Escolar Documentos
Profissional Documentos
Cultura Documentos
Civil building Infrastructure Offshore Petrochemical Power Rail Marine new-build Marine dry dock Marine sea stock
Our coatings are unrivalled in performance and protection among asset owners, contractors, fabricators and applicators across the globe, helping customers meet the challenges they face today, and tomorrow. Experience, innovation and integrity thats what makes PMC the ideal coatings partner.
SigmaCover applications
The SigmaCover range of protective coatings is widely used and trusted to meet the challenging environments found in the Civil building, Infrastructure, Offshore, Petrochemical and Power markets.
Infrastructure
l Bridges l Port and harbor structures l Waste and water facilities
Power
l Power plants l Wind turbines
Civil building
l Airports l Shopping centers l Sport complexes
Petrochemical
l Structural steel l Tank externals
Offshore
l Coastal structures l Drilling rigs l FPSOs l Offshore platforms
SigmaCover 280
Universal epoxy primer lE xcellent adhesion to non-ferrous substrates and galvanized steel lE xcellent universal primer for atmospheric or immersion applications lC ompatible with well-designed cathodic protection systems l Long recoating intervals lS uitable on wet blast substrates (damp or dry)
SigmaCover 256
Zinc phosphate recoatable epoxy primer lS uitable for atmospheric conditions lE xcellent corrosion resistance in industrial or coastal applications lC old-cure characteristics down to -10C/14F with unlimited recoatability lG ood adhesion to galvanized steel lE asy application by brush, roller and spray
SigmaCover 522
Micaceous iron oxide pigmented epoxy sealer lS pecifically designed as sealer for zinc-rich and thermal metal-sprayed surfaces lC an be used as a primer and sealer or coating on steel, thermal metal-spray zinc and galvanizing lU sed for both atmospheric and immersion applications l Good abrasion and impact resistance lH igh-temperature resistance up to 200C/392F in dry atmospheric conditions
SigmaCover 211
Epoxy concrete primer and sealer l Specifically designed for concrete substrates lG ood chemical resistance lG ood impact and abrasion resistance lE asy to clean
SigmaCover Corrosion resistance Temperature resistance Touch-dry Low-temperature cure Recoatability Film build (m) Volume solids (%)
Buildcoats
SigmaCover 805
High-solids epoxy l Direct to metal, tar-free replacement for tar epoxy l Good abrasion resistance lC ompatible with well-designed cathodic protection systems l Outstanding seawater resistance lE xcellent corrosion resistance in industrial and coastal applications
SigmaCover 456
Recoatable epoxy coating l Excellent durability, tough and with long-term flexibility lG ood adhesion to aged alkyds, chlorinated rubbers and epoxy coatings lC old-cure characteristics down to -10C/14F with unlimited recoatability l Easy to apply by brush, roller and spray lS pecial high-solids, low-VOC version available
SigmaCover 410
Economy epoxy buildcoat for use in atmospheric land and marine conditions l Excellent durability on steel or concrete lC an be recoated with two-pack and conventional coatings, even after prolonged weathering conditions l Easy application by airless spray lA vailable in micaceous iron oxide and selected color range lT he low-temperature cure version allows curing down to -5C/23
SigmaCover 480
Chemical-resistant finish l General purpose epoxy lR esistance to impact and abrasion lE xtended recoating intervals lE asy application by brush, roller and spray lE asy to clean
SigmaCover 435
Micaceous iron oxide pigmented recoatable epoxy coating l Excellent durability, tough with long-term flexibility lC old-cure characteristics down to -10C/14F with unlimited recoatability lG ood adhesion to aged alkyds, chlorinated rubber and epoxy coatings lT emperature resistance up to 200C/392F
SigmaCover 300
High build coal tar epoxy lO utstanding water and crude oil resistance lC old-cure characteristics down to -5C/23F l Good abrasion resistance lC ompatible with well-designed cathodic protection systems lE xcellent corrosion resistance in industrial and coastal applications
SigmaCover Corrosion resistance Touch-dry Low-temperature cure Recoatability Film build (m) Volume solids (%)
SigmaCover 640
Two-pack, ultra-high solids epoxy l Self-priming, surface-tolerant epoxy in aluminum and colors l Convenient 1:1 mixing ratio by volume l Low-temperature cure version available l Excellent surface-tolerant characteristics l Resistance to industrial, coastal and offshore conditions
SigmaCover 240
High-solids, low-temperature cure epoxy l Outstanding water and crude oil resistance lC old-cure characteristics down to -20C/-4F l Good abrasion resistance l Topcoating up to 6 months
SigmaCover 1000
High-build, solvent-free epoxy l Ultra high-build, up to 1000 microns in one coat l Single coat protection l Used for both atmospheric or immersion applications l Can be immersed after only 4 hours ambient cure l Applied by heavy duty, single-feed airless equipment
SigmaCover 630
High-solids epoxy lP rimer and buildcoat, compatible with most aged coatings lG ood impact and abrasion resistance lR esistance to splash and spillage of a wide variety of chemicals lE xcellent corrosion resistance in industrial or coastal applications lL ow-temperature and tropical-grade cure available
SigmaCover Corrosion resistance Surface tolerance Touch-dry Low-temperature cure Recoatability Film build (m) Volume solids (%)
SigmaCover 1000
l Solvent-free, high-build, one-coat maintenance epoxy
SigmaCover 805
l High-solids epoxy direct applicable to steel
(Amerlock 400)
SigmaCover 566
l Epoxy acrylic tiecoat with good adhesion on coil-coated substrates such as PVC and polyester
SigmaCover 522
l Micaceous iron oxide pigmented epoxy sealer, specifically for zinc-rich and metal-sprayed surfaces
SigmaCover 480
l Chemical, impact and abrasion-resistant epoxy finish
SigmaCover 456
l Recoatable epoxy coating curing at temperatures down to -10C/14F
SigmaCover 435
lL ow-temperature micaceous iron oxide pigmented recoatable epoxy coating. Heat resistance up to 200C/392F
SigmaCover 410
l Economy buildcoat. Low-temperature cure option
SigmaCover 300
l High-build coal tar epoxy highly resistant to water and crude oil. Cold-cure option down to -5C/23F
SigmaCover 280
l Universal epoxy primer for atmospheric and immersion conditions. Cold-cure option
SigmaCover 256
l Zinc phosphate recoatable epoxy primer. Cold-cure down to -10C/14F
(Amercoat 240)
No rights can be derived from the content of this publication. Unless otherwise agreed upon in writing, all products and technical advice given are subject to our standard conditions of sale, available on our website www.sigmacoatings.com. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
PPG Protective & Marine Coatings P.O. Box 58034, 1040 HA Amsterdam, The Netherlands Tel: +31 (0)20 407 5050, Fax: +31 (0)20 407 5059 Email: sigmacoatings.protective@ppg.com Website: www.sigmacoatings.com/protective
943720/09-09