Escolar Documentos
Profissional Documentos
Cultura Documentos
Christmas Tree
Table of Contents
Introduction…………………………………………..3
Getting Started……….…….………………………..3
Basics of Navigation………………………………...4
2
Introduction
Getting Started
2. When the web page opens click on the blue tab labeled download
located on the upper right side of the page.
3
Basics of Navigation
1. When the mouse is placed on top of a brick in the Brick Palette pop-up
it will give a description of the brick. Ex. BRICK 1x1
2. When a brick is clicked on the mouse will move the brick back and
forth, up and down.
3. To place a brick on the grid board or another brick click the mouse
button one time.
4. If a brick was placed incorrectly you can delete the brick. First click on
the red X on the pop-up screen located on the right side, then move
the mouse to the block to be removed and click on it.
To Construct STUMP
4
To Construct TREE LIGHTS
1. In the brick palette pop-up screen (left side) click once on the top left 2x3
brick Lego piece. Scroll down until the brown 1x2 brick is in the screen,
click on this brick. Scroll brick over using the mouse to the approximate
middle of the grid board. Click once when the block is in the correct
position. This will attach the piece to the board.
2. In the brick palette screen click on another brown 1x2 brick. Scroll the
brick over to the grid board and place the brick directly on top of the 1x2
brown brick that is on the grid board. Click mouse to connect the two
bricks. (Figure 1.1)
Figure 1.1
5
Tree Body Instructions
1. In the brick palette screen scroll down to the green 1x6 brick. Click and
scroll brick over to grid board. Attach brick on the left side peg of the
brown 1x2 brick so that the green piece has 5 pegs sticking off the left
side of the brown piece with the 6th peg being connected to the brown 1x2
brick. When brick is in correct position click once to attach. (Figure 1.2)
Figure 1.2
2. In the brick palette screen click on another green 1x6 brick, scroll brick
over to the grid board. Attach brick on the right side peg of the brown 1x2
brick so that the green piece has 5 pegs sticking off the right side of the
brown piece with the 6th peg being connected to the brown 1x2 brick. Click
once to attach.
3. In the brick palette screen scroll up to the green 1x4 brick. Click and scroll
brick over to the grid board. Attach brick on top of the left side green 1x6
brick so that the right edges of the two bricks are directly stacked on one
another. Click once to attach. (Figure 1.3)
Figure 1.3
4. In the brick palette screen click on another 1x4 brick and scroll over to the
grid board. Attach brick on top of the right side green 1x6 brick so that the
6
left edges of the two bricks are directly stacked on one another. Click once
to attach.
5. In the brick palette screen scroll up to the green 1x3 brick. Click and scroll
brick over to grid board. Attach brick on top of the left side green 1x4 brick
so that the right edges of the two bricks are directly stacked on one
another. Click once to attach.
6. In the brick palette screen click on another 1x3 brick and scroll over to the
grid board. Attach brick directly on top of the right side green 1x4 brick so
that the left edges of the two bricks are directly stacked on one another.
Click once to attach.
7. In the brick palette screen scroll down to the green 1x4 brick. Click and
scroll brick over to the grid board. Attach brick on top of the two green 1x3
bricks in the exact middle. The green 1x4 brick should attach to two pegs
on each of the green 1x3 bricks. Click once to attach. (Figure 1.4)
Figure 1.4
8. In the brick palette screen scroll up to the green 1x2 brick. Click and scroll
brick over to the grid board. Attach brick on top of the green 1x4 brick in
the exact middle. This will leave one peg on each side of the 1x4 brick
exposed. Click once to attach.
9. In the brick palette screen click on another green 1x2 brick and scroll over
to the grid board. Attach brick directly on top of the green 1x2 brick that is
already on the tree. Click once to attach. (Figure 1.5)
Figure 1.5
7
Lights for the Tree Instructions
1. In the brick palette screen scroll up to the pink 1x1 brick. Click and scroll
brick over to the grid board. Attach brick on the left side bottom green “tree
limb” on the second interior peg. Click once to attach. (Figure 1.6)
Figure 1.6
2. In the brick palette screen click on another pink 1x1 brick and scroll over
to the grid board. Attach brick on the right side bottom green “tree limb” on
the second interior peg. Click once to attach
3. In the brick palette screen click on the red 1x1 brick and scroll over to the
grid board. Attach brick on top of the left side green “tree limb” located
second from the bottom. Click once to attach.
4. Repeat step 3 except put the red 1x1 brick on the right side. (Figure 1.7)
Figure 1.7
8
5. In the brick palette screen scroll up to the orange 1x1 brick. Click and
scroll brick over to the grid board. Attach brick on top of the left side green
“tree limb” located third from the bottom. Click once to attach.
6. Repeat step 5 except put the orange 1x1 brick on the right side.
7. In the brick palette screen click on the pink 1x1 brick and scroll over to grid
board. Attach brick on top of the left side green “tree limb” located fourth
from the bottom. Click once to attach.
8. Repeat step 7 except put the pink 1x1 brick on the right side.
9. In the brick palette screen scroll down to the 1x2 yellow brick. Click and
scroll brick over to the grid board. Attach brick directly on top of the green
1x2 bricks. Click once to attach. (Figure 1.8)
Figure 1.8