Escolar Documentos
Profissional Documentos
Cultura Documentos
LED
Connect to Computer
Welcome message
The first screen is the Welcome Screen. To continue on to the installation: 1. Click Install Samsung SecretZone
Figure 2 - Samsung SecretZone Install Wizard Welcome
NOTE: WHEN YOU INSTALL THE SECRETZONE PROGRAM ON THE WINDOWS 7, YOU SHOULD RUN THE "APPINST.EXE" MANUALLY IN SAMSUNG EXTERNAL HARD DRIVE. THE WINDOWS 7 DOES NOT SUPPORT THE AUTORUN FUNCTION.
The first options to choose is the preferred language. From the Choose Setup Language pull-down: 2.Choose the preferred language From the Welcome screen: 3.Click Next>
The Progress Bar indicates how far the installation has gone and how much further it has to finish. From the Create the account for the administrator screen: 4. Click in the box to the right of Password and enter a password 5. Click in the box to the right of Confirm and re-enter the same password 6. Click Next> Provided that the installation was successful, the final Samsung SecretZone Install Wizard screen appears. 7.Click Finish
Logging In
The first screen is the Login for Administrator/User prompt. Make sure that THE ADMINISTRATOR check box is checked. 2. Click in the Password field 3. Enter your PASSWORD 4. Click OK
Figure 4 - Login Screen
This screen is to designate the size and location of the volume. The default size is 1024 megabyte however, a volume can be created up to the size of the Free Space displayed to the right of the letter designation. In the following screen, the letter designation is F.
NOTE: THE FAT32 FILE SYSTEM LIMITS THE SIZE OF ANY FILE ON THE DRIVE TO A MAXIMUM OF 4GB. TO ENSURE RELIABLE OPERATION UNDER FAT32, SECRETZONE LIMITS EACH VIRTUAL DRIVE'S SIZE TO A MAXIMUM OF 2GB. WINDOWS PC OWNERS WHO WISH TO UTILIZE CAPACITY GREATER THAN 2GB SHOULD REFORMAT THEIR EXTERNAL SAMSUNG DRIVE TO NTFS IN THE WINDOWS OPERATING SYSTEM
Samsung SecretZone Quick User Manual Ver 2.0
The File Selection screen is to assign a Volume name and file type. For the purposes of this manual, the File Type will be the default MSR FILE. 3. Click in the File Name box 4. Type Finances 5. Click OK
Figure 7 - Volume Name and Type
10
In the Create the account for the volume image screen create the password and algorithm for your new drive. 10. Click in the Password box and enter the password for your new virtual drive 11. Click in the Confirm box and retype your password 12. Click in the Algorithm box and choose the algorithm from the pull-down list. For the purposes of this manual, choose AES-128 13. Click Next >
Figure 10 - Creating the Password and Algorithm
11
The Result screen gives a summary of the new Virtual Drive. 14. If you are satisfied with the information displayed, click Finish Option 1 To go back and make any changes, click Back.
Figure 11 - Results screen gives a summary
12
The Creating the volume image progress bar displays where how much of the task has completed.( 1 GB = 1 min, 10 GB = 12 min ) The Main Screen displays the newly created volume displaying the drives alpha designation. From this point, you can exit out of the software and see where the new Virtual Drive is in Windows Explorer.
Figure 12 - Your Virtual Drive in Windows
13
Copyright 2009 by Clarus, Inc. All right reserved Inquiries Clarus, Inc. Homepage http://www.clarussoft.com/
Samsung SecretZone Quick User Manual Ver 2.0
14