Escolar Documentos
Profissional Documentos
Cultura Documentos
5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 3.3V
Features
l l l l l l l l l Fast Transient Response Guaranteed Dropout Voltage at Multiple Currents Load Regulation :0.05% Typ. Line Regulation : 0.03% Typ. Low Dropout Voltage: 1.3V Typ. at IOUT =5A Trimmed Current Limit : 5A Typ. at TJ=125 C On-Chip Thermal Limiting : 150 C Typ. Standard 3-pin TO-220, TO-252, and TO-263 Power Packages Lead Free and Green Devices Available (RoHS Compliant)
General Description
The APL1084 is a low dropout three-terminal adjustable regulator with 5A output current capability. In order to obtain lower dropout voltage and speed up transient response, which is critical for low voltage applications, the APL1084 has been optimized. The output available voltage range of adjustable version is from 1.25 to 5.75V with an input supply below 7V, and the fixed 3.3V output voltage device is also available. Current limit is trimmed to ensure specified output current and controlled shortcircuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL1084 is available in both the through-hole and surface mount versions of the industry standard 3-pin TO-220,TO-252, and TO-263 power packages.
Pin Configuration
3
TAB is V OUT
2 1
Applications
l l l PentiumTM Processor Supplies PowerPCTM Supplies Low Voltage Logic Supplies Battery-Powered Circuitry Post Regulator for Switching Power Supply
3
TAB is V OUT
V IN V OUT ADJ
2 1
l l
TAB is VOUT
2 1
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. B.12 - Oct., 2008 1 www.anpec.com.tw
APL1084
Ordering and Marking Information
APL1084 Assembly Material Handling Code Temperature Range Package Code Voltage Code Package Code F : TO-220 G : TO-263 U : TO-252 Operating Ambient Temperature Range C : 0 to 70 oC Handling Code TR : Tape & Reel TU : Tube Voltage Code : 33 : 3.3V Blank : Adjustable Version Assembly Material L : Lead Free Device G : Halogen And Lead Free Device XXXXX - Date Code
APL1084 :
APL1084- 33 :
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC defines Green to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight).
(Note 1) Rating 7 Control Section Power Transistor 0 to 125 0 to 150 -65 to +150 260 Unit V C C C
Note 1 : Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Electrical Characteristics
Symbol VREF VOUT Line Regulation REGLINE Load Regulation REGLOAD Dropout Voltage VD Parameter Reference Voltage Output Voltage Test Conditions Min. 1.225 (-2%) 3.235 (-2%) APL1084 Typ. 1.250 3.300 Max. 1.275 (+2%) 3.365 (+2%) 0.2 Unit V V
1.5V(VIN -VOUT) 5.75V, APL1084 10mA IOUT 5A, TJ =0~125C 10mA IOUT 5A, 4.75VVIN 7V, APL1084-3.3 TJ =0~125C TJ =0~125C, (Note 2) APL1084 2.75VVIN 7V, IOUT=10mA, APL1084-3.3 4.75VVIN 7V, IOUT=0mA, TJ=25C, (Notes 2) APL1084 (VIN -VOUT)=3V, 10mA IOUT 5A APL1084-3.3 VI N=5V, 0mA IOUT 5A VREF=1%, IOUT=3A,TJ =0~125C VREF=1%, IOUT=5A,TJ =0~125C
0.03
V 1.5
www.anpec.com.tw
APL1084
Electrical Characteristics (Cont.)
Symbol Parameter Test Conditions (VIN -VOUT)=1.7V, TJ=25C TJ=125C (VIN -VOUT)=3V, TJ=25C TJ=125C (VIN -VOUT)=3V, IOUT=10mA, TJ=0125C 1.5V(VIN -VOUT)5.75V, 10mA IOUT5A 1.5V(VIN -VOUT)5.75V, TJ=0125C VI N=5V Min. 6.0 5.0 6.5 5.5 APL1084 Typ. 7.6 6.0 8.2 6.5 60 0.2 2 8 A Max. Unit
ILIMIT
Current Limit
Adjust Pin Current APL1084 Adjust Pin Current Change APL1084 Minimum Load Current APL1084 Quiescent Current APL1084-3.3 Ripple Rejection APL1084
120 5 10 13
A A mA mA
PSRR
F=120Hz, Cout=22F, Tant., (VIN -VOUT)=3V, IOUT=5A F=120Hz, Cout=22F, Tant., APL1084-3.3 (VIN =6.3V, IOUT=5A TJ =125C, 1000Hrs. TJ=25C, 10HzF10kHz
60
dB
LS VN
0.03 0.003
1.0 -
% %
Thermal Resistance (Note 3) 6.0 th,J-TAB C/ W Junction-to-Case, at TAB TO-263 50 Thermal Resistance C/ W th,J-AMB Junction-to-Ambient 62.5 TO-252 Note 2: See thermal regulation specifications for changes in output voltage due to heating effects. Load and line regulations are measured at a constant junction temperature by low duty cycle pulse testing. Note 3 :The value could be varied when heat sink size is different. Use larger heat sink or larger PCB size, which improves th,TAB-A, to improve overall thermal resistance (th,J-A).
www.anpec.com.tw
APL1084
Typical Operating Characteristics
Dropout Voltage vs. Output Current
1.5 1.4 1.3 TJ=50 C
1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0 1 2 3 Output Current (A) 4 5 TJ=125 C TJ=25 C TJ=0 C
14 13 12 11 10 9 8 7 6 -50
Temperature (C)
1.260 1.255 1.250 1.245 1.240 1.235 1.230 1.225 -50 0 50 100 Temperature (C) 150
1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 125 150
Temperature (C) Copyright ANPEC Electronics Corp. Rev. B.12 - Oct., 2008 4
www.anpec.com.tw
APL1084
Typical Operating Characteristics (Cont.)
Ripple Rejection vs. Frequency
90 80
Frequency (Hz)
www.anpec.com.tw
APL1084
Typical Application Circuits
Typical Regulator
VIN (2.75V~7V)
APL1084 10 F + C1 +
5V to 3.3V Regulator
VIN (5V) 10 F C1 +
APL1084 + R1
R2 VOUT=(R1+R2)/R1*1.250V
www.anpec.com.tw
APL1084
Package Information
TO-252
E b3 L3 A c2 E1
L4
SEE VIEW A
S Y M B O L A A1 b b3 c c2 D D1 E E1 e H L L3 L4 0
TO-252 MILLIMETERS MIN. 2.18 MAX. 2.39 0.13 0.50 4.95 0.46 0.46 5.33 4.57 6.35 3.81 2.29 BSC 9.40 0.90 0.89 10.41 1.78 2.03 1.02 0 8 0 0.370 0.035 0.035 0.89 5.46 0.61 0.89 6.22 6.00 6.73 6.00 0.020 0.195 0.018 0.018 0.210 0.180 0.250 0.150 0.090 BSC 0.410 0.070 0.080 0.040 8 MIN. 0.086 INCHES MAX. 0.094 0.005 0.035 0.215 0.024 0.035 0.245 0.236 0.265 0.236
D1
0
www.anpec.com.tw
APL1084
Package Information
TO-263
A E L1 c2 E1
b b2
L2
c e SEE VIEW A
S Y M B O L A A1 b b2 c c2 D D1 E E1 e H L L1 L2
TO-263 MILLIMETERS MIN. 4.06 0.00 0.51 1.14 0.38 1.14 8.38 6.00 9.65 6.22 2.54 BSC 14.61 1.78 15.88 2.79 1.68 1.78 0.575 0.070 MAX. 4.83 0.25 0.99 1.78 0.74 1.65 9.65 9.00 11.43 9.00 MIN. 0.160 0.000 0.020 0.045 0.015 0.045 0.330 0.236 0.380 0.245 0.100 BSC 0.625 0.110 0.066 0.070 0o 8o INCHES MAX. 0.190 0.010 0.039 0.070 0.029 0.065 0.380 0.354 0.450 0.354
o 0
o 8
D1
0
www.anpec.com.tw
APL1084
Package Information
TO-220
E E/2 A A1 E2 E1
H1
L1
D1
b b2 S Y M B O L A A1 A2 b b2 c D D1 D2 E E1 E2 e H1 L L1 P Q
A2
TO-220 MILLIMETERS MIN. 3.56 0.51 2.03 0.38 1.14 0.36 14.22 8.38 12.19 9.65 6.86 2.54 BSC 5.84 12.70 3.53 2.54 6.86 14.73 6.35 4.09 3.43 0.139 0.100 0.230 0.500 MAX. 4.83 1.40 2.92 1.02 1.78 0.61 16.51 9.02 12.88 10.67 8.89 0.76 0.100 BSC 0.270 0.580 0.250 0.161 0.135 MIN. 0.140 0.020 0.080 0.015 0.045 0.014 0.560 0.330 0.480 0.380 0.270 INCHES MAX. 0.190 0.055 0.115 0.040 0.070 0.024 0.650 0.355 0.507 0.420 0.350 0.030
www.anpec.com.tw
D2
APL1084
Carrier Tape & Reel Dimensions
OD0 P0 P2 P1 A E1 F K0 B SECTION A-A T B0 A0 OD1 B A SECTION B-B
Application
A 330.0 2.00
H A
T1
E1
TO-263
P0 4.0 0.10
Application
A 330.0 2.00
TO-252
P0 4.0 0.10
(mm)
10
www.anpec.com.tw
APL1084
Taping Direction Information
TO-252
TO-263
11
www.anpec.com.tw
APL1084
Reflow Condition (IR/Convection or VPR Reflow)
TP Ramp-up TL Tsmax tp Critical Zone TL to TP
Temperature
tL
25
t 25C to Peak
Time
Description 245C, 5 sec 1000 Hrs Bias @125C 168 Hrs, 100%RH, 121C -65C~150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms, 1tr > 100mA
6C/second max. 6C/second max. 6 minutes max. 8 minutes max. Time 25C to Peak Temperature Notes: All temperatures refer to topside of the package. Measured on the body surface.
12 www.anpec.com.tw
APL1084
Classification Reflow Profiles (Cont.)
Table 1. SnPb Eutectic Process Package Peak Reflow Temperatures 3 Package Thickness Volume mm <350 <2.5 mm 240 +0/-5C 2.5 mm 225 +0/-5C Volume mm 350 225 +0/-5C 225 +0/-5C
3
Table 2. Pb-free Process Package Classification Reflow Temperatures 3 3 3 Package Thickness Volume mm Volume mm Volume mm <350 350-2000 >2000 <1.6 mm 260 +0C* 260 +0C* 260 +0C* 1.6 mm 2.5 mm 260 +0C* 250 +0C* 245 +0C* 2.5 mm 250 +0C* 245 +0C* 245 +0C* *Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated classification temperature (this means Peak reflow temperature +0C. For example 260C+0C) at the rated MSL level.
Customer Service
Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 2F, No. 11, Lane 218, Sec 2 Jhongsing Rd., Sindian City, Taipei County 23146, Taiwan Tel : 886-2-2910-3838 Fax : 886-2-2917-3838
13
www.anpec.com.tw