Escolar Documentos
Profissional Documentos
Cultura Documentos
Listing
Contents
Epoxy systems
for laminating for R.T.M. processes for "in house" prepreg for translucent laminates for impregnation of porous materials fire retardant for bonding for water and fish tanks for flexible laminating for fuel tank for wood for solvent free coating for foaming 160 to 600 kg/m3 accelerator for casting for filling & fairing for under water application / wet substrate for gelcoating GreenEpoxy
5-6 7 8 8 8 9 9 10 10 11 11 11 12 13 13 14 15 15 16 17 18 18
Multiaxial reinforcements
E glass Carbon Aramid / E glass
Fabrics
Felts Carded for mould making Glass Aramid Carbon Carbon / Aramid Polyester Texalium / Colortex PTFE
19 19 19 19 19 19 19 19 26
19
21
Unidirectionnal reinforcements
Woven E glass Carbon woven with E glass Carbon
20 20 20
Miscellaneous
Products for vacuum Products for infusion Accessories for vacuum or infusion Release agents Stiffeners OMEGA System Epoxy dispensing machine Soft coating Fillers Hand tools & accessories Accessories for kite board manufacturing
22 23 24 25 - 26 27 32 33 28 - 29 30 - 31 31
Core Materials
Soft extruded polyethylene foam 35 kg/m3 SPHERETEX : Fabrics for micro and macro sandwichs AIREX C51.60 : PU foam BALTEK : Balsa C71 ET : PVC foam AIREX : Linear P.V.C foam AIREX : Cross linked P.V.C foam AIREX : Microperforated Cross linked P.V.C foam AIREX : PET Foam AIREX : Foam fire resistant M1F1
27 20 36 34 - 35 36 37 38 39 40 41
SR 1270 SD 4990, SD 4999 (100 / 35 Weight) Laminating and curing at ambient temperature Slow & Fast hardeners are mixable for adjustable working time. SR 1500 SD 2503 / 2505 / 2507 (100/33 Weight) Slow and standard hardeners for laminating and curing at room temperature. Tg 75C SR 1500 SD 7561 (100/33) Long working time. Tg 92C
266,00 44,33 16,00 4,39 1,33 260,00 44,33 15,60 4,30 1,38 238,00 39,27 11,90 4,40 1,19 268,50 42,70 13,42 6,71 1,22 305,80 45,90 15,30 7,70 1,40
1 x 200 1 x 33,33 1 x 12 1 x 3,3 1x1 1 x 200 1 x 33,33 1 x 12 1 x 3,3 1x1 1 x 200 1 x 33 1 x 10 1 x 3,7 1x1 1 x 220 1 x 33 1 x 11 1 x 5,5 1x1 1 x 220 1 x 33 1 x 11 1 x 5,5 1x1
6 x 11 1 x 11 1x4 1 x 1,09 1 x 0,33 6 x 10 10+1 1 x 3,6 1x1 1 x 0,38 4 x 9,5 1 x 6,27 1 x 1,9 1 x 0,7 1 x 0,19 5 x 9,7 1 x 9,7 1 x 2,42 1 x 1,21 1 x 0,22 3 x 28,6 3 x 4,3 1 x 4,3 1 x 2,2 1 x 0,4
SR 1620 SD 2625, SD 2706 (100/19 Weight) Standard and fast hardener High wet out, high tack. Tg 90-97C
SR 1700 SD 2705 / 2706 (100/22 Weight) High modulus. Fast hardeners Highest mechanical properties of our range. Tg 103-109C SR 1700 SD 2801 / 2803 / 2805 / 2806 (100/39 Weight) High modulus. Highest mechanical properties Slow and standard hardeners for laminating and curing. Tg 89-101C SR 1700 SD 7820 (100/36 Weight) Long working time, tooling 120C Tg 140 C
SR 1660 SD 1305 (100/32 Weight) Ultra slow Prepreg and thermoforming. Low exotherm. Tg 165C SD 2630 (100/31 Weight) Ultra slow For laminating or casting tooling, prepreg and thermoforming Low exotherm. Tg 150 C
SD 7820 (100/32 Weight) Slow Prepreg and thermoforming Low exotherm. Tg 150C
Page 5
SR 8200 SD 7201 / 7203 / 7204 / 7206 (100/37 Weight) Tg 92-94C Mixable hardeners
SR 8200 SD 8202 / 8203 / 8205 / 8206 (100/31 Weight) General working conditions, low toxicity, Hardeners mixable
SR 8200 TH 1 SD7201 / 7203 / 7204 / 7206 (100/37 Weight) Thixotropic version of SR 8200 for vertical substrate verticale. Tg 92-94C SR 8500 General working conditions from 20C and warmer temperatures, low toxicity 2 hardeners (ultra slow and ultra fast which can be mixed) SD 8601 Ultra slow (100/35 Weight) Tg 87C
270,00 38,60 16,20 4,05 1,35 261,98 38,93 15,72 3,93 1,31 270,00 38,60
1 x 200 1 x 28,6 1 x 12 1x3 1x1 1 x 200 1 x 28,6 1 x 12 1x3 1x1 1 x 200 1 x 28,6
SR 8500 SD 8202 or SD 8203 (100/31 Weight) Excellent cost / thermal performance ratio Tg 120-123C
SR 8500 TH 2 SD8601 Ultra slow (100/37,5 Weight) Tg 87C Thixotropic version of SR 8500 for vertical substrate verticale. SD 8605 Ultra fast (100/35 Weight) Tg 91C Mixable with SD 8601
270,00 38,60
1 x 200 1 x 28,6
7 x 10 1 x 10
Page 6
SR 8100 Excellent cost/performance ratio SD 8822 (100/31 Weight) Slow hardener Low viscosity. Tg 90C SR 8100 SD 8824 (100/22 Weight) Standard hardener Low viscosity. Tg 81C
SR 8100 SD 8731 (100/22 Weight or 3/1 Volum) Slow hardener, mixable with SD 8734 Low viscosity. Tg 88C
254,00 40,00 15,24 7,11 2,80 254,00 40,00 15,24 7,11 2,80 280,00 36,50 13,86 1,26
1 x 200 1 x 31,5 1 x 12 1 x 5,6 1 x 2,2 1 x 200 1 x 31,5 1 x 12 1 x 5,6 1 x 2,2 1 x 220 1 x 29 1 x 11 1x1
2 x 27 1 x 8,5 1 x 3,24 1 x 1,51 1 x 0,6 2 x 27 1 x 8,5 1 x 3,24 1 x 1,51 1 x 0,6 8 x 7,5 1 x 7,5 1 x 2,86 1 x 0,26
SR 8100 SD 8734 (100/22 Weight or 3/1 Volum) Fast hardener, mixable with SD 8731 Low viscosity. Tg 90C
Page 7
SR 8500 / SZ 8525 (100/25 Weight) Clear system for industrial scale production as skis or leisure items. Tg 114C Typical cycle time: 10min at 100C
SIPREG :Epoxy systems for "in house" prepregs
SR 121 / KTA 21 (100/21 Weight) Cure starting at 90C SR 1258 Epoxy mono composing. Cure starting at 100C Colorless after hardening. Storage in the cold. Life cycle limited to ambient temperature.
242,00 36,32
1 x 200 1 x 30
2 x 21 2 x 3,16
3,00
1x3
SR GLASS ONE Standard clear epoxy system. Tg 78C SD Glass One (100/39 Weight or 2/1 Vol.) or SD 7561, slow hardener
SURF CLEAR (100/38 Weight or 2/1 Vol.) High mechanical performance. Clear epoxy system SD SC, Fast hardener Tg 84C or SD 7561, slow hardener Tg 91C
SR 5311 SD 1010.1 (100/28,5 Weight or 3/1 Vol) Standard hardener Mix viscosity below 100 cPs at 25C
Page 8
retardant system. Intumescent, halogen free. Tg 90C SD 8203 (100/20 Weight) PB270i with DM02 (100/28 Weight) Hardener for thick section
24,90 6,80
1 x 19,5 1x5
3 x 1,8 1 x 1,8
24,15 6,55
1 x 19,5 1x5
3 x 1,55 1 x 1,55
PB370i with DM02 (100/26 Weight) Hardener for thick section PB370i with DM03 (100/23 Weight) Hardener for thick section Fire resistance certifications
1 x 25 1x5 1 x 25 1x5
SR 5700 / SD 5703 Structural thixotrop bonding for superior adhesion Offers possibility to glue most of the material Composites, alloys, plastics (100/44 Weight or 2/1 Volume) Aerobond SR 7300 / SD 7303 (100/40 Weight) Aluminium, laminates, steel & wood structural bonding SR 3-10 / SD 10' Unfilled 10 minutes bonding paste (1/1 Weight or Volume) SR 5600 Ratio in volume 1 / 1
Good adhesion on wet surface
7,00 1,40
1x5 1x1
2x1 1 x 0,4
4,00 1,00
1x2 1 x 0,5
1x2 1 x 0,5
See page 11
Page 9
1 x 20 1x4 1x1
1 x 20 1x4 1x1
1 x 20 1x4 1x1
SD 815 B2 Standard hardener (109% elongation) (100/19 Weight). Post cuisson OBLIGATOIRE
SD 815 B3 Slow hardener (95% elongation) (100/26 Weight). Post cuisson OBLIGATOIRE
SD 815 B4 Ultra slow hardener (100% elongation) (100/26 Weight). Post cuisson OBLIGATOIRE
Page 10
LAMINATING AND BONDING SR 5550 Multi-purpose wood epoxy system SD 5502, 5503, 5504, 5505, 5506 (100/29 Weight or 3/1 Volume)
SR 8450 Multi-purpose wood epoxy system For tropical conditions. SD 8451, 8453, 8454 (100/45 Weight or 2/1 Volume) BONDING SR 5600 Ratio in volume 1 / 1
Good adhesion on wet surface
1 x 200 1 x 26,5 1 x 5,3 1x1 1 x 200 1 x 26,5 1 x 5,3 1x1 1x5 1x1 1 x 0,5
1 x 170 1 x 22,5 1 x 4,5 1 x 0,85 1 x 170 1 x 22,5 1 x 4,5 1 x 0,85 1 x 2,2 1 x 0,44 1 x 0,22
SR 5700 / SD 5703 7,20 Structural for superior adhesion 1,44 p thixotrop y bonding g together 0,72 Composites, alloys, plastics (100/44 Weight or 2/1 Volume) Can works with a very hight pourcentage of moisture contant in the wood. EP 217 1 st coat impregnation diluent for hard wood for SR 5550 & SR 8450 Max dilution 2/1 by Volume
Qty (L) 5,00 1,00 0,50
Page 11
PB170 with DM02 (100/36 Weight) DM 02 Hardener for thick section. Tg 90C PB170 with DM03 (100/31 Weight) DM03 Hardener for thin section. Tg 92C PB170 with DM06 (100/40 Weight or 2/1 Volum) DM06 Hardener for thin section. Tg 90C PB250 / PB400 / PB600 with DM02 (100/36 Weight) (100/37 Weight) (100/35 Weight) DM 02 Hardener for thick section. Tg 85-97C PB250 / PB400 / PB600 with DM03 (100/31 Weight) (100/32 Weight) (100/30 Weight) DM03 Hardener for thin section. Tg 88-92C PB250 / PB400 / PB600 with DM06 (100/40 Weight or 2/1 Volum) DM06 Hardener for thin section. Tg 90C PB250 / SD5602 Slow hardener Does not need post curing. Tg 58-60C. Works on wet surface (100/90 Weight, 1/1 Volum) PB250 / SD5604 Standard hardener Does not need post curing. Tg 58-60C. Works on wet surface (100/90 Weight, 1/1 Volum) PB270i with DM02 (100/28 Weight) Hardener for thick section
1 x 25 1x5 1 x 0,5
24,90 6,80
1 x 19,5 1x5
3 x 1,8 1 x 1,8
24,15 6,55
1 x 19,5 1x5
3 x 1,55 1 x 1,55
PB370i with DM02 (100/26 Weight) Hardener for thick section PB370i with DM03 (100/23 Weight) Hardener for thick section PB350 S with SD1249.17 Sprayable version for 2 K machine Manufacturing of lightened laminate 100/40 Weight or 2/1 Vol.
SR 8500 Unfilled casting system (100/47 Weight) SD 7160 Ultra Slow or SD 1213 Slow For 5L casting and up to 5 cm thick laminate SR 1500 SD 597.20 (100/25 Weight) Casting system For 100L casting with fillers to be added. Minimum post curing at 80C SR 1690 Optical quality casting system SD 7160 (100/49 Weight) Ultra slow hardener
250,00 163,32 40,85 298,00 80,00 14,90 7,45 1,49 63,82 9,74
SR TOPCLEAR SL Optical quality casting system. Depending on the hardener ratio it can gives rigid or flexible casting. SD 1213 (100/86 Weight) SR CA 85 Casting and choking Underwater cure, good fire resistance SD 8451 (100/25 Weight) Slow hardener SD 8601 (100/17.5 Weight) Very slow hardener (SD 8605 accelerator) SD 7160 (100/24 Weight) Ultra slow hardener SD 1213 (100/24 Weight) Ultra slow hardener SR 5311 SD 597.20 (100/34 Weight) Ultra low viscosity, very low exothermic peak Large casting, minimum post-cure at 90C Tg 98C
1 x 25 1x5 1 x 25 1x5
Epoxy accelerator
Quantity in Kg 0,50 0,20 Accelerator Quantity in Kg 1 x 0,5 1 x 0,2
Page 13
Kit for 895 liters of filler Kit for 258 liters of filler Kit for 37 liters of filler Kit for 18 liters of filler Kit for 4 liters of filler
SR 1610 / SD 2613 / Mix'Fill 10 Very light filler formulation for finishing fairing, easy to sand & does not clog sandpaper (100 / 47 / 40 Weight or 2 / 1 / 8 Volume)
Kit for 660 liters of filler Kit for 165 liters of filler Kit for 28 liters of filler Kit for 14 liters of filler Kit for 3 liters of filler
Page 14
SR 632 / SD 7262 (100/48 Weight or 2/1 Vol.) For fast laminating at low temperature temprature.
14,80 1,48
SR 5700 / SD 5703 7,20 Structural for superior adhesion 1,44 p thixotrop y bonding g together 0,72 Composites, alloys, plastics (100/44 Weight or 2/1 Volume) Can works with a very hight pourcentage of moisture contant in the wood. SR CA 85 Casting and choking Underwater cure, good fire resistance SD 8605 (100/17 Weight) Fast hardener SD 8451 (100/25 Weight) Slow hardener
29,32 31,26 6,25 29,32 5,88 31,00 6,20 31,00 6,20
SD 8601 (100/17.5 Weight) Very slow hardener SD 7160 (100/24 Weight) Ultra slow hardener SD 1213 (100/24 Weight) Ultra slow hardener
Gel coat
Detail of the kit (Resin + Hardener) Quantity in Kg 5,00 1,00 Resin Quantity in Kg 1 x 4,57 1 x 0,91 Hardener Quantity in Kg 1 x 0,43 1 x 0,09
SG 162 CS Abrasion resistant gel for tooling with service temp. up to 60C SD 2625 (100/9,5 Weight) Brush viscosity SG 520 Blue For tooling with a service temp. up to 60C. Brush viscosity SD 5202 (100/32 Weight) SG 715 White or black Excellent UV stability, sprayable SD 802 (100/27 Weight) EP 960 Spraying solvent for epoxy gelcoat SG 715. SG 166 GM Black brush For tooling, Tg1 max 148C SD 902 (100/24 Weight) ER Translucent Gel Coat Fast or Slow Translucent Epoxy Gel Coat ED Hardener Service Temperature 70C (100/40 Weight)
4,13 1,32
1 x 3,13 1x1
1x1 1 x 0,32
25,40 6,35 1,27 1,00 0,50 31,00 4,96 1,24 28,00 5,00 1,40
1 x 20 1x5 1x1
Page 15
SICOMIN has researched on the means to decrease the impact of its activity on global warming, proposing today a range of products formulated in this spirit. GRENPOXY 55 is our first epoxy system to be formulated with a high percentage of biomass carbon content. SICOMINs point of view is that it is the carbon assessment, rather than the modified molecules, which is the most representative quality measure. The formulation of an epoxy system is a compromise between various usual characteristics. Traditional organic chemistry offers a vast choice of raw materials, while the green sourced raw materials are still rare. GRENPOXY 55 is an epoxy system with a single hardener, where 55 % of the molecular structure is of plant origin. Modification of the reactivity will be possible, but might reduce the percentage of green components within the product. GRENPOXY 55 has 55 % of its molecular structure originating from plants. We measure this percentage according to the origin of carbons which the molecule contains. The fictitious molecule illustrated below contains 11 carbons, 6 being from biomass origin. It thus contains 55 % of green carbon. The hardener GP 505 follows the same logic and contains a maximum rate of carbon coming from the biomass.
GRENPOXY 55 has an average viscosity enabling the manufacturing of various parts Applications - Hand lamination for tooling or industrial parts - RTM processes (infusion, injection) - Filament winding - Hot or cold press - Casting - Bonding
Detail of the kit (Resin + Hardener) Quantity in Kg 280,10 35,00 7,00 1,40 Resin Quantity in Kg 1 x 200 1 x 25 1x5 1x1 Hardener Quantity in Kg 3 x 26,7 1 x 10 1x2 1 x 0,4
GREENPOXY 55 GP 505 (100 / 40 Weight) Epoxy system to be formulated with a high percentage of biomass carbon content, Tg 74C
GREENONE (100 / 38 Weight) Epoxy system to be formulated with a high percentage of biomass carbon content. Clear epoxy system for sailboards, surfs, models. SD GlassOne (100 / 38 Weight)
Page16
References
Weight in g / sq.m 0 +45 90 55 55 24 108 55 168 312 432 600 850 300 432 152 151 200 224 305 400 500 179 200 200 226 300 339 400 152 151 200 224 305 400 500 179 200 200 226 300 339 400 300 300 -45 Mat 50 331 415 567 850 605 144 288 413 606 850 331 413
Weight g / sq.m 386 520 591 958 710 312 600 630 845 1206 1700 931 1145 304 305 400 448 610 800 1000 438 490 600 552 830 788 1100 550
Approx. Length
roll.(lm)
E Glass Unidirectionnals
L 400/30 L 500 L 600 L 950 L 606/30 LT 300 LT 576 LT 630 LT 850 LT 1212 LT 1700 LT M 600/300 LT M 850/300 BX 300 BX 311 BX 400 BX 450 BX 600 BX 800 BX 1000 BX M 370/80 BX M 390/90 BX M 400/200 BX M 450/100 BX M 600/225 BX M 700/100 BX M 800/300
50
Stitched rovings
Biaxials + CSM
BX 550 HD BX 936 HD TLX 560 TLX 710 TLX 860 TLX 1000 TLX 1200 TLX M 800/300 288 288 288 561 288 288 468 136 209 288 221 476 250 468 136 209 288 221 476 250
TTX 600 TTX 1200 QX 600 QX 700 QX 840 QX 1000 QX 1178 QX M 800/225 QX 1178/225 142 280 285 288 283 288 283
217 300 150 150 150 235 301 170 301 230 225
67 33 68 56 45 40 34 38 28
Quadriaxial + mat
(*) Price by roll of 50-60 Kg. Consult us for prices by quantity. Unidirectionnal and biaxal fabrics can be cut in tape, consult us.
E glass Mutiaxial fabrics can be, on demand, stitched on CSM 100, 225, 300 or 450 g/sq.m. HD : Biaxial fabrics with "High Drape" stitching.
Page 17
Length
roll.(lm)
200
100
Triaxiaux transvers.
(*) Price by roll of 50 kg. Consult us for prices by quantity
C TTX 750
245
268
245
758
53
NB : Fabrics are delivered in 1,25 m wide and approx. 50 kg Unidirectionnal and biaxal fabrics can be cut in tape, consult us. For the references not present on this price list, consult our sales department (1) 100 ml by roll
Page 18
Weight (g / sq.m ) 50 48 86 106 125 160 206 202 202 162 202 300 400 100 205 500 61 115 171 220 285 300 95 193 193 193 193 285 285 170 158
Weave
Larg. (cm) 50 96,5 105 110 80 82 80 80 130 100 120 100 100 100 100 100 120 100 120 120 120 100 100 100 100 127 127 120 120 120 125
Felt plain plain plain plain plain plain plain plain Twill 2/2 Twill 2/2 Twill 2/2 Twill 2/2 plain plain plain plain plain plain plain plain plain plain plain Twill 2/2 plain Twill 2/2 plain Twill 2/2 plain plain
Woven fabrics
Glass
Aramid
Carbon
C 95 (Yarn 1 K) C 450 (Yarn 3 K) C 450S(Yarn 3 K) C 450 (Yarn 12 K) powedered 1 face C 450 S (Yarn 12 K) powedered 1 face C 430 (Yarn 3 K) C 430 S (Yarn 3 K) KC 639 Diolen 14 K
Peel ply see page 22-23 Weight References (g / m2) 270 400 500 400 500 plain plain plain plain plain Weave width (cm) 100 100 100 127 127
Roving
Nature of filament E Glass R270 R400 R500 RS600 RS800
(*) Prices by roll. Consult us for prices by quantity. Other products available on demand
Page 19
Unidirectionnals
Nature of filament
References
Weight
2 (g / m )
Weave
Width (cm)
Woven E glass 4190 4220 4290 UDV 300 190 220 290 300 UD tape (81/19) UD tape (93/7) UD tape (90/10) UD tape 100 100 100 10 30 5 10 30 60
UDV 600
600
UD tape
UDC-160
160
CX 125
125
Carbon woven
UDC 300
300
UD tape
Carbon woven
UDC 600
600
UD tape
(*) Prices by roll. Consult us for prices by quantity. Other products available on demand.
Page 20
Tubular braid 45
Carbon
Tubular carbon braid 45 diam 15 mm Tubular carbon braid 45 diam 30 mm Tubular carbon braid 45 diam 50 mm
E glass
Tubular glass braid 45 diam 60 mm Tubular glass braid 45 diam 80 mm
Flat braid 30
E glass
Flat glass braid 30 width 50 mm Flat glass braid 30 width 100 mm
Carbon
Flat carbon braid 30 width 50 mm
Tape 0
E glass
Glass UD tape 174 g/sq.m width 15 mm Glass UD tape 174 g/sq.m width 25 mm Glass UD tape 174 g/sq.m width 50 mm Glass UD tape 350 g/sq.m width 15 mm Glass UD tape 350 g/sq.m width 25 mm Glass UD tape 350 g/sq.m width 50 mm
Carbon
Carbon UD tape 174 g/sq.m width 15 mm Carbon UD tape 174 g/sq.m width 25 mm Carbon UD tape 174 g/sq.m width 50 mm Carbon UD tape 350 g/sq.m width 15 mm Carbon UD tape 350 g/sq.m width 25 mm Carbon UD tape 350 g/sq.m width 50 mm
Page 21
Laminate
Nylex
Bleedex
or
Feltrex
Width of the fabric
Perforex
Peeltex
Bleeder
Bleedex High permeability bleeder
(cm) 75
Feltrex 150 Bleeder for thin laminate Feltrex 300 Bleeder for thick laminate
150 g / m 2 300 g / m 2
75 75 90
Release film
Perforex Plastic film micro-perforated Limits the resin flow, ease the peeling of vacuum consumables
Peel ply
Peeltex Peelply with green and blue stripes. Tear resistant peel ply Temperature resistance: 130C 2,5 5 10 15 20 30 80 160 15 20 30 80 127 2,5 5 10 15 20 30 80 100 127 160 90 200 300 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Sold by linear meter 100 100
Vacuum film
Tubular PE bag Nylex 50m nylon vacuum film Temperature resistance: 150C Nylex 75m nylon vacuum film Temperature resistance: 150C
Vacuum tape
Sealtex Tacky tape By box of 22 rolls Temperature resistance over 80C 13 m 22 x 13 m
Page 22
Laminate
Mould
Sealtex Vacuum
Infusion ramp
Drainage net
Drainage net
Resipass
(cm) 305 90
100
Vacuum film
Tubular PE bag by linear meter Nylex 50m nylon vacuum film Temperature resistance: 150C Nylex 75m nylon vacuum film Temperature resistance: 150C 200 100
Release film
Perforex Plastic film micro-perforated Limit the resin flow, ease the peeling of vacuum consumables 90
Peel ply
Peeltex Peelply with green and blue stripes. Tear resistant peel ply Temperature resistance: 130C 2,5 5 10 15 20 30 80 160 15 20 30 80 127 2,5 5 10 15 20 30 80 100 127 160 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 13 m 22 x 13 m
Vacuum tape
Sealtex Tacky tape Temperature resistance over 80C. By box of 22 rolls
Microperforated PVC foams dedicated to vaccum processes see page 39 Omega profiles " infusion grade"- consult us
Page 23
Quick Connexion 3/8 Int .Diam. 10 mm For the pipes ID 8mm - OD 10mm
PE Pipe diam. 8-10 mm in 25 ml. PE Pipe diam. 10-12 mm in 25 ml. PE Pipe diam. 12-15 mm in 25 ml.
Spiral PE pipe Diam 10-12 mm in 20 ml Permit the resin to transfer under the vacuum bag. Vacuum gage 1/4" - 1200 to 0,0 mbar
Page 24
Release agents
Kg 2,85
Cirex PV6 Sprayable sealer for one off release, create a surface film. Ideal to seal a pattern made from porous material (Wood, plaster, medium) Cirex Si 111 Thixotropic paste release agent Ideal for technical flanges on RTM toolings or porous substrates
1 5
0,8 4
Cirex Si 112 5 Versatile yellow wax, use till 50C. Avoid "fish eyes" for moulding without gelcoat. Cirex FK 1000P 0,4 Wax for high temperature application, epoxy, polyester, vinylester resins till 200C High gloss. Cirex Si 022 Sealer for semi-permanent release agent. Avoid build up in mould Cirex Si 023 Concentred sealer for semi-permanent release agent. Avoid build up in mould. Godd resistance when walking in the mould. Bouche-Pores W1 Warerbased sealer for Si 041 WB Cirex Si 040 WB Waterbased release agent for epoxy, polyester and vinylester resins till 250 C. Avoid fish eyes and -release. Compatible with sealer Si 022 and Si 023. Cirex Si 041 WB Universal water based release agent for all kind of polymers till 420C. Compatible with sealer Bouche-Pores W1. Cirex Si 042 Semi-permanent release agent for epoxy, polyester and vinylester. High gloss. Release till 390C. Very efficient on all type of substrates Compatible with sealer Si 022 and Si 023. 1 5
0,426
0,84 4,2
1 5
1 5
0,84 4,2
1 5
0,84 4,2
1 5
0,84 4,2
4,25
Cirex Si 043 5 Concentred semi-permanent realease agent for epoxy, polyester, vinylester and phenolic resin. sliding effect, excellent for mould with a big draw and low taper. Very efficient on metallic mould.Service temperature till 400C Compatible with sealer Si 022 and Si 023. Cirex Si 60 White viscous semi-permanent release agent for epoxy, polyester and vinylester till 180C. Compatible with Cirex Si 023, avoid fish eyes and pre-release Can be use on wax. 1 5
3,75
0,8 4
Page 25
Kg
Cirex Si 65 N Semi-permanent release agent for epoxy, polyester and vinylester resin. till 180C. Easy to polish. Compatible with Cirex Si 023, avoid fish eyes and pre-release Cirex Si 66 Semi-permanent release agent for epoxy, polyester and vinylester resin. till 180C. Easy to polish. Compatible with Cirex Si 023, avoid fish eyes and pre-release Cirex Si 68 Permits the release of solvented product (Epoxy & Polyurethanne paints). Liquid, use till 120C Compatible with Cirex Si 023 and traditional wax. Cirex DE 73 Water based release agent, ideal for filament winding. Release of epoxy, polyester and phenolic, till 200C
4,05
1 5
0,78 3,9
5 20
5 20
8 Cirex Si 019 5 Mould cleaner, use before application 20 16 of new release agent, do not damaged the gelcoat NOTA : The sealer/release agents are sprayable, but requirea light polish with a cloth if a glossy finish is required. Average consumption by spray : 10 to 15 ml / sq.m / coat Cirex Si 022 and SI 023 permits to optimize the semi permanent effect of the release agent describe previously.
Page 26
200 / 120 / 180 200 120 180 100 (*) Consult us for prices by quantity, "Infusion grade" (35kg/cubic.m) E220 - Consult us The list above is corresponding to the most used profils in the composites field. Do not hesitate to contact our technical department for dimensions adapted to your requirements. These polyethylene extruded profils are compatible with polyester and epoxy resins.
To xx-xxx mm Omga
567 g / sq.m at 0
ETHAFOAM E220
White extruded polyethylene foam 35kg/cubic meter Sheets (dimensions in mm: L x l x h) EthaFoam sheet 30 mm 2750 x 600 x 30 EthaFoam sheet 50 mm 2750 x 600 x 50 EthaFoam sheet 60 mm 2750 x 600 x 60 EthaFoam sheet 80 mm 2750 x 600 x 80 EthaFoam sheet 100 mm 2750 x 600 x 100 49.5 82.5 99 132.0 165.0
Page 27
Fillers
Whitecell Hollow Microspheres of thermoplastic copolymer fo White powder
Weight in Kg 0,02 0,11 0,6 5 0,07 0,43 2,2 0,14 0,8 4,1 40
Pack of liter(s) 1 5 30 160 1 5 30 1 5 30 250 1 5 30 200 1 5 30 50 1 5 30 150 1 5 30 150 1 5 30 110 1 5 30 220 1 5 30 env. 40 220
Glasscell 10 Hollow Microspheres of glass, low density 100 g/l White powder Glasscell 25 Hollow Microspheres of glass, low density 250 g/l Excellent mechanical properties.White powder
Phenolic microballoons Hollow Phenolic Microspheres, low density and eas Brownish red
0,7 3,6 12 0,46 2,5 13 20 0,05 0,3 1,7 10 0,05 0,28 1,5 10 0,15 0,9 4,9 20 0,12 0,42 4 24 0,34 1,25 6 12,5 50 0,28 1,6 9 0,18 1 6 25 g 500 g
Fillite Hollow Aluminium silicate Microspheres for coarse Excellent mechanical properties Brownish grey powder Silicell Fumed collodale silica. Thixotropic agent (anti-sag Do not work with polyurethanne White powder Silicell H2 Hydrophobic colldale silica.Thixotropic agent (antiWhite powder
Treecell Pure cellulose microfibers for wood bonding White cotton texture powder
Mix' Fill 10 3 component finishing light weight filler, for thin sec Grey powder
Mix' Fill 30 3 component light weight filler, for deep defects fillin Beige powder
Wood Fill 250 Polyvalent formulated filler for high density fillet-join wood bonding. Wooden colour Wood Fill 130 Formulated filler for low density fillet-joints White powder "Mahogany" powder Pigment for fillet-joints
30 1 5 30
Page 28
Fillers
Fill' Tool 400 Abrasion resistant formulated filler for tooling gelcoa Grey-blue colour Fill'Cast 21 Formulated filler for mould making by casting Thermal conductivity close to aluminium Aluminium powder Particle size below 60 microns Aluminium granules Granule size from 200 to 1000 microns
Weight in Kg 1 5 5 25
Pack of liter(s) 1 5 5 30
1 5 1 5 25 50 25
1 5 1 5 30
Granule size from 1000 to 3150 microns Micronized lead powder For high density casting and filling. D>5 Graphite powder Anticorrosion and sliding properties
0,33 2
1 5
(g)
Whitecell Glasscell 10 Phnoliques Glasscell 25 Fillite Mix Fill 30 Mix Fill 10 Wood Fill 250 Wood Fill 130 Treecell Silicell Fill' tool Fill' tool Alu Poudre de graphite Alu granules 200-1000 36 104 140 350 310 100 250 130 80 50 930 415 1160
(ml)
120 - 190 60 - 320 30 - 200 85 - 320 130 - 320 240 - 300 80 - 320 150 - 380 40 - 210 60 - 180 90 - 210 50 - 170 90 - 220
qty of fillers max. (g/l) 370 500 600 730 600 660 1 080 770 1 150 1 170 1 800 1 630 1 360 1 720
Theses quantities are based on a resin having a viscosity of 800 Cps @ 20C.
Page 29
Tap Flo-King (brown 2 inches) for 200 L drum Tap (White 3/4 inch)for 30 L jerrycan and 200 L dru
piece piece
Mini-pumps for volume mixing ratio* Mixing ratio : 1/1, 2/1, 3/1.
100
Scissors for cutting glass, carbon, aramid Small 8' Big 10'
piece piece
Brushes 30 mm Brushes 50 mm
10 10
Unit
10
Aluminium roller, plastic handle Diam 15 x Width 70 Aluminium roller, plastic handle Diam 15 x Width 14
piece piece
Roller for Deck Line Roller in foam diam. 75 mm long. 175 mm Handle for 75mm diam. roller in foam Roller in foam diam. 35 mm long. 115 mm Handle for 35mm diam. roller in foam Cleaning paper 2 layers 350 lm
* Mini-pumps for volume mixing ratio can be used with theSR 5550 for kits of 3.9 Kg to 14.5 Kg mix SR 8450 for kits of 4.35 Kg to 14.7 Kg mix SR 1610 for kits of 40 to 80 liters of fillers Glass One & Surf Clear for kits of 5 Kg mix
Page 30
Electric Scissors
piece
(remise -20 % par 5 kits ) Ce kit est compos de : -1 ciseau lectrique ergonomique, au look "carbone", -1 jeu de lames standard, -1 jeu de lames sabot, -1 connecteur/cordon pour utilisation sur secteur, -1 batterie, -1 chargeur 220 volts et son socle. Permet de couper tous les tissus techniques, avec facilit, rapidit, et confort. Soit sur secteur, soit sur batterie (autonomie env. 4h00) -Pices dtaches: piece -Jeu de lames de rechange (version sans sa -Batterie de rechange piece
Balances OHAUS
Precision electronic balance OHAUS Balance OHAUS CS200 Capacity 2 Kg, readability 1 g Economical balance for usual weighting. Different units g, oz, lb Working on battery (included) or AC adapter (included) With Stainless steel pan. piece
Balance OHAUS SCOUT2 6000 Capacity 6 Kg, readability 1 g. Balance for worshop or laboratory. Different units g, oz, lb. Working on battery (not included) or AC adapter (included)
piece
Per 10
Page 31
All Accessories will work with this machine. We are currently in development for a High Output Large machine with an app. feed rate: 5 Options : Timer Unit (ATM), Agitator (AAG), Mixing Adapter (AAM), Heater (AHT), Control
OPTION :
ATM The timer ATM can be added to all X-Series Machines and allows to set specific weight prog
This way it is possible to set 10 different weight quantities to be dispensed at the push of a button. This allows more control of the final exact output and needs less attention from the workers.
This allows more control of the final exact output and needs less attention from the Fit to Machines : All X-Series
AAG For RMX For RLX
It can be set with a timer at specific times. It then stirs the liquid automatically. Fit to Machines All X-Series
AHT
This heater can be added to all Machines. It is necessary if the working area is below 20 C or with special resins. A moderate temperature heating belt to maintain the resin at an
appropriate viscosity to not damage the pumping system nor alter the correct resin: hardener ratio under extreme conditions.
The Control Panel can be added to all X-Series Machines and allows the machine to be controlled from another room or through walls. This is ideal for factories that want to strictly separate the material from the production. Fit to Machines All X-Series AMM The Mixing Adaptor can be used with all Machines and allows the resin and hardener dispensed with the correct ratio to be mixed at the same time. It is working with disposable static plastic mixers. ARE These allow the Resin and Hardener to be pumped into the machines as effortless and clean as possible. They work with any drum size. The stand allows easy access to the drum to change it. Feed rate 5-10 sec / 100 gr mixed Fit to Machines All A-Series and all X-Series
Pices dtaches : Kit pignon chane Pignons pour machines mixer Manivelle pour machine mixer RMA Pompe 8cc pour machine mixer
Page 32
1 Kg
Box of 100
Box of 100
Box of 100
Overall
Size XL by box of 25 Units
Piece
Soft coating
Slatex
Two component polyurethanne elastomer, self levelling and degassing. Its excellent resistance to load, permit to use it on its own as a confortable coating. Low viscosity, excellent chemical resistance to hydrocarbons and water. Excellent abrasion and compression resistance.
Page 33
End grain balsa panel Service temperature up to 150C High mechanical properties
(inch) 3/16 1/4 3/8 7/16 1/2 5/8 11/16 3/4 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 3/4 3 Thickness (mm) 4,8 6,4 9,5 11,1 12,7 15,9 17,5 19,1 25,4 31,8 38,1 44,5 50,8 57,2 63,5 69,9 76,2 sq.m / box 49,12 37,95 24,56 21,58 18,61 14,88 13,40 12,65 9,67 7,44 5,95 5,21 4,47 3,72 2,98 2,98 2,98 Panels / box 66 51 33 29 25 20 18 17 13 10 8 7 6 5 4 4 4
SB 100 CK 151 Kg / m
3
SB 100
* * * *
** ** ** ** ** ** ** ** ** ** ** ** ** ** **
* *
61 (+/- 0,75 mm) x 122 (+/- 3 mm) cm, thickness +/- 1,5 mm. 0,744 m
(*) By complete box
BALTEK SB.100
Rigid and sanded panels
BALTEK SB.100CK
Sanded sheets, crossed cuttings on the whole thickness , back up with a fabric
BALTEK SB.100GPS
Sanded sheets. Perforations (diameter 2mm, 50 mm distance) and cuttings (0.7 mm wide, 2.5 mm deep).
Surface treatment by coating of resin ( AL600) to decrease the porosity and increase the bonding
P GP
Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mm * wide, 2.5 mm deep and distance 20 mm on both sides Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mm * wide, 2.5 mm deep * High precision of cutting +/- 0,25 mm
GPS
Fillet Strips
Tapered flexible strips
Reference Density Length Thickness
(pouce) 3/8" 1/2" 5/8" 11/16" 3/4" 1" 1 1/4" 1 1/2" (mm) 9,52 12,7 15,9 17,5 19,05 25,4 31,8 38,1
BALTEK FILLET STRIPS Tapered flexible strips for fast chamfer making
FILLET STRIPS
3 151 kg / m (Density 102 to 176 Kg / m3) 61 cm
Profil / box
Page 34
End grain balsa panel Service temperature up to 150C High mechanical properties
SB 50
77 to 116 Kg /m3
SB 150
216 to 280 Kg /m3
panels (inch) (mm) / box 3/16 4,8 66 1/4 6,4 51 3/8 9,5 33 7/16 11,1 29 1/2 12,7 25 5/8 15,9 20 11/16 17,5 18 3/4 19,1 17 1 25,4 13 1 1/4 31,8 10 1 1/2 38,1 8 1 3/4 44,5 7 2 50,8 6 2 1/4 57,2 5 2 1/2 63,5 4 2 3/4 69,9 4 3 76,2 4 Panel sizes: 61 (+/- 0,75 mm) x 122 (+/- 3 mm) cm, thickness +/- 1,5 mm. Panel surface: 0,744 m Possible options on balsa products Surface treatment by coating of resin ( AL600) AL
BALTEK CK Sanded sheets, crossed cuttings on the whole thickness , back up with a fabric BALTEK SB...GPS Sanded sheets. Perforations (diameter 2mm, 50 mm distance) and cuttings (0.7 mm wide, 2.5 mm deep).
* * * * * *
(*) By complete box
CK P GP
to decrease the porosity and increase the bonding Contour Perforation (2mm diameter, 50 mm distance) Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mm wide, 2.5 mm deep and distance 20 mm on both sides Perforation (2mm diameter, 50 mm distance) and crossed cuttings of 0.7 mm wide, 2.5 mm deep High precision of cutting +/- 0,25 m
GPS T
Page 35
C51.60
Industrial processing foam A closed-cell, polymer foam designed to meet the demanding requirements of highvolume industrial sandwich part production. The unique functional surfaces based on thermoplastic bonded polyester fibres reduce resin consumption while its perforation ensures a good adhesion to the laminate. The foam has a high elongation at break and shows good impact and fatigue properties. it can be formed at room temperature to simple shapes as well as thermoformed to 3-dimensional parts. The elevated temperature resistance allows short processing cycles with (GMT) making it very suitable for mass-produced light-weight sandwich structures subjected to both stactic and dynamic loads in service.
KAPEX C 51.60 Closed cells PU foam Temperature resistance up to 140C Easely formable Imputrescible Usable with prepregs Thermal insulation High fatigue resistance
Thickness
10 mm 15 mm (1) 20 mm
25 16 12
100 65 50
(1) On special order and with minimal quantity of 1000 sq.m by reference
HEREX C 71 ET
Crosslinked PVC foam - High temperature processes
Reference Density Thickness
tolerance ep. (+/-0,5 mm)
Dimensions in mm Tolerance Larg.+/- 10mm Long .+/- 10mm
HEREX C 71 ET Rigid closed cells PVC foam Imputrescible Self extinguishing Service temperature up to 120C Excellent thermal insulator
3 mm 4 mm 5 mm 8 mm 10 mm 12 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm 60 mm 70 mm
Blank (2) 75 mm Blank (2) 78 mm
Panels / box 50 50 50 30 25 20 16 12 10 8 6 5 4 3 3 3
1200 x 1120
(1) Tolerance of thickness on the blank (+0,8/-0,2 mm) (2) Tolerance of thickness on the blank +/- 2 mm
2400 x 1120
2150 x 1005 mm
Page 36
AIREX R 63
Linear PVC
References Density Thickness in mm tolerance (+/- 0,5 mm) 3 (1) 2900 x 1300 5 8 10 12 15 20 25 30 35 40 50 25 25 25 20 17 3000 x 1350 13 10 8 7 6 5 Panel per box
R 63.50
60 Kg /m Standard Dimensions in mm Tolerance Larg.+/- 10mm Leng .+/- 10mm
3
*
Panel per box Standard Dimensions in mm Tolerance Larg.+/- 10mm Leng .+/- 10mm
R 63.80
90 Kg /m
3
R 63.140 *
Contoured Dimensions in mm Tolerance Larg.+/- 5mm Leng .+/- 5mm Panel per box 140 Kg /m3 Standard Dimensions in mm Tolerance Larg.+/- 10mm Leng .+/- 10mm
3100 x 1400
6 5
(1) : Tolerance of thickness for the 3 mm + 0,8 / -0,2 mm * R 63.50 & R63.140 : Available on order only Perforations : Fee of HT / sq.m (Diameter 3 mm spaced out by 5 cms) The following products are obtained by bonding and are not thermoformable, tolerance on thickness +/- 1 mm : R 63.80 in 40 and 50 mm R 63.140 in 25, 30 and 40 mm Smaller tolerance on thickness + 0,2 / -0,4 mm price standard or contoured version + 0,1 / -0,2 mm price standard or contoured version
Page 37
AIREX C 70
Crosslink PVC
References Colour Density (Kg / m3)
Dim.(mm) of sheet for thickness till 8mm Tolerance on larg. & leng. Surface Dim. (mm)of sheet for thickness over 8mm Tolerance on larg. & leng. Surface Dimensions (mm) of grid pattern sheet Tolerance on larg. & leng. Surface
Rigid close cell PVC foam Negligeable wate absorbtion. Excellent thermal insulator
C 70.40
Blue 40 1425 x 1330 +/- 10 mm 2 1,895 m 2850 x 1330 +/- 10 mm 3,791 1200 x 690 +/- 5 mm 2 0,828 m
C 70.48
Light green 48 1365 x 1270 +/- 10 mm 2 1,74 m
2730 x 1270
C 70.55
Yellow 60 1225 x 1150 +/- 10 mm 1.41 m2
2450 x 1150
C 70.75
Green 80
1500x1080 or 2180x1020
C 70.90
Brownish red 100 2050 x 950 +/- 10 mm 2 1,948 m 2050 x 950 +/- 10 mm 2 1,948 m 930 x 510 +/- 5 mm 2 0,474 m
C 70.130
Petrol blue 130 1900 x 850 +/- 10 mm 2 1,615 m 1900 x 850 +/- 10 mm 2 1,615 m
C 70.200
Beige 200 1600 x 750 +/- 10 mm 2 1,200 m 1600 x 750 +/- 10 mm 2 1,200 m
C 70.250
Green 250 1500 x 700 +/- 10 mm 2 1,050 m 1500 x 700 +/- 10 mm 2 1,050 m
+/- 10 mm
1,62 or 2,22 m
2
1500x1080 or 2180x1020
Thickness
tolerance (+/-0,5 mm)
Number of sheet per box Standard Grid pattern Standard Standard Grid pattern Grid pattern Standard Standard Grid pattern Standard Grid pattern Standard Standard Standard
3 mm (1) 4 mm 5 mm 6 mm 8 mm 10 mm 12 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm 60 mm 70 mm 80 mm BLANKS
tolerance (+/-2 mm)
50 50 50 40 30 25 20 16 12 10 8 6 5 4 3 3
120 75 60 50 40 30 24 20
(2) (2)
84 mm 3 4 5
80 mm
78 mm
72 mm
68 mm
58 mm
48 mm
47 mm
Grid pattern = Sheet made of 30 x 30 mm square, bonded onto a glass fabric, exist with smaller square of 15 x 15 mm (Net price + 13%) For other thicknesses or dimensions, consult us. Smaller tolerance on thickness + 0,2 / -0,4 mm prix version standard ou damier
+ 0,1 / -0,2 mm prix version standard ou damier
Page 38
MICROPERF / INFUSION / VACCUM Microperforated cross linked PVC foam, High infusion performances, Ease of vaccum application, improves degassing on hot and cold processes, Reduces print through, increases shear strength and compression mechanical properties.
Reference Density
Thickness
10 mm 15 mm 20 mm 25 mm
For other thicknesses and densities, consult us. MICROPERFORATION can be provided for all ALCAN/AIREX core materials
Page 39
AIREX T 90
Easy processing structural foam
Mousse thermoplastique cellules fermes.
References Density
T 90.100 (1)
110 Kg /m3 Standard Panels per box 100 64 48 42 32 24 20 16 32 24 12 Dim. in mm Panels per box 72 44 36 28 24 16 12 8 32 24
T 90.150 (1)
150 Kg /m3 Standard Dim. in mm
1220 x 610
(1)
1220 x 610
Closed-cell, thermoplastic structural foam designed for use with all resin systems and processing technologies. T90s production process creates a structural core with extremely consistent properties. It is easy to ma-chine and thermoform and suitable for a wide range of structural com-posites applications due to advantageous properties especially com-pression strength and modulus. Outstanding high temperature stability and excellent fire resistance make T90 highly suitable where high FSt-requirements are needed. The foam is chemically stable, UVresistant and does not absorb water. It is thermally stable during high temperature processing and post curing, with not after expansion. Superior FST - Properties (FAR25.853; NF16.101; DIN5510)
12
(1)
(1) Exist in SCRIM version
AIREX T 92
Easy processing structural foam
Closed-cell, thermoplastic structural foam designed for use with all resin systems and processing technologies. AIREX T92s production process creates a structural core with extremely consistent properties. The greatly improved shear elongation / damage tolerance make T92 suitable for the majority of structural composite applications. The foam is easily machined and thermoformed, very thermally stable. This allows the use with many different prepreg systems and in a number of elevated temperature applications. It is highly resistant to chemicals, does not absorb water and has no after expansion.
References Density
T 92.100 (1)
105 Kg /m Standard Panels per box 100 64 48 42 32 24 20 16 32 24 12 Dim. in mm
3
T 92.110 (1)
115 Kg /m Standard Panels per box 72 44 36 28 24 16 12 8 32 24 Dim. in mm
3
T 92.130 (1)
135 Kg /m3 Standard Panels per box 40 24 20 16 12 12 8 8 32 24 Dim. in mm
1220 x 610
1220 x 610
(1)
12
(1)
(1) Exist in SCRIM version
1220 x 610
12
(1)
Tolerances :
Page 40
AIREX R 82
Fire resistant (M1 F1) High performance thermoplastic foam
AIREX R 82 Thermoplastic foam Resiliente Imputrescible Thermoformable Closed cells Low water absorption Excellente dielectric properties Usable from -194C to + 180C Fire resistance: Aviation FAR 25 Train M1 F1, S4 - SR2 - ST2
AIREX R 82.80 80 Kg/cubic.m
2700 x 1200
3,78 m2
3,24 m2
20 15 12 10 8 6 4 4 3 3 2 2
Net prices for one panel, for bigger quantities, consult us.
Tolerance of thickness :
For the 3 mm + 0.8 / - 0,2 mm Other thickness +/- 0,5 mm Tolerances length : + / - 10 mm Tolerances width : + / - 10 mm
Page 41
SALE CONDITIONS
Applications : Apart from contrary convention written by us, the offers, markets or orders are ruled without exception by the selling conditions hereunder, that are applicable despite the documents coming from our customers. Orders : The orders placed by our customers are engaging us only if they are subject to a written acceptance from us. Prices :Our price list do not constitute an definitive offer. It can beNet price of the kit always invoiced with the current price list at delivery time. Our prices are net and ex-works. Payments : The customers not having an account registred in our data will have to pay before expedition. For the customers having an account, payments will be done 30 days from date of invoice, apart from an agreement written by us. All amount not payed before the due date will involve the payment of a delay penalty of 2% per month. This penalty will not need any preliminary formal demand. The non payment before the due date will involve the due of the complete amount still due and the suspension of the deliveries.
Deliveries : We deliver usually on stock without delay obligation. The expeditions, even carriage paid, travel at customer's risk, that should verify the goods when delivered. In case of damage or loss happened during the transport, it is incumbent on the consignee to exert all the appeal against the transport companies, according to articles 105 and 106 of the Commercial Law. The claims concerning the quality and the quantity of the goods should be done within the three days after delivery. We do not send samples for trials and do not accept the return of the goods apart from mistake from us or preliminary agreement. We are not responsable for damages or accidents that can be caused by the products we sell or their use. Taking back : Apart from delivery mistake from us, will not be accepted: the products delivered since since more than 30 days, the products opened or cut, the specific orders (colours, dimensions,). A systematic loss in value of the products will be done and credit cost will be invoiced. The cost of transport for the return of the goods will be chargeable to the customer. Warranty : The warranty we give against manufacturing defects involves only the replacement of products recognized as defective. We reserve the right to modify our products in terms of supplying, packaging or price. This without obligation for us to modify evenly the products ordered previously. Retention of title clause: SICOMIN reserves the property of the goods delivered till complete receipt of the amount due (including the acessories). Nevertheless, the risks happening after expedition are chargeable to the buyer. It will be possible for him to use these goods in the context of normal implementation in its factory. This authorization is taken out from him with a full right, when the first incident of payment occures, without preliminary formal demand. Therefore, SICOMIN will be able to claim the goods still being in possession by the purchaser, until the payment will be completely acheived, even in case of collective proceedings or temporary suspension of proceedings. All amount paid in advance stays acquired by way of indemnity. The purchaser commit himself to make arrangements to let the goods individualized as SICOMIN's property Applicable right:In case of lawsuit, the french law is applicable and the commercial tribunal of Aix-en-Provence is the only one competent however the means of payment, the delivery conditions, even in case of call up warranty or severalty of the defendants. This reserve will not allows the customer to cancel its order, this possibility being reserved to the seller. The orders are accepted exclusively under the above conditions, in case of variations made by the customer, to the initial stipulations, our company is considered involved only in case of a new formal agreement on behalf of us
All general or particular disposition appearing on commercial or accountant documents of the customer that would be contrary to the present general sale terms are reputable null and non written.