Você está na página 1de 72

CATALOGUE 2O13/ 14 EN

SINGING ROCK PROFESSIONAL

content

Equipment for work at height, military and rescue


SINGING ROCK is one of the world leaders on the market of professional protective equipment for work at heights, military and rescue. The range of equipment available includes harnesses, ropes, hardware, rappeling devices, safety equipment for heights, anchor points, life lines and sets for typical work situations. All of the high-performance and innovative products are developed and produced in Czech Republic. The products are certified and fully comply with the international industrial safety standards. Our products are innovative, modern and easy to use, with great strength and with maximum comfort...

Photo cover: Off-shore oil platform, Norway Photo: Bilder Photo this page: Helicopter Show 2011, Hradec Krlov, Czech Republic Photo: Borek Nechanick

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

icons
These icons will help you to choose the proper harness regarding the most common and most situable use: SINGING ROCK was founded in 1992. During 20 years of its existence, Singing Rock has established itself as a professional and innovative producer and supplier of personal fall protective equipment. Nowadays SINGING ROCK is one of the world leaders on the market of professional protective equipment for work at height, military and rescue. The range of equipment available includes harnesses, ropes, hardware, rappeling devices, safety equipment for heights, anchor points, life lines and sets for typical work situations. All of the high-performance and innovative products are developed and produced in Czech Republic, Europe. The products are certified and fully comply with the international industrial safety standards. Our products are innovative, modern and easy to use, with great strength and with maximum comfort... SINGING ROCK specializes in its production on: Development and production of climbing and mountaineering equipment (harnesses, mountaineering ropes, belay and rappel devices carabiners, helmepts, ice axes, crampons etc.) Development and production of professional equipment for working in height (harnesses, ropes, connectors, anchor devices, helmets, lanyards and fall absorbers) Methodology and preparation of rope access and secure anchor systems Supply or development of suitable safety equipment Training services Follow-up service - regular product inspection All activities at Singing Rock run under QMS certification according to ISO 9001 standards with special attention to development, production and sales of Personal Fall Protective Equipment. (Article 11B of Council Directive 89/686/EEC). SINGING ROCK products fulfil appropriate EU directives and standards and requirements of US market (CE, NFPA and ANSI). Singing Rock actively participates in preparation of these standards and directives by its work in the UIAA Safety Commission and CEN working group. SINGING ROCK also cooperates with Czech Standard Organization as an expert in the field of standards for personal protective equipment. SINGING ROCK simply has everything what you need for your Personal Protective Equipment to prevent falling (PPE) and for permanent fall protection.

work restraint

C R W F I P A
rope access rescue fall arest intervention rope park tree care

harnesses

Rock&Lock
patented smart buckle system Easy to lock and open: Only a small amount of finger pressure is needed to lock and to open. Fast lace-through: Make the loop, put it through the buckle frame, hook the loop on the cross bar and tighten. Its as easy as that. Smart function: Rock&Lock allows you to put on your harness very quickly Double safety: Webbing cannot slip through Rock&Lock due to a safety loop at the end of the webbing Spontaneous opening of Rock&Lock is virtually impossible. Lightweight and extra strong. Excellent operation in all-season conditions: Operation guaranteed even when webbing is wet or frozen.

SINGING ROCK makes harnesses which are very comfortable, simple to use and suitable for every working situation for workers at height. Thanks to the innovated technologies and smart solutions, SINGING ROCK can offer a full range of safety harnesses covering all areas of working applications. SINGING ROCK harnesses are exclusively manufactured in Czech Republic.

Easy-lock buckle
Smooth adjusting Unique buckle with a sliding captive bar matches strict American standards (ANSI, CSA). Its minimum strength is 17.2 kN. No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing). Corrosion resistance is tested by spraying in a salty chamber for a period of 48 hours.

SPEED buckle
1 second buckle SINGING ROCK SPEED buckle is the side quick release buckle. Easy operation Durable and adjustable Made from steel Matches strict American standard ANSI Impossible opening under the loading Impossible to lock when the strap is twisted Strap width up to 45 mm Black coated Strength 18 kN

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

Singing Rock - new dimension

harnesses

Attachment points for lowering

Narrowed padding and webbing around the neck enhance comfort

Elastic strap for holding shoulder webbing. Slots for carabiners EASY LOCK buckle with a captive bar matches strict American standards (ANSI, CSA). Its minimum strength is 17.2 kN. No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing). Corrosion resistance is tested by spraying in a salty chamber for a period of 48 hours.

Name tag + identification


Positioning D rings

Sleep (parking position)

Attachment points according EN 361. Steel D-rings with a bearing capacity of 15 kN.

Positioning points are placed in symmetrically according to EN 358, tested for 15 kN strength. Light alloy D-rings are movable into so-called parking position, thus avoiding undesired catching during work.

Work

HYPNOS key lock carabiner K0007 for connection of chest straps with waist belt.

Front and back attachment points meet the requirements of EN813.

Additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear management.

On the back: slots in the waist belt webbing provide secure points from which to hang heavy equipment (e.g. power saws, drills etc.) as well as slots for the Porter plastic carabiner.

Braided gear loops with a bearing capacity of 10 kg provide enough space for 10 pieces of HMS carabiners.

Anatomic leg loops padding

rope access

W0045BR W0045BB - black version

EXPERT II speed

CFIR

Fully adjustable and removable harness for a rope access with padded waist belt, leg loops and shoulder straps. Suitable for working positioning, fall arrest and work restraint situations. The Expert II harness is modular where it is possible to use only as a sit harness. innovated SPEED buckles enable fluent and fast adjustment to fit to users body shoulders straps are connected with the waist belt by screw carabiner and a buckle in a rear shoulder straps can be totally removed and the harness can be used only as a sit harness anatomic waist belt, leg loops and shoulder straps padding shoulders straps and leg loops are independently adjustable narrowed padding and webbing on the shoulder straps in a neck area enhance a comfortable work front and back attachment points for fall-arrest according to EN 361 front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 2 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. the leg loops construction insure enough comfort in bark area specially shaped waist loop and leg loops flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus identification and methodical label Size: S, M/L, XL Weight: (M/L) 2430 g ( 15 g) 85.72 oz (0,5 oz) CE 1019 EN 358 EN 813 EN 361 W0044BR W0044BB - black version

EXPERT II speed

EXPERT II standard

CFIR

standard easy-lock buckles enable fluent and fast adjustment Size: S, M/L, XL Weight: (M/L) 2130 g ( 15 g) 75.13 oz (0,5 oz) CE 1019 EN 358 EN 813 EN 361

W0070BR

EXPERT II steel speed

CFIR

innovated SPEED buckles enable fluent and fast adjustment to fit to users body the harness is made in an accordance with a strict American standards (NFPA, ANSI) corrosion resistance of all steel components is tested by spraying in a salty chamber for a periond of 48 hour Size: S, M/L, XL Weight: (M/L) 2730 g ( 15 g) 96.3 oz. ( 0,5 oz) CE 1019 EN 358 EN 813 EN 361 NFPA Class III ANSI Z359.1 EXPERT II steel speed EXPERT II standard black

rope access

harnesses

W0042BR W0042BB - black version

PROFI WORKER speed

CFIR

Fully adjustable harness for a rope access with padded waist belt, leg loops and shoulder straps. Suitable for work positioning, fall arrest and work restraint situation. innovated SPEED buckles enable fluent and fast adjustment to fit to users body anatomic waist belt, leg loops and shoulder straps padding narrowed padding and webbing on the shoulder straps in a neck area enhance a comfortable work front and back attachment points for fall-arrest according to EN 361 front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 2 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. the leg loops construction insure enough comfort in bark area specially shaped waist loop and leg loops flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus identification and methodical label Size: S, M/L, XL Weight: (M/L) 1720 g (15 g) 60.67 oz. (0,5 oz) CE 1019 EN 358 EN 813 EN 361 W0041BR W0041BB - black version PROFI WORKER speed

PROFI WORKER standard

CFIR

Fully adjustable and removable harness for a rope access with padded waist belt, leg loops and shoulder straps. Also suitable for work positioning, descent, ascent and rescue situations. standard easy-lock buckles enable fluent and fast adjustment Size: S, M/L, XL Weight: (M/L) 2030 g (15 g) 71.61 oz. (0,5 oz) CE 1019 EN 358 EN 813 EN 361

PROFI WORKER standard

PROFI WORKER standard black

rope access

W0058

SEAMASTER II

CR
back when carrying backpack or breathing apparatus easy fixing of cam clean ascender in vertical position is provided by stitched strap between lower front attachment point and front tie-in point Size: M/L, XL Weight: (M/L) 1700 g (15g) 60 oz. EN 358 EN 813 EN 361 CE 1019

Fully adjustable harness for a rope access with padded waist belt, leg loops and shoulder straps. Suitable for work positioning, fall arrest and work restraint situation. This harness is specially intended for the workers at the off-shore oil platforms. padded waist belt, shoulders and leg loops narrowed padding and webbing on the shoulderstraps in a neck area enhance a comfortable work back and front attachment points for fall-arrest according to EN 361 front lower attachment point for descender placement or work positioning according to EN 813 side attachment points for work positioning according to EN 358 3 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. the leg loops construction insure enough comfort in bark area the combination of standard and SPEED buckles enable fluent and fast adjustment to fit to users body flat rear attachment point does not bear on users

Cleaning the windows, Krkonoe National Park Service Department. Czech Republic Photo: Jan Zmenk

fall arrest

harnesses

W0051BR

ENERGETIC

CFR

W0063BB

TECHNIC standard

CFIR

W0048BR

EX-TEN
Support of the waist belt to increase comfort at a back area of worker in a height 7 mm thick padding. Foam with close pore does not absorb a water high density polyethylene creates support of the back and comfortable work lace webbing made from polyester with high abrasion resistance Size: S, M/L, XL Weight: 340 g (M/L) 11.99 oz

Fully adjustable full body harness specialy intended for the maximum comfort for work positioning and fall arrest. chest textile attachment point according to EN 361, EN 813, with bearing capacity of 15kN. dorsal attachment point according to EN 361. Steel D-ring with a bearing capacity of 15kN. 3 innovated SPEED buckles allow very easy putting on. positioning twisted system according to EN 358. positioning D ring divide load to the waist belt and to the bench. System allows rotation of the body in the harness. wide [18 cm] and solid waist belt. Combination of the foam and high density polyethylen. 4 braided gear loops with a bearing capacity 10 kg. rear plastic D rings with a bearing capacity 5kg. reinforcement of the bench is made from glass fiber. ideal harness for all who have to spend in a harness the hours or days. Size: M/L, XL Weight: 3350 g (M/L) (15 g) 118,2 oz CE 1019 EN 813 EN 358 EN 361

Fully ajdustable work positioning and fall arrest harness with easy-lock buckles. an attachment point for work in hanging position, rapelling according to EN 813 steel positioning points according to EN 358 are placed symmetrically. Steel D-rings are flat and settled on a padding. easy-lock buckles enable fluent and fast adjustment to fit to users body 2 braided gear loops with a bearing capacity of 10 kg slots designed for a secure hanging of expensive equipment (such as power saw, drilling machine,..) identification and methodical label slide buckle intended for chest ascender fastening chest attachment point according to EN 361 dorsal attachment point according to EN 361 Size: S, M/L, XL Weight: (M/L) 1620 g (15 g) 57.14 oz. (0,5 oz) CE 1019 EN 358 EN 813 EN 361 W0064BB

TECHNIC steel speed

CFIR

Fully adjustable full body harness for work positioning and fall arrest with the steel components and SPEED buckles. innovated steel SPEED buckles enable fluent and fast adjustment to fit to users body the harness is made in an accordance with a strict American standards (NFPA, ANSI) corrosion resistance of all steel components is tested by spraying in a salt chamber for a period of 48 hours steel positioning points according to EN 358 are placed symmetrically. Steel D-rings are flat and settled on a padding. Size: S, M/L, XL Weight: (M/L) 2450 g (15 g) 86.42 oz. (0,5 oz) CE 1019 EN 358 EN 813 EN 361 NFPA Class III ANSI Z359.1

rope park

W0050BR

TARZAN

Fully adjustable full body harness intended for rope courses and adventure parks attachment point for work in hanging position, rappelling according to EN 813. anatomic waist belt and leg loops padding speed buckle connecting shoulder straps with waist belt. Increased comfort when putting the harness on. buckle with a captive bar matches strict American standards (ANSI, CSA). Its minimum strength is 17.2 kN. No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing).Corrosion resistance is tested by spraying in a salty chamber for a period of 48 hours. Shoulder webbing has different colour for easy manipulation Left leg loops with red colour inside helps to put the harness on Different colour of rear plate for each size. Dorsal attachment point according EN 361. Steel D-ring with a bearing capacity of 15 kN. This D-ring is flat and settled on a padding. Webbing strap stitched in the buckle simplify handling with buckle. Size: XS - S, M - XL Weight: 1530 g (M - XL) 15 g 54 oz CE 1019 EN 813 EN 361

C5036BR00

TARZAN light

Fully adjustable full body harness intended for rope courses and adventure parks front attachment point for belaying and rappeling according to EN 12277 type C easy to put on anatomic waist belt and leg loops speed buckle enables to put on the harness easily buckle with a captive bar matches strict American standards (ANSI, CSA). No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and toughwebbing). Size: UNI Weight: 990 g 15 g 34,9 oz CE 1019 EN 12277

10

chest

harnesses

W0320SY W0320BB - black version

BODY

FWP

Fully adjustable fall-arrest harness with two attachment points in accordance with EN 361. Intended for working in places with the risk of fall. Harness is compact and light-weight, thus suitable for horizontal or inclined planes. It allows temporary hanging in. Size: S, M/L, XL Weight: 1050 g (M/L) 37 oz CE 1019 EN 361

C1010BR C1010BB - black version

BOBINGO
Chest harness designed to be used together with a sit harness, optimising body position while hanging or falling. Do not use chest harness alone! Size: UNI Weight: 240 g ( 15 g) 8,5 oz ( 0,5 oz) CE 1019 EN 12277

W0200SY W0200BB - black version

RL CHEST
Fully adjustable chest harness It is certified in a combination with SIT WORKER as a full body fall-arrest harness according to EN 361. Use only in combination with a sit harness! Size: UNI Weight: 600 g 21,2 oz

11

sit

W0067BR W0067BB - black version

SIT WORKER II speed

CIR

Fully adjustable sit harness with innovated SPEED buckles for work positioning The new design of this sit harness is subsidized by perfect functionality, comfort and lightness. Intended for all vertical activities without any risk of the fall. Large gear loops and inovated SPEED buckles make from SIT WORKER ideal harness for every day users. side attachment points for work positioning according to EN 358 front lower attachment point for descender placement or work positioning according to EN 813 2 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. wide padding provides a rich back support Size: S, M/L, XL Weight: (M/L) 1450 g (15 g) 51.15 oz. (0,5 oz) CE 1019 EN 358 EN 813

SIT WORKER II speed

W0065BR W0065BB - black version

SIT WORKER II standard

CIR

Fully adjustable sit harness with easy-lock buckles for work positioning. 2 braided gear loops with a bearing capacity of 10 kg wide padding provides a rich back support side attachment points for work positioning according to EN 358 easy-lock buckles provides fast adjustment to fit the users body Size: S, M/L, XL Weight: 1130 g (15 g) 39.86 oz CE 1019 EN 358 EN 813

SIT WORKER II standard black

W0066BR

SIT WORKER II steel speed


Fully adjustable sit harness for work positioning with the steel components and SPEED buckles innovated SPEED buckles enable fluent and fast adjustment to fit to users body the harness is made in an accordance with a strict American standards (NFPA, ANSI) corrosion resistance of all steel components is tested by spraying in a salty chamber for a periond of 48 hours 2 braided gear loops with a bearing capacity of 10 kg wide padding provides a rich back support side attachment points for work positioning according to EN 358 Size: S, M/L, XL Weight: 1590 g (15 g) 56.09 oz CE 1019 EN 358 EN 813 NFPA Class II ANSI Z359.1 SIT WORKER II steel speed

CIR

12

sit

harnesses

W0022BR W0022BB - black version

URBAN II

CIR

Sit harness for work positioning anatomic waist belt and leg loops padding perfectly fits to man anatomy textile attachment point for work in hanging position, rappelling according to EN 813. textile positioning points according to EN 358 are placed symmetrically, tested for 15 kN strength. 2 braided gear loops with a bearing capacity of 10 kg provide enough space for 10 pieces of HMS carabiners. additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. slots designed for a secure hanging of expensive equipment (such as power saw, drilling machine,..) identification and methodical label. To prolong its lifetime is advised to hide this label under the webbing. Size: S, M/L, XL Weight: M/L 850 g (15g) 30 oz CE 1019 EN 358 EN 813

W0021BB

STRIKE

Working sit harness intended for special forces padded waist belt (detachable) and leg loops front attachment point (made of textile) for descender placement 2 big gear loops the leg loops construction insure enough comfort in bark area innovated SPEED buckles enable fluent and fast adjustment to fit to users body freedom of movement Size: S, M, L, XL Weight: 580g (M) 20,5 oz CE 1019 EN 813

W0030BB

POLE
Belt for work positioning one gear loop possibility of gear bag connection R&L buckles light-weight symmetrically positioned attachment points padded with good firm foam Size: S, M/L, XL Weight: 450 g (M/L) 15,9 oz CE 1019 EN 358

13

arboriculture

W0061BR

TIMBER II
Work positioning harness presenting a perfect choice for arborists

A
W0070RR00

innovated anatomic waist belt and leg padding perfectly fits man anatomy removable and exchangable bridge connecting the leg loops adjustable sliding D-ring enables you to take safe, comfortable and effective work position wide and stiff padding offers great comfort when hanging in the harness side D-rings for work positioning EN 358 or gear attachment 4 gear loops with a bearing capacity of 10 kg provide enough space for your gear. additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. waist belt construction allows to attach First Aid Kit and plastic holders for industrial tools (PORTER). Size: M/L, XL Weight: 1800g, 1950 g 63,5 oz, 68,8 oz CE 1019 EN 358 EN 813

TIMBER BRIDGE
Replacement connecting loop Material: polyamide Width: 20 mm Length: 32.5 cm Weight: 37 g

W1040R - steel ring W1041R - ALU ring W1042R - without ring

JINGLE II
Cambium saver intended for use in tree climbing as anchor device and belay anchor. The different size of the rings enables easy and quick installing and removing of the sling from the ground. As well suitable in industry as an anchor device. length of the slings with "O" ring - 100, 120, 150 cm strength 25 kN inside and outside diameter of "O" rings: big 46/70 mm, small 28/52 mm 3 layers of webbing sewn together red colour of webbing for better visibility available with aluminium "O" rings or without "O" rings. CE 1019 EN 795B

W9500Y

TREEMOUSE
Arboristic throwing bag for tree climbing situable for installation of the anchor point in a treetop using cambium saver (JINGLE) used for dropping small branches down from the tree top situable for installation of the working rope to the places with comlicated access material: high endurance synthetic fabric PES steel welded ring of 3 cm in diameter polyamid webbing colour: yellow, red, orange TREEMOUSE 300 300 g/yellow code: W9500Y300 TREEMOUSE 350 350 g/red code: W9500Y350 TREEMOUSE 400 400 g/orange code: W9500Y400

14

rescue & accessories

harnesses

W0005YBO9 W0005BB09 - black version

LAIKA

IR

Dog harness intended for transport of the dog from a helicopter side light-alloy reinforcements easy and quick fastening with velcro max. load 150 kg Size: UNI

W0010YB W0010BB - black version

FRANKLIN
Work positioning seat provides more comfort when hanging in the harness. It is intended for use with our fall arrest or work positioning harnesses. It is easy to adjust with Rock&lock buckles. Wide sitting area ensures good stability and allows comfortable hanging as well as standing work position. Suspension straps do not press on your thighs. Three D-rings (bearing capacity 50 kg) for vessel or other gear suspension. Max. load of seat: 250 kg Weight: 1650 g 58.2 oz.

W8200BY

EVACUATION TRIANGLE SIT

W8210BY

EVACUATION TRIANGLE COMBI

Evacuation triangle for a person to rescue from a chair lift or a cable car. chest plastic buckle for easy putting on the triangle durable steel attachment points easy to put on and take off Only for rescue purposes. Size: UNI EN 1498, CE 1019

Evacuation triangle with shoulder straps for a person to rescue from a chair lift or a cable car special shoulder straps for better fixing a person in evacuation triangle straps are made from different color for better attachment management durable steel attachment points easy to put on and take off Only for rescue purposes. Size: UNI CE 1019 EN 1497 EN 1498

15

harnesses

type of buckles EXPERT II standard

black version code yes yes yes yes yes yes no no no yes yes yes yes yes yes W0044BR02 W0044BR03 W0044BR05 W0045BR02 W0045BR03 W0045BR05 W0070BR02 W0070BR03 W0070BR05 W0041BR02 W0041BR03 W0041BR05 W0042BR02 W0042BR03 W0042BR05

size S M/L XL S M/L XL S M/L XL S M/L XL S M/L XL

weight M/L waist [cm/in] [g] 2130 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51

leg loops [cm/in] 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29

height [cm] 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205

speed

2430

steel speed

2730

PROFI WORKER

standard

1720

speed

2030

SEAMASTER II

mix

no no

W0058BR03 W0058BR05

M/L XL

1700

75-100 / 29-39 85-130 / 33-51

50-75 / 19-29 50-75 / 19-29

160-180 175-205

ENERGETIC

mix

no no

W0051BR03 W0051BR05

M/L XL

3350

80-110/31-43 100-130/39-51

50-75/20-29 50-75/20-29

160-180 175-205

TECHNIC

standard

yes

W0063BB02 W0063BB03 W0063BB05 W0064BB02 W0064BB03 W0064BB05

S M/L XL S M/L XL

1620

55-80/22-31 75-100/29-39 85-130/33-51 55-80/22-31 75-100/29-39 85-130/33-51

45-60/18-24 50-75/20-29 50-75/20-29 45-60/18-24 50-75/20-29 50-75/20-29

150-170 160-180 175-205 150-170 160-180 175-205

speed steel

yes

2450

TARZAN

mix

no no

W0050BR01 W0050BR02

XS-S M-XL

1530

50-80 / 20-31 70-130 / 27-51

45-60 / 18-24 50-75 / 19-29

145-165 160-205

16

harnesses

type of buckles TARZAN LIGHT standard

black version code no C5036BR

size UNI

weight M/L waist [g] [cm/in] 990 60-130/24-51

leg loops [cm/in] 35-70/14-27

height [cm] 150-200

BODY

mix

yes yes yes

W0320BR02 W0320BR03 W0320BR05

S M/L XL

1050

150-170 160-180 175-205

BOBINGO

double buckle

yes

C101

UNI

240

RL CHEST

RL buckle

yes

W0200SY

UNI

chest max. 125/49

SIT WORKER II

standard

yes yes yes yes yes yes no no no yes yes yes

W0065BR02 W0065BR03 W0065BR05 W0067BR02 W0067BR03 W0067BR05 W0066BR02 W0066BR03 W0066BR05 W0022BR02 W0022BR03 W0022BR05

S M/L XL S M/L XL S M/L XL S M/L XL

1130

55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 85-130 / 33-51

45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29

speed

1450

steel speed

1590

URBAN II

standard

850

STRIKE

speed

yes yes yes yes

W0021BB02 W0021BB03 W0021BB04 W0021BB05

S M L XL

580

60-80 /24-31 70-90 / 28-35 80-100 / 31-39 90-110 / 35-39

50-55 / 20-22 55-60 / 22-24 60-65 / 24-26 65-70 / 26-28

POLE

RL buckle

yes yes yes no no

W0030BR02 W0030BR03 W0030BR05 W0061BR03 W0061BR05

S M/L XL M/L XL

450

55-80 / 22-31 75-100 / 29-39 85-130 / 33-51 70-100 / 28-39 85-130 / 33-51 50-65 / 20-25 55-75 / 22-29

TIMBER II

mix

1800

17

ropes
Excellent static ropes of different diameters are intended for rescuing the injured, manipulation with objects and rope access methods for work at a height. They meet the most exacting requirements, especially the best quality, that the rescuers, firemen, specialists in working at a height and other professionals require when working every day. SINGING ROCK dynamic ropes are the only ones in the world manufactured with a licence for the DuPont TEFLON fabric protector. The ropes protected with a layer of TEFLON are distinguished by their resistance to water and abrasion. TEFLON also effectively prevents the penetration of dust particles into the structure of the ropes and thus increases their service life and your safety! Why do you need resistance to water and abrasion? Maximum water and abrasion resistance are among the most important requirements when choosing the correct rope. Each dynamic rope is exposed to the affects of moisture and abrasion during its use both of these factors have a huge influence on the climbers safety.

Thermotransfer
Thermotransfer of the label on all Singing Rock ropes. Thermo-transfer is a special plastic label applied to the rope sheath by using heat and pressure. This label is durable, does not peel off and the rope ends are not wider which can cause the rope end get caught up (for example in rappel stations, etc).

Ultrasonic
an excellent system for rope ends Our own special technology has been used for the ends of the rope. All SINGING ROCK rope ends are done with a unique technology called ULTRASONIC, which means that the load-bearing core and the protective sheath are joined into a compact unit on the last 15 mm of the rope

Route 44
experience the touch of the future Route 44 is a unique technology invented and patented by Singing Rock. It opens new horizons for the braiding of climbing and static ropes. Route 44 technology allows blending of rope features that were previously considered impossible. Using the Route 44 technology, rope braiding is more compact, softer and above all, creates more durable than conventional rope. These combined features give you a better rope than others.

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

static

ropes

STATIC R44 10.5


L0430WR white L0430RR red L0430BB black L0430KK khaki CE 1019 EN 1891 UIAA NFPA

STATIC R44 11.0


L0450WG white L0450RR red L0450BB black L0450OO orange CE 1019 EN 1891 UIAA NFPA

STATIC 10.5
L0230WR white L0230RR red L0230BB black L0230KK khaki CE 1019 EN 1891 UIAA

STATIC 11.0
L0250WR white L0250RR red L0250BB black CE 1019 EN 1891 UIAA NFPA

STATIC 9.0
L0220WR white L0220BB black CE 1019 EN 1891 UIAA

L026

CONTRA 10.5
static rope Excellent static rope s intended for rescuing the injured, manipulation with objects and rope access methods for work at a height. It meets requirements that the rescuers, firemen, specialists in working at a height and other professionals require when working every day. Ultrasonic ending Thermotransfer end marking pack 50, 60, 70 m, coil 100, 200 m, or the lenght on customers request CE 1019 EN 1891 UIAA

19

dynamic

L0384

L0324

L036

ICON 9.3 Dry


extremely light and robust; it is ideal for hard routes onsight, flash or redpointing were every gram counts. with our special TEFLON treatment Icon 9.3 is ideal for rock climbing, pumpy routes and extreme ascents in the mountains. We have used the latest technologies and knowledge of our Research & Development department. Teflon is applied on the ropes by revolutionary nanotechnology. SBS gives the rope better properties. Every streak of the sheath is guided individually, not in a pair as usual. The sheath is more resistant against breakage, but on the other hand it is smoother. Treatment TEFLON Thermotransfer labeling Middle marking Ultrasonic ending CE 1019 EN 892 UIAA

GLORY 9.8 Dry


Single mountaineering rope produced on a 44carrier machine (Singing Rock's patented technology). This unique technology gives the rope great handling characteristics, compactness, low-weight and durability. Easy to knot and untie, as well. All technical parameters are in balance with each other, giving Glory 9.8 mm great handling characteristics. The rope is compact, which allows for minimal inter-fiber fiction, and results in a round crosssection. The rope is durable and comfortable Thermotransfer labeling Middle marking Ultrasonic ending TEFLON treatment CE 1019 EN 892 UIAA

SCORE 10.1
Single mountaineering rope produced on a 44carrier machine (Singing Rock's patented technology). Top quality product with balanced parameters. Rope is durable and comfortable. Thermotransfer labeling Middle marking Ultrasonic ending CE 1019 EN 892 UIAA

L038

L032

ICON 9.3
Thermotransfer labeling Middle marking Ultrasonic ending CE 1019 EN 892 UIAA

GLORY 9.8
Thermotransfer labeling Middle marking Ultrasonic ending CE 1019 EN 892 UIAA

www.singingrock.com
20

dynamic

ropes

L034

L051

L302

DURAN 10.4
Made with Singing Rocks patented R44 technology, the rope has a well balanced weight and diameter. All parameters are in balance with each other. Therefore, its very compact, durable and comfortable. Impact force and number of falls are standard. the main feature of this rope is its thicker sheath which is highly abrasion resistant. The rope has good handling characteristics and is suitable for use with most belaying devices. Ideal for areas with rough rocks, as well as for indoor climbing Thermotransfer labeling Middle marking Ultrasonic ending CE 1019 EN 892 UIAA

ACCORD 8.3
compact rope which has minimal interfiber friction, thereby increasing durability. tested and certified according to the EN 892 standard requirements for half ropes and twin ropes. weight, diameter and number of falls are balanced in such a way that Accord 8.2 can be used as both a half and twin rope. used in pairs, the climber can choose between the twin rope technique or half rope technique. Whatever technique is required at the time. Thermotransfer labeling Ultrasonic ending CE 1019 EN 892 UIAA

GEMINI 7.9
tested and certified according to EN 892 standard requirements for half ropes and twin ropes. lightweight and all parameters are in balance with each other, allowing many types of use: Ice climbing and mixed routes, glaciers and mountaineering. TEFLON is applied on the ropes by revolutionary nanotechnology. quality without compromise. TEFLON treatment Thermotransfer labeling Ultrasonic ending CE 1019 EN 892 UIAA

Teflon
permanent dry Selected SINGING ROCK ropes are produced with a DuPontTM TEFLON fabric protector license. Ropes protected by a TEFLON layer have extraordinary water and abrasion resistance. The TEFLON layer also effectively prevents the intrusion of dust particles into the rope structure, thereby increasing its lifespan.

Middle marking
Mid-length of the rope is visibly marked by a dark color band, which does not affect the core structure and its sheath.

Special Teflon
The rope is protected with a very stable organic resin based on organic fluoridated polymers. The resulting protective film reduces the surface energy of the textile material

so much that it not only repels water, but fatty substances as well. It also prevents the penetration of dust particles into the internal structure of the rope, protecting the inside of the rope from damage. The TEFLON layer gives our ropes superior properties for use, especially in damp or abrasive environments where ordinary ropes are vulnerable to serious damage. So, dynamic ropes with Ein, zwei, dry finishing have higher safety and longer life than ever before.

21

special

MILITARY: This collection of static ropes has been specially prepared for the use of police and army strike forces and other special units. If you require the best quality and a special design, MILITARY ropes are the best choice.

STATIC R44 10.5


L0430BB black L0430KK khaki CE 1019 EN 1891 NFPA UIAA

STATIC R44 11.0


L0450BB black CE 1019 EN 1891 NFPA UIAA

STATIC 11.0
L0250BB black CE 1019 EN 1891 NFPA UIAA

STATIC 10.5
L0230BB black L0230KK khaki CE 1019 EN 1891 UIAA

W2500 - 2 eyes W2520 - 1 eye

STITCHED EYE
strength knot breaking force strength with the knots elongation max. impact force sheath slippage shrinkage diameter material number of falls 30 kN 18 kN 15 kN/3 min. 3,2 % 6 kN 0 mm 3% 11 mm PA 50

weight: 79 g/m lenghts on customer's request colors: black, white EN 1891 CE 1019

22

speleo & accessory

ropes

L0440WR

SPELEO R44 10.5


L0240WR

SPELEO 10.5
CE 1019 EN 1891 UIAA

W2608 W2610

TIMBER ACCESSORY CORD


with sewn eyes rope diameter 8 and 10 mm the use of the PES/TECHNORA material combination results in a better thermal and mechanical resistance of the sheath. Length: diameter 8 mm - 75, 80, 85, 100 cm diameter 10 mm - 80, 85, 90, 100 cm CE 1019 EN 795B

L0041 - L0081

ACCESSORY CORD
Suitable for a multitude of uses, SINGING ROCK accessory cords are strong and supple. easy handling strong multitude of uses Diameters: 4, 5, 6, 7 and 8 mm CE 1019 EN 564 UIAA

23

rope accessories

W8100B

ROPE PROTECTOR
Protects rope sheath against abrasion on rough. 50/70/100/120 cm 20/28/40/48 in Material: PVC Colour: mix colours

C0001BB

ROPE BAG
With removable sheet. sheet dimensions 137 x 137 cm hidden pocket for keys and money. well-padde shoulder straps abrasion resistant material Weight: 620 g W1027B

W001800

PANCAKE
Designed to improve hauling systems and to make an ascent along the rope easier. Part of tackle systems: prevents from getting prusik knot into the pulley ideal for hauling in bigwalls and during rescue actions Ascending along a fixed rope: prusik knot moves upwards without hand intervention ATTENTION: Pancake itself doesnt ensure safety of prusik knot. Strength of prusik knot depends on parameters of both cord and rope! Size: UNI Weight: 15 g 0,53 oz.

DEFENDER
Protects rope sheath against abrasion on rough surfaces and edges. Allows to put 2 ropes in. 80/120 cm 32/48 in Material: Cortex

W1001BB

X0004GB

URNA
Leg rope bag for rappeling in the extreme conditions to have the rope under the control can be also used as a tool bag when working at the heights easy to put on the users leg and the harnesses with the plastic buckle made from high quality material max. length of the rope 50 m of the diameter 11,5 mm inside loop to tie the end of the rope easy closing system allows to feed the rope slowly the bag can be completely closed to avoid loosing the tools side pocket for small items or for the notebook Color: black Weight: 240 g ( 15 g) 8.5 oz ( 0.5 oz) Capacity: 11 litres

THERMOCUTTER
Ideal machine for cutting the ropes and accessory cords. Compact hand-held. The blade heats quickly. For save and fast cutting the ropes.

E0015XX

ROPEMARKER
When you need to mark your rope, use SINGING ROCK Rope Marker with dark ink and easy-to-use design, you'll never be left wondering in those unsure situations when the middle marking fades you can mark it again with this specially formulated rope marker you can mark the center of ropes or any other part of the harness or sling. For use with: PA, PP, PES, PE.

24

ropes

dynamic ropes
code Icon dry Icon Glory dry Glory Score Rave Duran Accord L0384RX L0380RX L0324BY L0320YB L0360GG L0330RS L0340AX L0510 L0510 Gemini L3020 L3020 CE EN 892 UIAA colour red red yellow yellow green red blue blue yellow red yellow length* m 30 80 30 80 30 80, 100, 200 30 80, 100, 200 30 60, 80, 100, 200 30 70, 100, 200 30 60, 80, 100, 200 30 70, 100, 200 30 70, 100, 200 30 70, 100, 200 30 70, 100, 200 diameter weight mm g/m 9,3 57 9,3 57 9,8 62 9,8 62 10,1 66 10,3 66 10,4 70 8,3 43 8,3 43 7,9 39 7,9 39 static elong. 9,0% 9,0% 7,9% 7,9% 7,0% 7,7% 6,00% 9% / 6,4% 9% / 6,4% 8% /7,3% 8% /7,3% dynamic elong. 33,9% 33,9% 36,3% 36,3% 31,9% 32% 31,3% 32% / 34% 32% / 34% 33% / 29% 33% / 29% falls impact force kN 5 8,4 5 8,4 6 8,9 6 8,9 8 9,1 7 9,3 10 8,7 1.5.2015 5,9 / 9,7 1.5.2015 5,9 / 9,7 1.5.2016 5,7/8,3 1.5.2016 5,7/8,3 type single single single single single single single half / twin half / twin half / twin half / twin

packaging dynamic ropes: pack - 30, 40, 50, 60, 70, 80, 100 m coil - 200 m

accessory cords
code L0041 L0051 L0061 L0071 L0081 CE 1019 EN 564 UIAA diameter mm 4 5 6 7 8 weight g/m 11,8 17,1 22,0 33,7 45,2 strenght kN 5 6 8 12 15 length m 100 100 100 100 100 ft 328 328 328 328 328

static ropes
Static R44 10.5 Static R44 11.0 Static 9.0 Static 10.5 Static 11.0 Stitched eye CE EN 1891 UIAA strenght knot breaking force static elongation kN kN % L0430 35,8 22,3 3,4 L0450 34,7 20,3 3,2 L0220 25,5 14,5 3,5 L0230 30,6 19,3 3,3 L0250 37,8 24 3,3 W25 30 18 3,2 packaging static ropes: pack - 30, 40, 50, 60, 70, 80, 100 m coil - 100, 200 m code number of falls >15 >20 >8 >10 >20 >20 weight g/m 72 77 52 69 80 79 type A A B A A A

speleo ropes
speleo R44 10,5 speleo 10,5 CE EN 1891 UIAA strenght knot breaking force static elongation kN kN % 35,6 22,1 3,4 29,2 18 3,3 packaging speleo ropes: pack - 30, 40, 50, 60, 70, 80, 100 m coil - 100, 200 m number of falls >15 >10 weight g/m 72 69

Some notes: Type A rope - low stretch kernmantel rope designed for general use by persons in rope access including all kinds of work positioning and restraint; in rescue and in caving Type B rope - low stretch kernmantel rope of a lower performance than type A ropes, requiring greater care in use (standard does not content other specification)

Static strength defined in the standard: 22 kN for the ropes of type A 18 kN for the ropes of type B Another standard requirement says, the material used for rope production shall have the melting point higher than 195C, so polyethylene or polypropylene are not suitable for the production of the ropes.

Rope elongation The rope elongation shall not be higher than 5%, tested by loading the rope for 3 min with 150kg load (pretension 50 kg) Dynamic performance Fall test with two meters long rope terminated with figure-eight knots; fall factor 1. The testing mass 100 kg for type A ropes, 80 kg for type B ropes.

25

connectors

Key-lock
for easy manipulation Key lock is an extremely simple and ingenious locking system that solves the problems associated with the traditional design of carabiners. It eliminates any risk of ropes or slings becoming entangled in the gate or in the carabiner nose when it is being connected or released. Neither the gate, which is completely cylindrical, nor the nose has any sharp edges. Ropes and slings do not, therefore, come into the contact with any cutting edges.

Hot forging
The latest technology in manufacturing carabiners is when the aluminum alloy is heated to reach a plasticized state when being forged into the final shape. This allows the metal to be formed more easily so it can be moved to areas where it is needed and removed from the areas where it is not needed. In comparison with cold forged binners, the hot forged binners are lighter, more durable and stronger.

Unique production number


identification of metal parts For better traceability and inspection recording the Singing Rock metal parts are marked with the unique production number. Singing Rock metal parts marked with the unique production number are in this catalogue indicated with text "unique production number".

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

steel

connectors

K4080ZO

D STEEL CONNECTOR / screw


with screw gate, key lock, zinc plated 50 kN 13 kN 20 kN gate opening (d) 25 mm 255 g 9 oz. unique production number CE 1019 EN 362

K4081ZO

D STEEL CONNECTOR / triplelock


with triplelock gate, key lock, zinc plated 50 kN 13 kN 20 kN gate opening (d) 25 mm 267 g 9 oz. unique production number CE 1019 EN 362

K4241ZO05

OVAL STEEL CONNECTOR / screw


with screw gate, key lock, zinc-plated 30 kN 9 kN 8 kN gate opening (d) 18 mm 176 g 6,21 oz unique production number CE 1019 EN 362

K4241ZO07

OVAL STEEL CONNECTOR / triplelock


with key lock and triplelock gate 30 kN 9 kN 8 kN gate opening (d) 18 mm 195 g 6,9 oz. unique production number CE 1019, EN 362

STEEL CONNECTORS designed for industrial use oval connector is ideal for pulleys, tackles, ascenders or descenders key lock nose (except rotating hangers) unique production number zinc plated surface individually tested up to 10 kN (D steel connectors up to 15 kN) Material: steel

WIRE ANCHOR
gate opening: K70908PO (d) 80 K70910PO (d) 100 K70914PO (d) 140 Ideal for constructions or towers where the large gate opening is necessary. Stainless steel 350 g (K70910PO) CE 0333 EN 362

steel maillons

K82006Z K82006B - black matt

K82008Z K82008B - black matt

K82207Z K82207B - black matt

K82310Z K82310B - black matt

K82210Z K82210B - black matt

MAILLON MINI OVAL


D 6 mm 4 kN gate opening 7,5 mm zinc-plated 33 g

MAILLON SMALL OVAL


D 8 mm 35 kN gate opening 11 mm zinc-plated 77 g CE 0082 EN 12275 EN 362

MAILLON SMALL DELTA


D 7 mm 4 kN gate opening 11 mm zinc-plated 60 g

MAILLON BIG D
D 10 mm 45 kN gate opening 12 mm zinc-plated 144 g CE 0082 EN 12275 EN 362

MAILLON BIG DELTA


D 10 mm 45 kN gate opening 12 mm zinc-plated 151 g CE 0082 EN 12275 EN 362

27

light alloy

Ozone carabiners Ozone has been designed to be used with pulleys, ascenders and descenders: its almost oval shape makes the carabiner easy to turn around in slings or belay station as well..

K0016AA00 K0016BB00 - black matt

K0015EE00

OZONE / screw

LARGO / triple lock

Oval carabiner, key lock, screw gate 26 kN 10 kN 7 kN gate opening (d): 21 mm 80 g (2,82 oz.) CE 1019 EN 362 EN 12275

Light alloy connector with triple lock gate and HMS shape. Class B large opening key-lock shape suitable for HMS belaying unique production number 22 kN 8 kN 8 kN gate opening (d) 30.5 mm 104 g 3.67 oz. CE 1019 EN 362

K0017AA00 K0017BB00 - black matt

K0014EE00

OZONE / TWL

LARGO / screw

Oval carabiner, key lock, twist lock 26 kN 9 kN 7 kN gate opening (d): 21 mm 85 g (3 oz.) CE 1019 EN 362 EN 12275

Light alloy connector with screw gate and HMS shape. Class B large opening screw gate key-lock shape suitable for HMS belaying unique production number 22 kN 8 kN 8 kN gate opening (d) 30.5 mm 100 g 3.53 oz. CE 1019 EN 362

K0018AA00 K0018BB00 - black matt

K5070PP

OZONE / triple lock

Oval carabiner, key lock, triple lock 26 kN 9 kN 7 kN gate opening (d): 21 mm 85 g (3 oz.) CE 1019 EN 362 EN 12275

D BIG CONNECTOR SCREW GATE


polished 30 kN 8 kN 9 kN gate opening (d) 26 mm 88 g unique production number CE 0639 EN 362 EN 12275

K0010BB00

EXTASY / bent
Robust, universal carabiner with bent gate for easy rope clipping. key lock, anodized 25 kN 8 kN 10 kN gate opening (d) 20 mm 47 g 1,65 oz. CE 1019 EN 12275 UIAA

K0011BB00

EXTASY / straight
Robust, universal carabiner with key lock for easy clipping on gear loops and effortless handling. key lock, anodized 25 kN 8 kN 10 kN gate opening (d) 20 mm 47 g 1,65 oz. CE 1019 EN 12275 UIAA

28

light alloy

connectors

K0012EE00 K0012BB00 - black matt

EXTASY / screw

Our smallest screw carabiner for all vertical activites. For better gear management the gates are in different colors. With screw gate, key lock, anodized 25 kN 8 kN 10 kN gate opening (d) 17 mm 52 g 1,82 oz. unique production number CE 1019 EN 12275 EN 362 UIAA

K0007EE00 K0007BB00 - black matt

HYPNOS / screw

Light and compact HMS carabiner for belaying mnter hitch or with tube. For better gear management the gates are in different colors. With screw gate, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm 71 g 2,49 oz. unique production number CE 1019 EN 12275 EN 362 UIAA

K0008EE00 K0008BB00 - black matt

HYPNOS / TWL

Light and compact HMS carabiner for belaying mnter hitch or with tube. For better gear management are gates in different colors. With twist lock, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm 75 g 2,63 oz. unique production number CE 1019 EN 12275 EN 362 UIAA

K0019EE00 K0019BB00 - black matt

HYPNOS / triple lock


Light and compact HMS carabiner for belaying by mnter hitch or with other devices. with triple lock, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm 75 g 2,63 oz. CE 1019 EN 12275 EN 362 UIAA

29

light alloy
K3702PP K3690ZO steel version

SMALL CONNECTOR
with double trigger automatic locking gate opening 21 mm 25 kN polished, Al 150 g unique production number CE 0333 EN 362 K4280PP

K3536201

BIG CONNECTOR
with double trigger automatic locking gate opening 60 mm 25 kN polished, Al 450 g unique production number CE 0333 EN 362

D BAR CARABINER / screw gate


with screw gate and captive bar, polished 30 kN 9 kN 11 kN gate opening (d) 19 mm 76 g unique production number CE 0333 EN 362 EN 12275 K4290PP

K3550PP

CONNECTOR GIGA
with double trigger automatic locking gate opening 110 mm 25 kN polished, Al 965 g unique production number CE 0333 EN 362

D BAR CARABINER / twist lock


with twist lock and captive bar, polished 30 kN 9 kN 11 kN gate opening (d) 19 mm 81 g unique production number CE 0333 EN 362 EN 12275

accessory carabiners

K5052EE00

K5182EE00

MINI PEAR
mix colour 16 g gate opening (d) 11 mm not for climbing

MINI D
mix colour 25 g gate opening (d) 14 mm not for climbing

K9000BB03

PORTER
Plastic holder for racking ice screws, pitons and industrial tools. for racking ice screws, pitons and industrial tools on the harness easy clipping and un-clipping the nose on the upper part allows to set away some staff in order to access staff on the bottom. rubber part fixes the Porter on place and prevent it from rotation WARNING: NOT FOR CLIMBING! The Porter is NOT load-bearing! It is not designed to hold humans weight. Do not use it for protection or belaying. Max. load: 5 kg Weight: 32 g

30

connectors

code Hypnos / screw Hypnos / TWL Hypnos / triple lock Extasy / bent Extasy / straight Extasy / screw D steel / screw D steel / triple lock Oval steel / screw Oval steel / triple lock D big / screw gate D bar / screw gate D Bar / TWL Ozone / screw Ozone / TWL Ozone / triple lock Largo / screw Largo / triple lock Small connector Big connector Giga connector
The gear for an arborist Photo: Luk Neklan

colour / surface titanium black titanium black titanium black yellow black titanium black titanium black zinc-plated zinc-plated zinc-plated zinc-plated silver silver silver blue black blue black blue black titanium titanium silver zinc-plated silver silver

material alloy alloy alloy alloy alloy alloy alloy alloy alloy alloy alloy alloy steel steel steel steel alloy alloy alloy alloy alloy alloy alloy alloy alloy alloy alloy alloy steel alloy alloy

EN12275 EN362 sport work

kN 22 22 22 22 22 22 25 25 25 25 25 25 50 50 30 30 30 30 30 26 26 26 26 26 26 22 22 25 25 25 25

kN 7 7 7 7 7 7 8 8 8 8 8 8 13 13 9 9 8 9 9 10 10 9 9 9 9 8 8

kN 7 7 7 7 7 7 10 10 10 10 10 10 20 20 8 8 9 11 11 7 7 7 7 7 7 8 8

gate open. weight mm g 21,5 21,5 21,5 21,5 21,5 21,5 20 20 20 20 17 17 25 25 18 18 26 19 19 21 21 21 21 21 21 30,5 30,5 21 244 60 110 71 71 75 75 75 75 47 47 47 47 52 52 255 267 176 195 88 76 81 80 80 85 85 85 85 100 104 150 244 450 965

oz 2,49 2,49 2,63 2,63 2,63 2,63 1,65 1,65 1,65 1,65 1,82 1,82 8,93 9,35 6,21 6,9 3,1 2,68 2,85 2,82 2,82 3 3 3 3 3,53 3,67 5,29 8,6 15,87 34,04

K0007EE00 K0007BB00 K0008EE00 K0008BB00 K0019EE00 k0019BB00 K0010EE00 K0010BB00 K0011EE00 K0011BB00 K0012EE00 K0012BB00 K4080ZO K4081ZO K4241ZO K4241ZO07 K5070PP K4280PP K4290PP K0016AA00 K0016BB00 K0017AA00 K0017BB00 K0018AA00 K0018BB00 K0015EE00 K4290PP K3702PP K3690ZO K3536201 K3550PP

31

helmets

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

work

helmets

W9600

KAPPA WORK
lightweight and durable working helmet with innovative design. fully adjustable, fast and secure adjustment system well ventilated with 8 air intakes, intakes are protected by an polyamid anti intrusion grille adjustable chinstrap and headband for a comfortable fit quick fastening and opening with a safety release system according to EN 397 rear size adjustment system is flexible and can be easily puted inside the helmet four head lamp holders compatible with any headlamp on the market inner padding and headband fully removable and washable. compatible with all Peltor ear defenders with P3A screw attachment. (note: Peltor ear defenders are not available at our stock) Size: UNI 53-62 cm Weight: 330 g Color: red, yellow Material: ABS injection moulded outer shell EPS energy absorption inner structure polyamid strap CE EN 397

33

sport

C0049

TERRA II
Light helmet for all climbing activities universal size fully adjustable lightweight well ventilated four head lamp holders compatible with any headlamp from the market

Weight: 270 g / 9.52 oz Size: 51 60 cm Material: shell: polycarbonate, foam: polystyrene


C0049GW00 C00490W00 C0049SW00 C0049BB00

Color options: TERRA II green TERRA II orange TERRA II grey TERRA II black matt

CE EN 12492
Lucie Hrozov, Singing Rock Climbing Team Photo: Libor Hroza

34

work

helmets

X0033

PLASMA WORK
Work helmet Helmet with an innovative design, light, compact, comfortable and well ventilated thanks to 10 air intakes that keep the head cool at all times. Provided with a fast, simple and effective size adjustment mechanism consisting of a wheel with a rubber grip on the back of the helmet. Provided with external lamp clips made of strong nylon, compatible with all helmet lamps available on the market. Soft polyethylene headband, fixed to the external shell without rivets. Inner padding consisting of two separate pieces, headband and disc, fully removable and hand or machine washable at 30C. Non-allergic, cool, moisture wicking and odour resistant fabric. Chinstrap with four fastening points at the back for a better fit. Fixed to the shell without rivets. Quick fastening and opening with a safety release system in compliance with EN 397. Provided with two soft polyethylene side retractors to regulate the length of the straps. Provided with a ring to hook the helmet onto a harness. May be fitted with the Kask visor VISIERA Plasma Work. Code: X0035 Compatible with all Peltor ear defenders with P3A screw attachment. (note: Peltor ear defenders are not available at our stock TECHNICAL DETAILS: External shell: P.P. Polypropylene Internal shell: HD Polystyrene density 50 gr/l. Headband: PE Polyethylene. Lamp holder system: External nylon 6.6. luminescent clips Size: Universal - adjustable from size 51 to 62. Weight: 380 gr. Colours available for AQ series: White, red, blue, yellow. X0033AA0 HELMET PLASMA WORK AQ blue X0033RR00 HELMET PLASMA WORK AQ red X0033WW00 HELMET PLASMA WORK AQ white X0033YY00 HELMET PLASMA WORK AQ yellow CE EN 397

35

anchor devices, slings and lanyards

Seam cover
The cover is made of high-durable transparent elastomer. It protects strength seam on the rope and allows its control and revision.

Unique production number


textile products For better traceability and inspection recording the Singing Rock slings and lanyard are marked with the unique production number.

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

anchor devices

K702X10 - 10 mm K702X12 - 12 mm

K703010

A0002SS00

HANGER PLATE
Stainless steel hanger plate for permanent anchor point loop for two carabiners stainless steel plate with 3mm thickness Weight: 45 g (1.60 oz.) Strength: 25 kN EN 959 EN 795

GLUE IN ANCHOR
Stainless steel permanent anchor point. The pointed end allows the distribution of the glue in the hole (12 mm diameter) thus guaranteeing a solid anchor point. Easy to insert. Length of shaft: 80 mm. Weight: 120 g (3.18 oz.) EN 959 EN 795

D - MOBILE
Door or window anchor point Allows to use a door or window as an anchor point. Max. spacing 1100 mm - 1 user only can be connected. Spacing to 800 mm - 2 users can be connected. Very fast and easy to set up. Weight: 10 kg CE 0123 EN 795B

K0006RP00

REDBLOCK
Anchor device, that extends lifetime of the rope when toproping ideal partner for adventure parks, rope courses and climbing gyms allows to be installed in two axises. for better traceability and inspection recording the RedBlock is marked with the unique production number.

Max. diameter of rope: 12 mm unique production number Color: red Weight: 375 g (13.23 oz) Material: stainless steel Sheave: light alloy Max. diameter of rope: 12 mm Strength: 26 kN unique production number CE 1019

K6370BB

K6371BB

K00300600

RIGGING PLATE 1/3


Helps to organize carabiners at the anchor point. Efficient force distribution at different load directions. Rounded holes (thickness 10 mm) allow to attach the ropes directly to rigging plate (at any hole). Thickness 5 mm 36 kN thickness 5 mm light alloy black matt 69 g (2.45 oz.) CE 0333

RIGGING PLATE 3/5


Helps to organize carabiners at the anchor point Efficient force distribution at different load directions. 45 kN thickness 7 mm light alloy black matt CE 0333

TWISTER
Innovated rotating anchor Placed between a load and either rope or cable, the twister avoids severe rope twisting while the load turns. Working load: 4 kN Color: anthracite/yellow Strength: 22 kN Weight: 91 g /3,25 oz. CE 0321 EN 354

37

slings and lanyards

OPEN SLING 22 kN
sewed sling, width: 20 mm

EYE SLING 30 kN
sewed sling made of two layers of strength strap wear indication width: 20 mm

SLING LANYARD 22 kN
sewed sling made of two layers of strength strap wear indication width: 20 mm [cm] W2015X060 W2015X080 W2015X120 W2015X150 60 80 120 150 [in] 24 32 47 60 kN 22 22 22 22 type

[cm] W2001Y060 W2001A080 W2001R120 W2001B150 60 80 120 150

[in] 24 32 47 60

kN 22 22 22 22

type W2000X060 W2000X080 W2000X120 W2000X150

[cm] 60 80 120 150

[in] 24 32 47 60

kN 30 30 30 30

type

CE 1019 EN 566 EN 795B EN 354

CE 1019 EN 354 EN 795B

CE 1019 EN 354 EN 795B

mobile anchoring system


(2) (1)

S = 10 m

M = 15 m

L = 20 m

38

slings and lanyards

W232OWR

LANYARD "I" 22 kN
lanyard rope diameter: 10,5 mm [cm] W2300W060 W2300W080 60 80 [in] 24 32 47 60 kN 22 22 22 22 type

LANYARD "V" 22 kN
lanyard rope diameter: 10,5 mm [cm] W2200W001 W2200W002 [in] kN type

ANCHOR LANYARD "I" 22 kN


anchor device Length: 2, 5, 10, 15, 20 m or on customers request

25/45 10/17 22 25/65 10/30 22

W2300W120 120 W2300W150 150

W2200W100 100/100 40/40 22

CE 1019 EN 354 EN 795B

CE 1019 EN 354

FINE LINE
Mobile anchoring system colour distinction of the lengths allows 2 persons movement easy to adjust and manipulate manpower sufficient for fastening when installing the system ratchet does not damage the webbing W1001WW10 W1001WW15 W1001WW20 W1002WS10 W1002WY15 W1002WO20 Fine line 10 (1) Fine line 15 (1) Fine line 20 (1) Fine line bag 10 (2) Fine line bag 15 (2) Fine line bag 20 (2)

CE 1019 EN 795 B

39

slings & lanyards

W2100X

LARA
Lanyard and anchor device for working in height made from dynamic rope LARA is tested according to EN 354 for lanyards and also according to EN 795B for the anchor devices. Both ends of the rope are terminated with stitched eyes for placing carabiners. Strength seam is protected with a plastic cover. Singing Rock recommends using carabiners with sling/rope fixation, which do not scroll in the loop and are all the time ready for use. LARA forms part of a fall arrest system and shall be used appropriately. WARNING: LARA lanyard can not be used as a fall absorber! lengths: 60, 80, 120, 150 cm W1045O

GUMMA
Lanyard available in two lengths - min. 65 (max. elongation 100), min. 90 (max. elongation 150) different types of connectors (EN 362) possible to sew in length when loaded with the weight of the user: 100 cm, 150 cm CE 1019 EN 354 Warning: Do not use as a fall absorber!

[cm] W2100X060 W2100X080 W2100X120 W2100X150 60 80 120 150

[in] 24 32 47 60

kN 22 22 22 22

type

CE 1019 EN 354 795 B W1036W130

TRACK
Adjustable anchoring strap and work positioning lanyard length adjustment from 80 to 130 cm CE 1019 EN 354 EN 358 EN 795 B

W2283X130 - length 130 cm W2283X180 - length 180 cm

STEEL LANYARD "I"


CE1019 EN354 EN795 B W0003BY09 W2284XX03 - length 300 cm W2284XX05 - length 500 cm

AXILLAR
Rescue sling to secure evacuated persons against accidental fall during the rescue action (e.g. ski lift evacuation). Weight: 355 g EN 1498 type A

STEEL ANCHOR "I"


CE1019 EN795 B

40

slings & lanyards

C2085

C2075

QUICKDRAW SLINGS 16 mm
22 kN width: 16 mm lengths: 11, 13, 16, 20 and 30 cm / 4.4, 5.2, 6.4, 8 and 12 in CE 1019 EN 566 UIAA

SLINGS 16 mm
22 kN width 16 mm A light and strong nylon slings available from 60 to 150 cm. width: 16 mm lengths: 60, 80, 120 a 150 cm / 24, 32, 48, 60 in CE 1019 EN 566 UIAA

C2000

C2001

DYNEEMA QUICKDRAW SLINGS 11 mm


22 kN width: 11 mm lengths: 11, 13, 16, 20 and 30 cm / 4.4, 5.2, 6.4, 8 and 12 in CE 1019 EN 566 UIAA

DYNEEMA SLINGS
22 kN Light, thin and still very strong. These 11 mm slings are ideal for all applications were weight and strenght come first. lengths: 60, 80, 120 a 150 cm / 24, 32, 48, 60 in CE 1019 EN 566 UIAA

C2419

SAFETY CHAIN
Innovated daisy chain: Innovated device, double loop at the end, which provides a safe, adjustable attachment of the climber to the anchor point. 16 mm webbing in the form of an adjustable lanyard which avoids DANGEROUS use of the traditional daisy chain. Safe way to shorten your adjustable lanyard to any loop without using more than one carabiner or unclip the first loop Safety Chain can be shortened to any loop safely. 11 loops safetychain 140 cm / 56 in 9 loops safetychain 120 cm / 48 in CE 1019 EN 566 UIAA

C2004

DYNEEMA SLING 8 mm
This 8 mm sling is ideal for all applications were weight and strength come first. Length: 60 cm, 120 cm / 24 in, 48 in Strength: 22 kN CE 1019 EN 566 UIAA

41

slings & lanyards

W1024BX

W1025BX

FOOTER II
ascender webbing without maillon Dimension: Min. length: 50 cm (19.7 in) Max. length: 150 cm (59 in) Weight: 145 g (5.11 oz.) Max. load: 200 kg Rock&Lock smart buckle (steel).

FOOTER II COMPLETE
ascender webbing with maillon Dimension: Min. length: 50 cm (19.7 in) Max. length: 150 cm (59 in) Weight: 180 g (6.35 oz.) Max. load: 200 kg Rock&Lock smart buckle (steel)

S1100BY

C2150BY

PULLER
Accesory webbing for chest ascender fixation fixes chest ascender in right position fixed by accessory sling or a mailon carabiner to front/back attachment point on the harness Color: black Size: UNI Width: 25 mm

JACOB
Ultra light six step ladder Steps reinforced with plastic to hold its shape even under load. Maximum load: 500 kg. Maximum load for grab loop 100 kg.

42

belay devices

K6031EE K6031BB - black matt

FIGURE 8 L
Designed for ropes of bigger diameters. 30 kN color mix light alloy 125 g 4,41 oz. for ropes of various diameters easy rappelling effective heat distribution

K6021EE K6021BB - black matt

FIGURE 8 M
Designed for ropes of smaller diameters. 25 kN color mix light alloy 104 g 3,67 oz.

K6180ZO - stainless steel K6180BB - light alloy, black matt

RESCUE FIGURE EIGHT


Special figure eight for the rescue situations and fast rappeling 40 kN material: stainless steel, light alloy weight: steel 451 g (15.9 oz), light alloy 154 g (5.43 oz)

43

belay devices

K6132EE K6132BB - black matt

K6140EE00 K6140BB00 - black matt

BUDDY
Buddy is light and compact belay tube. For all round climbers. Designed for ropes 7,8 - 11 mm mix color 54g 1,91 oz. Here s the reason that a lot of climbers aren t bealying with a figure 8. The Buddy is extremely smooth on rappel, locks off a falling climber quickly, and feed rope like dream. Great heat dissipation on rappel.

SHUTTLE
Belay and rappel device One device to do it all, the Shuttle offers maximum versatility. It has a groove, designed and shaped to provide equal friction for both thin and thick ropes. When youre belaying from above, the guide mode lets you bring up one or two seconding climbers under control. For lowering, it has a small secondary hole that you can clinch carabiner or sling to release the device.

designed for twin, half and single ropes lightweight and compact V-grooves for high friction when belaying the leader or rappeling only 65 g - one of the lightest belay devices on the market self locking function when belaying the second eye for releasing the weight possibility of simultaneous belaying two climbers rope diameter: 7.8 10.5 mm weight: 65 g / 2,29 oz. material: light alloy

self braking devices

W1010BB09

W1015B020

LOCKER
Guided type fall arrester and work positioning device. for 11 mm textile ropes (recommended Singing Rock Static 11) parking cam for blocking in required position system of releasing LOCKER when loaded unopenable version together with 11 mm sewn-in rope available as SITE - work positioning lanyard unique production number Color: black matt Weight: 188 g 6.63 oz CE 1019 EN 353-2 EN 358

LOCKER SLING
Certified sling for connection the LOCKER with your harness length: 20 cm CE 1019 EN 354

W1011WB02 - length 200 cm W1011WB04 - length 400 cm

SITE
The work positioning lanyard with great handling makes your work safe and efficient 11 mm rope sewn-in unopenable version of LOCKER - rope clamp (fall arrester) rope covered with tubular webbing parking cam for blocking in required position available with stitched-in connector in accordance with EN 362 Weight: 560 g (with connector), 410 g (without connector) CE1019 EN 358 EN 353-2

44

descenders & ascenders

K030DSD30

K6392BB

DOUBLE STOP
Descender with double locking and anti-panic system: self-breaking in case of accidental loss of descent control. Sensitive handle enables smooth descent without harmful rope twisting. Also suitable for works at a height and for emergency self evacuation. rope 11 mm for rescue situation according to EN 341 rope 10 - 12 mm for working situations according to EN 12841 Size: UNI Weight: 340 g CE 0123 EN 341 EN 12841

LIFT LEFT
rope 8 - 13 mm Hand ascender for safe and smooth ascent Size: UNI Weight: 215 g CE 0333 EN 567 K6391BB

LIFT RIGHT
rope 8 - 13 mm Hand ascender for safe and smooth ascent Size: UNI Weight: 215 g CE 0333 EN 567

K01001BB

INDY EVO
Manually operated descender device with double auto-locking system,that locks both when the lever is released or when it is pressed. INDY EVO is also a descender device (conform to EN 12841 type C) for working rope and it allows a descent at a controlled speed and stop at any time, hands free, on a static rope (EN 1891) or dynamic rope (EN 892). It allows the lowering of two people at the same time. weight: 450 g certifications: static ropes (EN 1891) 11 mm EN 341(2,A):11 EN 12841/C:06 static and dynamic ropes (EN 1891 - EN 892) 1012 mm (one person) 1112 mm (two people) NFPA-L static ropes (EN 1891) 1013 mm (one person)

K6400BB

CAM CLEAN
rope 8 - 13 mm Chest ascender for safe and smooth ascent Size: UNI Weight: 140 g CE 0333 EN 567

45

pulleys
Pulleys of various construction for rescue activities or heavy weights lifting.

K0040EE00 K0040BB00 black version

K0041EE00 K0041BB00 black version

K0042EE00 K0042BB00 black version

K6380BB

PULLEY MINI ROLL


small, lightweight and durable pulley for various uses. designed mainly for hauling systems. 22 kN max. rope: 13 mm static and dynamic ropes sheave: light-alloy, diameter 20 mm bearing: self-lubricating bushing weight: 87 g (3.07 oz) unique production number CE 1019 EN 12278

PULLEY EXTRA ROLL


durable and lightweight pulley designed and optimized for use with a Prusik friction knot attachment point accepts up to three carabiners. ball bearings and large sheave diameter for high-efficiency 32 kN max. rope: 13 mm static and dynamic ropes sheave: light-alloy, diameter 48 mm ball bearing working load: 3 kN weight: 255 g (9.00 oz) unique production number CE 1019 EN 12278

PULLEY TWIN ROLL


durable and lightweight pulley designed and optimized for use with a Prusik friction knot attachment point accepts up to three carabiners. ball bearings and large sheave diameter for high-efficiency 36 kN max. rope: 13 mm static and dynamic ropes sheave: light-alloy, diameter 48 mm ball bearing working load: 2x3 kN bottom attachment point: 12 kN weight: 424 g (14.9 oz) unique production number CE 1019 EN 12278

TANDEM PULLEY
25 kN max. rope: static and dynamic ropes 13 mm steel cable: 12 mm stainless steel ball bearing CE 0333 EN 12278

W0024XX01

K0004BB

EASY LIFT
Rescue pulley for progression and evacuation along ski lift cable. Max. diameter of steel rope 55 mm Sheave PA to be connected directly to the carrying cable of ski lift intended for evacuation of person during rescue action ATTENTION! never use pulley alone - always use together with back-up lanyard never use without braking rope For better traceability and inspection this part is marked with the unique production number. CE 1015

W0023BB00

RESCUE POLE
Retractable Pole for attaching and removing an anchor remotely Remote rescues Pole has a 2.8m reach Slim fit shoulder bag with carabiner loop which holds all components Stainless steel head which holds Big Connector Giga Carabiner holder works with Hypnos Triple lock carabiner Available with three different connectors Materials: Fiber glass pole Brass bush Stainless steel attachments W0024XX02

W0024XX03

connectors: W0024XX01 - for HYPNOS W0024XX02 - for BIG CONNECTOR W0024XX03 - for GIGA CONNECTOR

46

fall absorbers

Reactor 2 I 85

Reactor 2 Y 85

Reactor 2 Ring Y 155


type shock absorber I 85 cm code W4220WW00 W4230W085 W4231W085 W4232W086 W4233W087 W4230W155 W4231W155 W4232W155 W4233W155 W4240W085 W4241W085 W4242W085 W4243W085 W4240W155 W4241W155 W4242W155 W4253W155 W4270W155 W4271W155 W4272W155 connectors

Reactor 2 Eye Y 155


length inc. m max. 2 1,05 1,05 1,17 1,27 1,65 1,65 1,87 1,97 1,05 1,05 1,17 1,27 1,65 1,65 1,87 1,97 1,65 1,65 1,8 black version

REACTOR 2
Shock absorber parts exposed to abrasion covered with a tubular webbing shock absorber covered with a textile sheath. shock absorber can be easily taken out and dried. methodical and identification label is placed inside the textile cover light alloy ring enables to shorten a webbing in a half different webbing lengths are produced on customer's request connectors and shock absorber cannot extend 2 m possibility to stitch-in a connector (EN 362) length of completely ripped out fall absorber 140 cm CE 1019 EN 355
I 155 cm

K370 K353 K355 K370 K353 K355 K370 K353 K355 K370 K353 K355 K370 K353

Y 85 cm

Y 155 cm

Eye "Y" 155 cm Ring "Y" 155 cm

47

fall absorbers

W4000B165

OCTOPUS
Fall absorber integrated with lanyard fall absorber integrated with lanyard excellent absorbing behaviour (impact force 4,5 kN) guaranteed load before activation 2,2 kN minimum breaking strength after breaking action 15 kN each product marked with its unique production number CE 1019 EN 355

JOULE
W4100Y120 - 120 cm W4100Y160 - 160 cm The fall absorber Joule presents optimal solution for securing persons working on horizontal constructions and roofs. Joule is activated after reaching the load of 2 kN (200 kg). Minimal guaranteed strength after the breaking action is 15 kN. CE 1019 EN 355

equipment for checking of PPE


M000XSET Wire (diameter 2 mm) Monty bag Marker of textile PPE Gas Hot Knife Sliding Gauge Measuring Tape (without picture) Silicon Based Lubricant (without picture) 8 X0020XX00 Illuminated magnifier 9 X0004GB00 Thermocutter 10 L9991WB Periodic control labels + plastic films (price per package) 11 E0014XX00 File (without picture) 1 2 3 4 5 6 7 X0013XX02 X1023 X0015XX00 X0016XX00 X0017XX00 X0018XX00 X0019X400

10

48

actsafe

X002XX04

PME POWER ASCENDER


The ActSafe PME Powered Rope Ascender is a rugged tool for hard work, scorching heat or biting frost doesn't matter. This is a heavy duty tool made for professionals. It is powered by a strong and lightweight 4 stroke Honda engine and best described as personal elevator that climbs a standard rope. It allows you to work faster and more ergonomically at height. It is a lightweight alternative to other lifting equipment. An already high lifting capacity that can be further extended by a pulley system makes it ideal for lifting/dragging material and equipment. Ropes: Static / semi static rope 10-13 mm EN1891 (11 mm preferred) Safe Working Load: 200 kg Max Working Load (rescue only): 250 kg Ascent Speed: 0-17 meter per minute with a load of 120 kg. Descent Speed: Not applicable. The PME Power Ascender goes only in one direction - up. A setup including a descending device is required in order to work in two directions Working temperatures: -20 to +40 degrees Range: On a full tank of fuel the range with 120 kg load is 700 meters. Weight: 10.4 kg Dimensions: 47 x 25 x 28 cm Engine: Honda GX35 4 stroke Recommended Fuel >95 octane unleaded gasoline.

X0100XX

ACC POWER ASCENDER II


Advantages with the ActSafe ACC power Ascender system The short set-up time involves that the work can be done in a manner that is quick, safe and less expensive than if performed with for example a sky lift. Clean and silent operation, ActSafe ACC is ideal for work and rescue indoors and in confined spaces. It is a light weight alternative to wire winches. The combination of the high lifting capacity and the sophisticated up/down control makes it perfect for lifting or dragging material and equipment. It is a versatile tool that can be used in places where it is impossible to use a sky lift or a powered platform. Technical Data Ropes: The standard rope grab system allows static / semistatic rope 10-13 mm EN1891. The tactical rope grab system allows ropes from 7 to 9 mm. Max Working Load: The Safe Working Load (SWL) is 200kg. When used in a rescue situation with properly trained personnel the total load must not exceed 250 kg. However, if the load superseeds 265 kg, the overload is monitored electronically and the power is automatically switched off. Ascent and Descent Speed: The speed of ascent and descent can be continuously adjusted from 0 to 22 meters per minute. Speed and direction is controlled with one hand, you have always one hand free. If the battery runs out of power during ascent or descent the emergency descender can be used in order to get down. The descent speed is approximately 0,5 m/s Battery Life Time: The normal life time of the battery is 800 to 1000 charging cycles. Temperature Range: -10 C to + 40C Weight: 18 kg including the internal battery. Dimensions: 40 x 30 x 25 [cm]

49

special devices Tractel

A0057AP00

EVAK 500
Rescue device The EVAK 500 is a winch-hoist with unlimited length of textile rope and a lifting or pulling capacity of 500 daN. It has been specifically designed for use by the professionals of the emergency rescue services. It is a machine for lifting or pulling a person or materials by the to-and-fro movement of a lever linked to two self-gripping sliding jaw blocks. A0058XX00

A0001SS38 A0001SS64

A0045XX00

I - MOBILE
mobile anchor point I - mobile follows user around the framework with a minimum of his intervention. Can be installed on the upper or lower soleplate and 1 user only can be connected. Two models: 1. 120 - 380 mm [A0001SS38] - weight 1500 g 2. 120 - 640 mm [A0001SS64] - weight 2000 g Adjustable from 120 mm to 640 mm. CE 0123 EN 795B

POLE PERCHE 6 m
6 m long pole. Enables the settings up of a lifeline from the ground or from safe place. Standard: CE, EN 795 class B Fibreglass pole With adapter for carabiner AM53 (A0046XX00) Rod: weight: 2,4 kg, dimensions: 2,40 m folded, 6,20 m unfolded Connector: weight 0,55 kg, gate opening (d) 53 mm

SPARE PART
Safety pin 500

A0128

A0032WA20

A0034AA00

DEROPE UP A
Rescue device Thanks to their manoevering steering wheel, the derope UP recovery descent devices enable the upward removal of a person that has fallen into a structure. They are equipped with a recall mechanism and rope clam cleat. Usage and descent speed are identical on descent devices only. Complies with the EN 341 and EN 1496 Standards. One person descent max. height 400 m - max. load 150 kg Two person descent max. height 125 m - max. load 225 kg

DEROPE STD
Rescue device The Derope KT is designed for evacuating people from a height limited to 40 m. Attaching more than one person on the descending end is prohibited. Self-trigger device.

TRIPOD
Adjustable telescopic feet with pivoting sole plate. Height: min. 1.74 m, max. 2.48 m Width: min. 1.10 m, max. 1.63 m Weight: 17 kg EN 795-B, EN 1496 Accessories: A0040AA02 - BLOCFOR 20 R With securing system. Cable length: 20 m. A0040AA03 - BLOCFOR 30 R With securing system. Cable length: 30 m. A0037BA02 (M20), A0037BA03 (M30) CAROL + CONSOLE Winch 250 kg 250 kg capacity. Available cable lengths of 20 and 30 m.

50

retractable fall arresters Tractel

A0003AA

A0004AA

A0005AA

BLOCFOR 2W
polyester webbing width 45 mm lenght: 2 m CE 0320 EN 360

BLOCFOR 5S
polyester webbing width 20 mm + 2 carabiners lenght: 5 m aluminium casing CE 0320 EN 360

BLOCFOR 6S
polyester webbing width 15 mm + 2 carabiners lenght: 6 m CE 0320 EN 360

BLOCFOR 10, 20, 30


Retractable fall arrest system with 10-20-30 m deal of freedom of movement. CE 0082 EN 360

BLOCFOR 10 cable galvanized steel cable stainless steel cable aramid cord M46* A0010AA01 A0011AA01 A0012AA01 M47** A0020AA01 A0021AA01 A0022AA01

BLOCFOR 20 M46* A0010AA02 A0011AA02 A0012AA02 M47** A0020AA02 A0021AA02 A0022AA02

BLOCFOR 30 M46* A0010AA03 A0011AA03 A0012AA03 M47** A0020AA03 A0021AA03 A0022AA03

* M46: automatic carabiner with fall indicator * M47: automatic carabiner without fall indicator SINGING ROCK offers all technical servis for Blocfor products and the other Tractel devices which we sell. For any other model or connector, please ask our sales department.

www.singingrock.com
51

accessories & promotional

4
harnesses

18
ropes

26
connectors

32
helmets

36
anchor devices slings lanyards

52
accessories & promotional

62
working activities

52

accessories & promotional

GEAR BAG
Waterproof, durable and washable Very convenient to carry your gear. Takes up little space and stays dry. Transparent pocket (A4) on the top flap for your documents. intended for speleology and working at heights washable minimum amount of seams main seams feature HF welding durable material colors: yellow and black S9000BB35 - GEAR BAG 35 l black S9000YY35 - GEAR BAG 35 l yellow S9000BB50 - GEAR BAG 50 l black S9000YY50 - GEAR BAG 50 l yellow

C0046BB

W0008BS

EXPEDITION BAG
TARP DUFFLE 70, 90 Its not your average duffel bag Made from a durable laminate material, the TARP DUFFEL is an almost indestructable bag. Resilient enough to be roughed up in-flight, or to be transported up a mountain via a yak or off-road vehicle, this is one burly duffel bag. For longer trips, grab the 90 liter size so you have enough room for all your gear Alpine-cut shoulder straps Dual daisy chains Twin haul handles on ends Rugged construction with extra bartacks and double stitching Four compression straps Internal mesh pockets Pocket on top Capacity: 70, 90 Color: black Weight: 1820 g (70 l), 2270 g (90 l) (15g) Material: PVC C0046BB70 - 70 litres, black C0046BB90 - 90 litres, black

TOOL BAG
Hardware carrier and organizer made of high resistant and durable fabric POLYMAR inside and outside pockets for hardware intended to be atached directly to the harness via carabiner or using additional waist belt well arranged easy to maintain maximum load -10 kg dimension - 23 x 23 x 9 cm carabiner is not included

W0052B010

WORKING BAG
Transport bag for working harnesses - also suitable as a gear bag for tools made from high abrasion resistant material PES 600 g/m2 simple closing system with a plastic buckle net on the bottom for better airflow (the bag is not waterproof) transparent pocket for the name tag or instruction of use wide opening for easier putting in the harness or gear inside stichting covered by lace webbing Color: black Weight: 125 g ( 15 g) 4.4 oz ( 0.5 oz) Material: PES Capacity: 10 litres

W1023

MONTY BAG
Bag for your gear and documents adjustable shoulder strap made of high resistant and durable fabric POLYMAR washable durable material colors: grey, yellow, orange, red

53

accessories & promotional

A0031BS

WORK KNIFE
Pocket knife with first class stainless steel blade Blade length 80 mm, one hand operation and safety lock of opened knife. Blade - stainless steel, plastic handle, stainless steel flexy clip. Weight: 61 g

A00510S

W9700BY

W9800BB

DANTE
Pocket knife with first class toothed stainless steel blade Blade length 80 mm, one hand operation and safety lock of opened knife. Blade - stainless steel, orange plastic handle, stainless steel flexy clip. Weight: 83 g

OVERALL
Working overall combining durability, working comfort and maximum freedom of the movement. Specially intended for working at heights, easy and quick to take off even without taking the shoes off. 60% Polyester/40% Cotton 250 g/m2, 500D Cordura compliant with EN 340 bright colors and reflective strips increase the workers visibility high durability even when its washed at high temperatures (90 C) full-length overall with two zippers to guarantee high comfort, practicality and a high speed when putting-on adjustable waist for optimum working comfort elastic fabric in the armpits and crotch two large breast pockets on the left sleeve pocket with compartments for mobile phone, pens, small items on the left leg extremely large pocket for plans, gloves, etc. on the right leg pocket for rescue knife supplemented by two rings of rubber for protection against falling on the back zipper pocket for small items all pockets marked with bright color for greater comfort pants, collar and sleeves ending with adjustable Velcro against heat loss, the penetration of dirt, snow, etc. pants tested in the fields of work at height, rescue, arboriculture Size: M, L, XL

WORKING PANTS
Lightweight working pants with high flexibility. Combining durability, working comfort and maximum freedom of the movement. Specially intended for working at heights. 98% Cotton, 2% Elastane, 250 g/m2, 500D Cordura compliant with EN 340 bright colors and reflective strips increase the workers visibility material ELASTAN guarantees a very high comfort during movement and thus the resistance jeans low cut for comfortable fit higher back for comfortable fit with a working harness large two loops for braces two deep pockets large zippered pocket for mobile phone or small items, including loops to ensure against the fall pocket for rescue knife supplemented by two rings of rubber for protection against a fall in the narrow side seam pocket for a pencil on the back zipper pocket for small items all pockets marked with bright color for greater comfort front part reinforced with Cordura pants ending with adjustable Velcro against heat loss, the penetration of dirt, snow, etc. pants tested in the fields of work at height, rescue, arboriculture... Size: S, M, L, XL

A003OY

RESCUE KNIFE
Special knife with first class stainless steel ejection blade Blade length 80 mm and safety lock of opened knife. Special shape of the blade with the hook at the end for cutting of ropes or webbing. Other features: glass cutter, hammer for glass window breaking, opener of electrical cases - wrench. Blade - stainless steel. Stainless steel flexy clip Weight: 196 g

54

accessories & promotional

C0007BB

C0011BB

C0008BB

VERVE
Made out of quality goatskin. Reinforced palm area - 50 % Kevlar and 50% Nomex material. This interlayer is barrier for heat. Backhand is lined by absorbing layer. Closed ends of gloves do not restrict to your fingers sensibility and fine manipulation with your gear. Size: 8, 9, 10, 11

VERVE SHORT
three fingers cutted Size: 8, 9, 10, 11

VERVE 3/4
gloves var. 3/4 fingers Size: 8, 9, 10, 11

C0006BH

C0006HH

GRIPPY
Made out of quality leather. Reinforced palm area. Closed fingers. Abbrasion resistant. Gloves are easy to put on thanks to special pull-on loop. Kevlar thread. Size: 8, 9, 10, 11

GRIPPY 3/4
Made out of quality leather. Reinforced palm area and lower part of finger area. Exposed fingertips allow you to keep your sense of touch and manipulate your gear. Gloves are easy to put on thanks to a special pullon loop. Kevlar thread. Size: 8, 9, 10, 11

W9001B

W9000A

TUNDER NOMEX
Tactical gloves Its a five fingers glove made from black Nomex textile and leather. Palm of the glove is made from goat skin with hydrophobic treatment. The palm is equipped with sophisticated reinforcement underlaid with Kevlar-Nomex felt. The glove finishes in knitwear of the same constriction as a dorsum of the glove. Size assortment: 7, 8, 9, 10, 11, 12

TACTICAL GLOVES
Tactical gloves Its a five fingers glove made from dark blue Kevlar textile and leather. Palm of the glove is made from goat skin with hydrophobic treatment. The palm is equipped with sophisticated reinforcement underlaid with Kevlar-Nomex felt. The glove finishes in knitwear of the same constriction as a dorsum of the glove. Size assortment: 7, 8, 9, 10, 11, 12

55

accessories & promotional wear

C1013BB - man C1014BB - woman

T-SHIRTS BACKBONE
T-shirts made of 100 % cotton, short sleeves classic round collar men/women

The T-shirts SINGING ROCK are very comfortable to wear. size: S - XL weight: 185 g

C1013YB - man C1014YB - woman

T-SHIRTS BACKBONE / YELLOW

T-shirts made of 100 % cotton, short sleeves, clasic round collar Size: S - XL

C1016SS - man C1017YY - woman

T-SHIRTS ORGANIC
Made from 100% organic cotton and dyed with 100% clay, double-stich on sleeve, bottom hems and shoulder to shoulder tape will make this T-shirt last for many years to come. Tagless label, relaxed fit. Ladies version with longer and better fit. Fabric: 100% organic cotton. Man: Size: S, M, L, XL Color: grey, brown Designs: Grand Capucin, Mountains Woman: Size: S, M, L Color: pink Designs: Eights Organic cotton

56

accessories & promotional

C1018BX

HOODY SWEATSHIRT
Made from 100 % cotton warm, cozy and comfortable hoody with a kangaroo pocket and a big hood style: UNIsex size: S, M, L, XL colour: black

C1019BX - man C1020BX - woman

SWEATSHIRT ZIPPERED
warm, cozy and comfortable hoody two pockets, hood and full zipper style: Men, Women size: S, M, L, XL, XXL (XXL- only man) colour: black material: 80 % cotton, 20 % soft polyester

57

accessories & promotional hats


Wool/acrylic mix hat with a fleece headband lining innovated desing, perfect hat for cold working days, fits under the helmet

C9000BB

C0057

C0057

C0055

SKIP HAT

BEEHIVE
orange

BEEHIVE
grey

LETS ROCK
black

C0056

C0056

C0056

LETS ROCK
red

LETS ROCK
orange

LETS ROCK
green

C0051BH black C0051HH brown

BASEBALL HAT
Square-shaped visor. Logo on front. Website singingrock.com on back.

SCARF
Multifunctional scarf 8 in 1 with a wide variety of uses for your protection against wind and cold. can be used as a balaclava, cap, masc, scarf, beanie, shawl, ear warmer, etc. 5 different designs to fit all users styles made from elastic high-tech 100% polyester microfibre fabric that keeps its shape well, as well as being breathable, warm, soft, lightweight, of a very high quality and antibacterial. machine washable at 30 C, cannot be tumble dried, air dry very quickly Size: UNI (approx. 25 cm wide x 46 cm long) Weight: 35 g (1,24 oz) SCARF ARROWS SCARF RETRO SCARF WORK SCARF SIGR SCARF FAXCE C0062AR00 C0059RE00 C0063WO00 C0060SI00 C0061FA00 C9091XX

BELT FOR THROUSERS


with Rock&Lock smart buckle This buckle is used on almost every harness from SINGING ROCK production Size: M/L, XL

58

accessories & promotional

P0014BB00

MUG MAX
Thermo cup with plastic handle keeps your coffee or tea hot. Ideal for your drinks holder in your car. Capacity: 520 ml (18 fl. oz.) Weight: 300 g (10.5 oz.)

P0012BB00

MUG
Thermo cup with a sturdy handle keeps your coffee or tea hot. Capacity: 350 ml (15,256 cu in) Weight: 250 g (8,82 oz.)

C0053RW

FIRST AID BAG


(without contents) Compact and light first aid bag for minimalists. ideal for all of those who wish to choose their own contents. all-round zip fastener with reflective component guarantees a good overview and easy access. two attachment loops; insert compartment in different sizes; zipped mesh pocket velcro attachment loop on the harness or a hip strap of backpack easily removable from the harness by one hand emergency whistle included measurements: 13 x 10 x 5 cm material: polyamid, polyester

P0010X050 0.5 l P0010X030 0.3 l

PITCHER
Classical beer pitcher 0.5 l or 0.3 l for all who likes climbing and all activities on our vertical playground.

SINGING ROCK STICKERS


C0058RR00

FIRST AID BAG - LARGE


(without the content) ideal for all of those who wish to choose-their own content bright colour increases the visibility in a bad weather or inside the backpack big attachment loop insert compartments in different sizes zipped big mesh pocket inside buckle with the emergency whistle high-durable material for the use in demanding conditions. measurements: 22 x 18 x 5 cm material: polyamid, polyester weight: 189 g

Stickers with back side adhesive.

Stickers with front side adhesive.

59

permanent fastening systems

checks and service. THE RANGE OF USE PFS are designed for: high and administrative buildings, schools, depots, docks, mining machines, hangars, silos, storage and factory buildings, fair palaces, shopping and sport centres, trafc terminals and many other buildings and facilities whose serviced is performed by human labour force.
Permanent Fastening System installation, Brno, Czech Republic Photo: Petr Pavlek

ADVANTAGES PFS are light systems which do not overload carrying elements of buildings and structures. PFS are appropriate anywhere where the workers need to be fastened and where mobile footbridges, cranes or other handling and lifting devices would be expensive (concerning their operation as well as expenses), too heavy, and where their appearance would disturb the appearance of the building. Durability of the PFS can be determined according to the durability of the building or structure on which they are placed. Handling the PFS is intuitive and easy. Every trained user is able to handle it routinely. All parts of the PFS can be replaced.

INTRODUCTION OF THE SYSTEM Permanent fastening systems (PFS) function, above all, as the systems of preventive and active protection to the users who are in danger of caving in, sliding or falling to depth. PFS is preventive as well as active protection against falling for its users. It makes it possible for its users to move safely, adjust its position, ascend or descend, hang and do any other activities associated with their work. PFS is designed and constructed to catch a potentially falling user, which is done safely and in accordance with valid safety regulations of Czech Republic and European Union.

PFS can differ from each other depending on their type (vertical, horizontal etc.), design (cable, rail), utilization (adjusting position, hanging etc.), estimated number of users (at least 2 persons, maximum according to the investors demand or according to the capacity of the carrying structure, wall, attic etc.). It is therefore absolutely necessary to train the users before rst using the system and also to make them familiar with the plan of operation and plan of evacuation. All the system components are made from stainless steel, steel with surface treatment or aluminium, which assures high endurance of the system against the atmospheric inuence. Durability of the system is limited by durability of the building, regularity of

irata

SINGING ROCK is associate member of IRATA under number 101 since October 2009. IRATA, the Industrial Rope Access Trade Association, was formed as a result of an initiative by a number of leading companies involved in industrial rope access techniques. The associations main aim is to promote the development of rope access techniques and to ensure that its members work in a safe and effective manner. Full members of the association are subject to stringent entrance qualications and audit to ensure that they meet IRATAs requirements for quality assurance, safety, training and working practices. The benets of these procedures and requirements are reected in the very low level of accidents reported

by IRATA members. By the end of 1997, members had recorded nearly four million man-hours of work on ropes with an incident rate of less than three per 100,000 hours. Virtually all these accidents or incidents were so minor that they were not reportable under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR). Safety is paramount in our industry. Since its formation IRATA, and its member companies, have worked assiduously to: improve safety in the industry. produce an industry standard set of guidelines and training requirements. provide a comprehensive assessment and registration process for operatives.

60

training centre

POLYGON KLADNO is in previous industrial zone and provides an excellent posibilites for all kind of working situations for workers at heights. SINGING ROCK, as the first one in Czech Republic, has decided to establish multifuncion POLYGON with multimedia classroom in order to improve the level of the rope access work training. After gathering some information and experience from other countries in which such training centres are commonly used, the working team was set up to ensure the preparation and implementation of this facility. The training centre POLYGON involves wide range of simulated situations such as: move on the roof with a variable declension, tree climbing, antenna masts, silo, scaffolding, high voltage masts and other construction suitable for practicing of working at a height. As the service of the trainings in POLYGON has grown, SINGING ROCK has decided to open another POLYGON training centre in KLADNO, Czech Republic. First training in our new training centre was done in summer 2011 and after the whole reconstruction of the building it will be second POLYGON specialized for the rope access work training in Czech Republic. Nowadays SINGING ROCK offers the training for workers at a height in our two training centres POLYGON PONIKL and POLYGON KLADNO: Technical description POLYGON PONIKL: capacity of internal room for training (incl. classroom) 1512 m3 tract of internal room for training (incl. classroom) 240 m2 max. height: 9.4 m internal room max. height: 13.5 m external room List of activities (internal) inclinable roof (inclined plane) stage construction garner / confined spaces elevated platforms steel cross-beams tree scaffolding telecommunication antenna

List of activities (external) lattice-work mast transformer (8.5 m) lattice-work mast high voltage (14.4 m) chair lift (opening fall 2012) trees for an arborist training
Polygon Ponikl Training centre Photo: SINGING ROCK archive

www.singingrock.cz/polygon

Technical description POLYGON KLADNO: tract of internal room for training ground floor 330 m2 tract of internal room for training 1st floor (incl. classroom) 500 m2 max. height: 16.3 m internal room
Polygon training centre, Kladno, Czech Republic Photo: Luk Neklan

List of activities (internal) roof (inclined plane) stage construction garner / confined spaces elevated platforms steel cross-beams tree scaffolding telecommunication antenna rope park platform

61

Polygon training centre, Ponikla, Czech Republic Photo: SINGING ROCK archive

work restraint

Reconstruction of the bridge in Koln, Czech Republic Photo: SINGING ROCK archive

The equipment is used on the roofs or other flat surfaces where the user can stand comfortably. Fineline is attached to a secure points and the worker is fixed to this line with e.g. LOCKER SLING and LOCKER. Fullbody harness or sit harness may be used for restraint. If working place is too close to the corner of a roof, two systems may be needed to provide adequate safety to prevent a fall from the side of the roof and prevent a fall over the edge.
W9600

W1021WW20

FINE LINE
fine line 20
page 38

C0006BH

KAPPA WORK
work helmet
page 33

GLOVES GRIPPY 3/4


C0006HH

GLOVES GRIPPY
page 55

W0320SY

BODY
fully adjustable fall-arrest harness
page 11

K4241Z005

OVAL STEEL CONNECTOR


S9000BB50

GEAR BAG
50 l black
page 52

with screw gate, key lock


page 27

W2000X120

EYE SLING 30 KN
sewed sling with eye, made of two layers of strength strap with wear indication
page 38

W1012WB04

W4100Y120

SITE 400 CM + K370


length 400 cm
page 9

JOULE 120
fall absorber 120 cm
page 48

62

towers and rigging

SINGING ROCK Polygon training centre, Czech Republic Photo: SINGING ROCK archive

W0048BR

EX-TEN
W0008BS

TOOL BAG
hardware carrier and organizer
page 52

support of waist belt to increase comfort


page 15

C0006BH

GRIPPY
page 55

S9000BB50

K4241Z005

GEAR BAG
50 l black
page 52

OVAL STEEL CONNECTOR


with screw gate, key lock
page 27

Working on tall structures may involve fall arrest, work positioning, rope access and possibly evacuation. If no stable safety system is present and the structure needs to be climbed repeatedly a flexible fall arrest line may be required For climbing on the frame construction of metal towers fall absorber may be essential. Construction demands a full range of fall protection solutions to meet the needs of a dynamic workplace. Thats why workers turn to SINGING ROCK for expertise, superior quality products and continual systems innovation.

W0042BR

PROFI WORKER SPEED


speed buckles
page 7

W9600

KAPPA WORK
work helmet
page 33

A0031BS

WORK KNIFE
page 54

W1010BB09

LOCKER
guided type fall arrester and work positioning device.

L026

page 45

CONTRA 10,5
static rope
page 19

W1015B020

LOCKER SLING
connecting sling for connection of your harness and LOCKER (fall arrester).
page 45

W1012WB02

W4270W155

SITE 200 CM
+ K370
page 9

REACTOR 2
fall absorber integrated with lanyards
page 47

63

rope access

Wind turbine service, Germany Photo: SINGING ROCK archive

Rope access is called royal discipline in working at height activities. This working method is fast, effective, has little effect on the workplace and it is very quick to install nad dismantle. It is used for a wide variety of work: cleaning, painting, inspection and other working situations. Where is rope access used? There are five main areas in which rope access companies operate (and examples of the range of work carried out): Inspection and Testing Safety surveys Maintenance and Repair Sealant installation and reinstatement Cleaning and Painting Jet spray, grit blast and three-tool method Geotechnical (Civil Engineering) Permanent rock anchorage Construction Cladding

C0046BB C0007BB

EXPEDITION BAG
tarp duffle 90 litres
page 52

VERVE
kevlar and nomex
page 55

L0230

STATIC 10,5
page 19

K4241ZO07

W9600

KAPPA WORK
work helmet
page 33

STEEL OVAL CONNECTOR TRIPLELOCK


page 27

W0045BR

EXPERT II SPEED
full body harness
page 6

K0008EE00

HYPNOS / TWL
W0010BB key lock
page 29

FRANKLIN
page 15

W1027B

W1010BB09

DEFENDER
protects rope sheath against abrasion on roughsurfaces and edges
page 24

LOCKER
guided type fall arrester and work positioning device
page 45

C2150BY

JACOB
six staves aider
page 42

K6391BB

LIFT RIGHT
page 45

K6400BB

CAM CLEAN
hand and chest ascenders for safe and smooth ascent
page 45

K030DSD30

A003OY

DOUBLE STOP
descender with double locking and anti-panic system
page 45

RESCUE KNIFE
with first class stainless steel ejection blade
page 54

64

fall arrest

Chair lift assembling, Paseky nad Jizerou, Czech Republic Photo: Borek Nechanick

C0006HH S9000BB35

GLOVES GRIPPY 3/4


page 55

GEAR BAG
35 l black
page 52

K4241ZO05

Systems for belaying persons at an anchorage point in order to avoid a fall or to arrest the fall safely. The falling distance is limited and the impact forces on the body are reduced to a tolerable degree. When the harness is used properly, it arrests the persons fall, transmits the impact forces to more resistant body parts and keeps the body in an upright position.

OVAL STEEL CONNECTOR


with screw gate, key lock
page 27

W9600

KAPPA WORK
work helmet
page 33

W0063BB

TECHNIC
page 9

K4081ZO

D STEEL CONNECTOR TRIPLE LOCK


with triple lock gate, key lock, zinc plated
page 27

W4270W155

REACTOR 2
shock absorber with "eye" lanyards
page 47

W1010BB09

LOCKER
guided type fall arrester and work positioning device
page 45

W2001B120

OPEN SLING 22 KN
sewed sling 20 mm
page 38

W1015B020

LOCKER SLING
W4100Y120

JOULE 120
fall absorber 120 cm
page 48

connecting sling for connection of your harness and LOCKER (fall arrester)
page 45

W2320WR

ANCHOR LANYARD "I" 22 kN


anchor device lenghts on customer's request
page 39

65

tree care

Danger tree cutting, castle Konopit, Czech republic Photo Luk Neklan

An arborist, arboriculturalist or tree surgeon is a professional in the practice of arboriculture, which is the management and maintenance of the trees. To move around freely and efficiently, arborists fasten a rope from the ground and then install a device for ascending the rope. Once the arborist is in position, he needs to remain balanced and feels comfortable for pruning, removal of dead branches, shaping of tree for structural, health and aesthetic purposes.

C0006BH

K0015EE00 L0450

GLOVES GRIPPY 3/4


C0006HH

LARGO / TRIPLE LOCK


large gate opening
page 28

STATIC R44 11
page 19

GLOVES GRIPPY
page 55

W9600

KAPPA WORK
work helmet
page 33

K0018AA00 W0061BR

OZONE / TRIPLE LOCK


page 28

TIMBER II
work positioning harness presenting a perfect choice for arborists
page 14

W9500Y

W1015B020

TREEMOUSE
Arboristic throwing bag for tree climbing
page 14

LOCKER SLING
page 45

W1011WB

W2608 W2610

SITE
work positioning lanyard
page 9

TIMBER ACCESSORY CORD


with sewn eyes

K0040EE00

page 23

PULLEY MINI ROLL


page 46

W1041R

K9000BB03

JINGLE
page 16

PORTER
accessory plastic carabiner
page 30

66

military and special forces

Commando training, Germany Photo: SINGING ROCK archive

C0007BB

W9001B

VERVE
kevlar and nomex
page 55

TACTICAL GLOVES
TUNDER NOMEX
page 55

Complete range of black textile and metal (matt) products, including ropes and lanyards. Special ropes with unique features. Easy use of equipment in the cruelest conditions you can image. Handling in gloves, manipulation in a dark and quick releasing are obvious.
L0230

STATIC 10,5
static rope
page 22

C0049BB00

HELMET TERRA II
- black
page 34

W0021BB

STRIKE
Tactic harness
page 13

W1001BB

URNA
rope bag to be fastened on the user's leg K6180BB
page 24

BIG FIGURE EIGHT


special figure eight
page 43

S9000BB50 K6132BB

GEAR BAG 50 L
page 52

BUDDY
buddy is light and compact belay tube
page 44

W1010BB09

LOCKER
guided type fall arrester and work positioning device
page 45

W0005BBO9

LAIKA - BLACK
dog harness
page 15

67

rope courses and adventure parks

Rope course Harrachov, Singing Rock staff training Photo: Jan Zmenk

Complete range of the equipment intended for the rope courses and adventure parks. The safety equipment for each participant basically consists of a harness, a lanyard and a belay system. Sometimes helmets are also used.
K0006RP00

REDBLOCK
page 37

K6380BB

TANDEM PULLEY
25 kN
page 46

W9600

KAPPA WORK
work helmet
page 33

W0050BR

TARZAN
page 10

K0017AA00

OZONE TWL
page 28

C0006HH

GLOVES GRIPPY 3/4


page 55

K0018AA00

OZONE TRIPLE LOCK


page 28

W2100X

K4241ZO07

LARA
page 40

STEEL OVAL CONNECTOR / TRIPLELOCK


page 27

68

ski lift evacuation

Ski lift evacuation, Krkonoe, Czech Republic Photo: Borek Nechanick

L0450

K3550PP

STATIC R44 11
page 19

GIGA CONNECTOR
page 30

W9600

KAPPA WORK
work helmet
page 33

K0007EE00

HYPNOS SCREW
key lock
page 29

W0045BR

EXPERT II SPEED
W821OBY full body harness
page 6

Ski lift or gondola evacuations utilize specialized rescue techniques and gear that must perform regardless of weather conditions. The success of evacuation operations begins with having the proper ski lift or gondola evacuation gear then hinges upon the instruction, training and practice of the operating personnel. If the ski lift equipment fails, the person in charge must evacuate passengers according to the evacuation plan. Evacuation of a ski lift requires specific techniques for movement along a cable. For maximum efficiency, these operations are led simultaneously by several independent teams. Evacuation is a team effort and requires perfect coordination by everyone involved. SINGING ROCK team cooperates with ski resorts all over Czech Republic to improve rescue methods and develop a new gear.

EVACUATION TRIANGEL COMBI


with shoulder straps
page 15

K4241Z005

OVAL STEEL CONNECTOR / SCREW


key lock
page 27

W0003BY09

K6180ZO

AXILLAR
rescue sling to secure evacuated persons against accidental fall during rescue action (e.g. ski lift evacuation)
page 40

BIG FIGURE EIGHT


page 43

K0004BB

EASY LIFT
W4270W155

REACTOR 2
fall absorber integrated with lanyards
page 47

Rescue pulley for progression and evacuation along ski lift cable.
page 46

CD SKI LIFT EVACUATION


page 43

69

industrial rescue

Integrated Rescue Service training, Czech Republic Photo: Borek Nechanick

The hierarchy of fall protection rescue is simple: self-rescue by the worker who has fallen, assisted rescue by co-workers, and, if everything fails, calling the professional rescuers. A couple of notes: A facility should call for the professionals as soon as a worker takes a fall. Remember that the pros can always be turned around if our fallen worker is otherwise rescued. And assisted rescue by co-workers could consist of any of many means of assistance, from leaning out to hand a fallen worker a piece of rescue equipment or cranking the worker up or down to safety, even to using an on-site rescue squad utilizing professional rope rescue techniques. The rescue hierarchy: Evacuation and rescue systems can be categorize in following points: self rescue (evacuation) by descent rescue by lowering rescue by hauling rescue by descent - Evacuation by Tyrolean traverse... All methods require specific techniques and sort of equipment. Downward evacuation Easier to install, this is the preferred type of evacuation, when possible. Downward evacuation takes place using gravity, applying different techniques determined for specific types of field. Upward evacuation Upward evacuation requires techniques which are sometimes particularly complex (hauling with a mechanical winch, creating a hauling system built from lightweight pulleys, using counterweight techniques, etc.)

L0430 C0007BB

STATIC R44 10,5


static rope
page 19

K0008EE00

HYPNOS / TWL
key lock
page 29

VERVE
kevlar and nomex

K4080ZO

W9600

page 55

KAPPA WORK
work helmet
page 33

D STEEL CONNECTOR SCREW


with screw gate, key lock, zinc plated
page 27

K0041EE00

PULLEY
W0042BR

PROFI WORKER SPEED


A003OY

extra roll 32 kN
page 46

RESCUE KNIFE
with first class stainless steel ejection blade
page 53

full body harness SPEED buckles


page 7

K0042EE00

PULLEY
twin roll 50 kN
page 46

W2283X180

STEEL LANYARD "I"


180 cm
page 40

K6371BB

RIGGING PLATE 3/5


page 37

W1010BB09

LOCKER
guided type fall arrester and work positioning device
page 45

K6391BB

LIFT RIGHT
page 45

K030DSD30

DOUBLE STOP
descender with double locking and anti-panic system
page 45

W1015B020

LOCKER SLING
W4270W155

REACTOR 2
shock absorber with "eye" lanyard
page 47

connecting sling for connection of your harness and LOCKER (fall arrester)
page 45

70

The list of the European Norms for Personal Protective Equipment (PPE) against falls from a height
Kilice church, Krkonoe, Czech Republic Photo: Borek Nechanick

EN 341 PPE against falls from a height. Descender devices. EN 341 change A1 descender device change EN 353 1, 2 PPE against falls from a height. Guided type fall arresters.

EN 354 PPE against falls from a height. Connecting equipment max. length 2 m (incl. connectors). EN 355 PPE against falls from a height. Energy absorbers.

EN 360 PPE against falls from a height. Retractable type fall arresters.

EN 361 PPE against falls from a height. Full body harnesses.

EN 362 PPE against falls from a height. Connectors.

EN 813 PPE against falls from a height. Sit harnesses.

EN 397 PPE against falls from a height. Industrial safety helmets

EN 358 PPE for work positoning and prevention of falls from a height. Work positioning systems. EN 795, EN 795/A1 Protection against falls from a height. Anchor devices.

EN 1496 Rescue equipment Rescue lifting devices.

EN 1497 Rescue equipment Rescue harnesses.

EN 1891 PPE against falls from a height. Low stretch kernmantel ropes.

EN 892 PPE against falls from a height. Dynamic (strech) ropes.

Light Tower, Prague, Czech Republic Photo: Guilherme TOTO Settanni

Catalogue SINGING ROCK 2013/14 working equipment SINGING ROCK All rights reserved. Technical specifications may change without notice. Printed in Czech Republic.

Singing Rock Ponikl 317 CZ-512 42 Ponikl e-mail: info@singingrock.com tel.: +420 481 585 007 fax: +420 481 540 040

www.singingrock.com

Warning: Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death. Thus the following is essential before use: careful reading and understanding of the instructions for use acquaintance with the possibilities and limitations of the product adequate apprenticeship in appropriate techniques and methods of use understanding and acceptance of the risk involved. In case of doubt or problem of understanding, contact SINGING ROCK.

Você também pode gostar