Escolar Documentos
Profissional Documentos
Cultura Documentos
DATA SHEET
book, halfpage
M3D109
Philips Semiconductors
Product specication
BC869
PINNING PIN 1 2 3 emitter collector base DESCRIPTION
handbook, halfpage
2 3 1
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb Note 1. Device mounted on a printed-circuit board, single sided copper, tinplated, mounting pad for collector 6 cm2. For other mounting conditions, see Thermal considerations for SOT89 in the General Part of associated Handbook. PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature Tamb 25 C; note 1 CONDITIONS open emitter open base open collector 65 65 MIN. MAX. 32 20 5 1 2 200 1.35 +150 150 +150 V V V A A mA W C C C UNIT
1999 Apr 08
Philips Semiconductors
Product specication
BC869
1. Device mounted on a printed-circuit board, single sided copper, tinplated, mounting pad for collector 6 cm2. For other mounting conditions, see Thermal considerations for SOT89 in the General Part of associated Handbook. CHARACTERISTICS Tj = 25 C unless otherwise specied. SYMBOL ICBO IEBO hFE PARAMETER collector cut-off current emitter cut-off current DC current gain CONDITIONS IE = 0; VCB = 25 V IE = 0; VCB = 25 V; Tj = 150 C IC = 0; VEB = 5 V IC = 5 mA; VCE = 10 V; see Fig.2 IC = 500 mA; VCE = 1 V; see Fig.2 IC = 1 A; VCE = 1 V; see Fig.2 DC current gain BC869-16 BC869-25 VCEsat VBE fT collector-emitter saturation voltage base-emitter voltage transition frequency IC = 1 A; IB = 100 mA IC = 5 mA; VCE = 10 V IC = 1 A; VCE = 1 V IC = 500 mA; VCE = 1 V; see Fig.2 100 160 620 250 375 500 1 mV mV V MHz MIN. 50 100 60 TYP. MAX. 100 10 100 375 UNIT nA A nA
1999 Apr 08
Philips Semiconductors
Product specication
BC869
MGD845
400
hFE
300
200
100
0 101 VCE = 1 V.
10
102
103
IC (mA)
104
1999 Apr 08
Philips Semiconductors
Product specication
BC869
SOT89
b3
E HE
2
b2
3
c
w M
b1 e1 e
2 scale
4 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.6 1.4 b1 0.48 0.35 b2 0.53 0.40 b3 1.8 1.4 c 0.44 0.37 D 4.6 4.4 E 2.6 2.4 e 3.0 e1 1.5 HE 4.25 3.75 L min. 0.8 w 0.13
EUROPEAN PROJECTION
1999 Apr 08
Philips Semiconductors
Product specication
BC869
This data sheet contains target or goal specications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains nal product specications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specication is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specication. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1999 Apr 08
Philips Semiconductors
Product specication
BC869
1999 Apr 08
For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Philips Electronics N.V. 1999
Internet: http://www.semiconductors.philips.com
SCA63
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
115002/00/04/pp8