Escolar Documentos
Profissional Documentos
Cultura Documentos
Belt Conveyors vertical Raw Mill Kiln general Homogenization station cement process Cement Mill Cement Production Bucket Elevators home home contact us services
Previous Post Screw pump working principle, operation and maintenance Apr05
please concentrate with me , this lecture is easy if you concentrate the lectures for advanced Engineers and beginners and students first I will give you small introduction , then we will talk about the reaction during clinker formation then we will talk about the reaction mechanism , and the kinetics of clinker burning then we will talk about the thermo dynamics of clinker formation 1.Introduction 2.Reaction Pathways Encountered During Clinker Formation Basic Sequence of Reactions Mineralogical and Chemical Characteristics of Raw Mixes Intermediate Products Liquid Phase The Overall Reaction Sequence 3.Reaction Mechanisms 4.Kinetics of Clinker Burning Practical Considerations Assessment of Raw Meal Burnability 5.Thermodynamics of Clinker Formation ================================================================== =====================================================
Introduction:
Why study clinker burning? To understand the influence of changes in kiln operation conditions Normal kiln operation Influence of chemistry, fineness, mineralogy changes Influence of new mix components (pozzolan, AFR, sand, etc.) Abnormal kiln operation know causes of badly burnt clinker understand why rings and deposits form be able to suggest counter measures
Analogy to transformation of igneous and sedimentary rocks into metamorphic rocks Difference in T, p, t
========================================================= ================================== Two principal steps during transformation into clinker Disintegration of original structure Mechanical crushing and grinding Thermal decomposition Structural rearrangement on heating (e.g. polymorphism
Formation of new structures Occurrence of intermediate products Genesis and growth of final clinker minerals Crystallization of liquid phase ========================================================= ============================ Features characterising the clinker formation process -Complex system (series of diverse mechanisms)! -Requires mechanical, thermal and electrical energy -Reaction rate is slow (necessity of high temperatures, finely dispersed material) -Clinker minerals are not stable at normal temperature! -Quality of product is determined by: Clinker chemistry Clinker microstructure ========================================================= =========================== Control of burning process
Material technological aspects -Raw meal burning behaviour Burnability Dust formation Coating behaviour Granulation of clinker etc. -Quantity and properties of liquid phase Process technological aspects -Temperature profile -Kiln atmosphere -Fuel type -Flame characteristics ========================================================= ==========================
Reaction pathway indicates the intermediate products occurring between reactants and products Reaction mechanism type(s) and reaction(s) taking place Reaction kinetics indicates rate at which the final products are produced Reaction thermodynamics dictates whether reaction will be at all possible, and what the heat and temperature requirements will be =================================================================== =====================================================
Now to my linkedin colleges I finished the first part of my lecture if you have any question contact me here or in my linkedin account Or contact me by Email : honestgroupcoltd@gmail.com ======================================================== =========================================
Heating (C) 20 100 100 300 400 900 Evaporation of H2O Loss of physically adsorbed water Removal of structural H2O (H2O and OH groups) from clay minerals
>800 Formation of belite, intermediate products, aluminate and ferrite >1250 Formation of liquid phase (aluminate and ferrite melt) ~1450 Completion of reaction and re-crystallization of alite and belite Cooling (C) 1300 1240Crystallization of liquid phase into mainly aluminate and ferrite =================================================================== ========================================================= Mineralogical characteristics of raw mixes Carbonates calcite CaCO3, dolomite CaCO3 MgCO3, ankerite CaCO3 (Mg,Fe)CO3 magnesite MgCO3, siderite FeCO3
Simple Oxides quartz SiO2, hematite Fe2O3, magnetite Fe3O4 Feldspars potassium feldspars (Na,K)Si3O8 and plagioclase series (Na,Ca)(Si,Al)Al2Si2O8 Sheet silicates minerals of the mica and chlorite groups (e.g. biotite, muscovite, chlorite), clay minerals (e.g. kaolinite, montomorillonite, illite, palygorskite) Hydroxides Al-hydroxides (e.g. boehmite), Fe-hydroxides (e.g. goethite, limonite) Sulfides / sulfates pyrites FeS2, anhydrite CaSO4, gypsum CaSO4H2O Fluorides fluorspar CaF2 =================================================================== =========================
=================================================================== ==========================
Intermediate products encountered during clinker production Type Mineral Name Formula CaSO4
Simple Sulfates
anhydrite
sylvite
mayenite
Calcium Alumino-Silicates
========================================================================================= ================================================
=================================================================== ====================================
Liquid Phase
basically created by early melting compounds such as Fe2O3 and Al2O3 and some minor compounds such as MgO and Alkalis The composition of the raw mix determines -temperature at which liquid will first be formed -amount of liquid formed at any given temperature -the physical properties of the liquid at any particular temperature, especially its viscosity -Although most raw mixes show about the same minimum temperature of liquid formation (eutectic point), the quantity of liquid formed at this and progressively higher temperatures varies according to the raw mix chemistry.
-In the Portland cement relevant parts of the system C S A F, in which melting begins at 1338 C, the composition of the liquid is: CaO SiO2 Al2O3 Fe2O3 - 55 % 6% - 23 % - 16 % Alumina ratio (AR) = 1.38
Quantity calculation formulae acc. to LEA, considering different temperature: 1338 oC = 6.1 Fe2O3 + MgO + Na2O + K2O if AR 1.38 if AR 1.38 for MgO 2 %
1450 oC = 3.0 Al2O3 + 2.25 Fe2O3 + MgO + Na2O + K2O for MgO 2 % Quantitative change of liquid phase with temperature in several group plants (influence of MgO, Na2O and K2O included)
Influence of Al2O3 and Fe2O3 alone on the quantity of liquid formed at 1338 C.
The most effective use of Al2O3 and Fe2O3 with respect to liquid formation at 1338 C occurs when the two are used in the weight ratio of 1.38
Now to my linkedin colleges I finished the second part of my lecture if you have any question contact me here or in my linkedin account Or contact me by Email : honestgroupcoltd@gmail.com ======================================================== ======================================================== =====
Reaction Mechanisms
Definitions State of matter solid: definitive volume and definite shape liquid: definitive volume, assumes shape of container gaseous: neither definitive volume nor definite shape Classification of reactions
1. according to their type: structural change high quartz low quartz decomposition combination CaCO3 CaO + CO2 2CaO + SiO2 C2S
2. according to the state of matter: solid solid solid liquid solid gas liquid liquid liquid gas gas gas quartz and free CaO belite liquid phase crystallisation of aluminate + ferrite CaCO3 CaO + CO2 drying process, volatilisation of alkalis CO + 1/2 O2 CO2
3. according to rate controlling step (kinetics of reaction) diffusion formation of alite quartz + free CaO belite (initial reaction)
Examples Structural changes: Arrangement of the atoms in low and high quartz
Decomposition reactions (during clinker production) -solid / gas type De-hydroxylation of the clay minerals (kaolinite, etc.) De-carbonation of the carbonate minerals (magnesite, dolomite, calcite, spurrite) -solid / solid type decomposition of alite Characteristic of this reaction type is that the single reactant is transformed into two products.
=================================================================== =================================================================== === Decomposition reaction: Equilibrium dissociation pressure of calcite and spurrite with temperature
Decomposition reaction: Decomposition of C3S at 1175 C In the case of impure C3S, i.e. clinker alite, the rate of decomposition is appreciably accelerated by:
the presence of lime and C2S nuclei the presence of Fe2+ , H2O and K2SO4 / CaSO4 melts
Combination reaction: Formation of Belite Belite formation is the result of a combination between the calcite and silica components of the raw mix.
The rate limiting mechanism by which belite is formed (after an initial phase boundary controlled reaction) depends on the diffusion of ions through the solid state. The rate of this reaction is thus dependent on:
Combination reaction: Formation of Alite Formation of alite only at T > 1250 C (lower stability limit). At that temperature, the liquid phase is also starting to form: The formation of alite is a liquid solid reaction
The formation of alite and its stabilisation depends on the presence of the liquid phase. The rate of reaction is dependent on:
the path distance that the diffusing species have to travel quantity and viscosity of liquid phase
Now to my linkedin colleges I finished the third part of my lecture if you have any question contact me here or in my linkedin account Or contact me by Email : honestgroupcoltd@gmail.com ==================================================== ==================================================== =============
Theoretical consequences: Rate increases with higher temperature (but also costs!) Rate decreases with higher activation energy (different raw mix mineralogy) Rate increases with higher frequency factor (larger contact surface, i.e. finer mix) The rate of reaction
increases with temperature and contact surface between raw mix components (frequency factor A) decreases with higher activation energy Ea for raw mix components.
To compensate for the slow reactivity of the less reactive minerals, a higher burning temperature and / or longer burning period (longer clinkering zone) is required.
In practice, the most convenient method of following the reaction is by measuring the rate of decrease of non-combined lime (i.e. free lime). This technique is illustrated in the following figures that show two raw mixes, I and II, of identical chemistry (LS = 95, SR = 3.2 and AR = 2.2) and similar fineness (R200m = 0.5 %, R90m = 7 % and R60m = 15 %). It is evident that the difference in mineralogy and actual particle size of the individual crystals influence both the mechanism and rate of reaction, especially at start of the clinker formation.
Chlorite Illite and Micas Pyrite traces Feldspars Shale A Calcite ~ 40 % Dolomite Quartz ~ 25 % -
================================================================== ================================================================== =========== Assessment of Raw Meal Burnability In practice, simple methods are mostly applied to asses the burnability of a mix, i.e. the ease of formation of the clinker minerals. Three distinct methods are practiced at HGRS: Statistical burning model in which ten material parameters influence the rate of clinker formation. The non-combined CaO value, of any raw mix, relative to that of a standard raw mix is calculated. Physicochemical burning model requires no standard raw mix. Only 4 parameters need to be considered. =================================================================== =================================================================== =========== Statistical Burnability Model
Quantitative evaluation of the data obtained by the Mark burnability test o The 1350, 1400 and 1450 free lime values of other raw mixes from the same raw material components can be determined based on one single burnability test of one mix
o o
Chemical Parameters: lime saturation, silica ratio, alumina ratio, K2O + Na2O, MgO Physical Parameters: residue on 200 m and 90 m sieves, quantity of mica, quartz and iron minerals
NOTE : The burnability model can be used as an instrument for optimization of raw mixes =================================================================== =================================================================== ============== Physiochemical Burnability Model
the amount of uncombined lime depends on o Specific reaction area (area of contact between grains) o Local oversaturation (grain size of individual minerals) o Ambient conditions (pressure, temperature, burning time) o Diffusion coefficient of CaO through the liquid phase (composition of the liquid phase) o Amount of liquid phase formed during burning o Supply and demand of CaO all these influencing factors may be incorporated in four parameters: SR, LS, amount of oversized quartz grains, amount of oversized calcite grains. (Pressure, temperature and burning time are considered to be constant.) Silica ratio (SR) and lime saturation (LS) The formation of C3S from C2S and CaO is governed by the diffusion of CaO through the melt. The silica modules and lime saturation are sufficient to describe this chemical reaction quantitatively. The amount of CaO which can be accommodated within the liquid phase and in which it can diffuse and thus react, is inversely proportional to the silica ratio. A linear relationship exists between max. lime saturation and silica ratio values at which no free lime can be observed. Quartz and calcite grains Whether a grain of material reacts fully under given burning conditions depends on its diameter, structure and chemical composition. Too large calcite grains result in CaO not being completely combined as also results from grains whose lime saturation is over 100 %. For the Holderbank burnability test conditions the following grain diameters were found to be critical limits: o quartz 32 m
calcite 90 m
Now to my linkedin colleges I finished the Fourth part of my lecture if you have any question contact me here or in my linkedin account Or contact me by Email : honestgroupcoltd@gmail.com ==================================================== ==================================================== =============
400 900 Removal of structural H2O (H2O, OH groups from clay minerals) Endothermic
600 900
> 800 Formation of intermediate products, belite, aluminate and ferrite > 1250 Formation of liquid phase (aluminate and ferrite melt) of alite Exothermic
EndothermicFormation
1300 1240 Crystallization of liquid phase into mainly (cooling cycle) ferrite Exothermic
aluminate and
Examples for exothermic reactions (heat liberated) o Coal (C) + O2 CO2 o Lime (CaO) + H2O Ca(OH)2 o Cement + H2O Cement Hydrates o Liquid K2SO4 Solid K2SO4 Examples for endothermic reactions (heat absorbed) o H2O (liquid) H2O (steam) o CaCO3 CaO + CO2
=================================================================== =================================================================== ===================== DTA curves of typical cement raw meals The greatest heat requirement occurs between 850 900 C, i.e. for the decomposition of the carbonate minerals.The total heat requirements for dehydration, decarbonisation and melting exceed the heat liberated by the formation of belite and the intermediate and final products.
2050
Exothermic processes
-40 -420
Total exothermic
-2550 + 1765
============================================================= ===================================================== Heat balance of wet and dry kiln, kJ/kg clinker ( HFW Taylor: Cement Chemistry, 1998 )
Dry kiln
Wet kiln 13 (0.4%) 2,364 (54.6%) 1,741 (21.5%) 812 (41.5%) (30.5%) (12.3%)
1,807
Heat losses through 711 gas, clinker, dust, etc. Heat lost in air from cooler Heat losses by radiation and convection 3,306 kJ/kg 5,699
427
(13.0%)
100
(1.7%)
348
(10.5%) 682
(12.0%)
kJ/kg
============================================================= =========================================================
Related posts:
1. 2. 3. 4. Raw Mix Optimization Production of fused corundum refractories Burners and Flames FLS , Pillard , KHD , Calculation of Burner Momentum Refractory performance indicators
Leave a Reply
You must be logged in to post a comment. Powered by WordPress and the Graphene Theme.