Escolar Documentos
Profissional Documentos
Cultura Documentos
ELECTRICAL APPARATUS
NEC 500 Class I, Division 1, Groups A, B, C, D, T6
NON-ELECTRICAL EQUIPMENT
marking according to ATEX
CENELEC
II 2 G
ck IIC T6
TYPES OF PROTECTION FOR NON-ELECTRICAL EQUIPMENT IN AREAS WITH COMBUSTIBLE DUST AND IN HAZARDOUS AREAS
Type of protection constructional safety c Diagram Main application
couplings, pumps, gear drives, chain drives, belt drives
Sufcent safety by means of 2 protective measures / 2 faults the equipment is intended to be deenergized in the event of an explosive atmosphere
Standard
EN 13 463-5
ameproof enclosures
Category Category 1
Sufcent safety by means of 2 protective measures / 2 faults frequently occuring equipment faults / 1 fault during normal operation
ameproof enclosures
brakes, couplings
EN 13 463-3
pressurized enclosures
switchgear and control cabinets, analysers, large motors px = for use in Zone 1, 2 py = for use in Zone 1, 2 pz = for use in Zone 2
Category 2 Category 3
pressurisation pumps
pumps
EN 13 463-7
Category (1), (2), (3) = associated electrical apparatus installation in the safe area
intrinsic safety
instrumentation technology, eldbus technology, sensors, actuators ia = for use in Zone 0, 1, 2 ib = for use in Zone 1, 2 [Ex ib] = associated electrical apparatus installation in the safe area intrinsically safe systems
UL 60 079-11 FM 3610
EN 13 463-6
ZONES
Group A B C D Dangerous explosive atmosphere continously or longterm or frequently likely to/can exist under normal operating conditions not likely to occur or for short period Gas acc. CENELEC/ IEC/NEC 505 Zone 0 Dust acc. IEC/ CENELEC Zone 20
liquid immersion
EN 13 463- 8
eldbus intrinsically-safe concept (FISCO) for Zone 1 eldbus non-incentive concept (FNICO) for Zone 2 transformers, starting resistors
ow restricting enclosure
fr
EN 13 463-2
oil immersion
Zone 1
Zone 21
UL 60 079- 5 FM 3600
Class II (dust)
Zone 2
Zone 22
encapsulation
switchgear with small capacity, control and signalling units, display units, sensors ma = for use in Zone 0, 1, 2 mb = for use in Zone 1, 2
UL 60 079-18 FM 3600
Fibers
type of protection
n_
all electrical apparatus for Zone 2 nA = non-sparking apparatus nC = sparking apparatus, in which the contacts are protected in a suitable way nL = energy limited apparatus nR = restricted breathing enclosures nZ = apparatus with n-pressurization
Division 1 Division 2
optical radiation
op _
op is = inherently safe optical radiation op pr = protected optical radiation op sh = optical radiation interlock
Standard
EN 61 241-1 IEC 61 241-1
R. STAHL is one of the globally leading suppliers of explosion protected apparatus and systems like:
pressurization
pD
EN 61 241- 4
IEC 61 241- 4
intrinsic safety
iD
measurement and control technology, eldbus technology, sensors, actuators iaD = for use in Zone 20, 21, 22 ibD = for use in Zone 21, 22 [Ex ibD] = associated electrical apparatus installation in the safe area
EN 61 241-11
IEC 61 241-11
encapsulation
mD
switchgear with small capacity, control and signalling units, display units, sensors maD = for use in Zone 20, 21, 22 mbD = for use in Zone 21, 22
EN 61 241-18
IEC 61 241-18
100C 85 C
Hamerstraat 10, 7556 MZ Hengelo, the Netherlands Phone + 31 74 2 472 472, Fax + 31 74 2 435 925 Mail: info@ electromach.nl
Instrumentation Switching and Distribution Installation Lighting Operating and Monitoring Signalling and Alarming
www.electromach.com