Escolar Documentos
Profissional Documentos
Cultura Documentos
Flash Card
Rising demands for efciency in nearly all processes require increasingly innovative automation solutions to achieve a more comprehensive and safer utilization of primary equipment. A prerequisite for this is automation systems such as TM 1703 ACP with various communications interfaces and peripheral elements that can be expanded by adding modules.
TM 1703 ACP understands your system TM 1703 ACP allows you to utilize a host of different media for local and remote communication. The universal use of the IEC 60870-5-101/103/104 standards guarantees consistent addressing from acquisition to output. IEC 61850 is also supported. The use of many third-party protocols, however, also ensures the seamless integration into existing automation networks, thereby guaranteeing the long-term protection of your previous investments. Consistently simple engineering An essential aspect in the overall economic assessment of a process is the costs for the erection and maintenance of automation systems. Youre especially on the safe side with the SAT 1703 automation family. Thats because the use of the object-oriented engineering system SAT Toolbox II makes it possible to utilize the properties of the same types of primary units and equipment (such as pumps, circuit-breakers, feeders, etc.) also for the parameter conguration. In addition, the close interfacing with the design tool such as ELCAD ensures the consistent, uniform documentation of the global system all the way down to the circuit diagram level. Open-loop and closed-loop control functions are created in CAEx plus according to IEC 61131-3, thereby considerably reducing the necessary staff training times. SAT Toolbox II allows you to carry out all engineering, from system diagnostics to online testing, also from remote locations.
A TM 1703 ACP is an automation unit within the SAT 1703 system family, consisting of the master control element and the peripheral elements that can be expanded by adding modules and arranged in distributed locations.
Peripheral elements
Technical data
Model number Master control element Peripheral elements Periphery interfacing Power supply CP-6003/CPC65 Processing and communication PE-6400 PE-6401 PS-6620 PS-6630 PS-6632 DI-6100 DI-6101 DI-6102 DI-6103 DO-6200 DO-6212 AI-6300 AI-6303 AI-6307 AI-6310 AO-6380 TE-6420 TE-6450 Periphery interfacing for A x 1703 electrical peripherals bus Periphery interfacing for A x 1703 optical peripherals bus Power supply module 2460 VDC Power supply module 2460 VDC EMC+ Power supply module 110220 VDC EMC+ Binary input 2 x 8, 24/60 VDC Binary input 2 x 8, 110220 VDC Binary input 2 x 8, 2460 VDC 1ms Binary input 2 x 8, 110/220 VDC 1ms Binary output transistor 2 x 8, 2460 VDC Binary output relay 1 x 8, 24220 VDC/230 VAC Analog input 2 x 2, 20 mA/10 mA/10 V Direct transformer input (4 x 220 V, 3 x 6 A) Analog input 2 x 2, 5 mA Analog input 2 x 2 Pt100 Analog output 4 x 20 mA/10 mA/10 V Speed measurement 2 x 2 5 VDC/24 VDC/NAMUR Position measurement 2 x 2 SSI/RS-422
I/O modules
Open-loop and closed-loop control functions Third-party protocols EMC Supply voltage Temperature range
256 kB for user programs, approx. 50,000 variables and signals, 2,000 of which buffered, 250 buffered setpoint values Modbus, DNP 3.0, IEC 61107, ... IEC 60870-2, IEC 60255, IEC 61000, EN 50082, ... 2460 VDC +30 %/20 % Master control element: 25 ... +65 C (depending on hardware conguration) Peripheral element: 25 ... +70 C 5 to 95 % non-condensing (IEC 60654, IEC 60870-2) IEC 60068-2, IEC 60870-2-2 Cl. Bm, IEC 60255-21 Cl. 1 Master control element: 306 x 155 x 75 (W x H x D) Peripheral element: 630 x 127 x 72 (W x H x D) = fully equipped peripheral element with 8 I/O modules
Siemens AG Power Transmission and Distribution Energy Automation Division P.O. Box 4806 90026 Nuremberg Germany www.siemens.com/energy
The information in this document contains general descriptions of the technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract.
Subject to change without prior notice Order-No. E50001-U321-A252-X-7600 Printed in Germany Dispo 06200 TH 345-060135 101790 PA 04062.0
If you have any question about Power Transmission and Distribution, our Customer Support Center is available around the clock. Tel.: +49 180/524 70 00 Fax: +49 180/524 24 71 (Subject to changes, e.g.: 12 ct/min.) E-mail: support.energy@siemens.com www.siemens.com/energy-support