Escolar Documentos
Profissional Documentos
Cultura Documentos
Semaphore Indicator
SPS-TYPE
Rated insulation voltage(Ui) Rated operational voltage (Ui) Voltage fluctuation range
2,000 V AC/min. 4,500 V, 3 times for each pole (1.2/50 s) 490m/s2 6 directions 3 times Over 10 thousand cycles IP52 20 to 60C 30 to 75C 45 to 85% Max 2,000 m AWG20 to14 M3.5 x 8 with square washer 1 to 6 mm Approximately 30 g
* Please refer to page 6 for the rating compliant with the international standard.
FEATURES
Standard terminal cover for the live parts ensures a higher level of safety.
Customer requirements for size and weight reductions are completely satisfied by the equipments compact design.
97 mm (screw type: 100)
Option for a round or square external shape is available. Distinct display of each optional shape completes the sophisticated panel design.
85 mm
SPSR-3 About 30 g
Visual-apparent circuit display makes it possible to verify the circuit connection accurately and instantly. A superior energy-efficient design has achieved further reductions of power consumption to one fourth the previous model.
Note: Rated operationl current/24VDC (Previous model) SPR/L model: Approx. 37 mA (New model) SPSR/L model: Approx. 9 mA
(Conceptual drawing)
Semaphore Indicator
SPS-TYPE
STANDARD PRODUCTS
Mounting panel t=1~6 Packing Type:NP M 3.5 x 8 screw (Up to 2.5mm2 wiring)
Nut TOP 4 25 19
+0.5 -0
Applicable accessories
Terminal cover
30
CXL-CV SPS-Q
Tightening tool
Mounting panel t=1~6 Packing Type:NP M 3.5 x 8 screw (Up to 2.5mm2 wiring)
Nut TOP 6
32
26
40
20.5 -0
+0.5
Applicable accessories
Terminal cover Tightening tool
40
CXL-CV SPS-Q
STANDARD PRODUCTS
Mounting pane t=1~6 Packing Type:NP M 3.5 x 8 screw (Up to 2.5mm2 wiring)
Nut
TOP 4
19
28 (80) 7 (85)
+0.5
30
28
20.5 -0
Applicable accessories
Terminal cover
30
CXL-CV SPS-Q
Tightening tool
Mounting panel t=1~6 Packing Type:NP M 3.5 x 8 screw (Up to 2.5mm2 wiring)
Nut TOP
26
35 9.5
35
(80) (85)
40
20.5 -0
+0.5
Applicable accessories
Terminal cover Tightening tool
40
CXL-CV SPS-Q
Semaphore Indicator
SPS-TYPE
ORDERING METHOD
Refer to the following type code.
Product coding
SPSR-20S-DC110-BBA
Basic type Terminal
Code S Type Terminal screw
Mounting hole
Code No Code A Mounting hole dimention 20.5mm 22.3mm
Surface dimensions
Code R L Dimensions Round type Square type
DC125 DC220
Frame color
Code B Color Black(N1.5)
Surface dimensions
Code 2 3 Face size Indicating flag width 25mm 28mm 32mm 35mm 4mm 6mm
Indicating flag
Code 0 1 2 OFF ON No voltage
Flag color
Code B Color Black(N1.5)
ACCESSORIES
Terminal cover
CXL-CV
Tightening tool
SPS-Q
Indication diagram
OFF
DC (P) DC (P)
Circuit diagram
ON
DC (P)
No voltage
DC (P)
2 R SD SD R Coil R 3
Semaphore
Off
On
Coil
(N)
(N)
(N)
(N)
1 2 3 4
Rated operational voltages Rated operational currents Rated insulation voltage IP code
1 2 3
Ambient air temperature Altitude Atomspheric conditions Conditions during transport and storage Mounting hole Rangr of panel thickness Minimum mounting pitch SPSR/L-2 SPSR/L-3
5C~+40C 2,000m max. Humidity : max 90% at +20C, 50% at +40C Micro-environment : Pollution degree 3 Between 25C and +55C, for short periods not exceeding 24h, up to +70C see 3-4page 1~6mm 30mm 40mm
4 5 6 7
1 2 3
Stranded wire : AWG20(max 2pear) With ring lug : AWG14-20(max 2pear) Power frequency withstand voltage : AC2000V/1minute Mechanical durability : 100,000times
Note: The above items have been certified according to TV. Please contact us for more details.
Nishiiru, Tominokoji, Oike-dori, Nakagyo-ku, Kyoto 604-0954, Japan 3-4-1, Nomura, Kusatsu, Shiga 525-8521, Japan Phone 81-77-562-1215 / Fax 81-77-562-1213 (Shin-Asahi Factory) 905-1, Ota Oaza Shin-Asahi-cho, Takashima-gun, Shiga 520-1512, Japan Phone 81-740-25-6338 / Fax 81-740-25-6339
URL: E-mail:
http://www.fujidk.co.jp/ prod@fujidk.co.jp
Precautions
Be sure to use the product within the correct voltage and amperage ranges as stated in this manual. Check connections carefully, as a faulty connection may lead to an accident. Check for abnomalities such as breaks in the leads, etc. before using the product. Avoid using the product in extreme environments such as in the presence of high temperatues. high humidity, dust, corrosive gases, vibration, or shocks. Please contact the manufacturer for advice before using the products for special applications. When overheating or other preblems occurs, disconnect the power to prevent the voltage from being applied. Be sure to use compatible parts or tools during wire connection.
To facilitate technical improverments, we reserve the right to change the specifications and names of products without notice. The contents described herein are correct as of June, 2004.
NPSPS0406-30