Escolar Documentos
Profissional Documentos
Cultura Documentos
D Single-Supply Operation
Input Voltage Range Extends to Ground Output Swings to Ground While Sinking Current Input Offset Voltage 150 V Max at 25C for LT1013A Offset-Voltage Temperature Coefficient 2.5 V/C Max for LT1013A Input Offset Current 0.8 nA Max at 25C for LT1013A High Gain . . . 1.5 V/V Min (RL = 2 k), 0.8 V/V Min (RL = 600 k) for LT1013A Low Supply Current . . . 0.5 mA Max at TA = 25C for LT1013A Low Peak-to-Peak Noise Voltage . . . 0.55 V Typ Low Current Noise . . . 0.07 pA/Hz Typ
D D D D D D D
1 2 3 4
8 7 6 5
NC 1IN NC 1IN+ NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
description/ordering information
The LT1013 devices are dual precision operational amplifiers, featuring high gain, low supply current, low noise, and low-offset-voltage temperature coefficient. The LT1013 devices can be operated from a single 5-V power supply; the common-mode input voltage range includes ground, and the output can also swing to within a few millivolts of ground. Crossover distortion is eliminated. The LT1013 can be operated with both dual 15-V and single 5-V supplies.
NC VCC NC 2IN+ NC
1 2 3 4 8 7 6 5
The LT1013C, LT1013AC, and LT1013D are characterized for operation from 0C to 70C. The LT1013I, LT1013AI, and LT1013DI are characterized for operation from 40C to 105C. The LT1013M, LT1013AM, and LT1013DM are characterized for operation over the full military temperature range of 55C to 125C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL PRF 38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
ORDERING INFORMATION
TA VIOmax AT 25C (V) PDIP (P) 300 0C to 70C 800 SOIC (D) PDIP (P) SOIC (D) PDIP (P) 40 C 105 C 40C to 105C 800 SOIC (D) CDIP (JG) CDIP (JGB) 150 55C to 125C 300 LCCC (FK) LCCC (FKB) CDIP (JG) CDIP (JGB) LCCC (FKB) PACKAGE Tube of 50 Tube of 75 Reel of 2500 Tube of 50 Tube of 75 Reel of 2500 Tube of 50 Tube of 75 Reel of 2500 Tube of 50 Tube of 50 Tube of 55 Tube of 55 Tube of 50 Tube of 50 Tube of 55 ORDERABLE PART NUMBER LT1013CP LT1013CD LT1013CDR LT1013DP LT1013DD LT1013DDR LT1013DIP LT1013DID LT1013DIDR LT1013AMJG LT1013AMJGB LT1013AMFK LT1013AMFKB LT1013MJG LT1013MJGB LT1013MFKB 1013DI LT1013AMJG LT1013AMJGB LT1013AMFK LT1013AMFKB LT1013MJG LT1013MJGB LT1013MFKB 1013D LT1013DIP 1013C LT1013DP TOP-SIDE MARKING LT1013P
800 SOIC (D) Tube of 75 LT1013DMD 1013DM Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
9 k
Q36
J1
Q41
Q1
400 Q2 Q28
Q38 OUT
IN
Q21
400 Q12 Q18 Q29 Q10 Q11 Q8 Q9 Q7 10 pF Q17 Q20 75 pF 5 k 5 k 2 k 1.3 k 2 k Q19 2 k 10 pF Q23 Q24 42 k 30 Q34 4 pF Q31 Q40
Q39
IN+
Q22
600
VCC
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Input voltage range, VI (any input, see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC 5 V to VCC+ Differential input voltage (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC. 2. Differential voltages are at IN+ with respect to IN. 3. The output may be shorted to either supply. 4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. Due to variation in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation. 5. The package thermal impedance is calculated in accordance with JESD 51-7.
electrical characteristics at specified free-air temperature, VCC = 15 V, VIC = 0 (unless otherwise noted)
TEST CONDITIONS 25C 60 400 0.4 0.5 0.2 2.8 15 38 15 to 13.5 15 to 13 12.5 12 0.5 1.2 0.7 97 94 100 97 25C 25C 25C 25C Full range 120 70 137 300 4 0.35 0.55 0.7 117 114 0.2 7 14 13 12.5 0.8 1.5 1 100 98 103 101 123 100 140 400 5 0.35 0.5 0.55 120 117 2.5 8 15 to 13 14 15.3 to 13.8 15 to 13.5 15.3 to 13.8 25 15 to 13.5 15 to 13 12.5 12 0.5 1.2 0.7 97 94 100 97 120 70 137 300 4 0.35 0.55 0.6 117 dB dB M G mA 114 dB 2 7 V/V 14 15.3 to 13.8 V 30 12 20 1.5 15 1.5 0.15 0.8 0.4 0.5 0.2 1.5 2.8 30 38 nA nA 2.5 0.3 2 0.7 240 1000 5 40 200 Full range Full range 25C 25C Full range 25C Full range 25 C 25C 300 150 800 RS = 50 TA LT1013C MAX MIN TYP UNIT V V V/C V/C V/mo LT1013AC MAX MIN TYP LT1013DC MAX MIN TYP
PARAMETER
VIO
aV
IO
IIO
IIB
VICR Full range 25C RL = 2 k Full range RL = 600 25C 25C RL = 2 k Full range 25C Full range 25C Full range VO = 10 V, VO = 10 V, VIC = 15 V to 13.5 V VIC = 14.9 V to 13 V VCC+ = 2 V to 18 V VO = 10 V, RL = 2 k
VOM
AVD
CMRR
kSVR
Channel separation
rid
ric
ICC
6 TEST CONDITIONS MIN 90 570 0.3 6 18 90 0 to 3.5 0 to 3 15 5 13 220 4 3.4 3.2 1 0.32 0.5 0.55 4 4.4 350 4 3.4 3.3 1 0.31 0.45 0.5 220 4.4 4 10 25 15 5 0 to 3 25 10 13 350 4 3.4 3.2 1 0.32 0.5 0.55 V/V V/ V mA 220 4.4 4 V 0 to 3 15 5 25 10 13 350 mV 0.3 to 3.8 0 to 3.5 0.3 to 3.8 0 to 3.5 55 0.3 to 3.8 V 50 15 35 18 3.5 2 0.2 1.3 0.3 2 6 50 90 nA nA 350 1200 450 60 250 250 950 V V MIN MIN 25C Full range 25C Full range 25C Full range 25C 25 C RS = 50 TA UNIT LT1013C TYP MAX LT1013AC TYP MAX LT1013DC TYP MAX
SLOS018H MAY 1988 REVISED NOVEMBER 2004
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted)
PARAMETER
VIO
IIO
IIB
VICR Full range Output low, 25C Full range 25C 25C 25C Full range RL = 500 25C 25C Full range Isink = 1 mA No load Output low, RL = 600 to GND Output low, Output high, Output high, RL = 600 to GND VO = 5 mV to 4 V, No load 25C
VOM
AVD
ICC
SR
Slew rate
Vn
VN(PP) In
electrical characteristics at specified free-air temperature, VCC = 15 V, VIC = 0 (unless otherwise noted)
TEST CONDITIONS MAX 300 40 300 0.3 0.4 1.5 0.15 1.5 12 20 25 15 to 13.5 15 to 13 14 0.2 7 114 94 100 97 25C 25C 25C 25C Full range 120 70 137 300 4 0.35 0.55 0.7 117 13 12.5 0.8 1.5 1 97 100 97 103 101 123 100 140 400 5 0.35 0.5 0.55 120 117 2.5 8 14 15.3 to 13.8 15 to 13.5 15 to 13 12.5 12 0.5 1.2 0.7 97 94 100 97 120 70 137 300 4 0.35 0.55 0.6 117 dB dB M G mA 114 dB 2 7 V/V 14 15.3 to 13.8 V 15 2.8 15 38 15 to 13.5 15 to 13 12.5 12 0.5 1.2 0.7 15.3 to 13.8 30 0.8 0.5 0.2 1.5 2.8 30 38 nA nA 2 0.7 1000 5 200 550 0.4 0.5 0.2 2.5 150 800 25C 60 Full range Full range 25C 25C Full range 25C Full range 25C 25 C RS = 50 TA LT1013I MIN TYP UNIT V V V/C V/C V/mo V/mo LT1013AI MAX MIN TYP LT1013DI MAX MIN TYP
PARAMETER
VIO
aV
IO
IIO
IIB
VICR Full range 25C RL = 2 k Full range RL = 600 25C 25C RL = 2 k Full range 25C Full range 25C Full range VO = 10 V, VO = 10 V, VIC = 15 V to 13.5 V VIC = 14.9 V to 13 V VCC = 2 V to 18 V CC VO = 10 V, RL = 2 k
VOM
AVD
CMRR
kSVR
Channel separation
rid
ric
ICC
8 TEST CONDITIONS MIN 90 570 0.3 6 18 90 0 to 3.5 0 to 3 15 5 13 220 4 3.4 3.2 1 0.32 0.5 0.55 4 4.4 350 4 3.4 3.3 1 0.31 0.45 0.5 220 4.4 4 10 25 15 5 0 to 3 25 10 13 350 4 3.4 3.2 1 0.32 0.5 0.55 V/V V/ V mA 220 4.4 4 V 0 to 3 15 5 25 10 13 350 mV 0.3 to 3.8 0 to 3.5 0.3 to 3.8 0 to 3.5 55 0.3 to 3.8 V 50 15 35 18 3.5 2 0.2 1.3 0.3 2 6 50 90 nA nA 350 1200 450 60 250 250 950 V V MAX MIN MIN 25C Full range 25C Full range 25C Full range 25C 25 C RS = 50 TA UNIT LT1013I TYP LT1013AI TYP MAX LT1013DI TYP MAX
SLOS018H MAY 1988 REVISED NOVEMBER 2004
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted)
PARAMETER
VIO
IIO
IIB
VICR Full range Output low, 25C Full range 25C 25C 25C Full range RL = 500 25C 25C Full range Isink = 1 mA No load Output low, RL = 600 to GND Output low, Output high, Output high, RL = 600 to GND VO = 5 mV to 4 V, No load 25C
VOM
AVD
ICC
SR
Slew rate
Vn
VN(PP) In
electrical characteristics at specified free-air temperature, VCC = 15 V, VIC = 0 (unless otherwise noted)
TEST CONDITIONS 25C Full range Full range 25C 25C Full range 25C Full range 25 C 25C 15 to 13.5 14.9 to 13 12.5 11.5 0.5 1.2 0.25 97 94 100 97 25C 25C 25C 25C Full range 120 70 137 300 4 0.35 0.55 0.7 117 117 2 7 14 13 12 0.8 1.5 0.5 100 97 103 100 123 100 140 400 5 0.35 0.5 0.6 120 117 2.5 8 14.9 to 13 14 15.3 to 13.8 15 to 13.5 15.3 to 13.8 45 30 15 to 13.5 14.9 to 13 12.5 11.5 0.5 1.2 0.25 97 94 100 97 120 70 137 300 4 0.35 0.55 0.7 117 dB dB M G mA 114 dB 2 7 V/V 14 15.3 to 13.8 V 15 30 12 20 5 2.5 15 0.2 1.5 0.15 0.8 0.5 0.4 0.5 0.2 1.5 5 30 45 nA nA 0.5 2.5 0.4 0.5 2 550 300 1000 2.5 60 300 40 150 200 800 RS = 50 TA LT1013M MIN TYP MAX UNIT V V V/C V/C V/mo LT1013AM MIN TYP MAX LT1013DM MIN TYP MAX
PARAMETER
VIO
aV
IO
IIO
IIB
VICR Full range 25C RL = 2 k Full range RL = 600 25C 25C VO = +10 V, Full range 25C Full range 25C Full range VIC = 15 V to 13.5 V VIC = 14.9 V to 13 V VCC = 2 V to 18 V CC VO = 10 V, RL = 2 k RL = 2 k VO = 10 V,
VOM
AVD
CMRR
kSVR
Channel separation
rid
ric
ICC
On products compliant to MIL-PRF-38535, Class B, this parameter is not production tested. Full range is 55C to 125C. All typical values are at TA = 25C.
10 TEST CONDITIONS MIN 90 400 200 0.3 10 18 120 0 to 3.5 0 to 3 15 5 18 220 4 3.4 3.1 1 0.32 0.5 0.65 4 4.4 350 4 3.4 3.2 1 0.31 0.45 0.55 220 4.4 4 10 25 15 5 0 to 3 25 10 15 350 4 3.4 3.1 1 0.32 0.5 0.65 V/ V V/V mA 220 4.4 4 V 0.3 to 3.8 0 to 3.5 0.3 to 3.8 0 to 3.5 0 to 3 15 5 25 10 18 350 mV 80 0.3 to 3.8 V 50 15 35 18 6 2 0.2 1.3 0.3 750 120 450 560 1200 2 10 50 120 nA nA 1500 250 900 800 2000 450 60 250 250 950 V MIN MIN RS = 50 Full range VIC = 0.1 V 25C Full range 25C Full range 25C 25 C 125C RS = 50 , 25C TA UNIT LT1013M TYP MAX LT1013AM TYP MAX LT1013DM TYP MAX
SLOS018H MAY 1988 REVISED NOVEMBER 2004
electrical characteristics at specified free-air temperature, VCC+ = 5 V, VCC = 0, VO = 1.4 V, VIC = 0 (unless otherwise noted)
PARAMETER
VIO
IIO
IIB
VICR Full range Output low, 25C Full range 25C 25C 25C Full range RL = 500 25C 25C Full range Isink = 1 mA No load Output low, RL = 600 to GND Output low, Output high, Output high, RL = 600 to GND VO = 5 mV to 4 V, No load 25C
VOM
AVD
ICC
SR
Slew rate
Vn
VN(PP) In
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE vs Supply voltage VIO VIO IIO IIB VIC AVD Input offset voltage Change in input offset voltage Input offset current Input bias current Common-mode input voltage Differential voltage amplification Channel separation Output saturation voltage CMRR kSVR ICC IOS Vn In VN(PP) Common-mode rejection ratio Supply-voltage rejection ratio Supply current Short-circuit output current Equivalent input noise voltage Equivalent input noise current Peak-to-peak input noise voltage Pulse response Phase shift vs Temperature vs Time vs Temperature vs Temperature vs Input bias current vs Load resistance vs Frequency vs Frequency vs Temperature vs Frequency vs Frequency vs Temperature vs Time vs Frequency vs Frequency vs Time Small signal Large signal vs Frequency 1 2 3 4 5 6 7, 8 9, 10 11 12 13 14 15 16 17 17 18 19, 21 20, 22, 23 9
11
TYPICAL CHARACTERISTICS
INPUT OFFSET VOLTAGE OF REPRESENTATIVE UNITS vs FREE-AIR TEMPERATURE
250 VCC+ = 5 V, VCC = 0 TA = 55C to 125C VIO V V IO Input Offset Voltage uV VIO Input Offset Voltage mV V IO VCC = 15 V TA = 55C to 125C VCC+ = 5 V VCC = 0 TA = 25C 0.1 RS VCC = 15V TA = 25C 3k 10 k + RS 1M 3M 10 M 200 150 100 50 0 50 100 150 200 250 50 25 0 25 50 75 100 125 VCC = 15 V
0.01 1k
30 k 100 k 300 k
TA Free-Air Temperature C
Figure 1
WARM-UP CHANGE IN INPUT OFFSET VOLTAGE vs TIME AFTER POWER-ON
5 XVIO Change in Input Offset Voltage uV V IO V VCC = 15 V TA = 25C I IO Input Offset Current nA IIO 4 0.8 1 VIC = 0
Figure 2
0.6
2 JG Package 1
0.4
0.2 VCC = 15 V
0 50
25
25
50
75
100
125
TA Free-Air Temperature C
Figure 3
Figure 4
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
12
TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE
30 VIC = 0 VIC Common-Mode Input Voltage V V IC 25 IIB Input Bias Current nA I IB 15 TA = 25C 10 4 VIC Common-Mode Input Voltage V V IC 13
10
0 50
1 30
Figure 5
DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE
A VD Differential Voltage Amplification V/ V AVD VCC = 15 V VO = 10 V TA = 25C A VD Differential Voltage Amplification V/ V AVD 10 10
Figure 6
DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE
VCC = 5 V, VCC = 0 VO = 20 mV to 3.5 V 4
0.4
0.1 100
400
1k
4k
10 k
0.1 100
400
1k
4k
10 k
RL Load Resistance
RL Load Resistance
Figure 7
Figure 8
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS
DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY
25 AVD Differential Voltage Amplification dB AVD 20 15 10 5 0 5 VCC = 15 V 10 15 0.01 220 240 10 VCC+ = 5 V VCC = 0 VCC = 15 V VIC = 0 CL = 100 pF TA = 25C 80 AVD Differential Voltage Amplification dB AVD 100 120 VCC+ = 5 V VCC = 0 140 160 180 200 140 120 100 80 60 40 20 0 20 0.01 0.1 VCC+ = 5 V VCC = 0 VCC = 15 V CL = 100 pF TA = 25C
Phase Shift
AVD
0.3
1 3 f Frequency MHz
Figure 9
CHANNEL SEPARATION vs FREQUENCY
160 VCC = 15 V VI(PP) = 20 V to 5 kHz RL = 2 k TA = 25C Limited by Thermal Interaction 10
Figure 10
OUTPUT SATURATION VOLTAGE vs FREE-AIR TEMPERATURE
VCC+ = 5 V to 30 V VCC = 0 Output Saturation Voltage V
120
100
0.1
80
Isink = 10 A Isink = 0
0.01 50
25
125
Figure 11
Figure 12
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
14
TYPICAL CHARACTERISTICS
COMMON-MODE REJECTION RATIO vs FREQUENCY
120 CMRR Common-Mode Rejection Ratio dB kSVR Supply-Voltage Rejection Ratio dB TA = 25C 100 VCC = 15 V 80 VCC+ = 5 V VCC = 0 140 120 100 Positive Supply 80 60 Negative Supply VCC = 15 V TA = 25C
60
40
40 20
20
0 10
100
1k
10 k
100 k
1M
0 0.1
10
100
1k
10 k
100 k
1M
f Frequency Hz
f Frequency Hz
Figure 13
SUPPLY CURRENT vs FREE-AIR TEMPERATURE
460 I CC Supply Current Per Amplifier A I OS Short-Circuit Output Current mA 40 30 20 10 0 10 20 30 40
Figure 14
SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME
TA = 55C TA = 25C TA = 125C VCC+ = +15 V
420
Figure 15
Figure 16
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
15
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE AND EQUIVALENT INPUT NOISE CURRENT vs FREQUENCY
1000 Vn Vn Equivalent Input Noise Voltage nV/ Hz nV/Hz Vn Vn Equivalent Input Noise Voltage fA/ Hz nV/Hz VN(PP) VN(PP) Noise Voltage nV VCC = 2 V to 18 V TA = 25C 2000
1600
300 I n
1200
100
800
Vn 30 1/f Corner = 2 Hz 10
400
10
100
1k
0 0 2 4 6 8 10 t Time s
f Frequency Hz
Figure 17
VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE
80 60 VO Output Voltage mV VO 40 20 0 20 40 60 80 V) VO Output Voltage V VCC = 15 V AV = 1 TA = 25C 20 15 10 5 0 5 10 15 0 2 4 6 8 10 12 14 20
Figure 18
VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE
VCC = 15 V AV = 1 TA = 25C
50
t Time s
t Time s
Figure 19
Figure 20
16
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE
160 140 120 VO Output Voltage mV VO 100 80 60 40 20 0 20 VCC+ = 5 V, VCC = 0 VI = 0 to 100 mV RL = 600 to GND AV = 1 TA = 25C 6 5 VO Output Voltage mV VO 4 3 2 1 0 1 2 VCC+ = 5 V, VCC = 0 VI = 0 to 4 V RL = 4.7 k to 5 V AV = 1 TA = 25C
20
40
60
80
t Time s
10 20 30 t Time s
40
50
60
70
Figure 21
VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE
6 5 4 3 2 1 0 1 2 0 10 20 30 40 50 60 70 t Time s VCC+ = 5 V, VCC = 0 VI = 0 to 4 V RL = 0 AV = 1 TA = 25C
Figure 22
VO Output Voltage V VO
Figure 23
17
Figure 24. Voltage-Follower Response With Input Exceeding the Negative Common-Mode Input Voltage Range
18
2 mV
100 mV
100 mV
low-supply operation
The minimum supply voltage for proper operation of the LT1013 is 3.4 V (three NiCad batteries). Typical supply current at this voltage is 290 A; therefore, power dissipation is only 1 mW per amplifier.
19
APPLICATION INFORMATION
0.1 F 100 k + 10 LT1013 AVD = 50,000 4.7 F 2 k + LT1001 100 k 110 k 24.3 k 0.1 F NOTE A: All capacitor values are for nonpolarized capacitors only. 2.2 F 4.3 k 22 F Oscilloscope Rin = 1 M
10 k 10 M 100 10 M 10 M 10 M + LT1013 Vn
50 k (see Note A) 15 V + 100 (see Note A) 50 k (see Note A) LT1013 15 V VO = 1000 VIO
[V In + Metal-film resistor
no 40 MW
IO
20
68
+ 10 F
0.002 F 0.33 F Q4 2N2222 5V 2 k 100 pF 1/2 LT1013 + 4 k 10 k 4.3 k 5V LT1004 1.2 V 1 k 4-mA Trim 10 k 10 k 820 100 k
Q2 2N2905
1/2 LT1013 +
Figure 30. 5-V 4-mA to 20-mA Current-Loop Transmitter With 12-Bit Accuracy
21
APPLICATION INFORMATION
T1 + 10 F
0.1 5V 100 k To Inverter Drive + 1/2 LT1013 10 k 4.3 k 5V 4 k 2 k 4-mA Trim IN 0 to 4 V 301 1 k 20-mA Trim + 1/2 LT1013 68 k
1N4002 (4)
4 mA to 20 mA Fully Floating
Figure 31. Fully Floating Modification to 4-mA to 20-mA Current-Loop Transmitter With 8-Bit Accuracy
1/2 LTC1043 IN+ 6 1 F 2 3 IN 18 15 R1 5 5V 5 + 8 1/2 1 F LT1013 6 4 7
OUT A R2
0.01 F
22
APPLICATION INFORMATION
10 200 k 9 5V 3 2 LT1013 + 1 10 k 10 k 1 F IN+ 20 kW 5V 1% film resistor. Match 10-k resistors to within 0.05%. For high source impedances, use 2N2222 diodes. NOTE A: AVD = (400,000/RG) + 1 6 LT1013 5 + 7 10 k 10 k RG (2 k Typ) 13 12 200 k 10 k
20 kW IN
LT1013 + 11
23
18-Feb-2005
PACKAGING INFORMATION
Orderable Device 5962-88760012A 5962-8876001PA 5962-88760022A 5962-8876002PA LT1013ACP LT1013AIP LT1013AMFKB LT1013AMJG LT1013AMJGB LT1013AMP LT1013CD LT1013CDR LT1013CP LT1013DD LT1013DDR LT1013DID LT1013DIDR LT1013DIP LT1013DMD LT1013DP LT1013IP LT1013MFKB LT1013MJG LT1013MJGB LT1013MP LT1013Y
(1)
Status (1) ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE
Package Type LCCC CDIP LCCC CDIP PDIP PDIP LCCC CDIP CDIP PDIP SOIC SOIC PDIP SOIC SOIC SOIC SOIC PDIP SOIC PDIP PDIP LCCC CDIP CDIP PDIP XCEPT
Package Drawing FK JG FK JG P P FK JG JG P D D P D D D D P D P P FK JG JG P Y
Pins Package Eco Plan (2) Qty 20 8 20 8 8 8 20 8 8 8 8 8 8 8 8 8 8 8 8 8 8 20 8 8 8 0 1 1 1 75 2500 50 75 2500 75 2500 50 75 50 1 1 1 1 1 1 1 None None None None None None None None None None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) None None None None None None
Lead/Ball Finish
POST-PLATE Level-NC-NC-NC A42 SNPB A42 SNPB Call TI Call TI A42 SNPB A42 SNPB Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI A42 SNPB A42 SNPB Call TI Call TI Level-NC-NC-NC Level-NC-NC-NC Call TI Call TI Level-NC-NC-NC Level-NC-NC-NC Call TI Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-NC-NC-NC Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-2-250C-1 YEAR Level-NC-NC-NC Level-1-220C-UNLIM Level-NC-NC-NC Call TI Level-NC-NC-NC Level-NC-NC-NC Call TI Call TI POST-PLATE Level-NC-NC-NC
POST-PLATE Level-NC-NC-NC
POST-PLATE Level-NC-NC-NC
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
Addendum-Page 1
18-Feb-2005
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MCER001A JANUARY 1995 REVISED JANUARY 1997
JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5
CERAMIC DUAL-IN-LINE
0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)
015
4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8
MECHANICAL DATA
MLCC006B OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
MECHANICAL DATA
MPDI001A JANUARY 1995 REVISED JUNE 1999
P (R-PDIP-T8)
0.400 (10,60) 0.355 (9,02) 8 5
PLASTIC DUAL-IN-LINE
4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gage Plane
4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.