Escolar Documentos
Profissional Documentos
Cultura Documentos
ZebraTechnologies
Page1of8
Auto-detect Printers
To Auto-Detect printers connected via the USB or IP Ethernet interfaces, press the Auto-Detect Toolbar button and choose the menu option PrinterAuto-Detect or right click on the list and select Auto-Detect Printers. Once you start an Auto-Detect, the dialog box shown in Figure 1 will appear.
Figure 1 - Auto-Detect Dialog Box You can cancel Auto-Detection at any time by pressing the Cancel button.
ZebraTechnologies
Page2of8
Once the Auto-Detection is complete, the printers detected will be added to the printer list. NOTE: Ethernet connected printers are detected by the application broadcasting a UDP packet out onto the network. UDP port number 4201 is used for the discovery process. Some networks filter out UDP packets. This means that it may not be possible to detect all printers on your network. See your network administrator for more information. If you are not able to Auto-Detect your network printers, follow the manual add instructions in the next section.
Figure 2 - Configuring a Serial Printer Enter the Printer Name, Model, Communication Type, etc for the printer you wish to add.
ZebraTechnologies
Page3of8
ZebraTechnologies
Page4of8
ZebraTechnologies
Page5of8
2) Select the menu option PrinterPrint EPL Test Page or PrinterPrint ZPL Test Page. 3) Right click on the selected printers and select Print EPL Test Page, or Print ZPL Test Page.
ZebraTechnologies
Page6of8
Firmware Downloader Ready to start download Once you have configured the printers in the list, you are ready to start updating the printers. To start downloading to ALL configured printers in the list, press the Download to All Printers toolbar button or select the PrinterDownload All menu option.
ZebraTechnologies
Page7of8
To start downloading to SPECIFIC printers in the list, select the printers of interest and select the PrinterDownload To Selected menu option.
Figure 6 - Firmware Downloader Downloading Firmware File Once Downloading has begun the Progress of each printer will be shown in the Download Status column as shown in Figure 6. The Cancel Download toolbar button and the PrinterCancel Download menu options become active. To cancel ALL downloads in progress, select either one of these methods or right click on the printer list and choose Cancel Download.
Simultaneous Downloads
If you have many printers to update and are looking for a way to accelerate the overall time it takes to update the printer firmware, you can increase the number of simultaneous downloads. Selecting the ToolsOptions menu option will show the dialog in Figure 7.
Figure 7 - Options Dialog The default number of simultaneous downloads is 1. Increasing this number causes several printers to updated simultaneously. NOTE: More simultaneous downloads require more of your computer resources. Some computers may slow down with simultaneous downloads or as more printers are added for simultaneous downloading.
ZebraTechnologies
Page8of8