Escolar Documentos
Profissional Documentos
Cultura Documentos
Table Of Contents
Installation.............................................................................................................1
System Requirements...........................................................................................1
International Users Important Information.............................................................4
Licensing and installation options .........................................................................5
Installation.............................................................................................................7
Check List Prior to Installation: ..........................................................................7
EDSA Create Administrator ..................................................................................9
Network Installation .........................................................................................11
License Server Installation..................................................................................11
Configuring the EDSA License Server ................................................................14
First, you must contact EDSA and provide the following: ............................14
EDSA Server License Manager ..........................................................................16
EDSA Client License Manager ...........................................................................18
Configuring Workstations for a floating license ...................................................21
License Server installation Issues.......................................................................23
General installation FAQ.....................................................................................24
Uninstalling EDSA License Server......................................................................26
Workstation Installation ...................................................................................27
Installation...........................................................................................................27
Check List Prior to Installation: ........................................................................27
Single Machine Installation .................................................................................29
EDSA Installation Password Request..........................................................30
EDSA Client License Manager ...........................................................................31
General installation FAQ.....................................................................................34
Uninstalling EDSA Technical from a Workstation ...............................................36
Index ...................................................................................................................39
iii
Installation
System Requirements
Minimum Workstation
Configuration
Hardware Required
Intel Pentium III Processor
1Ghz of Faster
32MB Graphics Display card
with 32bit color support
20 GB Available Hard Disk
Drive Space
17 inch or larger monitor with
at least 1024x768 display
resolution
Parallel, Serial or USB ports
Mouse/pointer (Microsoft
IntelliMouse recommended);
CD-ROM drive
Operating System Required
Microsoft Windows 2000
Service Pack 4 or
Microsoft Windows XP Home
or Professional Edition Service
Pack 1
Microsoft .Net Framework
RAM Memory Required
512MB
Software Required
Microsoft Internet Explorer 5.0
or higher
Optional Software and
Hardware
Sound Card and Speakers
Microsoft Office 2000 or
Higher
Autodesk Voloview Express
Workstation Configuration for
1000- 2000 Bus Networks
o
o
Required
Intel Xeon processors up
to 3.20GHz with 2MB L3
cache
(Dual Capable) 533MHz front
side bus
256MB Graphics Display card
with 32bit color support
dual monitor DVI or VGA
capable
120 GB Available Hard Disk
Drive Space
Dual 21 inch or larger monitor
with at least 1024x768 display
resolution
Parallel, Serial or USB ports
Mouse/pointer (Microsoft
IntelliMouse recommended);
CD-ROM drive
Operating System Required
Microsoft Windows 2000
Service Pack 4 or
Microsoft Windows XP Home
or Professional Edition Service
Pack 1
Microsoft .Net Framework
RAM Memory Required
4GB-8GB dual-channel DDR
266MHz SDRAM memory
Software Required
Microsoft Internet Explorer 5.0
or higher
Optional Software and
Hardware
Sound Card and Speakers
Microsoft Office 2000 or
Higher
Autodesk Voloview Express
Installation
Though EDSA-Micro Corporation makes every effort to keep its functionality on the older
Microsoft operating systems, the capabilities of the older Windows platforms are easily
overloaded by todays graphics-intensive applications.
If things are not working OK for you, a large percentage of problems are on systems that are
older than Windows 2000. For this reason, we greatly recommend the upgrade of your operating
system to Windows 2000 or XP.
EDSA recommends that the working project files be stored on a local hard disk, instead of on a
network drive, because the slowdowns in the network are causing many problems in the
operation of the program and its storage of data.
We recommend that the user back up the files by copying to the network. Your IT staff can help
you create a Batch file to copy your projects to the network, and can set this up to be run on a
scheduled basis.
If you do not do set your regional settings correctly, busbars and other length
dependant equipment will not display properly and you may get an Actrix.exe
graph engine error. This is due to the fact that for example a value of 1.001 (one
point 001 meter busbar is read as 1,001 (one thousand one)) which creates
graphic rendering problems.
Your Regional Settings should appear as shown below. Do not install or use
EDSA Technical until these changes have been made.
Installation
Floating License
The floating license configuration allows you to install EDSA on more
workstations than the number of EDSA licenses purchased.
An EDSA License Server (simply an NT or Windows 2000 service called EDSA
License Server) is installed and configured. The role of this service is to control
access to the EDSA licenses by limiting the number of concurrent EDSA users to
the number of purchased EDSA licenses.
a Windows NT or 2000/2003 network configured with TCP/IP and static IP address for
the license server.
A server or workstation running Windows 2000/2003 or Windows NT 4 (Service Pack 6)
or higher, that is configured as the EDSA License Server is also required.
Compaq Teaming
FlexLM is unable to grab the HostID when Compaq Teaming is enabled. Therefore, this is
not a valid configuration for EDSA License Server since FlexLM does not support Compaq
Teaming.
The EDSA Client License Manager manages EDSA Technical licensing on Single user
workstations. See the section EDSA Client License Manager for more information about this
licensing component.
The EDSA Server License Manager manages EDSA Technical licensing in a networked
environment with an EDSA License Server. See the section EDSA Client Server Manager for
more information about this licensing component.
Installation
Installation
This section describes how to install the EDSA Technical software package.
Please read all the sections about installation and EDSA licensing before
attempting to install EDSA Technical
Before installing EDSA, please exit all programs and turn off any virus detection
and screen saver software running on your workstation.
Users must make sure that they have local administrator rights on the
workstation where they are installing EDSA, otherwise EDSA will not install
properly.
EDSA Technical 2000 will not coexist with older versions of EDSA software. The
EDSA Technical installer will remove previous versions of EDSA from your
workstation or upgrade a previous version of EDSA Technical to the new
versions.
Installation
Once you have an administrator account established, you can then use this
account to create additional administrators or other user accounts.
This feature is used to control access to project drawings and the database.
Privileges are assigned by project managers for the project. They are assigned to
users who have been created by Administrators.
Privileges
Read
Write
Delete
Approve
Reader
OK
No
No
No
Writer
OK
OK
OK
No
Manager
OK
OK
OK
OK
9
No
No
10
OK
Installation
Network Installation
a Windows NT or 2000/2003 network configured with TCP/IP and static IP address for
the license server.
A server or workstation running Windows 2000/2003 or Windows NT 4 (Service Pack 6)
or higher, that is configured as the EDSA License Server is also required.
You must physically be at the server you wish to install the license
manager on.
Exit all programs and turn off any virus detection and screen-saver
software on your server. This prevents possible conflicts between the
EDSA License Server installer and other programs.
Make sure that you have local administrator rights on the workstation or
server where you are installing EDSA License Server, otherwise the
installer will not run.
Insert the EDSA Technical CD into your CD-ROM drive. Cancel the
EDSA Technical installer if it starts.
Click Start from the taskbar and select Run. In the Run window, type
x:\LicenseServer\setup (where x: is the drive containing the EDSA
Technical CD), then click OK.
Once the installer launches, it will check to make sure the version of
Windows Installer on your workstation is up-to-date. For workstations
where Windows Installer isnt installed, the EDSA License Server installer
will update the version of Windows Installer and then ask to reboot your
11
After the Windows Installer is up to date, you will see the Welcome Screen
as shown. Follow the screen instructions:
Choosing Custom allows you to change the install path of EDSA License
Server.
Compaq Teaming
FlexLM is unable to grab the HostID when Compaq Teaming is enabled. Therefore, this is
not a valid configuration for EDSA License Server since FlexLM does not support Compaq
Teaming.
12
Installation
13
Click the OK button to go back to the main SLM window. Note: The OK
button will remain disabled unless the correct password is typed in.
14
Installation
Once the EDSA License Server has been configured correctly, it should
look similar to the figure below. which shows the EDSA License Server
with IP address 192.168.1.3 configured with CORE_100 package.
Harmonics and Block-Based Reliability programs are configured as addons to CORE_100.
Clicking Generate License from SLM main window will create the EDSA
License Server license. The View edsalm.log and View License File
buttons are typically used for diagnostic purposes.
Successful generation of the license results in the Success window shown
below. The SLM also starts the EDSA License Server service
automatically.
15
The SLM shows the current EDSA license server configuration. The Serial
Number field can be modified in the event that the EDSA serial number was
entered improperly during the installation. The Host ID field is read-only and
will be different for each server. The server IP address is automatically filled in
based on the servers current TCP/IP configuration.
By default, the EDSA License Server isnt started until it is properly configured
using the SLM. EDSA Technical workstations configured using a floating license
will not run until the EDSA License Server is configured and running.
Where does the Host ID come from?
The Host ID is the last 8 characters of the MAC address of the network card SLM
sees. If you have multiple network cards, it is important that the Host ID match
16
Installation
the network card connected to the EDSA workstations, otherwise the license
manager will not function properly.
What can I do if SLM is seeing the wrong card?
FlexLM looks for the first NIC card in the system when locking to the MAC
address. If the first NIC happens to be configured as the backup system, then
what you can do is the following:
Install license server and see which network card FlexLM picks up by looking at
the HOST ID in EDSA server license manager. Match the HOST ID with the last
8 digits of the MAC address to find which NIC it is. If it's the wrong NIC, then
swap the IP addresses of the NIC's so that the FlexLM-recognized-NIC is the one
serving the users, not the backups.
17
Show me how
The CLM shows the current EDSA license configuration for the workstation. The
Serial Number field can be modified in the event that the EDSA serial number
was entered improperly during the installation. The Host ID field is read-only
and will be different for each workstation.
The default EDSA license installed with a new EDSA Technical workstation is a
demo license, which expires 14 days after the install. The license for the
18
Installation
workstation should be configured as soon as possible before the demo license
expires. The EDSA license can be configured 2 ways, as discussed in the
previous EDSA Licensing section: Local Host License and Floating License.
Configuring a Local Host License
Make sure the Local Host License button is selected.
Obtain package and optional program passwords from EDSA to enable
the desired EDSA Technical components.
EDSA must be contacted in order to obtain passwords
Click the OK button to go back to the main CLM window. Note: The OK
button will remain disabled unless the correct password is typed in.
19
20
After all package and program information has been entered, click the
Generate License button.
The Success window shown below will appear once the license has been
generated for the EDSA Technical workstation.
Installation
Use the Configured Package pull-down field to choose the package that
the EDSA License Server is to be configured with.
Enter the network name or IP address of the server where the EDSA
License Server is running. Figure below shows an example of the proper
way to configure a floating license for a server named Server-1
configured to use the CORE_100 package.
21
22
Click on the Generate License button to generate the floating license for
the EDSA Technical workstation.
Installation
Install license server and see which network card FlexLM picks up by
looking at the HOST ID in EDSA server license manager.
Match the HOST ID with the last 8 digits of the MAC address to find which
NIC it is. If it's the wrong NIC, then swap the IP addresses of the NIC's so
that the FlexLM-recognized-NIC is the one serving the users.
Compaq Teaming
FlexLM is unable to grab the HostID when Compaq Teaming is enabled. Therefore, this is
not a valid configuration for EDSA License Server since FlexLM does not support Compaq
Teaming.
23
Getting Passwords
MS Explorer
Requirements
When I try to run EDSA Technical I get an Error "Microsoft Visual Basic for Applications
Error -214722024 invalid index specified" how can I fix this?
The error occurs if the software was installed by an Administrator and then a
different user logs on and tries to run the application.
Please make sure user has Power User rights on the PC. Next, follow
these steps.
Exit EDSA and log on under the end user account name.
From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar.
EDSA will launch and properly configure its environment for the end user.
Show me how
Why does this occur?
The EDSA User Interface (UI) is defined based on a user profile. The changes
to the EDSA UI are 'per user" so if the Administrator has logged on and loaded
the software, the toolbars are set for that account. When another user logs on,
they now have the above procedure to add the interface buttons for themselves.
AutoCAD user 'profiles' act similarly.
My toolbar icons are all blank or appear as a row of Autodesk A icons, how can I fix this?
Please make sure user has Power User rights on the PC. Next, follow
these steps.
Exit EDSA and log on under the end user account name.
From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar.
EDSA will launch and properly configure its environment for the end user.
Show me how
24
Installation
How do I get a password for my Technical Installation?
Please call:
1-858-675-9211 extension 201, 204, 205 or 208
email:
techsupport@edsa.com
Fax:
1-858-675-9724 with your serial number, host ID, package type and indicate local machine or
server install
The Help files that accompany Technical use Microsoft Internet Explorer
technology and require that this application be installed and running.
25
26
Installation
Workstation Installation
Installation
This section describes how to install the EDSA Technical software package.
Please read all the sections about installation and EDSA licensing before
attempting to install EDSA Technical
Before installing EDSA, please exit all programs and turn off any virus detection
and screen saver software running on your workstation.
Users must make sure that they have local administrator rights on the
workstation where they are installing EDSA, otherwise EDSA will not install
properly.
27
28
Installation
Exit all programs and turn off any virus detection and screen-saver
software on your workstation. This prevents possible conflicts between
the EDSA Technical installer and other programs.
Make sure that you have local administrator rights on the workstation you
are installing EDSA Technical; otherwise the installer will not run.
Insert the EDSA Technical CD into your CD-ROM drive.
The EDSA Technical installer should automatically start but if it doesn't,
click Start from the taskbar and select Run. In the Run window, type
x:\setup (where x: is the drive containing the EDSA Technical CD), then
click OK.
Please follow the screen instructions.
Important: The installation folder must not have any spaces or periods in it, as
this will cause problems in the EDSA Technical environment.
If you leave Configure EDSA Client License checked, it will launch the
EDSA Client License Manager (covered in a later section entitled EDSA
Client License Manager).
You may choose to un-check the Create Admin Account. If you leave
the Create EDSA Admin Account checked it will launch the EDSA Create
Administrator utility (covered a later section entitled EDSA Create
Administrator) you will be asked to assign a system administrator account.
29
Log out as Administrator and log back in under the user account that will
be using EDSA.
From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar.
EDSA will launch and properly configure its environment for the end user.
Show me how
At the end of the installation the program asks if I wish to assign an administrator account,
should I?
You may hit cancel and use the program as is. This feature is provided for those who wish to
assign administrators, managers, and other rights and privileges to those accessing EDSA
drawings and data.
Press the Finish button. EDSA Technical will temporarily launch to establish user profile and
toolbars and then automatically shut down. As a final step, your workstation must be restarted to
complete the configuration changes required by EDSA Technical.
30
Installation
Show me how
The CLM shows the current EDSA license configuration for the workstation. The
Serial Number field can be modified in the event that the EDSA serial number
was entered improperly during the installation. The Host ID field is read-only
and will be different for each workstation.
The default EDSA license installed with a new EDSA Technical workstation is a
demo license, which expires 14 days after the install. The license for the
31
Click the OK button to go back to the main CLM window. Note: The OK
button will remain disabled unless the correct password is typed in.
32
Installation
After all package and program information has been entered, click the
Generate License button.
The Success window shown below will appear once the license has been
generated for the EDSA Technical workstation.
33
Getting Passwords
MS Explorer
Requirements
When I try to run EDSA Technical I get an Error "Microsoft Visual Basic for Applications
Error -214722024 invalid index specified" how can I fix this?
The error occurs if the software was installed by an Administrator and then a
different user logs on and tries to run the application.
Please make sure user has Power User rights on the PC. Next, follow
these steps.
Exit EDSA and log on under the end user account name.
From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar.
EDSA will launch and properly configure its environment for the end user.
Show me how
Why does this occur?
The EDSA User Interface (UI) is defined based on a user profile. The changes
to the EDSA UI are 'per user" so if the Administrator has logged on and loaded
the software, the toolbars are set for that account. When another user logs on,
they now have the above procedure to add the interface buttons for themselves.
AutoCAD user 'profiles' act similarly.
My toolbar icons are all blank or appear as a row of Autodesk A icons, how can I fix this?
Please make sure user has Power User rights on the PC. Next, follow
these steps.
Exit EDSA and log on under the end user account name.
From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar.
EDSA will launch and properly configure its environment for the end user.
Show me how
34
Installation
How do I get a password for my Technical Installation?
Please call:
1-858-675-9211 extension 201, 204, 205 or 208
email:
techsupport@edsa.com
Fax:
1-858-675-9724 with your serial number, host ID, package type and indicate local machine or
server install
The Help files that accompany Technical use Microsoft Internet Explorer
technology and require that this application be installed and running.
35
Show me how
From the EDSA CD, go to the Misc folder and choose the Cleanup Folder.
Choose the Win NT folder to access the version of this program for
Windows 2000
You will see a single executable file, double click on this to run the
Windows Install Cleanup Installer.
Once installed, from the Start>Programs menu launch the Windows Install
Cleanup program.
Select and remove any version of EDSA or Autodesk Actrix.
This tool will completely remove any reference to EDSA from the registry.
You can also download this tool from Microsoft web site at:
http://download.microsoft.com/download/office2000pro/util20/1/NT4/ENUS/msicuu.exe
IMPORTANT: The Msicu.exe and Msicuu.exe (Windows Installer CleanUp)
utilities are not supported on computers on which Microsoft Windows Installer 2.0
or later is installed, including Microsoft Windows XP. Follow these steps to verify
your version of the Windows Installer:
36
Installation
Locate the Msi.dll file on your computer. By default, this file is in the
Winnt\System32 folder on Microsoft Windows 2000 based computers.
Right-click the Msi.dll file, and then click Properties.
Click the Version tab. If your version is earlier than 2.0, the Windows
Installer CleanUp utility is supported on your computer.
37
Index
1
1.001
value............................................ 4
1024x768 ...................................... 29
1024x768 16-bit
set ......................................... 7, 27
1024x768 16bit ............................... 1
1024x768 16-bit .............................. 7
1024x768 16-bit ............................ 27
14-day....................................... 7, 27
2
2-seat EDSA Technical
purchase ..................................... 5
2-seat EDSA Technical................... 5
3
3MB .............................................. 11
5
512MB RAM ................................... 1
8
8am-5pm PST............................... 29
A
Accessing
EDSA .................................... 5, 29
Accessing ....................................... 5
Accessing ..................................... 29
Actrix.exe
get ............................................... 4
Actrix.exe ........................................ 4
Add/remove applet........................ 36
Add/Remove Programs Applet
Open ................................... 26, 36
Add/Remove Programs Applet...... 26
Add/Remove Programs Applet...... 36
Add-ons
CORE_100 ................................ 14
Add-ons ........................................ 14
Administrator................. 9, 24, 29, 34
After EDSA License ...................... 11
After EDSA Technical ................... 29
Answers .................................. 24, 34
Applications Error
Microsoft Visual Basic ......... 24, 34
Applications Error..........................24
Applications Error..........................34
AutoCAD .................................24, 34
Autodesk
row.......................................24, 34
Autodesk .......................................24
Autodesk .......................................34
Autodesk Actrix .............................36
B
Back
Power User................................29
Back ..............................................29
Batch file
create...........................................1
Batch file .........................................1
Better...............................................1
Bitmap file ...............................24, 34
Block-Based Reliability..................14
Busbar.............................................4
Busbars ...........................................4
C
C 11
Cancel
EDSA Technical.........................11
Cancel ...........................................11
CD-ROMs............................1, 11, 29
Change..........................................36
Changing
EDSA UI ..............................24, 34
Changing.......................................24
Changing.......................................34
Check List Prior
Installation .............................7, 27
Check List Prior...............................7
Check List Prior.............................27
Choose
Cleanup Folder ..........................36
EDSA->EDSA Server License
Manager.................................16
EDSA->Licensing->EDSA Client
License Manager..............18, 31
Win NT.......................................36
39
40
CreateAdmin.exe ............................9
Creating
Batch file......................................1
EDSA...........................................9
EDSA License Server ................14
Creating...........................................1
Creating...........................................9
Creating.........................................14
Custom..........................................11
D
Decimal Symbol ..............................4
DEMO ...........................................29
Digit Group ......................................4
Digit Grouping Symbol ....................4
DO NOT INSTALL EDSA
TECHNICAL AND THE EDSA
LICENSE SERVER ON THE
SAME WORKSTATION...5, 11, 23
E
EDSA
access ...................................5, 29
control..........................................9
create...........................................9
granting........................................9
installing.................................7, 27
number ........................................5
removing....................................36
EDSA ..........................................1, 4
EDSA ..............................................5
EDSA ..............................................7
EDSA ..............................................9
EDSA ............................................11
EDSA ............................................14
EDSA ............................................16
EDSA ............................................18
EDSA ............................................23
EDSA ............................................24
EDSA ............................................27
EDSA ............................................29
EDSA ............................................31
EDSA ............................................34
EDSA ............................................36
EDSA CD ......................................36
EDSA Client License Manager
launch ........................................29
Run ............................................21
Index
EDSA Client License Manager . 5, 18
EDSA Client License Manager ..... 21
EDSA Client License Manager ..... 29
EDSA Client License Manager ..... 31
EDSA Client Server Manager ......... 5
EDSA CLM ............................. 18, 31
EDSA Create Administrator
launch........................................ 29
EDSA Create Administrator ............ 9
EDSA Create Administrator .......... 29
EDSA Installation Password Request
.................................................. 29
EDSA License............... 7, 18, 27, 31
EDSA License Certificate... 7, 14, 18,
27, 31
EDSA License Server
Configuring ................................ 14
create ........................................ 14
end ............................................ 16
installing .................................... 11
shows ........................................ 14
starts ......................................... 14
EDSA License Server ..................... 5
EDSA License Server ................... 11
EDSA License Server ................... 14
EDSA License Server ................... 16
EDSA License Server ................... 21
EDSA License Server ................... 23
EDSA License Server ................... 26
EDSA License Server isnt............ 16
EDSA Server License Manager
launch........................................ 11
EDSA Server License Manager ...... 5
EDSA Server License Manager .... 11
EDSA Server License Manager .... 16
EDSA SLM.................................... 16
EDSA Technical
Cancel ....................................... 11
end ...................................... 18, 31
generated ............................ 18, 31
install ............................... 7, 27, 29
re-installing .................................. 9
EDSA Technical.......................... 4, 5
EDSA Technical.............................. 7
EDSA Technical.............................. 9
EDSA Technical............................ 11
41
42
Host ID ..........................................16
Host ID ..........................................23
Host ID ..........................................27
HostID
grab .................................5, 11, 23
HostID .............................................5
HostID ...........................................11
HostID ...........................................23
I
ID.............................................24, 34
IMPORTANT .................................36
Include
Microsoft Windows XP...............36
Include...........................................36
Insert
EDSA Technical CD ............11, 29
Insert .............................................11
Insert .............................................29
Install
EDSA.....................................7, 27
EDSA License Server ................11
EDSA Technical...............7, 27, 29
Install...............................................7
Install.............................................11
Install.............................................27
Install.............................................29
Install EDSA Technical..................21
Installation
Check List Prior .....................7, 27
Installation .......................................7
Installation .....................................27
Installation options...........................5
International Users Important
Information...................................4
Internet Explorer 5.5..................7, 27
IP
swap ....................................16, 23
IP 5, 11, 14
IP 16
IP 21
IP 23
IT 1
K
Kbprb kbsetup kbui KB329369......36
L
Launch
Index
EDSA Client License Manager .. 29
EDSA Create Administrator....... 29
EDSA Server License Manager. 11
Launch .......................................... 11
Launch .......................................... 29
License
floating................................... 5, 21
License ........................................... 5
License ......................................... 21
License Server Installation............ 11
License Server installation Issues. 23
LicenseServer/setup ..................... 11
List Separator ................................. 4
Listen
Tutorials ...................................... 1
Listen .............................................. 1
Local Administrator ......................... 1
Local Host License.................. 18, 31
Configuring .......................... 18, 31
Local Host License.......................... 5
Local Host License........................ 18
Local Host License........................ 31
Locate
Msi.dll file .................................. 36
Locate ........................................... 36
Locking
MAC .................................... 16, 23
Locking ......................................... 16
Locking ......................................... 23
Logon............................................ 29
M
MAC
locking ................................. 16, 23
MAC.............................................. 16
MAC.............................................. 23
Macrovision..................................... 5
Match
HOST ID.............................. 16, 23
Match ............................................ 16
Match ............................................ 23
Microsoft ................................... 1, 36
Microsoft Document Info ............... 36
Microsoft Internet Explorer...... 24, 34
Microsoft Internet Explorer 5.5........ 1
Microsoft Knowledge Base Article. 36
Microsoft Office 2000 ...................... 1
43
44
Select ............................................11
Select EDSA License Manager .....26
Select EDSA Technical .................36
Separator Symbol............................4
Serial Number ...................16, 18, 31
Server............................................23
Servers .........................................16
Server-1 ........................................21
Service Pack .............................5, 11
Set
1024x768 16-bit .....................7, 27
Set...................................................7
Set.................................................27
Setup Type window .......................11
Shows
EDSA License Server ................14
Shows ...........................................14
Single ..............................................5
Single Machine Installation............29
SLM.........................................14, 16
SLM window..................................14
Sound Card .....................................1
Speakers .........................................1
Start button........................24, 29, 34
Start Menu->Programs Menu .16, 18,
31
Start>Programs menu ...................36
Start>Settings>Control Panel..........4
Starting
EDSA License Server ................14
Starting..........................................11
Starting..........................................14
Starting..........................................29
Success window................14, 18, 31
Swap
IP 16, 23
Swap .............................................16
Swap .............................................23
System Requirements .....................1
T
T 18, 31
Taskbar ...................................11, 29
TCP/IP.................................5, 11, 16
Technical.................................24, 34
Technical Installation...............24, 34
Though EDSA-Micro Corporation....1
Index
Toolbars............................ 24, 29, 34
Tutorials
listen............................................ 1
Tutorials .......................................... 1
Two NIC Cards ............................. 23
U
UI ............................................ 24, 34
Uninstalled .................................... 26
Uninstalling EDSA License Server 26
Uninstalling EDSA Technical ........ 36
Use
CORE_100 ................................ 21
Use ............................................... 21
Use License Server....................... 21
Utility ............................................... 9
V
Values
1.001 ........................................... 4
Values............................................. 4
Version.......................................... 36
View edsalm.log............................ 14
View License File .......................... 14
W
Welcome....................................... 36
Welcome Screen
see ............................................ 11
Welcome Screen........................... 11
Win NT
Choose...................................... 36
Win NT.......................................... 36
WINDOWS.................................. 1, 5
Windows 2000
program..................................... 36
running...................................5, 11
Windows 2000.................................1
Windows 2000.................................5
Windows 2000...............................11
Windows 2000...............................36
Windows 2000 Only ......................36
Windows 2000 Service Pack...........1
Windows Install Cleanup ...............36
Windows Install Cleanup Installer
run .............................................36
Windows Install Cleanup Installer .36
Windows Installer ....................11, 36
Windows Installer CleanUp ...........36
Windows Installer isnt...................11
Windows NT..............................5, 11
Windows XP Home Edition Service
Pack.............................................1
Windows XP Professional Edition
Service Pack................................1
Winnt/System32 ............................36
Work
OK ...............................................1
Work................................................1
Workstations...........................18, 31
Workstations
Configuring ................................21
Workstations .................................21
Workstations .................................36
X
XP ...................................................1
Y
Youve ...............................14, 18, 31
45