Escolar Documentos
Profissional Documentos
Cultura Documentos
inView, iMoves new generation immersive video-based surveillance solution, delivers cost-effective, 100% persistent surveillance for wide area perimeters and large in-door spaces. iMoves immersive technology overcomes the shortfalls security personnel experience with todays CCTV technology too many cameras and too few eyes. Critical infrastructure and force protection over large areas is attainable with iMoves innovative inView Surveillance Solutions. inView solutions enable multiple, simultaneously acquired video streams to be stitched together in real-time to create a single, wide area immersive display. This state-of-the-art capability provides enhanced situational awareness and maximum actionable intelligence to the system operator. Rather than a confusing array of CCTV soda straw scenes displayed across a wall of video monitors, inView operators view, roam and zoom seamlessly throughout a single display of the wide area immersive view. This unprecedented immersive view of the surveillance area enables a single inView operator to do the work of several CCTV operators.
Additionally, inView maintains full coverage while supporting high resolution optical zoom for threat assessment. Operators are able to concentrate on the event at hand knowing surveillance is persistent on the wide area and that any further incursions will be detected and alarmed. This is far superior to CCTV solutions that lose area coverage when operators narrow the field of view to zoom and gain greater detail of an incident. inView FlexG sensors achieve a dramatic reduction in the number of cameras required for wide area coverage 1 FlexG Sensor delivers coverage equal up to 25 CCTV cameras. Installation, maintenance
and total cost of ownership are significantly reduced using inView architecture. inView architecture is based on general IT computing platforms and scales easily to address the most demanding wide-area requirements. iMoves software-centric engine employs the latest in digital broadband video and IP network platforms. It enables all aspects of immersive video capture, transport, process and display of real-time, multicamera video streams in a wide-area immersive view. inView solutions include a full range of advanced automation capabilities, such as motion detection and alarm response, and interfaces with existing CCTV architecture and can be integrated with third party intelligent video applications. With inView, 100% persistent surveillance of wide area perimeters is now attainable with superior performance, less infrastructure complexity and cost benefits on both installation and operational expenses.
Wide-View Display
Wide-View Display optimally exploits high-resolution immersive video acquisition. The key to effective utilization of the wide-area panoramic video is the ability to display the video in a seamless and perspectively-correct wide-view format, and in real-time all achieved by iMoves software suite.
Wide-View displays employ two flat screen monitors (sizes ranging from dual 20 to dual 46 monitors) together displaying a seamless image from 3,200 to 3,840 pixels in width and over 3.8 mega-pixels in total. This very wide, high-resolution display greatly enhances operator effectiveness and situational awareness when dealing with large areas or long perimeters. The Wide-View high-resolution display of such a large swath of critical coverage area is unmatched in the surveillance industry today. With the Wide-View Display the operator sees more and pans less.
iMove, Inc 1732 NW Quimby Portland, OR 97209 Main: 503.221.2449 fax: 503.221.2172 www.imoveinc.com
A dedicated, pan, tilt, zoom threat assessment camera is integrated with the inView Flex G sensors and displays. The blue box shows the threat assessment camera view within the immersive scene and is presented in a separate window on the display. An orange guard zone has been set up by the operator to detect any movement within the area.
Upon detection of motion within the guard zone, the threat assessment camera automatically moves to the location and a high resolution view of the incident is presented to the operator. All the while, all other guard zones continue to be monitored for any other incursions.
iMove, Inc 1732 NW Quimby Portland, OR 97209 Main: 503.221.2449 fax: 503.221.2172 www.imoveinc.com
The Management Display shows a map of all sensors, established guard zones and their operational status. An alarming sensor and direction of the alarm event are shown.
Flex G Sensors
inView FlexG Sensors provide unparalleled capabilities for optimizing the resolution, coverage footprint and operational performance of wide-area surveillance solutions. By embedding multiple imagers into a single platform (with up to 11.5 million total pixels) and aligning the imagers in patterns tailored to the specific site, iMoves FlexG sensor achieves dramatic performance and cost benefits over conventional sensors and cameras.
A FlexG Sensor can be configured with up to six integrated imagers. On the right, a FlexG Sensor with 5 40 degree field of view cameras is shown (w/o enclosure). To achieve perimeter coverage of a by mile area, iMove will deploy 9 such FlexG sensors as contrasted with CCTV solutions involving 250 cameras.
iMove, Inc 1732 NW Quimby Portland, OR 97209 Main: 503.221.2449 fax: 503.221.2172 www.imoveinc.com
Spotlight uses high resolution video inserts within a wide area immersive scene to create the most effective balance between situational awareness and fine detail. For example, while full situational awareness within a high bay facility needs to be maintained, it is distinct locations on the floor where the conduct of key processes demands identification of tools, individuals, and procedures. A single FlexG Sensor provides the solution using two wide field of view lenses covering the full facility and four spotlight, high resolution lenses. The inView software dynamically integrates these and displays a complete immersive view embedding the high resolution information.
The Spotlight feature maintains full facility awareness while providing high resolution inserts for fine detail.
iMove, Inc 1732 NW Quimby Portland, OR 97209 Main: 503.221.2449 fax: 503.221.2172 www.imoveinc.com
inView Architecture
inView solutions are an all-digital, IP network architecture using multi-cast Gigabit Ethernet and IT grade computer platforms that integrates the full range of advanced video processing and transport functions for real-time viewing (at site and/or remote workstations). Our solution offers a feature rich environment for video search and playback controls, incident editing and export, archive, user rights configuration and system status monitoring. inViews open architecture also allows for integration of intelligent video software as well as existing security infrastructure such as door and fence alarms and CCTV installations. The inView Surveillance Solutions scale in capabilities and size, offering cost effective alternatives to meet a broad range of security needs.
GigE Network Switches (Dual) SD #1
Sensor Display
Sensor Segment
IDU #1 Image Database Immersive Image Power Control SSU/MDU #1 Sensor Service Motion Detection
SDU #1
SDU #2
MD
Management Display
SDU #3
Sensor Display Unit
Sensor Segment
IDU #N Image Database Immersive Image Power Control SSU/MDU #N Sensor Service Motion Detection
Door/Fence Alarms
iMove, Inc 1732 NW Quimby Portland, OR 97209 Main: 503.221.2449 fax: 503.221.2172 www.imoveinc.com
GigE Comm
EA External Alarm
SD #2
Screen #1
GigE Comm
SDU #1
Sensor Display Unit
SD #1
Screen #1 CS Central Services AS Archive Services