5 dB GSM 900, -36 dBm GSM 1800, -30 dBm N/A N/A
Fault, LED and by remote control 115/230 VAC or 24/48 VDC <425 W
EN 60950, ETL, ETS 300 019 EN301 489-1, TS125 113 ETS300 609-4, TS125 143
222
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Title Nexus FT Cover Upgrade 850 MHz Single Band Nexus FT Single Band EGSM900 Nexus FT Single Band EGSM900 Nexus FT Single Band DCS1800 Nexus FT Single Band DCS1800 Nexus FT Dual Band 1800/900 Nexus FT Dual Band 1800/900
Page 226
880-915 MHz
925-960 MHz
20 dB (45 65 dB)
RH100020/101
227
880-915 MHz
925-960 MHz
20 dB (45 65 dB)
RH100020/211
228
20 dB (45 65 dB)
RH200020/101
229
20 dB (45 65 dB)
RH200020/211
230
1710-1785, 880- 1805-1880, 92520 dB (45 65 dB) 915 MHz 960 MHz 1710-1785, 880- 1805-1880, 92520 dB (45 65 dB) 915 MHz 960 MHz 1930 - 1990 MHz 1930 - 1990 MHz 25 dB (45 70 dB)
RH201022/101
231
RH201022/211
232
Nexus FT 1900 MHz 1850 1910 MHz Single Band Nexus FT 1900 MHz 1850 1910 MHz Single Band Nexus FT Dual Band PCS/Cellular Nexus FT Dual Band PCS/Cellular
RH300020/101
233
25 dB (45 70 dB)
RH300020/211
234
1850-1910, 824- 1930-1990, 86925 dB (45 70 dB) 849 MHz 894 MHz 1850-1910, 824- 1930-1990, 86925 dB (45 70 dB) 849 MHz 894 MHz 25 dB (45 70 dB)
RH304022/101
235
RH304022/211
236
Nexus FT Dual Band 1850-1910, 1710- 1930-1990, PCS/AWS 1755 MHz 2110-2155 MHz Nexus FT Dual Band 1850-1910, 1710- 1930-1990, PCS/AWS 1755 MHz 2110-2155 MHz
RH309022/101
237
25 dB (45 70 dB)
RH309022/211
238
223
Coverage Products
POWERWAVE
Page 239
Nexus FT Dual Band 1850-1915, 824- 1930-1995, 869PCS/Cellular 849 MHz 894 MHz Including G-block Nexus FT 850 MHz Single Band Nexus FT 850 MHz Single Band Nexus FT Single Band 800iDEN Nexus FT Single Band 800iDEN & Public Safety Nexus FT Single Band 2100MHz UMTS Nexus FT Single Band 2100MHz UMTS 824 849 MHz 869 894 MHz
25 dB (45 70 dB)
RH334022/101
240
25 dB (45 70 dB)
RH400020/101
241
25 dB (45 70 dB)
RH400020/211
242
25 dB (45 70 dB)
RH500020/101
243
25 dB (45 70 dB)
RH500020/211
244
20 dB (45 65 dB)
RH600020/101
245
20 dB (45 65 dB)
RH600020/211
246
Nexus FT Dual Band 1920-1980, 880- 2110-2170, 925EGSM900 & 915 MHz 960 MHz WCDMA2100 Nexus FT Dual Band 1920-1980, 880- 2110-2170, 925EGSM900 & 915 MHz 960 MHz WCDMA2100 Nexus FT Dual Band 1920-1980, 2110-2170, 1805DCS1800 & 1710-1785 MHz 1880 MHz WCDMA2100 Nexus FT Single PS: 788 to 805 PS: 758 to 775 Band 700MHz for MHz (includes MHz (includes Public Safety (PS) upper D block) upper D block) and D block Nexus FT Dual Band 788 to 805 MHz 758 to 775 MHz 700MHz for Public (includes upper (includes upper D Safety (PS) and D D block), 806 - block), 851 - 869 block /800iDEN 824 MHz MHz
20 dB (45 65 dB)
RH601022/101
247
20 dB (45 65 dB)
RH601022/211
248
20 dB (45 65 dB)
RH602022/101
249
45 - 70 dB
RH700030/101
250
25 dB (45 70 dB)
RH705032/101
251
224
Coverage Products
POWERWAVE
Part Number
Page
RH770020/101
252
RH777722/251
253
RH805022/101
254
RH805022/211
255
RH900020/101
256
1710-1755 MHz
2110-2155 MHz
25 dB (45 70 dB)
RH900020/211
257
1710-1755 MHz
2110-2155 MHz
25 dB (45 70 dB)
RH909022/251
258
225
POWERWAVE
RH004002/001
Cover Upgrade Configuration - AC powered, with one duplexed 7/16 DIN connector RF service port and coax RF donor port. ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count 2 4 8 16 UL, EN 60950, ETL FCC CFR 47 part 22 ETS 300 019 EN 301 489 Power Per Carrier FCC 40 37 34 31 Composite Power FCC 43 43 43 43 Power Per Carrier ETSI 29 29 29 28 Composite Power ETSI 32 35 38 40 -25 C to +55 C IP65 / NEM A 4 465 x 530 x 156 (18 x 20.9 x 6.1) < 22 kg (48 lbs) 7/16 DIN female FC/APC 824 - 849 MHz 869 - 894 MHz 10 dBo 25 dB (45 - 70 dB) 25 dB (35 - 60 dB) 1 dB Maximum Composite Power 43 dBm Full Band <-13 dBm (FCC) <-13 dBm (FCC) LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
226
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH100020/101
RH100020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 UL, EN 60950, ETL ETS 300 609-4, TS 25.143 , TS 36.143 ETS 300 019 EN 301 489 EGSM900 Power Per Carrier 29dBm 29dBm 29dBm 28dBm Composite Power 32dBm 35dBm 38dBm 40dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC 880-915 MHz 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) 35 MHz, EVM<7% , PCDE< -47dB, ACCR> 49dB[HSDPA+], EVM<7% , ACCR>48dB[LTE] <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
227
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH100020/211
RH100020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 UL, EN 60950, ETL ETS 300 609-4 ETS 300 019 EN 301 489 EGSM900 Power Per Carrier 29dBm 29dBm 29dBm 28dBm Composite Power 32dBm 35dBm 38dBm 40dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC 880-915 MHz 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE) 35 MHz <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
228
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH200020/101
RH200020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 UL, EN 60950, ETL ETS 300 609-4, TS 25.143 , TS 36.143 ETS 300 019 EN 301 489 DCS1800 Power Per Carrier 35dBm 34dBm 31dBm 28dBm Composite Power 38dBm 40dBm 40dBm 40dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC 1710-1785 MHz 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) 75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE] <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
229
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH200020/211
RH200020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 UL, EN 60950, ETL ETS 300 609-4 ETS 300 019 EN 301 489 DCS1800 Power Per Carrier 35dBm 34dBm 31dBm 28dBm Composite Power 38dBm 40dBm 40dBm 40dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC 1710-1785 MHz 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) 75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE] <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
230
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH201022/101
RH201022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 NA UL, EN 60950, ETL ETSI EN 300 609-4 ETS 300 019 -2.4E ETS 300 489-1 EGSM900 Power Per Carrier 29dBm 29dBm 29dBm 28dBm NA EGSM900 Composite Power 32dBm 35dBm 38dBm 40dBm NA DCS1800 Power Per Carrier 35dBm 34dBm 31dBm 28dBm DCS1800 Composite Power 38dBm 40dBm 40dBm 40dBm -25 C to +55 C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1710-1785, 880-915 MHz 1805-1880, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for 1800MHz GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) Maximum Composite Power +40dBm applicable for 900MHz GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
231
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH201022/211
RH201022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 NA UL, EN 60950, ETL ETSI EN 300 609-4 ETS 300 019 -2.4E ETS 300 489-1 EGSM900 Power Per Carrier 29dBm 29dBm 29dBm 28dBm NA EGSM900 Composite Power 32dBm 35dBm 38dBm 40dBm NA DCS1800 Power Per Carrier 35dBm 34dBm 31dBm 28dBm DCS1800 Composite Power 38dBm 40dBm 40dBm 40dBm -25 C to +55 C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1710-1785, 880-915 MHz 1805-1880, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for 1800MHz GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) Maximum Composite Power +40dBm applicable for 900MHz GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
232
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH300020/101
RH300020/101 is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 Power Per Carrier FCC 40dBm 37dBm 34dBm 31dBm Composite Power FCC 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA UL, EN 60950, ETL FCC CFR 47 Part 15 and 24 -25 C to +55 C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1850 1910 MHz 1930 - 1990 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
233
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH300020/211
RH300020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 Power Per Carrier FCC 40dBm 37dBm 34dBm 31dBm Composite Power FCC 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA UL, EN 60950, ETL FCC CFR 47 Part 15 and 24 -25 C to +55 C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1850 1910 MHz 1930 - 1990 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
234
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH304022/101
RH304022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 24, FCC part 22 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1850-1910, 824-849 MHz 1930-1990, 869-894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (800 MHz, Downlink , Composite) 65MHz (PCS), 25MHz (Cellular) <-13dBm <-13dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
235
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH304022/211
RH304022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 24, FCC part 22 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm NA Power Per Carrier NA NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1850-1910, 824-849 MHz 1930-1990, 869-894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (800 MHz, Downlink , Composite) NA NA NA LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
236
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH309022/101
RH309022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 24, FCC part 27 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm NA Power Per Carrier NA NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1850-1910, 1710-1755 MHz 1930-1990, 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (2100 MHz, Downlink , Composite)* NA NA NA LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
237
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH309022/211
RH309022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 24, FCC part 27 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm NA Power Per Carrier NA NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1850-1910, 1710-1755 MHz 1930-1990, 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (2100 MHz, Downlink , Composite)* NA NA NA LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
238
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH330020/101
RH330020/101 is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 Power Per Carrier FCC 40dBm 37dBm 34dBm 31dBm Composite Power FCC 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA UL, EN 60950, ETL FCC CFR 47 Part 15 and 24 -25 C to +55 C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1850 1915 MHz 1930 - 1995 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm 65MHz <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
239
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH334022/101
RH334022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 24, FCC part 22 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1850-1915, 824-849 MHz 1930-1995, 869-894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (800 MHz, Downlink , Composite) 65MHz (PCS), 25MHz (Cellular) <-13dBm <-13dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
240
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH400020/101
RH400020/101 is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 Power Per Carrier FCC 40dBm 37dBm 34dBm 31dBm Composite Power FCC 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI 29dBm 29dBm 29dBm 28dBm Composite Power ETSI 32dBm 35dBm 38dBm 40dBm UL, EN 60950, ETL FCC CFR 47 Part 22 -25 C to +55 C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 824 849 MHz 869 894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
241
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH400020/211
RH400020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 Power Per Carrier FCC 40dBm 37dBm 34dBm 31dBm Composite Power FCC 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI 29dBm 29dBm 29dBm 28dBm Composite Power ETSI 32dBm 35dBm 38dBm 40dBm UL, EN 60950, ETL FCC CFR 47 Part 22 -25 C to +55 C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 824 849 MHz 869 894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
242
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH500020/101
RH500020/101 is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 Power Per Carrier 40dBm 37dBm 34dBm 32dBm UL, EN 60950, ETL FCC CFR 47 Part 15, Part 90 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 806 824 MHz 851 869 MHz 10 dBo 25 dB (45 70 dB) 25 dB (45 70 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
243
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH500020/211
RH500020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 Power Per Carrier 40dBm 37dBm 34dBm 32dBm UL, EN 60950, ETL FCC CFR 47 Part 15, Part 90 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 806 824 MHz 851 869 MHz 10 dBo 25 dB (45 70 dB) 25 dB (45 70 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
244
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH600020/101
RH600020/101 is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL, EN 60950, ETL ESTI EN 301 908-11 ETS 300 019 ETS 300 489-1 Power Per Carrier 40dBm 37dBm 34dBm 32dBm Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1920-1980 MHz 2110-2170 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power +43dBm* 60 MHz <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
245
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH600020/211
RH600020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL, EN 60950, ETL ESTI EN 301 908-11 ETS 300 019 ETS 300 489-1 Power Per Carrier 40dBm 37dBm 34dBm 32dBm Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1920-1980 MHz 2110-2170 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power +43dBm* 60 MHz <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
246
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH601022/101
RH601022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 NA UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 -2.4E ETS 300 489-1 EGSM900 Power Per Carrier 29dBm 29dBm 29dBm 28dBm NA EGSM900 Composite Power 32dBm 35dBm 38dBm 40dBm NA WCDMAS 2100 Power Per Carrier 40dBm 37dBm 34dBm NA WCDMAS 2100 Composite Power 43dBm 43dBm 43dBm NA -25 C to +55 C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1920-1980, 880-915 MHz 2110-2170, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power 2100 MHz UMTS +43dBm* Maximum Composite Power +40dBm applicable for 900 MHz GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
247
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH601022/211
RH601022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 16 NA UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 -2.4E ETS 300 489-1 EGSM900 Power Per Carrier 29dBm 29dBm 29dBm 28dBm NA EGSM900 Composite Power 32dBm 35dBm 38dBm 40dBm WCDMAS 2100 Power Per Carrier 40dBm 37dBm 34dBm WCDMAS 2100 Composite Power 43dBm 43dBm 43dBm NA -25 C to +55 C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1920-1980, 880-915 MHz 2110-2170, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power WCDMA2100 +43dBm* Maximum composite power EGSM900 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
248
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH602022/101
RH602022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 ETS 300 489-1 DCS1800 Power Per Carrier 35dBm 34dBm 31dBm 29dBm DCS1800 Composite Power 38dBm 40dBm 40dBm 40dBm WCDMA 2100 Power Per Carrier 40dBm 37dBm 34dBm 32dBm WCDMA 2100 Composite Power 43dBm 43dBm 43dBm 43dBm -25 C to +55 C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1920-1980, 1710-1785 MHz 2110-2170, 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power 2100 MHz UMTS +43dBm* Maximum Composite Power +40dBm applicable for 1800 MHz GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
249
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH700030/101
Nexus FT Single Band 700MHz for Public Safety (PS) and D block
Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL60950-1 FCC CFR47 Parts 15,27,90 GR-36-CORE FCC CFR47 Part 15, 27 Power Per Carrier 40dBm 37dBm 34dBm 31dBm Composite Power 43dBm 43dBm 43dBm 43dBm NA NA NA NA NA NA NA NA NA NA -25C to +55C IP-65 (NEMA4) 465x530x195 (18 x 20.9 x 8.3) 23 kg (50.7 lbs) 7/16 DIN Female FC-APC PS: 788 to 805 MHz (includes upper D block) PS: 758 to 775 MHz (includes upper D block) 10 dBo 45 - 70 dB 35 - 60 dB 1dB 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz) 17 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 210 W typical, 250 W Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
250
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH705032/101
Nexus FT Dual Band 700MHz for Public Safety (PS) and D block /800iDEN
RH705032/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 15, FCC part 90 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm NA Power Per Carrier NA NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 788 to 805 MHz (includes upper D block), 806 - 824 MHz 758 to 775 MHz (includes upper D block), 851 - 869 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz) +43 dBm (iDEN800, Downlink , Quad BR) 17MHZ (700 PS) NA NA LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
251
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH770020/101
Nexus FT 700 MHz LTE 20W, AC Pwr,WDM Fiber donor port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL60950-1 FCC CFR47 Parts 15,27,90 GR-36-CORE FCC CFR47 Part 15, 27 Power Per Carrier 40dBm 37dBm 34dBm 31dBm Composite Power 43dBm 43dBm 43dBm 43dBm NA NA NA NA NA NA NA NA NA NA -25C to +55C IP-65 (NEMA4) 465x530x195 (18 x 20.9 x 8.3) 23 kg (50.7 lbs) 7/16 DIN Female FC-APC lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz) A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz) 10 dBo 45 - 70 dB 35 - 60 dB 1dB 43 dBm Upper Band 11 MHz, lower Band 18 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 210 W typical, 250 W Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
252
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH777722/251
RH777722/251 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 31dBm NA FCC CFR47 Part 15, 27,90 Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier NA NA NA Composite Power NA NA NA NA UL, EN 60950, ETL FCC CFR47 Parts 15,27,90 - 25C to + 55C IP65 / NEMA 4 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz) A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz) 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (700 MHz, Downlink , Composite Channel A) +43 dBm (700 MHz, Downlink , Composite Channel B) Upper Band 11 MHz, lower Band 18 MHz <-13dBm <-13dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
253
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH805022/101
RH805022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 15, FCC part 90 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm NA Power Per Carrier NA NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 806-824, 896-902 MHz 851-869, 935-941 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
254
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH805022/211
RH805022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 32dBm NA UL, EN 60950, ETL FCC Part 15, FCC part 90 ETS 300 019 -2.4E ETS 300 489-1 Composite Power 43dBm 43dBm 43dBm 43dBm NA Power Per Carrier NA NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC 806-824, 896-902 MHz 851-869, 935-941 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
255
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH900020/101
RH900020/101 is AC powered, with one duplexed 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL, EN 60950, ETL FCC Part 27 ETS 300 019 ETS 300 489-1 Power Per Carrier 40dBm 37dBm 34dBm 32dBm Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1710-1755 MHz 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum composite power +43dBm* 45 MHz <-13 dBm NA LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
256
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH900020/211
RH900020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC *Carrier Count 2 4 8 12 UL, EN 60950, ETL FCC Part 27 ETS 300 019 ETS 300 489-1 Power Per Carrier 40dBm 37dBm 34dBm 32dBm Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier ETSI NA NA NA NA Composite Power ETSI NA NA NA NA - 25C to + 55C IP65/NEMA4 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC 1710-1755 MHz 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum composite power +43dBm* 45 MHz <-13 dBm NA LED and by remote control 115/230 VAC 210 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated:
257
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH909022/251
RH909022/251 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count * 2 4 8 12 NA Power Per Carrier 40dBm 37dBm 34dBm 31dBm NA UL, EN 60950, ETL FCC CFR47 Parts 15,27,90 ETD300 489-1 FCC CFR47 Part 15, 27,90 Composite Power 43dBm 43dBm 43dBm 43dBm Power Per Carrier NA NA NA Composite Power NA NA NA NA - 25C to + 55C IP65 / NEMA 4 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC 1710-1755 MHz 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm ( Downlink , Composite Channel A) +43 dBm (Downlink , Composite Channel B) 45 MHz <-13dBm <-13dBm LED and by remote control 115/230 VAC 420 W Typical
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
258
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Title Nexus Dual Band Repeaters Nexus Dual Band Repeaters Nexus Dual Band Repeaters
Page 260
25 (45 - 70) dB
RH305022/03A
261
25 (45 - 70) dB
RH308022/03A
262
259
POWERWAVE
RH304022/03A
Nexus FT Rack Mount Dual Band 1900 / 850, Simplex SMA donor ports and duplexed N service ports per band. ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count 2 4 8 12 UL60950-1 FCC CFR47 Parts 22, 24 ETS 300 019 FCC CFR47 Part 22, 24 Power Per Carrier 40 dBm 37 dBm 34 dBm 32 dBm Composite Power 43 dBm 43 dBm 43 dBm 43 dBm 0C to +55C IP50 266 x 483 x 551 (10.5 x 19 x 21.7) 30 (66) SMA (Donor), N (Service) n/a -units require ORD for optical to RF conversion 1850-1910, 824-849 MHz 1930-1990, 869-894 MHz n/a 25 (45 - 70) dB 25 (35 - 60) dB 1 dB 20 W 20 W 60 / 25 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 420 W typical, 500 W Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
260
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH305022/03A
Nexus FT Rack Mount Dual Band 1900 / 800iPS, Simplex SMA donor ports and duplexed N service ports per band. ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count 2 4 8 12 UL60950-1 FCC CFR47 Parts 24, 90 ETS 300 019 FCC CFR47 Parts 24, 90 Power Per Carrier 40 dBm 37 dBm 34 dBm 32 dBm Composite Power 43 dBm 43 dBm 43 dBm 43 dBm 0 to +55C IP50 266 x 483 x 551 (10.5 x 19 x 21.7) 30 (66) SMA (Donor), N (Service) n/a -units require ORD for optical to RF conversion 1850-1910, 806-824 MHz 1930-1990, 851-869 MHz n/a 25 (45 - 70) dB 25 (35 - 60) dB 1 dB 20 W 20 W 60 / 18 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 420 W typical, 500 W Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
261
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
RH308022/03A
Nexus FT Rack Mount Dual Band 1900 / 900i, Simplex SMA donor ports and duplexed N service ports per band. ELECTRICAL SPECIFICATIONS Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Weight kg(lbs) RF Connectors Optical Connectors ENVIRONMENTAL SPECIFICATIONS Temperature Range Ingression Protection APPROVALS AND TESTS Safety Radio Environment EMC Carrier Count 2 4 8 12 UL60950-1 FCC CFR47 Parts 24, 90 ETS 300 019 FCC CFR47 Parts 24, 90 Power Per Carrier 40 dBm 37 dBm 34 dBm 32 dBm Composite Power 43 dBm 43 dBm 43 dBm 43 dBm 0 to +55 IP50 266 x 483 x 551 (10.5 x 19 x 21.7) 30 (66) SMA (Donor), N (Service) n/a -units require ORD for optical to RF conversion 1850-1910, 896-902 MHz 1930-1990, 935-941 MHz n/a 25 (45 - 70) dB 25 (35 - 60) dB 1 dB 20 W 20 W 60 / 6 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 420 W typical, 500 W Max
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
262
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Power wave
Powerwaves IP/SNML/GPS (ISG) communication interface module provides remote operation, control and monitoring of Powerwaves repeater networks reducing the need for site visits through a very cost-effective and reliable IP and SNMP connection. The ISG interface modules improve the repeaters remote access offering Ethernet and packet switched connections and a Web craft terminal. The ISG interface can manage numerous repeaters and when integrated with Powerwaves NetWay Vision, offers a complete solution for network management.
Coverage Products
POWERWAVE
Title Base Station Management Interface IP/SNMP/GPS: Ethernet Interface Upgrade Option
N/A
UA107 62/1
267
IP/SNMP/GPS: 12 channel L1 (1575.42 900/1800 Dual Mode +/- 6.5 VDC @ 2A 900 / 1800 MHz MHz), position accuracy ~ UA107 62/2 Wireless GPRS (supplied by repeater) 5m Packet Data Interface IP/SNMP/GPS: 12 channel L1 (1575.42 850/1900 Dual Mode +/- 6.5 VDC @ 2A 850 / 1900 MHz MHz), position accuracy ~ UA107 62/3 Wireless CDMA (supplied by repeater) 5m Packet Data Interface IP/SNMP/GPS: 12 channel L1 (1575.42 850/1900 Dual Mode +/- 6.5 VDC @ 2A 850 / 1900 MHz MHz), position accuracy ~ UA107 62/4 (supplied by repeater) Wireless GPRS 5m Packet Data Interface
268
269
270
264
Coverage Solutions
The Base Station Management Interface (BSMI) is multi-band power limiter and monitor. It is a component of head-end fiber distributed antenna system (DAS) systems, and provides the interface and level management of the DAS donor RF signals. The BSMI is typically used with the Powerwave Fiber Base Unit (FBU) which converts optical to RF signals.
Features:
q
Provides downlink load balancing and power limiting for DAS (distributed antenna systems) with multi-base station or multioperator configurations Technology agnostic - can be used to support all commercial 2G/3G/4G technologies Each module supports 4 independent uplink and downlink paths Two paths UL/DL(uplink and downlink) are dedicated for 698MHz-1GHz and two paths are dedicated for 1700-2200 MHz Both UL and DL paths can be adjusted from 0-15dB in 1dB steps IP42 rated with -10C to +45C operating range Maximum DL RF input is +40dBm and maximum uplink input is 0 dBm Two Ethernet interfaces support local and remote access Supports SNMP traps and is fully supported with Netway Vision Level adjustments can be made locally or remotely-reducing site trips
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
265
Coverage Solutions
MECHANICAL SPECIFICATIONS
Form Factor Maximum Dimensions (Including connector Protrusions) Dimensions, HxWxD, mm (in) Weight, with brackets, kg (lbs) Operating Temperature Maximum Power Dissipation Packing weight, kg (lbs) 1 Rack Unit Bottom 482.6x419.4x43.7mm(19.0x16.51x1.7) 2.3 (5.0) -10 to +50C 40 Watts 27.3 (60.0)
REGULATORY APPROVALS
EMI FCC Part 15, Class B FCC Part 22,24,90 EN60000-6-3 (Radiated Up to 10 GHz EN55022 EMC IEC 6100-4-2,3,4,6 IEC 60950-1
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
266
POWERWAVE
UA107 62/1
Optional kit that provides wired Ethernet packet data interface for communication with Powerwaves Netway Vision (NWV) ELECTRICAL SPECIFICATIONS Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications PROCESSING Automated Location Based Tuning (via GPS) Repeater Management NA Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information. 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication ports NA ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15) +6.5 VDC @ 2A (supplied by Repeater) NA NA 10 minute minimum (for communications) Continuous trickle or high charge
COMMUNICATIONS Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) IP Ethernet NA NA SNMP v1, v2c and http NA NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs). All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
267
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
UA107 62/2
Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves NetWay Vision (NWV) and automated location tuning via GPS for moving repeaters ELECTRICAL SPECIFICATIONS Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications PROCESSING Automated Location Based Tuning (via GPS) Repeater Management Up to 12 Repeaters Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information. 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication and antenna ports Mezzanine Board ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007) +6.5 VDC @ 2A (supplied by Repeater) 900 / 1800 MHz 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m 10 minute minimum (for communications) Continuous trickle or high charge
COMMUNICATIONS Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) GPRS and IP Ethernet NA GSM SNMP v1, v2c and http Wavecom Quik series Extended (Q24 EX001) NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs). All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
268
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
UA107 62/3
Optional kit that provides CDMA wireless packet data interface for communication with Powerwaves NetWay Vision (NWV) ELECTRICAL SPECIFICATIONS Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications PROCESSING Automated Location Based Tuning (via GPS) Repeater Management Up to 12 Repeaters Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information. 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication and antenna ports Mezzanine Board ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15) +6.5 VDC @ 2A (supplied by Repeater) 850 / 1900 MHz 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m 10 minute minimum (for communications) Continuous trickle or high charge
COMMUNICATIONS Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) CDMA2000 1XRTT and IP ethernet Verizon NA SNMP v1, v2c and http Wavecom Quik series (Q2438) NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs). All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
269
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
UA107 62/4
Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves Netway Vision (NWV) ELECTRICAL SPECIFICATIONS Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options MECHANICAL SPECIFICATIONS Dimensions HxWxD mm(in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications PROCESSING Automated Location Based Tuning (via GPS) Repeater Management Up to 12 Repeaters Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information. 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication and antenna ports Mezzanine Board ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15) +6.5 VDC @ 2A (supplied by Repeater) 850 / 1900 MHz 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m 10 minute minimum (for communications) Continuous trickle or high charge
COMMUNICATIONS Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) GPRS and IP Ethernet NA GSM SNMP v1, v2c and http Wavecom Quik series Extended (Q24 EX001) NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs). All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
270
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Antenna Products
Power wave
Broadband Single and Dual Band iRET iDiplexer Remote Electrical Tilt (RET) Indoor Clean Site Solutions Mounting Solutions
State of the Art Antennas are the Key to Reducing Total Cost of Ownership
The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G and 4G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.
Broadband Antennas
Power wave
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide voltage standing wave ratio (VSWR) bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with remote electrical tilt (RET) in AISG 1.1 and AISG 2.0, and manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Broadband Antennas
POWERWAVE
Broadband Antennas
Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz Low Broadband Cross Polarized Antennas, 806-960 MHz Low Broadband Cross Polarized Antennas, 698-894 MHz Dual Broadband Antennas Cross Polarized Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz Page 368 375 Page 351 361 Page 274 305 343
273
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
Gain dBi dBd 18.1/16 18.1/16 18.1/16 18.1/16.2 18.1/16 19.5/17.4 15.8/13.7 15.8/13.7 18.1/16 18.1/16 18.1/16 18.1/16 18.1/16 15.6/13.5 18.3/16.2 18.3/16.2 18.1/16 18.1/16 18/15.9 18.1/16 18.3/16.2
Tilt
0 2 6 0-8 2-10 0.5-5 0 6 0 0 2 2 6 0-16 0-8 0-8 2-10 2-10 6-14 2-10 0-8
Length 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (66) 0.7m (23) 0.7m (23) 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 0.7m (23) 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3")
Part Number 5701.00 5701.02 5701.06 5721.00 5721.02 5722.00 7700.00 7700.06 7701.00 7701.00A 7701.02 7701.02A 7701.06 7720.00 7721.00 7721.00A 7721.02 7721.02A 7721.06 7721.10 7721.40
Page 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296
274
POWERWAVE
Horizontal Beamwidth 65 65 90 90 90 90 65 65
Length 2.0m (66) 2.0m (66) 0.7m (23) 1.3m (43) 0.7m (23) 2.0m (66) 1.3m (43) 1.3m (43)
Part Number 7722.00 7722.00A 7735.00A 5740.00 7740.00A 7745.00A 5760.00 5760.02
275
POWERWAVE
5701.00
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.2/16.1 TILT: 0 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20, typical>-18 0.5 >30 >27 >17 >17 <-150 67 7.2 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.7 0 >20 >30 <1.0 >-20, typical>-18 0.5 >30 >27 >17 >14 <-150 250 500 >20 >30 <1.0 >-20, typical>-18 0.5 >30 >27 >20 >11 <-160 64 6.4 1920-2170 18.2/16.1
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIM Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
276
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5701.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16 TILT: 2 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >17 <-150 67 7.2 1710-1880 17.4/15.3 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.7 2 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >14 <-150 250 500 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >20 >11 <-160 64 6.4 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
277
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5701.06
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16 TILT: 6 LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-26,typical>-20 <0.5 >29 >25 >17 >17 <-150 67 7.2 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 65 6.7 6 >18 >30 <1.0 >-26,typical>-20 <0.5 >29 >25 >17 >14 <-150 250 500 >18 >30 <1.0 >-26,typical>-20 <0.5 >29 >25 >20 >11 <-160 64 6.4 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
278
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5721.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >17 >18 <-150 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual Linear 45 50 <1.4:1 66 6.6 0-8 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >17 >14 <-150 250 500 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5(43x6x3) Pre Mounted Standard Brackets 9.7 (21.3) 6.0 (13.2) 281 42 (93) 56 (123) DC Grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
279
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5721.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-150 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >19 >14 <-150 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
280
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5722.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 19.5/17.4 TILT: 0-5.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >20 <-150 67 4.7 1710-1880 19/16.9 1710-2170 1850-1990 19.2/17.1 Dual Slant 45 50 <1.4:1 66 4.4 0 - 5.5 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >17 <-150 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >21 >12 <-160 65 4.2 1920-2170 19.5/17.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre mounted standard brackets 14 (31) 8.5 (18.7) 416 42 (93) 55 (123) DC Grounded -40C to +60C PVC Light Grey 2105x200x200 (611x8x8) 15.5 (34.1) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
281
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7700.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.8/13.7 TILT: 0 LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >17 >17 <-153 67 14.7 1710-1880 15.1/13.0 1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.4:1 66 13.8 0 >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >19 >15 <-153 250 500 >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >19 >11 <-160 64 12.8 1920-2170 15.8/13.7
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 6.7 (14.8) 3 (6.6) 133 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 880x200x200 (211x 8x 8) 10 (22) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
282
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7700.06
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.8/13.7 TILT: 6 LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >17 >17 <-153 67 14.7 1710-1880 15.0/12.9 1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.4:1 65 13.8 6 >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >19 >15 <-153 250 500 >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >19 >11 <-160 64 12.8 1920-2170 15.8/13.7
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 6.7 (14.8) 3 (6.6) 133 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 880x200x200 (211x 8x 8) 10 (22) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
283
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7701.00
POLARIZATION: X-pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.2/16.1 TILT: 0 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >17 >17 <-153 67 7.2 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.7 0 >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >19 >14 <-153 250 500 >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >20 >11 <-160 64 6.4 1920-2170 18.2/16.1
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
284
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7701.00A
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.2/16.1 TILT: 0 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20, typical>-18 0.5 >30 >27 >17 >17 <-150 67 7.2 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.7 0 >20 >30 <1.0 >-20, typical>-18 0.5 >30 >27 >17 >14 <-150 250 500 >20 >30 <1.0 >-20, typical>-18 0.5 >30 >27 >20 >11 <-160 64 6.4 1920-2170 18.2/16.1
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIM Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
285
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7701.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16 TILT: 2 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >17 <-153 67 7.2 1710-1880 17.4/15.3 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.7 2 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >19 >14 <-153 250 500 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >20 >11 <-160 64 6.4 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
286
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7701.02A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16 TILT: 2 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >17 <-150 67 7.2 1710-1880 17.4/15.3 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.7 2 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >14 <-150 250 500 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >20 >11 <-160 64 6.4 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to+60C PVC Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
287
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7701.06
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16.0 TILT: 6 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >17 >17 <-153 67 7.2 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 65 6.7 6 >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >19 >14 <-153 250 500 >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >20 >11 <-160 64 6.4 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
288
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7720.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.6/13.5 TILT: 0-16 LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >15 >15 <-153 67 14.1 1710-1880 15.0/12.9 1710-2170 1850-1990 15.1/13.0 Dual linear 45 50 <1.4:1 65 13.5 0-16 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >18 >15 <-153 250 500 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >18 >13 <-160 64 12.5 1920-2170 15.6/13.5
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 8.2 (18) 4.5 (9.9) 133 42 (93) 56 (123) DC grounded -40C to +60C ASA Light Grey 880x200x200 (211x8x8) 11.5 (25.3) 8110.40, 8110.10 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
289
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-8 >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >19 >14 <-153 250 500 >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6.0 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.40, 8110.10 7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
290
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >17 >18 <-150 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual Linear 45 50 <1.4:1 66 6.6 0-8 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >17 >14 <-150 250 500 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5(43x6x3) Pre Mounted Standard Brackets 9.7 (21.3) 6.0 (13.2) 281 42 (93) 55 (123) DC Grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
291
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.02
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >19 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
292
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.02A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-150 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >19 >14 <-150 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
293
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.06
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9 TILT: 6-14 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.3 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.9 6-14 >20,20,20,19,18@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >19 >14 <-153 250 500 >20,20,20,19,18@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.6 1920-2170 18.0/15.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.40, 8110.10 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
294
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.10
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >19 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) No pre-mounted bracket. 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.40, 8110.10 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
295
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7721.40
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W)
This is the connectur up version of 7721.00
1710-2170 1710-1880 17.6/15.5 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 67 7.0 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 66 6.6 0-8 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Top 1309x167x89.5 mm (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10,8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
296
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7722.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 19.5/17.4 TILT: 0-5.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >20 <-153 67 4.7 1710-1880 19.0/16.9 1710-2170 1850-1990 19.2/17.1 Dual slant 45 50 <1.4:1 66 4.4 0-5.5 >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >20 >17 <-153 250 500 >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >21 >12 <-160 65 4.2 1920-2170 19.5/17.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre-mounted standard brackets 14 (31) 8.5 (18.7) 416 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2105x200x200 (611x8x8) 15.5 (34.1) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
297
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7722.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 19.5/17.4 TILT: 0-5.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >20 <-150 67 4.7 1710-1880 19/16.9 1710-2170 1850-1990 19.2/17.1 Dual Slant 45 50 <1.4:1 66 4.4 0 - 5.5 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >17 <-150 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >21 >12 <-160 65 4.2 1920-2170 19.5/17.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre mounted standard brackets 14 (31) 8.5 (18.7) 416 42 (93) 55 (123) DC Grounded -40C to +60C PVC Light Grey 2105x200x200 (611x8x8) 15.5 (34.1) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
298
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7735.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 14.1/12.0 TILT: 0-16 LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >13 >10 -153 86 14.7 1710-1880 13.6/11.5 1710-2170 1850-1990 13.8/11.7 Dual linear 45 50 <1.4:1 86 13.4 0-16 >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >13 >10 -153 250 500 >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >12 >10 <-160 87 12.2 1920-2170 14.1/12.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 133 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 880x200x200 (211x8x8) 13 (28.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
299
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5740.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.7/14.6 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-150 86 7.1 1710-1880 16.2/14.1 1710-2170 1850-1990 16.4/14.3 Dual linear 45 50 <1.4:1 86 6.6 0-8 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-150 250 500 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >12 >10 <-160 86 6.3 1920-2170 16.7/14.6
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 11.7 (25.7) 8 (17.6) 281 42 (93) 56 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 15.5 (34.1) 8110.10, 8110.40 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
300
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7740.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.7/14.6 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-150 86 7.1 1710-1880 16.2/14.1 1710-2170 1850-1990 16.4/14.3 Dual linear 45 50 <1.4:1 86 6.6 0-8 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >13 >10 <-150 250 500 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >12 >10 <-160 86 6.3 1920-2170 16.7/14.6
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 11.7 (25.7) 8 (17.6) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 15.5 (34.1) 8110.40. 8110.10 7256.00A,7454.00,7455.00,7488.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
301
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7745.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 17.9/15.8 TILT: 0-5.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >14 >10 <-153 86 4.7 1710-1880 17.5/15.4 1710-2170 1850-1990 17.6/15.5 Dual linear 45 50 <1.4:1 86 4.5 0-5.5 >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >13 >10 <-153 250 500 >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >12 >10 <-160 86 4.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre-mounted standard brackets 15.9 (35) 10.4 (22.9) 416 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2105x200x200 (611x8x8) 18 (39.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
302
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5760.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >16 <-150 65 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-8 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-150 250 1000 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 64 6.2 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 70 (156) DC grounded -40C to +60C PVC Light Grey 1430x430x250 (48x13x9) 23.5 (51.8) 8110.10, 8110.40 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
303
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5760.02
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 2-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-150 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 2-10 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-150 250 1000 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 63 6.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 70 (156) DC grounded -40C to +60C PVC Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
304
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth Gain dBi dBd 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 90 90 90 90 90 90 90 90 14.6/12.5, 15.0/12.9 17.1/15.0, 17.5/15.4 17.7/15.6, 18.5/46.4 16.5/14.4, 17.0/14.9 17.4/15.3, 18.1/16.0 17.4/15.2, 18.0/15.8 14.5/12, 15/12.9 14.6/12.5, 15.1/13 14.6/12.5, 15.1/13 15.6/13.5, 16.2/14.1 15.6/13.5, 16.2/14.1 16.9/14.8, 17.3/15.2 16/13.9, 16.5/14.4 17.7/15.6, 18.5/46.4 16/13.9, 16.5/14.4 17/14.9, 17.4/15.3 17/14.9, 17.4/15.3 17.7/15.6, 18.5/46.4 17.2/15.1, 17.5/15.4 18.5/16.4 13.6/11.5, 14/11.9 14.8/12.7, 15.4/13.3 14.8/12.7, 15.5/13.4 15.8/13.7, 16.3/14.2 15.8/13.7, 16.3/14.2 16.6/14.5, 17.1/15.0 15.9/13.8, 16.3/14.2 16.6/14.5, 17.0/14.9
Tilt 2-12 0-7.5 0-0.5 0 0 6 0 2 6 0 2 0 0-7.5 0-0.5 6 2 6 0 0-5.5 0-0.5 6 0 0-7.5 0 2 0 0-0.5 0-0.5
Length 1.3m (4'3") 2.0m (6'6") 2.6m (8'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 1.4m (4'7") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")
Part Number P65-15-XD-N 5472.00 5473.00 5477.00 5478.00 5478.06 7476.00 7476.02 7476.06 7477.00 7477.02 7478.00 7472.00 7472.00A 7477.06 7478.02 7478.06 7478.00A 7473.00 7473.00A 7486.06 7487.00 7482.00 7488.00 7488.02 7488.00A 7483.00 7483.00A
Page 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334
305
POWERWAVE
Horizontal Beamwidth Gain dBi dBd 90 90 90 90 90 90 90 90 15.9/13.8, 16.4/14.3 15/12.9, 15.5/13.4 15/12.9, 15.5/13.4 16.6/14.5, 17.0/14.9 16.6/14.5, 17.1/15.0 13.5/11.4, 14/11.9 13.5/11.4, 14/11.9 13.6/11.5, 14.1/12
Length 2.6m (8'6") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 1.3m (4'3") 1.4m (4'7") 1.4m (4'7")
Part Number 7488.06 7487.02 7487.06 5483.00 5488.00 7481.00 7486.00 7486.02
306
POWERWAVE
P65-15-XD-N
POLARIZATION: X-Pol FREQUENCY (MHz): 790-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.6/12.5, 15.0/12.9 TILT: 2-12 LENGTH: 1.3m (44)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,16@2,7,12 30 <2.0 >-25 1 >25 >24 >15 >10 <-150 400 800 65 15.3 2 - 12 >19,18,17@2,7,12 30 <2.0 >-25 1 >25 >25 >15 >10 790-896 14.6/12.5 Dual linear 45 50 1.5:1 65 14.2 790-960 870-960 15.0/12.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1314x280x125 (44x11x4) Pre-mounted heavy duty brackets 14.5 (31.9) 9.0 (19.8) 367 / 63 / 441 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1475x355x255 (410x12x10) 18.5 (40.7) 8110.40. 8110.10 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
307
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5472.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.1/15.0, 17.5/15.4 TILT: 0-7.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 30 <2.0 >-18 0.5 >30 >25 >11 <-150 400 800 66 9.6 0 - 7.5 >20,17,15@0,4,7 30 <2.0 >-18 0.5 >30 >25 >11 806-896 17.1/15.0 Dual linear 45 50 1.5:1 64 9.2 806-960 870-960 17.5/15.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2080x280x125 (68x11x4) Pre-mounted heavy duty brackets 20 (44) 14.5 (31.9) 664 / 102 / 798 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2225x355x255 (73x12x10) 24.5 (54) 8110.10 (AISG1.1), 8110.40 (AISG2.0) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
308
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5473.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 18.5/16.4 TILT: 0-5.5 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <2.0 >-18 0.3 >30 >25 >11 <-150 400 800 67 7.5 0-5.5 >20,17,15@0,2,5 >30 <2.0 >-18 0.3 >30 >25 >11 806-896 17.7/15.6 Dual linear 45 50 1.5:1 64 7 806-960 870-960 18.5/16.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 21 (46.3) 15.5 (34.2) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 25 (55.1) 8110.10, 8110.40 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
309
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5477.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.5/14.4, 17.0/14.9 TILT: 0 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >30 >26 >20 >13 <-150 400 800 66 9.8 0 >20 >30 <1.0 >-18 0.2 >34 >28 >18 >12 806-896 16.5/14.4 Dual linear 45 50 1.4:1 64 9.2 806-960 880-960 17.0/14.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 17.5 (38.5) 12.0 (26.4) 664 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2225x355x255 (73x12x10) 22 (48.4) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
310
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5478.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 18.1/16.0 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >31 >29 >20 >12 <-150 400 800 66 7.3 0 >20 >30 <1.0 >-18 0.3 >36 >29 >20 >12 806-896 17.4/15.3 Dual linear 45 50 1.4:1 64 7.0 806-960 880-960 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
311
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5478.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.2, 18.0/15.8 TILT: 6 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >15 30 <2.0 >-20 0.5 >30 >28 >20 >12 <-150 300 600 68 7.5 6 >15 30 <1.0 >-20 0.5 >30 >27 >20 >12 806-896 17.4/15.2 Dual linear 45 50 1.4:1 64 7.0 806-960 880-960 18.0/15.8
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 19.7 (41.4) 14.5 (30.5) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 25.5 (53.5) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
312
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7476.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.5/12.4, 15/12.9 TILT: 0 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 >-25 1 >30 >25 >18 >12 <-150 400 800 66 15.9 0 >19 30 <1.0 >-25 1 >30 >25 >18 >12 806-896 14.5/12.4 Dual linear 45 50 1.4:1 64 15.3 806-960 880-960 15/12.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 367 42 (93) 67 (150) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 18 (39.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
313
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7476.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.6/12.5, 15.1/13 TILT: 2 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 >-25 1 >30 >25 >12 <-150 400 800 66 14.9 2 >19 30 <1.0 >-25 1 >30 >25 >12 806-896 14.6/12.5 Dual linear 45 50 1.4:1 64 13.8 806-960 880-960 15.1/13
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 18 (39.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
314
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7476.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.6/12.5, 15.1/13 TILT: 6 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 >-25 1 >30 >25 >18 >12 <-150 400 800 66 15.3 6 >19 30 <1.0 >-25 1 >30 >25 >18 >12 806-896 14.6/12.5 Dual linear 45 50 1.4:1 64 13.9 806-960 880-960 15.1/13
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 367 42 (93) 67 (150) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 18 (39.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
315
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7477.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.6/13.5, 16.2/14.1 TILT: 0 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 >-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 0 >20 30 <1.0 >-18 0.5 >30 >25 >12 806-896 15.6/13.5 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.2/14.1
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
316
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7477.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.8/13.7, 16.3/14.2 TILT: 2 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <2.0 >-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 2 >20 30 <2.0 >-18 0.5 >30 >25 >12 806-896 15.8/13.7 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
317
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7478.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.9/14.8, 17.3/15.2 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 >-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 0 >20 30 <1.0 >-18 0.3 >30 >25 >12 806-896 16.9/14.8 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.3/15.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
318
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7472.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16/13.9, 16.5/14.4 TILT: 0-7.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 30 <2.0 >-18 0.5 >30 >25 >11 <-150 400 800 67 10 0-7.5 >20,17,15@0,4,7 30 <2.0 >-18 0.5 >30 >25 >11 806-896 16/13.9 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.5/14.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2080x280x125 (68x11x4) Pre-mounted heavy duty brackets 20 (44) 14.5 (31.9) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 24.5 (54) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
319
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7472.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.1/15.0, 17.5/15.4 TILT: 0-7.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 30 <2.0 >-18 0.5 >30 >25 >11 <-150 400 800 66 9.6 0-7.5 >20,17,15@0,4,7 30 <2.0 >-18 0.5 >30 >25 >11 806-896 17.1/15.0 Dual linear 45 50 1.5:1 64 9.2 806-960 870-960 17.5/15.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2080x280x125 (68x11x4) Pre-mounted heavy duty brackets 20(44) 14.5(31.9) 664 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2225x355x255 (73x12x10) 24.5 (54) 8110.10(AISG1.1),8110.40(AISG2.0) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
320
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7477.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16/13.9, 16.5/14.4 TILT: 6 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 >-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 6 >20 30 <1.0 >-18 0.5 >30 >25 >12 806-896 16/13.9 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.5/14.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
321
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7478.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17/14.9, 17.4/15.3 TILT: 2 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 >-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 2 >20 30 <1.0 >-18 0.3 >30 >25 >12 806-896 17/14.9 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.4/15.3
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
322
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7478.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17/14.9, 17.4/15.3 TILT: 6 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 >-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 6 >20 30 <1.0 >-18 0.3 >30 >25 >12 806-896 17/14.9 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.4/15.3
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
323
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7478.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 18.1/16.0 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >31 >29 >20 >12 <-150 400 800 66 7.3 0 >20 >30 <1.0 >-18 0.3 >36 >29 >20 >12 806-896 17.4/15.3 Dual linear 45 50 1.4:1 64 7.0 806-960 880-960 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
324
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7473.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.2/15.1, 17.5/15.4 TILT: 0-5.5 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 30 <2.0 >-18 0.3 >30 >25 >11 <-150 400 800 67 7.5 0-5.5 >20,17,15@0,2,5 30 <2.0 >-18 0.3 >30 >25 >11 806-896 17.2/15.1 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.5/15.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2580x280x125 (84x11x4) Pre-mounted heavy duty brackets 24 (52.9) 18.5 (40.7) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 28 (61.7) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
325
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7473.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.5/16.4 TILT: 0-5.5 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <2.0 >-18 0.3 >30 >25 >11 <-150 400 800 67 7.5 0-5.5 >20,17,15@0,2,5 >30 <2.0 >-18 0.3 >30 >25 >11 806-896 17.7/15.6 Dual linear 45 50 1.5:1 64 7 806-960 870-960 18.5/16.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 21(46.3) 15.5 (34.2) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 25 (55.1) 8110.10,8110.40 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
326
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7486.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.6/11.5, 14/11.9 TILT: 6 LENGTH: 1.3m (45)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-25 0.6 >27 >22 >22 >10 <-150 400 800 87 15.5 6 >18 >30 <1.0 >-25 0.6 >28 >22 >21 >11 806-896 13.6/11.5 Dual linear 45 50 <1.4:1 85 13.9 806-960 880-960 14/11.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 20.5 (45.1) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
327
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7487.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 14.8/12.7, 15.4/13.3 TILT: 0 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.1 >28 >22 >20 >10 <-150 400 800 87 9.7 0 >20 >30 <1.0 >-18 0.2 >29 >22 >19 >10 806-896 14.8/12.7 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.4/13.3
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 25 (55.1) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
328
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7482.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 14.8/12.7, 15.5/13.4 TILT: 0-7.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 >30 <1.0 >-25 0.4 >27 >22 >20 >10 <-150 400 600 88 9.6 0-7.5 >20,17,15@0,4,7 >30 <1.0 >-20 0.4 >27 >22 >19 >10 806-896 14.8/12.7 Dual linear 45 50 <1.4:1 86 9 806-960 870-960 15.5/13.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 27 (59.5) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
329
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7488.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15.8/13.7, 16.3/14.2 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.2 >27 >22 >21 >10 <-150 400 800 87 7.6 0 >20 >30 <1.0 >-18 0.1 >27 >22 >20 >10 806-896 15.8/13.7 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 29.5 (65) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
330
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7488.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15.8/13.7, 16.3/14.2 TILT: 2 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >26 >22 >20 >10 <-150 400 800 87 7.6 2 >20 >30 <1.0 >-18 0.2 >27 >22 >20 >10 806-896 15.8/13.7 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 29.5 (65) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
331
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7488.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.6/14.5, 17.1/15.0 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.2 >27 >22 >20 >10 <-150 400 800 87 7.6 0 >20 >30 <1.0 >-18 0.1 >27 >22 >20 >10 806-896 16.6/14.5 Dual linear 45 50 <1.4:1 84 7.0 806-960 870-960 17.1/15.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255(811x12x10) 29.5 (65) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
332
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7483.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15.9/13.8, 16.3/14.2 TILT: 0-5.5 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <1.0 >-23 0.3 >27 >22 >21 >10 <-150 400 800 87 7.5 0-5.5 >20,17,15@0,2,5 >30 <1.0 >-21 0.3 >28 >22 >20 >10 806-896 15.9/13.8 Dual linear 45 50 <1.4:1 84 6.9 806-960 880-960 16.3/14.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 26.5 (58.4) 21 (46.2) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 31.5 (69.4) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
333
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7483.00A
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.6/14.5, 17.0/14.9 TILT: 0-5.5 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <1.0 >-23 0.3 >27 >22 >21 >10 <-150 400 800 90 7.5 0 - 5.5 >20,17,15@0,2,5 >30 <1.0 >-21 0.3 >28 >22 >21 >10 806-896 16.6/14.5 Dual linear 45 50 <1.4:1 90 6.9 806-960 870-960 17.0/14.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 26.5 (58.4) 21 (46.2) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 31.5 (69.4) 8110.10, 8110.40 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
334
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7488.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15.9/13.8, 16.4/14.3 TILT: 6 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.1 >26 >22 >20 >10 <-150 400 800 87 7.6 6 >20 >30 <1.0 >-20 0.2 >27 >22 >20 >10 806-896 15.9/13.8 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.4/14.3
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 29.5 (65) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
335
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7487.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15/12.9, 15.5/13.4 TILT: 2 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.3 >28 >22 >20 >10 <-150 400 800 87 9.7 2 >20 >30 <1.0 >-18 0.2 >29 >22 >20 >10 806-896 15/12.9 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.5/13.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 25 (55.1) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
336
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7487.06
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15/12.9, 15.5/13.4 TILT: 6 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17 >30 <1.0 >-20 0.1 >28 >22 >20 >10 <-150 400 800 87 9.7 6 >20 >30 <1.0 >-20 0.2 >28 >22 >19 >10 806-896 15/12.9 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.5/13.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 25 (55.1) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
337
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5483.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.6/14.5, 17.0/14.9 TILT: 0-5.5 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <1.0 >-23 0.3 >27 >22 >21 >10 <-150 400 800 90 7.5 0 - 5.5 >20,17,15@0,2,5 >30 <1.0 >-21 0.3 >28 >22 >21 >10 806-896 16.6/14.5 Dual linear 45 50 <1.4:1 90 6.9 806-960 870-960 17.0/14.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 26.5 (58.4) 21 (46.2) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 31.5 (69.4) 8110.10, 8110.40 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
338
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
5488.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.6/14.5, 17.1/15.0 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.2 >27 >22 >20 >10 <-150 400 800 87 7.6 0 >20 >30 <1.0 >-18 0.1 >27 >22 >20 >10 806-896 16.6/14.5 Dual linear 45 50 <1.4:1 84 7.0 806-960 870-960 17.1/15.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255(811x12x10) 29.5 (65) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
339
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7481.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.5/11.4, 14/11.9 TILT: 2-12 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,18,17@2,7,12 >30 <2 >-18 0.5 >27 >23 >9 <-150 400 800 87 15 2-12 >19,18,17@2,7,12 >30 <2 >-18 0.5 >27 >23 >9 806-896 13.5/11.4 Dual linear 45 50 <1.4:1 85 14 806-960 870-960 14/11.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 22.5 (49.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
340
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7486.00
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.5/11.4, 14/11.9 TILT: 0 LENGTH: 1.3m (45)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-21 0.6 >27 >22 >21 >10 <-150 400 800 87 15.5 0 >20 >30 <1.0 >-25 0.4 >27 >22 >22 >11 806-896 13.5/11.4 Dual linear 45 50 <1.4:1 84 14 806-960 880-960 14/11.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 20.5 (45.1) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
341
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7486.02
POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.6/11.5, 14.1/12 TILT: 2 LENGTH: 1.3m (45)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-23 0.4 >28 >22 >21 >10 <-150 400 800 87 15.4 2 >20 >30 <1.0 >-25 0.4 >28 >22 >21 >11 806-896 13.6/11.5 Dual linear 45 50 1.4:1 84 14 806-960 880-960 14.1/12
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 20.5 (45.1) 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
342
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65 65
Gain dBi dBd 14.5/12.4 14.5/12.4 16.0/13.9 16.0/13.9 16.0/13.9 17.5/15.4 17.5/15.4
Tilt 2 4 2 4 6 2 4
343
POWERWAVE
P65-15-XL-2
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.5/12.4 TILT: 2 LENGTH: 1.2m (48)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800 68 16.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 698-806 14.0/11.9 Dual Linear +/- 45 50 < 1.33:1 65 15.5 698-894 806-894 14.5/12.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female Bottom 48x12x5 (1219x305x125) Pre-mounted Tilt Brackets 33 (15) 22 (10) 400 100 (45) 125 (55) DC Ground -40C to +60C PVC Light Grey 58 x 16 x 10 (1475 x 400 x 255) 44 (22) N/A 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
344
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-15-XL-4
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.5/12.4 TILT: 4 LENGTH: 1.2m (48)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800 68 16.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 698-806 14.0/11.9 Dual Linear +/- 45 50 < 1.33:1 65 15.5 698-894 806-894 14.5/12.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female Bottom 48x12x5 (1219x305x125) Pre-mounted Tilt Brackets 33 (15) 22 (10) 400 100 (45) 125 (55) DC Ground -40C to +60C PVC Light Grey 58 x 16 x 10 (1475 x 400 x 255) 44 (20) N/A 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
345
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-16-XL-2
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.0/13.9 TILT: 2 LENGTH: 1.8m (72)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.5/13.4 Dual Linear +/- 45 50 < 1.33: 1 68 10.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800 698-894 806-894 16.0/13.9 Dual Linear +/- 45 50 < 1.33: 1 65 9.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female Bottom 72 x 12 x 5 (1829 x 305 x 125) Pre-mounted Tilt Brackets 44 (20) 33 (15) 680 100 (45) 125 (55) DC Ground -40C to +60C PVC Light Grey 82 x 16 x 10 (2082 x 400 x 255) 55 (25) N/A 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
346
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-16-XL-4
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.0/13.9 TILT: 4 LENGTH: 72
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.5/13.4 Dual Linear +/- 45 50 < 1.33: 1 68 10.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800 698-894 806-894 16.0/13.9 Dual Linear +/- 45 50 < 1.33: 1 65 9.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female Bottom 72 x 12 x 5 (1829 x 305 x 125) Pre-mounted Tilt Brackets 44 (20) 33 (15) 1380 100 (45) 125 (55) DC Ground -40C to +60C PVC Light Grey 82 x 16 x 10 (2082 x 400 x 255) 55 (25) N/A 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
347
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-16-XL-6
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.0/13.9 TILT: 6 LENGTH: 1.8m (72)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.5/13.4 Dual Linear +/- 45 50 < 1.33: 1 68 10.5 6 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 698-894 806-894 16.0/13.9 Dual Linear +/- 45 50 < 1.33: 1 65 9.5 6 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets PVC Light Grey 82 x 16 x 10 (2082 x 400 x 255) 55 (25) N/A 7256.00, 7454.00 2 X 7/16 DIN Female Bottom 72 x 12 x 5 (1829 x 305 x 125) Pre-mounted Tilt Brackets 44 (20) 33 (15) 680 100 (45) 125 (55) DC Ground
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
348
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-17-XL-2
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: 2 LENGTH: 2.4m (96)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 16.5/14.4 Dual Linear +/- 45 50 < 1.33:1 68 8.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800 698-894 806-894 17.5/15.4 Dual Linear +/- 45 50 < 1.33:1 65 7.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female Bottom 96 x 12 x 5 (2438 x 305 x 125) Pre-mounted Tilt Brackets 54 (25) 43 (20) 880 100 (45) 125 (55) DC Ground -40C to +60C PVC Light Grey 107 x 16 x 10 (2725 x 400 x 255) 65 (30) N/A 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
349
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-17-XL-4
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: 4 LENGTH: 2.4m (96)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 16.5/14.4 Dual Linear +/- 45 50 < 1.33:1 68 8.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800 698-894 806-894 17.5/15.4 Dual Linear +/- 45 50 < 1.33:1 65 7.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 <-153 400 800
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female Bottom 96 x 12 x 5 (2438 x 305 x 125) Pre-mounted Tilt Brackets 54 (25) 43 (20) 880 100 (45) 125 (55) DC Ground -40C to +60C PVC Light Grey 107 x 16 x 10 (2725 x 400 x 255) 65 (30) N/A 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
350
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65 65 90 90
Gain dBi dBd 17.7/15.6, 17.7/15.6, 17.9/15.8 17.7/15.6, 17.9/15.8, 18.1/16 17.7/15.6, 17.9/15.8, 18.1/16 18/15.9 18/15.9 17.7/15.6, 17.9/15.8, 18.1/16 19/16.9, 19.2/17.1, 19.4/17.3 16.1/14, 16.2/14.1, 16.5/14.4 17.4/15.3, 17.5/15.4, 17.7/15.6
Tilt MET MET MET MET MET MET MET MET MET
Length 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 1.3m (4'3") 2.0m (6'6")
Part Number 7760.02 7760.00 7760.00A 7760.03 7760.06 7760.40 7765.00 7762.00 7766.00
Page 352 353 354 355 356 357 358 359 360
351
POWERWAVE
7760.02
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 2-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 2-10 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-153 250 1000 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 63 6.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
352
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7760.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >16 <-153 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-8 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-153 250 1000 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 64 6.2 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 70 (156) DC grounded -40C to +60C ASA Light Grey 1430x430x250 (48x13x9) 23.5 (51.8) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
353
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7760.00A
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >16 <-150 65 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-8 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-150 250 1000 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 64 6.2 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1430x430x250 (48x13x9) 23.5 (51.8) 8110.10, 8110.40 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
354
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7760.03
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 2-10/6-14 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 2 to 10 and 6 to 14 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-153 250 1000 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 63 6.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
355
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7760.06
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 6-14 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,16@6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 6-14 >17,16@6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >18 >13 <-153 250 1000 >17,16@6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 63 6.2 1920-2170 17.9/15.8
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
356
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7760.40
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 <-160 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-8 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-153 <-160 64 6.2 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Top 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 1093 42 (93) 55 (123) DC grounded -40C to +60C ASA Light grey 1430x400x200 (48x13x7) 23.5 (51.8) 8220.10,8220.40,8110.10,8110.40 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
357
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7765.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 19.0/16.9, 19.2/17.1, 19.4/17.3 TILT: 0-5.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,15,13@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >16 >16 <-153 <-160 67 4.7 1710-1880 19.0/16.9 1710-2170 1850-1990 19.2/17.1 Dual linear 45 50 <1.4:1 65 4.4 0-5.5 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >18 >13 <-153 <-160 250 1000 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >20 >10 <-153 <-160 63 4.2 1920-2170 19.4/17.3
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1934x343x100 (64x11x3) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 819 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2085x430x250 (610x13x9) 27 (59.5) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
358
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7762.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.1/14.0, 16.2/14.1, 16.5/14.4 TILT: 0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,17,16,15,14@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >24 >23 >17 >7 <-153 <-160 89 7.0 1710-1880 16.1/14.0 1710-2170 1850-1990 16.2/14.1 Dual linear 45 50 <1.4:1 93 6.7 0-8 >17,17,16,15,14@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >17 >7 <-153 <-160 250 1000 >20,18,17,16,15@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >26 >23 >12 >7 <-153 <-160 90 6.3 1920-2170 16.5/14.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 23.5 (51.8) 18 (39.6) 520 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
359
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7766.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6 TILT: 0-5.5 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,15,14,13,11@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >16 >8 <-153 <-160 89 4.7 1710-1880 17.4/15.3 1710-2170 1850-1990 17.5/15.4 Dual linear 45 50 <1.4:1 93 4.4 0-5.5 >20,20,17,16,14,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >16 >8 <-153 <-160 250 1000 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >12 >8 <-153 <-160 90 4.2 1920-2170 17.7/15.6
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1934x343x100 (64x11x3) Pre-mounted heavy duty brackets 27.5 (60.6) 22 (48.5) 819 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2085x430x250 (610x13x9) 32 (70.5) 8110.40. 8110.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
360
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65
Gain dBi dBd 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 16.7/14.6, 17.6/15.5 16.7/14.6, 17.6/15.5 17.3/15.2, 17.8/15.7 17.3/15.2, 17.8/15.7
Length 1.4m (47) 1.4m (47) 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (86)
361
POWERWAVE
7750.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.2/13.1, 18/15.9 TILT: 2-12/0-8 LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >27 >24 15 10 <0.33 <-153 300 600 2,4,6,8,10,12 30 40 <1.0 >-25 0.5 >27 >24 15 8 <0.48 <2.0 >-25 0.3 >27 >24 20 7 <0.62 <2.0 >-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 500 <2.0 >-25 0.3 >27 >24 20 >7 <0.62 69 14.9 2 - 12 >18,17,16,16,15,15@ >18,17,16,16,15,15@ 2,4,6,8,10,12 30 2,4,6,8 30 824-896 14.6/12.5 50 1.5:1 67 13.7 65 6.9 824-960 870-960 15.2/13.1 1710-1880 17.5/15.4 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 1.5:1 65 6.6 0-8 >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@ 2,4,6,8 30 2,4,6,8 30 62 6.2 1900-2170 18.0/15.9
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 415 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1550x355x255 (51x12x10) 21.5 (47.3) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
362
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7750.00A
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.2/13.1, 18.0/15.9 TILT: 2-12/0-8 LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >27 >24 15 10 <0.33 <-150 300 600 2,4,6,8,10,12 30 40 <1.0 >-25 0.5 >27 >24 15 8 <0.48 <2.0 >-25 0.3 >27 >24 20 7 <0.62 <2.0 >-25 0.3 >27 >24 20 7 <0.62 <-150 <-160 250 500 <2.0 >-25 0.3 >27 >24 20 7 <0.62 69 14.9 2 - 12 >18,17,16,16,15,15@ >18,17,16,16,15,15@ 2,4,6,8,10,12 30 0,2,4,6,8 30 824-896 14.6/12.5 50 1.5:1 67 13.7 65 6.9 824-960 870-960 15.2/13.1 1710-1880 17.5/15.4 1710-2170 1850-1990 17.7/15.6 Dual Linear 45 50 1.5:1 65 6.6 0-8 >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@ 0,2,4,6,8 30 0,2,4,6,8 30 62 6.2 1900-2170 18.0/15.9
Dual Linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 X 7/16 DIN Female Bottom 1408X280X125mm (47X11X4) Pre Mounted Heavy Duty Brackets 17.6 (39) 12.1 (27) 415 42 (93) 70 (156) DC Grounded -40C to +60C PVC Light Grey 1550X355X25mm (51X12X10) 21.5 (47.3) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
363
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7752.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.7/14.6, 17.6/15.5 TILT: 2-9/0-8 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600 >17,16,15,14@ 2,4,6,8 30 40 <1.0 >-25 0.5 >27 >25 15 > 9.5 <0.39 <2.0 >-25 0.5 >27 >25 16 > 6.2 <0.5 <2.0 >-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500 <3 >-25 0.4 >30 >25 16 > 7.5 <0.59 71 9.6 2-9 >17,16,15,14@ 2,4,6,8 30 >17,16,15,14,13@ 2,4,6,8 30 824-896 15.8/13.7 50 1.5:1 67 8.9 63 7.1 824-960 870-960 16.7/14.6 1710-1880 17.1/15 1710-2170 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 63 6.6 0-8 >18,18,17,16,16@ 2,4,6,8 30 >20,19,19,18,17@ 2,4,6,8 30 61 6.3 1900-2170 17.6/15.5
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 653 42 (93) 70 (156) DC grounded -40C to +60C GRP Light Grey 2175x355x255 (72x14x10) 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
364
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7752.00A
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.7/14.6, 18.1/16.0 TILT: 2-9/0-8 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >28 >26 >12 > 12 <0.26 <-150 300 600 >17,16,15,14@ 2,4,6,8 30 40 <1.0 >-25 0.5 >31 >27 >9.5 > 9.5 <0.39 <2.0 >-25 0.5 >28 >27 >7.5 > 6.2 <0.5 <2.0 >-25 0.5 >31 >28 >6.9 > 6.5 <0.59 <-150 <-160 250 500 <3 >-25 0.4 >32 >29 >7.5 > 7.5 <0.59 71 9.6 2-9 >17,16,15,14@ 2,4,6,8 30 >17,16,15,14,13@ 2,4,6,8 30 824-896 15.8/13.7 50 1.5:1 67 8.9 63 7.0 824-960 870-960 16.7/14.6 1710-1880 17.6/15.5 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 1.5:1 63 6.6 0-8 >18,18,17,16,16@ 2,4,6,8 30 >20,19,19,18,17@ 2,4,6,8 30 61 6.3 1900-2170 18.1/16.0
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 653 42 (93) 70 (156) DC grounded -40C to +60C PVC Light Grey 2175x355x255 (72x14x10) 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
365
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7755.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.3/15.2, 17.8/15.7 TILT: 2-8/0-8 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600 2,4,6,8 30 38 <1.0 >-25 0.5 >30 >25 14 > 9.5 <0.41 <1.5 >-25 0.5 >30 >25 16 > 6.3 <0.53 71 7.4 2-8 >18,18,17,16,16@ >18,18,17,16,16@ 2,4,6,8 30 >17,16,15,14,13@ 2,4,6,8 30 824-896 16.6/14.5 50 1.5:1 67 7 65 6.9 824-960 870-960 17.3/15.2 1710-1880 17.3/15.2 1710-2170 1850-1990 17.6/15.5 Dual linear 45 50 1.5:1 65 6.4 0-8 >17,17,16,15,14@ 2,4,6,8 30 <1 >-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 500 <3.5 <-25 0.5 >30 >25 16 >7.5 <0.58 >17,17,16,15,14@ 2,4,6,8 30 62 6.1 1900-2170 17.8/15.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 880 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2800x355x255 (92x12x10) 32.5 (71.6) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
366
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7755.00A
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.3/15.2, 17.8/15.7 TILT: 2-8/0-8 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >30 >25 >16 >11 <0.3 <-150 300 600 2,4,6,8 30 38 <1.0 >-25 0.5 >30 >25 >14 > 9.5 <0.41 <1.5 >-25 0.5 >30 >25 >16 > 6.3 <0.53 <1 >-25 0.5 >30 >25 >16 >7.2 <0.58 <-150 <-160 250 500 <3.5 >-25 0.5 >30 >25 >16 >7.5 <0.58 71 7.4 2-8 >18,18,17,16,16@ >18,18,17,16,16@ 2,4,6,8 30 >17,16,15,14,13@ 0,2,4,6,8 30 824-896 16.6/14.5 50 1.5:1 67 7 65 6.9 824-960 870-960 17.3/15.2 1710-1880 17.3/15.2 1710-2170 1850-1990 17.6/15.5 Dual linear 45 50 1.5:1 65 6.4 0-8 >17,17,16,15,14@ 0,2,4,6,8 30 >17,17,16,15,14@ 0,2,4,6,8 30 62 6.1 1900-2170 17.8/15.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 880 42 (93) 55 (123) DC grounded -40C to +60C PVC Light grey 2800x355x255 (92x12x10) 32.5 (71.6) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
367
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65
Gain dBi dBd 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 17.3/15.2, 17.9/15.8, 17.9/15.8 17.3/15.2, 17.9/15.8, 17.9/15.8
Length 1.4m (47) 1.4m (47) 2.0m (66) 2.0m (66) 2.6m (86) 2.6m (86)
368
POWERWAVE
7780.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.8/12.7, 14.8/12.7 TILT: 2-12/0-12/0-12 LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 >-25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 300 600 >18,17,16,16@ 2,4,8,12 30 38 <2 >-25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 >-25 0.7 >28 >24 16 >6 < 0.55 71 14.9 2 - 12 >17,16,15,14@ 2,4,8,12 30 >17,16,15,14@ 0,4,8,12 30 824-896 14.1/12 50 1.5:1 67 13.9 65 13.3 824-960 870-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 30 38 <1.2 >-25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 >-25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12.0 1900-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1550x355x200 (51x12x7) 23 (50.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
369
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7780.00A
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 2-12/0-12/0-12 LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 >-25 0.7 >27 >24 15 > 9.3 < 0.35 <-150 300 600 >18,17,16,16@ 2,4,8,12 30 38 <2 >-25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 >-25 0.7 >28 >24 16 >6 < 0.55 71 14.9 2 - 12 >17,16,15,14@ 2,4,8,12 30 >17,16,15,14@ 0,4,8,12 30 824-896 14.1/12 50 1.5:1 67 13.9 65 13.3 824-960 870-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 30 38 <1.2 >-25 1 >28 >24 18 >5.5 < 0.74 <-150 <-160 250 500 <4 >-25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 62 12 1900-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1550x355x200 (51x12x7) 23 (50.7) 8230.10,8230.40, 8210.10,8210.40 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
370
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7782.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 2-9/0-10/0-10 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >28 >26 16 >11 <0.27 <-153 300 600 >18,17,16,16@ 2,5,7,9 >30 >34 <1 >-25 0.5 >30 >26 15 >9.2 <0.47 <1.5 >-25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 2-9 >18,17,16,16@ 2,5,7,9 >30 >17,15,13@ 0,6,10 >30 824-896 15.8/13.7 50 1.5:1 67 8.6 65 10 824-960 870-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 1.5:1 65 9.4 0 - 10 >17,15,14@ 0,6,10 >30 >34 <2 >-25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 >-25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1900-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted heavy duty brackets 23.4 (48) 17.9 (39) 653 42 (93) 67 (150) DC grounded -40C to +60C GRP Light Grey 2175x355x255 (72x14x10) 28 (61.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
371
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7782.00A
POLARIZATION: XXX-pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 2-9/0-10/0-10 LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.5 > 28 > 26 16 > 11 < 0.27 < -150 300 600 >18,17,16,16@ 2,5,7,9 degree > 30 > 34 <1 25 0.5 > 30 > 26 15 >9 < 0.47 < 1.5 25 0.5 > 27 > 25 16 >7 < 0.52 71 9.6 2-9 > 18, 17, 16, 16@ 2,5,7,9 degree > 30 > 17, 15, 13@ 0, 6, 10 degree > 30 824-896 15.8/13.7 50 < 1.5:1 67 8.6 65 10 824-960 870-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14.0 Dual Linear +/- 45 50 < 1.5:1 65 9.4 0 - 10 > 17, 15, 14@ 0, 6, 10 degree > 30 > 34 <2 25 0.5 > 28 > 27 16 >6 < 0.66 < -150 < -160 250 500 <4 25 0.5 > 30 > 27 15 >6 < 0.66 > 17, 16, 15@ 0, 6, 10 degree > 30 63 8.7 1900-2170 16.5/14.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6 x 7/16 DIN Female Bottom 2033x280x125 (68x11x4) Pre-mounted heavy duty brackets 23.4 (48) 17.9 (39) 653 42 (93) 55 (123) DC Ground -40C to +60C PVC Light Grey 2175x355x255 (72x14x10) 28 (61.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
372
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7785.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8 TILT: 2-8/0-8/0-8 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.5 >28 >27 16 >12 <0.24 <-153 300 600 >17,16,15,14@ 2,4,6,8 >30 38 <1 25 0.5 >28 >27 15 >9.5 <0.44 <1.1 25 0.5 >30 >27 16 >7.0 <0.47 71 7.4 2-8 >17,16,15,14@ 2,4,6,8 >30 >17,16,15,14,13@ 0,2,4,6,8 >30 824-896 16.7/14.6 50 1.5:1 67 6.9 66 6.7 824-960 870-960 17.3/15.2 1710-1880 17.3/15.2 2x1710-2170 1850-1990 17.5/15.4 Dual linear 45 50 1.5:1 65 6.4 0-8 >17,16,15,14,13@ 0,2,4,6,8 >30 38 <1.0 25 0.5 >30 >27 15 >7.5 <0.52 <-160 250 500 <2.9 25 0.5 >30 >25 17 >7.7 <0.52 >17,16,16,15,15@ 0,2,4,6,8 >30 62 6.2 1900-2170 17.9/15.8
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 27.7 (61) 22.2 (49) 880 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2800x355x255 (92x12x10) 33 (72.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
373
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7785.00A
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8 TILT: 2-8/0-8/0-8 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 >-25 0.5 >28 >27 16 > 12 <0.24 <-150 300 600 >17,16,15,14@ 2,4,6,8 >30 38 <1 >-25 0.5 >28 >27 15 >9.5 <0.44 <1.1 >-25 0.5 >30 >27 16 >7.0 < 0.47 71 7.4 2-8 >17,16,15,14@ 2,4,6,8 >30 >17,16,15,14,13@ 0,2,4,6,8 >30 824-896 16.7/14.6 50 1.5:1 67 6.9 66 6.7 824-960 870-960 17.3/15.2 1710-1880 17.3/15.2 2x1710-2170 1850-1990 17.5/15.4 Dual linear 45 50 1.5:1 65 6.4 0-8 >17,16,15,14,13@ 0,2,4,6,8 >30 38 <1.0 >-25 0.5 >30 >27 15 > 7.5 <0.52 <-150 <-160 250 500 <2.9 >-25 0.5 >30 >25 17 > 7.7 <0.52 >17,16,16,15,15@ 0,2,4,6,8 >30 62 6.2 1900-2170 17.9/15.8
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 27.7 (61) 22.2 (49) 880 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2800x355x255 (92x12x10) 33 (72.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
374
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65
Gain dBi dBd 17.4/15.3, 17.6/15.5, 17.4/15.3 16.0/13.9, 15.9/13.8, 15.8/13.7 14.5/12.4, 14.6/12.5, 14.4/12.3
375
P65-18-XDHW2-N
Triple Broadband 790-960/1710-2170/2500-2690MHz
Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz under one radome and keeps independent variable down tilt capability for all three arrays. The 2.6GHz array supports both WiMAX and LTE2.6 applications.
Features:
q
Three independent arrays under one radome Aperture Coupled Patch technology for best in class performance Compatible with Powerwave RET modules
ELECTRICAL SPECIFICATIONS
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Front to back ratio (dB)
q q
1710-2170 1900-2170 17.8/15.7 Dual linear 45 50 <1.5:1 67 >27 >24 63 >27 >25 60 >27 >25 62 >27 >25 2500-2690 17.4/15.3
>13 6.9
>13 6.9
>13 6.2 2 - 10
>13 5.0
13 5.0 2 - 10
Vertical beam width, -3 dB () Electrical down tilt () 1st Upper Side Lobe suppression, typical (dB) Isolation, Intersystem, (dB) Isolation, Interband, typical, (dB) Intermodulation Products 3rd Order, 2 x 43dBm,(dBc) Intermodulation Products 5th Order, 2 x 43dBm,(dBc) Power handling, average per input (W) Power handling, average total (W)
>15 >30
>15 >30
>15 >30
>15 >30
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
376
P65-18-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector Connector position Dimensions, HxWxD, mm(ft) Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Packing size, HxWxD, mm (ft) Packing weight, kg (lbs) 6x 7/16 DIN Female Bottom 2705x282x155mm(106x11x6) 28.0(61.6) 22.5(49.5) 2845x486x290(112x19x11) 34.4(75.7) frontal: 883 Wind load at 150kmh, (N) lateral: 188 rear side: 1062 Maximum wind speed, kmh (mph) Survival wind speed, kmh (mph) Radome Material Radome colour Operating Temperature, C Environmental conditions Lightning protection Mounting 42(93) 55(123) ASA Light Gray -40C to +60C ETS 300 019-1-4 class 4.1E DC Grounded Pre-mounted heavy duty brackets
NOTES
Antenna installations must be grounded according to local and national codes. Do not install or work on antennas near power lines. Install or work on antennas or similar structures out of falling distance of all such lines. Every electrical and telephone wire is potential dangerous. RF-connectors torque recommendations must be followed. AISG connectors must be hand tightened.Do not use tools for AISG connectors tightening.
ANTENNA MOUNTS
7454.00A 7256.00 Triple Mount Bracket Heavy Duty Tilt Bracket 1-4.5
880MHz 2dt
1880MHz 2dt
2650MHz 2dt
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
377
P65-17-XDHW2-N
Triple Broadband 790-960/1710-2170/2500-2690MHz
Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz under one radome and keeps independent variable down tilt capability for all three arrays. The 2.6GHz array supports both WiMAX and LTE2.6 applications.
Features:
q
Three independent arrays under one radome Aperture Coupled Patch technology for best in class performance Compatible with Powerwave RET modules
ELECTRICAL SPECIFICATIONS
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Front to back ratio (dB)
q q
1710-2170 1900-2170 16.0/13.9 Dual linear 45 50 <1.5:1 67 >27 >24 66 >27 >25 63 >27 >25 66 >27 >25 2500-2690 15.8/13.7
>13 9.0
>13 8.9
>13 8.3 2 - 12
>13 7.6
13 7.6 2 - 12
Vertical beam width, -3 dB () Electrical down tilt () 1st Upper Side Lobe suppression, typical (dB) Isolation, Intersystem, (dB) Isolation, Interband, typical, (dB) Intermodulation Products 3rd Order, 2 x 43dBm,(dBc) Intermodulation Products 5th Order, 2 x 43dBm,(dBc) Power handling, average per input (W) Power handling, average total (W)
>15 >30
>15 >30
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
378
P65-17-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector Connector position Dimensions, HxWxD, mm(ft) Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Packing size, HxWxD, mm (ft) Packing weight, kg (lbs) 6x 7/16 DIN Female Bottom 2053x282x155mm (81x11x6) 23.9 (52.4) 18.4 (40.5) 2140x486x290 (84x19x11) 28.6 (63.0) frontal: 675 Wind load at 150kmh, (N) lateral: 143 rear side: 811 Maximum wind speed, kmh (mph) Survival wind speed, kmh (mph) Radome Material Radome colour Operating Temperature, C Environmental conditions Lightning protection Mounting 42 (93) 55 (123) ASA Light Grey -40C to +60C ETS 300 019-1-4 class 4.1E DC grounded Pre-mounted standard brackets
NOTES
Antenna installations must be grounded according to local and national codes. Do not install or work on antennas near power lines. Install or work on antennas or similar structures out of falling distance of all such lines. Every electrical and telephone wire is potential dangerous. RF-connectors torque recommendations must be followed. AISG connectors must be hand tightened.Do not use tools for AISG connectors tightening.
ANTENNA MOUNTS
7454.00A 7256.00 Triple Mount Bracket Heavy Duty Tilt Bracket 1-4.5
880MHz 2dt
1880MHz 2dt
2650MHz 2dt
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
379
P65-15-XDHW2-N
Triple Broadband 790-960/1710-2170/2500-2690MHz
Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz under one radome and keeps independent variable down tilt capability for all three arrays. The 2.6GHz array supports both WiMAX and LTE2.6 applications.
Features:
q
Three independent arrays under one radome Aperture Coupled Patch technology for best in class performance Compatible with Powerwave RET modules
ELECTRICAL SPECIFICATIONS
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Front to back ratio (dB)
q q
1710-2170 1900-2170 14.5/12.4 Dual linear 45 50 <1.5:1 67 >27 >24 63 >27 >24 60 >27 >24 65 >27 >24 2500-2690 14.4/12.3
>13 13.8
>13 14.4
>13 12.4 2 - 14
>13 13.6
13 13.6 2 14
Vertical beam width, -3 dB () Electrical down tilt () 1st Upper Side Lobe suppression, typical (dB) Isolation, Intersystem, (dB) Isolation, Interband, typical, (dB) Intermodulation Products 3rd Order, 2 x 43dBm,(dBc) Intermodulation Products 5th Order, 2 x 43dBm,(dBc) Power handling, average per input (W) Power handling, average total (W)
>15 >30
>15 >30
>15 >30
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
380
P65-15-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector Connector position Dimensions, HxWxD, mm(ft) Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Packing size, HxWxD, mm (ft) Packing weight, kg (lbs) 6x 7/16 DIN Female Bottom 1432x282x155mm (56.4x11x6) 19.5 (42.9) 14.2 (31.2) 1565x486x290 (61.6x19x11) 23.9 (52.6) frontal: 431 Wind load at 150kmh, (N) lateral: 97 rear side: 517 Maximum wind speed, kmh (mph) Survival wind speed, kmh (mph) Radome Material Radome colour Operating Temperature, C Environmental conditions Lightning protection Mounting 42 (93) 55 (123) ASA Light Grey -40C to +60C ETS 300 019-1-4 class 4.1E DC grounded Pre-mounted heavy duty brackets
NOTES
Antenna installations must be grounded according to local and national codes. Do not install or work on antennas near power lines. Install or work on antennas or similar structures out of falling distance of all such lines. Every electrical and telephone wire is potential dangerous. RF-connectors torque recommendations must be followed. AISG connectors must be hand tightened.Do not use tools for AISG connectors tightening.
ANTENNA MOUNTS
7454.00A 7256.00 Triple Mount Bracket Heavy Duty Tilt Bracket 1-4.5
880MHz 2dt
1880MHz 2dt
2650MHz 2dt
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com
381
Power wave
The Powerwave single band antennas outstanding performance in the field derives from excellent voltage standing wave ratio (VSWR), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at 45 to provide the independently fading signals needed for achieving top- quality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
382
POWERWAVE
Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz X-Urban Cross Polarized Antennas, 824-896/870-960 MHz Vertical Polarized Omni Vertical Cross Polarized Antennas, 806-896 MHz Urban Vertical Polarized Antennas, 824-896/870-960 MHz Vertical Polarized ALVC Vertical Polarized Antennas, , 806-896/1850-1990 MHz Page 384 386 Page 406 414 Page 438
383
POWERWAVE
Horizontal Beamwidth 90
Tilt FET
Page 385
384
POWERWAVE
7390.00B
POLARIZATION: X-Pol FREQUENCY (MHz): 806-896 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 10.5/8.4 TILT: FET LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-150 250 500 806-896 806-896 10.5/8.4 Linear slanted 50 <1.4:1 90 29 0 >13 <2 >19 >17 >13
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 2 x 7/16 DIN female Bottom 710x280x125 (24x11x5) Pre-mounted standard bracket 7.7 (17) 4 (8.8) 189 42 55 DC grounded -40C to +60C GRP Light Gray 850x355x200 (29x12x10) 9.5 (20.9) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
385
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
Gain dBi dBd 12.5/10.4 12.5/10.4 14.5/12.4 15.5/13.4 15/12.9 15/12.9 15/12.9 16.5/14.4 16.5/14.4 16.5/14.4 17.5/15.4 17.5/15.4 17.5/15.4 17.5/15.4 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9
Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET
Length 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.9m (6'2") 1.9m (6'2") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")
Part Number 7216.03 7282.03 7217.11 7217.04 7217.03 7263.01 7263.04 7255.03 7281.02 7281.04 7218.03 7218.04 7218.13 7218.14 7255.04 7218.05 7218.09 7218.15 7218.19
Page 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405
386
POWERWAVE
7216.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-150 250 500 880-960 880-960 12.5/10.4 Linear slanted 45 50 <1.3:1 65 26 0 >10 <0.3 >24 >20 >20
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 770x308x121 (26x1x5) 7.5 (16.5) 7456.00A, 7454.00, 7455.00, 7458.00 PVC 2 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.3 (16) 3.6 (7.9) 222 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
387
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7282.03
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 12.5/10.4 Linear slanted 45 50 <1.3:1 65 25 4 >9 <0.3 >22 >18 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 750x308x121 (26x1x5) 5 (11) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.7 (16.9) 4 (8.8) 222 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
388
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7217.11
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.5/12.4 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 14.5/12.4 Linear slanted 45 50 <1.3:1 65 13 9 >14 <0.3 >23 >19 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 10 (22) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 493 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
389
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7217.04
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 15.5/13.4 Linear slanted 45 50 <1.3:1 65 13 0 >14 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 10 (22) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 493 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
390
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7217.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 15/12.9 Linear slanted 45 50 <1.3:1 65 13 7 >14 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 10 (22) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 493 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
391
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7263.01
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Linear slanted 45 50 <1.4:1 65 13 0 >14 <0.3 >22 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (56x12x5) 8.5 (19) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1320x256x50 (52x10.4x2) Pre-mounted standard bracket 7.5 (16.5) 7.5 (16.5) 493 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
392
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7263.04
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Linear slanted 45 50 <1.4:1 65 13 6 >14 <0.3 >22 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (56x12x5) 8.5 (19) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1320x256x50 (52x10.4x2) Pre-mounted standard bracket 7.5 (16.5) 7.5 (16.5) 493 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
393
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7255.03
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 16.5/14.4 Linear slanted 45 50 <1.4:1 65 9 6 >15 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (69x1x5) 12 (26.5) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.2 (31.3) 10.5 (23.1) 794 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
394
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7281.02
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16.5/14.4 Linear slanted 45 50 <1.3:1 65 9 0 >15 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (69x1x5) 10 (22) 7256.00, 7454.00 2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted heavy duty bracket 14.5 (31.9) 9 (19.8) 794 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
395
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7281.04
POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16.5/14.4 Linear slanted 45 50 <1.3:1 65 9 6 >14 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (69x1x5) 10 (22) 7256.00, 7454.00 2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted heavy duty bracket 14.5 (31.9) 9 (19.8) 794 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
396
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.03
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 6 >17 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
397
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.04
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 4 >17 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
398
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.13
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 6 >18 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7256.00, 7454.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
399
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.14
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 4 >18 <0.5 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7256.00, 7454.00, 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
400
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7255.04
POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17/14.9 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17/14.9 Linear slanted 45 50 <1.4:1 65 9 0 >17 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (69x1x5) 12 (26.5) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.2 (31.3) 10.5 (23.1) 794 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
401
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.05
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 0 >18 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
402
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.09
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 2 >18 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7456.00A, 7454.00, 7455.00, 7458.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
403
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.15
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 0 >18 <0.3 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7256.00, 7454.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
404
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7218.19
POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 2 >18 <0.4 >24 >20 >20 >10 <-150 250 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7256.00, 7454.00 2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
405
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Gain dBi dBd 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9
Length 3.14m (10'4") 3.14m (10'4") 3m (910") 3m (910") 3m (910") 3m (910") 3m (910")
406
POWERWAVE
4168.21.33.00
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3.14m (104)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 11/8.9 Linear vertical 50 <1.4:1 360 6.5 0 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3140x78 (104x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 204 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
407
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
4168.21.33.03
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3.14m (104)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 11/8.9 Linear vertical 50 <1.4:1 360 6.5 3 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3140x78 (104x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 204 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
408
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
4168.11.33.00
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3m (910)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 0 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
409
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
4168.11.33.02
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3m (910)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 2 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
410
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
4168.11.33.03
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3m (910)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 3 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
411
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
4168.11.33.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3m (910)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 6 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
412
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
4168.11.33.52
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 11/8.9 TILT: FET LENGTH: 3m (910)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 2 uptilt 12 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included 1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
413
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 90 90 90 90 90 90 90 90
Gain dBi dBd 12.5/10.4 13/10.9 15.5/13.4 15.5/13.4 15.5/13.4 15/12.9 17.5/15.4 17/14.9 17/14.9 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9 18/15.9 12/9.9 14/11.9 14/11.9 15/12.9 15/12.9 16.5/14.4 16.5/14.4 16.5/14.4
Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET
Length 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.6m (8'6") 1.9m (6'2") 1.9m (6'2") 2m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.9m (6'2") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")
Part Number 7270.02 7225.04 7226.03 7226.04 7271.02 7271.03 7273.03 7227.14 7227.04 7272.02 7228.03 7228.04 7228.06 7228.08 7273.02 7230.04 7231.04 7231.06 7232.04 7232.07 7233.04 7233.06 7233.08
Page 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437
414
POWERWAVE
7270.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 12.5/10.4 Linear vertical 50 <1.3:1 65 28 0 >10 >-20 0.5 >24 <-150 300
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 770x308x121 (26x1x5) 8.3 (18.2) 7456.00A,7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.7 (16.9) 4 (8.8) 222 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
415
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7225.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 13/10.9 TILT: FET LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 13/10.9 Linear vertical 50 <1.3:1 65 26 0 >9 >-20 0.5 >25 <-150 300
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 1 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 8.7 (19.1) 5 (11) 222 42 55 DC grounded -40C to +60C PVC Light Gray 770x308x121 (26x1x5) 6 (13.2) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
416
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7226.03
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 15.5/13.4 Linear vertical 50 <1.3:1 65 14 6 >17 >-20 0.5 >25 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
417
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7226.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 15.5/13.4 Linear vertical 50 <1.3:1 65 14 0 >17 >-20 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
418
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7271.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 15.5/13.4 Linear vertical 50 <1.3:1 65 14 0 >17 >-20 0.5 >24 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18.7) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2 ) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
419
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7271.03
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 15/12.9 Linear vertical 50 <1.4:1 65 14 5 >15 >-20 0.5 >24 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18.7) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2 ) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
420
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7273.03
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 17.5/15.4 Linear vertical 50 <1.3:1 65 7 4 >17 >-20 0.5 >22 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2650x308x121 (88x1x5) 18.8 (41.4) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 17.7 (39) 14 (30.8) 1082 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
421
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7227.14
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17/14.9 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 17/14.9 Linear vertical 50 <1.3:1 65 9 0 >17 >-13 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (69x1x5) 13 (29) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIM female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.1 (31) 10.4 (22.9) 1199 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
422
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7227.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17/14.9 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 17/14.9 Linear vertical 50 <1.3:1 65 9 0 >17 >-13 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (69x1x5) 13 (29) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.1 (31) 10.4 (22.9) 794 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
423
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7272.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17/14.9 TILT: FET LENGTH: 2m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 17/14.9 Linear vertical 50 <1.4:1 65 9.5 0 >18 >-20 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x308x121 (48x1x5) 14.8 (32.6) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.7 (32.4) 11 (24.2) 794 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
424
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7228.03
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 18.0/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >19 >-20 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 17.0 (37.9) 7456.00A, 7454.00, 7455.00, 7458.00 1 x N-female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
425
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7228.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9 TILT: 0 LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 18.0/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >19 >-20 0.5 >23 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 17.0 (37.9) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
426
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7228.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 6 >17 >-20 0.5 >25 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
427
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7228.08
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 2 >17 >-20 0.5 >25 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
428
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7273.02
POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 824-896 824-896 18/15.9 Linear vertical 50 <1.3:1 65 7 0 >18 >-20 0.5 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2650x308x121 (88x1x5) 18.8 (41.4) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 17.7 (39) 14 (30.8) 1082 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
429
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7230.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 12/9.9 TILT: FET LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 12/9.9 Linear vertical 50 <1.3:1 90 27 0 >12 >-20 0.5 >20 <-150 300
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 805x216x156 (28x9x6) 7.5 (16.5) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 695x160x55 (23x6x2) Pre-mounted standard bracket 7 (15.4) 3.3 (7.2) 154 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
430
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7231.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 14/11.9 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 14/11.9 Linear vertical 50 <1.3:1 90 14 0 >15 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x216x156 (48x9x6) 11 (24.2) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1320x160x55 (44x6x2) Pre-mounted standard bracket 9.7 (21.3) 6 (13.2) 281 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
431
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7231.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 14/11.9 TILT: FET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 14/11.9 Linear vertical 50 <1.3:1 90 14 6 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 1430x216x156 (48x9x6) 11 (24.2) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1320x160x55 (44x6x2) Pre-mounted standard bracket 9.7 (21.3) 6 (13.2) 281 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
432
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7232.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15/12.9 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 15/12.9 Linear vertical 50 <1.3:1 90 9 0 >15 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x216x156 (69x9x6) 15 (33) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1940x160x55 (64x6x2) Pre-mounted standard bracket 13.7 (30.2) 10 (22) 502 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
433
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7232.07
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 15/12.9 TILT: FET LENGTH: 1.9m (62)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 15/12.9 Linear vertical 50 <1.3:1 90 9 4 >15 >-15 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2050x216x156 (69x9x6) 15 (33) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 1940x160x55 (64x6x2) Pre-mounted standard bracket 13.7 (30.2) 10 (22) 502 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
434
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7233.04
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 0 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 680 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
435
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7233.06
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 6 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 680 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
436
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7233.08
POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 2 >17 >-20 0.5 >20 <-150 500
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 7454.00, 7455.00, 7458.00 1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 680 42 55 DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
437
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Horizontal Beamwidth 65 70 70 70 80 80 90 90 90 90 90
Gain dBi dBd 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.0/11.9, 17.0/14.9 14.0/11.9, 17.0/14.9 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 14.0/11.9, 17.0/14.9
Tilt MET FET FET FET FET FET FET FET FET FET FET
Length 1.3m (4'3") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.3m (4'3")
Part Number 7840.00 7333.02B 7333.00B 7333.06B 7332.02B 7332.06B 7334.02B 7332.00B 7334.00B 7334.06B 7850.00B
Page 439 440 441 442 443 444 445 446 447 448 449
438
POWERWAVE
7840.00
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.5/12.4, 17.5/15.4 TILT: MET LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 824-896 14/11.9 Vertical linear 50 <1.4:1 73 15 0-12 >15 <0.5 >25 <-150 400 1850-1990 1850-1990 17.5/15.4 Vertical linear 50 <1.4:1 68 7 0-8 >15 -18 <0.5 >25 <-150 200
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1495x355x255 (411x12x10) 15.8 (34.8) 7256.00, 7454.00 2 x 7/16 DIN Female Bottom 1331x280x125 (44x11x5) Pre-mounted heavy duty brackets 17.5 (38.5) 12 (26.4) 388 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
439
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7333.02B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 2 >16/16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 71 7 2 >16/16 -17 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
440
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7333.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 0 >16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 70 7 0 >16 -17 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
441
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7333.06B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 6 >16/16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 71 7 6 >16/16 -17 <0.5 >28 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
442
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7332.02B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi dBd): 14.0/11.9, 17.0/14.9 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 81 15.5 2 >16 <0.5 >27 <-150 350 1850-1990 1850-1990 17.2/15.1 Vertical linear 50 <1.4:1 79 7 2 >16 -17 <0.5 >27 <-150 350
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
443
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7332.06B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi dBd): 14.0/11.9, 17.0/14.9 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 81 15.5 6 >16 <0.5 >27 <-150 350 1850-1990 1850-1990 17.2/15.1 Vertical linear 50 <1.4:1 79 7 6 >16 -17 <0.5 >27 <-150 350
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
444
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7334.02B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 13.5/11.4 Vertical linear 50 <1.4:1 89 15 2 >16/16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 2 >16/16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
445
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7332.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 13.5/12.4 Vertical linear 50 <1.4:1 89 15 2 >16 <0.5 >26 <-150 350 1850-1990 1850-1990 17.6/15.516.5/14.4 Vertical linear 50 <1.4:1 91 7 2 >16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
446
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7334.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 89 15 0 >16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 0 >16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
447
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7334.06B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 13.5/11.4 Vertical linear 50 <1.4:1 89 15 6 >16/16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 6 >16/16 -17 <0.5 >26 <-150 175
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00 1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
448
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7850.00B
POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 14.0/11.9, 17.0/14.9 TILT: 0-12/0-8 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 806-896 806-896 13.8/11.7 Vertical linear 50 <1.5:1 90 15 0-12 >18 <0.5 >26 <-150 400 1850-1990 1850-1990 16/13.9 Vertical linear 50 <1.5:1 90 6.5 0-8 >18 -18 <0.5 >26 <-150 200
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets GRP Light gray RAL 7035 on all visible plastic parts 1495x355x255 (411x12x10) 15.8 (34.8) 7256.00, 7454.00 2 x 7/16 DIN Female Bottom 1331x280x125 (44x11x5) Pre-mounted heavy duty brackets 17.5 (38.5) 12 (26.4) 388 42 (93) 55 (198) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
449
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
Power wave
The iRET antenna family is the next iteration of Powerwaves innovative antenna product line, which integrates remote electrical tilt functionality under the antenna radome, delivering maximized functionality and improved aesthetics, while eliminating installation and reliability issues that can occur with typical exterior RET modules.
iRET Antennas
POWERWAVE
iRET Antennas
Page Low Broadband Cross Polarized iRET Antennas, 698-894MHz Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 452 456 463 483 489 493 496
451
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized Low Broadband Cross Polarized iRET Antennas, 698-894 MHz
Horizontal Beamwidth 65 65 65
452
POWERWAVE
P65-15-XL-R
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.9/12.8 TILT: 0-13 LENGTH: 51 (1295mm)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 14.0/11.9 Dual Linear +/- 45 50 < 1.5:1 69 17.5 0 - 13 > 18 > 30 <2 < 0.5 > 24 > 19 > 18 > 10 <-153 500 1000 698-894 806-894 14.9/12.8 Dual Linear +/- 45 50 < 1.5:1 63 15.5 0 - 13 > 18 > 30 <2 < 0.5 > 24 > 18 > 18 >8 <-153 500 1000
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female,2xAISG [1x i-RET 8510.40] Bottom 1295 x 305 x 152 (51 x 12 x 6) Pole Mounting Bracket 15.3 (34) 11 (25) 920 45 (100) 67 (150) DC Ground -40C to +60C PVC Light Grey 1475 x 400 x 255 (58 x 16 x 10) 18.7 (41) iRET AISGv1.1, MET and AISGv2.0 Available 7253.00 Available as option
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
453
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-16-XL-R
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.0/13.9 TILT: 1-12 LENGTH: 72 (1829mm)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) > 18 > 30 <2 < 0.5 > 26 > 21 > 18 > 10 <-153 500 1000 69 14 1-12 > 18 > 30 <2 < 0.5 > 25 > 20 > 16 >9 698-806 15.2/13.1 Dual Linear +/- 45 50 < 1.5:1 62 12 698-894 806-894 16.0/13.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female, 2xAISG [1x i-RET 8510.40] Bottom 1829 x 305 x 152 (72 x 12 x 6) Pole Mounting Bracket 18.3 (40) 14 (31) 1380 45 (100) 67 (150) DC Ground -40 to +60 C PVC IP55 Light Grey 2082 x 400 x 255 (87 x 16 x 10) 22.9 (50) iRET AISGv1.1, MET and AISGv2.0 7253.00 Available as option
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
454
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-17-XL-R
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.5/15.4 TILT: 0-7 LENGTH: 96 (2438mm)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 16.6/14.5 Dual Linear +/- 45 50 < 1.5:1 67 9.0 0-7 > 18 > 30 < 2.0 < 0.5 > 24 > 19 > 18 > 9.0 <-153 500 1000 698-894 806-894 17.5/15.4 Dual Linear +/- 45 50 < 1.5:1 62 8.0 0-7 > 18 > 30 < 2.0 < 0.5 > 22 > 18 > 18 > 6.9 <-153 500 1000
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 X 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 2438 x 305 x 152 (96 x 12 x 6) Pre-mounted tilt brackets 24.1 (54) 20 (44) 1840 45 (100) 67 (150) DC Ground -40C to +60C PVC Light Grey 2725 x 400 x 255 (107 x 16 x 10) 29.7(65) iRET AISGv1.1, MET and AISGv2.0 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
455
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized Dual Broadband Cross Polarized iRET Antennas 698-894/1710-2170MHz
Gain dBi dBd 14.7/12.6, 17.0/14.9 15.5/13.4 17.5/15.4 17.2/15.1 17.5/15.4 13.7/11.6 15.7/13.6 14.5/12.4 16.3/14.2 16.1/14.0 16.3/14.2
Length 1.3m (51) 1.8m (72) 2.4m (96) 1.2m (48) 1.8m (72) 2.4m (96)
456
POWERWAVE
P65-15-XLH-RR
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 65, 65 GAIN (dBi dBd): 14.7/12.6, 17.0/14.9 TILT: 0-13, 0-9 LENGTH: 51
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 73 17 0-13 > 14 >30 > 40 <2 <1.25 > 25 > 25 > 15 > 10 <-153 500 1000 698-806 14/11.9 50 < 1.5:1 63 65 698-894 806-894 14.7/12.6 1710-1880 16.4/14.3 1710-2170 1850-1990 16.7/14.6 Dual Linear +/- 45 50 < 1.5:1 61 7.5 0-9 >20 > 30 > 40 <2 < 0.5 > 28 > 25 > 15 > 10 <-153 300 600 60 1900-2170 17.0/14,9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 X 7/16 DIN Female, IP67 Bottom 1290 x 312.5 x 147.5 (51x12x6) Pole Mounting Bracket 19 (41) 14 (30) 404 / 75 / 511 45 (100) 67 (150) DC Ground -40C to +60C PVC, IP55 Light Grey 1524 x 400 x 255 (60 x 16 x 10) 24 (52) iRET AISGv1.1, MET and AISGv2.0 7253.00 Available as option
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
457
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-16-XLH-RR
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 65, 65 GAIN (dBi dBd): 15.5/13.4 17.5/15.4 TILT: 1-12, 0-8 LENGTH: 72
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 500 1000 250 500 <-153 <-153 > 15 > 10 > 15 > 10 > 15 > 10 > 15 > 10 > 15 > 10 < 0.8 >24 < 0.8 >24 <2 > 16 >16 > 30 > 40 <2 >-20 < 0.5 > 30 66 14.7 1 to 12 >16 >16 > 30 > 30 > 30 > 40 <2 >-20 < 0.5 >30 <2 >-20 < 0.5 >28 > 16 698-806 14.8/12.7 50 < 1.5:1 65 12.5 60 6.8 698-894 806-894 15.5/13.4 1710-1880 16.9/14.8 1710-2170 1850-1990 17.2/15.1 Dual Linear +/- 45 50 < 1.5:1 63 6.4 0 to 8 63 5.7 1900-2170 17.5/15.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 X 7/16 DIN Female, IP67 Bottom 1829x312.5x147.5 (72x12x6) Pole Mounting Bracket 29 (64) 24 (53) 708 / 108 / 896 100 (45) 150 (67) DC Ground -40C to +60C PVC, IP55 Light Grey 2225 x 400 x 225 (87 x 16 x 10) 34 (75) iRET AISGv1.1, MET and AISGv2.0 7253.00 Available as Option
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
458
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-17-XLH-RR
POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 65, 65 GAIN (dBi dBd): 17.2/15.1 17.5/15.4 TILT: 0-7, 0-8 LENGTH: 96
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 70 8.4 0 to 7 > 16 > 30 > 40 <2 < 0.5 > 25 > 22 > 15 10 <-153 500 1000 <2 < 0.5 > 30 > 25 > 15 10 <-153 300 600 698-806 16.4/14.3 50 < 1.5:1 63 60 698-894 806-894 17.2/15.1 1710-1880 16.9/14.8 1710-2170 1850-1990 17.2/15.1 Dual Linear +/- 45 50 < 1.5:1 63 6.5 0 to 8 > 16 > 30 60 1900-2170 17.5/15.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 X 7/16 DIN Female Bottom 2439x312.5x147.5(96x12x6 ) Pre-mounted Tilt Brackets 32 (70) 27 (59) 1006 / 147 / 1273 45 (100 ) 67 (150) DC Ground -40 to +60C PVC Light Grey 2725 x 400 x 255(107 x 16 x 10) 37 (81) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
459
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P90-14-XLH-RR
POLARIZATION: Dual Linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 85,85 GAIN (dBi dBd): 13.7/11.6 15.7/13.6 TILT: 0-13, 0-9 LENGTH: 52
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 86 15.0 0-13 > 12 > 30 > 40 <2 < 1.25 > 25 > 22 > 10 > 10 <-153 500 1000 <2 < 0.5 > 25 > 22 > 15 > 10 <-153 300 600 698-806 13.0/10.9 50 < 1.5:1 83 85 698-894 806-894 13.7/11.6 1710-1880 15.1/13.0 1710-2170 1850-1990 15.4/13.3 Dual Linear +/- 45 50 < 1.5:1 84 7.0 0-9 > 16 > 30 85 1900-2170 15.7/13.6
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female, IP67 Bottom 1315 x 280 x 186 (52 x 11 x 7) Pole Mounting Bracket 19 (41) 14 (30) 388 / 195 / 466 45 (100) 67 (150) DC Ground -40C to +60C PVC, IP55 Light Grey 1500 x 400 x 255 (59 x 16 x 10 ) 24 (52) iRET AISGv1.1, MET and AISGv2.0 Available 7253.00 Available as option
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
460
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P90-15-XLH-RR
POLARIZATION: Dual Linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 90, 90 GAIN (dBi dBd): 14.5/12.4 16.3/14.2 TILT: 0-11, 0-8 LENGTH: 72
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 500 1000 300 600 <-153 <-153 < 0.8 25 22 > 15 10 < 0.8 25 22 > 15 10 < 0.5 > 23 > 22 > 15 10 < 0.5 > 27 > 22 > 15 10 < 0.5 > 30 > 22 > 15 10 <2 > 16 > 30 > 40 <2 <2 86 14 0 to 11 >16 > 30 >18 > 30 698-806 13.8/11.7 50 < 1.5:1 84 12 88 7 698-894 806-894 14.5/12.4 1710-1880 15.7/13.6 1710-2170 1850-1990 16.0/13.9 Dual Linear +/- 45 50 < 1.5:1 80 6.5 0 to 8 >17 > 30 > 40 <2 <2 >15 > 30 80 6 1900-2170 16.3/14.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female, IP67, 4 x AISG [2 x i-RET 8510.40] Bottom 1810 x 280 x 186 (72 x 11 x 7) Pole Mounting Bracket 22.3 (49) 18.6 (41) 575 / 281 / 690 45 (100) 67 (150) DC Ground -40C to +60C PVC, IP55 Light Grey 2000 x 421 x 366 (78 x 17 x 14) 28.2 (64) iRET AISGv1.1, MET and AISGv2.0 Available 7253.00 Available as Option
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
461
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P90-16-XLH-RR
POLARIZATION: Dual Linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 90, 90 GAIN (dBi dBd): 16.1/14.0 16.3/14.2 TILT: 0-7, 0-8 LENGTH: 96
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 500 1000 300 600 <-153 <-153 < 0.8 25 22 > 15 10 < 0.8 25 22 > 15 10 < 0.5 >21 > 22 > 15 10 < 0.5 >24 > 22 > 15 10 < 0.5 >27 > 22 > 15 10 <2 > 16 > 30 > 40 <2 <2 83 9 0-7 >16 > 30 >16 > 30 698-806 15.4/13.3 50 < 1.5:1 84 8.7 87 6 698-894 806-894 16.1/14.0 1710-1880 15.7/13.6 1710-2170 1850-1990 16.0/13.9 Dual Linear +/- 45 50 < 1.5:1 84 6.6 0-8 >16 > 30 > 40 <2 <2 >16 > 30 83 6 1900-2170 16.3/14.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female, Extended Shank Bottom 2448 x 280 x 186 (96x11x7) Pre-mounted Tilt Brackets 32 (70) 27 (59) 822 / 384 / 988 100 (45) 150 (67) DC Ground -40 to +70C PVC Light Grey 2725 X 400 X 255 (107 X 16 X 10) (37) 81 iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
462
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized Triple Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal Beamwidth
65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65
Gain dBi dBd 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 16.2/14.1, 16.5/14.4, 16.5/14.4 14.7/12.6, 14.6/12.5, 14.6/12.5 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4
Tilt
Length
Page
464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482
0-20/0-12/0-12 1.3m(43) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86)
463
POWERWAVE
8780.0ST.0000.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 >18,17,16,16@ 2,4,8,12 >30 >38 <2 25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 25 0.7 >28 >24 16 >6 < 0.55 71 14.9 0 - 20 >17,16,15,14@ 2,4,8,12 >30 >17,16,15,14@ 0,4,8,12 >30 824-894 14.1/12 50 <1.5:1 67 13.9 65 13.3 824-960 880-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 >30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12 1920-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 17.5 (38.6) 12 (26.4) 415 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1550x355x200 (51x12x7) 21.5 (47.4) No iRET module attached 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
464
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8780.0ST.B100.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 >18,17,16,16@ 2,4,8,12 >30 >38 <2 25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 25 0.7 >28 >24 16 >6 < 0.55 71 14.9 0 - 20 >17,16,15,14@ 2,4,8,12 >30 >17,16,15,14@ 0,4,8,12 >30 824-894 14.1/12 50 <1.5:1 67 13.9 65 13.3 824-960 880-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 >30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12 1920-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 6x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1550x355x200 (51x12x7) 23 (50.7) AISG1.1 (AISG2.0/Ericsson) 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
465
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8780.0ST.B100.04
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 >18,17,16,16@ 2,4,8,12 >30 >38 <2 25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 25 0.7 >28 >24 16 >6 < 0.55 71 14.9 0 - 20 >17,16,15,14@ 2,4,8,12 >30 >17,16,15,14@ 0,4,8,12 >30 824-894 14.1/12 50 <1.5:1 67 13.9 65 13.3 824-960 880-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 >30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12 1920-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets ASA Light Grey 1550x355x200 (51x12x7) 22.5 (49.6) AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system 7256.00, 7454.00A 6x 7/16 DIN Female 4x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18.5 (40.9) 13 (28.6) 415 42 (93) 55 (123) DC grounded
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
466
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8780.0ST.B400.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 >18,17,16,16@ 2,4,8,12 >30 >38 <2 25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 25 0.7 >28 >24 16 >6 < 0.55 71 14.9 0 - 20 >17,16,15,14@ 2,4,8,12 >30 >17,16,15,14@ 0,4,8,12 >30 824-894 14.1/12 50 <1.5:1 67 13.9 65 13.3 824-960 880-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 >30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12 1920-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 6x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1550x355x200 (51x12x7) 23 (50.7) AISG2.0 (AISG1.1/Ericsson) 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
467
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8780.0ST.B400.02
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 >18,17,16,16@ 2,4,8,12 >30 >38 <2 25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 25 0.7 >28 >24 16 >6 < 0.55 71 14.9 0 - 20 >17,16,15,14@ 2,4,8,12 >30 >17,16,15,14@ 0,4,8,12 >30 824-894 14.1/12 50 <1.5:1 67 13.9 65 13.3 824-960 880-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 >30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12 1920-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 2x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18 (39.6) 12.5 (27.5) 415 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1550x355x200 (51x12x7) 22 (48.5) AISG2.0 (AISG1.1/Ericsson) on WHITE system 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
468
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8780.0ST.B400.04
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153 >18,17,16,16@ 2,4,8,12 >30 >38 <2 25 0.7 >28 >24 14 >7.7 < 0.50 <1.5 25 0.7 >28 >24 16 >6 < 0.55 71 14.9 0 - 20 >17,16,15,14@ 2,4,8,12 >30 >17,16,15,14@ 0,4,8,12 >30 824-894 14.1/12 50 <1.5:1 67 13.9 65 13.3 824-960 880-960 14.7/12.6 1710-1880 14.4/12.3 2x1710-2170 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 64 12.6 0 - 12 >17,16,15,14@ 0,4,8,12 >30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500 <4 25 1 >28 >24 18 > 5.5 < 0.74 >17,16,15,14@ 0,4,8,12 >30 64 12 1920-2170 14.8/12.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 4x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18.5 (40.9) 13 (28.6) 415 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1550x355x200 (51x12x7) 22.5 (49.6) AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
469
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.0000.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0-12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0-12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 21.9 (48.2) 16.4 (36.1) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 26.5 (58.4) No iRET module attached 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
470
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.B100.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0-12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0-12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 6x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 23.4 (48) 17.9 (39) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 28 (61.7) AISG1.1 (AISG2.0/Ericsson) 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
471
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.B100.02
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0 - 12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0 - 12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 2x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 22.4 (49.3) 16.9 (37.2) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 27 (59.5) AISG1.1 (AISG2.0/Ericsson) on WHITE system 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
472
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.B100.04
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0 - 12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0 - 12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 4x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 22.9 (50.4) 17.4 (38.3) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 27.5 (60.6) AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
473
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.B400.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0 - 12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0 - 12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 6x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 23.4 (48) 17.9 (39) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 28 (61.7) AISG2.0 (AISG1.1/Ericsson) 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
474
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.B400.02
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0 - 12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0 - 12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 2x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 22.4 (49.3) 16.9 (37.2) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 27 (59.5) AISG2.0 (AISG1.1/Ericsson) on WHITE system 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
475
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8782.0ST.B400.04
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 >18,17,16,16@ 2,5,7,8 >30 >34 <1 25 0.5 >30 >26 15 >9.2 <0.47 <1.5 25 0.5 >27 >25 16 >6.7 <0.52 71 9.6 0 - 12 >18,17,16,16@ 2,5,7,8 >30 >17,15,13@ 0,6,10 >30 824-894 15.8/13.7 50 <1.5:1 67 8.6 65 10 824-960 880-960 16.2/14.1 1710-1880 16.0/13.9 2x1710-2170 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 65 9.4 0 - 12 >17,15,14@ 0,6,10 >30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500 <4 25 0.5 >30 >27 15 >6.3 <0.66 >17,16,15@ 0,6,10 >30 63 8.7 1920-2170 16.5/14.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 4x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted heavy duty brackets 22.9 (50.4) 17.4 (38.3) 653 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 2175x355x255 (72x14x10) 27.5 (60.6) AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system 7256.00,7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
476
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8785.0ST.0000.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153 >17 30 38 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47 65 7 0-10 >17 30 >17 30 824-894 17.4/15.3 50 <1.5:1 65 7 65 7 824-960 880-960 17.4/15.3 1710-1880 17.2/15.1 2x1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 0-10 >17 30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52 >17 30 62 6 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 26.2(57.7) 20.7(45.6) 880 42(93) 55(123) DC Grounded -40C to +60C ASA Light Gray 2800x355x255(92x12x10) 31.5(69.4) No iRET module attached 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
477
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8785.0ST.B100.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153 >17 30 38 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47 65 7 0-10 >17 30 >17 30 824-894 17.4/15.3 50 <1.5:1 65 7 65 7 824-960 880-960 17.4/15.3 1710-1880 17.2/15.1 2x1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 0-10 >17 30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52 >17 30 62 6 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 6x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.7(61) 22.2(49) 880 42(93) 55(123) DC Grounded -40C to +60C ASA Light Gray 2800x355x255(92x12x10) 33(72.7) AISG1.1 (AISG2.0/Ericsson) 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
478
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8785.0ST.B100.04
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153 >17 30 38 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47 65 7 0 - 10 >17 30 >17 30 824-894 17.4/15.3 50 <1.5:1 65 7 65 7 824-960 880-960 17.4/15.3 1710-1880 17.2/15.1 2x1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 0 - 10 >17 30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52 >17 30 62 6 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 4x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.2(59.9) 21.7(47.8) 880 42(93) 55(123) DC Grounded -40C to +60C ASA Light Gray 2800x355x255(92x12x10) 32.5(71.7) AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
479
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8785.0ST.B400.00
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153 >17 30 38 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47 65 7 0 - 10 >17 30 >17 30 824-894 17.4/15.3 50 <1.5:1 65 7 65 7 824-960 880-960 17.4/15.3 1710-1880 17.2/15.1 2x1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 0 - 10 >17 30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52 >17 30 62 6 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 6x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.7(61) 22.2(49) 880 42(93) 55(123) DC Grounded -40C to +60C ASA Light Gray 2800x355x255(92x12x10) 33(72.7) AISG2.0 (AISG1.1/Ericsson) 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
480
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8785.0ST.B400.02
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153 >17 30 38 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47 65 7 0 - 10 >17 30 >17 30 824-894 17.4/15.3 50 <1.5:1 65 7 65 7 824-960 880-960 17.4/15.3 1710-1880 17.2/15.1 2x1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 0 - 10 >17 30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52 >17 30 62 6 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 2x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 26.7(58.8) 21.2(46.7) 880 42(93) 55(123) DC Grounded -40C to +60C ASA Light Gray 2800x355x255(92x12x10) 32(70.5) AISG2.0 (AISG1.1/Ericsson) on WHITE system 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
481
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8785.0ST.B400.04
POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153 >17 30 38 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47 65 7 0 - 10 >17 30 >17 30 824-894 17.4/15.3 50 <1.5:1 65 7 65 7 824-960 880-960 17.4/15.3 1710-1880 17.2/15.1 2x1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 0 - 10 >17 30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52 >17 30 62 6 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 6x 7/16 DIN Female 4x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.2(59.9) 21.7(47.8) 880 42(93) 55(123) DC Grounded -40C to +60C ASA Light Gray 2800x355x255(92x12x10) 32.5(71.7) AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
482
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal Beamwidth 65 65 65 65 65
483
POWERWAVE
8720.0ST.B400.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15.6/13.5 TILT: 0-16 LENGTH: 0.7m(23)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 <-153 <-153 <-160 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29, typical >-25 0.5 >30 >25 >15 >15 67 14.1 1710-1880 15/12.9 1710-2170 1850-1990 15.1/13 Dual Linear 45 50 <1.4:1 65 13.5 0-16 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29, typical >-25 0.5 >30 >25 >15 >15 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29, typical >-25 0.5 >30 >25 >15 >13 64 12.5 1920-2170 15.6/13.5
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 8.2 (18) 4.5 (9.9) 133 / 31 / 155 42 (93) 70 (156) DC Grounded -40C to +60C ASA Light Grey 880x200x200 (211x8x8) 11.5 (25.3) AISG2.0 (AISG1.1/Ericsson) 7456.00A,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
484
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8721.0ST.B400.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.3/16.2 TILT: 0-10 LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 <-153 <-153 <-160 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >18 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >19 >14 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >20 >12 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1309x167x89.5 mm (43x6x3) Pre-mounted standard brackets 11(24) 7.3(16) 285 / 60 / 333 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200mm (410x8x8) 14.7 (32.4) AISG2.0 (AISG1.1/Ericsson) 7456.00A,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
485
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8722.0ST.B400.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 19.5/17.4 TILT: 0-6 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 <-153 <-153 <-160 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >19 >20 67 4.7 1710-1880 19.0/16.9 1710-2170 1850-1990 19.2/17.1 Dual Linear 45 50 <1.4:1 66 4.4 0-6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >19 >17 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >21 >12 65 4.2 1920-2170 19.5/17.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1934 x 167 x 89.5 (64 x 6 x 3) Pre-mounted standard brackets 14 (31) 8.5 (18.7) 423 / 90 / 494 42 (93) 55 (123) DC Grounded -40C to +60C ASA Light Grey 2105 x 200 x 200 (611 x 8 x 8) 15.5 (34.1) AISG2.0 (AISG1.1/Ericsson) 7456.00A,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
486
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8721.0ST.0000.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.3/16.2 TILT: 0-10 LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W)
No iRET module attached [8510.40]
1710-2170 1710-1880 17.6/15.5 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 67 7.0 66 6.6 0-10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >18 <-153 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >19 >14 <-153 <-160 250 500 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >20 >12 64 6.3 1920-2170 18.3/16.2
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2x7/16 DIN Female Bottom 1309x167x89.5 mm (43x6x3) Pre-mounted standard brackets 10.5(23.1) 6.8(15) 285 / 60 / 333 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Gray 1480x200x200mm (410x8x8) 14.2 (31.3) No iRET module attached [8510.40] 7456.00A,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
487
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8722.0ST.0000.00
POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 19.5/17.4 TILT: 0-6 LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W)
No iRET module attached [8510.40]
1710-2170 1710-1880 19.0/16.9 1850-1990 19.2/17.1 Dual Linear 45 50 <1.4:1 67 4.7 66 4.4 0-6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >19 >20 <-153 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >19 >17 <-153 <-160 250 500 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >21 >12 65 4.2 1920-2170 19.5/17.4
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2x 7/16 DIN Female Bottom 1934 x 167 x 89.5 (64 x 6 x 3) Pre-mounted standard brackets 13.5 (29.7) 8 (17.6) 423 / 90 / 494 42 (93) 55 (123) DC Grounded -40C to +60C ASA Light Gray 2105 x 200 x 200 (611 x 8 x 8) 15 (33) No iRET module attached 7456.00A,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
488
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized Dual High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal Beamwidth 65 65 65
489
POWERWAVE
8760.0ST.B100.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-10 LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-153 <-160 <-153 <-160 250 1000 <-153 <-160 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >16 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >13 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >20 >10 64 6.2 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40] Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 529 / 63 / 615 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 23.5 (51.8) AISG1.1 (AISG2.0/Ericsson) 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
490
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8760.0ST.B400.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-10 LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W)
Daisy chain cable included
1710-2170 1710-1880 17.7/15.6 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 67 7.1 65 6.8 0-10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >16 <-153 <-160 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >13 <-153 <-160 250 1000 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >20 >10 <-153 <-160 64 6.2 1920-2170 18.1/16.0
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40] Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 529 / 63 / 615 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 23.5 (51.8) AISG2.0 (AISG1.1/Ericsson) 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
491
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8760.0ST.0000.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.1/16.0 TILT: 0-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-153 <-160 <-153 <-160 250 1000 <-153 <-160 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >16 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >13 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >20 >10 64 6.2 1920-2170 18.1/16
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 18.5 (40.8) 13 (28.6) 529 / 63 / 615 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 22.5 (49.6) No iRET module attached [8510.40] 7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
492
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz
Horizontal Beamwidth 65 65
493
POWERWAVE
P65-18-XHW2-RR
POLARIZATION: XX-Pol FREQUENCY (MHz): 2500-2690, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9, 18.0/15.9 TILT: 0-10/0-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2500-2690 2500-2690 18.0/15.9 Dual linear 45 50 <1.5:1 65 5.7 0 - 10 >20,18,15 @ 0,5,10 >30 >35 <2 >-24 typical >-17 0.5 >27 >26 >15 >10 <-153 250 500 <2 >-20 typical >-17 0.5 >30 >27 >17 >18 65 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.5:1 65 6.6 0 - 10 >20,20,20,20,18,18 @ >20,20,20,20,18,18 @ >20,20,20,20,18,18 @ 0,2,4,6,8,10 0,2,4,6,8,10 0,2,4,6,8,10 >30 >30 >35 <2 >-20 typical >-17 0.5 >30 >27 >17 >14 <-153 <-160 250 500 <2 >-20 typical >-17 0.5 >30 >27 >17 >10 >30 65 6.3 1900-2170 18.0/15.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40] Bottom 1320x343x100 (52x13.5x4) Pre-mounted heavy duty brackets 19.5 (42.9) 14.0 (30.8) 529/63/615 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1430x400x200 (56x16x8) 23.5 (51.8) 2xiRET 8510.40 AISGv2.0/3GPP 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
494
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-18-XHW2-MM
POLARIZATION: XX-Pol FREQUENCY (MHz): 2500-2690, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9, 18.0/15.9 TILT: 0-10/0-10 LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2500-2690 2500-2690 18.0/15.9 Dual linear 45 50 <1.5:1 65 5.7 0 - 10 >20,18,15 @ 0,5,10 >30 >35 <2 >-24 typical >-17 0.5 >27 >26 >15 >10 <-153 250 500 <2 >-20 typical >-17 0.5 >30 >27 >17 >18 65 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.5:1 65 6.6 0 - 10 >20,20,20,20,18,18 @ >20,20,20,20,18,18 @ >20,20,20,20,18,18 @ 0,2,4,6,8,10 0,2,4,6,8,10 0,2,4,6,8,10 >30 >30 >35 <2 >-20 typical >-17 0.5 >30 >27 >17 >14 <-153 <-160 250 500 <2 >-20 typical >-17 0.5 >30 >27 >17 >10 >30 65 6.3 1900-2170 18.0/15.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 4x 7/16 DIN Female Bottom 1320x343x100 (52x13.5x4) Pre-mounted heavy duty brackets 18.5 (40.9) 13.0 (28.8) 529/63/615 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1430x400x200 (56x16x8) 22.5 (49.8) No iRET modules attached [8510.10] 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
495
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
iRET Antennas
Cross Polarized Dual High Broadband Cross Polarized iRET 2300-2700MHz
Horizontal Beamwidth 65 65 90 90
496
POWERWAVE
P65-18-XXW2-R
POLARIZATION: XX-Pol FREQUENCY (MHz): 2496-2690 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9 TILT: 0-10 LENGTH: 1.2m(48)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Gain (dBi/dBd) Electrical down tilt () Nominal Impedance () Return Loss (dB) Side lobe suppression, vertical 1st upper (dB) Port Isolation (dB) Front to back ratio @ 180 30 Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) IM3, 2xTx&43dBm @ 2 minute duration(dBc) HBW Squint across the same band ports ( X) Power handling, average per input (W) Power handling, average total (W) 2496-2690 2496-2690 65 5.5 18.0/15.9 0-10 50 <-14 <18,16,15 @ 0,5,10 >30 >27 >15 >10 <-110 +/- 4 250 1000
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 4x7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1209x343x89 (4x11x3) Pre-mounted heavy duty brackets [7456.00] 17.0 (38.0) 12.0 (26.0) 546/66/636 42(93) 70(156) DC Grounded -40C to +60C PVC Light Grey 1430x400x200 (56x16x8) 20.6(45) 7256.00, 7454.00A, 7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
497
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P65-18-XXW2-M
POLARIZATION: XX-Pol FREQUENCY (MHz): 2300-2690** HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 18.0/15.9 TILT: 0-10 LENGTH: 1.2m(48)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2300-2690** 2300-2690 18.0/15.9 2 x Dual Linear 45 50 <1.5:1 65 5.5 0-10 <18,16,15 @ 0,5,10 >-24, typical >-18 0.5 >27 >25 >15 >10 n.a. <-153 250 1000
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 4x7/16 DIN Female [No i-RET module attached] Bottom 1209x343x89 (4x11x3) Pre-mounted heavy duty brackets [7456.00] 17.0 (38.0) 12.0 (26.0) 476 / 58 / 538 42(93) 70(156) DC Grounded -40C to +60C ASA Light Grey 1430x400x200 (56x16x8) 20.6(45) 7256.00, 7454.00A, 7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
498
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P90-17-XXW2-R
POLARIZATION: XXPol FREQUENCY (MHz): 2300-2690 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.1 (Average) TILT: 0-10 LENGTH: 1.2M (48)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2300-2690 2300-2690 16.1 (Average) 2 x Dual linear 45 50 <1.5:1 90 +/- 6 5.5 0-10 12 @ 0, 17 @ 5, 15 @ 10 >-24,typical>-18 <1.0 +/- .5 >30 @ 180 >25 @ +/-30 cone >15 >10 N/A <-153 250 1000
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 4 x 7/16 DIN Female, 2 x AISG [1x8510.40] Bottom 1219 x 343 x 100 (48 x 13.5 x 3.9) Pre-mounted heavy duty brackets 19.5 (44) 14.2 (32) 520 42 (93) 55 (123) DC Grounded -30 to +70C ASA Light Grey 1430 x 400 x 200 (48 x 13 x 8) 20 (45) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
499
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P90-17-XXW2-M
POLARIZATION: XXPol FREQUENCY (MHz): 2496-2690 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi dBd): 16.1 (Average) TILT: 0-10 LENGTH: 1.2M (48)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 coplanar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD)60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2496-2690 2496-2690 16.1 (Average) 2 x Dual linear 45 50 <1.5:1 90 +/- 6 5.5 0-10 12 @ 0, 17 @ 5, 15 @ 10 >-24,typical>-18 <1.0 +/- .5 >30 @ 180 >25 @ +/-30 cone >15 >10 N/A <-153 250 1000
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets 4 x 7/16 DIN Female Bottom 1219 x 343 x 100 (48 x 13.5 x 3.9) Pre-mounted heavy duty brackets 19.5 (44) 14.2 (32) 520 42 (93) 55 (123) DC Grounded -30 to +70C ASA Light Grey 1430 x 400 x 200 (48 x 13 x 8) 20 (45) 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
500
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
iDiplexer Antennas
Power wave
iDiplexer antennas combine the performance of Powerwaves high performing multiband antenna line and external diplexer into one product. iDiplexed antennas offer a reduced amount of connectors and feeder lines to customers who are limited in adding additional feeders due to windload and space limitation on towers. Customers can rapidly deploy an additional overlay network by just exchanging the existing antennas with iDiplexed antennas and reusing the existing feeders. iDiplexed antennas usually combine the low band and high band frequencies into a single pair of connectors, still keeping the independent variable downtilt capability.
iDiplexer Antennas
POWERWAVE
iDiplexer Antennas
iDiplexer Antennas
Cross Polarized Multi Broadband Cross Polarized Antennas
Horizontal Beamwidth 65 65 65
Tilt Length MET (with Integrated 2.6m (86) Diplexer) MET (with Integrated 2.0m (66) Diplexer) MET (with Integrated 1.4m (47) Diplexer)
502
POWERWAVE
iDiplexer Antennas
7755.0ST.0002.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 17.3/15.2, 17.8/15.7 TILT: MET (with Integrated Diplexer) LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600 2,4,6,8 30 38 <1.0 >-25 0.5 >30 >25 14 > 9.5 <0.41 <1.5 >-25 0.5 >30 >25 16 > 6.3 <0.53 71 7.4 2 to 8 >18,18,17,16,16@ >18,18,17,16,16@ 2,4,6,8 30 >17,16,15,14,13@ 2,4,6,8 30 824-896 16.6/14.5 50 1.5:1 67 7.0 65 6.9 824-960 880-960 17.3/15.2 1710-1880 17.3/15.2 1710-2170 1850-1990 17.6/15.5 Dual linear 45 50 1:5:1 65 6.4 0 to 8 >17,17,16,15,14@ 2,4,6,8 30 <1 >-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 500 <3.5 >-25 0.5 >30 >25 16 >7.5 <0.58 >17,17,16,15,14@ 2,4,6,8 30 62 6.1 1900-2170 17.8/15.7
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 880 42 (93) 55 (123) DC grounded -40C to +60C GRP 2800x355x255 (92x12x10) Light Grey 32.5 (71.6) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
503
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
iDiplexer Antennas
7752.0ST.0002.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 16.7/14.6, 17.4/15.3 TILT: MET (with Integrated Diplexer) LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 <1 >30 >25 >16 > 12 <0.26 <-153 300 600 >17,16,15,14 @ 2,4,6,8 >30 <1.0 >-25 <1 >30 >25 >15 > 9.5 <0.39 <1.5 >-25 <1 >30 >25 >16 > 6.2 <0.5 71 9.6 2-9 >17,16,15,14 @ 2,4,6,8 >30 >18,17,15,14 @ 0,2,4,8 >30 824-896 15.7/14.0 50 1.5:1 67 8.9 63 7 824-960 880-960 16.6/14.5 1710-1880 17.0/14.9 1710-2170 1850-1990 17.2/15.1 Dual linear 45 50 1.5:1 63 7 0-8 >18,17,15,14 @ 0,2,4,8 >18,17,15,14 @ 0,2,4,8 0,2,4,8 >30 <1.5 >-25 <1 >30 >25 >16 >6.5 <0.59 <-153 <-160 250 500 <1.5 >-25 <1 >30 >25 >16 > 7.5 <0.59 0,2,4,8 >30 60 6.2 1920-2170 17.5/15.4
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted heavy duty bracket 19.8 (44) 16.0 (35) 653 42 (93) 70 (156) DC grounded -40C to +60C GRP Grey (RAL 7035 on all visible plastic parts) 2175x355x255 (72x14x10) 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
504
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
iDiplexer Antennas
7750.0ST.0002.00
POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi dBd): 15/12.9, 18/15.9 TILT: MET (with Integrated Diplexer) LENGTH: 1.4M
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 180 30 copolar Front to back ratio (dB) 180 30 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx&43dBm (dBc) IM7, 2xTx&43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >20 <1 >26 >26 >17 >11 <-153 NA 300 600 >21,20,17,16 @ 2,4,8,12 >30 40 <1.0 >20 <1 >26 >26 >17 >11 <1.5 >20 <1 >30 >25 >18 >10 <1.5 >20 <1 >30 >25 >18 >10 <-153 <-160 250 500 <1.5 >20 <1 >30 >25 >18 >10 68 3 14 2 - 12 >21,20,17,16 @ 2,4,8,12 >30 >18,17,15,14 @ 0,2,4,8 >30 824-880 15/12.9 50 >1.5:1 68 3 14 67 2 7 824-960 880-960 15/12.9 1710-1880 17.3/15.2 1710-2170 1850-1990 17.3/15.2 Dual linear 45 50 >1.5:1 67 2 7 0-8 >18,17,15,14 @ 0,2,4,8 >30 >18,17,15,14 @ 0,2,4,8 >30 62 4 6.2 1920-2170 18/15.9
Dual linear 45
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs) Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N) Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome Material Radome colour Packing size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets 2 x 7/16 DIN Female Bottom 1408x280x125mm (49x11x5) Pre Mounted Heavy Duty Brackets 18 (39.6) 14.3 (31.5) 435 42 (93) 56 (123) DC Grounded -40C to +60C GRP Grey (RAL 7035 on all visible plastic parts) 1550x355x255mm (61x14x10) 23 (50.6) 8210.40, 8210.10, 8220.40, 8220.10 7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
505
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Power wave
The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a master control unit (MCU) that controls the antenna line devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
POWERWAVE
RET Single Band RET Dual Band RET Triple Band RET iRET Antenna Controller Module iRET 8510 Master Control Units MCU Current Injector Layer One Converter CILOC RET System Cables RET System Cables
Page 508 517 520 Page 523 Page 526 Page 533 Page 538
507
POWERWAVE
Standard AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG1.1 (AISG V2.0/3GPP, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V2.0/3GPP (AISG1.1, Ericsson configurable)
Page 509
+10 to +30 V
<1mC
19V
8210.10
510
+10 to +30 V
<1mC
19V
8210.40
511
+10 to +30 V
<1mC
19V
8110.10
512
508
POWERWAVE
8110.40
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8110.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
509
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8210.10
Single Band RET for Multiband Antennas (Controlling white antenna array)
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8210.10 AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s
510
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8210.40
Single Band RET for Multiband Antennas (Controlling white antenna array)
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8210.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
511
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8110.10
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8110.10 AISG1.1 (AISG V2.0/3GPP , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
512
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8212.10
Single Band RET for Multiband Antennas (Controlling blue antenna array)
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8212.10 AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s
513
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8212.40
Single Band RET for Multiband Antennas (Controlling blue antenna array)
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8212.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
514
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8211.10
Single Band RET for Multiband Antennas (Controlling red antenna array)
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8211.10 AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s
515
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8211.40
Single Band RET for Multiband Antennas (Controlling red antenna array)
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8211.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
516
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Page 518
+10 to +30 V
<1mC
19V
8220.10
519
517
POWERWAVE
8220.40
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8220.40 AISG V2.0/3GPP (AISG1.1) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
518
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8220.10
DualBand RET
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8220.10 AISG v1.1 (AISG V2.0/3GPP) +10 to +30 V <1mC <400mA at Vin ,19V, <250mA at Vin>19V <100mA at Vin <19V, <50mA at Vin>19V 9.6kbps <0.8mm -40 to +65C Conformity with the relevent provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500,000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s
519
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Page 521
+10 to +30 V
<1mC
19V
8230.10
522
520
POWERWAVE
8230.40
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8230.40 AISG V2.0/3GPP (AISG1.1) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
521
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8230.10
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8230.10 AISG v1.1 (AISG V2.0/3GPP) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s
522
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Standard AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG V2.0/3GPP (AISG1.1, Ericsson configurable)
Page 524
+10 to +30 V
<1mC
19V
8510.40
525
523
POWERWAVE
8510.10
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8510.10 AISG1.1 (AISG V2.0/3GPP , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps NA -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 0.33 kg 125 x 65 x 26 (excluding connectors) Grounded Via Antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system
524
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
8510.40
ELECTRICAL SPECIFICATIONS* Product Number Standard Power Supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8510.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps NA -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.
MECHANICAL SPECIFICATIONS* Weight Dimensions (W, L, H)(mm) Connector Protection Ground Connector AISG Ingress protection Environmental 0.33 kg 125 x 65 x 26 (excluding connectors) Grounded Via Antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system
525
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Type Master Control Unit Master Control Unit Master Control Unit Layer One Converter Master Control Unit Layer One Converter Master Control Unit Layer One Converter Master Control Unit
Current Consumption 115/230 VAC 1.7 / 1.0A 24V / <5.0A 48V / <2.5A 115/230 VAC 1.7 / 1.0A 24V / <5.0A 48V / <2.5A
Part Number 7070.10 (AC) 7070.30 (24 V) 7070.50 (-48V) 7072.10 (AC) 7072.30 (24 V) 7072.50 (-48V)
526
POWERWAVE
7070.10 (AC)
ELECTRICAL SPECIFICATIONS Power Supply AC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors LOCAL ALARM PORTS (IN port) Output voltage at open Output current at closed LOCAL CONTROL PORTS (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions ENVIRONMENTAL SPECIFICATIONS DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local Alarm Type Approvals MTBF Operating Temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations* 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm 5 1 V 5 2mA AC 115/230 VAC 1.7 / 1.0A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
527
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7070.30 (24 V)
ELECTRICAL SPECIFICATIONS Power Supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors LOCAL ALARM PORTS (IN port) Output voltage at open Output current at closed LOCAL CONTROL PORTS (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions ENVIRONMENTAL SPECIFICATIONS DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local Alarm Type Approvals MTBF Operating Temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations* 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm 5 1 V 5 2mA 24V 24V / <5.0A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
528
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7070.50 (-48V)
ELECTRICAL SPECIFICATIONS Power Supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors LOCAL ALARM PORTS (IN port) Output voltage at open Output current at closed LOCAL CONTROL PORTS (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions ENVIRONMENTAL SPECIFICATIONS DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local Alarm Type Approvals MTBF Operating Temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations* 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm 5 1 V 5 2mA -48V 48V / <2.5A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
529
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7072.10 (AC)
ELECTRICAL SPECIFICATIONS Power Supply AC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors LOCAL ALARM PORTS (IN port) Output voltage at open Output current at closed LOCAL CONTROL PORTS (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions ENVIRONMENTAL SPECIFICATIONS DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local Alarm Type Approvals MTBF Operating Temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male SMA (female) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations* 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm 5 1 V 5 2mA AC 115/230 VAC 1.7 / 1.0A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
530
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7072.30 (24 V)
ELECTRICAL SPECIFICATIONS Power Supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors LOCAL ALARM PORTS (IN port) Output voltage at open Output current at closed LOCAL CONTROL PORTS (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions ENVIRONMENTAL SPECIFICATIONS DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local Alarm Type Approvals MTBF Operating Temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male SMA (female) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations* 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm 5 1 V 5 2mA 24V 24V / <5.0A +24 V DC 1.16 A 3.48 A 54 mC during <10 ms
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
531
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7072.50 (-48V)
ELECTRICAL SPECIFICATIONS Power Supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors LOCAL ALARM PORTS (IN port) Output voltage at open Output current at closed LOCAL CONTROL PORTS (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions ENVIRONMENTAL SPECIFICATIONS DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local Alarm Type Approvals MTBF Operating Temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male SMA (female) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations* 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm 5 1 V 5 2mA -48V 48V / <2.5A +24 V DC 1.16 A 3.48 A 54 mC during <10 ms
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
532
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Frequency Range (MHz) 806-960 MHz and 1710-2180 MHz 806-960 MHz and 1710-2180 MHz 698-960 MHz and 1710-2180 MHz
698-960 MHz and 1710-2180 MHz
Insertion Loss Return Loss Return Loss (dB) (dB) ANT Port (dB) BTS Port Part Number <0.2 dB <0.2 dB <0.2 dB <0.2 dB >20 dB >20 dB >20 dB >20 dB >20 dB >20 dB >20 dB >20 dB 7060.00 (ANT) 7060.10 (BTS) 7060.05 (ANT) 7060.15 (BTS)
533
POWERWAVE
7060.00 (ANT)
ELECTRICAL DATA Range (MHz) Frequency Range Insertion Loss (dB) Return Loss (dB) ANT Port Return Loss (dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling (dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link (MHz) Down-Link (MHz) Power Consumption MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight (kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 ENVIRONMENTAL SPECIFICATIONS Operating Temperature (C) MTBF Ingress Protection APPROVALS AND TESTS Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG -40 to +65 C > 500,000 hrs IP65 <48 x 92 x 80 <750 g DIN 7/16 female/ male IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A 806-960 MHz and 1710-2180 MHz 806-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA 1.3A 9.6 kbps, 38.4 kbps 1850-1910 1930-1990 N/A
534
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7060.10 (BTS)
ELECTRICAL DATA Range (MHz) Frequency Range Insertion Loss (dB) Return Loss (dB) ANT Port Return Loss (dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling (dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link (MHz) Down-Link (MHz) Power Consumption MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight (kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 ENVIRONMENTAL SPECIFICATIONS Operating Temperature (C) MTBF Ingress Protection APPROVALS AND TESTS Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG -40 to +65 C > 500,000 hrs IP65 <48 x 92 x 80 <750 g DIN 7/16 female/ male IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A 806-960 MHz and 1710-2180 MHz 806-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA 1.3A 9.6 kbps, 38.4 kbps 1850-1910 1930-1990 N/A
535
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7060.05 (ANT)
ELECTRICAL DATA Range (MHz) Frequency Range Insertion Loss (dB) Return Loss (dB) ANT Port Return Loss (dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling (dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link (MHz) Down-Link (MHz) Power Consumption MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight (kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 ENVIRONMENTAL SPECIFICATIONS Operating Temperature (C) MTBF Ingress Protection APPROVALS AND TESTS Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG -40 to +65 C > 500,000 hrs IP65 <48 x 92 x 80 <750 g 7/16 Male/BTS, Female/ANT side IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A N/A 698-960 MHz and 1710-2180 MHz 698-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA 1.3A 9.6 kbps, 38.4 kbps
536
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7060.15 (BTS)
ELECTRICAL DATA Range (MHz) Frequency Range Insertion Loss (dB) Return Loss (dB) ANT Port Return Loss (dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling (dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link (MHz) Down-Link (MHz) Power Consumption MECHANICAL SPECIFICATIONS Dimension HxWxD mm(ft) Weight (kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 ENVIRONMENTAL SPECIFICATIONS Operating Temperature (C) MTBF Ingress Protection APPROVALS AND TESTS Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG -40 to +65 C > 500,000 hrs IP65 <48 x 92 x 80 <750 g 7/16 Female/BTS, Male/ANT side IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A N/A 698-960 MHz and 1710-2180 MHz 698-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA 1.3A 9.6 kbps, 38.4 kbps
537
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Conductor Area 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2) 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)
Page 539
3.5 A
7095.XX
540
538
POWERWAVE
7085.XX
SPECIFICATIONS* Product Number Continuous Current DC Ports Connectors AISG Output Input Operation Temperature Range Conductor Area Type Approvals Ingress Protection Environmental Color 7085.XX 3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2) Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG IP67 mated ETSI 300 019 Black
RET short cable 0.5m RET short cable 1.5m RET short cable 3.0m RET short cable 5.0m
8-Pin Connector
+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected
+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected
539
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7095.XX
SPECIFICATIONS* Product Number Continuous Current DC Ports Connectors AISG Output Input Operation Temperature Range Conductor Area Type Approvals Ingress Protection Environmental Color 7095.XX 3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65C 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2) Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG IP67 mated ETSI 300 019 Black
7095.10 7095.20 7095.30 7095.40 7095.50 7095.60 7095.70 7095.80 7095.90 7095.110
RET long cable 10m RET long cable 20m RET long cable 30m RET long cable 40m RET long cable 50m RET long cable 60m RET long cable 70m RET long cable 80m RET long cable 90m RET long cable 110m
8-Pin Connector
+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected
+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected
540
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Indoor Antennas
Power wave
The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2700 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design beats using numerous antennas of unsightly size and appearance especially with todays aesthetic concerns.
Indoor Antennas
POWERWAVE
Indoor Antennas
Indoor Dual Band Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/850-990 MHz Indoor Multiband Antennas Vertical Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz Page 545 Page 543
542
POWERWAVE
Horizontal Beamwidth 70
Tilt 0
Page 544
543
POWERWAVE
7999.00
POLARIZATION: X-Pol FREQUENCY (MHz): 800/1900 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi dBd): 9/6.9, 9/6.9 TILT: 0 LENGTH: 216mm (8.5)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) 180 30 copolar Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 1.5:1 72 70 0 16 20 8 <-141 50 806-896 9/6.9 Dual linear slanted 50 1.5:1 56 60 0 28 15 4 800/1900 1850-1990 9/6.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight kg (lbs) Operating Temperature Radome Material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RAL 7035, Light grey 2 x N Female Bottom 216x216x73.7 (8.5x8.5x2.9) 0.73 (1.6)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
544
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Tilt 0 0 0
545
POWERWAVE
7336.10
POLARIZATION: V-Pol FREQUENCY (MHz): 800-2500 HORIZONTAL BEAM WIDTH (): 60/90 GAIN (dBi dBd): 6/3.9, 9/6.9 TILT: 0 LENGTH: 0.210m (8)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) 180 30 copolar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 16 15 <-150 50 <1.9:1 95 85 <1.5:1 85 80 0 12 17 806-896 6.5/4.4 870-960 6.5/4.4 Vertical 50 <1.9:1 65 40 <1.8:1 60 40 800-2500 1700-1900 9.5/7.4 1900-2500 10/7.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight kg (lbs) Operating Temperature Radome Material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) ASA White 240x280x45 (9x11x2) 1.2 (2.6) 1 x N Female 30cm Pigtail cable 210 x 180 x 42 (8x7x2) 1.0 (2.2)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
546
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
7336.00
POLARIZATION: V-Pol FREQUENCY (MHz): 800-2500 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 3/0.9 TILT: 0 LENGTH: 0.185m ( 7)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Beam width: Ceiling Mounted () Beam width: Wall Mounted () IM3, 2xTx&43dBm (dBc) Power handling, average total (W) 1.5:1 360 70 1.5:1 360 70 <-150 50 806-896 3/0.9 870-960 3/0.9 Vertical 50 1.5:1 360 70 1.5:1 360 70 800-2500 1700-1900 3/0.9 1900-2500 3/0.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight kg (lbs) Operating Temperature Radome Material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) ABS White 210x200x115 (8x8x5) 0.36 (0.8) 1 x N Female Back 185 x65 (7 x 2.5) 0.2 (0.44)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
547
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
P360-3-VCHW2-0
POLARIZATION: V-Pol FREQUENCY (MHz): 824-2700 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi dBd): 3/0.9 TILT: 0 LENGTH: 0.165m (6.5)
ELECTRICAL SPECIFICATIONS* Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization Nominal Impedance () VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) 180 30 copolar IM3, 2xTx&43dBm (dBc) Power handling, average total (W) n.a. n.a. <-140 50 <1.5:1 360 60 <1.5:1 360 58 0 n.a. n.a. 824-896 3/0.9 870-960 3/0.9 Vertical 50 <1.5:1 360 55 <1.5:1 360 50 824-2700 1700-2170 3/0.9 2300-2700 3/0.9
MECHANICAL SPECIFICATIONS* Connector Connector position Dimensions, HxWxD, mm(ft) Mounting Weight kg (lbs) Operating Temperature Radome Material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) 1N-Female With Cable Rg141 of 300mm length Bottom 95x165 Integrated Ceiling mount 0.35 (1) -40C to +60C ABS White 180x180x150 0.8 (1.8)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
548
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Power wave
Powerwaves Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduce investment and operational costs for network operators when building new or upgrading existing networks. Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably. All Clean Site antennas support remote electrical tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost-effective way.
POWERWAVE
The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of tower space. High-volume production in several countries ensures rapid delivery. Our products provide design and installation flexibility that meet a variety of needs, such as enabling co-siting of networks and systems and dealing with space and zoning issues limiting the appearance and location of new installations. Single System The baseline for the Clean Site single system is our single band broadband antenna portfolio with cross polar diversity for either low band or high band. Our low band antenna covers the full frequency range from 806-960 MHz while the high band antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band antenna with a remote electrical tilt (RET) Unit or a high band antenna with a tower mounted amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the combination, your customized Clean Site single system is contained in one single housing enclosure. Dual System The Clean Site dual solution's basic configuration stems from the Powerwave dual band low band/high band antennas. Combine the dual band antenna with remote electrical tilt (RET) units, tower mounted amplifiers (TMA) and diplex filters to suit your network requirements. As with all Clean Site units, all of the necessary components are contained in one discrete enclosure. Triple System The Powerwave Clean Site triple solution is the most advanced antenna system within the Clean Site program. The Clean Site triple solution is based on the high performance triple band antenna platform and is the superior solution for co-siting. An old installed passive antenna can be replaced by a Clean Site triple system with remote electrical tilt (RET) Control and two dual TMAs and two triplexers without changing the visual impact. IntelliMast As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the full broad band antenna range, is the mounting solution to use when more than one sector is covered from a single location. If a crane free installation is required, the super light weight Intellimast-PL is the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers maximum sector coverage with minimum visual impact.
550
Mounting Solutions
Power wave
All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.
551
Mounting Solutions
POWERWAVE
Mounting Solutions
Heavy Duty Tilt Bracket Part Numbers 7256.00 Tilt Bracket Part Numbers 7456.00A Triple Mount Bracket Part Numbers 7454.00A Flush Wall/Pole Hose Clamp Part Numbers 7455.00 Large Pole Mounting Adapter Part Numbers 7458.00A Page 557 Page 556 Page 555 Page 554 Page 553
552
POWERWAVE
Mounting Solutions
7256.00
CROSS REFERENCE TABLE Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series 747x.xx, 747x.xxA, 547x.xx, 746x.0ST.xxxx.xx 748x.xx, 748x.xxA, 548x.xx 776x.xx, 776x.xxA, 576x.xx, 876x.0ST.xxxx.xx, 8722.0ST.xxxx.xx, P65-18-XXW2-x, P90-17-XXW2-x 775x.xx, 775x.xxA, 5475x.xx, 875x.0ST.xxxx.xx, P65-18-XHW2-xx 777x.xx 778x.xx, 778x.xxA, 578x.xx, 878x.0ST.xxxx.xx, P65-1x-XDHW2-N(D1) 7804.00, 7824.00, 7834.00, 7838.00 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx 7218.1x 7227.1x 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x 547x.xx, 548x.xx, 576x.xx, 575x.xx, 578x.xx, 5722.xx Part Number
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 5.5 kg/ 12.1 lbs Galvanized steel Call for info 5.9 kg/ 13 lbs See diagram 25.4-114.3 mm (1-4.5) NA Triple Mount Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt
553
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Mounting Solutions
7456.00A
CROSS REFERENCE TABLE Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series NA NA NA NA NA NA 770x.xx(A), 7720.xx(A), 7721x.xx(A), 7735.xx(A), 7740.xx(A), 8720.0ST.xxxx.xx, 8721.0ST.xxxx.xx P65-18-XW2-x, P90-17-XW2-x, P65-18-CH-N, P65-21-XH-0 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x 570x.xx, 5720.xx, 5721.xx 5735.xx, 5740.xx Part Number
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 3.6 kg/7.9 lbs Galvanized steel, stainless screws & nuts Call for info 4.0 kg/ 8.8 lbs See diagram 25-115 mm NA Big Pole Clamp, 7458.00A/ Flush wall, pole clamp 7455.00 and Triple Mount Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt
554
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Mounting Solutions
7454.00A
The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket permits independent mechanical and electrical tilting of each sector, offering unparalleled versat CROSS REFERENCE TABLE Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series 747x.xx 748x.xx 776x.xx 775x.x0 777x.x0 778x.x0 7804.00, 7824.00, 7834.00, 7838.00 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx 7218.1x, 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7227.1x, 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x, 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x 747x.xx, 748x.xx, 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0, 776x.xx, 775x.x0, 777x.x0, 778x.x0 Part Number
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 6.8 kg/15 lbs Steel Call for info Call for info See diagram, Only antennas <1.5 m/ 5 feet 75-114 mm Call for info Can be used with antenna tilt brackets 7456.00A and 7256.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: NA Sinus Vibration: NA Salt Mist: NA
D031-08417 Rev. A Updated: Apr 5 2010 11:58AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
555
POWERWAVE
Mounting Solutions
7455.00
Powerwave hose clamp is to be used with Powerwave antennas shorter than 1.5 meter/5 feet. Only one kit per antenna. CROSS REFERENCE TABLE Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series NA NA NA NA NA NA NA NA 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x 570x.xx, 572x.xx, 735.x0A, 5740.x0A, 5745.x0A Part Number
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 0.4 kg/ 0.9 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 0.4 kg/ 0.9 lbs NA 40-100 mm/ 1.57-3.9 NA To be used with antenna tilt brackets 7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt
556
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Mounting Solutions
7458.00A
ANTENNA LENGTH: <1.5 meter/ 5 feet WEIGHT: 9.5 kg/ 20.9 lbs
Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna. CROSS REFERENCE TABLE Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series NA NA NA NA NA NA NA NA 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x NA Part Number
MECHANICAL DRAWINGS
MECHANICAL SPECIFICATIONS Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 9.5 kg/ 20.9 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 10 kg/22 lbs NA Max 215/ mm 78.5 NA To be used with antenna tilt brackets 7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt
557
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Antenna FAQ
POWERWAVE
Antenna FAQ
Q: A:
Are your indoor antennas broadband (7336.00, 7336.10)? Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few. Why do you specify different gain for the same antenna in your data sheet? The gain is dependent on the frequency used. The stacking distance of the elements is changed relative to the frequency. This means that the gain will increase with a higher frequency. Powerwave always tries to give you the best information possible, and therefore we specify the gain at common used frequency to help you implement the antennas easily in your network. Why do you use different materials in your radomes? Mechanical structure of antennas are designed in different ways. Powerwave uses either the reflector as the structure, or the radome in a combination with the reflector. When using the reflector as the base for the mechanical structure, the radome is only used for weather protection, and therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there is no benefit to use the reflector as the mechanical structure as it would increase the overall weight of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to minimize product weight while maintaining a robust and reliable solution. Why do you have different gain on your triple band antennas? Powerwave designs triple band antennas by using one low band antenna throughout the whole length, while you have the two upper band antennas on top of each other. This means that the high band antenna at the upper part of the antenna needs more internal cabling compared to the high band antenna at the lower part. This extra internal cabling introduces some more losses, and the result is that the gain of the upper high band antenna is slightly lower. How do I get antenna patterns? The antenna patterns are available at our webpage, please visit: www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna patterns for many different planning tools. Please contact us if you need assistance. You are mentioning broadband antennas - how do you define that? When Powerwave is stating broadband antennas, we are indicating that these can be used for more than one system. We usually state low broadband, meaning that the antennas can be used for systems operating from 806 to 960 MHz. High band usually means that the antennas can be used for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design and produce broadband antennas is to achieve logistical benefits for our global customer base, allowing for deployments in all markets worldwide.
Q: A:
Q: A:
Q: A:
Q: A:
Q: A:
558
Network Management
Power wave
Powerwaves NetWay Solution Suite maximizes return on investment of wireless infrastructure by enabling network discovery, diagnosis and resolution from a centralized software interface in combination with networkaware hardware. NetWay gives you all the tools for fault, configuration, performance and security management. Centrally monitor and manage critical network resources, and adjust cell coverage during peak and off-peak hours, saving time, money and reducing the carbon footprint through fewer truck rolls.
POWERWAVE
NWV-001
The NetWay Vision software product is an Element Management System (EMS), developed and supported by Powerwave Technologies. The NetWay Vision product provides service providers with centralized monitoring and management capabilities for advanced wireless systems, supplied by Powerwave Technologies. GENERAL SPECIFICATIONS NetWay Vision Licensing Software license based on number of managed network elements and number of con-current PC client users Rack mounted or standalone Intel Based Server equipped with, Ethernet 100/1000 Base-T Network Interface, Windows Server OS 2003/2008 Intel Based PC equipped with Color Monitor, Ethernet 10/100/1000 Base-T Network Interface, Windows XP, Internet Explorer 6/7 Updates and fixes for one full year, after installation of NetWay Vision is completed Yearly Software Upgrades and Yearly Updates are available and can be separately purchased User Guide: D044-05258, Administrator Guide: D044-05313 Current Release NetWay Vision
560
Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
POWERWAVE
Part Number 010-11177-0214 010-11182-02nn 010-11183-02nn 010-11198-0002 010-50025-0232 24501, 24511 25001, 25011 25002, 25012 25014, 25016 25101, 25111 25102, 25112 25103, 25113 4168.11.33.00 4168.11.33.02 4168.11.33.03 4168.11.33.06 4168.11.33.52 4168.21.33.00 4168.21.33.03 5472.00 5473.00 5477.00 5478.00 5478.06 5483.00 5488.00 5701.00 5701.02 5701.06 5721.00 5721.02 5722.00 5740.00 5760.00 5760.02 7070.10 (AC) 7070.30 (24 V) 7070.50 (-48V) 7072.10 (AC) 7072.30 (24 V) 7072.50 (-48V) 7085.XX 7095.XX 7216.03 7217.03 7217.04 7217.11 7218.03 7218.04 7218.05 7218.09 7218.13 7218.14
Page 40 41 42 85 43 39 44 45 46 47 48 49 409 410 411 412 413 407 408 308 309 310 311 312 338 339 276 277 278 279 280 281 300 303 304 527 528 529 530 531 532 539 540 387 391 390 389 397 398 402 403 399 400
Part Number 7218.15 7218.19 7225.04 7226.03 7226.04 7227.04 7227.14 7228.03 7228.04 7228.06 7228.08 7230.04 7231.04 7231.06 7232.04 7232.07 7233.04 7233.06 7233.08 7255.03 7255.04 7256.00 7263.01 7263.04 7270.02 7271.02 7271.03 7272.02 7273.02 7273.03 7281.02 7281.04 7282.03 7332.00B 7332.02B 7332.06B 7333.00B 7333.02B 7333.06B 7334.00B 7334.02B 7334.06B 7336.00 7336.10 7390.00B 7454.00A 7455.00 7456.00A 7458.00A 7472.00 7472.00A 7473.00 7473.00A
Page 404 405 416 417 418 423 422 425 426 427 428 430 431 432 433 434 435 436 437 394 401 553 392 393 415 419 420 424 429 421 395 396 388 446 443 444 441 440 442 447 445 448 547 546 385 555 556 554 557 319 320 325 326
Part Number 7476.00 7476.02 7476.06 7477.00 7477.02 7477.06 7478.00 7478.00A 7478.02 7478.06 7481.00 7482.00 7483.00 7483.00A 7486.00 7486.02 7486.06 7487.00 7487.02 7487.06 7488.00 7488.00A 7488.02 7488.06 7700.00 7700.06 7701.00 7701.00A 7701.02 7701.02A 7701.06 7720.00 7721.00 7721.00A 7721.02 7721.02A 7721.06 7721.10 7721.40 7722.00 7722.00A 7735.00A 7740.00A 7745.00A 7750.00 7750.00A 7750.OST.0002.00 7752.00 7752.00A 7752.OST.0002.00 7755.00 7755.00A 7755.OST.0002.00
Page 313 314 315 316 317 321 318 324 322 323 340 329 333 334 341 342 327 328 336 337 330 332 331 335 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 301 302 362 363 505 364 365 504 366 367 503
561
POWERWAVE
Part Number 7760.00 7760.00A 7760.02 7760.03 7760.06 7760.40 7762.00 7765.00 7766.00 7780.00 7780.00A 7782.00 7782.00A 7785.00 7785.00A 7840.00 7850.00B 7999.00 8110.10 8110.40 8210.10 8210.40 8211.10 8211.40 8212.10 8212.40 8220.10 8220.40 8230.10 8230.40 8510.10 8510.40 8720.0ST.B400.00 8721.0ST.0000.00 8721.0ST.B400.00 8722.0ST.0000.00 8722.0ST.B400.00 8760.0ST.0000.00 8760.0ST.B100.00 8760.0ST.B400.00 8780.0ST.0000.00 8780.0ST.B100.00 8780.0ST.B100.04 8780.0ST.B400.00 8780.0ST.B400.02 8780.0ST.B400.04 8782.0ST.0000.00 8782.0ST.B100.00 8782.0ST.B100.02 8782.0ST.B100.04 8782.0ST.B400.00 8782.0ST.B400.02 8782.0ST.B400.04
Page 353 354 352 355 356 357 359 358 360 369 370 371 372 373 374 439 449 544 512 509 510 511 515 516 513 514 519 518 522 521 524 525 484 487 485 488 486 492 490 491 464 465 466 467 468 469 470 471 472 473 474 475 476
Part Number 8785.0ST.0000.00 8785.0ST.B100.00 8785.0ST.B100.04 8785.0ST.B400.00 8785.0ST.B400.02 8785.0ST.B400.04 ALR0062/00109 ALR1200/00209 ALR1200/90209 ALR1212/00209 ALR2200/00209 ALR2200/90209 ALR2212/00119 ALR2212/00129 ALR2212/92202 ALR2222/00109 ALR3200/00109 ALR3200/01109 ALR3200/90109 ALR3200/91109 ALR3232/51109 ALR3242/03039 ALR3246/00309 ALR3246/010 ALR4200/00209 ALR4200/01109 ALR4200/01209 ALR4600/00109 ALR4600/00119 ALR4600/00209 ALR6200/00109 ALR6212/00102 ALR6212/90129 ALR6212/90139 ALT1200/00209 AM1200/05309 AR0027/50409 AR0065/00109 AR1200/05309 AR1200/95209 AR1700/80208 AR1700/80209 AR1700/80218 AR1700/80219 AR1700/80229 AR1700/80408 AR1700/80409 AR1700/80418 AR1700/80419 AR1700/80429 AR1700/90209 AR1700/90409 AR1700/90419
Page 477 478 479 480 481 482 141 143 142 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 171 110 111 172 173 112 113 114 115 116 117 118 119 120 121 122 123 124
Part Number AR1717/90609 AR200/00 AR200/90109 AR2200/00109 AR2212/052 AR2212/05209 AR2700/50209 AR2700/50409 AR2727/50609 AR3400/01109 AR3400/91109 AR3434/51109 AR3700/50409 AR4200/01209 AR4600/05309 AR4640/05309 AR6500/00109 AR6512/00229 AR6512/00239 AR6517/01429 AR6517/01439 AR6517/01459 AR6522/01109 AR6560/00209 ATR1200/001xy (GSM 900) ATR1200/002xy (GSM 900) ATR1200/901xy (EGSM 900) ATR1200/902xy (EGSM 900) CEV-000-000-001 CM1000-AMPS-xxx CM1001-EGSM-xxx CM1002-DPBXBC CM1007-DBPXBC-xxx CM1015-DPBXBC-xxx CW0-000-000-003 G3L-1829-120 G3L-1929-160 G3L-2129-140 G3L-850-160 G3l-850-180 G3L-929-135 LGP12101 LGP121nn LGP138nn LGP141nn LGP145nn LGP146nn LGP174nn LGP175nn LGP18104 LGP18510, LGP18520 LGP18520, LGP18521 LGP185nn
Page 125 174 176 175 177 178 126 127 128 179 180 181 129 182 183 184 130 131 132 133 134 135 136 137 186 187 188 189 101 86 87 79 81 83 99 11 12 13 9 7 10 71 69 75 90 88 89 51 52 70 53 54 55
562
POWERWAVE
Part Number LGP18611 LGP186nn LGP192nn LGP195nn LGP213nn LGP215nn LGP219nn LGP23302 LGP233nn LNKA800 LNKA900 LNKC1800 LNKC1900 LNKF100 LNKF400 LNKF800 MF0-004-000-002 MF0-048-000-001 NP50B0-22111 NP5O-11111 NPBO-11111 NPBO-11311 OS-0851-P0-XXX OS-0921-V0-XXX OS-0933-E0-XXX OS-0951-P0-XXX OS-1821-H0-XXX OS-1833-E0-XXX OS-1851-H0-XXX OS-1921-H0-XXX OS-1933-E0-XXX OS-1951-E0-XXX OS-1991-H0-XXX OS-2133-E0-XXX OS-2151-E0-XXX P360-3-VCHW2-0 P65-15-XD-N P65-15-XDHW2-N P65-15-XL-2 P65-15-XL-4 P65-15-XL-R P65-15-XLH-RR P65-16-XL-2 P65-16-XL-4 P65-16-XL-6 P65-16-XL-R P65-16-XLH-RR P65-17-XDHW2-N P65-17-XL-2 P65-17-XL-4 P65-17-XL-R P65-17-XLH-RR P65-18-XDHW2-N
Page 57 56 50 91 73 33 92 76 74 209 212 213 211 214 210 215 96 97 191 192 193 194 15 21 25 16 22 26 17 23 27 18 28 29 19 548 307 380 344 345 453 457 346 347 348 454 458 378 349 350 455 459 376
Part Number P65-18-XHW2-MM P65-18-XHW2-RR P65-18-XXW2-M P65-18-XXW2-R P90-14-XLH-RR P90-15-XLH-RR P90-16-XLH-RR P90-17-XXW2-M P90-17-XXW2-R RH004000/003 RH004002/001 RH100020/101 RH100020/211 RH200020/101 RH200020/211 RH201022/101 RH201022/211 RH300020/101 RH300020/211 RH304022/03A RH304022/101 RH304022/211 RH305022/03A RH308022/03A RH309022/101 RH309022/211 RH330020/101 RH334022/101 RH400020/101 RH400020/211 RH500020/101 RH500020/211 RH600020/101 RH600020/211 RH601022/101 RH601022/211 RH602022/101 RH621010 RH700030/101 RH700030/101 RH705032/101 RH770020/101 RH777722/251 RH805022/101 RH805022/211 RH900020/101 RH900020/211 RH909022/251 RTM1GU-A2A1 RTM1GU-A2A1.J2J1 RTM1GU-A2A1.J2J1.L2L1 RTM1GU-A2A1.L2L1 RTM1GU-J2J1
Page 495 494 498 497 460 461 462 500 499 221 226 227 228 229 230 231 232 233 234 260 235 236 261 262 237 238 239 240 241 242 243 244 245 246 247 248 249 222 219 250 251 252 253 254 255 256 257 258 196 197 195 198 199
Part Number RTM1GU-J2J1.L2L1 RTM1GU-L2L1 SB400-A SB400-B Tap-In TS07-AWDB111-001 TS07-AWDB112-001 TSAW-07BP111-001 TT08-19DB111-001 TT19-08BP111-001 TT26-0000112-0n1 TT8D-0000112-0n1 TTAW-0000112-001 TTAW-07BP111-001 TTAW-60BW111-001 TU09-000001n-001 TU9E-28BW01n-00n UA107 62/1 UA107 62/2 UA107 62/3 UA107 62/4 UA115 04 UA115 04/84, UA115 04/85 VersaFlex 7.0 VersaFlex 9.0
Page 200 201 204 205 217 62 63 58 64 65 35 37 60 59 61 66 67 267 268 269 270 207 265 103 104
563
Contact Us
Quality and Environmental Management System Certifications ISO 9001 TL 9000 TickIT ISO 14001
Sales by Region
U.S. & Canada USSales@pwav.com Latin America SouthAmericaSales@pwav.com Europe EuropeSales@pwav.com Middle East & Africa MEASales@pwav.com Asia-Pacific APACSales@pwav.com
Support by Region
Customer service offered 24 hours a day
Customer Service +1 888 PWR WAVE (+1 888 797 9283) Technical Support Americas Support@pwav.com +1 888 PWR WAVE ext. 3 (+1 888 797 9283) Technical Support Asia-Pacific TechSupportHK@pwav.com Technical Support Europe TechSupport@pwav.com +46 8 540 822 00
www.powerwave.com
Copyright 2012, Powerwave Technologies, Inc. All rights reserved. Powerwave, Powerwave Technologies, and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc. Clean Site, Connecting the Wireless World, Inside Out Solutions, Intellimast, InView Management System, LinkNet, MicroFlex, NetOne, NetWay, NetworkOne, Nexus, Performance Boost, PowerBoost, RapidFlex, SubTerra, Tap-In and VersaFlex are trademarks of Powerwave Technologies, Inc. LTE is a registered trademark of European Telecommunications Standards Institute. Other trademarks referenced are the property of their respective owners. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data. D031-08643 Rev. E 01/12