Escolar Documentos
Profissional Documentos
Cultura Documentos
Contents
Nokia Mobile VPN client setup
Prerequisites for installing Nokia mobile VPN client
3
3
Install and configure Nokia Mobile VPN client Advanced instructions Nokia Mobile VPN Client for Symbian Belle
VPN connection using VPN toggle
4 6 7
8
2
2012 Nokia. All rights reserved.
Alternatively, you can select Send button to send the policy directly to device that is connected to NCT. Note that this button is grayed if phone is not connected. See instructions in Nokia Configuration Tool how to connect your device. You will find the downloaded file in folder C:/ Other/ in your device. 8. Open the file with File Manager to install the VPN policy. Go to Menu > Office to launch the File Manager. Select C: Phone memory. 9. Select folder Other and click on the *.vpn file. In this case My_mVPN_config.vpn. Note that you need to have the Nokia Mobile VPN client installed on the device before installing then VPN policy file. 10.Answer Yes to the Install request. Now you are ready to browse using Nokia Mobile VPN. Start the web browser by selecting Web. In VPN toggle version, switch VPN toggle ON. Select Intranet with the name of the policy that you have just installed. You will be asked for your VPN username and VPN password. Key in your credentials and your device is connected to the gateway and you can start browsing your Intranet. See Advanced instructions in case you have problems when connecting to the gateway.
Advanced instructions
In case you do not manage to connect to the gateway please check that you have keyed in the parameter values correctly in Nokia Configuration Tool (NCT). In case you still do not manage to connect to the gateway then please contact your IT Manager in case you work in an enterprise, Internet Service Provider (ISP), or provider of VPN gateway service. In case you do not get the VPN username and password query, then your IKE parameters might be incorrect. Use NCT to try other combinations: Select Advanced button in NCT to go the advanced parameter settings. Select IKE, Proposals and AES128-CBC and then try different combinations with Encryption algorithm and Hash algorithm. Try to connect to the gateway with each of these combinations to find the right one. When you get VPN username and password query the IKE part of the authentication is fine. In case you still have problems to connect to the gateway then you might have issues with the IPsec parameters. To change the IPsec parameters use the NCT tool and select Advanced in NCT. Select IPsec, SAs, My_mVPN_config_1 (name of the policy file) and try different combinations with Encryption algorithm and Hash algorithm. In addition, try with combinations of Perfect Forward Secrecy set ON and OFF. You can also check the VPN log in case you have problem to see where the problem lies. To check the VPN log select Settings > Connectivity > VPN > VPN log. If you still are not able to get the VPN to work, please contact Nokia Support for assistance. Additional information In some cases you might also change other parameters. See the Policy Specification section in Nokia Mobile VPN IT Admin Guide (Nokia Expert Centre's VPN resource hub) for details. Note that a VPN policy file (*.vpn) is a Zip format file consisting of: a policy file and a policy information file, which are just plain text files Optional files: users private key file, users certificate file and CA certificate file. (Certificates are required for other authentication methods besides IKE pre-shared keys (Optional)
Advanced instructions
2012 Nokia. All rights reserved.