Você está na página 1de 2

NTE1116 Integrated Circuit Audio Power Amplifier, 5W

Description: The NTE1116 is a monolithic integrated circuit designed for use as a low frequency class B amplifier. The external cooling tabs enable 2.5 watts of output power to be achieved without the use of an external heat sink and 5 watts of output power using a small area of the P.C. board copper as a heat sink. Absolute Maximum Ratings: Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Output Peak Current (NonRepetitive), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A Output Current (Repetitive), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A Power Dissipation, Ptot TA = +70C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W Ttab = +100C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5W Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 to +150C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 to +150C Thermal Resistance, JunctiontoTab, RthJTAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12C/W Thermal Resistance, JunctiontoAmbient (Note 1), RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . 70C/W Note 1. Obtained with tabs soldered to printed circuit with minimized copper area. Elecrtrical Characteristics: (TA = +25C, VS = 24V, RL = 16 unless otherwise specified)
Parameter Quiescent Output Voltage (Pin12) Quiescent Drain Current Input Bias Current (Pin8) Output Power Input Saturation Voltage Input Sensitivity Input Resistance (Pin8) Frequency Response (3dB) Total Harmonic Distortion Voltage Gain (Open Loop) Voltage Gain (Closed Loop) Symbol VO Id Ib PO Vi(rms) Vi Ri B THD GV GV PO = 5W, f = 1kHz f = 1kHz C3 = 330pF PO = 50mW to 2.5W, f = 1kHz f = 1kHz f = 1kHz THD = 10%, f = 1kHz Test Conditions Min 11 4.4 220 Typ 12 9 1 5.0 80 5 Max Unit 13 20 5 V mA A W mV mV M Hz % dB dB

40 to 20,000 39 0.5 80 42 45

Elecrtrical Characteristics (Contd): (TA = +25C, VS = 24V, RL = 16 unless otherwise specified)


Parameter Input Noise Voltage Input Noise Current Efficiency Supply Voltage Rejection Symbol eN iN SVR PO = 5W, f = 1kHz fripple = 100Hz, C5 = 25F fripple = 100Hz, C5 = 100F Drain Current Id PO = 5W Pin Connection Diagram Test Conditions B = 22Hz to 22kHz Min Typ 5 0.2 75 35 38 280 Max Unit V nA % dB dB mA

VCC 1 N.C. 2 VCC 3 Tab

12 Output 11 N.C. 10 GND Tab

Bootstrap 4 Compensation 5 Feedback 6

9 Substrate GND 8 Input 7 Ripple Rejection

.247 (6.27)

12

.677 (17.2)

.770 (19.5) Max

.260 (6.6)

.233 (5.9) Max

.100 (2.54) .700 (17.78)

.099 (2.5) Min

Você também pode gostar