Escolar Documentos
Profissional Documentos
Cultura Documentos
Sl. No
Service No.
Service
Line No.
Type of Valve
Location
Size
Material of Construction (For Major Parts) Body Cast Iron Disc Ductile Iron Shaft SS410 Seat EPDM
Fluid Handled
Enclosure protection NA
Acessories required NA
Service water distribution pumps suction and discharge Service water transfer suction
DN 100
10
NA
Butterfly Valve
DN 300
10
Cast Iron
Ductile Iron
SS410
EPDM
NA Spring opposed diaphragm / cylinder (Single acting) Spring opposed diaphragm / cylinder (Single acting) NA
NA
NA
NA Limit switches, Travel indicator, Handwheel Limit switches, Travel indicator, Handwheel NA
DN 300
10
Cast Iron
Ductile Iron
SS410
EPDM
Service Water
5-V5-001
5-OD 90 HDPE
DN 100
10
Cast Iron
Ductile Iron
SS410
EPDM
Service Water
5-OD 90 HDPE
Butterfly Valve
Service water line from DGT - recirculation Drinking water transfer pump suction
DN 100
10
Cast Iron
Ductile Iron
SS410
EPDM
NA
NA
NA
NA
3 NA 2 Spring opposed diaphragm / cylinder (Single acting) Air to open 1/2" NPT (F) (Failed close) 1/4" NPT (F) IP-65 for SOV, Positioner & Limit switches Limit switches, Travel indicator, Handwheel NA NA NA NA NA
DN 100
10
Cast Iron
Ductile Iron
SS410
EPDM
DN 100
10
Cast Iron
Ductile Iron
SS410
EPDM
Drinking water
Note : All the above valves should be supplied with two (2) nos companion flanges with HT bolts & fasteners. Other accessories like actuators complete with drive (for motorised) with integral starter should be provided.All motorised valves shall be provided with manual chain wheel.Local display on valves for open , close, L/R & % opening shall be considered with position feedback transducer with 4 to 20mA signal. End limit switches shall be 2NO + 2NC (with DPDT).