Você está na página 1de 44

Title

End-to-End Functional Capability Specification for Inter-PLMN Roaming (Stage 3 Testing)

IR24 General

1(46)

IR2461

Security Classification Category Non-Confidential - Industry

Information Category
Unrestricted

Roaming - Technical

This document is subject to copyright protection. The GSM MoU Association (Association) makes no representation, warranty or undertaking (express or implied) with respect to and does not accept any responsibility for, and hereby disclaims liability for the accuracy or completeness or timeliness of the information contained in this document. The information contained in this document may be subject to change without prior notice. Access to and distribution of this document by the Association is made pursuant to the Regulations of the Association.

Copyright of the GSM MoU Association 1992

Document History
Version Draft Issues Issue 1.01.01 to 1.04.00: Version 2.00.00 Version 2.01.00 Version 2.01.01 Version 3.00.00 Version 3.01.00 Version 3.02.00 Version 3.03.00 Version 3.04.00 Version 3.05.00 Version 3.06.00 Brief Description For Ad Hoc group discussion For IREG Discussions Incorporates comments from GSM Association Plenary Incorporates comments from IREG August 1992 Editorial Corrections Approved MoU 21 Approved MoU 23 Includes CRs 1, 2, 3 and 4 Approved MoU 24 Includes CRs 5, 6, 7 and 8 Approved MoU 25 Includes CRs 9 and 10 Approved MoU 30 Includes CR11 Approved MoU31 Includes CR.12 Approved MoU 40 Includes CR.13 To modify 2.1.6 (PSTN Telephone in Country Containing PLMN(b) Calls MS(A), which had roamed to VPLMN(b), But is not able to respond to paging) for Pre-paging proposed from NTT DoCoMo. IREG Doc 46/027 NCR 016 to IR.24 Ver.3.7.0 for Clarification of Roaming Scenario to be Tested incorporated IREG Doc 46/027 Incorporated Date Oct - Dec 1991 Dec 1991 May 1992

27th July 1992 25th August 1992 7th September 1992 21st September 1992 31st March 1993 30th June 1993 15th February 1994 24th March1995 Unknown 20th Oct 1998

Version 3.06.01

3rd July 2000

Version 3.06.02 Version 3.07

3rd July 2001 1 December 2003


st

IR24 General

2(46)

IR2461

Version 3.07.01 Version 3.08 Version 4.0 Version 4.1

Signal Doc 30_007_rev 1 Major CR 031 to IR.24 Change Request incorporated, to include SMS Interworking tests as Appendix C and D. IREG Doc 48/054 Incorporated Approved CR30_007 IREG Doc 48/054 NCR 029 to IR.24 for Testing of CLI Delivery incorporated. IREG Doc 48/013_Rev 1 NCR 028 to IR.24 incorporated. additional corrections in setups of sheetGENERAL,TEST CASE PAGE, TEMPLATE PAGE after converting from WORD to EXCEL Changed IR24 from Word to EXCEL within GSMA Open Connectivity project IREG Doc57_054 incorporated MCR034 change in "Stage 4" references corrected to "Stage 3"

Nov 13th 2006 11th February 2005 5th September 2006 3rd August 2007

Version 4.1.01 Version 5.0 Version 6.0 Version 6.1

14th July 2008 12th March 2008 30th November 2009 11th July 2012

1
1.1

INTRODUCTION
Scope of Document
This document is the specification of IREG End-to-end Functional Capability tests relating to the international roaming of a Mobile Station, belonging to a home PLMN(a), to and within a visited PLMN(b). Whilst it is expected that roaming will be a bilateral activity between two PLMNs, please note that this document is written in a unidirectional context. Hence Roaming is taking place by a MS(a) to VPLMN(b) only. There is no reference to a Mobile Station MS(b) visiting PLMN(a). To complete IREG End-to-end Functional Capability tests for bilateral roaming, it is necessary to perform the tests in this document twice: the second time the real identities of PLMN(a) and PLMN(b) are swapped. IREG Document PRD IR23 defines the scope and purpose of each stage of testing. This document does not cover: SCCP testing Exchange of PLMN numbering, addressing and routing data [see Stage 3: IREG PRD IR23] Testing of Transferred Account Procedure, billing applications and any inter-PLMN financial statement; [see TADIG PRD TD06]. However the production of a Toll Ticketing file, for use in the TADIG Stage 3 testing is included. Definition of operation and maintenance procedures such as contact points for fault reporting and notification of planned works. [see Stage 3: IREG PRD IR23]

The Scope of this issue of the document extends to GSM Association Phase 1 services only.

1.2.

Abbreviations
The following abbreviations are used: PLMN ("Public Land Mobile Network") including RSS ("Radio Sub-System") and NSS ("Network Sub-System"). PLMN (a) indicates the "ath" PLMN. VPLMN ("Visited PLMN") HPLMN ("Home PLMN") HLR ("Home Location Register") VMSC ("Visited Mobile Services Switching Centre"), including the always co-located entities MSC ("Mobile Services Switching Centre") and VLR ("Visitor Location Register") GMSC ("Gateway Mobile Services Switching Centre") MS ("Mobile Station"). MS (b) indicates that the MS subscription is managed by PLMN(b) PSTN telephone (b) indicates a PSTN telephone in the country which contains PLMN (b) DN ("Directory Number")

The terms "visitor" and "roaming" are equivalent through the document.

IR24 General

3(46)

IR2461

1.3. Objective of Tests


The fundamental objective of this testing is to confirm the capability, and sample the quality of service which GSM users will receive when roaming from their Home PLMN (a) to PLMN (b). Consequently the tests are restricted to top-level capability testing. There is no provocative or inopportune behavior testing: this type of testing forms part of the Stage 1 testing [see IREG PRD IR23]. Because the testing is at a top-level, its scope includes checking the correct working of user features and any network features required by the HPLMN (e.g. barring). The scope also includes the confirmation of acceptable quality of transmission, absence of echo and call set-up delay. The overall objective of the tests is to confirm that the functions and features, which are already known to operate correctly within each separate PLMN, will also operate correctly for Inter-PLMN roaming. When there is no difference in a PLMN's operation between Home and Visiting MSs, then there is no requirement to confirm successful operation during Stage 3 Testing - an example of this is "handover." In addition where a feature involves only the Gateway MSC and HLR, (both located in the HPLMN), then there is no requirement to test during Stage 3. The specific objectives are to prove that: (a) (b) "Location updating" and the associated "Inserting of Subscriber data" can be successfully completed for MS (a) roaming to PLMN (b). In addition, that the "cancel location" service operates correctly. Incoming speech calls to MS (a) can be handled by: (i) (ii) (iii) c) HPLMN(a) asking for Roaming Number from VPLMN (b) HPLMN(a) successfully routing the call VPLMN(b) connecting the call

Outgoing speech calls by MS(a) to the VPLMN(b) are handled for: (i) (ii) (iii) (iv) Emergency calls Calls to VPLMN(b) country (i.e. local calls) International calls Calls to any other/relevant "Operator Services" on VPLMN(b)/PSTN(b)

(d) (e)

Supplementary Services can be registered and activated, and their status interrogated by the MS (a). Specific Supplementary Services can be invoked successfully: (i) (ii) (iii) (iv) (v) (vi) (vii) Call Barring: All Outgoing Calls Call Barring: Outgoing International Calls Call Barring: Outgoing International Calls except to Home Country Call Forwarding on not reachable (Before IMSI detach) Call Forwarding on Not reachable (After IMSI detach - If Attach/Detach supported by VMSC) Call Forwarding on Busy Call Forwarding on No Reply

(f) (g) (h)

Specific Supplementary Services can be activated by a MS which is roamed. Barring of Incoming Calls when roamed Short Message Service is available between Home Country Service Centre and roamed mobile station.

If either the HPLMN or VPLMN contain GSM Network Entities which are supplied by more than one manufacturer, then the test cases should be repeated for each manufacturer. Therefore if HPLMN(a) contains HLR and GMSC from "m" suppliers, and the VPLMN(b) contains VMSC from "n" suppliers, then potentially the tests should be performed m*n times. The actual number of repeats of the test cases is for bilateral agreement between the HPLMN and VPLMN. However if agreement is not straightforward, it is for the HPLMN to decide the scope of the repeating of test cases, because it is ultimately responsible to its customers for the service supported when roaming.

An associated optional objective is to use the Toll Ticketing function of the VMSC to generate a live data file, which is used by the TADIG Stage 3 testing. After transfer to the HPLMN via TADIG processes, the HPLMN may use the information from the test results to validate the details of the Toll tickets, however this is not part of the GSM Association IREG roaming testing.

1.4. Strategy for Testing


In order to maximize the efficiency of testing, the test cases have been drawn up so as to minimize the requirement for simultaneous joint activity by both PLMN (a) and PLMN (b).

Accordingly, the program of testing forms three distinct components. (i) (ii) (iii) HPLMN(a) issues pre-programmed SIMs and programmed HLR PLMN(b) performs tests PLMN(b) and HPLMN(a) discuss results.

It is recognized that some parts of this specification are of greater priority than others. The test cases concerning the Basic Service" (Section 2.1) are of greater priority than those for the Supplementary Services (Section 2.2).

It is anticipated that further updated issues will be made in response to IREG comments and following experience of testing. It is anticipated that further Issues will be needed to extend the testing beyond GSM phase 1.

IR24 General

4(46)

IR2461

1.5

Equipment Requirements
The Equipment described in this Section is necessary for undertaking the test cases described in Section 2.

1.5.1
(a) (b) (c)

User Equipment
Two Mobile Equipments supplied by VPLMN(b) Two PSTN telephones in PSTN(b) Two SIMs supplied by HPLMN(a). The supply of additional SIMs may be agreed by the HPLMN(a) and VPLMN(b), typically for the purposes of: (i) (ii) Spare cards in case of failure Allocation from different HLRs

(d)

Two SIMs supplied by VPLMN(b) It is expected that manual selection will be used to select VPLMN(b) when using the SIMs supplied by HPLMN(a). To facilitate subsequent automatic selection it is required that bits b6 and b5 of byte 2 of the SIM Service Table (Data-field 38) be set to "1", and the chosen VPLMN is in the PLMN Selector (Data-field 30) In order to replicate the service that general roamers will encounter, it is required that any SIM used in the tests shall have one access class out of the classes 0-9 defined. No other access class (e.g. 10 or 11-15) shall be defined. It is recommended that on any new SIM the Location Update Status field is set to "Status not updated" before the tests start (bit b2 set to "0" and bit b1 set to "1", of byte 11 of Data-field 7E).

1.5.2
(a)

Test Equipment
The availability of a CCITT # 7 tester able to decode SCCP, TCAP and MAP is highly advisable, but not strictly necessary for these tests. However it is essential for any analysis of test case failures. Clock capable of being used to allow testing personnel to record call start and chargeable start ( i.e. answer) time of calls to an accuracy of better than five seconds. If possible, the clock shall be adjusted to be in alignment with the internal MSC clock which is used for the Toll Ticketing function. Stopwatch capable of measuring perceived chargeable duration of calls to an accuracy of one second.

(b) (c)

IR24 General

5(46)

IR2461

TEST CASES
The test cases are in three groups: Basic Service (Mobility Management and Telephony) Supplementary Services Short Message Service (Point to point) The test configuration is shown in Figure 1 below. It is anticipated that it may be necessary to monitor both signaling messages and voice calls on any of the Network Entity interfaces shown in the diagram. However this is not a firm requirement for this test specification. The results of the test cases shall be recorded in Appendix A.

Figure 1: Test case Configuration

1. regular scenario is PSTN (b2) > MS1 (a) w. Call Forw. to > PSTN (b1) 2. regular scenario PSTN (b2) > MS1(a) 3. regular scenario MS1(a) > MS2(a) 4. Regular scenario MS1(a) > PSTN (c1) 5. Regular scenario MS1(a) > PSTN (a) To provide valid toll ticketing recording, then both the clock used to note call start and finish times for the test result sheets, and the internal VMSC clock must be checked against each other and set to an accuracy of better than five seconds. Note the VMSC clock must only be altered in conjunction with local operating rules and procedures because all Toll Tickets will be affected by any alteration.

2.1

Basic Service Test Cases


It should be noted that no supplementary services are active during the Test cases which are described in Section 2.1.

2.1.1

Location Update by MS(a) in VPLMN(b)

Preconditions:

MS1 contains SIM of HPLMN(a) No VLR record exists for MS. HLR record contains basic and supplementary service information. Power-up MS1(a) and perform location registration on VPLMN(b) Check VLR record for the IMSI/MSISDN of MS1. Successful result if VLR record is identical to the pre-testing information supplied by PLMN(a). Unsuccessful result if any of the basic and supplementary services tested by this document or all of the information is missing. This test case confirms operation of Update Location and Insert Subscriber Data procedures. It checks the support of the relevant MAP operations, TCAP processes and SCCP addressing for both E214 and E164 Global Titles, between the HLR(a) and VMSC(b).

Action:

Expected Reult:

Comments:

IR24 General

6(46)

IR2461

2.1.2

Operator Control of Service

A) Location Cancellation for MS(a) Subscription held in VPLMN(b). Preconditions: Action: VLR in VPLMN(b) contains subscription information for MS(a) Establish a MOC from MS(a). HPLMN(a) personnel deletes MS(a) subscription from HLR either using HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR. Check VLR for record of MS(a).

Expected Result: Successful result if VLR record for MS (a) has been erased and when the established MOC is cut. Comments: This test case confirms that the "cancel location" procedure operates correctly and cuts the established call.

B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
Preconditions: Action: VLR in VPLMN(b) contains subscription information for MS(a) HPLMN(a) personnel activates ODB for All Outgoing Calls and All Incoming Calls when on Roaming for MS(a) from HLR either using HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR.

Expected Result: Successful result if VLR record for MS(a) contains ODB information and none of the call attempts is successful. Comments: This test case confirms that ODB procedures operate correctly.

2.1.3

MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)

Preconditions: Action:

MS1(a) and MS2(a) have location updated successfully in VPLMN(b). MS1(a) establishes call to MS2(a). Call answered and held for one minute. Quality assessed.

Expected Result: Successful result if call is established in 30 seconds, and call is stable in unanswered and answered phases, and there is no perceptible echo to either user, and call remains in intelligible/high quality conversation phase for one minute. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario. Comments: This test case confirms Mobile Originated and Mobile Terminated call sequences for roamers. It checks the support of the Provide Roaming Number MAP operation between PLMN(a) and PLMN(b). It checks the ability to establish international call between the two PLMNs using roaming numbers. It implies the ability of the PLMNs to disable excessive instances of echo control devices.

2.1.4

PSTN Telephone In Country Containing PLMN(b) Calls MS1(a), Which Has Roamed To VPLMN(b), But The VLR Has Lost The Record For MS1(a).
PSTN Telephone(b2) Calls MS1(a) (VLR has lost the record for MS1(a) )

Preconditions:

MS1(a) does not have a record in VMSC(b) but HLR(a) indicates that MS1 (a) is roamed to VMSC(b). MS1(a) is active, but has not location updated in (periodic, normal or IMSI attach) since VLR record was removed.

Action:

PSTN telephone(b2) calls MS1(a). If call is successfully established, then maintain answered call for one minute. Assess quality. If call attempt returns "System Failure" message, then make MS1(a) perform a location update, and repeat this test case.

Expected Result: Successful result if either first call-attempt is established or "System Failure" message is returned within 30 seconds. In addition the answered call, whether establish on the first attempt or after the location update, has no perceptible echo to either user, and that an acceptable quality connection can be maintained. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.

Comment:

This test case confirms the VLR recovery mechanism, which may use the Send Parameters MAP operation. It also checks that the Gateway MSC (in PLMN(a)) correctly inserts an echo cancellation device, and implies that other instances of echo control devices have been correctly configured.

2.1.5

PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Has Performed IMSI Detach.
PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - IMSI Detached (Power off)

Precondition: Action:

MS(a) is detached or deregistered in the VLR in VPLMN(b) but VLR(b) contains a record for MS(a) Check that the subscriber is detached in the VLR, if possible. Attempt a call from PSTN telephone(b2) to MS1(a)

Expected Result: Successful result if PSTN telephone(b2) receives an announcement that MS1(a) cannot be reached or is unavailable.

IR24 General

7(46)

IR2461

Comments:

This test case confirms that the "absent subscriber" reason is given as the result of a roaming number enquiry to the VLR(b) where the MS(a) has performed an IMSI detach. The detach status of the subscriber should be checked in the VLR, because the switching-off procedure of a Mobile does not guarantee that the subscriber will be detached, because no acknowledgement message is sent from the VLR to the MS. The announcement may be in the language of PLMN(a), as it can be raised at the GMSC(a), but can also be in the language of the PSTN in the country containing PLMN(b).

IR24 General

8(46)

IR2461

2.1.6

PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Is Not Able To Respond To Paging or Pre-Paging (Battery off)
PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - No Response to Paging or Pre-Paging (Battery off)

Pre-Check:

Check if the HPLMN(a) and PLMN(b) support Pre-paging, and HPLMN(a) sets a Pre-paging supported parameter in MAP_SEND_ROUTING_INFORMATION and MAP_PROVIDE_ROAMING_NUMBER. (YES/NO) NO continue with A. YES continue with B MS1(a) is attached. Disable MS(a) so that it is unable to respond to paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible. Immediately attempt a call from PSTN telephone(b2) to MS1(a)

If: A) Paging Precondition: Action:

Expected Result: Successful result if PSTN telephone(b2) receives an announcement in the language of PLMN(b) that MS1(a) cannot be reached. Comments: This test case confirms that the correct response is given when a call is made to a roamed mobile that does not respond to paging. Note that there will be some delay before the failure announcement is given while the paging is performed. The announcement will be in the language of PLMN(b). Pre-Paging MS1(a) is attached. HPLMN(a) and PLMN(b) support Pre-paging, and HPLMN(a) sets a Pre-paging supported parameter in MAP_SEND_ROUTING_INFORMATION and MAP_PROVIDE_ROAMING_NUMBER. Disable MS(a) so that it is unable to respond to pre-paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible. Immediately attempt a call from PSTN telephone(b1) to MS1(a)

B) Precondition:

Action:

Expected Result: Successful result if PSTN telephone(b1) receives an announcement in the language of HPLMN(a) that MS1(a) cannot be reached. Comments: This test case confirms that the correct response is given when a call is made to a roamed mobile that does not respond to Pre-paging. Note that there will be some delay before the failure announcement is given while the Pre-paging is performed. The announcement will be in the language of HPLMN(a).

2.2

Supplementary Service Test Cases


Test cases 2.2.1 to 2.2.8 require that the MS(a) is able to manage its own Supplementary Service registration and activation status. The Call Forwarding test cases should be performed by using the "+" key. It should be noted that only those Supplementary services referenced in the "Preconditions" notes are to be active.

2.2.1
Preconditions: Action:

Barring Of All Outgoing Calls BAOC]


HLR entry contains "SS:BAOC:Active" [Set by MS] (i) MS(a) attempts Emergency Call [112 keyed on MS] (ii) MS(a) attempts call to PSTN.

Expected Result: Successful result if call "i" succeeds and call "ii" fails. (i) MS(a) attempts Emergency Call [112 keyed on MS] (ii) MS(a) attempts call to PSTN. Comment: This test case confirms the support of this Supplementary Service by the VPLMN (b). It also indicates that Emergency Services are available to visitors from HPLM(a).

2.2.2.
Preconditions: Action:

Barring Of Outgoing International Calls [BOIC]


HLR entry contains "SS:BOIC:Active". [Set by MS] (i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party] (ii) MS(a) attempts outgoing call to Home PLMN Country.

Expected Result: Successful result if call "i" succeeds and call "ii" fails. (i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party] (ii) MS(a) attempts outgoing call to Home PLMN Country. Comment: This test case confirms the support of this Supplementary Service by the VPLMN(b). It also indicates that General Operator Services are available to visitors from HPLMN(a), that any special routing operates successfully, and that any Calling Party information displayed to the operator is appropriately presented.

IR24 General

9(46)

IR2461

2.2.3
Pre-Check

Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]


Check if the VPLMN does support the SS:BOICexHC. (YES/NO) YES continue with A. NO continue with B.
Activated Service is BOICexHC (VPLMN supports SS: BOICexHC)

2.2.3.1

Preconditions: HLR entry contains "SS: BOIC ex HC: Active" [Set by MS] Action: (i) MS(a) attempts an outgoing call to Home-PSTN-telephone(a). (ii) MS(a) attempts a call to the country, where the MS is presently located by making use of the international number format. (iii) MS(a) attempts an international call to any other country than mentioned in (i) or (ii). (International Format should be +CC ...) Expected Result: Successful result if calls of test cases "i" and "ii" succeeds, and the call of test case "iii" fails.

2.2.3.2

Activated Service is BOICexHC (VPLMN does not support SS: BOICexHC):

Preconditions: HLR entry contains "SS: BOICexHC: Active" [Set by MS] Action: (i) MS(a) attempts a call to local PSTN. (ii) MS(a) attempts outgoing call to Home PLMN country. Expected Result: Successful result, if the call (i) succeeds and call (ii) fails.

Comment:

This test case confirm the support of this Supplementary Service by the VPLMN(b). In the case VPLMN(b) does not support the SS: BOICex HC then the switch makes a Functional fallback because it supports BOIC.

2.2.4
Pre-Check: If:

Barring Of All Incoming Calls (BAIC / BAICroaming)


Check if the VPLMN does support the SS: BAICroaming. (YES / NO) YES continue with A. NO continue with B. Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN. Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN. MS(a) in VPLMN (b) activates the SS: BAICroaming PSTN (b) calls MS(a)

A) Action:

Expected Result: Successful result, if calls fail B) Action: Preconditions: HLR no entry for Barring of all incoming calls. Preconditions: HLR no entry for Barring of all incoming calls. MS(a) in VPLMN (b) activates the SS: BAIC PSTN(b) calls MS(a) Expected Result: Successful result, if calls fail Comment: This test case confirms the support of the activation of this Supplementary Service when roaming inside VPLMN.

2.2.5

Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON)

Preconditions:

HLR entry for MS(a1) contains "SS : CFNRc: Active "Forwarded -to-address is PSTN telephone(b1). [Set by MS] In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be PSTN telephone(a). MS (a1) is attached. If used, MS(a2) is attached.

Action:

Disable MS(a1) so that it is unable to respond to paging [Note MS(a1) must not send IMSI Detach message, while being disabled. This can be achieved by removing the battery while the phone is switched on]. Immediately attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN telephone(b1), MS(a2) or PSTN telephone(a).

Expected Result: Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN(b2) may receive an announcement that the call is being forwarded. Comments: This test case confirms that CFNRc (before IMSI detach) operates correctly and implies that echo cancellers are correctly configured. Note the announcement could be in the language of PLMN(b), as the call was forwarded by the VMSC(b).

IR24 General

10(46)

IR2461

2.2.6
Preconditions:

Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE PHONE OFF)
HLR entry for MS(a1) contains "SS CFNRc: Active: Forwarded-to-address is PSTN telephone(b1)". [Set by MS] In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be PSTN telephone(a). MS (a1) is detached or deregistered in the VLR, but the VLR contains a record for MS(a1). If used, MS(a2) is attached.

Action:

Check that the subscriber MS(a1) is detached in the VLR, if possible. Attempt a call from PSTN telephone(b2) to MS(a1).

Answer

resultant call to PSTN(b1), MS(a2) or PSTN(a).

Expected Result: Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded. Comments: This test case confirms that CFNRc (after IMSI detach) operates correctly and implies that echo cancellers are correctly configured. The detached status of the subscriber should be checked in the VLR, because the switching-off procedure of a Mobile does not guarantee that the subscriber will be detached, because no acknowledgement message is sent from the VLR to the MS. Note the announcement will be in the language of PLMN (a) as the call was forwarded by GMSC(a).

2.2.7
Preconditions:

Call Forwarding on Busy (CFB)


HLR entry for MS (a1) contains SS: CFB: Active: Forwarded-to-address is PSTN telephone (b1). [Set by MS] In some PLMNs there are HLR restrictions on registering a forwarded-to-address which is outside the HPLMN country. There are also some PLMNs in which MSCs prevent the invocation of a call forward towards a distant country. In these cases the forwarded-to-address shall be MS(a2). If MS(a2) cannot be used, then the forwarded-to-address shall be PSTN telephone(a). MS (a1) is in conversation state. If used, MS(a2) is attached. Attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN(b1), MS(a2) or PSTN(a).

Action:

Expected Result: Successful result if indicate the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded. Comments: This test case confirms that CFB operates correctly.

2.2.8
Preconditions:

Call Forwarding on No Reply (CFNRY)


HLR entry for MS (a1) contains "SS: CFNRy: Active: Forwarded-to-address is PSTN telephone (b1). [Set by MS] MS(a1) is attached and idle. If used, MS(a2) is attached.

Action:

MS(a) initiates an Interrogate Call Forward Information. MS(a) displays information. Attempt a call from PSTN telephone(b2) to MS(a1). After a period of time during which MS(a1) "rings", call is diverted to PSTN(b1), MS(a2) or PSTN(a) where it is answered.

Expected Result: Successful result if MS(a) displays equivalent information to that stored in HLR and if MS(a1) "rings" for length of time equal to "No Reply Timeout" value stored in HLR, and call is completed to PSTN(b1), MS(a2) or PSTN(a), and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded. Comments: This test case confirms that CFNRy operates correctly. It also confirms that the procedure Interrogate Call Forward Information operates correctly.

2.3
2.3.1
Preconditions: Action:

SMS Test
Mobile ORIGINATED and Terminated Short Message Service (SMS-MO)
SMS-MO/MT is provisioned in HLR subscription. MS1(a) and MS2(a) are registered in VPLMN(b). Switch on MS1(a). Switch off MS2(a). Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS - Service Centre with Message Waiting priority selected. Switch on MS2(a) Await delivery of Short Message to MS2(a) Check contents of Short Message with those transmitted.

Expected Result: Successful result if Short Message is correctly delivered within [2] minutes of switching MS2(a) on. Comments: This test case confirms correct operation of SMS - Mobile Originated / Terminated Services including "Message Waiting" and "Note MS Present" procedures.

IR24 General

11(46)

IR2461

2.4
2.4.1
Preconditions:

SMS Interworking Test Cases


Information on the testing (SMS-IW)
Please find below some information about how to perform it. 1. For the whole SMS IW test you will have to switch the MS2 off and wait for at least 2 minutes after you sent the SMS before you switch the phone on again,

2. The several times you will have to report consist on the time you have a - sent the SMS b - switched the MS2 on (and not when UL is done) c - received the SMS on the MS2 3. Please do not forget to fill, sign and fax us the Appendix with all our required and selected test cases. (see 2nd sheet "IR24 Setup Info & COMPL. CERT.")

2.4.2.1

Details of the tests


In order to be able to proceed the test independently from the roaming partner, SMS IW test can be performed with one SIM cards of the PLMN (a) and one SIM card of the PLMN (b) both located on the PLMN (b). Therefore, SIM (a) of PLMN (a) has to be able to roam on PLMN (b), so PLMN (a) and (b) must have a roaming agreement. In the case of a roaming agreement as described above, the tests to be performed are the C.2.4.2.1 and C.2.4.2.2

2.4.2.1
2.4.2.1

SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
Mobile(a) in PLMN(b) to Mobile(b) in PLMN(b)

IR24 General

12(46)

IR2461

2.4.2.2
2.4.2.2

Details of the test C.2.4.2.2 (WITH ROAMING AGREEMENT)


Mobile(b) in PLMN(b) to Mobile(a) in PLMN(b)

2.4.3

Tests without roaming agreement


If PLMN (a) and (b) do not have roaming agreements, the tests described above can not be performed, therefore, tests for SMS IW has to be performed in coordination with the SMS IW partner. In the case of non roaming agreement, the tests to be performed are the C.2.4.3.1 and C.2.4.3.2.

2.4.3.1
2.4.3.1

Details of the test C.2.4.3.1 (NON ROAMING AGREEMENT)


Mobile (b) in PLMN (b) to Mobile (a) in PLMN (a)

IR24 General

13(46)

IR2461

IR24 General

14(46)

IR2461

2.4.3.2
2.4.3.2

Details of the test C.2.4.3.2 (NON ROAMING AGREEMENT)


Mobile (a) in PLM (a) to Mobile (b) in PLMN (b)

IR24 General

15(46)

IR2461

6
6.1

Test case selection and Completion Certificates


Test case selection and result overview
Roaming Scenario to be Tested
(H)PLMN (a) 2G / GSM 3G / UMTS 2G / GSM 3G / UMTS (V)PLMN YES / NO (b) 2G / GSM 2G / GSM 3G / UMTS 3G / UMTS

When you have selected the Test Cases you want performed please click here

In the following table the HPLMN should indicate the test cases that are requested to be performed by the roaming partner (VPLMN).

Test Case Selection

Requested Test-cases & Description

Results

IREG-comments from "IR24 TEST CASES", if any


n/a (see original entries in IR24 TEST CASES)

YES

2.1.1

Location Update by MS(a) in VPLMN(b)

YES

2.1.2

A) Location Cancellation for MS(a) Subscription held in VPLMN(b). B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)

YES

2.1.2

YES

2.1.3

MS1(a) Calls MS2(a), Both Roamed In VPLMN(b) PSTN Telephone In Country Containing PLMN(b) Calls MS1(a), Which Has Roamed To VPLMN(b), But The VLR Has Lost The Record For MS1(a). PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Has Performed IMSI Detach. PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Is Not Able To Respond To Paging or Pre-Paging (Battery off)

YES

2.1.4

YES

2.1.5

YES

2.1.6

YES

2.2.1

Barring Of All Outgoing Calls BAOC]

YES

2.2.2.

Barring Of Outgoing International Calls [BOIC] Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]

YES

2.2.3

YES

2.2.4

Barring Of All Incoming Calls (BAIC / BAICroaming) Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON) Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE PHONE OFF)

YES

2.2.5

YES

2.2.6

YES

2.2.7

Call Forwarding on Busy (CFB)

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

YES YES YES YES YES YES YES No No No No No No No No No No YES YES YES YES YES YES YES YES YES YES

2.2.8 2.3.1 2.4.1 2.4.2.1 2.4.2.2 2.4.3.1 2.4.3.2 19.1.1 19.2.1 19.3.1 19.4.1 19.5.1 19.6.1 19.7.1 19.8.1 19.9.1 19.10.1 20.1.1 20.2.1 20.3.1 20.4.1 20.5.1 20.6.1 20.7.1 20.8.1 20.9.1 20.10.1

Call Forwarding on No Reply (CFNRY) Mobile ORIGINATED and Terminated Short Message Service (SMS-MO) Information on the testing (SMS-IW) SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1 Details of the test C.2.4.2.2 (WITH ROAMING AGREEMENT) Details of the test C.2.4.3.1 (NON ROAMING AGREEMENT) Details of the test C.2.4.3.2 (NON ROAMING AGREEMENT) G S M A -SPEC. TEST CASE HEADER 19.1.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.2.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.3.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.4.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.5.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.6.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.7.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.8.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.9.1 (not in use now) G S M A -SPEC. TEST CASE HEADER 19.10.1 (not in use now) O P E R A T O R -SPEC. TEST CASE HEADER 20.1.1 O P E R A T O R -SPEC. TEST CASE HEADER 20.2.1 OPERATOR OPERATOR OPERATOR -SPEC. TEST CASE HEADER 20.3.1 -SPEC. TEST CASE HEADER 20.4.1 -SPEC. TEST CASE HEADER 20.5.1 n/a n/a (see original entries in IR24 TEST CASES)

O P E R A T O R -SPEC. TEST CASE HEADER 20.6.1 OPERATOR OPERATOR OPERATOR OPERATOR -SPEC. TEST CASE HEADER 20.7.1 -SPEC. TEST CASE HEADER 20.8.1 -SPEC. TEST CASE HEADER 20.9.1 -SPEC. TEST CASE HEADER 20.10.1

41

When you have selected the Test Cases you want performed please click here

IR24 Setup Info & COMPL. CERT.

16(44)

IR2461

want performed please click here

6.2

COMPLETION CERTIFICATE related to the in 6.1 required and selected test cases

This certificate confirms the successful completion of selected Tests in 6.1 for Mobile Subscribers of. HPLM
PLMN Network visited

HPLMN > field in TEST CASE PAGE entry H25 VPLMN > field in TEST CASE PAGE entry H26

Other comments

Toll Ticket file is being forwarded from PLMN via TADIG procedures. (Delete if not applicable) The tests were completed on. Date:

VPLMN > field in TEST CASE PAGE entry H26

to

HPLMN > field in TEST CASE PAGE entry H25

The testing team in HPLMN Name: HPLMN TESTER NAME (a) > field in TEST CASE PAGE H28 eMail: Tester@ HPLMN > field in TEST CASE PAGE H30 The testing team in VPLMN Name: TESTER NAME (b) > field in TEST CASE PAGE H31 eMail: Tester@ VPLMN > field in TEST CASE PAGE H33

Signed for HPLMN (a)

Date:

Signed for VPLMN (b)

Date:

End of Completion Certificate

IR24 Setup Info & COMPL. CERT.

17(44)

IR2461

IR24 General Page

Setup Page

Test Cases Page

Templates Page

TADIG Page

Instructions

IREG 24 Test Results for Mobile Stations of PLMN(a) Roaming to PLMN(b)


A.1.1 Roaming Scenario to be Tested
(H)PLMN(a) 2G / GSM 3G / UMTS 2G / GSM 3G / UMTS (V)PLMN(b) 2G / GSM 2G / GSM 3G / UMTS 3G / UMTS YES / NO 0 0 0 0

A.1.2

Network Operator Information all test numbers below, will be used for testing purposes and could be manual changed with different values within a later test, at each time during the test, if it is required.
MSISDN MS1 (a) IMSI MS1 (a) MSISDN MS2 (a) IMSI MS2 (a) MSISDN MS2 (b) IMSI MS2 (b) Directory Number (DN) of PSTN telephone (b1) (FORW. TO PARTY at CF-tests) Directory Number (DN) of PSTN telephone (b2) (regular CALLING PARTY) Home PSTN Country number (a)
MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 MSISDN MS2 (b) f.A1.2 I20 used for SMS-IW IMSI MS2 (b) f.A1.2 I21 used for SMS-IW PSTN (b1) from no. I22 used for CFx PSTN (b2) from no. I23 (regular A-Pty) HPLMN PSTN (a) from field I24

(H)PLMN (a) (V)PLMN (b) Date of Tests Testing personnel PLMN(a) Tel/Fax: email PLMN (a): Testing personnel PLMN(b) Tel/Fax: email PLMN (b): HLR Identity/Identities HLR Manufacturer(s) HLR Software Build Level(s) GMSC Identity/Identities GMSC Manufacturer(s) GMSC Software Build Level(s) VMSC Identity/Identities VMSC Manufacturer(s) VMSC Software Build Level(s) SMS-SC Identity / Identities SMS-SC Manufacturer(s) SMS-SC Software Build Level(s) Comments

HPLMN > field in TEST CASE PAGE entry H25 VPLMN > field in TEST CASE PAGE entry H26 HPLMN TESTER NAME (a) > field in TEST CASE PAGE H28 Tester@ HPLMN > field in TEST CASE PAGE H30 TESTER NAME (b) > field in TEST CASE PAGE H31 Tester@ VPLMN > field in TEST CASE PAGE H33

A.1.3

Toll Ticket Configuration


Call Toll Ticketing in use at VMSC? Supplementary Service activity Toll Ticketing in use at VMSC? Toll Ticketing in use at GMSC for Roaming call legs? Will VMSC Toll Ticket file be transferred to VPLMN Computing Centre? Will VMSC Toll Ticket file be transferred to the HPLMN from VPLMN? Method of transfer of Toll Ticket File to HPLMN [Via TADIG mechanism /other] Comments [Yes/No] [Yes/No] [Yes/No] [Yes/No] [Yes/No]

Notes: 1. If Toll Ticketing is not in use then the line items marked with an asterisk (*) may be omitted from these Test Result Sheets. 2. If Supplementary Service activity Toll Ticketing is not in use there is no need to write the time at the lines marked with a plus (+).

A 2.1

Basic Service Test Cases


The numbering of the test result sections within this appendix is identical to the associated Test case from section 2 of the main document.

A 2.1.1

Location Update by MS(a) in VPLMN(b)


action:
. . . . . . . . . . .

Power-up MS1(a) and perform location registration on VPLMN(b) Check VLR record for the IMSI/MSISDN of MS1.

expected result:
. . . . . .

Successful result if VLR record is identical to the pre-testing information supplied by PLMN(a). Unsuccessful result if any of the basic and supplementary services tested by this document or all of the information is missing.

VLR Record contents: MSISDN MS1 (a) IMSI MS1 (a) Teleservices SPEECH SMS MO SMS MT Fax Bearer Services Supplementary Services BAOC BOIC BOICexHC CFB CFNRy CFNRc CW CH MPTY AOCC AOCI Others HLR E164 Address Comments
MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 [Y/N] [Y/N] [Y/N] [Y/N]

[Y/N] [Y/N] [Y/N] [Y/N] [Y/N] [Y/N] C Number C Number C Number [Y/N] [Y/N] [Y/N] [Y/N] [Y/N]

MSISDN MS2 (a) IMSI MS2 (a) Teleservices SPEECH SMS MO SMS MT Fax Bearer Services Supplementary Services BAOC BOIC BOICexHC CFB CFNRy CFNRc CW CH MPTY AOCC AOCI Others HLR E164 Address Comments

MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 [Y/N] [Y/N] [Y/N] [Y/N]

[Y/N] [Y/N] [Y/N] [Y/N] [Y/N] [Y/N] C Number C Number C Number [Y/N] [Y/N] [Y/N] [Y/N] [Y/N]

IR24 Test Cases

18(44)

IR2461

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

19(44)

IR2461

A.2.1.2

Operator Control of Service


A) Location Cancellation for MS(a) Subscription held in VPLMN(b). action: Establish a MOC from MS(a). HPLMN(a) personnel deletes MS(a) subscription from HLR either using HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR. Check VLR for record of MS(a).
. . . . . . . . . . .

click Help forTime Macro

expected result:
. . . . . .

Successful result if VLR record for MS (a) has been erased and when the established MOC is cut.

VLR Record contents prior to cancellation MSISDN MS1(a/b) IMSI MS1 (a/b) VLR record erased? Time delay between HLR deleting subscription and VLR erasing record Comments
MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17

[Yes/No] Secs Secs

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

B) Operator Determined Barring (ODB) for All Outgoing Calls and All Incoming Calls when on Roaming of MS(a)
action:
. . . . . . . . . . .

HPLMN(a) personnel activates ODB for All Outgoing Calls and All Incoming Calls when on Roaming for MS(a) from HLR either using HLRs Man-Machine Interface or via Administrative Data Centre (ADC) input to HLR.
MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17

MSISDN of MS1 (a) IMSI MS1(a) Operator performed barring from HLR VLR record contains barring tags Perform a call from MS(a). Is it successful? Call MS(a). Is it successful? Comments

[Yes/No] [Yes/No] [Yes/No] [Yes/No]

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.1.3
click Help forTime Macro

MS1(a) Calls MS2(a), Both Roamed In VPLMN(b)


action:
. . . . . . . . . . .

MS1(a) establishes call to MS2(a). Call answered and held for one minute. Quality assessed. Successful result if call is established in 30 seconds, and call is stable in unanswered and answered phases, and there is no perceptible echo to either user, and call remains in intelligible/high quality conversation phase for one minute. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.

expected result:
. . . . . .

MSISDN of originating MS (i.e. MS1(a)) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17 Number keyed into MS1 (a) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2(a) IMSI MS2 (a) f.A1.2 I19 Time of start of call (i.e. SEND key operation) (hrs:mins:secs) Delay between SEND key operation at MS1(a) and MS2(a) alerting secs Time of perceived answer of call (hrs:mins:secs) (hrs:mins:secs) Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call. Duration must be 60sec or more.) secs Quality of call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which MS? [MS1(a) / MS2(a)] (i) Is the MSISDN of MS1(a) displayed at MS2(a) in proper format? [Yes/No] IF NO, what does MS2(a) display? (j) Comments

Info 0 1 1 2

Info Alert Time 3 0 0 0

Info 2

Info -3

0:00:00

0:00:00

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.1.4
. . . .

PSTN Telephone(b2) Calls MS1(a) (VLR has lost the record for MS1(a) )
action:
. . . . . . .

click Help forTime Macro

PSTN telephone(b2) calls MS1(a). If call is successfully established, then maintain answered call for one minute. Assess quality. If call attempt returns "System Failure" message, then make MS1(a) perform a location update, and repeat this test case. Successful result if either first call-attempt is established or "System Failure" message is returned within 30 seconds. In addition the answered call, whether establish on the first attempt or after the location update, has no perceptible echo to either user, and that an acceptable quality connection can be maintained. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. This test will also confirm the correct delivery of CLI information (or lack thereof) in a roaming scenario.
PSTN (b2) from no. I23 (regular A-Pty) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) 0:00:00

expected result:
. . . . . .

Directory Number (DN) of PSTN telephone (b2) Number of MS1(a) dialled by PSTN telephone (b2) IMSI MS1(a) Time of start of call (i.e. SEND key operation)

Info 0 1 1 2

Info Alert Time 3 0 0 0

Info 2

Info -3

Delay between dialing last digit of MSISDN of MS1(a) at PSTN telephone(b2) and MS1(a) alerting secs Time of perceived answer of call (hrs:mins:secs) (hrs:mins:secs) Time of end of call (hrs:mins:secs) Chargeable Call Duration (i.e. perceived answer until end of call. Duration must be 60sec or more.) secs Was first call successful? [Yes/No] Was location update sequence originated from the Mobile Station necessary ? [Yes/No] Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which party? [PSTN/MS1(a)] Is the Directory Number (DN) of Telephone(b) displayed at MS1(a) in proper format? [Yes/No] IF NO, what does MS1(a) display? Comments

0:00:00

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.1.5
click Help forTime Macro

PSTN Telephone(b2) Calls MS1(a) Roamed To Country(b) - IMSI Detached (Power off)
action:
. . . . . . . . . . .

Check that the subscriber is detached in the VLR, if possible. Attempt a call from PSTN telephone(b2) to MS1(a)

expected result:
. . . . . .

Successful result if PSTN telephone(b2) receives an announcement that MS1(a) cannot be reached or is unavailable.

Directory Number (DN) of PSTN telephone (b2) Number of MS1(a) dialled by PSTN telephone (b2) IMSI MS1(a) Time of start of call (i.e. last digit dialled) Time of start of "not reachable" announcement Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) Language of announcement Text of announcement Comments

PSTN (b2) from no. I23 (regular A-Pty) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) secs 0:00:00

Info 1 1 2

Info 0 0 0

Testcase Result

[PASS / FAIL / NOT PERFORMED]

IR24 Test Cases

20(44)

IR2461

Signature of Tester

TESTER NAME (b) > field in TEST CASE PAGE H31

Date

IR24 Test Cases

21(44)

IR2461

A 2.1.6
click Help forTime Macro

PSTN Telephone In Country Containing PLMN(b) Calls MS(a), Which Has Roamed To VPLMN(b), But Is Not Able To Respond To Paging or Pre-Paging (Battery off)
action:
. . . . . . . . . . .

Disable MS(a) so that it is unable to respond to paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible. Immediately attempt a call from PSTN telephone(b2) to MS1(a) Successful result if PSTN telephone(b2) receives an announcement in the language of PLMN(b) that MS1(a) cannot be reached.

Disable MS(a) so that it is unable to respond to pre-paging [Note MS(a) must not send IMSI Detach message, while being disabled]. Check that the subscriber is attached in the VLR, if possible. Immediately attempt a call from PSTN telephone(b1) to MS1(a) Successful result if PSTN telephone(b1) receives an announcement in the language of HPLMN(a) that MS1(a) cannot be reached.
[Yes/No] [Yes/No] PSTN (b2) from no. I23 (regular A-Pty) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) secs 0:00:00

expected result:
. . . . . .

Does HPLMN(a) and PLMN(b) support Pre-Paging? Does HPLMN(a) sets a Pre-paging supported parameter in MAP_SEND_ROUTING_INFORMATION and MAP_PROVIDE_ROAMING_NUMBER? Which test case was executed? [A (Paging) / B (Pre-paging)] Directory Number of calling PSTN telephone(b2) Number dialled by PSTN telephone(b2) e.g. MS1(a) IMSI MS1(a) Time of start of call (i.e. last digit dialled) Time of start of "not reachable" announcement Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) Language of announcement Text of announcement Comments

Info 1 1 2

Info 0 0 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.2
A 2.2.1
click Help forTime Macro

Supplementary Service Test Cases


Barring Of All Outgoing Calls BAOC]
action:
. . . . . . . . . . .

(i) MS(a) attempts Emergency Call [112 keyed on MS] (ii) MS(a) attempts call to PSTN.

expected result:
. . . . . .

Successful result if call "i" succeeds and call "ii" fails. (i) MS(a) attempts Emergency Call [112 keyed on MS] (ii) MS(a) attempts call to PSTN.
MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) ? EMC (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) Info 1 1 1 2 2 Info 0 0 0 0 0

MSISDN MS1(a) IMSI MS1(a) Time of activation of BAOC Emergency code keyed [i.e.112] Time of start of emergency call (i.e. SEND key operation) Time of perceived answer of call Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) Emergency Call successful? PSTN (b) number keyed (enter number in international format) PSTN (b) call successful? Time of deactivation of BAOC Comments

secs 0:00:00 [Yes/No] PSTN (b2) from no. I23 (regular A-Pty) [Yes/No] (hrs:mins:secs)

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.2.2
click Help forTime Macro

Barring Of Outgoing International Calls [BOIC]


action:
. . . . . . . . . . .

(i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party] (ii) MS(a) attempts outgoing call to Home PLMN Country.

expected result:
. . . . . .

Successful result if call "i" succeeds and call "ii" fails. (i) MS(a) attempts call to PLMN(b) or PSTN(b) General Operator Service [The call should be made to an Operator Position, which uses a signaling system to obtain the identity of the Calling Party] (ii) MS(a) attempts outgoing call to Home PLMN Country.
MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 Info (hrs:mins:secs) PSTN (b2) from no. I23 (regular A-Pty) (hrs:mins:secs) secs 0:00:00 (hrs:mins:secs) (hrs:mins:secs) secs 0:00:00 [Yes/No] HPLMN PSTN (a) from field I24 [Yes/No] (hrs:mins:secs) Info 2 0 1 1 2 0 Alert Time 3 0 0 0 2 -3 Info Info

MSISDN MS1(a) IMSI MS1(a) Time of activation of BAIC Operator Service number or PSTN (b) number keyed Time of start of national PSTN call (i.e. SEND key operation) Delay between SEND key operation and MS(a) receiving alerting indication Time of perceived answer of call Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) Call routed to correct Operator position? Home PLMN Country number keyed (enter number in international format +CC) Home PLMN Country call successful? Time of deactivation of BOIC Comments

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.2.3
click Help forTime Macro

Barring Of Outgoing International Calls except To Home PLMN Country [BOICexHC]


action:
. . . . . . . . . . .

Check if the VPLMN does support the SS:BOICexHC. (YES/NO)

expected result:
. . . . . .

see below

General Method of Supplementary Service Configuration Does the switch support the SS: BOICexHC? MSISDN MS1(a) IMSI MS1(a) Split into different cases if VPLMN(b) (i.e.) 2.2.3.1) supports the SS:BOICexHC. or (i.e.) 2.2.3.2) does not support the SS:BOICexHC. The test case result box is only entered once !

[MS User/HLR operator] [Yes/No]


MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17

IR24 Test Cases

22(44)

IR2461

A.2.2.3.1

Activated Service is BOICexHC (VPLMN supports SS: BOICexHC) action: (i) MS(a) attempts an outgoing call to Home-PSTN-telephone(a).
. . . . . . . . . . .

click Help forTime Macro

(ii) MS(a) attempts a call to the country, where the MS is presently located by making use of the international number format. (iii) MS(a) attempts an international call to any other country than mentioned in (i) or (ii). (International Format should be +CC ...)

expected result:
. . . . . .

Successful result if calls of test cases "i" and "ii" succeeds, and the call of test case "iii" fails.
Info Info 3 HPLMN PSTN (a) from field I24 (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs)

Time of activation of BOICexHC A.1) (i) Call to Home-PSTN-telephone(a): Home PSTN (a) Country number keyed Time of start of Home PSTN Country call (i.e. SEND key operation) Time of perceived answer of call Time of end of call Home PSTN Country call Chargeable Call Duration (i.e. perceived answer until end of call) A.2) (ii) Call to country where the MS is presently located: PSTN (b2) number of the country keyed, where MS(a) is presently located Time of start of call within the country where the MS(a) is presently located (i.e. SEND key operation) Time of perceived answer of call Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) A.3) (iii) International Call, not to Home PLMN country and not to country where the MS is presently located:

1 1 5 0:00:00

0 0 0

secs

PSTN (b2) from no. I23 (regular A-Pty) (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) secs 0:00:00

1 1 5

0 0 0

International (Non Home PLMN Country and non country where MS(a) is presently located) call successful? Time of deactivation of BOICexHC

[Yes/No]
8 0

A.2.2.3.2

Activated Service is BOICexHC (VPLMN does not support SS: BOICexHC): action: (i) MS(a) attempts a call to local PSTN.
. . . . . . . . . . .

click Help forTime Macro

(ii) MS(a) attempts outgoing call to Home PLMN country.

expected result:
. . . . . .

Successful result, if the call (i) succeeds and call (ii) fails.

Time of activation of BOICexHC B.1) (i) Call to country where the MS is presently located: PSTN (b) number of the country keyed, where MS(a) is presently located Time of start of national PSTN call (i.e. SEND key operation) Time of perceived answer of call Time of end of call PSTN Chargeable Call Duration (i.e. perceived answer until end of call) B.2) (ii) Call to Home-PSTN-telephone(a): Home PSTN (a) Country number keyed Home PSTN Country call successful? Time of deactivation of BOICexHC Results of this test case and comments: Comments

3 PSTN (b2) from no. I23 (regular A-Pty) (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs)

1 1 5

0 0 0

1900/01/00 11:24:50 1900/01/00 11:24:55

secs

0:00:00

HPLMN PSTN (a) from field I24

[Yes/No]
3 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.2.4
click Help forTime Macro

Barring Of All Incoming Calls (BAIC / BAICroaming)


action:
. . . . . . . . . . .

Preconditions: HLR no entry for Barring of all incoming calls when roaming in VPLMN. MS(a) in VPLMN (b) activates the SS: BAICroaming PSTN (b) calls MS(a) Successful result, if calls fail

Preconditions: HLR no entry for Barring of all incoming calls. MS(a) in VPLMN (b) activates the SS: BAIC PSTN(b) calls MS(a)

expected result:
. . . . . .

Successful result, if calls fail

MSISDN MS1(a) IMSI MS1(a) Time of activation of [BAIC / BAICroaming] PSTN (b) number to call Number keyed by PSTN Call successful? Time of deactivation of [BAIC/BAICroaming] Comments

MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) PSTN (b2) from no. I23 (regular A-Pty) MSISDN MS1 (a) f.A1.2 I16 [Yes/No] (hrs:mins:secs)

Info 3

Info 0

Info

Info

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

Call Forwarding on Not Reachable (CFNRC -Before IMSI Detach TAKE BATTERY OFF WHILE PHONE IS SWITCHED ON) A 2.2.5
action:
. . . .

click Help forTime Macro

. . . . . . .

Disable MS(a1) so that it is unable to respond to paging [Note MS(a1) must not send IMSI Detach message, while being disabled. This can be achieved by removing the battery while the phone is switched on]. Immediately attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN telephone(b1), MS(a2) or PSTN telephone(a). Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN(b2) may receive an announcement that the call is being forwarded.

expected result:
. . . . . .

MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17 Time of activation of CFNRc (hrs:mins:secs) Directory Number (i.e. DN) of calling PSTN telephone(b2) PSTN (b2) from no. I23 (regular A-Pty) DN of forwarded - to - PSTN telephone(b1). Note 1 PSTN (b1) from no. I22 used for CFx Time of start of call (hrs:mins:secs) Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing Note sec 1 0:00:00 Time of perceived answer of call (hrs:mins:secs) Time of end of call (hrs:mins:secs) Chargeable Call Duration (i.e. perceived answer until end of call) sec 0:00:00 Was an announcement that call was - being - forwarded received by PSTN telephone(b2)? [Yes/No] Language of announcement [If applicable] Text of announcement [If applicable] Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which party? [caller/called] Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a). Comments

Info 3

Info 0 Alert Time 0 1 1 2 3 0 0 0

Info

Info

-3

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

23(44)

IR2461

A 2.2.6
click Help forTime Macro

Call Forwarding on Not Reachable (CFNRC -After IMSI Detach SWITCH THE PHONE OFF)
action:
. . . . . . . . . . .

Check that the subscriber MS(a1) is detached in the VLR, if possible. Attempt a call from PSTN telephone(b2) to MS(a1).

expected result:
. . . . . .

Successful result if the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.

MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17 Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty) Directory Number (DN) of PSTN telephone (b1) Note 1 PSTN (b1) from no. I22 used for CFx Time of start of call (hrs:mins:secs) Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. sec Note 1 0:00:00 Time of perceived answer of call (hrs:mins:secs) Time of end of call (hrs:mins:secs) sec Chargeable Call Duration (i.e. perceived answer until end of call) 0:00:00 Was an announcement that call was - being - forwarded received by PSTN telephone(b2)? [Yes/No] Language of announcement [If applicable] Text of announcement [If applicable] Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which party? [caller/called] Time of deactivation of CFNRc (hrs:mins:secs) Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a). Comments

Info

Info Alert Time 0 1 1 2 3 0 0 0

Info

Info

-3

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.2.7
click Help forTime Macro

Call Forwarding on Busy (CFB)


action:
. . . . . . . . . . .

MS (a1) is in conversation state. If used, MS(a2) is attached. Attempt a call from PSTN telephone(b2) to MS(a1). Answer resultant call to PSTN(b1), MS(a2) or PSTN(a). Successful result if indicate the call is completed to PSTN(b1), MS(a2) or PSTN(a) and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.
Info 3 Info 0 Info Info

expected result:
. . . . . .

MSISDN MS1(a) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1(a) IMSI MS1 (a) f.A1.2 I17 Time of activation of CFB (hrs:mins:secs) Directory Number (DN) of PSTN telephone (b2) PSTN (b2) from no. I23 (regular A-Pty) Directory Number (DN) of PSTN telephone (b1) Note 1 PSTN (b1) from no. I22 used for CFx Party with which MS(a1) is in conversation [DN] to be filled by VPLMN IMSI MS2 (a) f.A1.2 I19 IMSI MS2(a) Time of start of call (hrs:mins:secs) Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. Sec Note 1 0:00:00 Time of perceived answer of call (hrs:mins:secs) (hrs:mins:secs) Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) sec 0:00:00 Was an announcement that call was - being - forwarded received by PSTN telephone(b2)? [Yes/No] Language of announcement [If applicable] Text of announcement [If applicable] Quality of successful call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which party? [caller/called] Time of deactivation of CFB (hrs:mins:secs) Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a). Comments

Alert Time 0 1 1 2 3 0 0 0 2 -3

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

A 2.2.8
click Help forTime Macro

Call Forwarding on No Reply (CFNRY)


action:
. . . . . . . . . . .

MS(a) initiates an Interrogate Call Forward Information. MS(a) displays information. Attempt a call from PSTN telephone(b2) to MS(a1). After a period of time during which MS(a1) "rings", call is diverted to PSTN(b1), MS(a2) or PSTN(a) where it is answered.

expected result:
. . . . . .

Successful result if MS(a) displays equivalent information to that stored in HLR and if MS(a1) "rings" for length of time equal to "No Reply Timeout" value stored in HLR, and call is completed to PSTN(b1), MS(a2) or PSTN(a), and the call quality is acceptable. See CCITT Rec P.84 Annex D for instructions on use of Quality Scales. Optionally, PSTN telephone(b2) may receive an announcement that the call is being forwarded.

MSISDN MS1(a) IMSI MS1(a) Time of activation of CFNRY Interrogate Supplementary Service at MS(a) by pressing *#61# Start Time of SS activity (i.e. SEND key operation) Delay between SEND key operation and receipt of Display information Information displayed on MS(a)? Does MS(a) displays correct status of the call forwarding service? Directory Number (DN) of PSTN telephone (b2) Directory Number (DN) of PSTN telephone (b1) Note 1 Time of start of call
Delay between dialing last digit of MSISDN of MS(a1) at PSTN telephone(b2) and PSTN telephone(b1) ringing. Note 1

MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) (hrs:mins:secs) sec

Info 2

Info

Info

Info

Display Receipt Time 0:00:00 0 1 3 0 2 -3

Time of perceived answer of call Time of end of call Chargeable Call Duration (i.e. perceived answer until end of call) Was an announcement that call was - being - forwarded received by PSTN telephone(b2)? Language of announcement [If applicable] Text of announcement [If applicable] Quality of successful call Echo present? If Yes, to which party? Time of deactivation of CFNRY

[Yes/No] PSTN (b2) from no. I23 (regular A-Pty) PSTN (b1) from no. I22 used for CFx (hrs:mins:secs) sec 0:00:00 (hrs:mins:secs) (hrs:mins:secs) sec 0:00:00 [Yes/No]

Alert Time 0 1 1 2 3 0 0 0 2 -3

[Excellent, Good, Fair, Poor, Bad] [Yes/No] [caller/called] (hrs:mins:secs)

Note 1. If forwarding to PSTN telephone (b1) is restricted by HPLMN or VPLMN, then use MS(a2). If MS(a2) cannot be used then choose PSTN telephone(a). Comments

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

24(44)

IR2461

A 2.3
A 2.3.1
click Help forTime Macro
. . . . . . . . . . .

SMS Test Cases


Mobile ORIGINATED and Terminated Short Message Service (SMS-MO)
action:
Switch on MS1(a). Switch off MS2(a). Use MS1(a) to transmit a 160 character Short Message to MS2(a) via the Home Country SMS - Service Centre with Message Waiting priority selected. Switch on MS2(a)

expected result:
. . . . . .

Successful result if Short Message is correctly delivered within [2] minutes of switching MS2(a) on.

MSISDN MS1(a) IMSI MS1(a) E164 address of HPLMN SMS Service Centre Time of transmitting to SMS - Service Centre MSISDN MS2(a) IMSI MS2(a) Time of switching on MS2(a) Time of receipt of SMS at MS2(a) Was message correctly received? If the message was not received, repeat test with MS2(a) switched on. Was message correctly received this time? Comments

MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 (hrs:mins:secs) (hrs:mins:secs) [Yes/No] [Yes/No]

Info

Info

1 1

0 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

2.4

SMS Interworking Test Cases


This appendix gives a template and a description of the different cases for SMS IW tests.

2.4.1

Basic Test Results


The numbering of the test result sections within this appendix is identical to the associated Test case from section 2 of the main document.

2.4.1

Location Update by MS(a) in PLMN(b)


VLR Record contents:

click Help forTime Macro

MSISDN IMSI Teleservices Speech [Y=Yes/N=No] SMS MO SMS MT Fax Bearer Services: (DCDA300 - 4800) Supplementary Services BAOC BOIC BOICexHC CFB CFNRy CFNRc CW CH MPTY AOCC AOCI Others: ( CFU, CLIP-N, CLIR-TR, HOLD ) HLR E164 Address Comments

e.g. MS1(a)

MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17

[Y/N] [Y/N] [Y/N]

[Y/N] [Y/N] [Y/N] [Y/N] [Y/N] [Y/N] C Number C Number C Number [Y/N] [Y/N] [Y/N] [Y/N] [Y/N]

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

2.4.2 2.4.2.1

SMS Test Results in case (WITH ROAMING AGREEMENT), Details of the test C.2.4.2.1
Mobile(a) in PLMN(b) to Mobile(b) in PLMN(b)
action:
. . . . .

no test setup- see pictures in General, no link

click Help forTime Macro

. . . . . .

expected result:
. . . . . .

no result, no link

MSISDN -MS1 (a) IMSI - MS1 (a) E164 address of HPLMN SMS Service Centre Time of initial transmitting by Service Centre MSISDN -MS2 (b) IMSI - MS2 (b) Time of switching on MS2(b) Time of receipt of SMS at MS2(b) Was message correctly received? If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time? Comments

MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) MSISDN MS2 (b) f.A1.2 I20 used for SMS-IW IMSI MS2 (b) f.A1.2 I21 used for SMS-IW (hrs:mins:secs) (hrs:mins:secs) [Yes/No] [Yes/No]

Info 3

Info 0

1 1

0 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

2.4.2.2
click Help forTime Macro

Mobile(b) in PLMN(b) to Mobile(a) in PLMN(b)


action:
. . . . . . . . . . .

no test setup- see pictures in General, no link

expected result:
. . . . . .

no result, no link

MSISDN -MS2 (b) IMSI - MS2 (b) E164 address of VPLMN SMS Service Centre Time of initial transmitting by Service Centre MSISDN -MS1 (a) IMSI - MS1 (a) Time of switching on MS1 (a) Time of receipt of SMS at MS1 (a) Was message correctly received? If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time? Comments

MSISDN MS2 (b) f.A1.2 I20 used for SMS-IW IMSI MS2 (b) f.A1.2 I21 used for SMS-IW (hrs:mins:secs) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) (hrs:mins:secs) [Yes/No] [Yes/No]

Info 3

Info 0

1 1

0 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

25(44)

IR2461

2.4.3 2.4.3.1
click Help forTime Macro

Test Results in case of NO ROAMING AGREEMENT


Mobile (b) in PLMN (b) to Mobile (a) in PLMN (a)
action:
. . . . . . . . . . .

no test setup- see pictures in General, no link

expected result:
. . . . . .

MSISDN -MS2 (b) IMSI - MS2 (b) E164 address of VPLMN SMS Service Centre Time of initial transmitting by Service Centre MSISDN -MS1 (a) IMSI - MS1 (a) Time of switching on MS1 (a) Time of receipt of SMS at MS1 (a) Was message correctly received? If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time? Comments

MSISDN MS2 (b) f.A1.2 I20 used for SMS-IW IMSI MS2 (b) f.A1.2 I21 used for SMS-IW (hrs:mins:secs) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 (hrs:mins:secs) (hrs:mins:secs) [Yes/No] [Yes/No]

Info 3

Info 0

1 1

0 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

2.4.3.2
click Help forTime Macro

Mobile (a) in PLM (a) to Mobile (b) in PLMN (b)


action:
. . . . . . . . . . .

no test setup- see pictures in General, no link

expected result:
. . . . . .

MSISDN -MS2 (a) IMSI - MS2 (a) E164 address of HPLMN SMS Service Centre Time of initial transmitting by Service Centre MSISDN -MS1 (b) IMSI - MS1 (b) Time of switching on MS1 (b) Time of receipt of SMS at MS1 (b) Was message correctly received? If the message was not received, repeat test with MS2(b) switched on. Was message correctly received this time? Comments

MSISDN MS2 (a) f.A1.2 I18 IMSI MS2 (a) f.A1.2 I19 (hrs:mins:secs)

Info 3

Info 0

(hrs:mins:secs) (hrs:mins:secs) [Yes/No] [Yes/No]

1 1

0 0

Testcase Result Signature of Tester

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

26(44)

IR2461

IR24 Test Cases

27(44)

IR2461

IR24 Test Cases

28(44)

IR2461

IR24 Test Cases

29(44)

IR2461

20.1

O P E R A TO R Specific Tests
O P E R A T O R -SPEC. TEST CASE HEADER 20.1.1
action:
. . . . . .

20.1.1

Detail Text 2 / Action- field in General TC 20.1.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.1.1

Click here to paste a Template page into this Test Case.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

Click here to Clear Pastecontents.

20.2.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.2.1


action:
. . . . . . .

Detail Text 2 / Action- field in General TC 20.2.1

click Help forTime Macro

. . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.2.1

Click here to paste a Template page into this Test Case. Click here to Clear Pastecontents.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

30(44)

IR2461

IR24 Test Cases

31(44)

IR2461

20.3.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.3.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.3.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.3.1

Click here to paste a Template page into this Test Case. Click here to Clear Pastecontents.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

20.4.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.4.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.4.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.4.1

Click here to paste a Template page into this Test Case. Click here to Clear Pastecontents.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

32(44)

IR2461

20.5.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.5.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.5.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.5.1

Click here to paste a Template page into this Test Case. Click here to Clear Pastecontents.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

20.6.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.6.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.6.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.6.1

Click here to paste a Template page into this Test Case. Click here to Clear Pastecontents.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

IR24 Test Cases

33(44)

IR2461

IR24 Test Cases

34(44)

IR2461

20.7.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.7.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.7.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.7.1

Click here to paste a Template page into this Test Case. Click here to Clear Pastecontents.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

20.8.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.8.1


action:
. . . . .

Detail Text 2 / Action- field in General TC 20.8.1

click Help forTime Macro

. . . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.8.1

Click here to paste a Template page into this Test Case.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

Click here to Clear Pastecontents.

IR24 Test Cases

35(44)

IR2461

20.9.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.9.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.9.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.9.1

Click here to paste a Template page into this Test Case.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

Click here to Clear Pastecontents.

20.10.1

O P E R A T O R -SPEC. TEST CASE HEADER 20.10.1


action:
. . . . . .

Detail Text 2 / Action- field in General TC 20.10.1

click Help forTime Macro

. . . . .

expected result:
. . . . . .

Detail Text 3 (Result) 20.10.1

Click here to paste a Template page into this Test Case.

Test Case Comments

Testcase Result Signature of Tester Paste Test Case Below

[PASS / FAIL / NOT PERFORMED]


TESTER NAME (b) > field in TEST CASE PAGE H31 Date

Click here to Clear Pastecontents.

End of Document

IR24 Test Cases

36(44)

IR2461

MS1 and MS2 template


Return to IR24 Test Case Page Restore Test Case Click to select this Operator Specific Test
MSISDN of originating MS (i.e. MS1(a/b)) VPLMN input required IMSI of MS1, if from HPLMN (a) VPLMN input required Number keyed into MS1(a) VPLMN input required MSISDN of originating MS (i.e. MS2(a/b)) VPLMN input required IMSI of MS2, if from HPLMN (a) VPLMN input required Number keyed into MS2(a) VPLMN input required SMSC Addr. For MSISDN MS1(a/b)) VPLMN input required SMSC Addr. For MSISDN MS2(a/b)) VPLMN input required (hrs:mins:secs) Time of start of call MS1 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS2(a/b) alerting secs MS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID) MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID) (hrs:mins:secs) Time of start of call MS2 (a/b) (i.e. SEND key operation) Time of perceived answer of call at MS1 (a/b) (hrs:mins:secs) Time of perceived answer of call at MS2 (a/b) (hrs:mins:secs) MS1 (a/b) Status request for various issue / time END (hrs:mins:secs) MS2 (a/b) Status request for various issue / time END (hrs:mins:secs) secs Chargeable Call Duration at MS1(a/b) = xxx sec or more secs Chargeable Call Duration at MS2(a/b) = xxx sec or more MS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID) MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID) Quality of call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)] Is the MSISDN of MS1(a) displayed at MS2(a) in proper format? [Yes/No] IF NO, what does MS2(a) display?

Info 0 1

Info Alert Time 3 0

Info 2

Info -3

0:00:00

1 1 1 1 3 0:00:00 0:00:00

0 0 0 0 0

MS1 and MS3 template


Return to IR24 Test Case Page Restore Test Case Click to select this Operator Specific Test

MSISDN of originating MS (i.e. MS1(a/b)) VPLMN input required IMSI of MS1, if from HPLMN (a) VPLMN input required Number keyed into MS1(a) VPLMN input required MSISDN of originating MS (i.e. MS3(a/b)) VPLMN input required IMSI of MS2, if from HPLMN (a) VPLMN input required Number keyed into MS2(a) VPLMN input required SMSC Addr. For MSISDN MS1(a/b)) VPLMN input required SMSC Addr. For MSISDN MS3(a/b)) VPLMN input required (hrs:mins:secs) Time of start of call MS1 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS3(a/b) alerting secs MS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID) MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID) Time of start of call MS2 (a/b) (i.e. SEND key operation) (hrs:mins:secs) Time of perceived answer of call at MS1 (a/b) (hrs:mins:secs) Time of perceived answer of call at MS3 (a/b) (hrs:mins:secs) MS1 (a/b) Status request for various issue / time END (hrs:mins:secs) MS3 (a/b) Status request for various issue / time END (hrs:mins:secs) secs Chargeable Call Duration at MS1(a/b) = xxx sec or more secs Chargeable Call Duration at MS3(a/b) = xxx sec or more MS1 (a/b) Status request for various issue (e.g. balance in case of PREPAID) MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID) Quality of call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)] Is the MSISDN of MS1(a) displayed at MS3(a) in proper format? [Yes/No] IF NO, what does MS3(a) display?

Info 0 1

Info Alert Time 3 0

Info 2

Info -3

0:00:00

1 1 1 1 3 0:00:00 0:00:00

0 0 0 0 0

MS1, MS2 and MS3 template


Return to IR24 Test Case Page Restore Test Case Click to select this Operator Specific Test
VPLMN input required VPLMN input required VPLMN input required VPLMN input required VPLMN input required VPLMN input required (hrs:mins:secs)

MSISDN of originating MS (i.e. MS2(a/b)) IMSI of MS2, if from HPLMN (a) Number keyed into MS2(a) SMSC Addr. For MSISDN MS1(a/b)) SMSC Addr. For MSISDN MS2(a/b)) SMSC Addr. For MSISDN MS3(a/b)) Time of start of call MS1 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS2(a/b) alerting MS1 (a/b) Status request for varius issue (e.g. balance in case of PREPAID) MS2 (a/b) Status request for varius issue (e.g. balance in case of PREPAID) MS3 (a/b) Status request for varius issue (e.g. balance in case of PREPAID) Time of start of call MS2 (a/b) (i.e. SEND key operation) Time of perceived answer of call at MS1 (a/b) Time of perceived answer of call at MS2 (a/b) Time of perceived answer of call at MS3 (a/b) Time of start of call MS3 (a/b) (i.e. SEND key operation) MS1 (a/b) Status request for varius issue / time END MS2 (a/b) Status request for varius issue / time END MS3 (a/b) Status request for varius issue / time END Chargeable Call Duration at MS1(a/b) = xxx sec or more Chargeable Call Duration at MS2(a/b) = xxx sec or more Chargeable Call Duration at MS3(a/b) = xxx sec or more

Info 0 0:00:00

Info Alert Time 3

Info 2

Info -3

secs

(hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs)

(hrs:mins:secs) (hrs:mins:secs) (hrs:mins:secs) secs secs secs

1 1 1 1 1 1 1 4 0:00:00 0:00:00 0:00:00

0 0 0 0 0 0 0 0

MS1 (a/b) Status request for varius issue (e.g. balance in case of PREPAID) MS2 (a/b) Status request for varius issue (e.g. balance in case of PREPAID) MS3 (a/b) Status request for varius issue (e.g. balance in case of PREPAID) Quality of call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)] Is the MSISDN of MS1(a) displayed at MS2(a) in proper format? [Yes/No] IF NO, what does MS2(a) display?

MS2 and MS3 template


Return to IR24 Test Case Page Restore Test Case Click to select this Operator Specific Test

MSISDN of originating MS (i.e. MS2(a/b)) VPLMN input required IMSI of MS1, if from HPLMN (a) VPLMN input required Number keyed into MS1(a) VPLMN input required MSISDN of originating MS (i.e. MS3(a/b)) VPLMN input required IMSI of MS2, if from HPLMN (a) VPLMN input required Number keyed into MS2(a) VPLMN input required SMSC Addr. For MSISDN MS2(a/b)) VPLMN input required SMSC Addr. For MSISDN MS3(a/b)) VPLMN input required (hrs:mins:secs) Time of start of call MS2 (a/b) (i.e. SEND key operation) Delay between SEND key operation at MS1(a/b) and MS3(a/b) alerting secs MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID) MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID) Time of start of call MS2 (a/b) (i.e. SEND key operation) (hrs:mins:secs) Time of perceived answer of call at MS2 (a/b) (hrs:mins:secs) Time of perceived answer of call at MS3 (a/b) (hrs:mins:secs) MS2 (a/b) Status request for various issue / time END (hrs:mins:secs) MS3 (a/b) Status request for various issue / time END (hrs:mins:secs) secs Chargeable Call Duration at MS2(a/b) = xxx sec or more secs Chargeable Call Duration at MS3(a/b) = xxx sec or more MS2 (a/b) Status request for various issue (e.g. balance in case of PREPAID) MS3 (a/b) Status request for various issue (e.g. balance in case of PREPAID) Quality of call [Excellent, Good, Fair, Poor, Bad] Echo present? [Yes/No] If Yes, to which MS (a/b)? [MS1(a/b) / MS2(a/b) / MS3(a/b)] Is the MSISDN of MS2(a) displayed at MS3(a) in proper format? [Yes/No] IF NO, what does MS3(a) display?

Alert Time 0:00:00 0 1 3 0 2 -3

1 1 1 1 3 0:00:00 0:00:00

0 0 0 0 0

IR24 General Page

Setup Page

Test Cases Page

Templates Page

Tadig Page

Instructions
YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES

The intention of this worksheet is to allow easy download of the IREG test results for TADIG testers. To this extent this page only provides results for tests where a CDR can be created in TAP. Whether or not that CDR is then created may also depend on the charging principles or network setup of the visited network. For more information on the expected outcome on TAP please refer to GSM PRD TD.43 -- IR.24 - please refer to GSM PRD TD.43 Subscriber ID Other (IMSI!) MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 MSISDN MS1 (a) f.A1.2 I16 IMSI MS1 (a) f.A1.2 I17 MSISDN MSISDN MS1 (a) f.A1.2 I16 MSISDN MS2 (a) f.A1.2 I18 IMSI MS1 (a) f.A1.2 I17 IMSI MS2 (a) f.A1.2 I19

Create CSV file

IREG Test Ref 2.1.1 2.1.2A 2.1.2B 2.1.3 2.1.3

Event Number 1 1 1 1 2

TAP CDR Type None Expected None Expected None Expected MOC MTC

Service Type

Startime of CDR none none none 1900/01/00 1900/01/00 00:00:00 00:00:00

Chargeble DURATION none none 0:00:00 0:00:00

Voice Voice

Calling/Calle APN d Party none none none none none MSISDN MS2 (a) f.A1.2 I18 none MSISDN MS1 (a) f.A1.2 I16 none PSTN (b2) from no. I23 (regular A-Pty) MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 ? EMC PSTN (b2) from no. I23 (regular A-Pty) none HPLMN PSTN (a) from field I24 PSTN (b2) from no. I23 (regular A-Pty) none none none PSTN (b2) from no. I23 (regular A-Pty) none none none none PSTN (b2) from no. I23 (regular A-Pty) PSTN (b1) from no. I22 used for CFx MSISDN MS1 (a) f.A1.2 I16 none to be filled by VPLMN MSISDN MS1 (a) f.A1.2 I16 PSTN (b1) from no. I22 used for CFx none none none PSTN (b2) from no. I23 (regular A-Pty) PSTN (b1) from no. I22 used for CFx none none none none none none none

Status N/A N/A N/A N/A N/A

2.1.4 2.1.5 2.1.6 2.2.1

1 1 1 1

MTC None Expected None Expected MOC

Voice

MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16

IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17 missing yet IMSI MS1 (a) f.A1.2 I17

1900/01/00 none

00:00:00

0:00:00 none none 0:00:00

none none none none

N/A N/A N/A N/A

YES YES YES YES

Emergency

none 1900/01/00 00:00:00

2.2.2 2.2.3.1.A

1 1

MOC SS

Voice BOIC-exHC

MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16

IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17

1900/01/00 1900/01/00

00:00:00 00:00:00

0:00:00 none

none none

N/A N/A

YES YES

2.2.3.1.A

MOC

Voice

MSISDN MS1 (a) f.A1.2 I16

IMSI MS1 (a) f.A1.2 I17

1900/01/00

00:00:00

0:00:00

none

N/A

YES

2.2.3.1.A 2.2.3.1.A 2.2.3.1.A 2.2.3.2.B

3 4 5 1

MOC None Expected SS SS

Voice BOIC-exHC BOIC-exHC

MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 none MSISDN MS1 (a) f.A1.2 I16

IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2

I17 I17 I17 I17

1900/01/00 00:00:00 none 1900/01/00 00:00:00 1900/01/00 00:00:00

0:00:00 none none none

none none none none

N/A N/A N/A N/A

YES YES YES YES

2.2.3.2.B 2.2.3.2.B 2.2.3.2.B 2.2.4 2.2.5

2 3 4 1 1

MOC None Expected SS None Expected SS

Voice BOIC-exHC CFNRc

MSISDN MS1 (a) f.A1.2 MSISDN MS1 (a) f.A1.2 MSISDN MS1 (a) f.A1.2 MSISDN MS1 (a) f.A1.2 MSISDN MS1 (a) f.A1.2

I16 I16 I16 I16 I16

IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2

I17 I17 I17 I17 I17

1900/01/00 00:00:00 none 1900/01/00 00:00:00 none 1900/01/00 00:00:00

0:00:00 none none none none

none none none none none

N/A N/A N/A N/A N/A

YES YES YES YES YES

2.2.5

MTC

Voice

MSISDN MS1 (a) f.A1.2 I16

IMSI MS1 (a) f.A1.2 I17

1900/01/00

00:00:00

none

none

N/A

YES

2.2.5 2.2.6 2.2.7 2.2.7 2.2.7

3 1 1 2 3

MOC None Expected SS MOC MTC

Voice CFNRC CFB Voice Voice

MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 to be filled by VPLMN

IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17 IMSI MS2 (a) f.A1.2 I19

1900/01/00

00:00:00

0:00:00 none none none none

none none none none none

N/A N/A N/A N/A N/A

YES YES YES YES YES

none 1900/01/00 00:00:00 1900/01/00 1900/01/00 00:00:00 00:00:00

2.2.7 2.2.7 2.2.8 2.2.8

4 5 1 2

MOC SS SS None Expected

Voice CFB CFNRy

MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 none

IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17 IMSI MS1 (a) f.A1.2 I17 none

1900/01/00 1900/01/00

00:00:00 00:00:00

0:00:00 none none none

none none none none

N/A N/A N/A N/A

YES YES YES YES

1900/01/00 00:00:00 none

2.2.8

MTC

Voice

MSISDN MS1 (a) f.A1.2 I16

IMSI MS1 (a) f.A1.2 I17

1900/01/00

00:00:00

0:00:00

none

N/A

YES

2.2.8 4 2.2.8 5 2.3.1 1 2.3.1 2 2.4.2.1 1 2.4.2.2 2 2.4.3.1 1 2.4.3.2 2 GSMA SPECIFIC Test Cases

MOC SS MOC MTC N/A N/A N/A N/A

Voice CFNRy SMS-MO SMS-MT SMS-MO SMS-MT SMS-MO SMS-MT

MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS2 (a) f.A1.2 I18 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS1 (a) f.A1.2 I16 MSISDN MS2 (a) f.A1.2 I18

IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS2 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS1 (a) f.A1.2 IMSI MS2 (a) f.A1.2

I17 I17 I17 I19 I17 I17 I17 I19

1900/01/00 1900/01/00 1900/01/00 1900/01/00 1900/01/00 1900/01/00 1900/01/00 1900/01/00

00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00

none none none none none none none none

none none none none none none none none

N/A N/A N/A N/A N/A N/A N/A N/A

YES YES YES YES YES YES YES YES YES

IR24 TADIG-Input

39(44)

IR2461

GSMA Specific Help


A LINE BREAK FOR COMMENTS NEEDS TO BE ENTERED AS "LOWER SHIFT + RETURN" HERE
1 Date /Sign.

WARNINGS Do not enter data into any other cells unless you wish to overwrite the formula that is already in the cell. This will be the case, if you are need to chnage the test setup and use a different call party like MSx/ PSTNx. General use of the spreadsheet Do not delete or insert rows or columns on any of the pages, except the SETUP PAGE. Here it is allowed as an exemption to add lines in section 4. for OPERATOR SPECIFIC HINTS. Set up any filters on any page, filters are automatically set by the spreadsheet. - the grey numbers on the right side of the test cases are visible "counting steps" to make the time macro able to jump to the correct next input field. Don't change it without any reason. - all areas which are indicated as light green belong to GSMA responsibility and are not allowed to be changed! The yellow indicated test cases are free for modification by all OPERATORs (see GENERAL and TEST CASES)."

Initial 2008

HINTS - there is a TIME MACRO inserted, which allows you to insert the time into the testing document (based on your PC time). This can be used with the key combination "Ctrl + Low-Shift + A". Next to all test cases you will find a "red circle button" in the TESTING PAGE to remind you. IMPORTANT: Your PC might not allow to use macros! In this case you have to follow the instruction from your PC office programm and adjust the security options in EXCEL to the expected value (e.g. from high to medium) and save the file again. After the reopening, you will be asked for the macro activation, please confirm it. For TADIG it's not relevant, that your time stamp is 1:1 to the network element. In case of a clock offset on your PC the mismatch is always the same, so TADIG can suggest the right value in the switch. Only if your PC time is far away from real time, you should notify this in your sheet on TEST CASES (e.g. comments) and TADIG PAGE (extra note). All fields which require such a format are connected within the testing sequence (see grey digits). Please make sure if you are using the time macro that your PC clock is working in the 24h format. Check this under control panel/region settings ->clock/customized choose capitel letter "H" - DROP DOWN BOXES, if you want to use the keyboard instead of the mouse, enter the field and try "ALT + arrow down" - CHANGE OF LINK REFERENCES FOR USED MSx (a) / (b)- If you need to change such link reference, it might happen randomly, that the field lost its format as "standard" and you see only a text mark like "=I17" and not the related entry from that field. 1. Change the link reference as you want e.g. I17 to I23, 2. press "Ctrl + 1" and set the field again to STANDARD than OK 3. enter this field again and press F2 + ENTER.

Initial 2008

"UNPROTECT" PAGES - (there is no real protection!) Initial 2008 If for some reason you need to see the EXCEL lines as A-Z and 1-n, please use - depending on your EXCEL version (language) - the sixth menu option (EXTRAS) from the left in the menu bar, then choose "options" and then "view". Here you can set a flag to make the headers visible called "rows & columns".

DATA ENTRY (e.g. IREG RESULTS) Only enter data if input is requested in cells which are coloured light blue (e.g. SETUP SHEET, TEST CASES)

Initial 2008

IRxx GENERAL on this page you will see all test case descriptions which you can access from the top immediately via the blue buttons. The important feature is the linking of the content of the test case header + general description below the header + action content + expected result content! If you plan to change any content for the GSMA test description in those fields , this content is shown 1:1 on the test case page. Normally no changes are allowed for the operator, because it should be the same GSMA testing content for all operator. Please remember: the new IRxx will be sent from operator (HPLMN) to operator (VPLMN) to use the option Operator- Flexible Test Cases for their own requirements !

Initial 2008

SETUP PAGE For the test cases you want to be completed select "Yes" from the dropdown menu. I m p o r t a n t - remember to click the red selection button after selecting your Test Cases! This button sets the filters on the TEST and TADIG Pages!

Initial 2008

TEST CASE page Initial 2008 Only enter data into the light blue coloured cells. If these cells are within a test case, it will turn white when you have entered your data. Complete section A1.1 and A1.2 before starting the test cases. Don't change any test case header in here, because they are linked to the IRxx GENERAL page and should reflect only the content from there. Do not delete any grey numbers on the right side in the TEST CASES PAGE and TEMPLATES PAGE. They are used as "jump marks" to the next planned data entry field. In case of the TEMPLATES PAGE, you might need to adjust them. You can try to change them for testing purposes and see how they work (it is not comlicated). If you want to reset the whole TEMPLATE , use the button for it and it will be restored. There is a macro inserted, which allows you to insert the time into the testing document (based on your PC time). This can be used with the key combination "Ctrl + Low-Shift + A". You will find next to all test cases a "red circle button" in the TEST CASES PAGE, which reminds you of that. All fields which require such a format are connected within the testing sequence (see grey digits).

TEMPLATE PAGE - OPERATOR TEST CASES (TC) 1. If you want to create test cases on your own, please start with writing the description on the GENERAL PAGE (the DETAIL1-5 content cells are linked for the TC-header,"action" and "exp. results" to the TEST CASES PAGE). 2. Next, you need to select the requested 20.x TC plus confirm button! 3. After this is done you can specify the TC via PASTE button and chose one of the offered templates to modify it by deleting the unwanted content. 4. You might need to modify as well the numbers in grey, if the user should be able to jump from each time macro field into the next. (the first column and grey numbers in it are for the steps in vertical direction and the next column showing the horizontal steps. Try it in the TEMPLATE PAGE and you will see how they work) 5. Insert your new TC into the test box area. Please remember- DO NOT INSERT /DELETE COMPLETE LINES, CHANGE ONLY TEXT CONTENTS ! Tipp: You can colour not used areas above & below the new created test

Initial 2008

TADIG PAGE All data (except test cases 19.x and 20.x) are linked to the corresponding field in TEST CASES. If you as OPERATOR want to link your call details from TEST CASES to TADIG, please do it on your own responsibility. See as well the hint for "UNPROTECTED PAGES" no.3 above.

Initial 2008

10

INSTRUCTION PAGE In OPERATOR SPECIFIC HELP (yellow) you can enter your own comments on how to read your tests. For the GSMA (green) it will be done officially and you shouldn't change any comments. If there is a mistake, please create a change request (see AA34) to GSMA."

Initial 2008

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Operator Specific Help


A LINE BREAK FOR COMMENTS NEEDS TO BE ENTERED AS "LOWER SHIFT + RETURN" HERE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Date /Sign.

CALL DIVERSION

Feature Mode Sequence All calls Activate & register number ** 21 * Number # SEND Deactivate & deregister number ## 21 # SEND Activate to registered number * 21 # SEND Deactivate # 21 # SEND Verify *# 21 # SEND No answer Activate & register number ** 61 * Number # SEND Deactivate & deregister number ## 61 # SEND Activate * 61 * Number # SEND Deactivate # 61 # Verify *# 61 # SEND Unreachable Activate ** 62 * Number # SEND Deactivate ## 62 # SEND Verify *# 62 # SEND

Busy Activate ** 67 * Number # SEND Deactivate ## 67 # SEND Verify *# 67 # SEND All types Deactivate ## 002 # SEND All conditional types Deactivate ## 004 # SEND

CALL BARRING Feature Mode Sequence Barring all outgoing calls Activate * 33 * PIN # SEND Deactivate # 33 * PIN # SEND Verify *# 33 # SEND Barring all outgoing IDD calls Activate * 331 * PIN # SEND Deactivate # 331 * PIN # SEND Verify *# 331 # SEND Barring all outgoing IDD calls when roaming (except to home country) Activate * 332 * PIN # SEND Deactivate # 332 * PIN # SEND Verify *# 332 # SEND Barring all outgoing calls Activate * 333 * PIN # SEND Deactivate # 333 * PIN # SEND Verify *# 333 # SEND Barring all Incoming Calls Activate * 35 * PIN # SEND Deactivate # 35 * PIN # SEND Verify *# 35 # SEND Barring all incoming calls when international roaming Activate * 351 * PIN # SEND Deactivate # 351 * PIN # SEND Verify *# 351 # SEND Barring all calls Activate * 350 * PIN # SEND Deactivate # 350 * PIN # SEND Verify *# 350 # SEND Barring all incoming calls Activate * 353 * PIN # SEND Deactivate # 353 * PIN # SEND Verify *# 353 # SEND Deactivate all call barring # 330 * PIN # SEND Change call barring code ** 03 * old barring code * new barring code * new barring code # SEND

CALL WAITING Feature Mode Sequence Call waiting Activate * 43 # SEND Deactivate # 43 # SEND Verify *# 43 # SEND Reject call waiting or end call on hold 0 SEND End active call and switch to held or waiting call 1 SEND End a specific call (n = call number) 1n SEND Hold active call and retrieve held or waiting call 2 SEND Hold all active calls and except one (n = call number) 2n SEND Add held call into active call 3 SEND Hold active call and place outgoing call Number SEND Alternate between callers SEND End all calls simultaneously except call waiting END

SIM SECURITY CODES Feature Sequence Change SIM Card PIN ** 04 * old PIN * new PIN * new PIN # Change SIM Card PIN 2 ** 042 * old PIN * new PIN *new PIN # Change SIM Card PUK ** 05 * old PUK * new PUK * new PUK # Change SIM Card PUK 2 ** 052 * old PUK * new PUK * new PUK # Display Handset IMEI *# 06 #

CALLER ID Feature Mode Sequence Incoming (CLIP) Activate * 30 # SEND Deactivate # 30 # SEND Verify *# 30 # SEND Outgoing (CLIR) Activate * 31 # SEND Deactivate # 31 # SEND Verify *# 31 # SEND Outgoing per-call block * 31 # Number SEND Outgoing per-call block # 31 # Number SEND Outgoing per-call force-send # 31 # Number SEND Outgoing per-call force-send *# 31 # Number SEND

EMERGENCY Feature Sequence Emergency Call 112 SEND

Yes/No Dropdown

Call Quality Dropdown

Yes No Test Completed Dropdown

Excellent Good Fair Poor Bad

PASS FAIL Not Performed Count 6 Count 4

Test Case Selection Dropdown YES No

Test Case Paste Value 10 D1588 20.1

Today 2012/12/05

MS Dropdown MS1(a) MS2(a) MS3(a)

Paging Dropdown A(Paging) B(Pre-Paging)

Test Case 1 2 3 4 5 6 7 8 9 10 D1012 D1076 D1140 D1204 D1268 D1332 D1396 D1460 D1524 D1588 20.1 20.2 20.3 20.4 20.5 20.6 20.7 20.8 20.9 20.10

Você também pode gostar