Escolar Documentos
Profissional Documentos
Cultura Documentos
Transition profiles
Stopping profiles
Protection profiles
Review of technology and needs. Computer Aided Design for new products and application techniques. Laboratory tests, implementation and pre-production tests.
Expansion joints
Lighted profiles
Customized product development. Promotion programs set up. Sampling on demand. Attending international exhibitions. Up-to-date with respect to interior decoration trends.
Entrance matting
Permanent stock holding at the plant. Technical assistance: immediate hot-line response to all customer questions. Special specifications dealt with: design and manufacture of small customized series. Computerized technical databases accessible via the Internet using a secured access.
Tooling
Expansion joints
Movement joints Screed joints Structural expansion joints Flexible rubber joints
Movement joints are installed in order to allow compensation of movements occurring in larger areas of hard floor coverings (ceramic tiles, marble). Expansion joints profiles are used to cover the opening built within the structure of larger buildings in order to absorb movement of the structure. These joints have to cope with different types of loads: light, medium, heavy and wide movements. We therefore propose a wide range of profiles with extended combination possibilities.
Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Movement joints . . . . . . . . . . . . . . . . . . . . . .Light and medium duty Screed joints . . . . . . . . . . . . . . . . . . . . . . . . . . .Light and medium duty Structural expansion joints . . . . . . . .Light and medium duty . . . . . . . . . . . . . . . . .Floor expansion joint profiles . . . . . . . . . . . .Floor / Wall expansion joint profiles . . . . . . . . . . . .Wall / Wall expansion joint profiles . . . . .Light and medium duty flexible rubber joints Joints de dilatation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Heavy duty . . . . . . . . . . . . . . . . .Floor expansion joint profiles . . . . . . . . . . . . . . . . . . .Full metal expansion joint . . . . . .Wide movement expansion joints profiles . . . . . . . . . . . . . . . . . . .Floor profiles and bridges .Heavy duty flexible rubber joints for wide movement Accessories for expansion joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Expansion joints selection chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 5 6 7 8
12
13
14 15
La socit
Expansion joints
Expansion Joints
Classification via
Type of use
Light and medium duty
Place of use: schools, office buildings, hospitals, public buildings Type of traffic: pedestrian, trolleys, wheeled carts This range includes: - screed and movement joints: these rigid and compressible profiles are used to divide screeds, tiled floors (ceramic tiles, marble, stone floor) - expansion joints to be installed on all locations throughout the building where the structural architectural joint runs: floor/floor, floor/wall, wall/wall, ceiling.
Heavy duty
Place of use: shopping malls, train stations, airports, car parks Type of traffic: cars, vans, forklifts, trucks.
Wide movements
Place of use: all places where a wide architectural movement joint has been designed, seismic movement areas. Type of traffic: any heavy load.
Technical information
Type of use
Floor / floor
Recessed installation Surface mount
Floor / wall
Recessed installation Surface mount
Wall / wall
Recessed installation Surface mount
Way of installation
Recessed installation
Before screed.
Surface mount
Retro fit after screed.
Movement Joints
Light duty Medium duty Heavy duty Wide expansion movements For floor
54.00
Aluminium Brass
Available heights: 6, 8, 10, 12, 15 and 22 mm Black or grey PVC infill Other colours on request
54.00
30
H 6 > 22
24 6
54.05
30
54.01
Aluminium Brass
Mill finish Mill finish Available heights: 6, 8, 10, 12, 15 and 22 mm Black or grey PVC infill Other colours on request
54.02
54
H 6 > 22
54.02
24 6 24
54
Screed joints
Light duty Medium duty Heavy duty Wide expansion movements For floor
Brass
Mill finish
PVC
Grey
Can be fitted into place at screed installation stage or retrospectively (saw joint) 30, 40, 50 mm
Compression joint Glued-in fitting 24 mm narrow compression joint 51.50 51.52 8 mm H 8 > 12,5 51.51 10 mm 12,5 mm 6
24
PVC
Grey
55
30
20
50
50 50
50 70
50
60
8,5 or 15,5 mm
8,5
04.13
15,5
50
10,5 or 13,5 mm
10,5
04.14
Aluminium
50
Mill finish
An expansion joint sytem includes two aluminium profiles and one flexible rubber joint ( p 83 )
13,5
For floor
Surface mount profile Can be installed together with any recessed profile
04.07
30
Aluminium Aluminium
Silver Gold
04.08
50
Aluminium
Mill finish
Provides additional flexible joint support Suitable only for joint width 40 and 46 (p 83)
32
Aluminium
Mill finish
50
20
60
04.11
Aluminium Aluminium
Silver Gold
04.12
15
Can be installed together with any floor profile (surface mount or recessed)
Structural expansion joints Light and Medium duty For floor / wall
Aluminium
Mill finish
55
15
55
04.41
Aluminium Aluminium
Silver Gold
04.42
15
10
flexible
PVC
14/0/L
04.53.00
PVC PVC
14
PVC
joints accept three type of movements: expansion, compression and shear shorehardness three widths three possible covering thicknesses: 3 mm = vynil floors 5 mm carpet 8 mm = sport floorings interchangeable
20/0/L
04.50.00
36/3/L
20
04.51.40
40/0/S
04.52.20
20/0/S
04.50.20
36 40
20
36/3/S
04.51.30
46/3/S
04.52.30
26/3/S
04.50.30
36 46
46/5/S
26
04.52.40
36/5/L
04.51.50
30/0/L
12
8,5
04.51.00
36 31
46
46/8/S 40/0/L
04.52.00
04.52.50
30/0/S
04.51.10
30
40
46
11
Structural expansion joints Light and medium duty Flexible rubber joints
Aluminium
Mill finish
Kindly ask for minimum and maximum recessing depth, according to type of installation
88
45
37
60
04.21
Aluminium Aluminium
Silver Gold
04.22
Aluminium
36
Mill finish
26
04.90
40
Aluminium Brass
04.91
12
50
50
Mill finish
The combination of connecting bridge and two flexible joints allows heavy loads and wide movements
100 %
04.31
50
50 %
110
04.32
50 %
83 150
04.33
50 %
190
40/0/LX
14
04.55.00
40/0/SX
04.55.10
50/0/LX
04.56.00
18
18
14
40
35
50
50/0/SX
04.56.10
hardness
widths
PVC
interchangeable
13
Structural expansion joints Heavy duty flexible rubber joints For floor
Fixing clamps
Composition Mill finish aluminium Dimensions 20 mm width sections
04.61
Purpose Provide stability of aluminium profiles during expansion and compression movements Use Indoor and outdoor Setting up Slide them into the specific grove provided on floor aluminium Purpose Ensure tightness of joint to dust, vapour and infiltration of liquids Place of use Indoor and outdoor Fixing To be fixed to the joint before installing profiles Fits any floor/floor, floor/wall, joint models except 50/20 model Installation 2 shims set on opposite sides ; Fitting Grooved ends of strip to be clipped into specific groove of the aluminium profile before installation Fitting By pinching with the fixing pins thickness: mini 10 mm - max 15 mm profiles (except 50/20)
Watertightness strip
Composition Flexible PVC Dimensions 70 mm full width
04.60
Level shims
Composition Mill finish aluminium Dimensions 20 mm width pieces Purpose Setting profiles to level
04.65
Fixing pins
8 x 15 mm 8 x 50 mm
Composition Galvanized steel Purpose Fix the profiles for floor applications only
04.68 04.62
Spacing shims
Composition Fibre reinforced PP
04.66
Dimensions 4 models: 20, 30, 40 and 50 mm Purpose Allow perfect lining up and spacing of aluminium profiles
04.63 04.64
when fixing into the ground Installation Place shims when flexible joint not yet fitted between both aluminium profiles
st. st. screws T.F.Z 4.8 x 38 mm polyamid plug 8 x 40 mm wall surface fitting = st. screws T.F.Z 3.5 x 30 mm polyamid plug 6 x 30 mm
04.70
04.69
39.25
8 x 50 mm
Designed for quick installation of light and medium duty profiles
Joining pins
Slide it into the groove located at aluminium profile end
14
26 / 3 / S
a = 20 / e = 3 b c d 26 26 26 26 26 26 26 26 26 26 140 120 120 120 120
30 / 0 / L-S
a = 30 / e = 0 b c d 36 36 36 36 36 30 30 30 30 30 150 130 130 130 130
36 / 3 / S
a = 30 / e = 3 b c d 36 36 36 36 36 36 36 36 36 36 150 130 130 130 130
40 / 0 / L-S
a = 40 / e = 0 b c d 46 46 46 46 46 40 40 40 40 40 160 140 140 140 140
46 / 3 / S
a = 40 / e = 3 b c d 46 46 46 46 46 46 46 46 46 46 160 140 140 140 140
46 / 5 / S
a = 40 / e = 5 b c d 46 46 46 46 46 46 46 46 46 46 160 140 140 140 140
46 / 8 / S
a = 40 / e = 8 b c d 46 46 46 46 46 46 46 46 46 46 160 140 140 140 140
+5 -3 +/- 3
+6 -4 +/- 4
+8 -5 +/- 5
20 / 0 / L-S
mm 30 a = 26 / e = 0 c d 20 120 +5 -3 +/- 3
26 / 3 / S
a = 26 / e = 3 c d 26 120
30 / 0 / L-S
a = 36 / e = 0 c d 30 130 +6 -4 +/- 4
36 / 3 / S
a = 36 / e = 3 c d 36 130
40 / 0 / L-S
a = 46 / e = 0 c d 40 140
46 / 3 / S
a = 46 / e = 3 c d 46 140 +8 -5 +/- 5
46 / 5 / S
a = 46 / e = 5 c d 46 140
46 / 8 / S
a = 46 / e = 8 c d 46 140
Floor / wall
mm
20 / 0 / L-S
a = 30 / e = 0 b c d 20 20 20 20 20 73 20 100 80 80 80 80 75
26 / 3 / S
a = 30 / e = 3 b c d 26 26 26 26 26 73 26 100 80 80 80 80 75
30 / 0 / L-S
a = 40 / e = 0 b c d 30 30 30 30 30 83 30 110 90 90 90 90 85
36 / 3 / S
a = 40 / e = 3 b c d 36 36 36 36 36 83 36 110 90 90 90 90 85
40 / 0 / L-S
a = 50 / e = 0 b c d 40 40 40 40 40 93 40 120 100 100 100 100 95
46 / 3 / S
a = 50 / e = 3 b c d 46 46 46 46 46 93 46 120 100 100 100 100 95
46 / 5 / S
a = 50 / e = 5 b c d 46 46 46 46 46 93 46 120 100 100 100 100 95
46 / 8 / S
a = 50 / e = 8 b c d 46 46 46 46 46 93 46 120 100 100 100 100 95
Recessed installation
h
70 50 40 30 20
Surface mount
h 30
a = 28 / e = 0
a = 28 / e = 3
a = 38 / e = 0
a = 38 / e = 3
a = 48 / e = 0
a = 48 / e = 3 +8 -5 +/- 5
a = 48 / e = 5
a = 48 / e = 8
+5 -3 +/- 3
b c e
+6 -4 +/- 4
Surface mount
a
h = 10
Heavy duty
40 / 0 / L
mm b h = 70+ 56 a = 47 c d 40 +8 - 10 +/- 8 207
50 / 0 / L
b 66 a = 57 c d 50 + 10 - 10 +/- 8 217
50 / 0 / S
b 66 a = 57 c d 50 + 15 - 15 +/- 8 217 h 50 mm
110
a = 60 b 206 L= + 16 - 20 +/- 8
40 / 0 / L-S 150
a = 100 b 246 S=
190
a = 140 b 286 + 20 - 30 +/- 8
110
a = 80 b 226 L= + 20 - 24 +/- 8
50 / 0 / L-S 150
a = 120 b 266 S=
190
a = 160 b 306 + 30 - 34 +/- 8
15
Expansion joints
Dinac s.a.s
Head office - Factory Professional sales departement Z.I. des Marais - B.P. 29 38350 La Mure - France Tl. : +33 (0) 4 76 81 14 22 Fax : +33 (0) 4 76 30 93 03 dinac@dinac.fr
Dinac Benelux
KMO-Centrum "Ter Spei" - Speistraat 42 B-9030 Gent - Mariakerke Tl. : +32 (0) 9 225 40 05 Fax : +32 (0) 9 223 04 13 dinacbenelux@dinac.fr Service commercial Secteur Professionnel : comfrance@dinac.fr Service commercial Grand Export : comexport@dinac.fr
www.dinac.com