Escolar Documentos
Profissional Documentos
Cultura Documentos
http://www.ullrich.co.nz/rolled/rpmech11.php
Rolled Aluminium Products, Sheet Metal, Plate Metal and Rollformed Metal
Tensile Strength (MPa) Ultimate Max. 385 Yield Min. Yield Max. Elongation (% min in 50mm or 5.65 5 2
3
Up To 0.50 3.25 12.00 25.00 0.50 6.00 25.00 0.50 6.00 25.00 0.50 12.00 25.00
6061 - O
6061 - T4
6061 - T42
12
Thickness (mm) Over Up To 0.30 0.80 1.30 5.00 0.50 0.80 1.30 Ultimate Min. 75 75 75 75 100 100 100
Tensile Strength (MPa) Ultimate Max. 105 105 105 105 135 135 135 Yield Min. Yield Max. Elongation (% min in 50mm or 5.65 16 20 25 30 3 4 6 > )
3
8011 - O
8011 - H12
1 of 2
01-May-2013 6:49 PM
http://www.ullrich.co.nz/rolled/rpmech11.php
1.30 3.00 8011 - H14 0.20 0.50 0.80 1.30 3.00 8011 - H16 0.20 0.50 0.80 1.30 3.00 8011 - H18 0.20 0.50 0.80 1.30 Footnotes:
3.00 6.00 0.50 0.80 1.30 3.00 6.00 0.50 0.80 1.30 3.00 6.00 0.50 0.80 1.30 3.00
100 100 115 115 115 115 115 140 140 140 140 140 160 160 160 160
135 135 150 150 150 150 150 170 170 170 170 170
8 9 2 3 4 5 7 1 2 3 4 5 1 2 3 4
1. Mechanical test specimens are taken as detailed under Sampling and Testing. 3. A = Cross-sectional area of specimen. 5. These yield strengths are not determined or guaranteed unless specifically requested. 11. Annealed (O temper) material shall, upon heat treatment or heat treatment and ageing, be capable of developing the mechanical properties applicable to T42 or T62 temper material respectively. 12. Material heat-treated (T42) or heat-treated and aged (T62), from any temper by the user, should attain the mechanical properties applicable to these tempers.
Australia
Visit our Sales Centres Visit www.ullrich.com.au Phone: 1300 650 075 (Within AU) Email: general enquiry form
2 of 2
01-May-2013 6:49 PM