Escolar Documentos
Profissional Documentos
Cultura Documentos
SWT-2.3-101
SWT-2.3-108
R ot o r d i a m e t e r : 1 0 1 m
R ot o r d i a m e t e r : 1 0 8 m
SWT-2.3 -101
IEC Class Rotor diameter Blade length Swept area Hub height Power regulation Nominal power Nacelle weight Rotor weight IIB 101 m 49 m 8,000 m
2
SWT-2.3 -108
IEC Class Rotor diameter Blade length Swept area Hub height Power regulation Nominal power Nacelle weight Rotor weight IIB 108 m 53 m 9,150 m2 Site specic Pitch regulated 2,300 kw 82 tons 60 tons
SWT-2.3-101 Optimized energy output in moderate wind conditions The 101-meter rotor is specifically designed to optimize the energy output in areas with moderate wind conditions. The B49 blades pitch regulation optimizes and increases control over energy output. Advanced blade technology also allows for quieter operation, resulting in fewer disturbances to both people and wildlife.
SWT-2.3-108 Extra energy output in low to moderate wind conditions The SWT-2.3-108 offers a superior combination of a large rotor and robust design. The B53 quantum blade of the 108-meter rotor uses Siemens innovative aeroelastic blade design, which allows a larger rotor diameter and higher energy output without increasing structural loads. As a result, the SWT-2.3-108 turbine provides a lower cost of energy in low to moderate wind conditions.
The Siemens G2 platform one of the four new product platforms represents the culmination of an evolutionary process of innovation and refinement to our wind turbines for over 30 years. With thousands of units installed both on and offshore, 2.3-MW turbines are unrivalled in their class when it comes to performance, productivity and availability.
Published by and copyright 2013: Siemens AG Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany Siemens AG Wind Power Lindenplatz 2 20099 Hamburg, Germany siemens.com/wind For more information, please contact our Customer Support Center. Phone: +49 180 524 70 00 Fax: +49 180 524 24 71 (Charges depending on provider) E-mail: support.energy@siemens.com Wind Power Division Order No. E50001-G310-A201-X-7600 Printed in Germany Dispo 34804 c4bs No. 7491 MCS 02.13.1 Printed on elementary chlorine-free bleached paper. All rights reserved. Trademarks mentioned in this document are the property of Siemens AG, its affiliates, or their respective owners. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which may not apply in all cases. The required technical options should therefore be specified in the contract.