Escolar Documentos
Profissional Documentos
Cultura Documentos
SERIES GB 25/...
The surfaces on which the profile will be placed adjoining the joint
must be smooth and free from contamination. The protruding part
of the profile will be placed in the joint, so that the side plates pro-
vided with cellular rubber strips lie firmly on the base. Then pro-
files are aligned and fixed by screws and dowels. If joints on the
inside of the building are to be covered, it is sufficient to glue the
profiles in place with a contact adhesive. For this, the wall sur-
faces, however, are to be absolutely smooth and free from con-
tamination and paint. Always leave a gap of approx. 5 mm at the GB 25/300
butt joints of the aluminium profiles in case of exterior use. After
installation a permanently flexible sealing compound should be
applied to these gaps.
SERIES GB 12/...
The surfaces on which the profile will be placed adjoining the joint
must be smooth and free from contamination. Then profiles are
aligned and fixed by screws and plugs. If joints on the inside of
the building are to be covered, it is sufficient to glue the profiles in
place with a contact adhesive. For this, the wall surfaces, how-
ever, are to be absolutely smooth and free from contamination
and paint. Always leave a gap of approx. 5 mm at the butt joints
of the aluminium profiles in case of exterior use. After installation
a permanently flexible sealing compound should be applied to
these gaps.
Please remember when installing the profiles with fold GB 12/500 Scale 1 : 2
insert: