Escolar Documentos
Profissional Documentos
Cultura Documentos
Customer : SONY
SAMSUNG -LCD SAMSUNG TFT TFT-LCD
NOTE :
APPROVAED BY
Customers Approval
SIGNATURE DATE PREPARED BY
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
1 / 31
Contents Revision History -------------------------------------------------------------------------------------------- (3) General Description --------------------------------------------------------------------------------------- (4) General Information --------------------------------------------------------------------------------------- (4) 1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5) 2. Optical Characteristics --------------------------------------------------------------------------------- (6) 3. Electrical Characteristics ------------------------------------------------------------------------------- (9) 3.1 TFT LCD Module 3.2 Back Light Unit 4. Block Diagram ------------------------------------------------------------------------------------------- (11) 5. Input Terminal Pin Assignment --------------------------------------------------------------------- (12) 5.1 Input Signal & Power 5.2 Balance Board 5.3 LVDS Interface 5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color 6. Interface Timing ---------------------------------------------------------------------------------------- (20) 6.1 Timing Parameters (DE only mode) 6.2 Timing Diagrams of interface Signal (DE only mode) 6.3 Power ON/OFF Sequence 7. Outline Dimension -------------------------------------------------------------------------------------- (23) 8. EMI Specification --------------------------------------------------------------------------------------- (25) 9. Spread Spectrum Specification 10. UL Approval 11. Reliability Test ----------------------------------------------------------------------------------------- (26) 12. Packing ------------------------------------------------------------------------------------------------ (27) 13. Marking & Others ------------------------------------------------------------------------------------- (28) 14. General Precaution ---------------------------------------------------------------------------------- (29) 14.1 Handling 14.2 Storage 14.3 Operation 14.4 Operation Condition Guide 14.5 Others
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
2 / 31
* Revision History
Date Sep. 07, 2007 Rev. No 000 Page Summary
First Issued
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
3 / 31
General Description
Description LTY[Z]460HB01 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 46.0 is 1920 x 1080 and this model can display up to 1.07 billion colors with wide viewing angle of 89 or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and High Definition TV (HDTV). Features RoHS compliance (Pb-free) 1.07(True-10Bit) Color Support High contrast ratio, high aperture ratio, fast response time SPVA (Super Patterned Vertical Align) mode Wide viewing angle (89) High speed response Full HD(1920 x 1080 pixels) resolution (16:9) Low Power consumption 24 High color gamut CCFTs (Cold Cathode Fluorescent Tube) DE(Data Enable) mode Mini-LVDS (Mini Low Voltage Differential Signaling) interface
General Information
Items Module Size Weight Pixel Pitch Active Display Area Surface Treatment Display Colors Number of Pixels Pixel Arrangement Display Mode Luminance of White Specification 1083.0(HTYP) x 627.0(VTYP) 57.1(DMAX) 16000(Max) 0.53025(H) x 0.17675(W)*3 1018.08(H) x 572.67(V) DSLR(3H) 1.07 billion(True-10Bit) 1920 x 1080 RGB vertical stripe Normally Black 550 cd/m2 Refer to Page 6 colors pixel Unit mm g mm mm Note 1.0mm
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
4 / 31
Max. 13 65 50 65 40 30 1.5
Unit V G G
VNOP
Note (1) Ta= 25 2 C (2) Temperature and relative humidity range are shown in the figure below. a. 93.8 % RH Max. (Ta 40 C) b. Maximum wet-bulb temperature at 40 C or less. (Ta 40 C) c. No condensation (3) Polarizer will not be damaged in this range, even though abnormal visual problems occur in TSUR range. (4) 11ms, sine wave, one time for X, Y, Z axis (5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
Fig. Temperature and Relative humidity range MODEL LTY[Z]460HB01 Doc. No 05-000-S-070907 Page 5 / 31
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent. Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
(Ta = 25 2C, VDD=12V, fv= 60Hz, fDCLK=148.5MHz, Dim = 90%)
Item Contrast Ratio (Center of screen) Rising Response Time Falling G-to-G Luminance of White (Center of screen) Red Symbol C/R Tr Tf Tg YL Rx Ry Gx Gy Bx By Wx Wy Hor. Viewing Angle Ver. L R U D C/R10 79 79 79 79 Normal L,R=0 U,D=0 Viewing Angle TYP. -0.03 Condition Min. (1000)* 450 Typ. 1700 10 6 8 550 (0.651)* (0.324)* (0.211)* (0.662)* (0.148)* (0.059)* (0.274)* (0.274)* 90 (11800)* 2.2 89 89 89 89 % (4) SR-3 Degree (8) SR-3 % K (7) SR-3 (7) SR-3 TYP. +0.03 (7),(8) SR-3 Max. 16 10 cd/m2 (6) SR-3 msec (5) BM-7 Unit Note (3) SR-3
Green
Blue
Brightness Uniformity Buni 23 (9 Points) * marked Items will be decided after taking data of early mass production.
Note (1) Test Equipment Setup The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen. Single lamp current @ IL = 6.5mArms(typ.), Dim = 90% Environment condition : Ta = 25 2 C
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
6 / 31
Field 1 2
Photo detector
540
900
Note (3) Definition of Contrast Ratio (C/R) : Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel
C/R=
G max G min
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
7 / 31
Buni = 100
Bmax : Maximum brightness Bmin : Minimum brightness Note (5) Definition of Response time : Sum of Tr, Tf Display data
Black (data off) White (data on) White (data off)
TF
10% 0% TIME Note (6) Definition of Luminance of White : Luminance of white at center point Note (7) Definition of Color Chromaticity (CIE 1931) Color coordinate of Red, Green, Blue & White at center point Note (8) Definition of Viewing Angle : Viewing angle range (C/R 10)
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
8 / 31
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected. Ta = 25C 2 C
Item Voltage of Power Supply Current of Power Supply (a) Black (b) White (c) Mosaic fV fH fDCLK IRUSH IDD Symbol VDD Min. 11 47 50 130 Typ. 12 800 1200 1000 60 67.5 148.5 Max. 13 1300 63 75 155 3 Unit V mA mA mA Hz kHz MHz A (4) (2),(3) Note (1)
Note (1) The ripple voltage should be controlled under 10% of VDD. (2) fV=60Hz, fDCLK = 148.5MHz, VDD = 12.0V, DC Current. (3) Power dissipation check pattern (LCD Module only) a) Black Pattern b) White Pattern c) Mosaic
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
9 / 31
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value. [Operating condition : Ta = 252, IL =6.5mArms(typ.), For single lamp only. ]
Socket
HOT 1 HOT 2 HOT 1 HOT 2
Socket
Balance Board
HOT 23 HOT 24
LCD Module
Balance Board
HOT 23 HOT 24
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
10 / 31
SSC SSC
FPC
SOURCE PCB
DC/DC DC/DC CONVERTER CONVERTER GAMMA GAMMA GEN GEN
460HT PANEL
1920 x 1080 x RGB
FPC
CONTROL DATA VIN(12.0V) AVDD Von/Voff VCOM Voltage VCC(1.8V) VCC(3.3V)
SOURCE PCB
CONTROL PCB
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
11 / 31
LOW/OPEN : ACC ON
B-INT : I2C BUS RELEASE L/OPEN H SDA/SCL LINE BECOME HI-Z USER CAN ACCESS EEPROM
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
12 / 31
DCC SELECTION
DCC Look Up Table Selection Pin N.O. 49 0 0 0 Select bit 0 1 1 1 1 TCON Ready Operation Low High High Low Description Normal Operation Error Operation 48 0 0 1 1 0 0 1 1 47 0 1 0 1 0 1 0 1 Description 60Hz*175% 60Hz*50% 50Hz*175% 50Hz*50%
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
13 / 31
PCB
#1
#51
connect name
#1 #51
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
14 / 31
Symbol
Unit
Note
53 150 20 4200
kHz Hz
%
Vrms
(1) Striking Voltage( HVSTRIKE ) based on CCFL spec. for ambient temperature. Soft rising time must be - at starting time Tsoft > 300msec - at PWM dimming condition Trise < 100usec
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
15 / 31
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
16 / 31
Supply Voltage
VCC
11
12
15
Lamp
IOC
20
mA
Vcc-1 VLD
V @Vcc = 12 [V]
Lamp Detection
Low (LD)
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
17 / 31
Odd Data
R4 R5 R6 R7 R8 R9 G4 G5 G6 G7 G8 G9 B4 B5 B6 B7 B8 B9 HSYNC VSYNC DEN R2 R3 G2 G3 B2 B3 RESERVED R0 R1 G0 G1 B0 B1 RESERVED
Even Data
R4 R5 R6 R7 R8 R9 G4 G5 G6 G7 G8 G9 B4 B5 B6 B7 B8 B9 HSYNC VSYNC DEN R2 R3 G2 G3 B2 B3 RESERVED R0 R1 G0 G1 B0 B1 RESERVED
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
18 / 31
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL COLOR DISPLAY RED GREEN BLUE
R R R R R R R R R R G G G G G G G G G G B B B B B B B B B B 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
GRAY SCALE LEVEL R0 R1 R2 R3~R1020 R1021 R1022 R1023 G0 G1 G2 G3~G1020 G1021 G1022 G1023 B0 B1 B2 B3~B1020 B1021 B1022 B1023
BLACK BLUE GREEN BASIC COLOR CYAN RED MAGENTA YELLOW WHITE BLACK DARK GRAY SCALE OF RED LIGHT RED BLACK DARK GRAY SCALE OF GREEN LIGHT GREEN BLACK DARK GRAY SCALE OF BLUE LIGHT BLUE
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
Note) Definition of Gray : Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level) Input Signal : 0 = Low level voltage, 1 = High level voltage
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
19 / 31
6. Interface Timing
6.1 Timing Parameters ( DE only mode )
SIGNAL Clock Hsync Vsync Active Display Period Vertical Total Active Display Period Horizontal Total Frequency ITEM SYMBOL 1/TC FH FV TVD MIN. 130 50 47 TYP. 148.5 67.5 60 1080 MAX. 155 75 63 Unit MHz KHz Hz lines NOTE -
TVB
1100
1125
1480
Lines
THD
1920
clocks
TH
2154
2200
2450
clocks
Note) This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation. (1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system (2) Internal VDD = 3.3V
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
20 / 31
DE
TH THD
DE
DCLK
TC
DATA SIGNALS
TC TCH TCL
DCLK
TDS TDH
0.5 VCC
DISPLAY DATA
TES
0.5 VCC
DE
0.5 VCC
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
21 / 31
T2
T3 T4
VALID
0V 1000msT5 (Recommend Value) 100msT6 (Recommend Value) 0<T7T5-10msec 100ms T8
Power On
T5 T6
50%
50%
T7 0V
T-Con Ready VTh= 0.1VT-Con Ready VTh= 0.9 DCC LUT Selection Bit T8 DCC LUT Selection Enable Period
T1: VDD rising time from 10% to 90% T2: The Time from VDD to data at power On. T3:The time from valid data off to VD0 off at power off. T4: VDD off time for TV SET restart T5: The time from valid data to B/L enable at power ON. T6: The time from valid data off to B/L disable at power off. T7: The time from Vin to T-Con Ready T8 : The Time from Valid Data to DCC LUT Selection Enable Period.
The supply voltage of the external system for the Module input should be the same as the definition of VDD. Apply the lamp voltage within the LCD operation range. When the back light turns on before the LCD operation or the LCD turns off before the back light turns off, the display may momentarily show abnormal screen. In case of VDD = off level, please keep the level of input signals low or keep a high impedance. T4 should be measured after the Module has been fully discharged between power off and on period. Interface signal should not be kept at high impedance when the power is on.
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
22 / 31
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
23 / 31
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
24 / 31
8. EMI Recommendation
: -3dB at CISPR22 Class B This EMI Recommendation is recommended to be measured at SET Condition.
10. UL Approval
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
25 / 31
[ Result Evaluation Criteria] Under the display quality test conditions with normal operation state, these shall be no change which may affect practical display function. HTOL/ LTOL THB HTS/LTS WHTS : High/Low Temperature Operating Life, : Temperature Humidity Bias : High/Low Temperature Storage : Wet High Temperature Storage
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
26 / 31
12. PACKING
12.1 CARTON (Internal Package)
(1) Packing Form Corrugated fiberboard box and corrugated cardboard as shock absorber (2) Packing Method
Pallet
LCD Packing
10 ea / (PackingPallet Box)
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
27 / 31
LTY[Z]460HB01
40mm
week year
xxx
XXXXXXXXXX
Revision code
LTY[Z]460HB01XXXX
Lot number
80mm
LTY[Z]460HB01
XXXX
10
Part number
Revision code
0703
(6) Others 1. After service part Lamps cannot be replaced because of the narrow bezel structure. MODEL LTY[Z]460HB01 Doc. No 05-000-S-070907 Page 28 / 31
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
29 / 31
14.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time. It is highly recommended to store the Module with temperature from 0 to 35 and relative humidity of less than 70%. (b) Do not store the TFT-LCD Module in direct sunlight. (c) The Module should be stored in a dark place. It is prohibited to apply sunlight or fluorescent light in storing.
14.3 Operation
(a) No Connection or disconnect the Module in the "Power On" condition. (b) Power supply should always be turned on/off by the "Power on/off sequence" (c) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference should be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference. (d) The cable between the back light connector and its inverter power supply should be connected directly with a minimized length. A longer cable between the back light and the inverter may cause lower luminance of lamp(CCFT) and may require higher startup voltage(Vs).
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
30 / 31
14.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation. (b) Avoid condensation of water. It may result in improper operation or disconnection of electrode. (c) Do not exceed the absolute maximum rating value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged. (d) If the Module keeps displaying the same pattern for a long period of time, the image may be "sticked" to the screen. To avoid image sticking, it is recommended to use a screen saver. (e) This Module has its circuitry PCB's on the rear side and should be handled carefully in order not to be stressed. (f) Please contact SEC in advance when you display the same pattern for a long time.
MODEL
LTY[Z]460HB01
Doc. No
05-000-S-070907
Page
31 / 31