Escolar Documentos
Profissional Documentos
Cultura Documentos
C
W H
Q
T4 M T1
L
U4 B
Z B1
V
X
45 40 35 30 25 20 15 10 5 0 ft
VarioLift Plus
VarioLiftPlus: Variable boom mounting positions for optimized lift capacities
with the same working range with a different working range
2A
Hole A
Hole B 3B
3B
Version
Hole 3 3B Standard
3A
Hole 2
Kinematic Variant 3B Standard: Kinematic Variant 3A:
Increased lift capacities below ground level Altered range curve with additional reach
and when working at extended reach depth, e.g. for unloading from ships
Kinematic Variant 2A:
Increased lift capacities above ground level
The lift capacities are stated in lb on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface with closed steering axle. Capacities shown in
brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle (travel position) with stabilizers raised, and over rigid axle
with stabilizers down. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (x). Lift capacities do not
include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deducted from the above figures. Lifting capacity of the excavator is limited
by machine stability, hydraulic capacity and maximum permissible load of the load hook.
The lift capacities are stated in lb on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface with closed steering axle. Capacities shown in
brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle (travel position) with stabilizers raised, and over rigid axle
with stabilizers down. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (x). Lift capacities do not
include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deducted from the above figures. Lifting capacity of the excavator is limited
by machine stability, hydraulic capacity and maximum permissible load of the load hook.
55 50 45 40 35 30 25 20 15 10 5 0 ft
VarioLift Plus
VarioLiftPlus: Variable boom mounting positions for optimized lift capacities
with the same working range with a different working range
2A
Hole A
Hole B 3B
3B
Version
Hole 3 3B Standard
3A
Hole 2
Kinematic Variant 3B Standard: Kinematic Variant 3A:
Increased lift capacities below ground level Altered range curve with additional reach
and when working at extended reach depth, e.g. for unloading from ships
Kinematic Variant 2A:
Increased lift capacities above ground level
The lift capacities are stated in lb on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface with closed steering axle. Capacities shown in
brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle (travel position) with stabilizers raised, and over rigid axle
with stabilizers down. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (x). Lift capacities do not
include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deducted from the above figures. Lifting capacity of the excavator is limited
by machine stability, hydraulic capacity and maximum permissible load of the load hook.
The lift capacities are stated in lb on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface with closed steering axle. Capacities shown in
brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle (travel position) with stabilizers raised, and over rigid axle
with stabilizers down. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (x). Lift capacities do not
include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deducted from the above figures. Lifting capacity of the excavator is limited
by machine stability, hydraulic capacity and maximum permissible load of the load hook.
55 50 45 40 35 30 25 20 15 10 5 0 ft
VarioLift Plus
VarioLiftPlus: Variable boom mounting positions for optimized lift capacities
with the same working range with a different working range
Hole D
Hole C 3D
3D
Hole 3
3C
Hole 2 Version
3D Standard
Kinematic Variant 3D Standard: Kinematic Variant 3C:
Increased lift capacities below ground level Altered range curve with additional reach
and when working at extended reach depth, e.g. for unloading from ships
The lift capacities are stated in lb on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface with closed steering axle. Capacities shown in
brackets are valid when the undercarriage is in longitudinal position and are established over the steering axle (travel position) with stabilizers raised, and over rigid axle
with stabilizers down. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (x). Lift capacities do not
include the weight of a grapple, clamshells, magnet or other lifting devices, which must be deducted from the above figures. Lifting capacity of the excavator is limited
by machine stability, hydraulic capacity and maximum permissible load of the load hook.
D2
D1 Hydraulic Cab Elevation
(Parallelogram)
B1 9’ 6”
B2 17’ 8”
C1 11’ 1”
C2 19’ 4”
D1 4’ 6”
D2 5’ 4”
E 10’10”
C2
B2 The parallelogram cab raiser allows the operator to choose his field of
view between dimensions B1 and B2. For a transport height lower
C1 E than C1 the shell of the cab can be removed. The overall height is
B1
then E.
An optional front window screen can be installed for additional cab
protection.
For further information see “Attachment-Information – Liebherr Hydraulic Clamshells and Grapples”. To operate a magnet the installation of a
generator is required; please contact your Liebherr dealer or the factory for further information.
Printed in Germany by Wolf RG-BK LHB/VF 8421025-1-03.06 Illustrations and data may differ from standard equipment. Subject to change without notice.
Electric fuel tank filler pump •
Beacon •
Maintenance-free swing brake lock •
Tinted windows •
Handrails, Non slip surfaces •
Door with sliding window •
Main switch for electric circuit •
Optical warning if outriggers are not fully retracted •
Engine hood with lift cylinders •
Sun visor •
Pedal controlled positioning swing brake •
Sun roller blind •
Reverse travel warning system •
Auxiliary heating •
Sound insulation •
Electronic theft protection •
Customized colors •
Wiper/washer •
Pin lock upper/lower
Cigarette lighter and ashtray •
Maintenance-free HD-batteries •
Additional flood lights •
Extended tool kit •
Lockable tool box •
Tool kit •
Attachment S O
Flood lights •
Hydraulics S O Hydr. lines for clam operation in stick •
Industrial-type gooseneck sticks with remote hydraulic pin puller •
Hydraulic tank shut-off valve •
Sealed pivots •
Extra hydr. control for hydr. swivel •
Safety lift hook •
Pressure compensation •
Liebherr line of clams •
Hook up for pressure checks •
Liebherr semi-automatic central lubrication system •
Pressure storage for controlled lowering of attachments with engine
Liebherr fully-automatic central lubrication system •
turned off •
Likufix •
Filter with partial micro filteration (5 µm) •
Safety check valves on hoist cylinder, regenerative •
Electronic pump regulation •
Safety check valves on stick cylinder, regenerative •
Stepless mode system (ECO) •
Hose quick connection •
Flow compensation •
Hydraulic or manual quick change tool adapter •
Four mixed modes (adjustable) •
Customized colors •
Full flow micro filtration •
Special buckets and other tools •
Bio degradable hydraulic oil •
Overload warning device •
Additional hydraulic circuits •
Two way valves for bucket/clam use •
Locking of connections for clam operation •
Cylinders with shock absorber •
Engine S O
After-cooled •
Unit pump system •
Turbo charger •
Dry-type air cleaner w/pre-cleaner, main and safety element •
Air filter with automatic dust ejector •
Sensor controlled engine idling •
Engine cold starting aid •
S = Standard, O = Option
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the
knowledge and approval of Liebherr to retain warranty.