Escolar Documentos
Profissional Documentos
Cultura Documentos
American Association of State Highway and Transportation Officials (AASHTO) specification ANSI/AASHTO/AWS D1.5-95 Bridge Welding Code includes AASHTO/AWS Fracture Control Plan (FCP) for Nonredundant Members. Under this specification, Heat and Lot testing is not required if the welding consumable is produced under a continuing quality assurance program which has been audited and approved by ABS, Lloyds Register of Shipping, or ASME. Also, Diffusible Hydrogen Testing is not required as long as the Certificate of Conformance lists diffusible hydrogen testing results which meet the level required by the specification. American Bureau of Shipping (ABS) approvals are issued subject to the Bureaus Rule requirement for Materials and Welding Part 2. Tests are conducted in the companys plant, under supervision of an ABS surveyor to determine if electrodes conform to ABS grades or AWS specifications previously judged satisfactory by ABS for welding vessels. The Bureau publishes a list of approved electrodes giving their class and approved operating positions for each size. Sometimes, where there is no approved specification, approval may be given on the basis that each individual shipyard or contractor will qualify the procedure and electrode subject to Part 2, Section 3, paragraph 2/3C.3.2.c. American Society of Mechanical Engineers (ASME) has issued specifications covering construction of nuclear facilities. Each lot of welding consumables to be used must be individually tested to ASME SFA specifications. American Welding Society (AWS) specifications and classifications are established by the Society to provide standards for different types of electrodes throughout the industry. AWS does not test or approve any electrodes. The manufacturer certifies that their electrode conforms to a certain class. (See PCX.xx section for AWS classes for each electrode.) Canadian Welding Bureau (CWB) approvals are based on tests witnessed by a CWB representative. Approvals listed in this booklet are for products manufactured in the USA. Products manufactured in Canada are approved separately. In general, CWB specifications are similar to AWS specifications. Copies of approvals are maintained in Cleveland and are available upon request. Department of Transportation (Bureau of Public Roads) requires that the contractor shall furnish a certified copy of a dated annual report of results of all pertinent required tests of AWS A5.1, A5.5, or other AWS specifications, as appropriate, made on electrode of the same class, size and brand and which was manufactured by the same process and with the same materials as the electrode being furnished for use on the project. Welding on main members shall be capable of producing weld metal having impact strength of at least 20 ft-lbs., Charpy V-notch at a temperature of 0F or below. These Certificates of Conformance to Requirements are available on request. Lloyds Register (LR), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Bureau Veritas (BV), Controlas, and Nippon Kaiji Kyokai (NKK) issue approvals for electrodes used worldwide in shipbuilding, offshore structures and pressure vessels. Products approved under the rules of these classification societies require annual requalification under the supervision of their surveyors. TV (TUV) is a German agency very similar to ASME. Projects manufactured under TUV rules must be welded with consumable approved by TUV. Initial approvals are obtained based on testing completed under TUV supervision. Approvals are maintained subject to Quality Assurance audits completed every two years. U.S. Coast Guard has formally adopted the American Bureau of Shipping list of approved electrodes. Deutche Bahn (DB) is the approval agency for German railroads. Approvals are based on tests specified by DB, and witnessed by an authorized third party.
TABLE OF CONTENTS
Description
Page No.
Position Notation Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Military Qualified Stick Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Military Qualified MIG and Submerged Arc Electrodes and Fluxes . . . . . . . . . . . .5 Agency Qualified Stick Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Agency Qualified Flux-Cored Self-Shielded Electrodes . . . . . . . . . . . . . . . . . . . . .8 Agency Qualified MIG Electrode and Gas Combinations . . . . . . . . . . . . . . . . . .10 Agency Qualified Flux-Cored Gas-Shielded Electrode/Gas Combinations . . . . .12 Agency Qualified Submerged Arc Flux/Electrode Combinations . . . . . . . . . . . . .14 A.W.S. Classifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 International Approvals of U.S. Manufactured Products . . . . . . . . . . . . . . . . . . .18 Special Customer Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Lincoln Electric Quality Assurance Programs . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Customer Assistance Policy The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information of advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customers particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products. Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying this type of fabrication methods and service requirements.
Lincoln Electrode Fleetweld 5P Fleetweld 35 Fleetweld 35 Fleetweld 7 Fleetweld 37 Jetweld 2 Shield-Arc 85 Jetweld 3 Jetweld LH-70 Lincoln 7018 MR Jetweld LH-75 MR Jet-LH 8018-C3 MR Jetweld LH-100M1 MR Jetweld LH-110M MR Lincoln 11018 MR Lincoln 10018 M1 MR Lincoln 10718 MR Red Baron 308L MR
Type MIL-6010(1) MIL-6011(1) MIL-G-6011(1) MIL-6012(1) MIL-6013(1) MIL-6027(1) MIL-7010-A1 MIL-7024(1) MIL-7018 MIL-7018 MIL-7018-M MIL-8018-C3
Class 1 1 2 1 2 1 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3
Approved Electrode Diameter 3/32, 1/8, 5/32,3/16 3/32, 1/8, 5/32, 3/16 1/4 1/8, 5/32, 3/16 1/4 1/8, 5/32, 3/16 3/32, 1/8, 5/32, 3/16 5/32, 3/16, 7/32, 1/4 1/8, 5/32 1/8, 5/32, 3/16, 7/32, 1/4 3/32, 1/8, 5/32 3/16, 7/32, 1/4 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16, 7/32, 1/4 3/32, 1/8, 5/32 3/16, 7/32, 1/4 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16, 7/32 3/32, 1/8, 5/32 3/16, 7/32 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16 1/8, 5/32, 3/16 3/32, 1/8, 5/32 3/16 3/32, 1/8, 5/32 3/16 3/16, 1/4
Test Reference No. and Comments CL-9L-6 4926 K-3 and K-10 CL-9L-8 4926-K-3 & K-10 NAES-38022-48 and NAES-3801 2-49 4926 K 1 and K 2 MAT. LAB 5606-1 LECO report of 25 Jan. 61 EES-6675-AN and G-4 CL-9L-3 ITL-4294 and CL-9 CL-6AR-1 ,-3 CL-9L-17 CL-9L-4, -12, -13 MINSY RPT.CL-9L-19 138-27-80 CL-9L-1, -7, -10, -11, -14, -20 CL-6AR-3, -24 CL-6AR-36 LE-91-51 LE-91-51 LE-91-51 LE-91-51 LE-91-51 ITL-959-NJ EES-920012 (52) ITL-959-NJ and NAMC Itr. XM-72-WJF: CO-L18/8(6985) of 5/23/57 NYK MATL. LAB. 5899-4 (Part 2)
MIL-E-0022200/10C MIL-10018-M1 MIL-E-22200/1 MIL-E-22200/1 MIL-E-22200/10C PPD 802-6337513 MIL-E-22200/2D MIL-11018-M MIL-11018-M MIL-10018-M1 MIL-10718-M MIL-308L-16 MIL-308-16 MIL-309-16, MIL-309L-16 MIL-316-16, MIL-316L-16 MIL-347-16 MIL-347-15 MIL-347-16
Red Baron 308/308H MR MIL-E-22200/2D Red Baron 309/309L MR Red Baron 316/316L MR Red Baron 347 MR Stainweld 347-15 Stainweld 347-16 MIL-E-22200/2D MIL-E-22200/2D MIL-E-22200/2D MIL-E-22200/2C MIL-E-22200/2C
Wearweld
MIL-E-19141
1-A2c
3 = Flat only
(1) Specification QQ-E-450a was cancelled by the General Services Administration effective December 24, 1985. Per their instructions, future
procurements should be made in accordance with AWS A5.1+. NOTE: Electrodes are tested by an authorized testing laboratory under supervision of military personnel. When tests shown conformity with military specification, approval is given and the electrode is placed on the government Qualified Products List (Q.P.L.) Periodic retesting is required under most electrode specifications. Certain specifications do not call for qualification and have no Q.P.L. Products supplied under military specifications must undergo lot or batch tests with each order. Such items are noted under Comments. Revision suffixes are not included herein because they do not appear on the Q.P.L. and have no bearing on qualification of the product. BR-41 REQUIRES THAT ALL ORDERS OR BIDS FOR GOVERNMENT AGENCIES MUST BE PROCESSED THROUGH THE FACTORY.
CONSUMABLE QUALIFICATIONS GUIDE MILITARY QUALIFIED PRODUCTS MIG, FLUX-CORED AND SUBMERGED ARC ELECTRODES AND FLUXES
Electrode or Flux L-60 Electrode L-61 Electrode L-70 Electrode L-60 Electrode* L-61 Electrode* L-70 Electrode* L-50 Electrode* L-56 Electrode* L-56B Electrode* LA-90 Electrode* LA-100 Electrode* 760 Flux 780 Flux 860 Flux 880 Flux 880M Flux 882 Flux 761 Flux (with L-61)* 780 Flux (with L-60)* 780 Flux (with L-61)* 860 Flux (with L-60)* 860 Flux (with L-61)* 860 Flux (with L-70)* 960 Flux (with L-61)* 880M Flux* 980 Flux* MIL800 Flux* MIL800 Flux* MIL800-H Flux* MIL800-H/LA-100* MIL800-H/MC-100* Innershield NR-232* Outershield 70* Outershield 71* Outershield 71-HYM* Outershield 71-HYC* Outershield 71M* Outershield 75-H* Outershield 81 Ni1-H* Outershield 91K2-H* Outershield MC-100* MIL Specification MIL-E-18193B(1) MIL-E-18193B(1) MIL-E-18193B(1) MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/1D & 1E MIL-E-23765/1D & 1E MIL-E-23765/1E MIL-E-23765/2D & 2E MIL-E-23765/2C, 2D -Amd 1, & 2E MIL-F-18251C(1) MIL-F-18251C(1) MIL-F-18251C(1) MIL-F-18251C(1) MIL-F-18251C(1) MIL-F-18251C(1) MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/4 MIL-E-23765/4 MlL-E-23765/2D-Amd 1 MIL-E-23765/1E MIL-E-23765/1E MlL-E-23765/2D-Amd 1 MIL-E-23765/2E MlL-E-23765/2D-Amd 1, & 2E MlL-E-23765/2D-Amd 1 MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/1D MIL-E-24403/2C MlL-E-23765/2D-Amd 1, & 2E Product Classification Type MIL-A1 Type MIL-B1 Type MIL-A2 Type MIL-EL12 Type MIL-EM12K Type MIL-EA1 Type MIL-70S-3 Type MIL-70S-6 Type MIL-70S-6 Type MIL-80S-3 Type MIL-100S-1 Type MIL-F1 Type MIL-F2 Type MIL-F3 Type MIL-F4 Type MIL-F4 Type MIL-F4 Type MIL-F7A2-EM12K Type MIL-F7A0-EL12 Type MIL-F7A2-EM12K Type MIL-F6A2-EL12 Type MIL-F7A2-EM12K Type MIL-F7A2-EA1-A2 Type MIL-F7A2-EM12K Type MIL-100S-1F Flux Type MIL-70S-3F Type MIL-70S-6F Type MIL-100S-1F Type MIL-100S-1F & 2F Flux - Type MIL-100S-2F Wire - Type MIL-100S-2 Flux - Type MIL-100S-2CF Wire - Type MIL-100S-2C Type MIL-71T-8AS Type MIL-70T-1C Type MIL-71 T-1C & MIL-71T-1M Type MIL-71T-1-HYM Type MIL-71T-1-HYC Type MIL-71T-1M Type MIL-71T-1C Type MIL-70T-5-HYM Type MIL-81T1-Ni1-HYM Type MIL-101TM Type MIL-100S-2C Approved Electrode Diameters Test Reference Number and Comments
5/64,3/32,1/8,5/32,3/16,7/32 1/16,5/64,3/32,1/8,5/32,3/16 5/64,3/32,1/8,5/32,3/16 All Sizes All Sizes All Sizes All Sizes All Sizes
LE-90-39 LE-90-40 LE-90-41 LE-90-42 LE-90-43 LE-90-43 LE-94-3 CL-9L-15 LE-90-45 LE-90-46 CL-9L-15 LE-91-47, 91-52-A CL-9L-15 LE-91-48, 91-52-B CL-9L-18 CL-9L-24 CL-9L-24 LE-89-33 LE-89-33 LE-91-50 LE-89-32 LE-89-34 LE-89-35 LE-89-37, 91-48, 91-52-B
3/32, 1/8, 5/32 3/32, 1/8 .068, .072* 1/16, 5/64, 3/32, 1/8 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16, .072 .045, 1/16 .045, 1/16 .045, 1/16 .035, .045, 1/16, 3/32, 1/8
NOTE: Lot inspection is required with each order. The products marked with an (*) are listed on a Qualified Products List (QPL). (1) MIL-E-18193B and MIL-F-18251C specs have been cancelled by the U.S. Navy. Future acquisitions should be to MIL-E-23765/4.
Electrode Fleetweld 5P Fleetweld 5P+ Fleetweld 35 Fleetweld 35LS Fleetweld 7 Fleetweld 37 Fleetweld 47 Jetweld 1 Jetweld 3 Jetweld 2 Jetweld LH-70
Electrode Diameter 3/32, 1/8, 5/32, 3/16 3/32, 1/8, 5/32, 3/16 3/16 and smaller 7/32, 1/4 5/32 3/16 and smaller 7/32, 1/4 3/16 and smaller 1/8, 5/32 3/16, 7/32, 1/4 1/4 and smaller 1/4 and smaller 1/4 and smaller 5/32 and smaller 3/16, 7/32, 1/4 5/16 3/32, 1/8, 5/32 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 3/32, 1/8, 5/32, 3/16 3/32, 1/8, 5/32, 3/16 3/32, 1/8, 5/32, 3/16 5/32, 3/16, 7/32, 1/4 1/8, 5/32, 3/16, 1/4 1/8, 5/32, 3/16, 7/32, 1/4 1/8, 5/32, 3/16 3/32, 1/8, 5/32, 3/16 1/8, 5/32, 3/16, 7/32, 1/4 3/32, 1/8, 5/32, 3/16, 7/32 3/32, 1/8, 5/32, 3/16 3/32, 1/8, 5/32, 3/16 3/32, 1/8 3/32, 1/8, 5/32 3/32, 1/8 3/32, 1/8, 5/32, 3/16 3/32, 1/8 3/32, 1/8, 5/32, 3/16 5/32 and smaller 3/16 5/32 and smaller 3/16, 1/4 5/32 and smaller 3/16, 1/4 5/32 and smaller
Grade 3 3 3 3 1 1 3 3,3YH5
Jetweld LH-73 Jetweld LH-75 MR Jet-LH 78 MR Excalibur 7018 Excalibur 7018-1 Lincoln 7018 M MR Jetweld LH-3800 Jet-LH 8018-C1 MR Jet-LH 8018-C3 MR Shield Arc 70+ Shield Arc 85 Jetweld LH-110M MR Lincoln 11018 MR Red Baron 308L MR Red Baron 308/308H MR Red Baron 308/308L-V MR Red Baron 309/309L MR Red Baron 309/309L-V MR Red Baron 316/316L MR Red Baron 316/316L-V MR Red Baron 347 MR Stainweld 308/308L Stainweld 309-16 Stainweld 310-16 Stainweld 316/316L
E7018 E7018-1 E7018 E7018M, 3-3YH5 E7018M. 3-3YH5 3YH5 E7028, 2-2YH10 E8018-C1 E8018-C3 E8010-G E7010-A1 E11018-M E11018-M E308L-16 E308H-16 E308-15, E308L-15 E309-16, E309L-16 E309-15, E309L-15 E316-16, E316L-16 E316-15, E316L-15 E347-16 E308-16, E308L-16 E309-16 E310-16 E316-16, E316L-16
ABS Position Notations for United States Listings: Normally used for ABS witnessing of an AWS classification. 1 All positions exclusive of Vertical Down 2 Horizontal Fillet and Flat 3 Flat
(1) ABS Position Notations: Normally used for ABS certification. F Flat (downhand) and Horizontal Fillet V Vertical Up V-down Vertical Down OH Overhead H Horizontal (Horizontal/Vertical) HF Horizontal Fillet only ALL All positions exclusive of Vertical Down
Grade 1 1 1 1 3 3Y40H5
Approved Position Flat, Horiz Flat, Horiz Flat Flat Flat All
Grade 1 1 1 1 3 3YH5
Approved Position Flat, Horiz Flat, Horiz Flat Flat Flat All
Grade 1 1 1 1 3 3YHHH
Approved Position Flat, Horiz Flat, Horiz Flat Flat Flat All
Sizes
NK Grade
Approved Position
Lloyds Position Notations D Approved only for Downhand welding and Horizontal Fillet welding (Unless otherwise indicated) X Approved only for Horizontal-Vertical welding V Approved only for Vertical welding (in upward direction except where otherwise indicated) O Approved only for Overhead welding
Innershield Electrode NR-131 NR-202 NR-203M NR-203 MP NR-203 Nickel (1%) NR-203 Nickel C NR-203 Ni C Plus H NR-207 NR-211-MP NR-212 NR-232 NR-305 NR-305 NR-311 NR-311 Ni NR-450-H NS-3M
Sizes 3/32 .068, 5/64 5/64, 3/32 1mm,.068, 5/64, 3/32 5/64, 3/32 5/64 5/64 5/64 .068, 5/64 .045, .068, 5/64 .068, .072, 5/64 5/64 3/32 5/64, 3/32, 7/64 5/64, 3/32, 7/64 5/64 5/64, 3/32, .120
ABS Grade 3SA-3YSA 3SA-3YSAH15 3SA-3YSA 3SA 4SA-4YSAH10 3SA-3YSAH15 2SA-2YSA 2SA-2YSA 2SA-2YSA 3SA-3YSAH10
ABS Position Notations for United States Listings: Normally used for ABS witnessing of an AWS classification. 1 All positions exclusive of Vertical Down 2 Horizontal Fillet and Flat 3 Flat
(1) ABS Position Notations: Normally used for ABS certification. F Flat (downhand) and Horizontal Fillet V Vertical Up V-down Vertical Down OH Overhead H Horizontal (Horizontal/Vertical) HF Horizontal Fillet only ALL All positions exclusive of Vertical Down
Lloyds Position Notations D Approved only for Downhand welding and Horizontal Fillet welding (Unless otherwise indicated) X Approved only for Horizontal-Vertical welding V Approved only for Vertical welding (in upward direction except where otherwise indicated) O Approved only for Overhead welding
Grade IIIYMS H15 IIIYMSH15 IIIMS H15(2) IIIYMS H15 IIIYMS H15 IIYMS IIYMS IIIYMSH10
Approved Position All(1) All(1) All(1) All(1) All Flat Flat All
CONSUMABLE QUALIFICATIONS GUIDE AGENCY APPROVALS MIG ELECTRODE AND GAS COMBINATIONS
A. B. S. & Coast Guard Approval Electrode/Gas Combination L50/CO2 L50/75% Argon -25% CO2 L56/CO2 L56/75% Argon -25% CO2 Blue Max MIG 308LSi Blue Max MIG 309LSi Blue Max MIG 316LSi SuperGlaze 5183/Argon SuperGlaze 5356/Argon Sizes .030,.035,.045,.052,1/16 .030, .035, .045, .052, 1/16 .035, .045, .052, 1/16 .035, .045, .052, 1/16 AWS Classification Approved Position ABS Grade 3SA-3YSA 3SA-3YSA 3SA-3YSA 3SA-3YSA Approved Position All All All All Lloyd's Register Grade 3S-3YS 3S-3YS 3S-3YS 3S-3YS Approved Position All All All All
.030 - 1/16 .030 - 1/16 .030 - 1/16 .040 - 1/16 .040 - 1/16
All All
WC WB
All All
ABS Position Notations for United States Listings: Normally used for ABS witnessing of an AWS classification. 1 All positions exclusive of Vertical Down 2 Horizontal Fillet and Flat 3 Flat
(1) ABS Position Notations: Normally used for ABS certification. F Flat (downhand) and Horizontal Fillet V Vertical Up V-down Vertical Down OH Overhead H Horizontal (Horizontal/Vertical) HF Horizontal Fillet only ALL All positions exclusive of Vertical Down
Lloyds Position Notations D Approved only for Downhand welding and Horizontal Fillet welding (Unless otherwise indicated) X Approved only for Horizontal-Vertical welding V Approved only for Vertical welding (in upward direction except where otherwise indicated) O Approved only for Overhead welding
10
CONSUMABLE QUALIFICATIONS GUIDE AGENCY APPROVALS MIG ELECTRODE AND GAS COMBINATIONS
Det Norske Veritas Grade IIIYMS IIIYMS IIIYMS IIIYMS Approved Position All All All All Germanischer Lloyd Grade Approved Position Bureau Veritas Grade Approved Position Nippon Kaiji Kyokai Sizes Grade Approved Position
5183 5356
All All
All All
WC WB
All All
11
CONSUMABLE QUALIFICATIONS GUIDE AGENCY APPROVALS FLUX-CORED GAS-SHIELDED ELECTRODE/ GAS COMBINATIONS
A. B. S. & Coast Guard Approval Electrode/Gas Combination Outershield 70-CO2 Outershield 71-CO2 Outershield 71 Elite CO2 Outershield 71 Elite -75%Ar/25%CO2 Outershield 71-M -CO2 Outershield 71-M -75% Ar/25% CO2 Outershield 71 HYM -75% Ar/25% CO2 Outershield 712 C -CO2 Outershield 712 M -75% Ar/25% CO2 Outershield MC-710 -75% Ar/25% CO2 Outershield MC-710 -90% Ar/10% CO2 Outershield MC-710XL -90% Ar/10% CO2 Outershield 81K2-H -75% Ar/25% CO2 Outershield 81Ni1-H -75% Ar/25% CO2 Outershield XLH-70 -CO2 Blue Max FC-308L-CO2 Blue Max FC-308L75-80% Ar/Balance CO2 Blue Max FC-309L-CO2 Blue Max FC-309L75-80% Ar/Balance CO2 Blue Max FC-316L-CO2 Blue Max FC-316L75-80% Ar/Balance CO2 Blue Max FCP-308L-CO2 Blue Max FCP-308L75-80% Ar/Balance CO2 Blue Max FCP-309L-CO2 Blue Max FCP-309L75-80% Ar/Balance CO2 Blue Max FCP-316L-CO2 Blue Max FCP-316L75-80% Ar/Balance CO2 AWS Classification E308LT0-1 E308LT0-4 E309LT0-1 E309LT0-4 E316LT0-1 E316LT0-4 E308LT1-4 E308LT1-4 E309LT1-1 E309LT1-4 E316LT1-1 E316LT1-4 Approved Position Flat Flat Flat Flat Flat Flat All All All All All All ABS Grade 2SA-2YSAH15 2SA-2YSAH15 3SA-3YSAH10 3SA-3YSAH10 3SA-3YSAH10 3SA-3YSAH10 3SA-3YSAH5 3SA-3YSAH10 3SA-3YSAH10 3SA-3YSA 3SA-3YSA 3SA-3YSAH10 4Y40SAH5 3SA-3YSAH10 3SA-3YSAH5 All All Flat 4SY40H5 4SY40H10 All All Approved Position Flat All All All All All All All All Flat Flat Lloyd's Register Approved Position Flat All All All All All All All Flat Flat
Sizes 1/16, 5/64, 3/32 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, .052, 1/16 .045, 1/16 .045, 1/16 3/32 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16 .045-1/16
Grade 2S-2YSH15 2S-2YSH15 3S-3YSH10 3S-3YSH10 3S-3YSH10 3S-3YSH10 3S-3YSH10 3S-3YSH10 3S-3YSH15 3S-3YSH15
12
CONSUMABLE QUALIFICATIONS GUIDE AGENCY APPROVALS FLUX-CORED GAS-SHIELDED ELECTRODE/ GAS COMBINATIONS
Det Norske Veritas Approved Position Flat Flat All All All All All All Flat Flat 3YHS All 3YSAMHH All Germanischer Lloyd Approved Position All All All All Bureau Veritas Approved Position All All All All Nippon Kaiji Kyokai Approved Position All
Grade IIYMS(H15) IIYMS(H15) IIIYMS(H10) IIIYMS(H10) IIIYMS(H10) IIIYMS(H10) IIIYMS(H10) IIIYMS(H10) IIIYMS IIIYMS
IV Y46MS(H5) IVYMS(H10)
All All
5YHHS
All
All
13
A. B. S. & Coast Guard Approval Flux/Electrode Combination 760/L60 761/L60 761/L61 761/L70 (triple tandem) 780/L60 780/L61 780/L70 781/L50 781/L61 8500/L61 8500/LS3 8500/LA81 8500/LA85 8500/LA90 860/L60 860/L61 880M/L50 880M/L56 882/L61 880/LAC M2 880/LAC Ni2 960/L50 960/L61 Blue Max S308/308L Blue Max S309/309L Blue Max S316/316L AWS Classification F6A2-EL12 F7A2-EL12 F7A2-EM12K F7A0-EL12 F7A2-EM12K F7A0-EM13K F7A0-EM12K F9A2-EA3K-A3 F6A2-EL12 F7A2-EM12K F7A6-EM12K F11A6-ECM2-M2 F7P10-ECNi2-Ni2 F7A2-EM13K F7A2-EM12K ER308/ER308L ER309/ER309L ER316/ER316L Approved Position 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ABS Grade 3M, 3YM 3YT 4M-4YM 4M-4YM 3M-3YM 3M-3YM Approved Position F F F F F F
Grade 3M-3YM 2M-2YM 2M-2YM 2YM 4YMH10 4YMH10 4YMH10 3M-3YM 3M-3YM 3M-3YM
ABS Position Notations for United States Listings: Normally used for ABS witnessing of an AWS classification. 1 All positions exclusive of Vertical Down 2 Horizontal Fillet and Flat 3 Flat
(1) ABS Position Notations: Normally used for ABS certification. F Flat (downhand) and Horizontal Fillet V Vertical Up V-down Vertical Down OH Overhead H Horizontal (Horizontal/Vertical) HF Horizontal Fillet only ALL All positions exclusive of Vertical Down
Lloyds Position Notations D Approved only for Downhand welding and Horizontal Fillet welding (Unless otherwise indicated) X Approved only for Horizontal-Vertical welding V Approved only for Vertical welding (in upward direction except where otherwise indicated) O Approved only for Overhead welding
14
Grade IIIYM IIIYTM IIYMT IVYM IVYM IVYT IVYM IIIYM, IIYT VYM for NV2-4 & NV4-4 IIIYM
Grade
15
Lincoln Product Blue Max MIG 308L Si Blue Max MIG 309L Si Blue Max MIG 316L Si Blue Max FC308L/CO2 Blue Max FC309L/CO2 Blue Max FC316L/CO2 Super Arc L-50/CO2 SuperGlide S-3/CO2 SuperArc L-54/CO2 SuperArc L-56/CO2 SuperGlide S-6/CO2 ValueArc S-6/CO2 SuperArc LA-75/Ar + 1-5% O2 SuperArc LA-75/92 Ar-8% CO2 SuperArc LA-90/CO2 SuperArc LA-90/Ar + 1-5% O2 SuperArc LA-100/Ar + 2% O2 SuperGlaze 4043 SuperGlaze 5356
Canadian Welding Bureau Class ER308L Si ER309L Si ER316L Si E308LT0-1 E309LT0-1 E316LT0-1 ER49S-3 ER49S-3 ER49S-4 ER49S-6 ER49S-6 ER49S-6 ER80S-Ni1 ER80S-Ni1 ER80S-D2 ER90S-D2 ER100S-G ER4043 ER5356 E492T-9-H16 E492T-9-H16 E492T-9-H16 E491T-9-H16 E491T-9M-H16 E491T-9-H16 E491T-9M-H16 E491T-9-H16 E491T-9-H16 E491T-9M-H16 E491C-6M-H16 E491C-6M-H16 E491C-6M-H16 E80T1-K2M-H16 E81T1-Ni1M-H8 E110C-G-H4 E492T-4-H16 E71T8-Ni1-H16 E491T-8-H16 E71T8-K6-H16 E491T-11-H16 E71TG-G-CH E491T-8-H16 E492T-6-H16 E492T-7-H16 E4310 E4310 E4311 E4311 E4311 E4313 E4313 E4914 E4918 E4918 E4918
Lincoln Product Jetweld LH-70 Jet-LH 78MR Excalibur 7018-1 Jetweld 1 Jetweld LH-3800 Jet LH-8018-C1-MR Jet LH-8018-C3-MR ShieldArc 85 ShieldArc HYP ShieldArc HYP+ Shield-Arc 70+ Shield-Arc 80 Lincoln LH-D80 Lincoln LH-D90 Lincoln LH-D100 Lincoln 11018MR Red Baron 308/308H MR Red Baron 308/308H MR Red Baron 308L MR Red Baron 309/309L MR Red Baron 309/309L MR Red Baron 310 MR Red Baron 316/316L MR Red Baron 316/316L MR Red Baron 347 MR Blue Max 308 AC/DC Blue Max 308L AC/DC Blue Max 309 AC/DC Blue Max 309L AC/DC Blue Max 316 AC/DC Blue Max 316L AC/DC Blue Max S308/308L Blue Max S309/309L Blue Max S316/316L Flux/Wire Combinations Lincolnweld 760/L-60 (2) Lincolnweld 760/L-61 (2) Lincolnweld 761/L-60 (2) Lincolnweld 761/L-61 (2) Lincolnweld 761/L-70 (1) Lincolnweld 780/L-16 (2) Lincolnweld 780/L-60 (2) Lincolnweld 780/L-61 (1) (2) Lincolnweld 781/L-50 (1) (2) Lincolnweld 781/L-61 (1) (2) Lincolnweld 860/L-61 (2) Lincolnweld 880M/L-50 (2) Lincolnweld 882/L-61 (2) Lincolnweld 960/L-61 (1) (2) Lincolnweld 960/LA-75 (1) Lincolnweld 980/L-50 (1) Lincolnweld 980/L-61 (1) Lincolnweld 980/LA-75 (1) Lincolnweld 980/LC-72 (1) Lincolnweld AXXX10/L-61 (2)
Canadian Welding Bureau Class E4918-1 E4918-1 E4918-1 E4924-1 E4928 E5518-C1 E5518-C3 E4910-A1 E4910-G E4910-P1 E5510-G E5510-G E5518-G E6218-G E6918-G E7618-M E308-16 E308H-16 E308L-16 E309-16 E309L-16 E310-16 E316-16 E316L-16 E347-16 E308-26 E308L-26 E309-26 E309L-26 E316-26 E316L-26 ER308L ER309L ER316L
Outershield 70/CO2 Outershield 70C/CO2 Outershield HD-70/CO2 Outershield 71/CO2 Outershield 71/Ar + 20-25% CO2 Outershield 71M/CO2 Outershield 71M/Ar + 20-25% CO2 Outershield 712C/CO2 Outershield 71 Elite/CO2 Outershield 71 Elite/Ar + 20-25% CO2 Outershield MC-710/Ar + 20-25% CO2 Outershield MC-710XL/Ar + 8% CO2 Outershield MC-710XL/Ar + 20-25% CO2 Outershield 81K2-H/Ar + 20-25% CO2 Outershield 81Ni1-H/Ar + 20-25% CO2 Outershield MC-1100/Ar + 10% CO2 Innershield NS-3M Innershield NR-203Ni1% Innershield NR-203MP Innershield NR-207 Innershield NR-211MP Innershield NR-212 Innershield NR-232 Innershield NR-305 Innershield NR-311 Fleetweld 5P Fleetweld 5P+ Fleetweld 35LS Fleetweld 180 Fleetweld 35+ Fleetweld 37 Fleetweld 37+ Fleetweld 47 Lincoln 7018AC Jetweld LH-73 Excalibur 7018
F43A3-EL12 F49A3-EM12K F49A3-EL12 F49A3-EM12K F9A0-EA1-G F49A2-EL12 F49A2-EL12 F49A3-EM12K F49A2-EM13K F49A2-EM12K F49A3-EM12K F49A5/EM13K F49A6-EM12K F49A3-EM12K F8A2-ENi1K-N F49A2-EM13K F49A3-EM12K F8A2-ENi1K-N F49A3-EC1 F7A4-EM12K-Ni1
16
Lincoln Product Approved by JIS Product Outershield 71M/CO2 Outershield MC702/CO2 Standard Z3313 Z3313 Classification YFL-C503R YFW-C502M
Lincoln Product Approved by TUV Fleetweld 5P Fleetweld 5P+ Shield-Arc 70+ Shield-Arc HYP Shield-Arc 85 Innershield NR-203 Nickel (1%) Innershield NR-203 Nickel (1%)-H Innershield NR-207 Innershield NR-207-H Innershield NR-208-H Innershield NR-232 Innershield NR-400 Innershield NR-400-H Outershield 70 Outershield MC710 SuperArc L56 SuperArc LA100 Lincolnweld L60 Lincolnweld L61 Lincolnweld L70 Lincolnweld 761 Lincolnweld 780 Lincolnweld 781 Lincolnweld 860 Lincolnweld 880 Lincolnweld 880M SuperGlaze 4043 SuperGlaze 5087 SuperGlaze 5183 SuperGlaze 5356 SuperGlaze 5754
Innershield NS-3M Innershield NR-131 Innershield NR-152 Innershield NR-203MP Innershield NR-203 Nickel C Innershield NR-203 Nickel (1%) Innershield NR-203 Nickel (1%)-H Innershield NR-203 Ni C Plus Innershield NR-203 Ni C Plus-H Innershield NR-207 Innershield NR-207-H Innershield NR-208-H Innershield NR-211MP Innershield NR-212 Innershield NR-232 Innershield NR-305 Innershield NR-311 Innershield NR-311 Ni Innershield NR-400 Innershield NR-400-H Innershield NR-450 Innershield NR-450-H
Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313 Z3313
YFW-S50GB YFW-S50GB YFW-S50GB YFW-S50GB YFW-S430B YFL-S503B YFL-S503B YFL-S503B YFL-S503B YFL-S503B YFL-S503B YFW-S50GB YFW-S50GB YFW-S50GB YFL-S503B YFL-S503G YFW-S50GB YFL-S503B YFL-S503B YFL-S503B YFW-S50GB YFW-S50GB
If material is to used on jobs governed by JIS, please contact the Special Order Department for pricing and delivery information.
Lincoln Product Approved by Deutsche Bahn Innershield NS-3M Innershield NR-211MP Innershield NR-305 Innershield NR-203 Nickel (1%) Innershield NR-232 Innershield NR-311 Ni Innershield NR-400 Lincolnweld 761 Lincolnweld 780 Lincolnweld 860 Lincolnweld 980 Supra MIG SuperArc L-56 SuperArc LA100 L-60 L-61 L-70 If material is to used on jobs governed by Deutsche Bahn, and the "U" sign marking is required on the label, please contact the Special Order Department for pricing and delivery information.
Lincoln Product Approved by Controlas Innershield NR-203 Nickel (1%) Innershield NR-203 Nickel C Innershield NR-207 Innershield NR-208-H Innershield NR-232 Innershield NR-400
17
TESTED MATERIALS
Pre-Tested Bonded Stock: If you need immediate access to pre-tested consumables, you can turn to Lincolns bonded stock warehouse which houses consumables that have been individually tested to meet many of the standard industry specifications. Each purchase is accompanied by a certified material test report confirming specific testing criteria you require. It is a very effective solution, saving both time and money.
SPECIAL PACKAGING
Bar Codes: Your companys bar code labels can be placed on consumable packages as small as one pound or as large as 1,000 pound reels or shipping pallets. Custom Packaging/Palletizing: Your special packaging requirements can be accommodated by Lincoln. We have created a wide variety of specially-sized packages such as a 3,200 pound flux bag designed for centralized flux distribution or two pound spools for MIG welding. Generic Wrapping: If you know you want the quality of Lincoln consumables, we can provide you with bulk quantities.
Inquiries may be directed to: The Lincoln Electric Company 22801 St. Clair Avenue Cleveland, OH 44117-1199 FAX: (216) 383-5473 TEL: (216) 383-2550
18
NOTES
19
CANADA
ALBERTA CALGARY T2H 2M3 (403) 253-9600 EDMONTON T6H 2K1 (403) 436-7385 WINNIPEG R3N 0C7 (204) 488-6398 BRITISH COLUMBIA VANCOUVER V3B 7A2 (604) 844-5209 MARITIMES NOVA SCOTIA B2X 3N2 (902) 434-2725 MANITOBA WINNIPEG R3N 0C7 (204) 488-6398 ONTARIO TORONTO M4G 2B9 (416) 421-2600 QUEBEC MONTREAL J5Y 2G3 (514) 654-3121
RUSSIA, AFRICA & MIDDLE EAST Cleveland, Ohio U.S.A. Phone: (216) 481-8100