Escolar Documentos
Profissional Documentos
Cultura Documentos
ABOUT THE
C OMPA N Y
Nosstec AB is part of the Nossebro Holding group of companies where Nosstec and the mechanical workshop Nossebro Mekaniska Verkstad can be found. In our group we work with the brands: Nosstec, Titan Rolls and Agromaskiner.
Our roots come from Nossebro Mekaniska Verkstad established in 1923 as a service company to the agricultural industry around the village Nossebro. Very soon the company grew and production of different products to the farmers in the area started. Later on when Lindahl & Nermark (today Luna) came in to the organization production of sheet metal working machines started in the early 70s. Luna was since then the main marketing partner worldwide. One product that especially began to grow was the bending roll machine and today we can proudly present a complete program of manual, driven as well as CNC controlled machines. Our CNC controlled machines were developed already 1994 and is today a sign of high accuracy and robust design for demanding customers in the industry. As of 1st October 2012 Nosstec was established as a sales company where sheet metal working machinery branded as Nosstec will be exclusively marketed worldwide with assistance of a competent network of retailers. In the past the machines were known as Luna and HM. Nosstec believe in a close contact between our production facility and our customers and based on this we can give you as customer a fast support as well as adaptions or developments that will meet your specific needs. Welcome to Nosstec!
BENDING ROLLS
Nosstec offers the market a wide variety of machines, independent if you need one for simple single piece bending roll work of if you produce high volumes of products with high requirements. As a bonus we will support you with a machine with the highest quality on the market.
TECHNOLOGY
Roll setups
The basic setup suitable for less demanding applications but on the other hand a very robust solution. With this kind of setup no prebending is possible to perform.
The most conventional setup for most of our machines. Prebending is possible and products of high quality can be produced.
Setup used in our CNC machine 8344. Suitable for serial production. Very stable design with the lower rolls fixed on one rigid carrier
Setup used in our CNC machines 8268 and 8835. Individual rolls make advanced profiles possible with the most efficient cycle times.
Prebending
In order to produce round tubes or rounded profiles a prebending is a must. Our different roll setups work in different ways as shown here. a) Asymmetrical roll set-up where the sheet metal has to be run from the backside initially thereafter from the front. b) Fixed carrier on 8344 CNC machine make pre-bending and bending operation in the same run direction by tilting backward and forward. c) CNC machine 8268 with individual rolls give a very efficient prebending and bending process. d) CNC machine 8835 work in the same way as 8268 but no tubes can be produced since no lock arm is used for this reflector assigned machine. Fig. b
Fig. c
Fig. a
Fig. d
MANUAL
t max 1,2 mm 25-45 mm
w max 510 mm
V Top roll can be swung out V Cone bending as standard V Light duty production
Stand
-0306 3/06 360 0,6 25 15 -0307 3/07 360 0,7 30 19 -0310 3/10 360 1,0 40 23 -0312 3/12 360 1,2 45 27 -0508 5/08 510 0,8 40 29 -0509 5/09 510 0,9 45 33
4126
-0208 2/08
mm mm mm kg
210 0,8 25 13
4126
-0902
-0902
-1009
-1009
-1009
-1009
-1108
-1108
Stand
Art.no. 4132 -0620 6/20 mm mm mm kg 675 2,0 60 140 -1015 10/15 1010 1,5 60 175 -1212 12/12 1260 1,25 60 215
t max 2,0 mm
60 mm
Capacity Working length (w) Max sheet thickness (400N/mm2) (t) Diameter of rolls () Net weight OPTIONS:
w max 1260 mm
Stand
4132
-0458
-0508
-0607
MANUAL
t max 6,0 mm 90-110 mm
w max 2020 mm
V V V V
Basic and robust Cone bending optional Crowned rolls Heavy duty production
DRIVEN
t max 2,0 mm 60 mm
w max 1260 mm
Frequency inverter
Digital display
Art.no. Capacity Working length (w) Max sheet thickness (400N/mm2) (t) Diameter of rolls () Motor rating Net weight OPTIONS: Hardened and ground rolls Digital readout Frequency inverter
DRIVEN
t max 8,0 mm 90-130 mm
w max 2520 mm
-2010 -2605
-2015 -2605
-2020 -2605
-2030 -2605
-2040 -2605
-2510 -2605
-2515 -2605
-2520 -2605
DRIVEN
t max 6,5 mm 80-140 mm
w max 2540 mm
8266
-1025 10/25
mm mm mm kW kg
Diameter of rolls () Motor rating Net weight OPTIONS: Hardened and ground rolls Art.no. Capacity Working length (w) Max sheet thickness (400 N/mm ) (t)
2
826677 8266
mm mm mm kW kg
Diameter of rolls () Motor rating Net weight OPTIONS: Hardened and ground rolls Art.no. Capacity Working length (w) Max sheet thickness (400 N/mm ) (t)
2
826677 8266
mm mm mm kW kg
Diameter of rolls () Motor rating Net weight OPTIONS: Hardened and ground rolls
826677
-2015
-2020
-2025
-2030
-2035
-2040
-2510
-2515
-2520
-2525
-2530
Optional equipment
Cone bending equipment, includes diagonal setting of bending roll, trailing shoe and handwheel with dial register
Control panel
Frequency inverter
Special rolls
Art.no. 8266-0556 8266-4715 8266-08041 8266-30551 8266-08042 8266-30552 8266-4723 8266-4301
CNC
t max 3,0 mm 40-90 mm
w max 2040 mm
The 8344 40mm machine equipped with cassette for louvers and reflectors
The design of the machine is based on the same principles as the other models of the 8344 series with the exception of the cassette. The rolls are here provided with roller supports along the whole bending length for adjustable crowning of the rolls. The rolls are hardened and have chromium-plated and polished surfaces in order to avoid marks in the sheet. The crowning of the top roll is carried out by means of a crossbeam, which tilts 90 degrees to the cradle, to make room for the bent part of the sheet. The machine with 40 mm diameter rolls is only intended to form aluminium.
Optional equipment
V V V V V V V Adjustable crowning support Chromium-plated rolls Adiprene-coated rolls or rolls with grooves Stacking tables Programmable support arm Additional safety equipment Infeed and outfeed equipment
Art.no. Capacity Working length (w) Max. sheet thickness Alu (250 N/mm ) (t)
2
8344
-401010 10/10
mm mm mm kW m/min kg
Art.no. Capacity Working length (w) Max. sheet thickness steel (400 N/mm ) (t)
2
8344
-550715 7/15
-600720 7/20 740 2,0 60 0,75 6,9 650 -701510 15/10 1540 1,0 70 0,75 8,1 750
-601010 10/10 1020 1,0 60 0,75 6,9 650 -801515 15/15 1540 1,5 80 0,75 9,2 800
-701020 10/20 1040 2,0 70 0,75 8,1 650 -901520 15/20 1540 2,0 90 0,75 10,4 850
-801025 10/25 1040 2,5 80 0,75 9,2 700 -701707 17/07 1790 0,7 70 0,75 8,1 800
-901030 10/30 1040 3,0 90 0,75 10,4 750 -801712 17/12 1790 1,2 80 0,75 9,2 825
-601208 12/08 1250 0,8 60 0,75 6,9 700 -901716 17/16 1790 1,6 90 0,75 10,4 875
-701215 12/15 1290 1,5 70 0,75 8,1 700 -802010 20/10 2040 1,0 80 0,75 9,2 850
-801220 12/20 1290 2,0 80 0,75 9,2 750 -902015 20/15 2040 1,5 90 0,75 10,4 900
mm mm mm kW m/min kg 8344
Diameter of rolls () Motor output Max. working speed Net. weight Art.no. Capacity Working length (w) Max. sheet thickness steel (400 N/mm2) (t) Diameter of rolls () Motor output Max. working speed Net. weight
mm mm mm kW m/min kg
CNC
t max 5,0 mm 110-140 mm
w max 3040 mm
V CNC-control with the capacity to store 200 programs in internal memory and nearly unlimited by attaching an external USB flash drive V Pre-bending and final bending in one cycle V All four rolls are driven V Crowned rolls V Programmable axis V Designed for highest accuracy V Adjustable crowning of the lower roll V Program backup through external computer or attached USB flash drive
8268
-1540 15/40
mm mm mm kW kg
Optional equipment
V V V V V V V V Adjustable crowning support Chromium-plated rolls Adiprene-coated rolls Rolls with grooves Stacking tables Programmable support arm Additional safety equipment Infeed and outfeed equipment
CNC
t max 0,5 mm 35 mm
w max 1890 mm
Art.no. Capacity Working length (w) Max. sheet thickness steel (250 N/mm2) (t) Diameter of rolls () Motor output Max. working speed Net. weight
8835
-1805 18/05
mm mm mm kW m/min kg
Optional equipment
V V V V Stacking tables Infeed automation Outfeed automation Online feeding unit 1700
CONTACT INFORMATION
Nosstecs main office with sales and administration is located in Alingss, a city with long tradition in steel and sheet metal working machinery and equipment. Alingss is located about 50km east of Gothenburg. The production facility Nossebro Mekaniska Verkstad is located in Nossebro, further 45 km north east of Alingss, where also our Demo- and Testcenter can be found.
MALM
Nosstec AB, Kristineholmsvgen 12, 441 39 Alingss, SWEDEN Tel: +46 (0)512 - 298 85 Fax: +46 (0)512 - 298 89 E-mail: info@nosstec.se Web: www.nosstec.se
For copyright reasons all reproduction and copying of the texts, photos, tables and illustrations within this brochure is prohibited without written permission from Nosstec AB.
NOSSTEC REPRESENTATIVE: