Você está na página 1de 5

Instrument Transformers Sectional Committee, ET 34 (6324) NATIONAL FOREWORD This Indian Standard which is identical with IEC 60040

(Part 8) : 2002 Instrument Transformers Part 8 Electronic Current Transformers is issued by the International Electrotechnical Commission (IEC) is proposed to be adopted by the Bureau of Indian Standards on the recommendation of the Instrument Transformers Sectional Committee and approval of the Electrotechnical Division Council. The text of the IEC standard is proposed to be approved as suitable for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following: a) Wherever the words `International Standard appear referring to this standard, they should be read as `Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. In this adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standard which is to be substituted in their respective places is listed below along with their degree of equivalence for the editions indicated: International Standard IEC 60044-1 : 1996 Instrument transformers Part 1 : Current transformers IEC 60044-6 : 1992 Instrument Transformers Part 6 : Requirements for protective current transformers for transient performance IEC 60044-7 : 1999 Instrument transformers Part 7 : Electronic voltage transformers IEC 60050-161 : 1990 International Electrotechnical Vocabulary. Chapter 161: Electromagnetic compatibility IEC 60050-604 : 1990 International Electrotechnical Vocabulary. Chapter 604 : Generation, transmission and distribution of electricity Operation IEC 60056 High Voltage alternating current circuit-breakers Corresponding Indian Standard Doc.ETD 34(6106) Instrument transformers. Part 1 Current transformers Doc.ETD 34(6322) Instrument Transformers Part 6 : Requirements for protective current transformers for transient performance Doc.ETD 34(6323) Instrument transformers Part 7 : Electronic voltage transformers IS 1885 (Part 85) : 2003 Electrotechnical Vocabulary - Part 85 : Electromagnetic Compatibility IS 1885 (Part 70) : 1993 Electrotechnidal Vocabulary: Part 70 Generation, transmis sion and distribution of electricity operation IS 13118 : 1991 Specification for High-Voltage Alternating-Current Circuit-Breakers IS 1885 (Part 28) : 1993 Electrotechnical Vocabulary Part 28 : Instrument Transformers (First Revision Degree of Equivalence Identical

Under Preparation

-do-

Identical

-do-

Identical to IEC 60056 : 1987 Identical

IEC 60060-321 : 1986 International Electrotechnical Vocabulary. Chapter 321 : Instrument transformers

IEC 60060-601 : 1985 International Electrotechnical Vocabulary. Chapter 601 : Generation, transmission and distribution of electricity - General IEC 60060-1 : 1989 High-voltage test techniques - Part 1: General definitions and test requirements IEC 60071-1 :1993 Insulation coordination - Part 1: Definitions, principles and rules IEC 60085 : 1984 Thermal evaluation and classification of electrical insulation IEC 60255-5 : 2000 Electrical relays Part 5 : Insulation coordination for measuring relays and protection equipment Requirements and tests IEC 60296 : 1982 Specification for Unused mineral insulating oils for transformers and switchgear

IS 1885 (Part 78) : 1993 Electrotechnical Vocabulary: Part 78 Genereation, transmission and distribution of electricity General IS 2071(Part 1) :1993 High-voltage test techniques - Part 1: General definitions and test requirements (Second Revision) IS 2165(Part 1) :1977 Insulation co-ordination - Part 1: Definitions, principles and rules (Second Revision) IS 1271 : 1985 Thermal evaluation and classification of electrical insulation IS 12083 (Part 2) :1986 Electrical relays: Part 2 Insulation tests

-do-

-do-

Technically Equivalent

Technically Equivalent to IEC 60085 : 1984 Identical

IEC 60376 : 1971 Specification of technical grade sulfur hexafluoride Second supplement clause 26
IEC 60529 Degrees of protection provided by enclosures (IP Code)

IS 1866 : 2000 Code of Practice for Electrical Maintenance and Supervision of Mineral Insulating Oil in Equipment IS 13072: 1991 Sulphur hexafluoride for electrical purposes IS/IEC 60529:2001Classification of Degrees of protection provided by enclosures (IP Code) (Superceding IS IS 12063 : 1987) IS 15382(Part 1) : 2003 Insulation co-ordination for equipment within low-voltage . systems. Part 1 : Principles requirements and test IS 12729 : 2004 Common Specification for High-Voltage Switchgear and Controlgear Standards IS 11731 : (Part 2) : 1986 Methods of Test for Determination of Flammability of Solid Electrical Insulating Materials When Exposed to An Igniting Source Part 2 : Vertical Specimen Method IS 13736(Part 3/Sec 3) : 1993 Classification of environmental conditions: Part 3 Classification of groups of environmental parameters and their severities, Sec 3 Stationary use at weather protected locations

Technically equivalent

Identical to IEC 60376 (1971) Identical

IEC 60664-1 : 1992 Insulation coordination for equipment within lowvoltage systems. Part 1 : Principles requirements and test IEC 60694 Optical fibre cables

Identical

-do-

IEC 60707 : 1999 Flammability of solid non-metallic materials when exposed to flame sources List of test methods

Technically Equivalent to IEC 60707 (1981)

IEC 60721-3-3 : 1994 Classification of environmental conditions - Part 33: Classification of groups of environmental parameters and their severities - Stationary use at weather protected locations

-do-

IS 13736(Part 3/Sec 4) : 1993 Classification of environmental conditions : Part 3 Classification of groups of environmental parameters and their severities, Sec 4 Stationary use at nonweatherprotected locations IEC 60794 (all parts) Optical fibre IS 13882(Part1/Sec 1) : 2001 cables Optical Fibre Cables - Part 1 : General Specification - Section 1 : General IEC 60812 : 1985 Analysis IS 11137 (Part 2) : 1984 Analysis techniques for system reliability - Techniques for System Reliability Procedure for failure mode - Part 2 : Procedures for Failure and effects analysis (FMEA) Mode and Effects (FEMA) and IEC 60721-3-4 : 1995 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations Failure Mode, Effects and Criticality Analysis (FMECA) IEC 60870-5-1 : 1990 Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats IEC 61000-4-2 : Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test IS 12746 (Part 5/Sec 2) : 1998 Telecontrol equipment and systems : Part 5 Transmission protocols, Sec 2 Link transmission procedure

-do-

Identical to IEC 607941-1(1993) Identical to IEC 60812 (2006)

Identical

IS 14700 (Part 4/Sec 2) 2008 Electromagnetic Compatibility (EMC) - Part 4 : Testing and Measurement Techniques, Section 2 : Electrostatic Discharge Immunity Test IS 14700 (Part 4/Sec 3) 2008 Electromagnetic Compatibility (EMC) - Part 4 : Testing and Measurement Techniques, Section 3 :Radiated, Radio frequency, electromagnetic field immunity test IS 14700 (Part 4/Sec 4) 2008 Electromagnetic Compatibility (EMC) - Part 4 : Testing and Measurement Techniques, Section 4 Electrical Fast Transient/Burst Immunity Test IS 14700 (Part 4/Sec 7) : 2008 Electromagnetic compatibility (EMC) : Part 4 Testing and measurement techniques

Technically equivalent

IEC 61000-4-3 : Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test

-do-

IEC 61000-4-4 : Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test IEC 61000-4-7 : 1991 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

-do-

-do-

IEC 61000-4-8 : Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques Power frequency magnetic field immunity test IEC 61000-4-9 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques Pulse magnetic field immunity test

IEC 61000-4-11 : Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests

IEC 61000-4-12 : Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques Ring wave immunity test

IEC 61166 : 1993 High-voltage alternating circuit breakers Guide for seismic qualification of highvoltage alternating current

IS 14700 (Part 4/Sec 8) : 2008 Electromagnetic Compatibility (EMC) - Part 4 : Testing and Measurement Techniques - Section 8 : Power Frequency Magnetic Field Immunity Test IS 14700 (Part 4/Sec 9) : 2008 Electromagnetic Compatibility (EMC) - Part 4 : Testing and Measurement Techniques, Section 9 Pulse Magnetic Field Immunity Test IS 14700 (Part 4/Sec 11) : 2008 Electromagnetic compatibility (EMC) : Part 4 Testing and measurement techniques, Sec 11 Voltage dips, short interrutions and voltage variations immunity tests IS 14700 (Part 4/Sec 12) : 2008 Electromagnetic Compatibility (EMC) - Part 4 : Testing and Measurement Techniques - Section 12 : Oscillatory Waves Immunity Test IS 14674 : 1999 High Voltage Alternating Current Circuitbreakers-guide for Seismic Qualification of High Voltage Alternating Current Circuitbreakers

-do-

-do-

-do-

-do-

Identical

The technical committee has reviewed the provisions of the following international standards referred in this adopted standard and decided that they are acceptable for use in conjunction with this standard. IEC 60028 : 1925 IEC 60121 IEC 60060-2-6 : 1995 IEC 60060-2-17 IEC 60068-2-75 IEC 60255-22-1 : 1988 International standard of resistance for copper Recommendation for commercial annealed aluminium electrical conductor High-voltage test techniques - Part 2 : Tests Test Fc : Vibration (sinusoidal) High-voltage test techniques - Part 2 : Tests Test Q : Sealing High-voltage test techniques - Part 2 : Tests Test EH : Hammer test Electrical relays Part 22: Electrica;l disturbance tests for measuring relays and protection equipment Section 2 : Electrostatic discharge tests Standard colours for insulation for low-frequency cables and wires Graphical Symbols for use on equipment Guide to the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment Guide for selection of insulators in respect of polluted conditions Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

IEC 60304 : 1982 IEC 60417 (all parts) IEC 60480 : 1974 IEC 60815 : 1986 IEC 61000-4-5 :

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test IEC 61000-4-13 : Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests IEC 61000-4-29 : Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests IEC 61025 : 1990 Fault tree analysis (FTA) IEC/TS 61462 : 1998 Composite insulators Hollow insulators for use in outdoor and indoor electrical equipment Definitions, test method, acceptance criteria and design recommendations IEC 61850-3 Communication networks and systems in substations - Part 3: General requirements IEC 61850-9-1 Communication networks and systems in substations - Part 9-1: Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link CISPR Industrial scientific and medical (ISM) radio-frequency equipment magnetic disturbance characteristics Limits and methods of measurement EIS RS- 485 Standard for electrical characteristics of generators and receivers for use balanced digital multipoint systems EN 50160 : 2000 Voltage characteristics of electricity supplied by public distribution system Only the English language text of the International Standard has been retained while adopting it as an Indian Standard, and as such the page numbers given here are not the same as in IEC Publication. For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated expressing the result of a test, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding of numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

IEC 61000-4-10 :

Note: The technical content of the documents is not available on website. For details, please refer the corresponding IEC 60040 (Part 8) : 2002 or kindly contact: Head Electrotechnical Department Bureau of Indian Standards 9, B. S. Zafar Marg, New Delhi-110002 Email: eetd@bis.org.in Telephone/ fax: 011-23231192

Você também pode gostar