Escolar Documentos
Profissional Documentos
Cultura Documentos
en
Surgery
Customer number
t
Preface
t
Dear Customer,
We are pleased to present to you the new tioLogic implant system catalogue.
This catalogue is systematically designed to provide you easy access and to study all information relevant to your daily work. The section
summaries provide you with a quick general outline.
Where applicable, you will find a full scale illustration of the relevant product for better recognition. To round things off, there is a table
section containing complementary service information or technical data.
We will gladly provide advice and support at any time, be it with our innovative tioLogic product concept, our comprehensive service,
or with our competent team of specialists.
The name Dentaurum stands for superior quality, dental competence and reliability for more than 125 years. These qualities can be
equally applied to Dentaurum Implants. To us, this tradition is both chance and duty in one. Then change is the only certainty according to
the motto: better is goods enemy.
We especially recommend our comprehensive, up-to-the-minute, multilingual information on our website at www.dentaurum.de or
www.tiologic.de.
We look forward to your order which we will handle quickly with the usual dedication. We also look forward to any praise or criticism you
may have, as this enables us to become better.
Axel Winkelstroeter
CEO Dentaurum Group
Dentaurum Group
Worldwide dental competence
for over 125 years
For the Dentaurum Group in general, but especially for Dentaurum Implants, superior quality is the key to success of all involved. That is
why we are one of the first companies in this branch to be certified according to the medical device directive and the eco-audit. The
Centre for Dental Communication CDC is the first training centre in Germany to be certified.
Most importantly: at Dentaurum, quality is not just something written in QM manuals. We live quality daily, leaving you to rely on our
products and services with no ifs and buts.
Implantology
Implants
tioLogic
TIOLOX
Surgical
components
Instruments
Osteotomes
Titanium mesh
Accessories
Prosthetic
components
Impression material
Model fabrication
Abutments
Accessories
Augmentation
NanoBone
TIOMESH
Prosthetics
Alloys
Investments
Cast partial
denture | Crowns
and bridges
remanium GM 380+
remanium GM 800+
remanium GM 900
remanium star
remanium 2000+
remanium secura
remanium 2001
remanium CSe
remanium LFC
Cast partial
denture | Crowns
and bridges
rema dynamic S
rema Exakt F
rema Exakt
Castorit all speed
Castorit-super C
Trivest
rema TT
rema CC
Titanium
range
Precious
metal range
Casting metals
Wires | Bars
Attachments
Investments
Preparation set
Alloys
Solders | Fluxes
Laser welding rods
Investments
Duplicating
gels |
Duplicating
silicones
Dublitop
Dublitop micro
Dubliform
Duplikat
Dubliplast
DubliGel
rema-Sil
ecosil
Waxes
Crowns and
bridges
Patterns
Preformed wires
Rods
Sheets
Connecting waxes
Blockout waxes
StarWax
sculpting waxes
Preparation
Cast partial
denture | Crowns
and bridges
Seperating discs
Grinding discs
Burs and cutters
Polishing tools
Units
Laser welding
technology
Casting machines
Vacuum mixers
Preheat furnaces
Wax knives
Milling units
Parallelometers
Sandblasters
Duplicating unit
Orthodontics
Temporary
anchorage
system
Lingual system
magic
LinguSet
Lingual arches
Lingual instruments
Brackets
Metal | Ceramic |
Plastic
equilibrium 2
equilibrium mini
equilibrium ti
discovery sl
discovery
discovery pearl
Fascination 2
Jewels
Elegance
Buccal tubes
Ortho
Ortho-Cast
Ortho-Cast NF
rematitan
dentaform
dentaform Snap
Standard
Adhesives
Wires | Arches |
Wire attachments
Intra-/Extraoral
Extraoral appliances
Elastic ouxiliaries
Face Former
Oral screens
OrthoSafe
SUS2
Herbst IIV, TS
Supplies
Impression material
Orthalgenat Duo
laboratory
accessories
Rapidur
Expansion
screws
Ceramics
Ceramics
Ceramics
tomas
tomas auxiliaries
ConTec Duo
ConTec LC
ConTec LCR
GlasTec
Mix and No-Mix
SmartBond
Tensic
dentaflex
rematitan LITE
rematitan SPECIAL
remanium
Noninium
remaloy
Equire
white arches
Bands
Compression,
traction and
special screws
Hyrax
hyrax click
Titan-Hyrax
Variety
Orthodontic
acrylics
Orthocryl
Orthocryl black&white
Extensive range
of accessories
Novel designs
Ceramics
High-fusing alloys
CCS
CARMEN
ceraMotion Me
Ceramics
ZrO2
Triceram
ceraMotion Zr
Titan
ceraMotion Ti
Low-fusing alloys
dentCeram LF
ceraMotion Lf
Ceramics
Pressable ceramics
ceraMotion P
ceraMotion PMe
ceraMotion PZr
Slot marking
With 4 slot markings
for optimal detection
of the slot position
Depth stop
Maximum safety by
maintaining the planned
insertion depth
New undercut
Uniquely simple, ligature-free
fixation of the orthodontic
appliance using LC adhesive
Patent: DE 101 32 088
GingiFit
Polished, conical collar for perfect
gingival adaptation without the risk
of compression ideal for
preventing inflammation
Ortho-Design
Pin head in bracket design for
proven orthodontic techniques
En-mass retraction
Distalization
Intrusion
tomas-crimp hook
tomas-coil spring
tomas-cross tube
tomas-compression spring
tomas-Nikodem spring
Uprighting
tomas-uprighting spring
3 Lengths
Available in lengths
of 6, 8 and 10 mm
Different threads
Available in self-drilling or self-tapping
versions sterile/non-sterile
tomas-auxiliary kit
All essential attachments for TAD mechanics
Contents
t NanoBone bone augmentation material 60
System concept
t The tioLogic concept
Easy handling
Product identification
12 17
14 15
16 17
18 27
18 19
20 21
22 23
24 25
26 27
t Implants
t Gingiva formers
Conical
Cylindrical
61
62 63
62
63
Prosthetics
Surgery
t Planning and diagnosis
X-ray templates
Planning aids
30 31
30
31
32 36
32 33
34
34
34
35
36
36
t tioLogic pOsition
40 41
40
40
40
41
41
41
41
t tioLogic pOsition
rotary instruments
Gingiva cutter
Depth drills
Stepped countersink
Expander
Thread tap
t Trays
tioLogic easyClean surgical tray
tioLogic surgical tray
tioLogic pOsition surgical tray
tioLogic instrument tray
Osteotome Tray
TIOSET instrument tray
42 44
42
42
43
44
44
46 59
46 47
48 49
50 51
52 53
54 56
58 59
66 67
t Series of abutments S
68 75
Impression
Model
Temporary restorations
CAD/CAM Scan abutment
CAD/CAM Titanium base Zenotec
Ceramics
Precious metal
Titanium
Bars and bridges
LOCATOR
Ball abutments
Magnet
t Series of abutments M
Impression
Model
Temporary restorations
CAD/CAM Scan abutment
CAD/CAM Titanium base Zenotec
Ceramics
Precious metal
Titanium
Bars and bridges
LOCATOR
Ball abutments
Magnet
t Series of abutments L
Impression
Model
Temporary restorations
CAD/CAM Scan abutment
CAD/CAM Titanium base Zenotec
Ceramics
Precious metal
Titanium
Bars and bridges
LOCATOR
Ball abutments
Magnet
70
70
70
70
70
71
71
71
72
73
74
75
76 83
78
78
78
78
78
79
79
79
80
81
82
83
84 91
86
86
86
86
86
87
87
87
88
89
90
91
Index
Accessories
t Surgical accessories
94 95
t Alphabetical
124 127
96
t Numerical
128 131
t Prosthetic accessories
97
t Notes
132 133
t Training implants
98
Service
t Comprehensive service
102 103
t Information materials
104 106
Printed media
Models
t Forms
tioLogic implant planning
tioLogic surgery protocol
tioLogic practice record card
t Treatment examples
104 105
106
107 109
107
108
109
110 117
Technical data
t Material data
120 121
t Quality system
122 123
System concept
t The tioLogic concept
Easy handling
Product identification
12 17
14 15
16 17
18 27
18 19
20 21
22 23
24 25
26 27
10
System concept
System concept
11
System concept
The tioLogic concept
Service
An important building block within the concept
It speaks for itself that tioLogic hardware, the physically tangible parts of an implant system, must be convincing. This also applies to the
software, the accompanying support, and the advice from the provider. That is why Dentaurum Implants provide the attending dentist with
informative and comprehensive documentation, a large selection of further education courses and high quality materials for the patient.
You will find details on safety, aesthetics, and handling in the tioLogic SafetyPass.
mm
mm
30
12
Maximum safety
FEM optimized implant shape and thread geometry1
It is of fundamental importance for a modern implant system that its safety is convincingly proven and documented in both theory
and practice through recognised methods. The tioLogic implants outer geometry was developed in cooperation with Bonn University.
Their comprehensive FEM analyses1 prove the above-average results for peak strain and distortion levels. The areas thread design, thread
geometry, and implant form were examined separately.
Perfect aesthetics
FEM optimized2 and ISO proven long-term durability3
An increase in demands and higher life expectancy has significantly raised the quality of modern dental restorations. Implant borne
restorations are increasingly preferred to fixed/removable or tooth substance-challenging restorations. Also when considering improved
aesthetics. In this respect, it is important that implants and superstructures provide aesthetically perfect and long-term solutions. The
combination of cervical chamfer, crestal fine thread and CBS surface, which extends right to the cervical chamfer, promotes the apposition
of bone tissue, prevents bone collapse and reduces gingival recession. The inner geometry was developed using FEM analysis2, its stability
has been proven by long-term durability tests according to ISO3 at the Fraunhofer Institute.
Easy handling
Precondition for efficiency of work
Easy, safe and convenient handling of all parts is an important precondition for economical work with a modern implant system.
During conception of the tioLogic implant system, we put into practice some fundamental handling aspects such as colour-coding for
fast visualisation, laser markings, integrated depth stop, and simple-to-use packaging. The unique S-M-L system provides prosthetics with
convincing practice and laboratory related customisation possibilities and clarity.
Rahimi, F. Heinemann, A. Jger, C. Bourauel: Biomechanische Untersuchungen des Einflusses von Geometrievarianten des tioLogic
A.
Implantats (Biomechanical tests on the effects of different types of tioLogic implant geometry); Universitt Bonn 2006
F. O. Kumala: Analyse des tioLogic Implantats mittels FEM (Analysis of the tioLogic implant using FEM); CADFEM Stuttgart 2006
R. Schfer, R. Jaeger, D. Ulrich, U. Kster: Bestimmung der Ermdungsfestigkeit eines Dentalimplantats (Determination of the fatigue
strength of a dental implant); Fraunhofer Institut Werkstoffmechanik Freiburg 2006
DIN EN ISO 14801: 2003, Ermdungsprfung fr enossale dentale Implantate (Fatigue test for endosseous dental implants),
DIN Deutsches Institut fr Normung, Berlin
For detailed information on these studies, please refer to the tioLogic SafetyPass.
Conclusion
A convincing concept State of the art
13
System concept
Easy handling
The S-M-L concept includes aspects such as integrated platform focussing and offers new options for an individual, easy, cost-effective
technique with high reliability. The user has a choice of 5 implant diameters, 5 implant lengths and 3 prosthetic series of abutments.
Implant diameters
Series of abutments
S
M
L
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
The optimal grading of implant diameters and lengths ensures that the appropriate implant is used for the indication. Components
of the 3 series of abutments are made of plastic (temporaries), zirconia, titanium and precious metal and include bars, ball abutment,
LOCATOR and magnets. The construction components S are used for the implant diameter 3.3 mm, the construction components M
for the implant diameters 3.7 mm and 4.2 mm and the construction components L for the implant diameters 4.8 mm and 5.5 mm.
For exact identification all components are marked with S, M or L by laser.
3 series of abutments
for 5 implant diameters
S
3.3
3.7
4.2
4.8
5.5
14
Prosthetic
screw
3 series of
abutments
3.3
3.7
4.2
4.8
Implants
9.0 mm
11.0 mm
13.0 mm
15.0 mm
17.0 mm
15
5.5
System concept
Product identification
All information at a glance
43783
2
3
4
REF 383-042-15
43783
988-980-12
REF 383-042-15
All basic information needed by users and their assistants is on the label. These so-called sandwich labels allow fast and distinct
documentation in the Patient ID card. The pictograms are intuitive and conform to international standards, thus providing rapid and clear
flow of information. Further labels for the surgical protocol and patient ID card are also included.
REF 383-042-15
1 Stck/piece
2011-05
5
6
10
1 Contents
2 Diameter and length
3 Article number (REF)
4 Packing unit
5 Symbol for sterilisation by gamma radiation
6 Number of the notified body according to the
Medical Device Directive 93/42 EWG
7 Observe instructions
8 Single-use only
9 Sterility expiry date
10 Self-adhesive labels with item number (REF)
and lot number (LOT)
16
Colour-coded instruments
All diameter-oriented surgical instruments have coloured rings around the grip for precise diameter coding (not single patient instruments).
The colour coding is identical with that found on the implants.
Colour-coded implants
3 All components, ranging from closure screw, gingiva former to the impression and the prosthetic components, include the S-M-L laser
marking to allow allocation to the respective implant platform.
yellow
3.3brown
mm
3.7 mm
red
4.2 mm
17
blue
green
4.8 mm
5.5 mm
System overview
Overview surgical components
Marking drill
Marking drill
1.5 mm,
Surface cutter
Surface cutter
3.3 mm,
REF 382-033-00
Depth drills
Length 11.0 mm,REF 382-020-11
Length 13.0 mm,REF 382-020-13
Length 15.0 mm,REF 382-020-15
Length 17.0 mm,REF 382-020-17
Thread tap
3.3 mm,
18
REF 382-433-00
REF 382-015-00
Depth drills
Guide sleeves
Length 6.0 mm, REF 381-422-00
Length 10.0 mm, REF 381-420-00
Pilot drill
Length 17.0 mm,REF 382-014-17
Conical formers
Implant
Thread tap
Guide sleeves
Pre-Drills
Planning
Implant
Length 11.0 mm,REF 383-033-11
Length 13.0 mm,REF 383-033-13
Length 15.0 mm,REF 383-033-15
Length 17.0 mm,REF 383-033-17
open
Impression, S
Open impression, S
Length 10.0 mm, REF 385-110-00
Length 14.0 mm, REF 385-112-00
closed
conical, S
cylindrical, S
Temporary restoration, S
Temporary abutment, S
Gingival forming, S
Closed impression, S
Length 7.0 mm, REF 385-120-00
Temporary abutment, S
GH 3.0 mm,
REF 384-130-00
19
System overview
Marking drill
Marking drill
1.5 mm,
Surface cutter
Surface cutter
3.7 mm,
REF 382-037-00
Depth drills
Depth drills
Length 9.0 mm, REF 382-020-09
Length 11.0 mm, REF 382-020-11
Length 13.0 mm, REF 382-020-13
Length 15.0 mm, REF 382-020-15
Length 17.0 mm, REF 382-020-17
Thread tap
3.7 mm,
20
REF 382-015-00
REF 382-437-00
Guide sleeves
Length 6.0 mm, REF 381-422-00
Length 10.0 mm, REF 381-420-00
Pilot drill
Length 17.0 mm, REF 382-014-17
Conical formers
Implant
Thread tap
Guide sleeves
Pre-Drills
Planning
Implant
Length 9.0 mm, REF 383-037-09
Length 11.0 mm, REF 383-037-11
Length 13.0 mm, REF 383-037-13
Length 15.0 mm, REF 383-037-15
Length 17.0 mm, REF 383-037-17
Impression, M
open
Temporary abutment, M
conical, M
cylindrical, M
Temporary restoration, M
Open Impression, M
Length 10.0 mm, REF 385-210-00
Length 14.0 mm, REF 385-212-00
closed
M
Gingival forming, M
Closed impression, M
Length 7.0 mm, REF 385-220-00
Temporary abutment, M
GH 3.0 mm,
REF 384-230-00
21
System overview
Marking drill
Marking drill
1.5 mm,
Surface cutter
Surface cutter
4.2 mm,
REF 382-042-00
Depth drills
Depth drills
Length 9.0 mm, REF 382-020-09
Length 11.0 mm, REF 382-020-11
Length 13.0 mm, REF 382-020-13
Length 15.0 mm, REF 382-020-15
Length 17.0 mm, REF 382-020-17
Thread tap
4.2 mm,
22
REF 382-015-00
REF 382-442-00
Guide sleeves
Length 6.0 mm, REF 381-422-00
Length 10.0 mm, REF 381-420-00
Pilot drill
Length 17.0 mm, REF 382-014-17
Conical formers
Implant
Thread tap
Guide sleeves
Pre-Drills
Planning
Implant
Length 9.0 mm, REF 383-042-09
Length 11.0 mm, REF 383-042-11
Length 13.0 mm, REF 383-042-13
Length 15.0 mm, REF 383-042-15
Length 17.0 mm, REF 383-042-17
Impression, M
open
Temporary abutment, M
conical, M
cylindrical, M
Temporary restoration, M
Open impression, M
Length 10.0 mm, REF 385-210-00
Length 14.0 mm, REF 385-212-00
closed
M
Gingival forming, M
Closed impression, M
Length 7.0 mm, REF 385-220-00
Temporary abutment, M
GH 3.0 mm,
REF 384-230-00
23
System overview
Overview surgical components
Implants L 4.8 mm, series of abutments L
Rotary instruments,
reusable
Marking drill
Marking drill
1.5 mm,
Surface cutter
Surface cutter
4.8 mm,
REF 382-048-00
Depth drills
Guide sleeves
Length 6.0 mm, REF 381-422-00
Length 10.0 mm, REF 381-420-00
Pilot drill
Length 17.0 mm, REF 382-014-17
Depth drills
Length 9.0 mm, REF 382-020-09
Length 11.0 mm, REF 382-020-11
Length 13.0 mm, REF 382-020-13
Length 15.0 mm, REF 382-020-15
Length 17.0 mm, REF 382-020-17
Conical formers
Thread tap
4.8 mm,
24
REF 382-015-00
REF 382-448-00
Implant
Thread tap
Guide sleeves
Pre-Drills
Planning
Implant
Length 9.0 mm, REF 383-048-09
Length 11.0 mm, REF 383-048-11
Length 13.0 mm, REF 383-048-13
Length 15.0 mm, REF 383-048-15
Length 17.0 mm, REF 383-048-17
offene
Impression, L
Open impression, L
Length 10.0 mm, REF 385-310-00
Length 10.0 mm, REF 385-312-00
closed
conical, L
cylindrical, L
Temporary restoration, L
Temporary abutment, L
Gingival forming, L
Closed impression, L
Length 7.0 mm, REF 385-320-00
Temporary abutment, L
GH 3.0 mm,
REF 384-330-00
25
System overview
Overview surgical components
Implants L 5.5 mm, series of abutments L
Rotary instruments,
reusable
Marking drill
Marking drill
1.5 mm,
Surface cutter
Surface cutter
5.5 mm,
REF 382-055-00
Depth drills
Length 9.0 mm, REF 382-020-09
Length 11.0 mm, REF 382-020-11
Length 13.0 mm, REF 382-020-13
Length 15.0 mm, REF 382-020-15
Thread tap
5.5 mm,
26
REF 382-455-00
REF 382-015-00
Depth drills
Guide sleeves
Length 6.0 mm, REF 381-422-00
Length 10.0 mm, REF 381-420-00
Pilot drill
Length 17.0 mm, REF 382-014-17
Conical formers
Implant
Thread tap
Guide sleeves
Pre-Drills
Planning
Implant
Length 9.0 mm, REF 383-055-09
Length 11.0 mm, REF 383-055-11
Length 13.0 mm, REF 383-055-13
Length 15.0 mm, REF 383-055-15
open
Impression, L
Open impression, L
Length 10.0 mm, REF 385-310-00
Length 14.0 mm, REF 385-312-00
closed
conical, L
cylindrical, L
Temporary restoration, L
Temporary abutment, L
Gingival forming, L
Closed impression, L
Length 7.0 mm, REF 385-320-00
Temporary abutment, L
GH 3.0 mm,
REF 384-330-00
27
Surgery
t Planning and diagnosis
30 31
X-ray templates
Planning aids
30
31
32 36
32 33
34
34
34
35
36
36
t tioLogic pOsition
40 41
Basic sleeve
Drill for basic sleeve
Holder for basic sleeve
Arrow pins for basic sleeves
Inner sleeve
Holder for inner sleeve
Cleaning needle
40
40
40
41
41
41
41
t tioLogic pOsition
rotary instruments
42 44
Gingiva cutter
Depth drills
Stepped countersink
Expander
Thread tap
t Trays
tioLogic easyClean surgical tray
tioLogic surgical tray
tioLogic pOsition surgical tray
tioLogic instrument tray
Osteotome Tray
TIOSET instrument tray
42
42
43
44
44
46 59
46 47
48 49
50 51
52 53
54 56
58 59
60
t Implants
61
t Gingiva formers
Conical
Cylindrical
62 63
62
63
28
Surgery
Surgery
29
Surgery
Planning and diagnosis
t X-ray templates
Planning foil
Scale
1:1 / 1.25:1
t Planungsfolie
fr tioLogic Implantate
t Planning foil
for tioLogic Implants
1:1
t Lmina de planificacin
1,25 : 1
L 9 mm
L 9 mm
L 11 mm
L 11 mm
L 13 mm
L 13 mm
L 15 mm
L 15 mm
L 17 mm
L 17 mm
381-410-00 09/07
REF 381-410-00
381-410-00_381-412-00_Rontgenschablonen_SW_0907.indd 1
Planning foil
t Planungsfolie
fr tioLogic Implantate
t Lmina de planificacin
t Planning foil
1:1
Scale
1:1 / 1.4:1
1,4 : 1
L 9 mm
L 9 mm
L 11 mm
L 11 mm
L 13 mm
L 13 mm
L 15 mm
L 15 mm
L 17 mm
L 17 mm
381-412-00 09/07
REF 381-412-00
381-410-00_381-412-00_Rontgenschablonen_SW_0907.indd 2
30
Surgery
Planning and diagnosis
t Planning aids
REF 330-560-00
5.0 mm
REF 381-420-00
inner 2.0 mm
L 10.0 mm
REF 381-422-00
inner 2.0 mm
L 6.0 mm
REF 381-424-00
Pre-Drill
for guide sleeve L 10.0 mm,
resterilizable
2.0 mm
L 21.0 mm
REF 381-426-00
Pre-Drill
for guide sleeve L 6.0 mm,
resterilizable
2.0 mm
L 17.0 mm
REF 381-428-00
shank 2.35 mm
31
Surgery
tioLogic rotary instruments
Overview
Marking drill
Surface cutters
Depth drills
Conical formers
Thread taps
32
Marking drill
Surface cutter
Depth drill
Thread tap
33
Surgery
Rotary instruments
t Pre-Drills, resterilizable
REF 382-015-00
Marking drill
1.5 mm
REF 382-014-17
Pilot drill1, 2
1.4 mm
L 17.0 mm
Surface cutter S
3.3 mm
REF 382-037-00
Surface cutter M
3.7 mm
REF 382-042-00
Surface cutter M
4.2 mm
REF 382-048-00
Surface cutter L
4.8 mm
REF 382-055-00
Surface cutter L
5.5 mm
REF 382-020-09
Depth drill
2.0 mm
L 9.0 mm
REF 382-020-11
Depth drill
2.0 mm
L 11.0 mm
REF 382-020-13
Depth drill
2.0 mm
L 13.0 mm
REF 382-020-15
Depth drill
2.0 mm
L 15.0 mm
REF 382-020-17
Depth drill
2.0 mm
L 17.0 mm
F or technical reasons the instruments are 1.0 mm longer than the given preparation length.
No integral depth stop for insertion lengths 9.0/11.0/13.0/15.0 mm.
34
Surgery
Rotary instruments
t Conical formers, resterilizable1
REF 382-033-11
Conical former S
3.3 mm
L 11.0 mm
REF 382-033-13
Conical former S
3.3 mm
L 13.0 mm
REF 382-033-15
Conical former S
3.3 mm
L 15.0 mm
REF 382-033-17
Conical former S
3.3 mm
L 17.0 mm
REF 382-037-09
Conical former M
3.7 mm
L 9.0 mm
REF 382-037-11
Conical former M
3.7 mm
L 11.0 mm
REF 382-037-13
Conical former M
3.7 mm
L 13.0 mm
REF 382-037-15
Conical former M
3.7 mm
L 15.0 mm
REF 382-037-17
Conical former M
3.7 mm
L 17.0 mm
REF 382-042-09
Conical former M
4.2 mm
L 9.0 mm
REF 382-042-11
Conical former M
4.2 mm
L 11.0 mm
REF 382-042-13
Conical former M
4.2 mm
L 13.0 mm
REF 382-042-15
Conical former M
4.2 mm
L 15.0 mm
REF 382-042-17
Conical former M
4.2 mm
L 17.0 mm
REF 382-048-09
Conical former L
4.8 mm
L 9.0 mm
REF 382-048-11
Conical former L
4.8 mm
L 11.0 mm
REF 382-048-13
Conical former L
4.8 mm
L 13.0 mm
REF 382-048-15
Conical former L
4.8 mm
L 15.0 mm
REF 382-048-17
Conical former L
4.8 mm
L 17.0 mm
REF 382-055-09
Conical former L
5.5 mm
L 9.0 mm
REF 382-055-11
Conical former L
5.5 mm
L 11.0 mm
REF 382-055-13
Conical former L
5.5 mm
L 13.0 mm
REF 382-055-15
Conical former L
5.5 mm
L 15.0 mm
35
Surgery
Rotary instruments
t Conical formers (dense bone), resterilizable2
REF 382-233-17
3.3 mm
L 17.0 mm
REF 382-237-17
3.7 mm
L 17.0 mm
REF 382-242-17
4.2 mm
L 17.0 mm
REF 382-248-17
4.8 mm
L 17.0 mm
REF 382-255-17
5.5 mm
L 17.0 mm
REF 382-433-00
Thread tap S
3.3 mm
REF 382-437-00
Thread tap M
3.7 mm
REF 382-442-00
Thread tap M
4.2 mm
REF 382-448-00
Thread tap L
4.8 mm
REF 382-455-00
Thread tap L
5.5 mm
F or technical reasons the instruments are 1.0 mm longer than the given preparation length.
No integral depth stop for insertion lengths 9.0/11.0/13.0/15.0 mm.
SP: single patient
4
No integral depth stop
1
2
3
36
Surgery
Depth scale
17.0 mm
15.0 mm
13.0 mm
11.0 mm
9.0 mm
37
38
Navigation
Surgery
39
Surgery
tioLogic pOsition Planning and accessories
t Basic sleeves
REF 381-533-00
Basic sleeve S
3.3 mm
REF 381-537-00
Basic sleeve M
3.7 mm
REF 381-542-00
Basic sleeve M
4.2 mm
REF 381-548-00
Basic sleeve L
4.8 mm
REF 381-555-00
Basic sleeve L
5.5 mm
REF 381-133-00
3.3 mm
REF 381-137-00
3.7 mm
REF 381-142-00
4.2 mm
REF 381-148-00
4.8 mm
REF 381-155-00
5.5 mm
REF 381-233-00
3.3 mm
REF 381-237-00
3.7 mm
REF 381-242-00
4.2 mm
REF 381-248-00
4.8 mm
REF 381-255-00
5.5 mm
40
Surgery
tioLogic pOsition Planning and accessories
t Arrow pins for basic sleeve med3D
REF 381-733-00
3.3 mm
REF 381-737-00
3.7 mm
REF 381-742-00
4.2 mm
REF 381-748-00
4.8 mm
REF 381-755-00
5.5 mm
REF 381-333-00
3.3 mm
REF 381-337-00
3.7 mm
REF 381-342-00
4.2 mm
REF 381-348-00
4.8 mm
REF 381-355-00
5.5 mm
t Inner sleeves
t Cleaning needle
REF 387-530-00
Cleaning needle
41
Surgery
tioLogic pOsition Rotary instruments1
t Gingiva cutter
REF 382-333-00
Gingiva cutter
pOsition S
3.3 mm
REF 382-337-00
Gingiva cutter
pOsition M
3.7 mm
REF 382-342-00
Gingiva cutter
pOsition M
4.2 mm
REF 382-348-00
Gingiva cutter
pOsition L
4.8 mm
REF 382-355-00
Gingiva cutter
pOsition L
5.5 mm
REF 382-320-09
2.0 mm
L 9.0 mm
REF 382-320-11
2.0 mm
L 11.0 mm
REF 382-320-13
2.0 mm
L 13.0 mm
REF 382-320-15
2.0 mm
L 15.0 mm
t Depth drill
42
Surgery
tioLogic pOsition Rotary instruments1
t Stepped countersink
REF 382-333-11
Stepped countersink
pOsition S
3.3 mm
L 11.0 mm
REF 382-333-13
Stepped countersink
pOsition S
3.3 mm
L 13.0 mm
REF 382-333-15
Stepped countersink
pOsition S
3.3 mm
L 15.0 mm
REF 382-337-09
Stepped countersink
pOsition M
3.7 mm
L 9.0 mm
REF 382-337-11
Stepped countersinkr
pOsition M
3.7 mm
L 11.0 mm
REF 382-337-13
Stepped countersink
pOsition M
3.7 mm
L 13.0 mm
REF 382-337-15
Stepped countersink
pOsition M
3.7 mm
L 15.0 mm
REF 382-342-09
Stepped countersink
pOsition M
4.2 mm
L 9.0 mm
REF 382-342-11
Stepped countersink
pOsition M
4.2 mm
L 11.0 mm
REF 382-342-13
Stepped countersink
pOsition M
4.2 mm
L 13.0 mm
REF 382-342-15
Stepped countersink
pOsition M
4.2 mm
L 15.0 mm
REF 382-348-09
Stepped countersink
pOsition L
4.8 mm
L 9.0 mm
REF 382-348-11
Stepped countersink
pOsition L
4.8 mm
L 11.0 mm
REF 382-348-13
Stepped countersink
pOsition L
4.8 mm
L 13.0 mm
REF 382-348-15
Stepped countersink
pOsition L
4.8 mm
L 15.0 mm
REF 382-355-09
Stepped countersink
pOsition L
5.5 mm
L 9.0 mm
REF 382-355-11
Stepped countersink
pOsition L
5.5 mm
L 11.0 mm
REF 382-355-13
Stepped countersink
pOsition L
5.5 mm
L 13.0 mm
REF 382-355-15
Stepped countersink
pOsition L
5.5 mm
L 15.0 mm
43
Surgery
tioLogic pOsition Rotary instruments1
t Expander
REF 382-533-00
Expander pOsition S
3.3 mm
REF 382-537-00
Expander pOsition M
3.7 mm
REF 382-542-00
Expander pOsition M
4.2 mm
REF 382-548-00
Expander pOsition L
4.8 mm
REF 382-555-00
Expander pOsition L
5.5 mm
REF 382-833-00
Thread tap
pOsition S
3.3 mm
REF 382-837-00
Thread tap
pOsition M
3.7 mm
REF 382-842-00
Thread tap
pOsition M
4.2 mm
REF 382-848-00
Thread tap
pOsition L
4.8 mm
REF 382-855-00
Thread tap
pOsition L
5.5 mm
t Thread tap
44
Surgery
45
Surgery
Trays
t Implantology
REF 387-418-00
tioLogic easyClean
surgical tray
REF 387-419-00
tioLogic easyClean
(without contents)
REF 387-412-00
REF 387-413-00
Indicator tag
REF 387-415-00
world innovation
46
Surgery
t
Tray content:
REF 382-015-00
REF 382-033-00
REF 382-037-00
REF 382-042-00
REF 382-048-00
REF 382-055-00
REF 382-020-09
REF 382-020-11
REF 382-020-13
REF 382-020-15
REF 382-020-17
REF 382-037-09
REF 382-042-09
REF 382-048-09
REF 382-055-09
REF 382-033-11
REF 382-037-11
REF 382-042-11
REF 382-048-11
REF 382-055-11
REF 382-033-13
REF 382-037-13
REF 382-042-13
REF 382-048-13
REF 382-055-13
REF 382-033-15
REF 382-037-15
REF 382-042-15
REF 382-048-15
REF 382-055-15
REF 382-033-17
REF 382-037-17
REF 382-042-17
Marking drill
REF 382-048-17
REF 382-433-00
REF 382-437-00
REF 382-442-00
REF 382-448-00
REF 382-455-00
Depth drill
REF 382-233-17
Depth drill
REF 382-237-17
Depth drill
REF 382-242-17
Depth drill
REF 382-248-17
Depth drill
REF 382-255-17
REF 387-600-00
Torque ratchet
REF 387-602-00
Sure-grip wheel
REF 387-604-00
REF 387-610-00
REF 387-612-00
REF 387-516-00
REF 387-518-00
REF 387-620-00
REF 387-622-00
REF 387-520-00
REF 387-522-00
REF 387-510-00
REF 387-511-00
REF 387-514-00
REF 387-523-00
REF 387-524-00
REF 387-525-00
REF 387-640-00
REF 387-660-00
REF 387-415-00
1.5 mm
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
47
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
Paralleling pin
Silicone o-ring
10 pieces
Surgery
Trays
t Implantology
REF 387-410-00
REF 387-412-00
REF 387-413-00
Indicator tag
with adhesive backing
REF 387-415-00
Silicone o-ring
10 pieces
48
Surgery
t
Tray content:
REF 382-015-00
REF 382-033-00
REF 382-037-00
REF 382-042-00
REF 382-048-00
REF 382-055-00
REF 382-020-09
REF 382-020-11
REF 382-020-13
REF 382-020-15
REF 382-020-17
REF 382-037-09
REF 382-042-09
REF 382-048-09
REF 382-055-09
REF 382-033-11
REF 382-037-11
REF 382-042-11
REF 382-048-11
REF 382-055-11
REF 382-033-13
REF 382-037-13
REF 382-042-13
REF 382-048-13
REF 382-055-13
REF 382-033-15
REF 382-037-15
REF 382-042-15
REF 382-048-15
REF 382-055-15
REF 382-033-17
REF 382-037-17
REF 382-042-17
Marking drill
REF 382-048-17
REF 382-433-00
REF 382-437-00
REF 382-442-00
REF 382-448-00
REF 382-455-00
Depth drill
REF 382-233-17
Depth drill
REF 382-237-17
Depth drill
REF 382-242-17
Depth drill
REF 382-248-17
Depth drill
REF 382-255-17
REF 387-600-00
Torque ratchet
REF 387-602-00
Sure-grip wheel
REF 387-604-00
REF 387-610-00
REF 387-612-00
REF 387-516-00
REF 387-518-00
REF 387-620-00
REF 387-622-00
REF 387-519-00
REF 387-520-00
REF 387-522-00
REF 387-510-00
REF 387-511-00
REF 387-514-00
REF 387-523-00
REF 387-524-00
REF 387-525-00
REF 387-640-00
REF 387-660-00
REF 387-415-00
1.5 mm
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
49
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
Paralleling pin
Silicone o-ring
10 pieces
Surgery
Trays
t Implantology
REF 387-420-00
tioLogic pOsition
Surgical Tray
REF 387-412-00
REF 387-413-00
Indicator tag
with adhesive bridges
REF 387-415-00
Silicone O-ring
10 pieces
50
Surgery
t
Tray content:
REF 387-600-00
Torque ratchet
REF 382-555-00
Expander pOsition L
REF 387-604-00
REF 382-833-00
REF 382-333-00
REF 382-837-00
REF 382-842-00
REF 382-848-00
REF 382-855-00
REF 387-602-00
REF 381-333-00
REF 381-337-00
REF 381-342-00
REF 381-348-00
REF 381-355-00
REF 381-500-00
REF 387-610-00
REF 387-612-00
REF 387-516-00
REF 387-518-00
REF 387-620-00
REF 387-622-00
REF 387-519-00
REF 387-520-00
REF 387-522-00
REF 387-510-00
REF 387-511-00
REF 387-514-00
REF 387-523-00
REF 387-524-00
REF 387-525-00
REF 387-640-00
REF 387-660-00
Expander pOsition S
REF 387-415-00
REF 382-337-00
REF 382-342-00
REF 382-348-00
REF 382-355-00
REF 382-320-09
REF 382-320-11
REF 382-320-13
REF 382-320-15
REF 382-333-11
REF 382-333-13
REF 382-333-15
REF 382-337-09
REF 382-337-11
REF 382-337-13
REF 382-337-15
REF 382-342-09
REF 382-342-11
REF 382-342-13
REF 382-342-15
REF 382-348-09
REF 382-348-11
REF 382-348-13
REF 382-348-15
REF 382-355-09
REF 382-355-11
REF 382-355-13
REF 382-355-15
REF 382-533-00
REF 382-537-00
REF 382-542-00
REF 382-548-00
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
Expander pOsition M
3.7 mm
Expander pOsition M
4.2 mm
Expander pOsition L
4.8 mm
51
5.5 mm
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
Sure-grip wheel
Set inner sleeve S
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
3 pieces
Paralleling pin
Silicone o-ring
10 pieces
Surgery
Trays
t Implantology
REF 387-414-00
52
Surgery
t
Tray content:
REF 387-600-00
Torque ratchet
REF 387-602-00
Sure-grip wheel
REF 387-604-00
REF 387-610-00
REF 387-612-00
REF 387-516-00
REF 387-518-00
REF 387-620-00
REF 387-622-00
REF 387-519-00
REF 387-520-00
REF 387-522-00
REF 387-510-00
REF 387-511-00
REF 387-514-00
Paralleling pin
REF 387-523-00
REF 387-524-00
REF 387-525-00
REF 387-640-00
REF 387-660-00
REF 387-415-00
Silicone o-ring
10 pieces
53
Surgery
Trays
t Osteotome
REF 350-102-00
Osteotome tray
54
Surgery
t
Tray content:
REF 350-105-00
OsteotomicHold
REF 350-140-00
Osteotome
convex, straight
2.4 mm
REF 350-141-00
Osteotome
convex, straight
3.1 mm
REF 350-142-00
Osteotome
convex, straight
3.7 mm
REF 350-143-00
Osteotome
convex, straight
4.2 mm
REF 350-145-00
Osteotome
convex, angled
2.4 mm
REF 350-146-00
Osteotome
convex, angled
3.1 mm
REF 350-147-00
Osteotome
convex, angled
3.7 mm
REF 350-148-00
Osteotome
convex, angled
4.2 mm
REF 350-160-00
Bone chisel
4.0 mm
REF 350-161-00
Bone chisel
6.0 mm
55
Surgery
t Osteotome/Single items
REF 350-106-00
Surgical mallet
REF 350-105-00
OsteotomicHold
REF 350-140-00
Osteotome
convex, straight
2.4 mm
REF 350-141-00
Osteotome
convex, straight
3.1 mm
REF 350-142-00
Osteotome
convex, straight
3.7 mm
REF 350-143-00
Osteotome
convex, straight
4.2 mm
REF 350-145-00
Osteotome
convex, angled
2.4 mm
REF 350-146-00
Osteotome
convex, angled
3.1 mm
REF 350-147-00
Osteotome
convex, angled
3.7 mm
REF 350-148-00
Osteotome
convex, angled
4.2 mm
REF 350-150-00
Osteotome
concave, straight
2.4 mm
REF 350-151-00
Osteotome
concave, straight
3.1 mm
REF 350-152-00
Osteotome
concave, straight
3.7 mm
REF 350-153-00
Osteotome
concave, straight
4.2 mm
REF 350-155-00
Osteotome
concave, angled
2.4 mm
REF 350-156-00
Osteotome
concave, angled
3.1 mm
REF 350-157-00
Osteotome
concave, angled
3.7 mm
REF 350-158-00
Osteotome
concave, angled
4.2 mm
REF 350-160-00
Bone chisel
4.0 mm
REF 350-161-00
Bone chisel
6.0 mm
56
Surgery
57
Surgery
Trays
t Instruments
REF 350-010-00
58
Surgery
t
Tray content:
Dental mirror
2 pieces
Dental probe
Exchangeable attachment.
Periodontal measuring
modified
Dental tweezers
Slimline.
Tissue forceps
Special serrations (very small and slender) hold the tissue flap
securely and atraumatically.
Scraper
For removing soft tissue debris and for smoothing edges of bone.
Sharp curette
For removing soft tissue debris (e.g. from the alveolus) and grafting
bone material.
Ball-end plugger
Double retractor
Raspatory
broad
Raspatory
narrow
Micro-scissors
Needle holder
La Grange scissors
Drill block
59
Surgery
Bone augmentation material
t NanoBone grain size 0.6 x 2.0 mm
REF 360-600-00
NanoBone granulate
Contents 1 x 0.6 ml
REF 360-602-00
NanoBone granulate
Contents 5 x 0.6 ml
REF 360-604-00
NanoBone granulate
Contents 1 x 1.2 ml
REF 360-606-00
NanoBone granulate
Contents 5 x 1.2 ml
REF 360-608-00
NanoBone granulate
Contents 1 x 2.4 ml
REF 360-610-00
NanoBone granulate
Contents 5 x 2.4 ml
REF 360-612-00
NanoBone granulate
Contents 1 x 1.2 ml
REF 360-614-00
NanoBone granulate
Contents 5 x 1.2 ml
REF 360-616-00
NanoBone granulate
Contents 1 x 2.4 ml
REF 360-618-00
NanoBone granulate
Contents 5 x 2.4 ml
REF 360-622-00
NanoBone block
REF 360-300-00
2-hole Microplate,
titanium
REF 360-280-00
t NanoBone block
60
1.5 x 11.0 mm
Surgery
tioLogic implants
t 3.3 mm S
REF 383-033-11
REF 383-033-13
REF 383-033-15
REF 383-033-17
S
M
tioLogic implant S
3.3 mm
L 11.0 mm
tioLogic implant S
3.3 mm
L 13.0 mm
tioLogic implant S
3.3 mm
L 15.0 mm
tioLogic implant S
3.3 mm
L 17.0 mm
tioLogic implant M
3.7 mm
L 9.0 mm
tioLogic implant M
3.7 mm
L 11.0 mm
tioLogic implant M
3.7 mm
L 13.0 mm
tioLogic implant M
3.7 mm
L 15.0 mm
tioLogic implant M
3.7 mm
L 17.0 mm
tioLogic implant M
4.2 mm
L 9.0 mm
tioLogic implant M
4.2 mm
L 11.0 mm
tioLogic implant M
4.2 mm
L 13.0 mm
tioLogic implant M
4.2 mm
L 15.0 mm
tioLogic implant M
4.2 mm
L 17.0 mm
t 3.7 mm M
REF 383-037-09
REF 383-037-11
REF 383-037-13
REF 383-037-15
REF 383-037-17
t 4.2 mm M
REF 383-042-09
REF 383-042-11
REF 383-042-13
REF 383-042-15
REF 383-042-17
t 4.8 mm L
REF 383-048-09
tioLogic implant L
4.8 mm
L 9.0 mm
REF 383-048-11
tioLogic implant L
4.8 mm
L 11.0 mm
REF 383-048-13
tioLogic implant L
4.8 mm
L 13.0 mm
REF 383-048-15
tioLogic implant L
4.8 mm
L 15.0 mm
REF 383-048-17
tioLogic implant L
4.8 mm
L 17.0 mm
t 5.5 mm L
REF 383-055-09
tioLogic implant L
5.5 mm
L 9.0 mm
REF 383-055-11
tioLogic implant L
5.5 mm
L 11.0 mm
REF 383-055-13
tioLogic implant L
5.5 mm
L 13.0 mm
REF 383-055-15
tioLogic implant L
5.5 mm
L 15.0 mm
61
Surgery
Gingiva formers
t conical
REF 384-110-00
REF 384-112-00
REF 384-114-00
REF 384-116-00
REF 384-210-00
REF 384-212-00
REF 384-214-00
REF 384-216-00
REF 384-310-00
REF 384-312-00
REF 384-314-00
REF 384-316-00
S
M
L
Gingiva former S
conical
GH 1.5 mm
Gingiva former S
conical
GH 3.0 mm
Gingiva former S
conical
GH 4.5 mm
Gingiva former S
conical
GH 6.0 mm
Gingiva former M
conical
GH 1.5 mm
Gingiva former M
conical
GH 3.0 mm
Gingiva former M
conical
GH 4.5 mm
Gingiva former M
conical
GH 6.0 mm
Gingiva former L
conical
GH 1.5 mm
Gingiva former L
conical
GH 3.0 mm
Gingiva former L
conical
GH 4.5 mm
Gingiva former L
conical
GH 6.0 mm
62
Surgery
Gingiva formers
t cylindrical
REF 384-120-00
REF 384-122-00
REF 384-124-00
REF 384-126-00
REF 384-220-00
REF 384-222-00
REF 384-224-00
REF 384-226-00
REF 384-320-00
REF 384-322-00
REF 384-324-00
REF 384-326-00
S
M
L
Gingiva former S
cylindrical
GH 1.5 mm
Gingiva former S
cylindrical
GH 3.0 mm
Gingiva former S
cylindrical
GH 4.5 mm
Gingiva former S
cylindrical
GH 6.0 mm
Gingiva former M
cylindrical
GH 1.5 mm
Gingiva former M
cylindrical
GH 3.0 mm
Gingiva former M
cylindrical
GH 4.5 mm
Gingiva former M
cylindrical
GH 6.0 mm
Gingiva former L
cylindrical
GH 1.5 mm
Gingiva former L
cylindrical
GH 3.0 mm
Gingiva former L
cylindrical
GH 4.5 mm
Gingiva former L
cylindrical
GH 6.0 mm
63
Prosthetics
t The S-M-L concept
66 67
t Series of abutments S
68 75
Impression
Model
Temporary restorations
CAD/CAM Scan abutment
CAD/CAM Titanium base Zenotec
Ceramics
Precious metal
Titanium
Bars and bridges
LOCATOR
Ball abutments
Magnet
t Series of abutments M
Impression
Model
Temporary restorations
CAD/CAM Scan abutment
CAD/CAM Titanium base Zenotec
Ceramics
Precious metal
Titanium
Bars and bridges
LOCATOR
Ball abutments
Magnet
t Series of abutments L
Impression
Model
Temporary restorations
CAD/CAM Scan abutment
CAD/CAM Titanium base Zenotec
Ceramics
Precious metal
Titanium
Bars and bridges
LOCATOR
Ball abutments
Magnet
70
70
70
70
70
71
71
71
72
73
74
75
76 83
78
78
78
78
78
79
79
79
80
81
82
83
84 91
86
86
86
86
86
87
87
87
88
89
90
91
Prosthetics
Prosthetic components
64
Prosthetics
Prosthetics
65
Prosthetics
Easy handling
The user has a choice of 5 implant diameters, 5 implant lengths and 3 series of abutments (S-M-L concept).
Implant diameters
Series of abutments
S
M
L
3.3 mm
3.7 mm
4.2 mm
4.8 mm
5.5 mm
The optimal grading of implant diameters and lengths ensures that the appropriate implant is used for the indication. Components of
the 3 series of abutments are made of plastic (temporaries), zirconia, titanium and precious metal and include, bars, ball abutment,
LOCATOR and magnets. The construction components S are used for the implant diameter 3.3 mm, the construction components M
for the implant diameters 3.7 mm and 4.2 mm and the construction components L for the implant diameters 4.8 mm and 5.5 mm.
For exact identification all components are marked with S, M or L by laser.
3 series of abutments
for 5 implant diameters
S
3.3
3.7
4.2
4.8
5.5
66
Prosthetic
screw
3 series of
abutments
3.3
3.7
4.2
4.8
Implants
9.0 mm
11.0 mm
13.0 mm
15.0 mm
17.0 mm
67
5.5
Series of abutments S
3.3
3.7
4.2
4.8
5.5
68
Series of abutments S
Prosthetics
69
Prosthetics
Components series of abutments S
t Impression
REF 385-110-00
REF 385-112-00
REF 385-910-00
REF 385-912-00
REF 385-120-00
REF 385-122-00
REF 385-123-00
REF 385-124-00
Screw
for impression post, open, L 10.0 mm
Screw
for impression post, open, L 14.0 mm
Impression post S,
closed
incl. impression cap S,
bite registration cap S and screw
Impression cap S
5 pieces
Positioning aid S
for impression post S, closed
L 10.0 mm
L 14.0 mm
M 1.6
L 16.0 mm
M 1.6
L 25.0 mm
L 7.0 mm
L 6.0 mm
L 6.0 mm
L 9.6 mm
t Model
REF 385-130-00
Laboratory implant S
L 12.0 mm
Temporary abutment S
GH 3.0 mm
L 12.0 mm
t Temporary restorations
REF 384-130-00
REF 384-910-00
incl. screw
Screw
for temporary abutment
M 1.6
L 13.5 mm
Scan abutment S,
customizable,
incl. AnoTite screw
Titanium cap S,
Zenotec, Wieland, incl. AnoTite screw
70
Prosthetics
Components series of abutments S
t Ceramics
REF 386-110-00
REF 386-111-00
REF 386-113-00
Ceramic abutment S
incl. AnoTite screw
Ceramic abutment S
incl. AnoTite screw
GH 3.0 mm
L 9.6 mm
GH 2.0 mm
L 9.6 mm, 15
Titanium base
ceramic abutment S
incl. AnoTite screw
REF 386-910-00
REF 386-914-00
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
M 1.6
L 9.0 mm
t Precious metal
REF 386-115-00
REF 386-910-00
REF 386-914-00
L 12.0 mm
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
M 1.6
L 9.0 mm
t Titanium
REF 386-130-00
REF 386-131-00
REF 386-132-00
REF 386-135-00
REF 386-136-00
REF 386-139-00
REF 386-910-00
REF 386-914-00
Titanium abutment S
incl. AnoTite screw
Titanium abutment S
incl. AnoTite screw
Titanium abutment S
incl. AnoTite screw
Titanium abutment S
incl. AnoTite screw
Titanium abutment S
incl. AnoTite screw
GH 2.5 mm
L 8.5 mm
GH 4.0 mm
L 10.0 mm
GH 1.5 mm
L 9.0 mm, 15
GH 3.0 mm
L 10.5 mm, 15
GH 2.5 mm
L 12.0 mm
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
71
GH 1.0 mm
L 7.0 mm
M 1.6
L 9.0 mm
Prosthetics
Components series of abutments S
t Bars and bridges
REF 386-140-00
Bar abutment S
GH 1.0 mm
REF 386-141-00
Bar abutment S
GH 2.5 mm
REF 386-142-00
Bar abutment S
GH 4.0 mm
REF 386-143-00
Bar abutment S
GH 5.5 mm
REF 386-410-00
L 3.3 mm
REF 386-412-00
L 10.0 mm
REF 386-414-00
M 1.6
L 21.0 mm
REF 386-416-00
L 12.0 mm
REF 386-418-00
REF 386-420-00
REF 386-422-00
REF 386-426-00
L 12.0 mm
L 12.0 mm
L 4.5 mm
L 4.5 mm
REF 386-430-00
L 10.8 mm
REF 386-444-00
L 50.0 mm
REF 386-446-00
L 50.0 mm
REF 330-770-00
L 40.0 mm
B 2.1 mm
H 3.0 mm
REF 330-772-00
L 40.0 mm
REF 386-912-00
REF 386-916-00
AnoTite screw
bar abutment
72
M 1.6
L 6.0 mm
M 1.6
L 6.0 mm
Prosthetics
Components series of abutments S
t LOCATOR
REF 386-151-00
LOCATOR abutment S
GH 1.0 mm
REF 386-152-00
LOCATOR abutment S
GH 2.0 mm
REF 386-153-00
LOCATOR abutment S
GH 3.0 mm
REF 386-154-00
LOCATOR abutment S
GH 4.0 mm
REF 386-155-00
LOCATOR abutment S
GH 5.0 mm
REF 386-512-00
REF 386-514-00
L 4.0 mm
4.0 mm
L 10.0 mm
REF 386-518-00
REF 386-520-00
REF 386-522-00
REF 386-524-00
REF 386-530-00
REF 386-534-00
73
black
transparent, 010
medium 2.270 g
pink, 010
low 1.365 g
blue, 010
very low 680 g
white
L 8.0 mm
Prosthetics
Components series of abutments S
t Ball abutment
REF 386-160-00
Ball abutment S
GH 1.5 mm
Ball abutment 2.25 mm
REF 386-161-00
Ball abutment S
GH 3.0 mm
Ball abutment 2.25 mm
REF 386-162-00
Ball abutment S
GH 4.5 mm
Ball abutment 2.25 mm
REF 386-614-00
Laboratory implant,
ball abutment
REF 386-617-00
red
high, approx. 1.200 g
REF 386-616-00
green
standard, approx. 800 g
REF 386-620-00
red
high, approx. 1.200 g
REF 386-618-00
green
standard, approx. 800 g
REF 386-619-00
yellow
low, approx. 600 g
REF 386-622-00
REF 386-624-00
REF 386-626-00
74
Prosthetics
Components series of abutments S
t Magnet
REF 386-170-00
Steco Titanmagnetics
insert S x-Line
GH 3.0 mm
REF 386-171-00
Steco Titanmagnetics
insert S x-Line
GH 4.5 mm
REF 386-712-00
Steco Titanmagnetics
impression post x-Line
L 7.0 mm
REF 386-714-00
Steco Titanmagnetics
laboratory implant x-Line
L 9.0 mm
REF 386-716-00
Steco dentures
Titanmagnetics x-Line
L 2.6 mm
REF 386-718-00
REF 386-720-00
75
Series of abutments M
3.3
3.7
4.2
4.8
5.5
76
Series of abutments M
Prosthetics
77
Prosthetics
Components series of abutments M
t Impression
REF 385-210-00
REF 385-212-00
REF 385-910-00
REF 385-912-00
REF 385-220-00
REF 385-222-00
REF 385-223-00
REF 385-224-00
Screw
for impression post, open, L 10.0 mm
Screw
for impression post, open, L 14.0 mm
Impression cap M
5 caps
Positioning aid M
for impression post M, closed
L 10.0 mm
L 14.0 mm
M 1.6
L 16.0 mm
M 1.6
L 25.0 mm
L 7.0 mm
L 6.0 mm
L 6.0 mm
L 9.6 mm
t Model
REF 385-230-00
Laboratory implant M
L 12.0 mm
REF 384-230-00
Temporary abutment M
GH 3.0 mm
L 12.0 mm
REF 384-910-00
Screw
t Temporary restorations
incl. screw
M 1.6
L 13.5 mm
Scan abutment M,
costumizable,
incl. AnoTite screw
Titanium cap M,
Zenotec, Wieland, incl. AnoTite screw
78
Prosthetics
Components series of abutments M
t Ceramics
REF 386-210-00
REF 386-211-00
REF 386-213-00
Ceramic abutment M
incl. AnoTite screw
Ceramic abutment M
incl. AnoTite screw
GH 3.0 mm
L 9.6 mm
GH 2.0 mm
L 9.6 mm, 15
Titanium base
ceramic abutment M
incl. AnoTite screw
REF 386-910-00
REF 386-914-00
M 1.6
L 9.0 mm
AnoTite screw
M 1.6
L 9.0 mm
L 12.0 mm
t Precious metal
REF 386-215-00
REF 386-910-00
REF 386-914-00
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
M 1.6
L 9.0 mm
t Titanium
REF 386-230-00
REF 386-231-00
REF 386-232-00
REF 386-235-00
REF 386-236-00
REF 386-239-00
REF 386-910-00
REF 386-914-00
Titanium abutment M
incl. AnoTite screw
Titanium abutment M
incl. AnoTite screw
Titanium abutment M
incl. AnoTite screw
Titanium abutment M
incl. AnoTite screw
Titanium abutment M
incl. AnoTite screw
GH 2.5 mm
L 8.5 mm
GH 4.0 mm
L 10.0 mm
GH 1.5 mm
L 9.0 mm, 20
GH 3.0 mm
L 10.5 mm, 20
GH 2.5 mm
L 12.0 mm
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
79
GH 1.0 mm
L 7.0 mm
M 1.6
L 9.0 mm
Prosthetics
Components series of abutments M
t Bars and bridges
REF 386-240-00
Bar abutment M
GH 1.0 mm
REF 386-241-00
Bar abutment M
GH 2.5 mm
REF 386-242-00
Bar abutment M
GH 4.0 mm
REF 386-243-00
Bar abutment M
GH 5.5 mm
REF 386-410-00
L 3.3 mm
REF 386-412-00
L 10.0 mm
REF 386-414-00
M 1.6
L 21.0 mm
REF 386-416-00
L 12.0 mm
REF 386-418-00
REF 386-420-00
REF 386-422-00
REF 386-426-00
L 12.0 mm
L 12.0 mm
L 4.5 mm
L 4.5 mm
REF 386-430-00
L 10.8 mm
REF 386-444-00
L 50.0 mm
REF 386-446-00
L 50.0 mm
REF 330-770-00
L 40.0 mm
B 2.1 mm
H 3.0 mm
REF 330-772-00
L 40.0 mm
REF 386-912-00
REF 386-916-00
AnoTite screw,
bar abutment
80
M 1.6
L 6.0 mm
M 1.6
L 6.0 mm
Prosthetics
Components series of abutments M
t LOCATOR
REF 386-251-00
LOCATOR abutment M
GH 1.0 mm
REF 386-252-00
LOCATOR abutment M
GH 2.0 mm
REF 386-253-00
LOCATOR abutment M
GH 3.0 mm
REF 386-254-00
LOCATOR abutment M
GH 4.0 mm
REF 386-255-00
LOCATOR abutment M
GH 5.0 mm
REF 386-512-00
REF 386-514-00
L 4.0 mm
4.0 mm
L 10.0 mm
REF 386-518-00
REF 386-520-00
REF 386-522-00
REF 386-524-00
REF 386-526-00
REF 386-528-00
REF 386-530-00
REF 386-534-00
81
black
transparent, 0 10,
medium 2.270 g
pink, 0 10,
low 1.365 g
blue, 0 10,
very low 680 g
green*,
extended angulation
10 20, 1.815 g
red*,
extended angulation
10 20, 680 g
white
L 8.0 mm
Prosthetics
Components series of abutments M
t Ball abutment
REF 386-260-00
Ball abutment M
GH 1.5 mm
Ball abutment 2.25 mm
REF 386-261-00
Ball abutment M
GH 3.0 mm
Ball abutment 2.25 mm
REF 386-262-00
Ball abutment M
GH 4.5 mm
Ball abutment 2.25 mm
REF 386-614-00
Laboratory implant,
ball abutment
REF 386-617-00
red
high, approx. 1.200 g
REF 386-616-00
green
standard, approx. 800 g
REF 386-620-00
red
high, approx. 1.200 g
REF 386-618-00
green
standard, approx. 800 g
REF 386-619-00
yellow
low, approx. 600 g
REF 386-622-00
REF 386-624-00
REF 386-626-00
82
Prosthetics
Components series of abutments M
t Magnet
REF 386-270-00
Steco Titanmagnetics
insert M x-Line
GH 3.0 mm
REF 386-271-00
Steco Titanmagnetics
insert M x-Line
GH 4.5 mm
REF 386-712-00
Steco Titanmagnetics
impression post x-Line
L 7.0 mm
REF 386-714-00
Steco Titanmagnetics
laboratory implant x-Line
L 9.0 mm
REF 386-716-00
Steco dentures
Titanmagnetics x-Line
L 2.6 mm
REF 386-718-00
REF 386-720-00
83
Series of abutments L
3.3
3.7
4.2
4.8
5.5
84
Series of abutments L
Prosthetics
85
Prosthetics
Components series of abutments L
t Impression
REF 385-310-00
REF 385-312-00
REF 385-910-00
REF 385-912-00
REF 385-320-00
REF 385-322-00
REF 385-323-00
REF 385-324-00
Screw
for impression post, open, L 10.0 mm
Screw
for impression post, open, L 14.0 mm
Impression post L,
closed
incl. impression cap L, bite
registration cap L and screw
Impression cap L
5 pieces
Positioning aid L
for impression post L, closed
L 10.0 mm
L 14.0 mm
M 1.6
L 16.0 mm
M 1.6
L 25.0 mm
L 7.0 mm
L 6.0 mm
L 6.0 mm
L 9.6 mm
t Model
REF 385-330-00
Laboratory implant L
L 12.0 mm
REF 384-330-00
Temporary abutment L
GH 3.0 mm
L 12.0 mm
REF 384-910-00
Screw
t Temporary restorations
incl. screw
M 1.6
L 13.5 mm
Scan abutment L,
customizable,
incl. AnoTite screw
Titanium cap L,
Zenotec, Wieland, incl. AnoTite screw
86
Prosthetics
Components series of abutments L
t Ceramics
REF 386-310-00
REF 386-311-00
REF 386-313-00
Ceramic abutment L
incl. AnoTite screw
Ceramic abutment L
incl. AnoTite screw
GH 3.0 mm
L 9.6 mm
GH 2.0 mm
L 9.6 mm, 15
Titanium base
ceramic abutment L
incl. AnoTite screw
REF 386-910-00
REF 386-914-00
M 1.6
L 9.0 mm
AnoTite screw
M 1.6
L 9.0 mm
L 12.0 mm
t Precious metal
REF 386-315-00
REF 386-910-00
REF 386-914-00
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
M 1.6
L 9.0 mm
t Titan
REF 386-330-00
REF 386-331-00
REF 386-332-00
REF 386-335-00
REF 386-336-00
REF 386-339-00
REF 386-910-00
REF 386-914-00
Titanium abutment L
incl. AnoTite screw
Titanium abutment L
incl. AnoTite screw
Titanium abutment L
incl. AnoTite screw
Titanium abutment L
incl. AnoTite screw
Titanium abutment L
incl. AnoTite screw
GH 2.5 mm
L 8.5 mm
GH 4.0 mm
L 10.0 mm
GH 1.5 mm
L 9.0 mm, 20
GH 3.0 mm
L 10.5 mm, 20
GH 2.5 mm
L 12.0 mm
M 1.6
L 9.0 mm
AnoTite screw
Prosthetic screw, Titanium
for laboratory use only
87
GH 1.0 mm
L 7.0 mm
M 1.6
L 9.0 mm
Prosthetics
Components series of abutments L
t Bars and bridges
REF 386-340-00
Bar abutment L
GH 1.0 mm
REF 386-341-00
Bar abutment L
GH 2.5 mm
REF 386-342-00
Bar abutment L
GH 4.0 mm
REF 386-343-00
Bar abutment L
GH 5.5 mm
REF 386-410-00
L 3.3 mm
REF 386-412-00
L 10.0 mm
REF 386-414-00
M 1.6
L 21.0 mm
REF 386-416-00
L 12.0 mm
REF 386-418-00
REF 386-420-00
REF 386-422-00
REF 386-426-00
L 12.0 mm
L 12.0 mm
L 4.5 mm
L 4.5 mm
REF 386-430-00
L 10.8 mm
REF 386-444-00
L 50.0 mm
REF 386-446-00
L 50.0 mm
REF 330-770-00
L 40.0 mm
B 2.1 mm
H 3.0 mm
REF 330-772-00
L 40.0 mm
REF 386-912-00
REF 386-916-00
AnoTite screw
bar abutment
88
M 1.6
L 6.0 mm
M 1.6
L 6.0 mm
Prosthetics
Components series of abutments L
t LOCATOR
REF 386-351-00
LOCATOR abutment L
GH 1.0 mm
REF 386-352-00
LOCATOR abutment L
GH 2.0 mm
REF 386-353-00
LOCATOR abutment L
GH 3.0 mm
REF 386-354-00
LOCATOR abutment L
GH 4.0 mm
REF 386-355-00
LOCATOR abutment L
GH 5.0 mm
REF 386-512-00
REF 386-514-00
L 4.0 mm
4.0 mm
L 10.0 mm
REF 386-518-00
REF 386-520-00
REF 386-522-00
REF 386-524-00
REF 386-526-00
REF 386-528-00
REF 386-530-00
REF 386-534-00
black
transparent, 0 10,
medium 2.270 g
pink, 0 10,
low 1.365 g
blue, 0 10,
very low 680 g
green*,
extended angulation
10 20, 1.815 g
red*
extended angulation
10 20, 680 g
white
L 8.0 mm
4 pieces
89
Prosthetics
Components series of abutments L
t Ball abutments
REF 386-360-00
Ball abutment L
GH 1.5 mm
Ball abutment 2.25 mm
REF 386-361-00
Ball abutment L
GH 3.0 mm
Ball abutment 2.25 mm
REF 386-362-00
Ball abutment L
GH 4.5 mm
Ball abutment 2.25 mm
REF 386-614-00
REF 386-617-00
red
high, approx. 1.200 g
REF 386-616-00
green
standard, approx. 800 g
REF 386-620-00
red
high, approx. 1.200 g
REF 386-618-00
green
standard, approx. 800 g
REF 386-619-00
yellow
low, approx. 600 g
REF 386-622-00
REF 386-624-00
REF 386-626-00
90
Prosthetics
Components series of abutments L
t Magnet
REF 386-370-00
Steco Titanmagnetics
insert L x-Line
GH 3.0 mm
REF 386-371-00
Steco Titanmagnetics
insert L x-Line
GH 4.5 mm
REF 386-712-00
Steco Titanmagnetics
impression post x-Line
L 7.0 mm
REF 386-714-00
Steco Titanmagnetics
laboratory implant x-Line
L 9.0 mm
REF 386-716-00
Steco dentures
Titanmagnetics x-Line
L 2.6 mm
REF 386-718-00
REF 386-720-00
91
Accessories
t Surgical accessories
94 95
96
t Prosthetic accessories
97
t Training implants
98
Accessories
Accessories
92
Accessories
Accessories
93
Accessories
Surgical accessories
t
REF 387-509-00
Drill extension
ISO shank-Hexagon
L 21.0 mm
REF 387-510-00
Drill extension
ISO shank
L 21.0 mm
REF 387-511-00
L 13.0 mm
REF 387-514-00
Paralleling pin
1.4 / 2.0 mm
L 27.0 mm
REF 387-523-00
Insertion key S /
ratchet
for implants 3.3 mm
REF 387-524-00
Insertion key M /
ratche
for implants 3.7 mm / 4.2 mm
REF 387-525-00
Insertions key L /
ratche
for implants 4.8 mm / 5.5 mm
REF 387-515-00
SW 2.5
L 19.0 mm
REF 387-516-00
SW 2.5
L 19.0 mm
REF 387-517-00
SW 2.5
L 25.0 mm
REF 387-518-00
SW 2.5
L 25.0 mm
REF 387-519-00
Hex key
ratchet
SW 2.5
L 8.0 mm
REF 387-520-00
Hex key
ratchet
SW 2.5
L 13.0 mm
REF 387-522-00
Hex key
ratchet
SW 2.5
L 23.0 mm
REF 300-006-00
Material plates
REF 381-500-00
REF 387-530-00
Cleaning needle
3 pieces
94
Accessories
Surgical accessories
t Boneregeneration/Single items
REF 360-100-00
Titanium Mesh
REF 360-110-00
Titanium Mesh
REF 360-120-00
Titanium Mesh
REF 360-210-00
1.0 x 2.0 mm
REF 360-220-00
1.0 x 3.0 mm
REF 360-240-00
1.0 x 4.0 mm
REF 360-250-00
1.0 x 5.0 mm
REF 360-230-00
1.2 x 3.0 mm
REF 360-260-00
1.5 x 7.0 mm
REF 360-270-00
1.5 x 9.0 mm
REF 360-280-00
1.5 x 11.0 mm
REF 360-400-00
Screwdriver handle
REF 360-401-00
REF 360-402-00
REF 360-405-00
Wrench
for screw 1.0 mm/1.2 mm
REF 360-406-00
Wrench
for screw 1.5 mm
REF 360-410-00
Wire cutter,
curved
REF 360-500-00
Pre-Drill
with depth stop
0.7 x 3.5 mm
REF 360-501-00
Pre-Drill
with depth stop
1.1 x 7.0 mm
REF 360-502-00
95
Accessories
Surgical and prosthetic accessories
t
REF 385-124-00
REF 385-224-00
REF 385-324-00
Positioning aid S
for impression post S, closed
Positioning aid M
for impression post M, closed
Positioning aid L
for impression post L, closed
L 9.6 mm
L 9.6 mm
L 9.6 mm
REF 387-610-00
Hex key
ISO shank
SW 1.3
L 20.0 mm
REF 387-612-00
Hex key
ISO shank
SW 1.3
L 26.0 mm
REF 387-620-00
Hex key
ratchet
SW 1.3
L 16.0 mm
REF 387-622-00
Hex key
ratchet
SW 1.3
L 26.0 mm
REF 387-640-00
Insertion key
bar abutment ratchet
L 16.0 mm
REF 387-650-00
L 15.5 mm
REF 387-660-00
L 15.0 mm
REF 387-670-00
Insertion key
Titanmagnetics x-Line
ratchet
L 15.0 mm
REF 387-600-00
REF 387-602-00
REF 387-604-00
incl. screw
Torque ratchet
scaled-down illustration
Sure-grip wheel
scaled-down illustration
Locking key
placement aid
scaled-down illustration
REF 387-415-00
Silicone o-ring
10 pieces
96
15 50 Ncm
18.0 mm
SW 3.6
L 79.0 mm
Accessories
Prosthetic accessories
t
REF 387-112-00
Polishing aid S
REF 387-212-00
Polishing aid M
REF 387-312-00
Polishing aid L
REF 387-116-00
Ceramic abutment
holder S, M
scaled-down illustration
REF 387-316-00
Ceramic abutment
holder L
scaled-down illustration
REF 330-831-00
REF 387-720-00
REF 387-730-00
AnatomicHold
scaled-down illustration
Milling cutter
bar abutment fit
Countersink screw fit
AnoTite screw
scaled-down illustration
REF 330-821-00
REF 330-832-00
REF 387-740-00
REF 387-742-00
Activator/deactivator
Unor Ecco
6 Ncm
REF 387-745-00
LOCATOR instrument
REF 386-532-00
LOCATOR measurement
guide
REF 386-534-00
LOCATOR angled
measuring post
4 pieces
97
L 5.0 mm
L 8.0 mm
Accessories
Training implants
t
REF 388-037-13
Training implant M
3.7 mm
L 13.0 mm
REF 388-042-13
Training implant M
4.2 mm
L 13.0 mm
REF 388-400-00
98
Accessories
99
Service
t Comprehensive service
102 103
t Information materials
104 106
Printed media
Models
t Forms
tioLogic implant planning
tioLogic surgery protocol
tioLogic practice record card
t Treatment examples
104 105
106
107 109
107
108
109
110 117
100
Service
Service
tiologi
en
evaluat
ed on t The implant s
he base
ys
of expe tem,
rience
989-958-20_tioLogic_BasisF_0510.indd 1
989-95
8-20_tio
Logic_
BasisF_
0510.in
dd 1
101
17.05.20
10 12
:41:09
U
hr
c en
Service
Comprehensive service
Reliability for the user
tiologic
en
evaluate
The imp
d on the
lant syst
base of
em,
experie
nce
In implantology, success is based on competent exchange of knowledge and experience as well as
professional data management. Therefore, a comprehensive, high-quality range of services is Dentaurum
Implants top priority. Be it during direct personal contact or through written communication. We live the
philosophy Quality before Quantity.
989-963-20
_Sicherheit
sPass_0607
.1 1
25.05.2007
15:13:48
Uhr
102
Dentaurum Implants offer a wide range of further education for beginners and advanced users. A group
of speakers of above average expertise guarantees the high quality of these courses. Here also, we apply
Quality before Quantity.
103
Service
t Printed media
General
In implantology in particular, comprehensive, concise and significant information is indispensable. Therefore most of the informations around
the tioLogic implant system are available both in digital and in traditional form. They are divided into basic, specific and informative documents
for patient advice.
Specialised information
The reliability and SafetyPass (REF 989-963-20) describes in detail tioLogic safety concept, presenting the idea with tangible examples and
documenting the high standard of safety through extensive research results. Use the Implant Planning (REF 989-966-12) form to fill out all relevant
planning details and transfer these to the dental laboratory for prosthetic planning. The Surgical Protocol (REF 989-966-02) contains all data
specific to implant and insertion and surgery for each individual case. The Practice Record Card (REF 989-966-22) acts as a messenger between
dental office and dental laboratory making for effective and rapid communication of all relevant implant and prosthetic data.
Patient Information
Extensive patient advice and education builds trust in the clinician and is an important premise for the success of treatment. Dentaurum Implants
offer a compact range of high-quality materials developed in close cooperation with experienced users.
www.dentaurum-implants.de
gic
tiolo
The
ical
tion
volu
cal E
Log
en
tio
lu
Evo
ogi
he L
989-963-
20_Siche
rheitsPa
ss_1109.
indd 1
24.1
ated
evalu
m,
syste ce
plant
en
The im of experi
e
s
e ba
on th
2010
17.05.
12:41:
09 Uh
1.2009
10:46:24
The missing
tooth
Uhr
Standard treatment
Implant treatment
Standard treatment
Implants
Standard treatment
Clasp-retained denture
before fitting
Implant-borne bridge
before fitting
Fitted bridge
Advantages:
Advantages:
Advantages:
Advantages:
Advantages:
Advantages:
Fixed restoration,
very pleasant aesthetics.
Fixed restoration,
very pleasant aesthetics,
no loss of hard tissue
from neighbouring teeth.
Low-cost treatment.
Low-cost treatment.
Disadvantages:
ioLogi
8-20_t
989-95
dd
0510.in
sF_
c_Basi
Healthy neighbouring
teeth must be ground and
prepared. After the bridge
has been fitted, much effort
is required for treating the
abutments.
Disadvantages:
None
Disadvantages:
Removable restoration.
Clasps are usually visible.
Bothersome metal bar
in the mouth.
Uncomfortable to wear.
Can be prone to repairs.
Disadvantages:
None
Disadvantages:
The denture often doesnt
fit accurately. The gum of
the upper jaw is covered
completely, which may
lead to taste impairment.
Restoration
with implants
Implants are anchored
in bone and support
the denture.
Disadvantages:
None
www.dentaurum-implants.de
989-185-02_Einsatz_Implantate_0907.indd 2
104
Service
Printed media
t tioLogic Information for users
REF 903-944-70
REF 989-958-20
REF 989-623-20
REF 989-608-20
REF 989-999-20
REF 989-959-20
REF 989-960-20
REF 989-965-20
REF 989-963-20
REF 989-966-02
REF 989-966-12
tioLogic Implantplanning
REF 989-966-22
REF 989-187-20
REF 989-190-20
REF 989-961-20
REF 989-185-02
105
Models
t Demonstration models
REF 388-420-00
Demo implant M
Scale 5:1
REF 388-422-00
Scale 5:1
REF 388-424-00
Scale 5:1
REF 388-438-00
Scale 5:1
REF 388-430-00
Scale 5:1
REF 388-432-00
Scale 5:1
REF 388-442-00
Scale 5:1
REF 388-448-00
Scale 5:1
REF 388-410-00
Scale 5:1
106
Service
Forms
t Implant Planning (REF 989-966-12)
tioLogic implant planning en
Patient:
Practice:
First name:
Surname:
Date of birth:
Planned prosthetic restoration:
cement-retained / screw-retained
removable
Single restoration
Bridgework
Resilient bar /
Bar attachment
Milled bar
Telescope
Ball attachment
Locator
Magnet
18
17
16
15
14
13
12
11
21
22
23
24
25
26
27
28
31
32
33
34
35
36
37
38
Implant
dimensions1
Implant
dimensions1
48
47
46
45
44
43
42
41
Implant diameter
3.3 mm
Series of abutments
3.7 mm
4.2 mm
4.8 mm
5.5 mm
L
Implant Planning
Date of issue:
All components are marked with the relevant series of abutment S, M or L. The 3.3 mm implants are not available in a 9.0 mm length;
the 5.5 mm implants are not available in a 17.0 mm length
Pack contents practice / laboratory:
Pack contents practice:
Surgical stent
Temporary restoration
Photographs
Quote
Bite registration
Other
Tooth shade
Comments:
Stock tray
Model
Bite
Upper
Upper
Upper
Upper
Lower
Lower
Lower
Lower
Restoration
Articulator
Facebow
Photo
Finish
989-966-en
Custom tray
Printed by Dentaurum
Germany
06/07
107
freige
gedru
M/W-
Service
Forms
t Surgical Protocol (REF 989-966-02) - only PDF-Version
tioLogic surgical protocol en
Patient:
Practice:
First name:
Surname:
Date of birth:
Insurance company:
Implant location:
18
17
16
15
14
13
12
11
21
22
23
24
25
26
27
28
48
47
46
45
44
43
42
41
31
32
33
34
35
36
37
38
Implant
dimensions1
(label)
After implant placement
the adhesive labels
included in the implant
packaging can be used
for documentation.
Implant
dimensions1
(label)
After implant placement
the adhesive labels
included in the implant
packaging can be used
for documentation.
Preoperative
Postoperative
Anaesthesia / Quantity
Block anaesthesia
Infiltration anaesthesia
Bone quality
Membrane
Bone Condensing
Bone Spreading
Other
Surgical Protocol
Date of issue:
Complications:
Wound infection
Suture dehiscence
Other:
06/07
9 / 11 / 13 / 15 / 17 mm
3.3 mm
3.7 mm
4.2 mm
M
4.8 mm
5.5 mm
L
All components are marked with the relevant series of abutment S, M or L. The 3.3 mm implants are not available in a 9.0 mm length;
the 5.5 mm implants are not available in a 17.0 mm length.
989-966-02
Comments:
Germany
Printed by Dentaurum
108
freige
gedru
M/W-
Service
Forms
t Practice Record Card (REF 989-966-22) - only PDF-Version
tioLogic practice record card en
Dental laboratory:
Technician:
Date received:
Date sent:
Date sent:
Implant location:
18
17
16
15
14
13
12
11
21
22
23
24
25
26
27
28
31
32
33
34
35
36
37
38
Implant
dimensions1
(label)
After implant placement
the adhesive labels
included in the implant
packaging can be used
for documentation.
Abutment
(Refer to label
for description)
Prosthetic restoration2
Implant
dimensions1
(label)
After implant placement
the adhesive labels
included in the implant
packaging can be used
for documentation.
Abutment
(Refer to label
for description)
Prosthetic restoration2
48
1
47
46
45
44
43
42
41
Implant diameter
3.3 mm
Series of abutments
3.7 mm
4.2 mm
4.8 mm
5.5 mm
All components are marked with the relevant series of abutment S, M or L. The 3.3 mm implants are not available in a 9.0 mm length;
the 5.5 mm implants are not available in a 17.0 mm length.
2
Prosthetic restoration:
cement-retained / screw-retained
removable
Single restoration
Bridgework
Resilient bar /
Bar attachment
Milled bar
Telescope
Ball attachment
Locator
Magnet
Material information:
Alloy:
Adhesive:
Ceramic:
Solder:
Acrylic:
Tooth shade:
109
06/07
Date of birth:
Practice:
Germany
Surname:
Printed by Dentaurum
First name:
989-966-22
Patient:
Date of issue:
freige
gedru
M/W-
Service
Treatment examples
t Single crown, cemented, closed impression, ceramic abutment, angulate 15
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Ceramic abutment, 15
Laboratory
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Ceramic abutment
Laboratory
110
Treatment examples
t Single crown, cemented, closed impression, titanium abutment, angulate 20
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Titanium abutment, 20
Laboratory
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Laboratory
111
Service
Treatment examples
t Single crown, screw-retained occlusally, open impression, precious metal abutment
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Laboratory
Illustration
Place
Number
tioLogic implant
Practice
Bar abutment
Practice
Practice
112
Treatment examples
t Bar restoration, open impression, prefabricated titanium bar
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Bar abutment
Laboratory
Laboratory
Laboratory
t Bar immediate restoration, impression over bar abutment, prefabricated titanium bar
Description
Illustration
Place
Number
tioLogic implant
Practice
Bar abutment
Practice
Practice
Practice
Laboratory
Laboratory
Laboratory
113
Service
Treatment examples
t Bar restoration, open impression, milled bar
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Bar abutment
Laboratory
Laboratory
Laboratory
t Bar restoration, open impression, titanium caps for the adhesive technique
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Bar abutment
Laboratory
Laboratory
Laboratory
Laboratory
114
Treatment examples
t Telescopic restoration, open impression, precious metal abutment
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingivaformer
Practice
Practice
Laboratory implant
Laboratory
Laboratory
t B
all abutment restoration, impression over the ball abutment,
polymerization into existing denture
Description
Illustration
Place
Number
tioLogic implant
Practice
Ball abutment
Practice
Matrix Ti/Plastic
Practice
115
Service
Treatment examples
t Ball abutment restoration, open impression, denture remake
Description
Illustration
Place
Number
tioLogic implant
Practice
Gingiva former
Practice
Practice
Laboratory implant
Laboratory
Ball abutment
Laboratory
Matrix Ti/Plastic
Laboratory
Illustration
Place
Number
tioLogic implant
Practice
LOCATOR abutment
Practice
Practice
Laboratory
LOCATOR matrix
Laboratory
116
Treatment examples
t Magnet restoration, impression over Titanmagnetics insert x-Line
Description
Illustration
Place
Number
tioLogic implant
Practice
Practice
Practice
Steco Titanmagnetics
laboratory implant x-Line
Laboratory
Steco Titanmagnetics
denture magnet x-Line
Laboratory
117
Technical data
t Material data
120 121
t Quality system
122 123
118
Technical data
Technical data
119
Technical data
Material data
t Chemical composition
Zirconia dioxide
Density
6.05 g/cm3
Porosity, open
0%
Particle size
0.5 m
Flexural strength
1.600 MPa
WAK
10x10-6 1/k
Y2O3
4.5 % 5.4 %
HfO2
<2%
Al2O3
< 0.5 %
other oxides
< 0.5 %
ZrO2
Rest
Density
4.5 g/cm3
Tensile strength
Elongation at rupture
16 % min.
Modulus of elasticity
110 GPa
0.4 % max.
Fe
0.3 % max.
0.1 % max.
0.05 % max.
0.013 % max.
Ti
Rest
Density
4.6 g/cm3
870 MPa
Tensile strength
920 MPa
Elongation at rupture
8%
Modulus of elasticity
105 GPa
AI
5.5 % 6.75 %
3.5 % 4.5 %
Fe
0.3 % max.
0.08 % max.
0.05 % max.
0.015 % max.
0.2% max.
Ti
Rest
Chemical composition
(% mass)
Physical and
mechanical properties
(solution heat treated)
Chemical composition
(% mass)
Physical and
mechanical properties
Chemical composition
(% mass)
120
Material data
t Chemical composition
Precious metal alloy
Density
17.5 g/cm3
Weight
Chemical composition
(% mass)
PEEK
0.307 g
0.359 g
0.482 g
0.260 g
Liquidus temperature
1.490 C/2.714 F
Solidus temperature
1.400 C/2.552 F
Modulus of elasticity
136 GPa
Hardness
Elongation at rupture
18 (w) / 17 (a) %
Tensile strength
WAK
12.5x10-6 1/k
Au
60 %
Pt
19 %
Pd
20 %
Ir
1%
Chemical
composition
Colour
White
Yield strength
95 MPa
Elongation
>25 %
4.2 GPa
Operating temperature
Titanium magnets
Housing
Magnet core
121
Technical data
Quality system
t Quality assurance for the user and patient
Dentaurum Implants has over 10 years experience in implantology, while its parent company Dentaurum can look back on more than
120 years experience in prosthetic dentistry. This solid foundation ensured that development was based on a wealth of experience with
the focus on the user and high-quality production of the tioLogic implant system.
In all its business activities Dentaurum Implants GmbH, like the parent company Dentaurum, meets the requirements of the international
quality management standards:
The term quality management covers systematic planning, implementation and documentation of all activities that have an
influence on the quality of a product before, during and after its manufacture. The focus is not therefore solely on the final inspection of
a product but on continuous quality control during development of the product, from raw material to manufacture right through
to storage and sale. The above standards define in detail the criteria for ensuring comprehensive quality assurance by a company
for all its operating procedures.
Based on this quality management system Dentaurum Implants guarantees traceability and that the quality of the products and services
will meet the expectations of the customers and patients. The products fulfill the fundamental requirements of medical products in
terms of product performance and patient safety as defined in European laws and directives. As the respective products of Dentaurum
Implants GmbH meet the requirements of the European Directive 93/42/EEC for medical products, they carry the CE mark.
t Eco-management system
The eco-management system and the quality management system are integrated in the Dentaurum Group management system. The
eco-management system is implemented by the Management System Working Group, which is made up of members representing
eco-protection, hazardous goods safety, health and safety, material science and quality management.
Scope of validation
The eco-policy, eco-management
system, eco-programme, eco-audit completed, eco-audit scheme and the basic environmental
statement of Dentaurum, J.P. Winkelstroeter KG and Dentaurum Implants GmbH, Ispringen, Turnstrae 31, Germany, fully comply with the
standards and requirements of the Regulation (EEC) No. 761/2001 (EMAS II).
122
Aesthetics
Reliability
Handling
123
Index
Alphabetical
t C
t A
Abutment selection aid set.......................................88
Adapter ISO shank/ratchet........................41, 43, 84
Activator/deactivator Unor Ecco...............................87
AnatomicHold..........................................................87
AnatomicTwist.........................................................87
AnoTite screw
M 1.6. L 9.0 mm.......................................61, 69, 77
AnoTite screw bar abutment
M 1.6. L 6.0 mm.......................................62, 70, 78
t B
Ball abutments
S, GH 1.5 mm.......................................................64
S, GH 3.0 mm.......................................................64
S, GH 4.5 mm.......................................................64
M, GH 1.5 mm.....................................................72
M, GH 3.0 mm.....................................................72
M, GH 4.5 mm.....................................................72
L, GH 1.5 mm.......................................................80
L, GH 3.0 mm.......................................................80
L, GH 4.5 mm.......................................................80
Ball-end plugger.......................................................49
Ball laboratory implant.................................64, 72, 80
Bar abutments
S, GH 1.0 mm.......................................................62
S, GH 2.5 mm.......................................................62
S, GH 4.0 mm.......................................................62
S, GH 5.5 mm.......................................................62
M, GH 1.0 mm.....................................................70
M, GH 2.5 mm.....................................................70
M, GH 4.0 mm.....................................................70
M, GH 5.5 mm.....................................................70
L, GH 1.0 mm.......................................................78
L, GH 2.5 mm.......................................................78
L, GH 4.0 mm.......................................................78
L, GH 5.5 mm.......................................................78
Bar rider Au/Pt, milled.................................62, 70, 78
Bar rider and retention,
rematitan, macro.....................................62, 70, 78
Bite registration caps
S...........................................................................60
M.........................................................................68
L...........................................................................76
Bone Screws titanium
1.0 x 2.0 mm........................................................85
1.0 x 3.0 mm........................................................85
1.0 x 4.0 mm........................................................85
1.0 x 5.0 mm........................................................85
1.2 x 3.0 mm........................................................85
1.5 x 7.0 mm........................................................85
1.5 x 9.0 mm........................................................85
1.5 x 11.0 mm......................................................85
124
Ceramic abutments
S...........................................................................61
S, 15...................................................................61
M.........................................................................69
M, 15..................................................................69
L...........................................................................77
L, 15...................................................................77
Closure screw bar........................................62, 70, 78
Conical formers
brown S 3.3 mm, L 11.0 mm ................35, 39, 41
brown S 3.3 mm, L 13.0 mm ................35, 39, 41
brown S 3.3 mm, L 15.0 mm ................35, 39, 41
brown S 3.3 mm, L 17.0 mm ................35, 39, 41
yellow M 3.7 mm, L 9.0 mm .................35, 39, 41
yellow M 3.7 mm, L 11.0 mm................35, 39, 41
yellow M 3.7 mm, L 13.0 mm ...............35, 39, 41
yellow M 3.7 mm, L 15.0 mm ...............35, 39, 41
yellow M 3.7 mm, L 17.0 mm ...............35, 39, 41
red M 4.2 mm, L 9.0 mm . ....................35, 39, 41
red M 4.2 mm, L 11.0 mm . ..................35, 39, 41
red M 4.2 mm, L 13.0 mm . ..................35, 39, 41
red M 4.2 mm, L 15.0 mm . ..................35, 39, 41
red M 4.2 mm, L 17.0 mm . ..................35, 39, 41
blue L 4.8 mm, L 9.0 mm . ....................35, 39, 41
blue L 4.8 mm, L 11.0 mm . ..................35, 39, 41
blue L 4.8 mm, L 13.0 mm . ..................35, 39, 41
blue L 4.8 mm, L 15.0 mm . ..................35, 39, 41
blue L 4.8 mm, L 17.0 mm . ..................35, 39, 41
green L 5.5 mm, L 9.0 mm ...................35, 39, 41
green L 5.5 mm, L 11.0 mm .................35, 39, 41
green L 5.5 mm, L 13.0 mm .................35, 39, 41
green L 5.5 mm, L 15.0 mm .................35, 39, 41
Conical formers (dense bone)
brown S 3.3 mm, L 17.00 mm...............36, 39, 41
yellow M 3.7 mm, L 17.0 mm................36, 39, 41
red M 4.2 mm, L 17.0 mm.....................36, 39, 41
blue L 4.8 mm, L 17.0 mm.....................36, 39, 41
green L 5.5 mm, L 17.0 mm..................36, 39, 41
Countersink screw fit
AnoTite prosthetic screw......................................87
t D
Double retractor.......................................................49
Drill block.................................................................49
Drill extension ISO shank.....................39, 41, 43, 84
Drills for guide sleeves (laboratory)
shank 2.35 mm.....................................................31
t E
t G
Gingiva formers
S, conical, GH 1.5 mm..........................................52
S, conical, GH 3.0 mm..........................................52
S, conical, GH 4.5 mm..........................................52
S, conical, GH 6.0 mm..........................................52
S, cylindrical, GH 1.5 mm......................................53
S, cylindrical, GH 3.0 mm......................................53
S, cylindrical, GH 4.5 mm......................................53
S, cylindrical, GH 6.0 mm......................................53
M, conical, GH 1.5 mm.........................................52
M, conical, GH 3.0 mm.........................................52
M, conical, GH 4.5 mm.........................................52
M, conical, GH 6.0 mm.........................................52
M, cylindrical, GH 1.5 mm....................................53
M, cylindrical, GH 3.0 mm....................................53
M, cylindrical, GH 4.5 mm....................................53
M, cylindrical, GH 6.0 mm....................................53
L, conical, GH 1.5 mm..........................................52
L, conical, GH 3.0 mm..........................................52
L, conical, GH 4.5 mm..........................................52
L, conical, GH 6.0 mm..........................................52
L, cylindrical, GH 1.5 mm......................................53
L, cylindrical, GH 3.0 mm......................................53
L, cylindrical, GH 4.5 mm......................................53
L, cylindrical, GH 6.0 mm......................................53
Graft material dish...................................................49
Guide sleeves titanium,
L 6.0 mm (inner 2.0 mm)...................................31
L 10.0 mm (inner 2.0 mm).................................31
t H
t I
Implants
brown S 3.3 mm, L 11.0 mm ............................51
brown S 3.3 mm, L 13.0 mm ............................51
brown S 3.3 mm, L 15.0 mm ............................51
brown S 3.3 mm, L 17.0 mm.............................51
yellow M 3.7 mm, L 9.0 mm .............................51
yellow M 3.7 mm, L 11.0 mm ...........................51
yellow M 3.7 mm, L 13.0 mm ...........................51
yellow M 3.7 mm, L 15.0 mm ...........................51
yellow M 3.7 mm, L 17.0 mm ...........................51
red M 4.2 mm, L 9.0 mm . ................................51
red M 4.2 mm, L 11.0 mm . ..............................51
red M 4.2 mm, L 13.0 mm . ..............................51
red M 4.2 mm, L 15.0 mm . ..............................51
red M 4.2 mm, L 17.0 mm . ..............................51
blue L 4.8 mm, L 9.0 mm . ................................51
blue L 4.8 mm, L 11.0 mm . ..............................51
blue L 4.8 mm, L 13.0 mm.................................51
blue L 4.8 mm, L 15.0 mm . ..............................51
blue L 4.8 mm, L 17.0 mm . ..............................51
green L 5.5 mm, L 9.0 mm ...............................51
green L 5.5 mm, L 11.0 mm .............................51
green L 5.5 mm, L 13.0 mm .............................51
green L 5.5 mm, L 15.0 mm .............................51
Impression caps
S...........................................................................60
M.........................................................................68
L...........................................................................76
Impression posts
S, open, L 10.0 mm..............................................60
S, open, L 14.0 mm..............................................60
S, closed, L 7.0 mm..............................................60
M, open, L 10.0 mm.............................................68
M, open, L 14.0 mm.............................................68
M, closed, L 7.0 mm.............................................68
L, open, L 10.0 mm..............................................76
L, open, L 14.0 mm..............................................76
L, closed, L 7.0 mm...............................................76
Bar...........................................................62, 70, 78
Indicator tag with adhesive backing...................38, 40
Inner matrix Unor Ecco Au/Pt,
standard...................................................64, 72, 80
high..........................................................64, 72, 80
Inner matrix Unor Ecco Ti/Plastic
green, standard........................................64, 72, 80
red, high...................................................64, 72, 80
yellow, low...............................................64, 72, 80
Hex keys implant SW 2.5
ISO shank, L 19.0 mm.........................39, 41, 43, 84
ISO shank, L 25.0 mm.........................39, 41, 43, 84
Ratchet, L 8.0 mm..............................39, 41, 43, 84
Ratchet, L 13.0 mm............................39, 41, 43, 84
Ratchet, L 23.0 mm............................39, 41, 43, 84
Insertion key
Ball abutment ratchet......................39, 41, 43, 86
Bar abutment ratchet.......................39, 41, 43, 86
LOCATOR abutment ratchet.............................86
Titanmagnetics x-Line ratchet ..........................86
Instrument tray........................................................42
t L
125
Index
Laboratory implants
S...........................................................................60
M.........................................................................68
L...........................................................................76
Bar...........................................................62, 70, 78
La Grange scissors....................................................49
LOCATOR
Impression caps........................................63, 71, 79
Abutments S, GH 1.0 mm.....................................63
Abutments S, GH 2.0 mm.....................................63
Abutments S, GH 3.0 mm.....................................63
Abutments S, GH 4.0 mm.....................................63
Abutments S, GH 5.0 mm.....................................63
Abutments M, GH 1.0 mm...................................71
Abutments M, GH 2.0 mm...................................71
Abutments M, GH 3.0 mm...................................71
Abutments M, GH 4.0 mm...................................71
Abutments M, GH 5.0 mm...................................71
Abutments L, GH 1.0 mm.....................................79
Abutments L, GH 2.0 mm.....................................79
Abutments L, GH 3.0 mm.....................................79
Abutments L, GH 4.0 mm.....................................79
Abutments L, GH 5.0 mm.....................................79
denture cap..............................................63, 71, 79
Laboratory implants..................................63, 71, 79
Matrices (black, transparent, pink, blue)....63, 71, 79
LOCATOR instrument.............................................87
LOCATOR retention inserts
blue (very low)..........................................63, 71, 79
green (extended angulation)...........................71, 79
pink (low).................................................63, 71, 79
red (extended angulation)...............................71, 79
transparent (medium)...............................63, 71, 79
LOCATOR
processing insert.......................................63, 71, 79
Measurement guide..............................................87
Parallel post........................................63, 71, 79, 87
Locking key placement aid.....................39, 41, 43, 86
t M
Material tabs............................................................84
Matrices Unor Ecco
AU-PT (standard)......................................64, 72, 80
TI/Plastic (green, standard).......................64, 72, 80
TI/Plastic (red, high)..................................64, 72, 80
Micro-scissors...........................................................49
Milling cutter bar abutment fit..............................87
t N
NanoBone granulates,
Granule size 0.6 x 2.0 mm, 1 x 0.6 ml...................50
Granule size 0.6 x 2.0 mm, 5 x 0.6 ml...................50
Granule size 0.6 x 2.0 mm, 1 x 1.2 ml...................50
Granule size 0.6 x 2.0 mm, 5 x 1.2 ml...................50
Granule size 0.6 x 2.0 mm, 1 x 2.4 ml...................50
Granule size 0.6 x 2.0 mm, 5 x 2.4 ml...................50
Granule size 1.0 x 2.0 mm, 1 x 1.2 ml...................50
Granule size 1.0 x 2.0 mm, 5 x 1.2 ml...................50
Granule size 1.0 x 2.0 mm, 1 x 2.4 ml...................50
Granule size 1.0 x 2.0 mm, 5 x 2.4 ml...................50
126
Needle holder..........................................................49
t O
Osteotome trays
Surgical hammer...................................................46
Bone chisel 4.0 mm........................................45, 46
Bone chisel 6.0 mm........................................45, 46
Tray......................................................................44
OsteotomicHold..............................................45, 46
Osteotome, concave, straight, 2.4 mm.................46
Osteotome, concave, straight, 3.1 mm.................46
Osteotome, concave, straight, 3.7 mm.................46
Osteotome, concave, straight, 4.2 mm.................46
Osteotome, concave, angled, 2.4 mm...................46
Osteotome, concave, angled, 3.1 mm...................46
Osteotome, concave, angled, 3.7 mm...................46
Osteotome, concave, angled, 4.2 mm...................46
Osteotome, convex, straight, 2.4 mm.............45, 46
Osteotome, convex, straight, 3.1 mm.............45, 46
Osteotome, convex, straight, 3.7 mm.............45, 46
Osteotome, convex, straight, 4.2 mm.............45, 46
Osteotome, convex, angled, 2.4 mm..............45, 46
Osteotome, convex, angled, 3.1 mm..............45, 46
Osteotome, convex, angled, 3.7 mm..............45, 46
Osteotome, convex, angled, 4.2 mm..............45, 46
t P
Paralleling pin
1.4/2.0 mm, L 9.0 mm....................39, 41, 43, 84
Periodontal measuring probe...................................49
Pilot drill, 1.4 mm, L 17.0 mm
without stop.........................................................34
Placement aid S, M, L.............................39, 41, 43, 84
Plastic cap bar..............................................62, 70, 78
Polishing aids
S...........................................................................87
M.........................................................................87
L...........................................................................87
Precious metal abutment
S, cast on..............................................................61
M, cast on............................................................69
L, cast on..............................................................77
Precious metal cap bar.................................62, 70, 78
Pre-Drill L 17.0 mm
for guide sleeve L 6.0 mm.....................................31
Pre-Drill L 21.0 mm
for guide sleeve L 10.0 mm...................................31
Pre-Drills,
0.7 x 3.5 mm........................................................85
1.1 x 7.0 mm........................................................85
1.1/1.6 x 11.0 mm...............................................85
Prosthetic screw
Titanium......................................................61, 69, 77
bar, Titanium...............................................62, 70, 78
PTFE filter...........................................................38, 40
t R
Raspatories,
broad ..................................................................49
narrow.................................................................49
Reamer screw channel
AnoTite prosthetic screw......................................87
Resilient bars
plastic, macro...........................................62, 70, 78
rematitan, macro.....................................62, 70, 78
Round bur, 1.8 mm...................................34, 39, 41
t S
t T
Temporary abutments
S, GH 3.0 mm.......................................................60
M, GH 3.0 mm.....................................................68
L, GH 3.0 mm.......................................................76
Thread taps
brown S 3.3 mm . .................................36, 39, 41
yellow M 3.7 mm .................................36, 39, 41
red M 4.2 mm ......................................36, 39, 41
blue L 4.8 mm ......................................36, 39, 41
green L 5.5 mm ....................................36, 39, 41
TIOSET tray.............................................................48
Tissue forceps..........................................................49
Titanium abutments
127
t W
Wire Cutters............................................................85
t X
Index
Nummerisch
t
300-006-00..................................................................100
310-010-00..................................................................100
310-015-00..................................................................100
330-560-00....................................................................35
330-770-00........................................................78, 86, 94
330-772-00........................................................78, 86, 94
330-821-00..................................................................103
330-831-00..................................................................103
330-832-00..................................................................103
350-010-00....................................................................65
350-102-00....................................................................60
350-105-00....................................................................61
350-105-00..............................................................61, 62
350-106-00....................................................................62
350-140-00....................................................................61
350-140-00..............................................................61, 62
350-141-00....................................................................61
350-141-00..............................................................61, 62
350-142-00....................................................................61
350-142-00..............................................................61, 62
350-143-00....................................................................61
350-143-00..............................................................61, 62
350-145-00....................................................................61
350-145-00..............................................................61, 62
350-146-00....................................................................61
350-146-00..............................................................61, 62
350-147-00....................................................................61
350-147-00..............................................................61, 62
350-148-00....................................................................61
350-148-00..............................................................61, 62
350-150-00....................................................................62
350-151-00....................................................................62
350-152-00....................................................................62
350-153-00....................................................................62
350-155-00....................................................................62
350-156-00....................................................................62
350-157-00....................................................................62
350-158-00....................................................................62
350-160-00....................................................................61
350-160-00..............................................................61, 62
350-161-00....................................................................61
350-161-00..............................................................61, 62
360-100-00..................................................................101
360-110-00..................................................................101
360-120-00..................................................................101
360-210-00..................................................................101
360-220-00..................................................................101
360-230-00..................................................................101
360-240-00..................................................................101
360-250-00..................................................................101
360-260-00..................................................................101
360-270-00..................................................................101
360-280-00....................................................................66
360-280-00..................................................................101
360-300-00....................................................................66
360-400-00..................................................................101
360-401-00..................................................................101
360-402-00..................................................................101
360-405-00..................................................................101
360-406-00..................................................................101
128
360-410-00..................................................................101
360-500-00..................................................................101
360-501-00..................................................................101
360-502-00..................................................................101
360-600-00....................................................................66
360-602-00....................................................................66
360-604-00....................................................................66
360-606-00....................................................................66
360-608-00....................................................................66
360-610-00....................................................................66
360-612-00....................................................................66
360-614-00....................................................................66
360-616-00....................................................................66
360-618-00....................................................................66
360-622-00....................................................................66
381-133-00....................................................................46
381-137-00....................................................................46
381-142-00....................................................................46
381-148-00....................................................................46
381-155-00....................................................................46
381-233-00....................................................................46
381-237-00....................................................................46
381-242-00....................................................................46
381-248-00....................................................................46
381-255-00....................................................................46
381-333-00..............................................................47, 57
381-337-00..............................................................47, 57
381-342-00..............................................................47, 57
381-348-00..............................................................47, 57
381-355-00..............................................................47, 57
381-410-00....................................................................34
381-412-00....................................................................34
381-420-00....................................................................35
381-422-00....................................................................35
381-424-00....................................................................35
381-426-00....................................................................35
381-428-00....................................................................35
381-500-00....................................................................47
381-533-00....................................................................46
381-537-00....................................................................46
381-542-00....................................................................46
381-548-00....................................................................46
381-555-00....................................................................46
381-733-00....................................................................47
381-737-00....................................................................47
381-742-00....................................................................47
381-748-00....................................................................47
381-755-00....................................................................47
382-014-17....................................................................38
382-015-00........................................................38, 53, 55
382-020-09........................................................39, 53, 55
382-020-11........................................................39, 53, 55
382-020-13........................................................39, 53, 55
382-020-15........................................................39, 53, 55
382-020-17........................................................39, 53, 55
382-033-00........................................................38, 53, 55
382-033-11........................................................40, 53, 55
382-033-13........................................................40, 53, 55
382-033-15........................................................40, 53, 55
382-033-17........................................................40, 53, 55
382-037-00........................................................38, 53, 55
382-037-09........................................................40, 53, 55
382-037-11........................................................40, 53, 55
382-037-13........................................................40, 53, 55
382-037-15........................................................40, 53, 55
382-037-17........................................................40, 53, 55
382-042-00........................................................38, 53, 55
382-042-09........................................................40, 53, 55
382-042-11........................................................40, 53, 55
382-042-13........................................................40, 53, 55
382-042-15........................................................40, 53, 55
382-042-17........................................................40, 53, 55
382-048-00........................................................38, 53, 55
382-048-09........................................................40, 53, 55
382-048-11........................................................40, 53, 55
382-048-13........................................................40, 53, 55
382-048-15........................................................40, 53, 55
382-048-17........................................................40, 53, 55
382-055-00........................................................38, 53, 55
382-055-09........................................................40, 53, 55
382-055-11........................................................40, 53, 55
382-055-13........................................................40, 53, 55
382-055-15........................................................40, 53, 55
382-120-09....................................................................39
382-120-11....................................................................39
382-120-13....................................................................39
382-120-15....................................................................39
382-120-17....................................................................39
382-133-00....................................................................38
382-133-11....................................................................41
382-133-13....................................................................41
382-133-15....................................................................41
382-133-17....................................................................41
382-137-00....................................................................38
382-137-09....................................................................41
382-137-11....................................................................41
382-137-13....................................................................41
382-137-15....................................................................41
382-137-17....................................................................41
382-142-00....................................................................38
382-142-09....................................................................41
382-142-11....................................................................41
382-142-13....................................................................41
382-142-15....................................................................41
382-142-17....................................................................41
382-148-00....................................................................38
382-148-09....................................................................41
382-148-11....................................................................41
382-148-13....................................................................41
382-148-15....................................................................41
382-148-17....................................................................41
382-155-00....................................................................38
382-155-09....................................................................41
382-155-11....................................................................41
382-155-13....................................................................41
382-155-15....................................................................41
382-233-17........................................................42, 53, 55
382-237-17........................................................42, 53, 55
382-242-17........................................................42, 53, 55
382-248-17........................................................42, 53, 55
382-255-17........................................................42, 53, 55
382-320-09..............................................................48, 57
382-320-11..............................................................48, 57
382-320-13..............................................................48, 57
382-320-15..............................................................48, 57
382-333-00..............................................................48, 57
129
382-333-11..............................................................49, 57
382-333-13..............................................................49, 57
382-333-15..............................................................49, 57
382-337-00..............................................................48, 57
382-337-09..............................................................49, 57
382-337-11..............................................................49, 57
382-337-13..............................................................49, 57
382-337-15..............................................................49, 57
382-342-00..............................................................48, 57
382-342-09..............................................................49, 57
382-342-11..............................................................49, 57
382-342-13..............................................................49, 57
382-342-15..............................................................49, 57
382-348-00..............................................................48, 57
382-348-09..............................................................49, 57
382-348-11..............................................................49, 57
382-348-13..............................................................49, 57
382-348-15..............................................................49, 57
382-355-00..............................................................48, 57
382-355-09..............................................................49, 57
382-355-11..............................................................49, 57
382-355-13..............................................................49, 57
382-355-15..............................................................49, 57
382-433-00........................................................42, 53, 55
382-437-00........................................................42, 53, 55
382-442-00........................................................42, 53, 55
382-448-00........................................................42, 53, 55
382-455-00........................................................42, 53, 55
382-533-00..............................................................50 ,57
382-537-00..............................................................50 ,57
382-542-00..............................................................50 ,57
382-548-00..............................................................50 ,57
382-555-00..............................................................50 ,57
382-633-00....................................................................42
382-637-00....................................................................42
382-642-00....................................................................42
382-648-00....................................................................42
382-655-00....................................................................42
382-833-00..............................................................50 ,57
382-837-00..............................................................50 ,57
382-842-00..............................................................50 ,57
382-848-00..............................................................50 ,57
382-855-00..............................................................50 ,57
383-033-11....................................................................67
383-033-13....................................................................67
383-033-15....................................................................67
383-033-17....................................................................67
383-037-09....................................................................67
383-037-11....................................................................67
383-037-13....................................................................67
383-037-15....................................................................67
383-037-17....................................................................67
383-042-09....................................................................67
383-042-11....................................................................67
383-042-13....................................................................67
383-042-15....................................................................67
383-042-17....................................................................67
383-048-09....................................................................67
383-048-11....................................................................67
383-048-13....................................................................67
383-048-15....................................................................67
383-048-17....................................................................67
383-055-09....................................................................67
Index
383-055-11....................................................................67
383-055-13....................................................................67
383-055-15....................................................................67
384-110-00....................................................................68
384-112-00....................................................................68
384-114-00....................................................................68
384-116-00....................................................................68
384-120-00....................................................................69
384-122-00....................................................................69
384-124-00....................................................................69
384-126-00....................................................................69
384-130-00....................................................................76
384-210-00....................................................................68
384-212-00....................................................................68
384-214-00....................................................................68
384-216-00....................................................................68
384-220-00....................................................................69
384-222-00....................................................................69
384-224-00....................................................................69
384-226-00....................................................................69
384-230-00....................................................................84
384-310-00....................................................................68
384-312-00....................................................................68
384-314-00....................................................................68
384-316-00....................................................................68
384-320-00....................................................................69
384-322-00....................................................................69
384-324-00....................................................................69
384-326-00....................................................................69
384-330-00....................................................................92
384-910-00........................................................76, 84, 90
385-110-00....................................................................76
385-112-00....................................................................76
385-120-00....................................................................76
385-122-00....................................................................76
385-123-00....................................................................76
385-124-00............................................................76, 102
385-130-00....................................................................76
385-210-00....................................................................84
385-212-00....................................................................84
385-220-00....................................................................84
385-222-00....................................................................84
385-223-00....................................................................84
385-224-00............................................................84, 102
385-230-00....................................................................84
385-310-00....................................................................92
385-312-00....................................................................92
385-320-00....................................................................92
385-322-00....................................................................92
385-323-00....................................................................92
385-324-00............................................................92, 102
385-330-00....................................................................92
385-910-00........................................................76, 84, 90
385-912-00........................................................76, 84, 90
386-110-00....................................................................77
386-111-00....................................................................77
386-113-00....................................................................77
386-115-00....................................................................77
386-130-00....................................................................77
386-131-00....................................................................77
386-132-00....................................................................77
386-135-00....................................................................77
386-136-00....................................................................77
130
386-139-00....................................................................77
386-140-00....................................................................78
386-141-00....................................................................78
386-142-00....................................................................78
386-143-00....................................................................78
386-151-00....................................................................79
386-152-00....................................................................79
386-153-00....................................................................79
386-154-00....................................................................79
386-155-00....................................................................79
386-160-00....................................................................80
386-161-00....................................................................80
386-162-00....................................................................80
386-170-00....................................................................81
386-171-00....................................................................81
386-180-00....................................................................76
386-190-00....................................................................76
386-210-00....................................................................85
386-211-00....................................................................85
386-213-00....................................................................85
386-215-00....................................................................85
386-230-00....................................................................85
386-231-00....................................................................85
386-232-00....................................................................85
386-235-00....................................................................85
386-236-00....................................................................85
386-239-00....................................................................85
386-240-00....................................................................86
386-241-00....................................................................86
386-242-00....................................................................86
386-243-00....................................................................86
386-251-00....................................................................87
386-252-00....................................................................87
386-253-00....................................................................87
386-254-00....................................................................87
386-255-00....................................................................87
386-260-00....................................................................88
386-261-00....................................................................88
386-262-00....................................................................88
386-270-00....................................................................89
386-271-00....................................................................89
386-280-00....................................................................84
386-290-00....................................................................84
386-310-00....................................................................93
386-311-00....................................................................93
386-313-00....................................................................93
386-315-00....................................................................93
386-330-00....................................................................93
386-331-00....................................................................93
386-332-00....................................................................93
386-335-00....................................................................93
386-336-00....................................................................93
386-339-00....................................................................93
386-340-00....................................................................94
386-341-00....................................................................94
386-342-00....................................................................94
386-343-00....................................................................94
386-351-00....................................................................95
386-352-00....................................................................95
386-353-00....................................................................95
386-354-00....................................................................95
386-355-00....................................................................95
386-360-00....................................................................96
386-361-00....................................................................96
386-362-00....................................................................96
386-370-00....................................................................97
386-371-00....................................................................97
386-380-00....................................................................92
386-390-00....................................................................92
386-410-00........................................................78, 86, 94
386-412-00........................................................78, 86, 94
386-414-00........................................................78, 86, 94
386-416-00........................................................78, 86, 94
386-418-00........................................................78, 86, 94
386-420-00........................................................78, 86, 94
386-422-00........................................................78, 86, 94
386-426-00........................................................78, 86, 94
386-428-00........................................................78, 86, 94
386-444-00........................................................78, 86, 94
386-446-00........................................................78, 86, 94
386-512-00........................................................79, 87, 95
386-514-00........................................................79, 87, 95
386-516-00........................................................79, 87, 95
386-518-00........................................................79, 87, 95
386-520-00........................................................79, 87, 95
386-522-00........................................................79, 87, 95
386-524-00........................................................79, 87, 95
386-526-00..............................................................87, 95
386-528-00..............................................................87, 95
386-530-00........................................................79, 87, 95
386-532-00..................................................................103
386-534-00........................................................79, 87, 95
386-534-00..................................................................103
386-614-00........................................................80, 88, 96
386-616-00........................................................80, 88, 96
386-617-00........................................................80, 88, 96
386-618-00........................................................80, 88, 96
386-619-00........................................................80, 88, 96
386-620-00........................................................80, 88, 96
386-622-00........................................................80, 88, 96
386-624-00........................................................80, 88, 96
386-626-00........................................................80, 88, 96
386-712-00........................................................81, 89, 97
386-714-00........................................................81, 89, 97
386-716-00........................................................81, 89, 97
386-718-00........................................................81, 89, 97
386-720-00........................................................81, 89, 97
386-910-00........................................................77, 85, 93
386-912-00........................................................78, 86, 94
386-914-00........................................................77, 85, 93
386-916-00........................................................78, 86, 94
387-112-00..................................................................103
387-116-00..................................................................103
387-212-00..................................................................103
387-312-00..................................................................103
387-316-00..................................................................103
387-410-00....................................................................54
387-412-00........................................................52, 54, 56
387-413-00........................................................52, 54, 56
387-414-00....................................................................58
387-415-00......................................... 52, 54, 56, 59, 102
387-418-00....................................................................52
387-419-00....................................................................52
387-420-00....................................................................56
387-509-00..................................................................100
387-510-00......................................... 53, 55, 57, 59, 100
131
Notes
132
Notes
133
Notes
www.tioLogic.com
989-965-20
Printed by Dentaurum
Germany
06/11/C/R1-2
Subject to modifications
Date of information: 06/11