Escolar Documentos
Profissional Documentos
Cultura Documentos
Lower maintenance
Precision Synchronization
No Environmental
Limitations
Disc couplings arent limited by the
operating range of greases. There is
nothing to leak or become
contaminated. Ozone, sunlight, or
moisture do not affect its lifespan.
Disc couplings are not sensitive to
temperature variations.
Long Life
If you want to save parts, labor,
inventory, and downtime try Falk
Freedom Disc couplings. The flexing member in a Disc coupling is of
an all-steel construction, with
excellent fatique properties. In fact,
a properly selected and aligned
coupling may never need
replacement parts.
FD06A10
FDG General
Purpose Designs
FDP High
Performance Designs
FD Designs
Falks original spacer coupling
design provides still higher torque
and bore capacities for heavy-duty
applications. This design uses many
thin discs in unitized packs to provide
generous misalignment capacity and
high torque ratings. FD designs are
available up to 2,772,000 lb.-in.
torque and bores up to 15.75.
Improved Fasteners
To further reduce maintenance
needs, the drive bolts for the FDG
& FDP are coated with Dacromet.
This exceptional quality coating
delivers 4-way corrosion resistance,
including self-repairing properties.
Any way you look at it, this coupling redefines freedom from maintenance. Freedom Disc Couplings...
one more reason you cant afford
not to use Falk.
Dacromet properties
Salt spray performance: 500 hrs minimum
Heat resistance: 550 F (287 C) to 650
F (343 C)
Coating thickness: 0.2-0.3 mils
FD06A10 SPACER DESIGN
Close-Connected Couplings
Falk close-connected couplings
feature a split spacer spool to allow
for the removal and replacement of
the disc or discpack without the
need to move connected equipment. The short gaps of these
couplings allow them to be used in
place of common gear and grid
couplings as well as other closeconnect disc designs.
Available Designs . . . . . . . . . . . . . . . . . . . . . . 6
How to Select . . . . . . . . . . . . . . . . . . . . . . . . 7
Quick Selection Method . . . . . . . . . . . . . . . . . 8 & 9
Service Factors . . . . . . . . . . . . . . . . . . . . . . . 10
How to Order . . . . . . . . . . . . . . . . . . . . . . . 11
Dimensions & Specifications
Series FDG
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . 12
Type FDG10CC, 11CC & 12CC . . . . . . . . . . . . . . 13
Type FDG10DD, 11DD & 12DD. . . . . . . . . . . . . . . 14
Type FDG30NN . . . . . . . . . . . . . . . . . . . . . . 15
Type FDG31AA, AL, LL . . . . . . . . . . . . . . . . . . . 16
Type FDG20NN . . . . . . . . . . . . . . . . . . . . . . 17
Type FDG20AN . . . . . . . . . . . . . . . . . . . . . . 18
Type FDG50NN, 55NN . . . . . . . . . . . . . . . . . . . 19
Type FDG50AA, 55AA . . . . . . . . . . . . . . . . . . . 20
Series FDP
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . 21
Type FDP10CC, 11CC & 12CC . . . . . . . . . . . . . . . 22
Type FDP30NN . . . . . . . . . . . . . . . . . . . . . . . 23
Type FDP31AA, AL, LL. . . . . . . . . . . . . . . . . . . . 24
Type FDP20NN . . . . . . . . . . . . . . . . . . . . . . . 25
Type FDP20AN . . . . . . . . . . . . . . . . . . . . . . . 26
Type FDP50NN, 55NN . . . . . . . . . . . . . . . . . . . 27
Type FDP50AA, 55AA . . . . . . . . . . . . . . . . . . . . 28
Type FDP55GG, 55HH . . . . . . . . . . . . . . . . . . . 29
Series FD
Available Designs . . . . . . . . . . . . . . . . . . . . . . 30
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . 31
Type FD - N10 . . . . . . . . . . . . . . . . . . . . . . . 32
Type FD - A10 . . . . . . . . . . . . . . . . . . . . . . . 33
Type FD - M10 . . . . . . . . . . . . . . . . . . . . . . . 34
Type FD - N20 . . . . . . . . . . . . . . . . . . . . . . . 35
Type FD - N50, N55 . . . . . . . . . . . . . . . . . . . . 36
Type FD - A50, A55. . . . . . . . . . . . . . . . . . . . . 37
Type FD - M20 . . . . . . . . . . . . . . . . . . . . . . . 38
Type FDC -10 . . . . . . . . . . . . . . . . . . . . . . . 39
Type FD - A51, A52 . . . . . . . . . . . . . . . . . . 40 & 41
Engineering Data
Coupling Application Data Sheet . . . . . . . .
Recommended Commercial Keys . . . . . . . .
Shaft Diameters & Ratings for Electric Motors . . .
Maximum Bores Types FDG/FDP - N & A Hubs. .
Maximum Bores Types FDG/FDP - C, D & L Hubs
Torsional Stiffness Types FDG/FDP . . . . . . . .
Puller Bolt Holes Types FDG/FDP . . . . . . . .
Misalignment Capacities Types FDG/FDP . . . .
Taper-Lock Bushings Types FDG/FDP . . . . . .
Maximum Bores Type FD - N & A Hubs . . . . .
Bushing Selections Type FD . . . . . . . . . . .
Torsional Stiffness Type FD. . . . . . . . . . . .
Taper & Counterbore Limitations Type FD . . . .
Puller Bolt Holes Type FD . . . . . . . . . . . .
Misalignment Capacities Type FD . . . . . . . .
Recommended Bores (Inches) . . . . . . . . . .
Floating Shaft Balancing . . . . . . . . . . . .
Recommended Bore (Millimeters). . . . . . . . .
Custom Design Couplings. . . . . . . . . . . .
Headquarters & Global Sales Offices . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . 42
. . . 43
. . . 43
. . . 44
. . . 45
. . . 46
. . . 46
. . . 46
. . . 47
. . . 48
. . . 49
. . . 49
. . . 50
. . . 50
. . . 50
. . . 51
. . . 51
52 & 53
. . . 54
. . . 55
Omnibox, Ultramite, Fluid Couplings, Renew and spare parts. Warranty applies
to Steelflex and Lifelign couplings with the use of Falk Long Term grease.
Copyright 2002, 2004 The Falk Corporation. All Rights Reserved. Litho in U.S.A.
FALK, A-PLUS, FREEDOM, LIFELIGN, OMNIBOX, RAM, RENEW, STEELFLEX,
ULTRAMITE, and a good name in industry are registered trademarks. Taper-Lock is
a registered trademark of a bushing under license. Viton is a registered trademark of
the DuPont Do.
The contents of this selection guide are subject to change without notice or obligation.
Information contained herein should be confirmed before placing orders.
The Falk Corporation, 2002, 2004.
(471-710) 5
FDG/FDP30NN
ADDITIONAL DESIGNS: Consult Falk for electrically insulated, flange or flywheel mounting, disc brake, shear pin, shaft-hub locking
devices, composite shafting, stainless steel, etc. See Pages 52 & 53 for custom designs.
6 (471-710)
How to Select
Standard Selection Method
Hp x 63,000
rpm
75hp x 63,000
= 2,700 lb - in
1,750 rpm
(471-710) 7
Actual HP
3/4
1 1/2
7 1/2
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
1.00
1.25
1.50
1.75
2.00
2.50
3.00
3.50
.75
.94
1.1
1.3
1.5
1.9
2.3
2.6
1.0
1.25
1.5
1.8
2.0
2.5
3.0
3.5
1.5
1.9
2.3
2.6
3.0
3.8
4.5
5.3
2.0
2.5
3.0
3.5
4.0
5.0
6.0
7.0
3.0
3.8
4.5
5.3
6.0
7.5
9.0
10.5
5.0
6.3
7.5
8.8
10.0
12.5
15.0
17.5
7.5
9.4
11.3
13.1
15.0
18.8
22.5
26.2
10
12.5
15
18
20
25
30
35
15
19
23
26
30
38
45
52
20
25
30
35
40
50
60
70
25
31
38
44
50
63
75
87
30
38
45
53
60
75
90
105
40
50
60
70
80
100
120
140
50
63
75
88
100
125
150
175
60
75
90
105
120
150
180
210
75
94
113
131
150
187
225
262
100
125
150
175
200
250
300
350
125
156
188
219
250
312
375
437
150
188
225
262
300
375
450
525
200
250
300
350
400
500
600
700
250
312
375
438
500
625
750
875
350
400
450
500
20
30
40
50
60
70
80
90
100
110
1.125
1.625
2.250
7900
9925
840
1.33
1.625
2.000
2.750
6800
8560
1550
2.46
1.875
2.250
3.375
5500
7100
2740
4.35
2.250
2.750
4.125
4700
5900
5090
8.08
2.625
3.250
4.625
4200
5250
7740
12.28
3.000
3.625
5.250
3600
4500
12,390
19.7
3.500
3.500
6.000
3200
4000
13,000
20.6
4.000
4.000
6.750
2850
3600
23,000
36.5
4.500
4.500
7.250
2650
3300
33,600
53.3
5.000
5.000
8.250
2300
2900
44000
70
743
619
516
433
371
361
299
241
206
179
149
134
120
107
86.6
72.2
57.8
47.4
39.2
32.0
25.8
20.6
17.3
14.0
11.6
9.28
7.63
6.19
5.16
4.13
3.40
2.78
2.27
1.86
1.55
1.03
1310
1090
912
766
657
639
529
427
365
317
263
237
212
190
153
128
102
83.9
69.3
56.6
45.6
36.5
30.7
24.8
20.4
16.4
13.5
10.9
9.12
7.30
6.02
4.93
4.01
3.28
2.74
1.82
1600
1330
1120
960
933
773
624
533
464
384
347
309
277
224
187
149
123
101
82.6
66.6
53.3
44.8
36.3
29.9
24.0
19.7
16.0
13.3
10.7
8.8
7.20
5.86
4.80
4.00
2.67
1750
1470
1260
1220
1010
817
698
607
503
454
405
363
293
244
195
161
133
108
87.3
69.8
58.6
47.5
39.1
31.4
25.8
20.9
17.5
14.0
11.5
9.42
7.68
6.28
5.24
3.49
RPM
4500
3600
3000
2500
2100
1800
1750
1450
1170
1000
870
720
650
580
520
420
350
280
230
190
155
125
100
84
68
56
45
37
30
25
20
16.5
13.5
11
9
7.5
5
HP Ratings
60.0
48.0
40.0
33.3
28.0
24.0
23.3
19.3
15.6
13.3
11.6
9.60
8.66
7.73
6.93
5.60
4.66
3.73
3.07
2.53
2.07
1.67
1.33
1.12
0.906
0.746
0.600
0.493
0.400
0.333
0.267
0.220
0.180
0.147
0.120
...
0.067
110.7
88.5
73.8
61.5
51.6
44.3
43.0
35.7
28.8
24.6
21.4
17.7
16.0
14.3
12.8
10.3
8.61
6.89
5.66
4.67
3.81
3.07
2.46
2.07
1.67
1.38
1.11
0.910
0.738
0.615
0.492
0.406
0.332
0.271
0.221
0.184
0.123
196
157
130
109
91.3
78.3
76.1
63.0
50.9
43.5
37.8
31.3
28.3
25.2
22.6
18.3
15.2
12.2
10.0
8.26
6.74
5.43
4.35
3.65
2.96
2.43
1.96
1.61
1.30
1.09
0.869
0.717
0.587
0.478
0.391
0.326
0.217
363
291
242
202
170
145
141
117
94.5
80.8
70.3
58.1
52.5
46.8
42.0
33.9
28.3
22.6
18.6
15.3
12.5
10.1
8.08
6.78
5.49
4.52
3.63
2.99
2.42
2.02
1.62
1.33
1.09
0.888
0.727
0.606
0.404
553
442
368
307
258
221
215
178
144
123
107
88.4
79.8
71.2
63.9
51.6
43.0
34.4
28.2
23.3
19.0
15.4
12.3
10.3
8.35
6.88
5.53
4.54
3.68
3.07
2.46
2.03
1.66
1.35
1.11
0.921
0.614
885
708
590
491
413
354
344
285
230
197
171
142
128
114
102
82.6
68.8
55.0
45.2
37.4
30.5
24.6
19.7
16.5
13.4
11.0
8.85
7.27
5.90
4.91
3.93
3.24
2.65
2.16
1.77
1.47
0.983
20
30
40
50
60
70
85
95
105
115
125
1.125
1.625
1.625
2.250
7900
11000
1285
2.04
1.625
2.000
2.000
2.750
6800
10000
2200
3.49
1.875
2.250
2.250
3.375
5500
9300
4960
7.87
2.250
2.750
2.750
4.125
4700
8500
8850
14.0
2.625
3.250
3.250
4.625
4200
7600
14700
23.3
3.000
3.625
3.625
5.250
3600
6900
23,000
36.5
3.500
4.250
5.000
6.250
3100
6300
44,250
70.2
4.000
4.625
5.250
6.750
2850
6000
61,950
98.3
4.500
5.250
6.000
7.500
2550
5500
84,520
134
5.000
5.875
6.500
8.500
2300
5100
110,200
175
6.000
6.875
7.500
9.500
2000
4900
153300
243
91.7
73.4
61.2
51.0
42.8
36.7
35.7
29.6
23.9
20.4
17.7
14.7
13.3
11.8
10.6
8.56
7.14
5.71
4.69
3.87
3.16
2.55
2.04
1.71
1.39
1.14
0.917
0.754
0.612
0.510
0.408
0.336
0.275
0.224
0.183
...
0.102
157
126
105
87.3
73.3
62.8
61.1
50.6
40.8
34.9
30.4
25.1
22.7
20.2
18.2
14.7
12.2
9.77
8.03
6.63
5.41
4.36
3.49
2.93
2.37
1.95
1.57
1.29
1.05
0.873
0.698
0.576
0.471
0.384
0.314
0.262
0.175
354
283
236
197
165
142
138
114
92.1
78.7
68.5
56.7
51.2
45.6
40.9
33.1
27.5
22.0
18.1
15.0
12.2
9.84
7.87
6.61
5.35
4.41
3.54
2.91
2.36
1.97
1.57
1.30
1.06
0.866
0.708
0.590
0.393
632
506
421
351
295
253
246
204
164
140
122
101
91.3
81.4
73.0
59.0
49.1
39.3
32.3
26.7
21.8
17.6
14.0
11.8
9.55
7.86
6.32
5.20
4.21
3.51
2.81
2.32
1.90
1.54
1.26
1.05
0.702
1050
840
700
583
490
420
408
338
273
233
203
168
152
135
121
98.0
81.6
65.3
53.6
44.3
36.2
29.2
23.3
19.6
15.9
13.1
10.5
8.63
7.00
5.83
4.66
3.85
3.15
2.57
2.10
1.75
1.17
3160
2530
2110
1760
1470
1260
1230
1020
821
702
611
506
456
407
365
295
246
197
161
133
109
87.8
70.2
59.0
47.7
39.3
31.6
26.0
21.1
17.6
14.0
11.6
9.48
7.72
6.32
5.27
3.51
4420
3540
2950
2460
2060
1770
1720
1430
1150
983
855
708
639
570
511
413
344
275
226
187
152
123
98.3
82.6
66.8
55.0
44.2
36.4
29.5
24.6
19.7
16.2
13.3
10.8
8.85
7.37
4.91
6030
4830
4020
3350
2820
2410
2350
1940
1570
1340
1170
966
872
778
697
563
469
375
308
255
208
168
134
113
91.2
75.1
60.3
49.6
40.2
33.5
26.8
22.1
18.1
14.8
12.1
10.1
6.71
7870
6290
5250
4370
3670
3150
3060
2540
2050
1750
1520
1260
1140
1010
909
734
612
490
402
332
271
219
175
147
119
97.9
78.7
64.7
52.5
43.7
35.0
28.9
23.6
19.2
15.7
13.1
8.74
10900
8760
7300
6080
5110
4380
4260
3530
2850
2430
2120
1750
1580
1410
1260
1020
851
681
559
462
377
304
243
204
165
136
109
90.0
73.0
60.8
48.6
40.1
32.8
26.8
21.9
18.2
12.2
RPM
4500
3600
3000
2500
2100
1800
1750
1450
1170
1000
870
720
650
580
520
420
350
280
230
190
155
125
100
84
68
56
45
37
30
25
20
16.5
13.5
11
9
7.5
5
HP Ratings
1640
1310
1090
912
766
657
639
529
427
365
317
263
237
212
190
153
128
102
83.9
69.3
56.6
45.6
36.5
30.7
24.8
20.4
16.4
13.5
10.9
9.12
7.30
6.02
4.93
4.01
3.28
2.74
1.82
(471-710) 9
Service Factors
TABLE 4 Disc Coupling Service Factors for Motor and Turbine Drives
Service factors listed are typical values based on normal operation of the drive systems.
Service
Factor
Service
Factor
Service
Factor
Service
Factor
AERATOR...........................................2.0
AGITATORS
Vertical and Horizontal
Screw, Propeller, Paddle.................1.0
BARGE HAUL PULLER .......................1.5
BLOWERS
Centrifugal .......................................1.0
Lobe or Vane....................................1.25
CAR DUMPERS ..................................2.5
CAR PULLERS ....................................1.5
CLARIFIER OR CLASSIFIER................1.0
COMPRESSORS
Centrifugal .......................................1.0
Rotary, Lobe or Vane.........................1.25
Rotary, Screw....................................1.0
Reciprocating
Direct Connected ...................Refer to Falk
Without Flywheel ....................Refer to Falk
QWith Flywheel and Gear
between Compressor
and Prime Mover
1 cylinder, single acting ..............3.0
1 cylinder, double acting ............3.0
2 cylinders, single acting.............3.0
2 cylinders, double acting...........3.0
3 cylinders, single acting.............3.0
3 cylinders, double acting...........2.0
4 or more cly., single act. ...........1.75
4 or more cyl., double act. .........1.75
sCONVEYORS
Apron, Assembly, Belt, Chain,
Flight, Screw .................................1.0
Bucket..............................................1.25
Live Roll, Shaker and
Reciprocating ................................3.0
sHCRANES AND HOIST
Main Hoist ....................................1.75s
Skip Hoist......................................1.75s
Slope ...............................................1.5
Bridge, Travel or Trolley.....................1.75
DYNAMOMETER ...............................1.0
ELEVATORS
Bucket, Centrifugal Discharge ............1.25
Freight or Passenger .........Not Approved
Gravity Discharge .............................1.25
ESCALATORS ................... Not Approved
EXCITER, GENERATOR...................... 1.0
EXTRUDER, PLASTIC ......................... 1.5
FANS
Centrifugal .......................................1.0
Cooling Tower..................................2.0
Forced Draft Across the
Line start.......................................1.5
Forced Draft Motor
Driven thru fluid or
electric slip clutch ..........................1.0
Gas Recirculating..............................1.5
Induced Draft with damper
control or blade cleaner.................1.25
Induced Draft without controls............2.0
FEEDERS
Apron, Belt, Disc, Screw.....................1.0
Reciprocating ...................................2.5
GENERATORS
Even Load ........................................1.0
Hoist or Railway Service.....................1.5
Welder Load.....................................2.0
HAMMERMILL ...................................1.75
LAUNDRY WASHER OR
TUMBLER........................................2.0
LINE SHAFTS
Any Processing Machinery..................1.5
MACHINE TOOLS
Auxiliary and Traverse Drive ...............1.0
Bending Roll, Notching Press,
Punch Press, Planer, Plate
Reversing ......................................1.75
Main Drive .......................................1.5
MAN LIFTS ....................... Not Approved
METAL FORMING MACHINES
Draw Bench Carriage and
Main Drive....................................2.0
Extruder ...........................................2.0
Farming Machine and
Forming Mills ................................2.0
Slitters ..............................................1.0
Wire Drawing or Flattening ................1.75
Wire Winder .....................................1.5
Coilers and Uncoilers ........................1.5
MIXERS (see Agitators)
Concrete ..........................................1.75
Muller ..............................................1.5
PRESS, PRINTING.............................. 1.5
PUG MILL ..........................................1.75
PULVERIZERS
Hammermill and Hog........................1.75
Roller ...............................................1.5
PUMPS
Boiler Feed.......................................1.5
Centrifugal
Constant Speed.............................1.0
Frequent Speed Changes
under Load................................1.25
Descaling, with accumulators.............1.25
Gear, Rotary, or Vane .......................1.25
Reciprocating
1 cyl., single or double act. ............3.0
2 cyl., single acting........................2.0
2 cyl., double acting ......................1.75
3 or more cylinders........................1.5
SCREENS
Air Washing......................................1.0
Grizzly..............................................2.0
Rotary Coal or Sand..........................1.5
Vibrating ..........................................2.5
Water ..............................................1.0
SKI TOWS & LIFTS ............Not Approved
STEERING GEAR ...............................1.0
STOKER .............................................1.0
TUMBLING BARREL........................... 1.75
WINCH, MANEUVERING
Dredge, Marine ................................1.5
WINDLASS ........................................1.5
WOODWORKING
MACHINERY ..................................1.0
WORK LIFT PLATFORMS...Not Approved
AGGREGATE PROCESSING,
CEMENT, MINING KILNS;
TUBE, ROD AND MALL MILLS
Direct or on L.S. shaft of
Reducer, with final drive
Machined Spur Gears....................2.0
Single Helical or
Herringbone Gears ....................1.75
Conveyors, Feeders, Screens,
Elevators ..................See General Listing
Crushers, Ore or Stone .....................2.5
Dryer, Rotary ....................................1.75
Grizzly..............................................2.0
Hammermill or Hog ..........................1.75
Tumbling Mill or Barrel......................1.75
BREWING AND DISTILLING
Bottle and Can
Filling Machines ............................1.0
Brew Kettle .......................................1.0
Cookers, Continuous Duty .................1.25
Lauter Tub ........................................1.5
Mash Tub.........................................1.25
Scale Hopper, Frequent Peaks............1.75
CLAY WORKING INDUSTRY
Brick Press, Briquette Machine,
Clay Working Machine,
Pug Mill........................................1.75
DREDGES
Cable Reel .......................................1.75
Conveyors ........................................1.25
Cutter head, Jig Drive .......................2.0
Maneuvering Winch ..........................1.5
Pumps (uniform load) ........................1.5
Screen Drive, Stacker ........................1.75
Utility Winch .....................................1.5
FOOD INDUSTRY
Beet Slicer ........................................1.75
Bottling, Can Filling Machine .............1.0
Cereal Cooker..................................1.25
Dough Mixer, Meat Grinder...............1.75
LUMBER
Band Resaw......................................1.5
Circular Resaw, Cut-off .....................1.75
Edger, Head Rig, Hog .......................2.0
Gang Saw
(Reciprocating).................Refer to Falk
Log Haul ..........................................2.0
Planer ..............................................1.75
Rolls, Non-Reversing .........................1.25
Rolls, Reversing.................................2.0
Sawdust Conveyor ............................1.25
Slab Conveyor ..................................1.75
Sorting Table ....................................1.5
Trimmer ...........................................1.75
HMETAL ROLLING MILLS
Coilers (Up or Down) Cold
Mills only ......................................1.5
Coilers (Up or Down) Hot
Mills only ......................................2.0
Coke Plants
Pusher Ram Drive ..........................2.5
Door Opener ................................2.0
Pusher or Larry Car
Traction Drive ............................3.0
Cold Mills
Strip Mills............................Refer to Falk
Temper Mills .......................Refer to Falk
Cooling Beds....................................1.5
Drawbench.......................................2.0
Feed Rolls - Blooming Mills................3.0
Furnace Pushers................................2.0
Hot and Cold Saws ...........................2.0
Hot Mills
Strip or Sheet Mills ...........Refer to Falk
Reversing Blooming..........Refer to Falk
or Slabbing Mills ..............Refer to Falk
Edger Drives ....................Refer to Falk
Ingot Cars ........................................2.0
Manipulators ....................................3.0
Merchant Mills .......................Refer to Falk
Mill Tables
Roughing Breakdown
Mills .........................................3.0
Hot Bed or Transfer,
non-reversing ............................1.5
.
Runout, reversing...........................3.0
Runout, non-reversing,
non-plugging.............................2.0
Reel Drives .......................................1.75
Rod Mills ...............................Refer to Falk
Screwdown .......................................2.0
Seamless Tube Mills
Piercer..........................................3.0
Thrust Block ..................................2.0
1.0
2.0
1.25
2.25
4 or 5
1.5 1.75
2.5 2.75
2.0
3.0
1.0
1.5
6 or more
1.25 1.5 1.75
1.75 2.0 2.25
2.0
2.5
t To use Table 5, first determine application service factor from Table 4. Use that
factor to determine ENGINE Service Factor from Table 5. When service factor from
Table 4 is greater than 2.0 or where 1, 2 or 3 cylinder engines are involved, refer
complete application details to Falk Engineering.
10 (471-710)
Typical
Service
Factor
1.0
1.5
3. Speed (RPM)
4. Quantity
2.0
2.5
How to Order
3.0
Consult
Falk
Engineering
5. Coupling Size and Type e.g., Size 40FDG, Type 30, Hubs NN
6. Gap or distance between shaft ends (BE Dimension)
7. Bore Sizes: Unless otherwise specified, disc coupling hubs will
be bored per Table 25, Page 51 as follows:
FDG/FDP20, 30, 31, 50, 55 Type Interference fit without
setscrew
FDG10, 11, 12 Type Clearance fit with setscrew
FDP10, 11, 12 Type Interference fit without setscrew
8. Shaft Dimensions as follows:
For Straight Shafts:
Driving Diameter U
Shaft
Length V
Keyway
Driven Diameter U
Shaft Length V
Keyway
Across Flats
Corners ZW
Taper per Foot
Keyway
Y
V
IF MACHINES ARE
IN PLACE FURNISH
GAP DIMENSION.
ZW
GAP
TAPER PER LENGTH
ON DIAMETER
(471-710) 11
FDG
SIZE
20
Thru
110
PRODUCT
CLASSIFICATION
Freedom Disc
General
12 (471-710)
10
COUPLING
TYPE
10 = Close Coupled
11 = Close Coupled,
One hub reversed
12 = Close Coupled
Two hubs reversed
20 = Single Flexing.
This type must always
contain one N nonadapter type hub in the
hub description block
30 = Spacer - Non Adapter Style
31 = Spacer - Adapter Style
50 = Floating Shaft - Solid
55 = Floating Shaft - Tubular
CC
FEATURE
MODEL
B = Balanced A, B etc.
P = Electrically
Insulated
V = Vertical
S = Special
Type FDG10CC,
Dimensions Inches
GAP
C
GAP
GAP
B
B
FDG10
Standard Hub Configuration
FDG11
One Hub Reversed
FDG12
Two Hubs Reversed
Sizes 80-110
H
GAP
C
20
30
40
50
60
70
80
90
100
110
7900
6800
5500
4700
4200
3600
3200
2850
2650
2300
GAP
FDG11
One Hub Reversed
Torque Allowable
Cplg Wt Cplg WR2
Max w/o Bore w/o Bore
Rating Speed
l
Bore
(lb)
(lb-in2)
(lb-in)
rpm
840
1550
2740
5090
7740
12390
13000
23000
33800
44000
FDG10
Standard Hub Configuration
GAP
C
SIZE
1.125
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
5.97
9.52
17.3
29.5
49.6
74.6
95.6
130
170
232
7.29
14.9
44.3
96.1
214
457
765
1310
2000
3610
FDG12
Two Hubs Reversed
B
A
3.46
4.02
4.84
5.79
6.54
7.56
8.58
9.61
10.31
11.89
Gap
4.90
5.08
6.10
7.40
9.17
10.37
11.28
12.42
13.52
14.33
5.87
6.10
7.28
8.86
10.98
12.56
14.53
16.02
17.36
18.43
H Dimensions are for reference only and are subject to change without notice unless certified.
1.91
1.97
2.40
2.91
3.62
4.04
3.96
4.31
4.74
5.00
1.57
2.32
2.76
3.23
3.82
4.41
5.04
5.75
6.38
6.93
0.26
0.26
0.28
0.35
0.39
0.51
0.61
0.61
0.61
0.75
...
...
...
...
...
...
0.669
0.709
0.866
0.984
Axial
DeflecFDG10 FDG11 FDG12 tion n
+/
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.20
0.20
0.24
1.08
1.14
1.30
1.57
1.93
2.30
3.37
3.80
4.04
4.33
2.05
2.17
2.48
3.03
3.74
4.49
6.61
7.40
7.87
8.43
0.071
0.047
0.055
0.063
0.079
0.094
0.102
0.118
0.134
0.150
SIZE
H
20
30
40
50
60
70
80
90
100
110
Standard couplings are manufactured to AGMA 9000 balance class 8. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with clearance fits per AGMA 9002 class 1 with one setscrew over the keyway unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
(471-710) 13
Type FDG10DD,
Dimensions Inches
GAP
GAP
GAP
FDG10
Standard Hub Configuration
FDG11
One Hub Reversed
FDG12
Two Hubs Reversed
Sizes 80-110
H
20
30
40
50
60
70
80
90
100
110
GAP
FDG10
Standard Hub Configuration
FDG11
One Hub Reversed
Torque Allowable
Cplg Wt
Max w/o Bore
Rating Speed
l
Bore
(lb)
(lb-in)
rpm
7900
6800
5500
4700
4200
3600
3200
2850
2650
2300
GAP
B
B
840
1550
2740
5090
7740
12390
13000
23000
33800
44000
SIZE
GAP
1.125
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
5.40
8.06
15.2
26.0
43.5
65.6
87.9
119
154
212
Cplg WR2
w/o Bore
(lb-in2)
7.22
13.5
42.3
92.2
202
413
741
1270
2000
3500
FDG12
Two Hubs Reversed
B
A
3.46
4.02
4.84
5.79
6.54
7.56
8.58
9.61
10.31
11.89
Gap
4.62
4.67
5.69
6.99
8.64
9.78
10.59
11.63
12.66
13.39
5.30
5.28
6.46
8.03
9.91
11.37
13.15
14.45
15.63
16.54
H Dimensions are for reference only and are subject to change without notice unless certified.
1.63
1.56
1.99
2.50
3.09
3.44
3.27
3.52
3.88
4.06
1.57
2.32
2.76
3.23
3.82
4.41
5.04
5.75
6.38
6.93
0.26
0.26
0.28
0.35
0.39
0.51
0.61
0.61
0.61
0.75
...
...
...
...
...
...
0.669
0.709
0.866
0.984
Axial
DeflecFDG10 FDG11 FDG12 tion n
+/
0.69
0.94
0.94
0.94
1.19
1.31
1.50
1.77
1.93
2.13
1.37
1.55
1.71
1.99
2.46
2.90
4.06
4.59
4.90
5.28
2.05
2.17
2.48
3.03
3.74
4.49
6.61
7.40
7.87
8.43
0.071
0.047
0.055
0.063
0.079
0.094
0.102
0.118
0.134
0.150
SIZE
H
20
30
40
50
60
70
80
90
100
110
Standard couplings are manufactured to AGMA 9000ance class 8. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with clearance fits per AGMA 9002 class 1 with one setscrew over the keyway unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
14 (471-710)
Type FDG30NN
Dimensions Inches
N-HUB
N-HUB
A D
SIZE
H
20
30
40
50
60
70
80
90
100
110
Torque
Rating
(lb-in)
Allowable
Speed
rpm
Max
Bore l
N-Hub
Min
BE
Max
BE
840
1550
2740
5090
7740
12390
13000
23000
33600
44000
9925
8560
7100
5900
5250
4500
4000
3600
3300
2900
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
2.97
2.95
3.39
3.78
4.37
5.35
5.51
5.51
5.91
5.91
13.2
13.2
13.4
13.6
14.2
14.4
14.4
14.4
14.6
14.6
BE
Cplg Wt t
w/o Bore
(lb)
Basic
Cplg
6.43
8.81
14.5
23.1
39.2
64.0
77.1
105
145
192
lb per
in of BE
0.426
0.808
0.989
1.54
1.85
2.64
2.64
2.64
3.13
3.13
Cplg WR2 Q
with no Bore
(lb-in2)
Basic
Cplg
7.43
11.7
34.0
71.7
169
350
540
890
1460
2520
H Dimensions are for reference only and are subject to change without notice unless certified.
WR per
in of BE
0.175
0.796
1.43
3.07
4.95
9.82
9.82
9.82
16.3
16.3
3.46
4.02
4.84
5.79
6.54
7.56
8.58
9.61
10.31
11.89
C
Std
N-Hub
Long
N-Hub
1.77
1.77
1.97
2.36
2.76
3.74
3.96
4.31
4.74
5.00
3.15
3.15
3.54
3.94
4.33
5.31
5.53
5.89
6.32
6.57
Axial
Deflection n
+/
SIZE
2.30
2.74
3.23
3.84
4.45
5.20
5.04
5.75
6.38
6.93
0.071
0.047
0.055
0.063
0.079
0.094
0.102
0.118
0.134
0.150
20
30
40
50
60
70
80
90
100
110
Standard couplings are manufactured to AGMA 9000 balance class 9. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
t To obtain total weight: Basic Coupling + BE times lbs. per inch of BE.
2
2
Q To obtain total WR : Basic Coupling + BE times WR per inch of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA
standards MG1-14.37, 1-20.81 and 1-21.81.
Standard BE Spacers
CPLG
SIZE
3.50
5.00
7.00
20
30
40
50
60
70
80
90
100
110
x
x
x
...
...
...
...
...
...
...
x
x
x
x
x
...
...
...
...
...
x
x
x
x
x
x
x
x
(471-710) 15
Type FDG31AA,
Dimensions Inches
LL, & AL
M
L-HUB
A-HUB
A-HUB
ANTI-FLY
ADAPTER
(SIZES 20-70)
L-HUB
STANDARD
ADAPTER
(SIZES 80-110)
L-HUB
A-HUB
BE
SIZE
H
20
30
40
50
60
70
80
90
100
110
Torque Allowable
Rating
Speed
(lb-in)
rpm
840
1550
2740
5090
7740
12390
13000
23000
33600
44000
9925
8560
7100
5900
5250
4500
4000
3600
3300
2900
Max
Max
Bore l Bore l
Std
Large
A-Hub L-Hub
Min
BE
Max
BE
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
2.73
2.72
3.43
3.74
4.84
5.67
5.91
5.91
6.89
6.89
13.58
13.58
13.98
14.17
14.76
15.16
15.16
15.16
15.75
15.75
2.250
2.750
3.375
4.125
4.625
5.250
6.000
6.750
7.250
8.250
Cplg Wt t
w/o Bore
(lb)
Basic
Cplg
7.75
10.4
17.9
29.4
47.6
77.3
87.8
119
165
225
Cplg WR2 Q
w/o Bore
(lb-in2)
lb per
in of BE
Basic
Cplg
0.426
0.808
0.989
1.54
1.85
2.64
2.64
2.64
3.13
3.13
10.3
18.5
47.6
112
235
484
709
1150
1930
3510
H Dimensions are for reference only and are subject to change without notice unless certified.
WR2 per
in of BE
0.175
0.796
1.43
3.07
4.95
9.82
9.82
9.82
16.3
16.3
3.46
4.02
4.84
5.79
6.54
7.56
8.58
9.61
10.31
11.89
C
Std
A-Hub
Large
L-Hub
1.77
1.77
1.97
2.36
2.76
3.74
3.94
4.33
4.76
5.00
1.73
2.13
2.28
2.95
3.58
3.94
4.21
4.57
4.76
5.79
Axial
Deflection n
+/
SIZE
2.30
2.74
3.23
3.84
4.45
5.20
5.04
5.75
6.38
6.93
0.59
0.59
0.79
0.79
1.18
1.18
1.38
1.38
1.57
1.97
0.071
0.047
0.055
0.063
0.079
0.094
0.102
0.118
0.134
0.150
20
30
40
50
60
70
80
90
100
110
Standard couplings are manufactured to AGMA 9000 balance class 9. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
t To obtain total weight: Basic Coupling + BE times lbs. per in. of BE.
2
2
Q To obtain total WR : Basic Coupling + BE times WR per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA
standards MG1-14.37, 1-20.81 and 1-21.81.
Standard BE Spacers
CPLG
SIZE
3.50
5.00
7.00
8.00
20
30
40
50
60
70
80
90
100
110
x
x
x
...
...
...
...
...
...
...
x
x
x
x
x
...
...
...
...
...
x
x
x
x
x
x
x
...
16 (471-710)
Type FDG20NN
N-HUB
N-HUB
GAP
SIZE
Torque
Rating
(lb-in)
Allowable
Speed
rpm
Max
Bore l
Std
N-Hub
20
30
40
50
60
70
80
90
100
110
840
1550
2740
5090
7740
12390
13000
23000
33600
44000
5800
5600
4600
3900
3500
3000
2700
2400
2200
1900
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
Cplg Wt
w/o Bore
(lb)
Cplg WR2
w/o Bore
(lb-in2)
5.19
7.28
11.4
18.8
31.1
53.1
60.4
82.2
112
145
5.08
7.39
22.2
46.5
113
240
337
562
924
1540
C
A
Std
N-Hub
3.46
4.02
4.84
5.79
6.54
7.56
8.58
9.61
10.31
11.89
1.77
1.77
1.97
2.36
2.76
3.74
3.96
4.31
4.74
5.00
H Dimensions are for reference only and are subject to change without notice unless certified.
Long
N-Hub
Axial
Deflection n
+/
Gap
SIZE
3.15
3.15
3.54
3.94
4.33
5.31
5.53
5.89
6.32
6.57
2.36
2.76
3.23
3.94
4.53
5.20
5.04
5.75
6.38
6.93
0.035
0.024
0.028
0.031
0.039
0.047
0.051
0.059
0.067
0.075
0.264
0.256
0.276
0.354
0.394
0.512
0.610
0.610
0.610
0.748
20
30
40
50
60
70
80
90
100
110
Standard couplings are manufactured to AGMA 9000 balance class 7. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
(471-710) 17
Type FDG20AN
A HUB
N HUB
A
GAP
SIZE
H
20
30
40
50
60
70
80
90
100
110
Torque Allowable
Rating Speed
(lb-in)
rpm
840
1550
2740
5090
7740
12390
13000
23000
33600
44000
5800
5600
4600
3900
3500
3000
2700
2400
2200
1900
Max Bore l
N Hub
A Hub
Cplg Wt
w/o Bore
(lb)
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
5.91
8.16
13.2
22.4
36.1
60.4
68.0
91.4
126
165
Cplg WR2
w/o Bore
(lb-in2)
6.55
10.7
30.7
65.2
147
311
429
701
1180
2050
Std
N Hub
Std
A Hub
Long
N-Hub
Long
A-Hub
N Hub
A Hub
3.46
4.02
4.84
5.79
6.54
7.56
8.58
9.61
10.31
11.89
1.77
1.77
1.97
2.36
2.76
3.74
3.96
4.31
4.74
5.00
1.77
1.77
1.97
2.36
2.76
3.74
3.96
4.31
4.74
5.00
3.15
3.15
3.54
3.94
4.33
5.31
5.53
5.89
6.32
6.57
3.15
3.15
3.54
3.94
4.33
5.31
5.53
5.89
6.32
6.57
2.36
2.76
3.23
3.94
4.53
5.20
5.04
5.75
6.38
6.93
2.36
2.76
3.23
3.94
4.53
5.20
5.04
5.75
6.38
6.93
H Dimensions are for reference only and are subject to change without notice unless certified.
Axial
Deflection n
+/
Gap
SIZE
0.035
0.024
0.028
0.031
0.039
0.047
0.051
0.059
0.067
0.075
0.618
0.610
0.748
0.906
1.063
1.260
1.437
1.437
1.614
1.949
20
30
40
50
60
70
80
90
100
110
Standard couplings are manufactured to AGMA 9000 balance class 7. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
18 (471-710)
Type FDG50NN,
55NN
GAP
SIZE
N-HUB
AD
N-HUB
SD
BE
Type N50
GAP
GAP
N-HUB
OD
SIZE
H
N-HUB
Type
of
Shaft
Floating Shafts
Max BE for Various rpms Q
1800
1500
1200
900
750
600
540 &
Less
20
Solid
Tube
48
60
52
67
58
74
68
86
74
94
83
105
87
111
30
Solid
Tube
52
75
57
82
64
91
74
105
81
115
91
129
96
136
40
Solid
Tube
58
82
64
90
72
100
83
116
91
127
102
142
107
150
50
Solid
Tube
60
90
66
99
74
110
86
128
94
140
105
156
111
165
60
Solid
Tube
68
93
74
102
83
114
96
131
105
144
117
161
124
170
70
Solid
Tube
74
106
81
116
91
130
105
150
115
164
129
183
136
193
Q Interpolate for intermediate speeds. Max. BE is based on 70% of the lateral critical
BE
Type N55
Torque Maxl
Rating Bore
Std
(lb-in) N-Hub
Type
of
Shaft
Min
BE
WR2 (lb-in2)
Weight (lb) s
Basic Cplg
w/No Bore
8.98
7.23
lb
per in
of BE
Basic Cplg
w/No Bore
0.34
0.11
9.88
7.90
Axial n
Deflection
+/
0.07
0.06
0.071
3.46
1.77
WR
per in
of BE
Floating Shaft
D
Gap
3.15
2.30
Std
Long
N-Hub N-Hub
SIZE
H
OD
SD
0.264
...
1.500
1.250
...
20
20
840
1.625
Solid
Tube
4.094
13.189
30
1550
2.000
Solid
Tube
4.094
13.189
12.5
10.7
0.50
0.22
14.2
14.3
0.14
0.26
0.047
4.02
1.77
3.15
2.74
0.256
...
2.250
1.500
...
30
40
2740
2.250
Solid
Tube
4.488
13.386
19.3
17.3
0.78
0.34
42.8
39.5
0.34
0.61
0.055
4.84
1.97
3.54
3.23
0.276
...
2.750
1.875
...
40
50
5090
2.750
Solid
Tube
5.433
13.583
32.7
28.0
0.90
0.67
90.7
85.6
0.44
1.70
0.063
5.79
2.36
3.94
3.84
0.354
...
3.375
2.000
...
50
60
7740
3.250
Solid
Tube
6.299
14.173
53.4
45.6
1.40
0.56
218
190
1.09
1.52
0.079
6.54
2.76
4.33
4.45
0.394
...
3.500
2.500
...
60
70
12390
3.625
Solid
Tube
8.504
14.370
89.2
75.6
2.02
0.73
461
404
2.24
3.34
0.094
7.56
3.74
5.31
5.20
0.512
...
4.500
3.000
...
70
H Dimensions are for reference only and are subject to change without notice unless certified.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
s
To obtain total weight: Basic Coupling + BE times Lbs. per in. of BE.
To obtain total WR2: Basic Coupling + BE times WR2 per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
(471-710) 19
Type FDG50AA,
55AA
GAP
SIZE
A-HUB
A-HUB
AA DD
SD
CC
BE
Type A50
GAP
GAP
Type
of
Shaft
Floating Shafts
Max BE for Various rpms Q
1800
1500
1200
900
750
600
540 &
Less
20
Solid
Tube
48
60
52
67
58
74
68
86
74
94
83
105
87
111
30
Solid
Tube
52
75
57
82
64
91
74
105
81
115
91
129
96
136
40
Solid
Tube
58
82
64
90
72
100
83
116
91
127
102
142
107
150
50
Solid
Tube
60
90
66
99
74
110
86
128
94
140
105
156
111
165
60
Solid
Tube
68
93
74
102
83
114
96
131
105
144
117
161
124
170
70
Solid
Tube
74
106
81
116
91
130
105
150
115
164
129
183
136
193
Q Interpolate for intermediate speeds. Max. BE is based on 70% of the lateral critical
AA DD
OD
CC
SIZE
H
A-HUB
A-HUB
BE
Type A55
Torque Maxl
Rating Bore
Std
(lb-in) Hub
Type
of
Shaft
Min
BE
WR2 (lb-in2)
Weight (lb) s
Basic Cplg
w/No Bore
lb
per in
of BE
Basic Cplg
w/No Bore
WR2
per in
of BE
A-Hub
Floating Shaft
Axial n
Deflection
+/
AA
Std
Hub
Long
Hub
DD
CC
Gap
OD
SD
SIZE
H
20
840
1.625
Solid
Tube
4.803
13.583
10.17
8.58
0.34
0.11
12.73
10.62
0.07
0.06
0.071
3.46
1.77
3.15
2.30
0.618
...
1.500
1.250
...
20
30
1550
2.000
Solid
Tube
4.803
13.583
13.9
12.3
0.50
0.22
20.7
20.1
0.14
0.26
0.047
4.02
1.77
3.15
2.74
0.610
...
2.250
1.500
...
30
40
2740
2.250
Solid
Tube
5.433
13.976
22.1
20.5
0.78
0.34
59.2
53.9
0.34
0.61
0.055
4.84
1.97
3.54
3.23
0.748
...
2.750
1.875
...
40
50
5090
2.750
Solid
Tube
6.535
14.173
38.9
34.4
0.90
0.67
127
115
0.44
1.70
0.063
5.79
2.36
3.94
3.84
0.906
...
3.375
2.000
...
50
60
7740
3.250
Solid
Tube
7.638
14.764
61.5
54.8
1.40
0.56
285
250
1.09
1.52
0.079
6.54
2.76
4.33
4.45
1.063
...
3.500
2.500
...
60
70
12390
3.625
Solid
Tube
10.000
15.157
101
89.2
2.02
0.73
597
522
2.24
3.34
0.094
7.56
3.74
5.31
5.20
1.260
...
4.500
3.000
...
70
H Dimensions are for reference only and are subject to change without notice unless certified.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
s
To obtain total weight: Basic Coupling + BE times Lbs. per in. of BE.
To obtain total WR2: Basic Coupling + BE times WR2 per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
20 (471-710)
FDP
PRODUCT
CLASSIFICATION
Freedom Disc
Performance
10
COUPLING
TYPE
10 = Close Coupled
11 = Close Coupled,
One hub reversed
12 = Close Coupled
Two hubs reversed
20 = Single Flexing.
This type must always
contain one N nonadapter type hub in the
hub description block
30 = Spacer - Non Adapter Style
31 = Spacer - Adapter Style
50 = Floating Shaft - Solid
55 = Floating Shaft - Tubular
CC
HUB 1 & HUB 2
EACH HUB DESCRIPTION
A = Adapter Type
C = Close Coupled Type
Narrow Gap (Long Hubs)
only used on 10 Series
D = Close Coupled Type
Wide Gap (Short Hubs)
DBZ Interchange only used
on 10 Series
G = Gear Coupling Retrofit
Exposed, normally used
on floating shafts
H = Gear Coupling Retrofit
Shrouded, normally used
on floating shafts
L = Large Hub Adapter Type
N = Non-Adapter Type
FEATURE
MODEL
B = Balanced A, B etc.
P = Electrically
Insulated
V = Vertical
S = Special
(471-710) 21
Type FDP10CC,
Dimensions Inches
GAP
C
GAP
D
FDP10
Standard Hub Configuration
SIZE
Torque Allowable
Cplg Wt Cplg WR2
Max w/o Bore w/o Bore
Rating Speed
l
Bore
(lb)
(lb-in2)
(lb-in)
rpm
20
30
40
50
60
70
85
95
105
115
125
1285
2200
4960
8850
14700
23000
44250
61950
84520
110200
153300
7900
6800
5500
4700
4200
3600
3100
2850
2550
2300
2000
1.125
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
6.000
6.02
9.56
17.5
29.8
49.8
75.4
104.3
157
202
269
374
7.32
15.0
40.2
97.1
261
463
801
1150
2700
3900
6780
GAP
FDP11
One Hub Reversed
FDP12
Two Hubs Reversed
B
A
3.46
4.02
4.84
5.79
6.54
7.56
8.82
9.61
10.75
11.93
13.39
Gap
FDP10
FDP11
FDP12
3.94
4.06
4.92
5.94
7.36
8.19
9.41
10.91
11.85
12.83
13.78
4.80
4.98
5.98
7.28
9.04
10.14
11.69
13.39
14.49
15.79
16.77
5.67
5.91
7.05
8.62
10.71
12.09
13.98
15.87
17.13
18.74
19.76
H Dimensions are for reference only and are subject to change without notice unless certified.
1.81
1.87
2.28
2.76
3.44
3.80
4.41
5.12
5.51
5.98
6.46
1.57
2.32
2.76
3.23
3.82
4.41
4.92
5.91
6.46
7.09
8.43
0.26
0.26
0.28
0.35
0.39
0.51
0.55
0.61
0.75
0.79
0.79
FDP10
FDP11
FDP12
0.31
0.31
0.35
0.43
0.47
0.59
0.59
0.67
0.83
0.87
0.87
1.18
1.24
1.42
1.77
2.15
2.54
2.87
3.15
3.46
3.82
3.86
2.05
2.17
2.48
3.11
3.82
4.49
5.16
5.63
6.10
6.77
6.85
Axial
Deflection n
+/
0.094
0.079
0.094
0.102
0.118
0.157
0.157
0.173
0.205
0.260
0.268
SIZE
H
20
30
40
50
60
70
85
95
105
115
125
Standard couplings are manufactured to AGMA 9000 balance class 8. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
22 (471-710)
Type FDP30NN
Dimensions Inches
N-HUB
N-HUB
A D
SIZE
H
20
30
40
50
60
70
85
95
105
115
125
Torque
Rating
(lb-in)
Allowable
Speed
rpm
Max
Bore l
Std
N-Hub
Min
BE
Max
BE
1285
2200
4960
8850
14700
23000
44250
61950
84520
110200
153300
11000
10000
9300
8500
7600
6900
6300
6000
5500
5100
4900
1.625
2.000
2.250
2.750
3.250
3.625
4.250
4.625
5.250
5.875
6.875
2.97
2.95
3.39
3.78
4.37
5.35
5.00
6.57
7.09
7.48
8.66
13.2
13.2
13.4
13.6
14.2
14.4
14.6
15.0
15.4
15.6
15.7
BE
Cplg WR2 Q
with no Bore
(lb-in2)
Cplg Wt t
w/o Bore
(lb)
Basic
Cplg
lb per
in of BE
6.48
8.85
14.7
23.4
39.5
64.9
91.2
131
176
245
356
Basic
Cplg
0.426
0.808
0.989
1.54
1.85
2.64
3.13
4.35
4.85
5.50
7.42
7.46
11.8
34.7
72.8
216
356
782
1250
2110
3670
6880
H Dimensions are for reference only and are subject to change without notice unless certified.
WR2 per
in of BE
0.175
0.796
1.43
3.07
4.95
9.82
16.3
30.3
41.6
60.7
109
3.46
4.02
4.84
5.79
6.54
7.56
8.82
9.61
10.75
11.93
13.39
C
Std
N-Hub
Long
N-Hub
1.77
1.77
1.97
2.36
2.76
3.74
3.74
4.33
4.92
5.51
6.30
3.15
3.15
3.54
3.94
4.33
5.31
5.31
5.91
6.50
7.09
7.87
Axial
Deflection n
+/
SIZE
2.30
2.74
3.23
3.84
4.45
5.20
5.96
6.75
7.46
8.33
9.63
0.094
0.079
0.094
0.102
0.118
0.157
0.157
0.173
0.205
0.260
0.268
20
30
40
50
60
70
85
95
105
115
125
Standard couplings are manufactured to AGMA 9000 balance class 9. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
t To obtain total weight: Basic Coupling + BE times lbs. per inch of BE.
2
2
Q To obtain total WR : Basic Coupling + BE times WR per inch of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA
standards MG1-14.37, 1-20.81 and 1-21.81.
Standard BE Spacers
CPLG
SIZE
3.50
5.00
7.00
9.00
20
30
40
50
60
70
85
95
105
115
125
x
x
x
...
...
...
...
...
...
...
...
x
x
x
x
x
...
x
...
...
...
...
x
x
x
x
x
x
x
...
...
x
x
(471-710) 23
Type FDP31AA,
LL, & AL
Dimensions Inches
L-HUB
A-HUB
A
A-HUB
ANTI-FLY
ADAPTER
L-HUB
L-HUB
A-HUB
BE
SIZE
H
20
30
40
50
60
70
85
95
105
115
125
Torque Allowable
Rating
Speed
(lb-in)
rpm
Max
Max
Bore l Bore l
Std
Large
A-Hub L-Hub
Min
BE
Max
BE
1285
2200
4960
8850
14700
23000
44250
61950
84520
110200
153300
1.625
2.000
2.250
2.750
3.250
3.625
5.000
5.250
6.000
6.500
7.500
2.73
2.72
3.43
3.74
4.84
5.67
6.02
7.20
7.87
8.50
9.02
13.58
13.58
13.98
14.17
14.76
15.16
15.55
16.14
16.54
16.93
17.32
11000
10000
9300
8500
7600
6900
6300
6000
5500
5100
4900
2.250
2.750
3.375
4.125
4.625
5.250
6.250
6.750
7.500
8.500
9.500
Cplg Wt t
w/o Bore
(lb)
Basic
Cplg
7.79
10.4
18.1
29.7
47.8
78.2
123
167
234
318
456
lb per
in of BE
0.426
0.808
0.989
1.54
1.85
2.64
3.13
4.35
4.85
5.50
7.42
Cplg WR2 Q
w/o Bore
(lb-in2)
Basic
Cplg
10.3
18.6
48.3
113
281
490
992
1710
3020
4980
9330
H Dimensions are for reference only and are subject to change without notice unless certified.
WR per
in of BE
0.175
0.796
1.43
3.07
4.95
9.82
16.3
30.3
41.6
60.7
109
3.46
4.02
4.84
5.79
6.54
7.56
8.82
9.61
10.75
11.93
13.39
C
Std
A-Hub
Large
L-Hub
1.77
1.77
1.97
2.36
2.76
3.74
3.74
4.33
4.92
5.51
6.30
1.73
2.13
2.28
2.95
3.58
3.94
4.17
4.41
5.12
5.75
6.46
Axial
Deflection n
+/
SIZE
2.30
2.74
3.23
3.84
4.45
5.20
6.89
7.48
8.47
9.25
10.63
0.59
0.59
0.79
0.79
1.18
1.18
1.38
1.57
1.77
1.97
1.97
0.094
0.079
0.094
0.102
0.118
0.157
0.098
0.110
0.102
0.118
0.134
20
30
40
50
60
70
85
95
105
115
125
Standard couplings are manufactured to AGMA 9000 balance class 9. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
Standard BE Spacers
CPLG
SIZE
3.50
5.00
7.00
8.00
9.00
20
30
40
50
60
70
85
95
105
115
125
x
x
x
...
...
...
...
...
...
...
...
x
x
x
x
x
...
...
...
...
...
...
x
x
x
x
x
...
...
...
...
x
x
...
...
x
x
24 (471-710)
Type FDP20NN
N-HUB
A
N-HUB
GAP
SIZE
H
20
30
40
50
60
70
85
95
105
115
125
Torque
Rating
(lb-in)
Allowable
Speed
rpm
Max
Bore l
Std
N-Hub
1285
2200
4960
8850
14700
23000
44250
61950
84520
110200
153300
7900
6800
5500
4700
4200
3600
3100
2850
2550
2300
2000
1.625
2.000
2.250
2.750
3.250
3.625
4.250
4.625
5.250
5.875
6.875
Cplg Wt
w/o Bore
(lb)
Cplg WR2
w/o Bore
(lb-in2)
5.22
7.32
11.4
18.7
31.2
53.4
74.7
108
147
205
303
5.09
7.45
22.5
47.0
136
243
650
1010
1740
3030
5850
C
A
Std
N-Hub
3.46
4.02
4.84
5.79
6.54
7.56
8.82
9.61
10.75
11.93
13.39
1.77
1.77
1.97
2.36
2.76
3.74
3.74
4.33
4.92
5.51
6.30
H Dimensions are for reference only and are subject to change without notice unless certified.
Long
N-Hub
Axial
Deflection n
+/
Gap
SIZE
3.15
3.15
3.54
3.94
4.33
5.31
5.31
5.91
6.50
7.09
7.87
2.30
2.74
3.23
3.84
4.45
5.20
5.96
6.75
7.46
8.33
9.63
0.047
0.039
0.047
0.051
0.059
0.079
0.079
0.087
0.102
0.130
0.134
0.264
0.256
0.276
0.354
0.394
0.512
0.551
0.610
0.748
0.787
0.787
20
30
40
50
60
70
85
95
105
115
125
Standard couplings are manufactured to AGMA 9000 balance class 7. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
(471-710) 25
Type FDP20AN
A HUB
N HUB
A
SIZE
H
20
30
40
50
60
70
85
95
105
115
125
Max Bore l
Torque Allowable
Rating Speed
(lb-in)
rpm
N Hub
1285
2200
4960
8850
14700
23000
44250
61950
84520
110200
153300
1.625
2.000
2.250
2.750
3.250
3.625
4.250
4.625
5.250
5.875
6.875
7900
6800
5500
4700
4200
3600
3100
2850
2550
2300
2000
A Hub
Cplg Wt
w/o Bore
(lb)
Cplg WR2
w/o Bore
(lb-in2)
1.625
2.000
2.250
2.750
3.250
3.625
5.000
5.250
6.000
6.500
7.500
5.22
7.32
11.4
18.7
31.2
53.4
74.7
108
147
205
303
5.09
7.4
22.5
47.0
136
243
650
1010
1740
3030
5850
GAP
C
A
3.46
4.02
4.84
5.79
6.54
7.56
8.82
9.61
10.75
11.93
13.39
H Dimensions are for reference only and are subject to change without notice unless certified.
N Hub
A Hub
N Hub
A Hub
1.77
1.77
1.97
2.36
2.76
3.74
3.74
4.33
4.92
5.51
6.30
1.77
1.77
1.97
2.36
2.76
3.74
3.74
4.33
4.92
5.51
6.30
2.30
2.74
3.23
3.84
4.45
5.20
5.96
6.75
7.46
8.33
9.63
2.30
2.74
3.23
3.84
4.45
5.20
6.89
7.48
8.46
9.25
10.63
Axial
Deflection n
+/
Gap
SIZE
0.047
0.039
0.047
0.051
0.059
0.079
0.079
0.087
0.102
0.130
0.134
0.618
0.610
0.748
0.906
1.063
1.260
1.417
1.614
1.831
1.988
2.067
20
30
40
50
60
70
85
95
105
115
125
Standard couplings are manufactured to AGMA 9000 balance class 7. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
26 (471-710)
Type FDP50NN,
55NN
SIZE
GAP
N-HUB
AD
N-HUB
SD
BE
Type N50
GAP
GAP
N-HUB
N-HUB
OD
Type
of
Shaft
Floating Shafts
Max BE for Various rpms Q
1800
1500
1200
900
750
600
540 &
Less
20
Solid
Tube
48
60
52
67
58
74
68
86
74
94
83
105
87
111
30
Solid
Tube
52
75
57
82
64
91
74
105
81
115
91
129
96
136
40
Solid
Tube
58
82
64
90
72
100
83
116
91
127
102
142
107
150
50
Solid
Tube
60
90
66
99
74
110
86
128
94
140
105
156
111
165
60
Solid
Tube
68
93
74
102
83
114
96
131
105
144
117
161
124
170
70
Solid
Tube
74
106
81
116
91
130
105
150
115
164
129
183
136
193
85
Solid
Tube
80
111
88
122
98
136
113
157
124
172
139
193
147
203
95
Solid
Tube
86
122
94
134
105
150
121
173
133
190
149
212
157
223
105
Solid
Tube
88
128
97
140
108
156
125
180
137
198
153
221
161
233
115
Solid
Tube
91
134
100
146
111
164
129
189
141
207
158
232
166
244
125
Solid
Tube
99
145
109
159
122
178
141
206
154
225
172
252
182
266
Q Interpolate for intermediate speeds. Max. BE is based on 70% of the lateral critical
BE
Type N55
SIZE
H
Torque Maxl
Rating Bore
Std
(lb-in) N-Hub
Type
of
Shaft
Min
BE
WR2 (lb-in2)
Weight (lb) s
Basic Cplg
w/No Bore
lb
per in
of BE
Axial n
Deflection
+/
Floating Shaft
Basic Cplg
w/No Bore
WR2
per in
of BE
9.91
7.92
0.07
0.06
0.094
3.46
1.77
3.15
2.30
Std
Long
N-Hub N-Hub
Gap
SIZE
H
OD
SD
0.264
...
1.500
1.250
...
20
20
1285
1.625
Solid
Tube
4.094
13.189
9.02
7.27
0.34
0.11
30
2200
2.000
Solid
Tube
4.094
13.189
12.6
10.8
0.50
0.22
14.3
14.4
0.14
0.26
0.079
4.02
1.77
3.15
2.74
0.256
...
2.250
1.500
...
30
40
4960
2.250
Solid
Tube
4.488
13.386
19.4
17.4
0.78
0.34
43.5
40.2
0.34
0.61
0.094
4.84
1.97
3.54
3.23
0.276
...
2.750
1.875
...
40
50
8850
2.750
Solid
Tube
5.433
13.583
32.7
27.9
0.90
0.67
91.7
86.6
0.44
1.70
0.102
5.79
2.36
3.94
3.84
0.354
...
3.375
2.000
...
50
60
14700
3.250
Solid
Tube
6.299
14.173
53.7
45.8
1.40
0.56
265
237
1.09
1.52
0.118
6.54
2.76
4.33
4.45
0.394
...
3.500
2.500
...
60
70
23000
3.625
Solid
Tube
8.504
14.370
89.9
76.3
2.02
0.73
468
410
2.24
3.34
0.157
7.56
3.74
5.31
5.20
0.512
...
4.500
3.000
...
70
85
44250
4.250
Solid
Tube
8.583
14.567
126
106
2.69
1.06
1260
869
4.15
5.95
0.157
8.82
3.74
5.31
5.96
0.551
...
5.000
3.500
...
85
95
61950
4.625
Solid
Tube
9.882
14.961
181
155
3.53
1.29
1950
1350
7.09
10.55
0.173
9.61
4.33
5.91
6.75
0.610
...
6.000
4.000
...
95
105
84520
5.250
Solid
Tube
11.339
15.354
249
204
3.98
1.40
3380
2390
9.03
13.54
0.205
10.75
4.92
6.50
7.46
0.748
...
6.500
4.250
...
105
115
110200
5.875
Solid
Tube
12.598
15.551
353
274
4.48
2.30
5910
4100
11.37
27.07
0.260
11.93
5.51
7.09
8.33
0.787
...
7.250
4.500
...
115
125
153300
6.875
Solid
Tube
14.173
15.748
516
404
6.38
2.69
11400
7700
23.09
44.65
0.268
13.39
6.30
7.87
9.63
0.787
...
8.500
5.375
...
125
H Dimensions are for reference only and are subject to change without notice unless certified.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
s
To obtain total weight: Basic Coupling + BE times Lbs. per in. of BE.
To obtain total WR2: Basic Coupling + BE times WR2 per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
(471-710) 27
Type FDP50AA,
55AA
SIZE
GAP
AA DD
A-HUB
A-HUB
BE
Type A50
GAP
GAP
AA DD
ANTI-FLY
ADAPTER
A-HUB
OD
A-HUB
Floating Shafts
Max BE for Various rpms Q
1800
1500
1200
900
750
600
540 &
Less
20
Solid
Tube
48
60
52
67
58
74
68
86
74
94
83
105
87
111
30
Solid
Tube
52
75
57
82
64
91
74
105
81
115
91
129
96
136
40
Solid
Tube
58
82
64
90
72
100
83
116
91
127
102
142
107
150
50
Solid
Tube
60
90
66
99
74
110
86
128
94
140
105
156
111
165
60
Solid
Tube
68
93
74
102
83
114
96
131
105
144
117
161
124
170
70
Solid
Tube
74
106
81
116
91
130
105
150
115
164
129
183
136
193
85
Solid
Tube
80
111
88
122
98
136
113
157
124
172
139
193
147
203
95
Solid
Tube
86
122
94
134
105
150
121
173
133
190
149
212
157
223
105
Solid
Tube
88
128
97
140
108
156
125
180
137
198
153
221
161
233
115
Solid
Tube
91
134
100
146
111
164
129
189
141
207
158
232
166
244
125
Solid
Tube
99
145
109
159
122
178
141
206
154
225
172
252
182
266
SD
CC
Type
of
Shaft
Q Interpolate for intermediate speeds. Max. BE is based on 70% of the lateral critical
CC
SIZE
H
BE
Type A55
Torque Maxl
Rating Bore
Std
(lb-in) A-Hub
Type
of
Shaft
Min
BE
WR2 (lb-in2)
Weight (lb) s
Basic Cplg
w/No Bore
lb
per in
of BE
Basic Cplg
w/No Bore
WR2
per in
of BE
CC
Axial n
Deflection
+/
AA
Floating Shaft
Std
Long
A-Hub A-Hub
DD
Gap
OD
SD
SIZE
H
20
1285
1.625
Solid
Tube
4.803
13.583
10.2
8.63
0.34
0.11
12.8
10.7
0.07
0.06
0.094
3.46
1.77
3.15
2.30
0.618
...
1.500
1.250
...
20
30
2200
2.000
Solid
Tube
4.803
13.583
14.0
12.3
0.50
0.22
20.9
20.3
0.14
0.26
0.079
4.02
1.77
3.15
2.74
0.610
...
2.250
1.500
...
30
40
4960
2.250
Solid
Tube
5.433
13.976
22.3
20.7
0.78
0.34
60.2
54.9
0.34
0.61
0.094
4.84
1.97
3.54
3.23
0.748
...
2.750
1.875
...
40
50
8850
2.750
Solid
Tube
6.535
14.173
39.2
34.6
0.90
0.67
128
117
0.44
1.70
0.102
5.79
2.36
3.94
3.84
0.906
...
3.375
2.000
...
50
60
14700
3.250
Solid
Tube
7.638
14.764
61.8
55.1
1.40
0.56
333
298
1.09
1.52
0.118
6.54
2.76
4.33
4.45
1.063
...
3.500
2.500
...
60
70
23000
3.625
Solid
Tube
10.000
15.157
102
90.0
2.02
0.73
607
531
2.24
3.34
0.157
7.56
3.74
5.31
5.20
1.260
...
4.500
3.000
...
70
85
44250
5.000
Solid
Tube
10.315
15.551
155
138
2.69
1.06
1490
1060
4.15
5.95
0.157
8.82
3.74
5.31
6.89
1.417
...
5.000
3.500
...
85
95
61950
5.250
Solid
Tube
11.890
16.142
213
192
3.53
1.29
2410
1740
7.09
10.55
0.173
9.61
4.33
5.91
7.48
1.614
...
6.000
4.000
...
95
105
84520
6.000
Solid
Tube
13.504
16.535
302
262
3.98
1.40
4330
3230
9.03
13.54
0.205
10.75
4.92
6.50
8.47
1.831
...
6.500
4.250
...
105
115
110200
6.500
Solid
Tube
15.000
16.929
419
346
4.48
2.30
7300
5260
11.37
27.07
0.260
11.93
5.51
7.09
9.25
1.988
...
7.250
4.500
...
115
125
153300
7.500
Solid
Tube
16.732
17.323
603
500
6.38
2.69
13900
9880
23.09
44.65
0.268
13.39
6.30
7.87
10.63
2.067
...
8.500
5.375
...
125
H Dimensions are for reference only and are subject to change without notice unless certified.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
s
To obtain total weight: Basic Coupling + BE times Lbs. per in. of BE.
To obtain total WR2: Basic Coupling + BE times WR2 per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
28 (471-710)
Type FDP55GG,
55HH
BE
OD
CC
LIFELIGN GEAR
CPLG SIZE H
FREEDOM DISC
CPLG SIZE H
Adapter Style
D
(Ref.)
CC
Min
BE
1010G
50FDP
60FDP
8,850
10,080
1
2
5.79
6.54
4.56
4.37
4.13
12.52
12.64
0.35
0.39
1015G
60FDP
70FDP
14,700
20,790
1
2
6.54
7.56
6.00
4.33
6.06
13.04
17.47
0.39
0.51
1020G
70FDP
85FDP
23,000
37,800
1
2
7.56
8.82
7.00
6.06
5.94
17.47
17.71
0.51
0.55
1025G
85FDP
95FDP
44,250
61,950
1
2
8.82
9.61
8.37
6.05
5.74
17.93
18.05
0.55
0.61
1030G
105FDP
115FDP
84,520
107,100
1
2
10.75
11.93
9.44
5.46
7.30
18.01
22.09
0.75
0.79
1035G
115FDP
125FDP
110,200
153,300
1
2
11.93
13.39
11.00
7.56
7.44
22.61
23.55
0.79
0.79
1040G
125FDP
153,300
13.39
12.50
7.44
23.55
0.79
H Dimensions are for reference only and are subject to change without notice unless certified.
(471-710) 29
Type FD Designs
FD-N10
FD-A10
FD-M10
FD-N20, M20
FD-A51, 52
ADDITIONAL DESIGNS: Consult Falk for electrically insulated, flange or flywheel mounting, disc brake, shear pin, shaft-hub locking
devices, composite shafting, stainless steel, etc.
30 (471-710)
FD
SIZE
Refers to HP per
1000 RPM.
Example: 2500
rates 2500 HP
per 1000 RPM.
PRODUCT
CLASSIFICATION
Falk Disc
06
NUMBER
OF BOLTS
04, 06, 08,
10, or 12
N
HUB
DESCRIPTION
A = Adapter
C = Close
Coupled
M = Mixed
N = General
Purpose
10
TYPE
10 = Spacer
20 = Single Flex
25 = Radial Load
45 = Shear Pin
50 = Solid Floating Shaft
51 = Gear to Disc Retrofit
(Shrouded Bolts)
52 = Gear to Disc Retrofit
(Exposed Bolts)
55 = Tubular Floating Shaft
56 = Tubular Floating Shaft
(Plugged Ends)
57 = Tubular Floating Shaft
(One End Plugged)
61 = Brakewheel
63 = Disc Brake
80 = Low Speed
90 = Flywheel
MODIFICATIONS
MODEL
B = Balanced
1, 2, 3,
I = Insulated
etc.
L = Limited
End Float
S = Special
T = Thrust
Transmitting
V = Vertical
(471-710) 31
Type FD-N10
N-HUB
N-HUB
Torque
Rating
(lb-in)
SIZE
H
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
14000FD10
15300FD08
16800FD10
17200FD12
18500FD08
19700FD10
20000FD12
23800FD10
24000FD12
24000FD08
28000FD08
29000FD12
31000FD10
36000FD10
37700FD12
44000FD12
157,600
199,100
291,800
407,800
552,700
693,300
819,300
882,000
964,300
1,058,000
1,084,000
1,166,000
1,241,000
1,260,000
1,499,000
1,512,000
1,512,600
1,764,700
1,827,000
1,953,000
2,268,000
2,375,000
2,772,000
Allowable Speed
rpm
AGMA
Class 8
AGMA
Class 9
Max
Bore l
Recom
Key
4,420
4,140
3,560
3,520
3,310
3,200
3,050
3,070
2,910
2,900
3,020
2,780
2,760
2,880
2,690
2,740
2,640
2,580
2,670
2,530
2,480
2,510
2,450
6,400
5,700
5,700
5,200
4,700
4,330
4,221
4,330
3,580
3,990
4,330
3,350
3,660
3,990
3,470
3,660
3,240
3,110
3,470
3,240
3,110
3,240
3,110
5.000
6.000
6.875
7.500
8.250
8.750
10.000
8.500
11.000
9.750
8.500
11.500
10.750
9.750
11.500
10.750
12.000
13.000
11.500
11.500
12.750
11.500
12.750
BE
Min
Bore
Min
BE
Max
BE
2.50
2.75
3.00
3.50
4.00
4.50
4.50
4.50
5.00
4.50
4.50
5.00
5.00
4.50
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
9.00
9.25
9.75
11.87
12.50
15.25
15.50
15.25
17.00
15.50
15.25
17.75
17.00
15.50
17.75
17.00
19.00
19.25
17.75
19.00
19.25
19.00
19.25
19.0
21.0
24.0
26.0
28.0
32.0
35.0
32.0
37.5
35.0
32.0
39.5
37.5
35.0
39.5
37.5
42.5
44.0
39.5
42.5
44.0
42.5
44.0
Wt (lb) t
at Max Bore
WR2 (lb-in2) Q
at Max.Bore
Basic
Cplg
lb
Per in
of BE
Basic
Cplg
138
191
265
345
445
600
735
685
925
890
685
1130
1130
890
1260
1130
1360
1500
1260
1640
1780
1640
1780
1.65
1.74
2.36
2.95
3.53
4.22
4.67
6.20
5.11
6.80
8.00
6.09
7.50
8.10
8.20
8.90
7.14
7.71
9.70
9.80
11.60
12.40
14.20
2,000
3,740
6,540
10,160
16,500
27,900
43,100
29,600
64,000
46,400
29,300
93,200
69,700
46,100
92,500
69,200
125,000
131,000
91,900
127,000
158,000
126,000
157,000
H Dimensions are for reference only and are subject to change without notice unless certified.
WR2
Per in
of BE
9.22
13.9
26.6
41.2
56.7
95.6
129
133
169
181
164
236
239
208
308
276
273
345
357
394
492
478
582
C
A
10.85
12.13
13.63
14.76
16.15
18.50
20.10
18.50
21.90
20.10
18.50
23.10
21.90
20.10
23.10
21.90
24.75
25.75
23.10
24.75
25.75
24.75
25.75
Std
N-Hub
5.00
5.75
6.50
6.75
7.50
9.00
10.00
10.94
10.50
12.29
10.94
11.00
13.50
12.29
14.01
13.50
11.50
12.00
14.01
14.65
15.36
14.65
15.36
Axial
Deflection n
+/
SIZE
7.18
8.41
9.46
10.27
11.08
12.70
13.15
11.70
14.35
13.15
11.70
15.05
14.35
13.15
15.05
14.35
15.70
16.50
15.05
15.70
16.50
15.70
16.50
.170
.196
.231
.243
.255
.327
.364
.283
.382
.264
.179
.414
.283
.199
.299
.212
.434
.484
.223
.315
.335
.234
.248
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
14000FD10
15300FD08
16800FD10
17200FD12
18500FD08
19700FD10
20000FD12
23800FD10
24000FD12
24000FD08
28000FD08
29000FD12
31000FD10
36000FD10
37700FD12
44000FD12
Standard couplings are manufactured to AGMA 9000 balance class 8. Maximum speeds are AGMA Class 9. Speeds shown are for applications with average system sensitivity.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
t To obtain total weight: Basic Coupling + BE times lbs. per in. of BE.
2
2
Q To obtain total WR : Basic Coupling + BE times WR per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
CPLG
SIZE
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
32 (471-710)
Standard BE Spacers
9.00
9.25
x
Not Stocked
The Falk Corporation, 2002, 2004.
Type FD-A10
A-HUB
A-HUB
AA
DD
CC
SIZE
H
Allowable Speed
Max
rpm
Torque
Bore l
Rating
Recom
(lb-in) AGMA AGMA
Key
Class 8 Class 9
2500FD08 157,600
3160FD08 199,100
4630FD08 291,800
6470FD08 407,800
8770FD08 552,700
11000FD08 693,300
13000FD08 819,300
15300FD08 964,300
18500FD08 1,166,000
24000FD08 1,512,600
28000FD08 1,764,700
...
...
...
...
...
2,860
2,730
2,580
2,120
2,380
2,300
5,910
5,470
5,100
4,750
4,460
4,330
3,990
3,580
3,350
3,240
3,110
5.875
7.000
8.000
8.750
9.625
11.125
12.500
13.625
14.250
14.250
15.750
BE
Min
Bore
Min
BE
Max
BE
2.50
2.75
3.00
3.50
4.00
4.50
4.50
5.00
5.00
5.00
5.00
9.00
9.75
10.75
12.25
14.00
15.38
16.28
16.74
18.10
19.84
20.64
22
24
27
30
33
37
40
43
46
49
51
Wt (lb) t
at Max Bore
CC
WR2 (lb-in2) Q
at Max Bore
Basic
Cplg
lb
Per in
of BE
Basic
Cplg
188
275
365
500
665
1,020
1,260
1,650
1,940
2,320
2,680
1.65
1.74
2.36
2.95
3.53
4.22
4.67
5.11
6.09
7.14
7.71
3,120
5,950
10,180
16,410
26,670
52,600
79,600
122,000
160,000
208,000
272,000
H Dimensions are for reference only and are subject to change without notice unless certified.
WR2
Per in
of BE
9.22
13.9
26.6
41.2
56.7
95.6
129
169
236
273
345
CC
AA
10.85
12.13
13.63
14.76
16.15
18.50
20.10
21.90
23.10
24.75
25.75
Std
A-Hub
5.08
5.83
6.58
6.83
7.58
9.08
10.08
10.58
11.08
11.58
12.08
DD
Axial
Deflection n
+/
SIZE
8.38
9.96
11.02
12.40
13.46
15.59
17.32
19.06
19.84
20.08
22.05
.170
.196
.231
.243
.255
.327
.364
.382
.414
.434
.484
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
15300FD08
18500FD08
24000FD08
28000FD08
Standard couplings are manufactured to AGMA 9000 balance class 9. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
t To obtain total weight: Basic Coupling + BE times lbs. per in. of BE.
2
2
Q To obtain total WR : Basic Coupling + BE times WR per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
CPLG
SIZE
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
Standard BE Spacers
11.46
x
...
12.17
x
Not Stocked
(471-710) 33
Type FD-M10
A-HUB
N-HUB
A
SIZE
H
Allowable
Max Bore l
Speed rpm Recom Key
Torque
Rating
(lb-in) AGMA AGMA A
Class 8 Class 9 Hub
2500FD08 157,600
3160FD08 199,100
4630FD08 291,800
6470FD08 407,800
8770FD08 552,700
11000FD08 693,300
13000FD08 819,300
15300FD08 964,300
18500FD08 1,166,000
24000FD08 1,512,600
28000FD08 1,764,700
4,240
4,110
3,830
3,580
3,360
2,870
2,730
2,580
2,480
2,380
2,300
6,400
5,700
5,700
5,200
4,700
4,330
3,990
3,660
3,470
3,240
3,110
AA
DD
5.875
7.000
8.000
8.750
9.625
11.125
12.500
13.625
14.250
14.250
15.750
N
Hub
5.000
6.000
6.875
7.500
8.250
8.750
10.000
11.000
11.500
12.000
13.000
BE
Min
Bore
Min
BE
Max
BE
2.50
2.75
3.00
3.50
4.00
4.50
4.50
5.00
5.00
5.00
5.00
10.23
10.71
11.39
13.76
14.72
16.40
17.30
17.70
19.00
20.80
21.50
21.00
23.00
25.00
28.00
31.00
34.00
37.00
40.00
43.00
46.00
48.00
Wt (lb) t
at Max Bore
Basic Perlbin
Cplg of BE
161
263
315
420
550
809
979
1,290
1,530
1,830
2,100
1.65
1.74
2.36
2.95
3.53
4.22
4.67
5.11
6.09
7.14
7.71
CC
WR2 (lb-in2) Q
at Max Bore
Basic
Cplg
2,560
4,850
8,360
13,280
21,580
40,400
61,800
93,800
127,400
167,360
203,600
H Dimensions are for reference only and are subject to change without notice unless certified.
9.22
13.9
26.6
41.2
56.7
95.6
129
169
236
273
345
N-Hub
CC
AA
Std
Hub
DD
Std
Hub
Axial
Deflection n
+/
10.85
12.13
13.63
14.76
16.15
18.50
20.10
21.90
23.10
24.75
25.75
5.08
5.83
6.58
6.83
7.58
9.08
10.08
10.58
11.08
11.58
12.08
8.38
9.96
11.02
12.40
13.46
15.59
17.32
19.06
19.84
20.08
22.05
10.85
12.13
13.63
14.76
16.15
18.50
20.10
21.90
23.10
24.75
25.75
5.00
5.75
6.50
6.75
7.50
9.00
10.00
10.50
11.00
11.50
12.00
7.18
8.41
9.46
10.27
11.08
11.70
13.15
14.35
15.05
15.70
16.50
.170
.196
.231
.243
.255
.327
.364
.382
.414
.434
.484
WR
Per in
of BE
A-Hub
SIZE
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
15300FD08
18500FD08
24000FD08
28000FD08
Standard couplings are manufactured to AGMA 9000 balance class 8. Speeds shown are for applications with average system sensitivity. For other system sensitivities or
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
t To obtain total weight: Basic Coupling + BE times lbs. per in. of BE.
2
2
Q To obtain total WR : Basic Coupling + BE times WR per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
Standard BE Spacers
CPLG
SIZE
10.23
10.71
2500FD
3160FD
x
...
4630FD
6470FD
8770FD
34 (471-710)
Not Stocked
Type FD-N20
N-HUB
A
N-HUB
C
GAP
SIZE
H
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
14000FD10
15300FD08
16800FD10
17200FD12
18500FD08
19700FD10
20000FD12
23800FD10
24000FD12
24000FD08
28000FD08
29000FD12
31000FD10
36000FD10
37700FD12
44000FD12
Torque
Rating
(lb-in)
Allowable
Speed
rpm
Max
Bore l
Recom
Key
Min
Bore
157,600
199,100
291,800
407,800
552,700
693,300
819,300
882,000
964,300
1,058,000
1,084,000
1,166,000
1,241,000
1,260,000
1,499,000
1,512,000
1,512,600
1,764,700
1,827,000
1,953,000
2,268,000
2,375,000
2,772,000
3,080
2,850
2,650
2,510
2,380
2,530
2,380
2,570
2,280
2,400
2,580
2,180
2,280
2,420
2,220
2,300
2,110
2,060
2,240
2,110
2,080
2,120
2,100
5.000
6.000
6.875
7.500
8.250
8.750
10.000
8.500
11.000
9.750
8.500
11.500
10.750
9.750
11.500
10.750
12.000
13.000
11.500
11.500
12.750
11.500
12.750
2.50
2.75
3.00
3.50
4.00
4.50
4.50
4.50
5.00
4.50
4.50
5.00
5.00
4.50
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
Max
Radial
Load
(lb)
Wt
(lb)
at Max
Bore
WR2
(lb-in2)
at Max
Bore
1600
1600
2100
2700
3400
95.9
134
187
237
302
456
596
428
722
571
419
875
722
559
810
701
1,020
1,140
787
1,030
1,080
1,000
1,050
1,280
2,380
4,180
6,370
9,875
17,300
27,800
15,100
40,100
24,700
14,500
54,300
37,200
24,000
47,500
35,500
71,100
88,800
45,600
65,500
79,100
63,400
76,300
10.85
12.13
13.63
14.76
16.15
18.50
20.10
18.50
21.90
20.10
18.50
23.10
21.90
20.10
23.10
21.90
24.75
25.75
23.10
24.75
25.75
24.75
25.75
Consult
Falk
H Dimensions are for reference only and are subject to change without notice unless certified.
C
Std
N-Hub
Axial
Deflection n
+/
Gap
SIZE
5.00
5.75
6.50
6.75
7.50
9.00
10.00
10.94
10.50
12.29
10.94
11.00
13.50
12.29
14.81
13.50
11.50
12.00
14.81
14.65
15.36
14.65
15.36
7.18
8.41
9.46
10.27
11.08
11.70
13.15
11.70
14.35
13.15
11.70
15.05
14.35
13.15
15.05
14.35
15.70
16.50
15.05
15.70
16.50
15.70
16.50
.085
.098
.116
.122
.128
.164
.182
.142
.191
.132
.090
.207
.142
.100
.150
.106
.217
.242
.112
.158
.168
.117
.124
.895
.851
.851
1.060
1.095
1.230
1.230
1.230
1.230
1.230
1.230
1.275
1.230
1.230
1.275
1.230
1.380
1.410
1.275
1.380
1.410
1.380
1.410
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
14000FD10
15300FD08
16800FD10
17200FD12
18500FD08
19700FD10
20000FD12
23800FD10
24000FD12
24000FD08
28000FD08
29000FD12
31000FD10
36000FD10
37700FD12
44000FD12
Allowable speed is for AGMA 9000 balance class 7. Allowable speed is for applications with average system sensitivity and is based on use with floating shafts.Maximum
operating speed of floating shaft assemblies is dependent on the lateral critical speed of the shaft.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
(471-710) 35
Type FD-N50,
N55
SIZE
N-HUB
A D
SD
N-HUB
BE
Type N50
A D
Type
of
Shaft
Floating Shafts
Max BE for Various rpms Q
1800
1500
1200
900
750
600
540 &
Less
2500FD08
Solid
Tube
101
132
112
146
123
161
143
180
157
180
175
180
182
180
3160FD08
Solid
Tube
104
142
115
158
127
174
147
180
162
180
180
180
187
180
4630FD08
Solid
Tube
111
150
122
166
135
180
157
180
172
180
192
180
198
180
6470FD08
Solid
Tube
123
160
136
176
150
180
174
180
191
180
200
180
200
180
8770FD08
Solid
Tube
123
168
136
180
150
180
174
180
191
180
200
180
200
180
N-HUB
N-HUB
OD
BE
Type N55
Torque
Rating
(lb-in)
Max
Bore l
Recom
Key
Type
of
Shaft
Min
BE
2500FD08
157,600
5.000
Solid
Tube
3160FD08
199,100
6.000
4630FD08
291,800
6470FD08
8770FD08
SIZE
H
Weight (lb) s
WR2 (lb-in2)
N-Hub
Axial n
Deflection
+/
23.20
30.50
.170
10.85
4,770
4.680
30.00
36.80
.196
9.40
3.78
8,335
8.055
49.00
68.00
420
580
14.23
4.22
12,145
12.440
585
750
14.23
4.67
19,715
19.475
Basic Cplg
w/Max Bore
N-Hub
lb
per in
of BE
Basic Cplg
w/Max Bore
N-Hub
WR2
per in
of BE
15
178
218
6.42
2.89
2,490
2.370
Solid
Tube
17
266
326
7.35
2.54
6.875
Solid
Tube
19
375
455
407,800
7.500
Solid
Tube
20
552,700
8.250
Solid
Tube
23
Floating Shaft
SIZE
H
OD
SD
5.00
7.18
...
7.00
5.38
...
2500FD08
12.13
5.75
8.41
...
8.00
5.75
...
3160FD08
.231
13.63
6.50
9.46
...
9.00
6.50
...
4630FD08
114.00
95.00
.243
14.76
6.75
10.27
...
10.00
8.00
...
6470FD08
114.00
128.00
.255
16.15
7.50
11.08
...
11.00
8.00
...
8770FD08
H Dimensions are for reference only and are subject to change without notice unless certified.
Std Hub
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
s
To obtain total weight: Basic Coupling + BE times Lbs. per in. of BE.
To obtain total WR2: Basic Coupling + BE times WR2 per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA standards MG1-14.37, 1-20.81
and 1-21.81.
36 (471-710)
Type FD-A50,
A55
SIZE
A-HUB
A-HUB
SD
AA DD
BE
CC
Type A50
Type
of
Shaft
Floating Shafts
Max BE for Various rpms Q
1800
1500
1200
900
750
600
540 &
Less
2500FD08
Solid
Tube
104
134
114
148
126
164
145
180
159
180
177
180
185
180
3160FD08
Solid
Tube
108
145
119
161
131
177
151
180
166
180
184
180
191
180
4630FD08
Solid
Tube
115
153
126
170
139
180
161
180
176
180
196
180
200
180
6470FD08
Solid
Tube
127
163
140
180
154
180
178
180
195
180
200
180
200
180
8770FD08
Solid
Tube
128
172
141
180
155
180
179
180
196
180
200
180
200
180
AA DD
OD
BE
CC
Type A55
WR2 (lb-in2)
A-Hub
lb
Per in
of BE
Basic Cplg
w/Max Bore
A-Hub
WR2
Per in
of BE
Axial
Deflection n
+/
15
218
263
6.42
2.89
3,740
3,600
23.20
30.50
.170
10.85
Solid
Tube
17
330
405
7.35
2.54
7,235
7,125
30.00
36.80
.196
8.000
Solid
Tube
19
450
550
9.40
3.78
12,330
11,990
49.00
68.00
407,800
8.750
Solid
Tube
20
535
730
14.23
4.22
18,935
19,300
552,700
9.625
Solid
Tube
23
760
965
14.23
4.67
30,910
30,610
Max
Bore l
Recom
Key
Type
of
Shaft
Min
BE
2500FD08
157,600
5.875
Solid
Tube
3160FD08
199,100
7.000
4630FD08
291,800
6470FD08
8770FD08
Weight (lb) s
Basic Cplg
w/Max Bore
A-Hub
Torque
Rating
(lb-in)
SIZE
A-HUB
A-HUB
AA
CC
Floating Shaft
SIZE
H
DD
OD
SD
5.08
8.38
...
7.00
5.38
...
2500FD08
12.13
5.83
9.96
...
8.00
5.75
...
3160FD08
.231
13.63
6.58
11.02
...
9.00
6.50
...
4630FD08
114.00
95.00
.243
14.76
6.83
12.40
...
10.00
8.00
...
6470FD08
114.00
128.00
.255
16.15
7.58
13.46
...
11.00
8.00
...
8770FD08
Std Hub
H Dimensions are for reference only and are subject to change without notice unless certified.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
s
To obtain total weight: Basic Coupling + BE times Lbs. per in. of BE.
To obtain total WR2: Basic Coupling + BE times WR2 per in. of BE.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA
standards MG1-14.37, 1-20.81 and 1-21.81.
(471-710) 37
Type FD-M20
A-HUB
N-HUB
DD
GAP
SIZE
H
Torque Allowable
Rating Speed rpm
(lb-in)
2500FD08 157,600
3160FD08 199,100
4630FD08 291,800
6470FD08 407,800
8770FD08 552,700
11000FD08 693,300
13000FD08 819,300
15300FD08 964,300
18500FD08 1,166,000
24000FD08 1,512,600
28000FD08 1,764,700
3,360
3,070
2,880
2,690
2,520
2,220
2,090
1,990
1,920
1,840
1,780
Max Bore l
Recom Key
A
Hub
N
Hub
5.875
7.000
8.000
8.750
9.625
11.125
12.500
13.625
14.250
14.250
15.750
5.000
6.000
6.875
7.500
8.250
8.750
10.000
11.000
11.500
12.000
13.000
Min
Bore
2.50
2.75
3.00
3.50
4.00
4.50
4.50
5.00
5.00
5.00
5.00
Max
Wt
WR2
Radial
(lb)
(lb-in2)
Load at Max at Max
(lb)
Bore
Bore
1600
1600
2100
2700
3400
Consult
Falk
124
178
240
320
420
638
825
1030
1210
1430
1650
1,850
3,500
6,040
9,575
15,090
29,200
46,000
68,300
89,400
115,000
151,000
AA
CC
A Hub
N Hub
CC
AA
Std
Hub
DD
Std
Hub
Axial
Deflection n
+/
10.85
12.13
13.63
14.76
16.15
18.50
20.10
21.90
23.10
24.75
25.75
5.08
5.83
6.58
6.83
7.58
9.08
10.08
10.58
11.08
11.58
12.08
8.38
9.96
11.02
12.40
13.46
15.59
17.32
19.06
19.84
20.08
22.05
10.85
12.13
13.63
14.76
16.15
18.50
20.10
21.90
23.10
24.75
25.75
5.00
5.75
6.50
6.75
7.50
9.00
10.00
10.50
11.00
11.50
12.00
7.18
8.41
9.46
10.27
11.08
11.70
13.15
14.35
15.05
15.70
16.50
.085
.098
.116
.122
.128
.164
.182
.191
.207
.217
.242
H Dimensions are for reference only and are subject to change without notice unless certified.
Gap
SIZE
2.125
2.311
2.491
2.950
3.315
10.15
11.15
12.15
13.10
13.00
14.03
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
15300FD08
18500FD08
24000FD08
28000FD08
Allowable speed is for AGMA 9000 balance class 7. Allowable speed is for applications with average system sensitivity and is based on use with floating shafts.
Maximum operating speed of floating shaft assemblies is dependent on the lateral critical speed of the shaft.
l Hubs are furnished with interference fit per Table 25 on Page 51 unless otherwise specified.
n Values shown are based on no angular misalignment. The axial centering force restricts motor end float and satisfies the requirements of NEMA
standards MG1-14.37, 1-20.81 and 1-21.81.
38 (471-710)
Type FDC-10,
11 & 12
Dimensions Inches
M
H
M
H
GAP
C
GAP
C
FDC-11
One Hub Reversed
D
M
H
GAP
B
FDC-10
Standard Hub Configuration
M
B
FDC-12
Two Hubs Reversed
DRIVE
SIZE
H
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
Torque Max
Rating Speed
(lb-in)
Bore
(in)
157600
199100
291800
407800
552700
4.250
5.000
5.500
6.000
6.250
3080
2850
2650
2510
2380
Max
2400
4530
7540
12100
19000
A
10.85
12.13
13.63
14.76
16.15
B
C10
C11
C12
10.50
12.00
13.00
13.86
14.64
14.55
16.60
18.00
19.07
20.09
18.60
21.20
23.00
24.28
25.54
H Dimensions are for reference only and are subject to change without notice unless cerifies.
4.75
5.50
6.00
6.36
6.75
5.97
6.86
7.75
8.44
8.88
0.89
0.85
0.85
1.06
1.09
0.89
1.09
1.25
1.34
1.65
C10
Gap
C11
C12
Axial
DeflecTion
+/-
DRIVE
SIZE
1.00
1.00
1.00
1.14
1.14
5.05
5.60
6.00
6.35
6.59
9.10
10.20
11.00
11.56
12.04
0.170
0.196
0.231
0.243
0.255
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
Minimum service factor must be 1.5 when at max. Bore with standard square key.
(471-710) 39
Type FD-A51,
A52
PLATE ADAPTER
SD
A D BC
RIGID
COUPLING
HUB
BE
A D BC
SD
CC
Industry
Designation
FALK
DISC
CPLG
SIZE
H
SPOOL
ADAPTER
N-Hub Bore l
Assy
Torque
Rating
(lb-in)
Max
Recom
Key
BE Min
Min
Adapter
Style
CC
A51
Shrouded
Bolt
A52
Exposed
Bolt
A51
Shrouded
Bolt
A52
Exposed
Bolt
D
(Ref)
1040G
2500FD08
3160FD08
4630FD08
157,600
199,100
270,900
5.000
6.000
6.875
2.50
2.75
3.00
Spool
Spool
Spool
12.75
12.75
12.75
25.50
27.30
29.20
26.50
28.40
32.20
5.00
5.75
6.50
7.715
7.871
8.091
8.545
8.411
9.591
12.500
12.500
12.500
1045G
2500FD08
3160FD08
4630FD08
6470FD08
157,600
199,100
291,800
371,700
5.000
6.000
6.875
7.500
2.50
2.75
3.00
3.50
Spool
Spool
Spool
Spool
14.00
14.00
14.00
14.00
25.50
27.30
29.20
31.70
26.50
28.40
30.30
32.80
5.00
5.75
6.50
6.75
7.715
7.871
8.091
9.080
8.245
8.401
8.631
9.610
13.625
13.625
13.625
13.625
1050G
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
157,600
199,100
291,800
407,800
500,900
5.000
6.000
6.875
7.500
8.250
2.50
2.75
3.00
3.50
4.00
Plate
Spool
Spool
Spool
Spool
15.69
15.69
15.69
15.69
15.69
15.00
28.60
30.50
32.70
34.90
15.00
29.60
31.60
34.00
36.20
5.00
5.75
6.50
6.75
7.50
2.405
8.501
8.731
9.600
9.915
2.405
9.041
9.270
10.250
10.565
15.313
15.313
15.313
15.313
15.313
H Dimensions are for reference only and are subject to change without notice unless certified.
Maximum operating speed of floating shaft assemblies is dependent on the lateral critical speed of the shaft. See floating shaft table on Page 34 for maximum BEs at various
speeds.
Rated by gear coupling rigid hubs and bolts.
l Hubs are furnished for interference fit per Table 25 on Page 51 unless otherwise specified.
n Shaft design must be specified on order. For dimensions SD and OD, see table on bottom of Pages 36 & 37.
40 (471-710)
PLATE ADAPTER
CC
OD
A D BC
RIGID
COUPLING
HUB
BE
OD
A D BC
CC
Gear Cplg
A51
BC
BC
Disc Cplg t
A52
Bolts
SPOOL
ADAPTER
A51
Bolts
A52
Wt (lb)
WR2
Wt (lb)
WR2
(lb-in2)
FALK
DISC
CPLG
SIZE
H
Falk
Qty
Dia UNC
Qty
Dia UNC
10.625
10.625
10.625
14
14
14
.625-11
.625-11
.625-11
11.000
11.000
11.000
8
8
8
.750-10
.750-10
.750-10
10.85
12.13
13.63
140
190
250
1,730
2,690
4,220
145
195
260
1,870
2,830
4,420
2500FD08
3160FD08
4630FD08
1040G
11.750
11.750
11.750
11.750
14
14
14
14
.625-11
.625-11
.625-11
.625-11
12.000
12.000
12.000
12.000
10
10
10
10
.750-10
.750-10
.750-10
.875-9
10.85
12.13
13.63
14.76
145
195
255
315
2,040
3,010
4,540
6,480
155
205
260
325
2,240
3,210
4,750
6,700
2500FD08
3160FD08
4630FD08
6470FD08
1045G
13.188
13.188
13.188
13.188
13.188
14
14
14
14
14
.750-10
.750-10
.750-10
.750-10
.750-10
13.500
13.500
13.500
13.500
13.500
8
8
8
8
8
.875-9
.875-9
.875-9
.875-9
.875-9
10.85
12.13
13.63
14.76
16.15
125
220
280
340
430
2,640
4,000
5,540
7,480
10,550
125
240
295
360
450
2,640
4,550
6,080
8,060
11,150
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
1050G
H Dimensions are for reference only and are subject to change without notice unless certified.
t Weight and WR2 values include an adapter, one disc pack, one N-hub (no bore) and hardware.
n Shaft design must be specified on order. For dimensions SD and OD, see table on bottom of Pages 36 & 37.
(471-710) 41
Date
________________________________________________
Phone ________________________________________________
Fax
________________________________________________
Response Reqd By _______________________________________
Submitted By ____________________________________________
COUPLING DESIGN:
Disc o
Grid o
Gear o
Elastomer o
Horizontally Mounted o
Vertically Mounted o
COUPLING TYPE:
Close Coupled o
___________________
Intermittent o
Spacer o
Other
Turbine o
Steam o Air o Gas o
Maximum Speed (rpm) _______________
Load Characteristics:
Unidirectional o
Reversing o
Smooth o
Light Shock o
Heavy Shock o
Little Vibration o
Med. Vibration o Hvy. Vibration o
Interference o
Other _______________
Interference o
Other _______________
Specifications Applicable:
API-610 o API-671 o
Others ______________________
Service Factor:
AGMA Recommended o
Other _______________________
Competitive Data:
Make _________________________________________________
Size & Type ____________________________________________
Bores _____________________ & _________________________
Price _____________________
Additional Comments: __________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
_______________________________________________________
42 (471-710)
Through
.438
.562
.875
1.250
1.375
.562
.875
1.250
1.375
1.750
6
8
10
12
17
22
30
8
10
12
17
22
30
38
Shaft Dia
Key
Over
Through
.125 x .125
.188 x .188
.250 x .250
.312 x .312
.375 x .375
1.750
2.250
2.750
3.250
3.750
2.250
2.750
3.250
3.750
4.500
2x2
3x3
4x4
5x5
6x6
8x7
10 x 8
38
44
50
58
65
75
85
44
50
58
65
75
85
95
Shaft Dia
Key
.500 x .500
.625 x .625
.750 x .750
.875 x .875
1.000 x 1.000
Over
Through
4.500
5.500
6.500
7.500
9.000
5.500
6.500
7.500
9.000
11.000
110
130
150
170
200
230
260
Shaft Dia
Key
Key
Over
Through
1.250 x 1.250
1.500 x 1.500
1.750 x 1.500
2.000 x 1.500
2.500 x 1.750
11.000
13.000
15.000
...
...
13.000
15.000
18.000
...
...
3.000 x 2.000
3.500 x 2.500
4.000 x 3.000
...
...
28 x 16
32 x 18
36 x 20
40 x 22
45 x 25
50 x 28
56 x 32
260
290
330
380
440
...
...
290
330
380
440
500
...
...
63 x 32
70 x 36
80 x 40
90 x 45
100 x 50
...
...
95
110
130
150
170
200
230
TABLE 7 Shaft Diameters & Ratings for NEMA 60 Hertz & 50 Hertz Metric Motors
NEMA 60 HERTZ MOTORS (hp)
Frame Size
Shaft Dia
3600 RPM
1800 RPM
Drip Proof
T Frames
.88
.88
1 1 /2
2-3
2
Enclosed 1 1/2
Drip Proof
Enclosed
TS Frames
143 145 182 184 213 215 254 256 284 286 324 326 364 365 404 405 444 445 284 286 324 326 364 365 404 405 444 445
1.13 1.13 1.38 1.38 1.63 1.63 1.88 1.88 2.13 2.13 2.38 2.38 2.88 2.88 3.38 3.38 1.63 1.63 1.88 1.88 1.88 1.88 2.13 2.13 2.38 2.38
5
3
1 1 1/2-2 3
1 1 1/2-2 3
7 1/2 10 15
5 7 1/2 10
20
15
25
20
30
25
40
30
50
40
60
50
75
60
30
25
40
30
50
40
60
50
75
60
7 1/2 10
7 1/2 10
15
15
20
20
25
25
30
30
40
40
50
50
60
60
75
75
25
25
30
30
40
40
50
50
60
60
75
75
7 1/2 10
15
20
25
30
40
50
60
75
100 125
15
20
25
30
40
50
60
75
100 125
7 1/2 10
15
20
25
30
40
50
60
75
10
15
20
25
30
40
50
60
75
5
5
Proof
1200 RPM &Drip
Enclosed
3 /4
1 1/2
Proof
900 RPM &Drip
Enclosed
1 /2
3/4
1 1/2
100
100
80
90S
90L
100L
112M
132S
132M
160M
160L
180M
180L
200M/L
Shaft Dia
19
24
24
28
28
38
38
42
42
48
48
55
3000 RPM
0,75
1,10
1,5
2,2
3,0
5,5
7,5
11
15
18,5
22
1500 RPM
0,55
0,75
1,1
1,5
2,2
3,0
5,5
7,5
11
15
18,5
1000 RPM
0,37
0,55
0,75
1,1
1,5
2,2
4
5,5
7,5
750 RPM
0,18
0,25
0,37
0,55
0,75
1,1
1,5
2,2
4
5,5
30
37
225S
55
60
225M
55
60
250S
60, 65
70
45
45
55
250M
60, 65
70
55
75
280S
65, 75
80
75
90
280M
65, 75
80
90
110
22
30
37
45
45
55
55
75
75
90
90
110
11
15
18,5
22
30
30
37
37
45
45
50
55
75
7,5
11
15
18,5
22
30
30
37
37
45
45
55
(471-710) 43
SD
SD
X HUB
Y SHAFT
20FDG/P
30FDG/P
40FDG/P
50FDG/P
60FDG/P
70FDG/P
80FDG
90FDG
100FDG
110FDG
85FDP
95FDP
105FDP
115FDP
125FDP
Y=X
Max
Bore
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
4.250
4.625
5.250
5.875
6.875
.375
.500
.500
.625
.750
.875
.875
1.000
1.000
1.250
1.000
1.250
1.250
1.500
1.750
Max
Bore
.188
.250
.250
.312
.375
.438
.438
.500
.500
.625
.500
.625
.625
.750
.875
1.750
2.000
2.375
2.750
3.250
3.750
3.750
4.250
4.750
5.375
4.375
4.750
5.375
6.000
7.000
.375
.500
.625
.625
.750
.875
.875
1.000
1.250
1.250
1.000
1.250
1.250
1.500
1.750
.125
.188
.219
.219
.250
.312
.312
.375
.438
.438
.375
.438
.438
.500
.750
Max
Bore
Max Bore
Max Bore
Int Fit w/
With Std With API
Setscrew Puller Bolt Puller Bolt
Over
Holes
Holes
Keyway
Y=W/2
X
1.750
.375
.062
2.125
.500
.125
2.500
.625
.125
3.000
.750
.125
3.375
.875
.187
3.875
1.000
.250
3.875
1.000
.250
4.500
1.000
.250
5.000
1.250
.250
5.625
1.500
.250
4.500
1.250
.250
4.875
1.250
.250
5.750
1.500
.250
6.250
1.500
.250
For Bores Over 6.5, Y=X
1.500
1.750
2.125
2.500
3.000
3.500
3.375
3.750
4.250
4.625
4.000
4.500
5.000
5.500
6.500
1 .625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
4.250
4.625
5.250
5.875
6.875
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
4.250
4.625
5.250
5.875
6.875
Std
Bore
Fits Per
Table 27
Int Fit w/
Setscrew
Over
Keyway
45
50
60
75
90
100
95
110
121
137
105
120
135
150
175
39
46
54
64
74
88
85
97
108
117
101
114
126
141
163
20FDG/P
30FDG/P
40FDG/P
50FDG/P
60FDG/P
70FDG/P
80FDG
90FDG
100FDG
110FDG
85FDP
95FDP
105FDP
115FDP
125FDP
Y=X
Max
Bore
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
5.000
5.250
6.000
6.500
7.500
.375
.500
.500
.625
.750
.875
.875
1.000
1.000
1.250
1.250
1.250
1.500
1.500
1.750
Max
Bore
.188
.250
.250
.312
.375
.438
.438
.500
.500
.625
.625
.625
.750
.750
.750
1.750
2.000
2.375
2.750
3.250
3.750
3.750
4.250
4.750
5.375
5.250
5.500
6.500
7.000
8.000
.375
.500
.625
.625
.750
.875
.875
1.000
1.250
1.250
1.250
1.500
1.500
1.750
2.000
.125
.188
.219
.219
.250
.312
.312
.375
.438
.438
.438
.500
.500
.750
.750
Max
Bore
Max Bore
Y=W/2
W
1.750
.375
.062
2.125
.500
.125
2.500
.625
.125
3.000
.750
.125
3.375
.875
.187
3.875
1.000
.250
3.875
1.000
.250
4.500
1.000
.250
5.000
1.250
.250
5.625
1.500
.250
5.750
1.500
.250
6.000
1.500
.250
6.500
1.500
.250
For Bores Over 6.5, Y=X
44 (471-710)
Max Bore
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
5.000
5.250
6.000
6.500
7.500
1.625
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
5.000
5.250
6.000
6.500
7.500
Std
Bore
Fits Per
Table 27
Int Fit w/
Setscrew
Over
Keyway
45
50
60
75
90
100
95
110
121
137
125
135
155
170
190
39
46
54
64
74
88
85
97
108
117
116
126
143
156
180
20FDG/P
30FDG/P
40FDG/P
50FDG/P
60FDG/P
70FDG/P
80FDG
90FDG
100FDG
110FDG
85FDP
95FDP
105FDP
115FDP
125FDP
Y=X
Max
Bore
1.125
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
3.500
4.000
4.500
5.000
6.000
.250
.375
.500
.500
.625
.750
.875
1.000
1.000
1.250
.875
1.000
1.000
1.250
1.500
Max
Bore
.125
.188
.250
.250
.313
.375
.438
.500
.500
.625
.438
.500
.500
.625
.750
1.188
1.750
2.000
2.375
2.750
3.250
3.750
4.250
4.750
5.375
3.625
4.125
4.750
5.250
6.500
.250
.375
.500
.625
.625
.750
.875
1.000
1.250
1.250
1.000
1.000
1.250
1.250
1.500
Max Bore
Y=W/2
Max
Bore
.094
.125
.188
.219
.219
.250
.312
.375
.438
.438
.375
.375
.438
.438
.500
1.250
1.750
2.125
2.500
3.000
3.375
3.875
4.500
5.000
5.625
3.750
4.375
5.000
5.750
6.500
.250
.375
.500
.625
.750
.875
1.000
1.000
1.250
1.500
1.000
1.000
1.250
1.500
1.500
.062
.062
.125
.125
.125
.187
.250
.250
.250
.250
.250
.250
.250
.250
.250
Int Fit w/
Setscrew
Over
Keyway
With Std
Puller Bolt
Holes
1.000
1.500
1.750
2.125
2.500
2.875
3.375
3.750
4.250
4.625
3.250
4.000
4.250
4.750
5.500
1.125
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
3.500
4.000
4.500
5.000
6.000
Max Bore
With API
Puller Bolt
Holes
Std
Bore
Fits Per
Table 27
Int Fit
w/Setscrew
Over
Keyway
...
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
3.500
4.000
4.500
5.000
6.000
28
43
50
60
70
82
95
110
121
137
95
110
120
140
165
26
39
46
54
64
74
85
97
108
117
83
100
109
120
142
20FDG/P
30FDG/P
40FDG/P
50FDG/P
60FDG/P
70FDG/P
80FDG
91FDG
100FDG
110FDG
85FDP
95FDP
105FDP
115FDP
125FDP
Y=X
Max
Bore
2.250
2.750
3.375
4.125
4.625
5.250
6.000
6.750
7.250
8.500
6.250
6.750
7.500
8.500
9.500
.625
.625
.875
1.000
1.250
1.250
1.500
1.750
1.750
2.000
1.500
1.750
1.750
2.000
2.500
Max
Bore
.375
.375
.438
.500
.625
.625
.750
.875
.875
1.000
.750
.750
.750
.750
.875
2.500
2.875
3.500
4.125
4.750
5.500
6.500
7.000
7.500
8.750
6.500
6.875
8.000
9.000
10.000
.625
.750
.875
1.000
1.250
1.250
1.500
1.750
1.750
2.000
1.500
1.750
2.000
2.000
2.500
.125
.125
.187
.250
.250
.250
.500
.750
.750
.750
.500
.750
.750
.750
.875
Max Bore
Y=W/2
Max
Bore
2.750
3.250
3.875
4.500
5.375
6.125
6.500
.750
.750
1.000
1.000
1.250
1.500
1.500
.125
.125
.250
.250
.250
.250
.250
Int Fit w/
Setscrew
Over
Keyway
With Std
Puller Bolt
Holes
2.250
2.625
3.250
3.875
4.250
5.000
5.750
6.375
6.750
8.000
5.875
6.375
7.000
7.750
9.000
2.250
2.750
3.375
4.250
4.625
5.250
6.000
6.750
7.250
8.500
6.250
6.750
7.500
8.500
9.500
1.500
.500
Max. Bore
With API
Puller Bolt
Holes
Std
Bore
Fits Per
Table 27
Int Fit
w/Setscrew
Over
Keyway
2.250
2.750
3.375
4.250
4.625
5.250
6.000
6.750
7.250
8.500
6.250
6.750
7.500
8.500
9.500
60
70
80
100
110
130
150
170
180
215
160
174
195
216
242
58
68
82
98
110
128
145
160
170
200
149
162
182
202
226
(471-710) 45
30NN 31AA
30LL
Spacer
Factor
(DF)
12CC 20NN 20AN N10, A10,
L10, H10
0.347
1.097
1.966
3.650
5.754
9.071
11.646
16.903
20.968
7.3
33.3
60.0
128.6
207.0
411.1
411.1
411.1
680.0
30NN 31AA
0.972
2.615
8.798
11.833
16.621
32.607
104.442
135.867
189.574
291.607
343.477
1.052
2.691
9.057
12.563
18.334
34.415
178.505
201.303
309.259
494.219
496.292
KA =
Spacer
Factor
12CC 20NN 20AN (DF)
30 & 31
30LL
30AL
10CC
11CC
1.138
3.031
12.266
15.608
21.776
45.202
197.325
228.947
348.688
608.767
536.894
1.093
2.851
10.420
13.921
19.908
39.078
187.444
214.237
327.792
545.545
515.795
0.739
2.152
5.958
8.738
12.567
24.487
55.092
86.934
119.593
163.395
235.597
0.695
2.065
5.550
8.174
11.818
22.830
48.782
78.003
106.812
143.466
212.606
0.655
1.985
5.194
7.679
11.153
21.383
43.770
70.737
96.498
127.870
193.703
1.657
4.422
13.251
18.588
26.037
48.162
129.570
175.102
234.417
345.544
457.369
1.632
4.322
12.238
17.976
25.754
45.919
143.940
188.485
258.634
375.407
495.589
7.3
33.3
60.0
128.6
207.0
411.1
680.0
1269.6
1742.6
2540.1
4576.0
SIZE
C-Hub
A-Hub
SIZE
Bolt
Circle
Tap
Size
Max
Bore
Bolt
Circle
Tap
Size
Max
Bore
Bolt
Circle
Tap
Size
Max
Bore
30
40
50
60
70
80
90
100
110
85
95
105
115
125
3.47
4.26
5.12
5.79
6.70
7.52
8.50
9.05
10.51
7.80
8.59
9.61
10.67
11.93
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
1.125
1.625
2.250
2.938
3.625
3.500
4.000
4.500
5.000
4.000
4.750
5.125
5.750
6.875
3.47
4.26
5.12
5.79
6.70
7.52
8.50
9.05
10.51
7.80
8.59
9.61
10.67
11.93
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
2.000
2.250
2.750
3.250
3.625
3.500
4.000
4.500
5.000
5.000
5.250
6.000
6.500
7.500
1.86
2.13
2.60
3.04
3.63
7.52
8.50
9.05
10.51
4.14
5.12
5.67
6.15
9.37
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
.375-16
1.625
1.875
2.250
2.625
3.000
3.500
4.000
4.500
5.000
3.500
4.000
4.500
5.000
6.000
1
1
1
1
BE
+
+
+
KH1 KH2 CF DF
20
30
40
50
60
70
80
90
100
110
85
95
105
115
125
N-Hub
Bolt
Circle
Tap
Size
C-Hub
A-Hub
Max Bolt
Bore Circle
74 M6-1.0-6H 45
88 M10-1.5-6H 50
108 M10-1.5-6H 60
130 M10-1.5-6H 75
147 M10-1.5-6H 90
170 M10-1.5-6H 100
191 M12-1.75-6H 95
216 M14-2.0-6H 110
230 M16-2.0-6H 121
267 M16-2.0-6H 137
198 M12-1.75-6H 105
218 M12-1.75-6H 120
244 M14-2.0-6H 135
271 M16-2.0-6H 150
303 M16-2.0-6H 175
Tap
Size
Max Bolt
Bore Circle
74
M5-0.8-6H 45
88
M10-1.5-6H 50
108 M10-1.5-6H 60
130 M10-1.5-6H 75
147 M10-1.5-6H 90
170 M10-1.5-6H 100
191 M12-1.75-6H 95
216 M14-2.0-6H 110
230 M16-2.0-6H 121
267 M16-2.0-6H 137
198 M12-1.75-6H 125
218 M12-1.75-6H 135
244 M14-2.0-6H 155
271 M16-2.0-6H 170
303 M16-2.0-6H 190
Tap
Size
Max
Bore
28 M6-1.0-6H 28
47 M6-1.0-6H 43
54 M10-1.5-6H 50
66 M10-1.5-6H 60
77 M10-1.5-6H 70
92 M10-1.5-6H 82
191 M12-1.75-6H 95
216 M14-2.0-6H 110
230 M16-2.0-6H 121
267 M16-2.0-6H 137
105 M10-1.5-6H 95
130 M10-1.5-6H 110
144 M10-1.5-6H 120
156 M12-1.75-6H 140
190 M12-1.75-6H 165
Operational
Design
.1
.25
.5
46 (471-710)
A HUB
N HUB
C HUB
A Hub
N Hub
C Hub
Taper-Lock Bushing
Taper-Lock Bushing
Taper-Lock Bushing
Bushing
Number
Bore Range
(inches)
Torque
(lbin)
1108
1215
1615
2012
2525
2525
2525
3030
3535
3535
0.500 to 1.125
0.500 to 1.250
0.500 to 1.625
0.500 to 2.000
0.750 to 2.500
0.750 to 2.500
0.750 to 2.500
0.938 to 3.000
1.188 to 3.500
1.188 to 3.500
840
1550
2740
5090
7740
11300
11300
23000
33800
44000
L
(Inches)
REFER
TO
FALK
Bushing
Number
Bore Range
(inches)
Torque
(lbin)
1108
1108
1215
1615
2012
2525
2525
3030
3535
3535
0.500 to 1.125
0.500 to 1.125
0.500 to 1.250
0.500 to 1.625
0.500 to 2.000
0.750 to 2.500
0.750 to 2.500
0.938 to 3.000
1.188 to 3.500
1.188 to 3.500
840
1300
2740
4300
7150
11300
11300
23000
33800
44000
L
(Inches)
REFER
TO
FALK
Bushing
Number
Bore Range
(inches)
Torque
(lbin)
...
1108
1215
1615
2012
2525
2525
3030
3535
3535
...
0.500 to 1.125
0.500 to 1.250
0.500 to 1.625
0.500 to 2.000
0.750 to 2.500
0.750 to 2.500
0.938 to 3.000
1.188 to 3.500
1.188 to 3.500
...
1300
2740
4300
7150
11300
11300
23000
33800
44000
L
(Inches)
...
REFER
TO
FALK
Bushing
Number
Bore Range
(inches)
Torque
(lbin)
1108
1215
1615
2012
2525
2525
3535
4040
4545
5050
5050
0.500 to 1.125
0.500 to 1.250
0.500 to 1.625
0.500 to 2.000
0.750 to 2.500
0.750 to 2.500
1.188 to 3.500
1.188 to 3.500
1.938 to 4.500
2.438 to 5.000
2.438 to 5.000
1285
2200
4300
7150
11300
11300
44250
61950
84520
110200
126000
C Hub
N Hub
A Hub
Taper-Lock Bushing
L
(Inches)
REFER
TO
FALK
Taper-Lock Bushing
Bushing
Number
Bore Range
(inches)
Torque
(lbin)
1108
1108
1215
1615
2012
2525
2525
3030
3535
3535
4545
0.500 to 1.125
0.500 to 1.125
0.500 to 1.250
0.500 to 1.625
0.500 to 2.000
0.750 to 2.500
0.750 to 2.500
0.938 to 3.000
1.188 to 3.500
1.188 to 3.500
1.938 to 4.500
1285
1300
2740
4300
7150
11300
11300
24000
44800
44800
110000
L
(Inches)
REFER
TO
FALK
Taper-Lock Bushing
Bushing
Number
Bore Range
(inches)
Torque
(lbin)
...
1108
1215
1615
2012
2525
2525
3030
3535
3535
4545
...
0.500 to 1.125
0.500 to 1.250
0.500 to 1.625
0.500 to 2.000
0.750 to 2.500
0.750 to 2.500
0.938 to 3.000
1.188 to 3.500
1.188 to 3.500
1.938 to 4.500
...
1300
3550
4300
7150
11300
11300
24000
44800
44800
110000
L
(Inches)
...
REFER
TO
FALK
(471-710) 47
Engineering Data FD
OVERHANGING HUBS Hubs may be
overhung on the shafting provided there is more
than one shaft diameter of hub/shaft engagement
for clearance fits or more than 0.75 times shaft
diameter hub/shaft engagement for interference
fits. If hub engagement is less than what is
required, long hubs must be used as follows:
FD: See Table 20 on Page 49
CAUTION: The effect of open keyways on
coupling balance should always be considered.
SD
SD
W
Y SHAFT
X HUB
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
14000FD10
15300FD08
16800FD10
17200FD12
18500FD08
19700FD10
20000FD12
23800FD10
24000FD12
24000FD08
28000FD08
29000FD12
31000FD10
36000FD10
37700FD12
44000FD12
Y=X
Max
Bore
5.000
6.000
6.625
7.250
7.750
8.250
9.750
8.000
10.500
9.000
8.000
11.000
10.250
9.000
11.000
10.250
11.000
12.000
11.000
11.000
12.000
11.000
12.000
1.250
1.500
1.750
1.750
2.000
2.000
2.500
2.000
2.500
2.500
2.000
2.500
2.500
2.500
2.500
2.500
2.500
3.000
2.500
2.500
3.000
2.500
3.000
Max
Bore
.625
.750
.875
.875
1.000
1.000
1.250
1.000
1.250
1.250
1.000
1.250
1.250
1.250
1.250
1.250
1.250
1.500
1.250
1.250
1.500
1.250
1.500
5.250
6.500
6.875
7.500
8.250
8.750
10.500
8.500
11.000
9.750
8.500
11.500
10.750
9.750
11.500
10.750
12.000
13.000
11.500
11.500
12.750
11.500
12.750
1.250
1.500
1.750
1.750
2.000
2.000
2.500
2.000
2.500
2.500
2.000
3.000
3.000
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
.438
.500
.750
.750
.750
.750
.875
.750
.875
.875
.750
1.000
1.000
.875
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
Y=W/2
Max
Bore
5.750
6.500
1.500
1.500
.250
.250
For Bores
Over
6.500"
Y=X
Shaded areas indicate maximum bores using standard recommended keys shown in Table 1, Page 41.
Max Bore
Max Bore
Std
Int Fit
With
Bore
w/Setscrew Puller
Fits Per
Over
Holes Per
Table 20 Keyway Table 16
4.750
5.375
6.000
6.625
7.000
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
5.000
6.000
6.875
7.500
8.250
8.100
9.100
...
10.000
...
...
10.375
...
...
...
...
10.850
11.375
...
...
...
...
...
Min
Bore
64
70
77
89
102
115
115
115
127
115
115
127
127
115
127
127
127
127
127
127
127
127
127
140
165
190
200
220
230
260
225
290
260
225
305
285
260
305
285
320
340
305
305
335
305
335
120
140
160
175
185
195
220
195
240
220
195
255
240
220
255
240
265
275
255
265
275
265
275
130
150
160
180
200
195
230
195
260
230
195
260
260
230
260
260
275
290
260
275
295
275
295
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
15300FD08
18500FD08
24000FD08
28000FD08
48 (471-710)
Y=X
Max
Bore
Max
Bore
5.875
7.000
7.750
8.750
9.500
10.500
12.000
13.500
14.000
14.000
14.750
1.500
1.750
2.000
2.000
2.500
2.500
3.000
3.500
3.500
3.500
3.500
.750
.875
1.000
1.000
1.250
1.250
1.500
1.750
1.750
1.750
1.750
6.000
7.000
8.000
8.750
9.625
11.125
12.500
13.875
14.250
14.250
15.750
1.500
1.750
2.000
2.000
2.500
3.000
3.000
3.500
3.500
3.500
4.000
.500
.750
.750
.750
.875
1.000
1.000
1.250
1.250
1.250
1.500
Max. Bore
Max Bore
Y=W/2
Max
Bore
6.000
...
1.500
...
.250
...
For Bores
Over
6.500"
Y=X
5.875
7.000
8.000
8.750
9.625
11.125
12.500
13.875
14.250
14.250
15.750
Min
Bore
64
70
77
89
102
115
115
127
127
127
127
Std
Int Fit
With
Bore w/Setscrew Puller
Fits Per
Over
Holes Per
Table 20 Keyway Table 16
150
180
200
220
240
280
320
340
360
360
400
135
160
175
200
215
250
275
300
315
320
350
150
170
200
215
240
275
280
280
300
310
360
Engineering Data FD
TABLE 20 FD Taper-Lock Bushing Selection
A-Hub
SIZE
2500FD08
3160FD08
4630FD08
6470FD08
8770FD08
11000FD08
13000FD08
15300FD08
18500FD08
24000FD08
28000FD08
Speed
rpm
N-Hub
Bushing
Number
Bore
Range
(Inches)
Torque
(lbin)
Bushing
Number
Bore
Range
(Inches)
Torque
(lbin)
Max l
A10, N10, &
M10
4040
5050
5050
5050
5050
8065
8065
8065
10085
10085
10085
1.438 - 4.000
2.438 - 5.000
2.438 - 5.000
2.438 - 5.000
2.438 - 5.000
5.438 - 8.000
5.438 - 8.000
5.438 - 8.000
7.000 - 10.000
7.000 - 10.000
7.000 - 10.000
77,300
126,000
126,000
126,000
126,000
456,000
456,000
456,000
869,000
869,000
869,000
3535
3535
4040
4545
5050
5050
5050
6050
7060
8065
8065
1.188 - 3.500
1.188 - 3.500
1.438 - 4.000
1.938 - 4.500
2.438 - 5.000
2.438 - 5.000
2.438 - 5.000
4.438 - 6.000
4.938 - 7.000
5.438 - 8.000
5.438 - 8.000
44,800
44,800
77,300
110,000
126,000
126,000
126,000
282,000
416,000
456,000
456,000
2900
2700
2500
2400
2200
2000
1900
1800
1750
1700
1650
H CAUTION: Cast iron bushings are not recommended for shock load, reversing load or any application which
N10
N20
M20
Spacer Factor
(DF)
N10, A10 & M10
1140
4630
1750
3200
2830
663
787
909
1040
1400
1580
135
186
409
507
610
790
909
1040
1170
1600
1820
245
352
497
675
824
922
1213
1516
1803
2180
2544
274
388
538
746
912
1112
1428
1763
2303
2492
2990
384
581
1110
1720
2360
3990
5380
7070
9870
11,400
14,400
1
1
BE
1
1
1
+
+
+
+
KH1 KH2 2 x CF(A10) 2 x CF(N10) DF
(471-710) 49
Engineering Data FD
UH
UH
UG
UG
N-HUB
A-HUB
N-Hub
A-Hub
P Max
UH Max
UG Min
Z Max
P Max
UH Max
UG Min
Z Max
6.75
6.75
6.75
7.40
7.50 l
5.000
6.000
6.875
7.500
8.250
2.50
2.75
3.00
3.50
4.00
5.500
6.750
7.625
8.250
8.750
6.60
6.75
7.40
7.50
7.58 l
5.875
7.000
8.000
8.750
9.625
2.50
2.75
3.00
3.75
4.00
6.120
7.120
8.120
9.000
9.620
A-Hub
B.C.
B.C.
7.250
8.600
9.750
10.750
11.750
.500-13 x 1.0
.625-11 x 1.2
.625-11 x 1.2
.750-10 x 1.5
.750-10 x 1.5
6.600
7.400
8.200
8.800
9.600
.375-16 x .75
.500-13 x 1.0
.625-11 x 1.2
.625-11 x 1.2
.625-11 x 1.2
50 (471-710)
N-Hub
Installation
Operational
Design
FD08
FD10
FD12
.12
.09
.06
.25
.18
.12
.50
.37
.25
Engineering Data
TABLE 25 Recommended Bores for Falk Steel Coupling Hubs Inches
Clearance Fit
Shaft
Dia
+.0000
.0005
.5000
.5625
.6250
.6875
.7500
.8125
.8750
.9375
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
1.3750
1.4375
1.5000
+.0000
.0010
1.5625
1.6250
1.6875
1.7500
1.8125
1.8750
1.9375
2.0000
+.0000
.0010
2.0625
2.1250
2.1875
Interference Fit
Shaft
Dia
+.0000
.0010
2.2500
2.3125
2.3750
2.4375
2.5000
2.5625
2.6250
2.6875
2.7500
2.8125
2.8750
2.9375
3.0000
+.0000
.0010
3.0625
3.1250
3.1875
3.2500
3.3125
3.3750
3.4375
3.5000
3.5625
3.6250
3.6875
3.7500
3.8125
3.8750
3.9375
4.0000
Clearance Fit
Interference Fit
H For shaft diameters larger than 17.000, use an average interference fit of .0005"
Shaft
Dia
+.0000
.0010
4.0625
4.1250
4.1875
4.2500
4.3125
4.3750
4.4375
4.5000
4.5625
4.6250
4.6875
4.7500
4.8125
4.8750
4.9375
5.0000
5.0625
5.1250
5.1875
5.2500
5.3125
5.3750
5.4375
5.5000
5.5625
5.6250
5.6875
5.7500
5.8125
5.8750
5.9375
6.0000
6.2500
6.5000
Clearance Fit
Interference Fit
Shaft
Dia
+.0000
.0010
6.7500
7.0000
+.0000
.0010
7.250
7.500
7.750
8.000
8.250
8.500
8.750
9.000
9.250
9.500
9.750
10.000
10.250
10.500
10.750
11.000
11.250
11.500
11.750
12.000
12.500
13.000
13.500
14.000
14.500
15.000
+.000
.001
15.500
16.000
16.500
17.000
Interference Fit
Hub
InterBore ference
+.0015 .0015
.0000 .0040
6.7460
6.9960
+.0020 .0020
.0000 .0050
7.2450
7.4950
7.7450
7.9950
8.2445 .0025
8.4945 .0055
8.7445
8.9945
9.2440 .0030
9.4940 .0060
9.7440
9.9940
10.2435 .0035
10.4935 .0065
10.7435
10.9935
11.2430 .0040
11.4930 .0070
11.7430
11.9930
12.4925 .0045
12.9925 .0075
13.4920 .0050
13.9920 .0080
14.4915 .0055
14.9915 .0085
+.0025 .0055
.0000 .0090
15.4910
15.9910
16.4905 .0060
16.9905 .0095
2000
BALANCING OF
SHAFT REQUIRED
1500
1000
BALANCING
NORMALLY NOT
REQUIRED
500
10
20
30
40
50
60
70
80
(471-710) 51
Engineering Data
Tolerance
Clearance
Transitional
Interference
j6 / k6
F7
H7
M6
Over 30 to 50
k6
F7
H7
K6
Over 50 to 80
m6
F7
H7
K7
Over 80 to 100
m6
F7
H7
M7
m6
F7
H7
P7
m6
F7
H7
R7
m6
F7
H7
R8
j6
+.008 / .003
0.4727 / 0.4724
0.5515 / 0.5511
0.6302 / 0.6298
0.7089 / 0.7066
j6
0.009 / .004
0.7483 / 0.7479
0.7877 / 0.7873
0.8665 / 0.8660
0.9452 / 0.9448
0.9846 / 0.9841
1.1027 / 1.1022
1.1814 / 1.1810
k6
+.018 / +.002
1.2605 / 1.2600
1.3786 / 1.3781
1.4967 / 1.4962
1.5755 / 1.5749
1.6542 / 1.6537
1.7723 / 1.7718
1.8904 / 1.8899
1.9692 / 1.9686
m6
+.030 / +.011
2.1665 / 2.1658
2.2059 / 2.2052
2.3634 / 2.3627
2.4815 / 2.4808
2.5602 / 2.5595
2.7571 / 2.7564
2.7964 / 2.7957
2.9539 / 2.9532
3.1508 / 3.1501
m6
+035 / +.013
3.3478 / 3.3470
3.5447 / 3.5438
3.7415 / 3.7407
3.9384 / 3.9375
m6
+.035 / +.013
4.3321 / 4.3312
4.7258 / 4.7249
m6
0.040 / +.015
4.9228 / 4.9219
5.1197 / 5.1187
5.5134 / 5.5124
5.9071 / 5.9061
6.3008 / 6.2998
6.6945 / 6.6935
7.0882 / 7.0872
Clearance Fit
Hub Bore
F7
+.016 / +.034
0.4731 / 0.4737
0.5518 / 0.5525
0.6306 / 0.6312
0.7093 / 0.7100
F7
+.020 / +.041
0.7488 / 0.7496
0.7882 / 0.7890
0.8670 / 0.8677
0.9457 / 0.9465
0.9851 / 0.9858
1.1032 / 1.1039
1.1819 /1.1827
F7
+.025 / +.050
1.2609 / 1.2618
1.3790 / 1.3799
1.4971 / 1.4980
1.5758 / 1.5767
1.6546 / 1.6555
1.7727 / 1.7736
1.8908 / 1.8917
1.9695 / 1.9704
F7
+.030 / +.060
2.1666 / 2.1677
2.2059 / 2.2071
2.3634 / 2.3645
2.4815 / 2.4827
2.5603 / 2.5614
2.7571 / 2.7582
2.7965 / 2.7976
2.9540 / 2.9551
3.1508 / 3.1519
F7
+.036 / +.071
3.3479 / 3.3492
3.5447 / 3.5461
3.7416 / 3.7429
3.9384 / 3.9398
F7
+.036 / +0.071
4.3321 / 4.3335
4.7258 / 4.7272
F7
+.043 / +.083
4.9230 / 4.9245
5.1198 / 5.1214
5.5135 / 5.5151
5.9072 / 5.9088
6.3009 / 6.3025
6.6946 / 6.6962
7.0883 / 7.0899
Transitional Fit
Fit Q
+.008
+.037
+.0003
+.0015
+.011
+.045
+.0004
+.0018
+.007
+.048
+.0003
+.0019
+.000
+.049
+.0000
+.0019
+.001
+.058
+.0000
+.0023
+.003
+.068
+.0001
+.0027
Hub Bore
H7
+.000 / +.018
0.4725 / 0.4731
0.5512 / 0.5519
0.6300 / 0.6306
0.7087 / 0.7093
H7
+.000 / +.021
0.7481 / 0.7488
0.7874 / 0.7882
0.8662 / 0.8669
0.9449 / 0.9457
0.9843 / 0.9850
1.1024 / 1.1032
1.1811 / 1.1819
H7
+.000 / +.025
1.2599 / 1.2608
1.3780 / 1.3789
1.4961 / 1.4970
1.5748 / 1.5758
1.6536 / 1.6545
1.7717 / 1.7726
1.8898 / 1.8907
1.9685 / 1.9695
H7
+.000 / +.030
2.1654 / 2.1665
2.2047 / 2.2059
2.3622 / 2.3634
2.4803 / 2.4815
2.5591 / 2.5602
2.7559 / 2.7571
2.7953 / 2.7964
2.9528 / 2.9539
3.1469 / 3.1508
H7
+.000 / +.035
3.3465 / 3.3478
3.5433 / 3.5447
3.7402 / 3.7415
3.9370 / 3.9384
H7
+.000 / +.035
4.3307 / 4.3321
4.7244 / 4.7258
H7
+.000 / +.040
4.9213 / 4.9228
5.1181 / 5.1197
5.5118 / 5.5134
5.9055 / 5.9071
6.2992 / 6.3008
6.6929 / 6.6945
7.0866 / 7.0882
Interference Fit
Fit Q
.008
+.021
.0003
+.0008
.009
+.025
.0004
+ .0010
.018
+.023
.0007
+.0009
.030
+.019
.0012
+.0007
.035
+.022
.0014
+.0009
.040
+.025
.0016
+.0010
Hub Bore
M6
.015 / .064
0.4718 / 0.4723
0.5506 / 0.5511
0.6293 / 0.6298
0.7080 / 0.7085
M6
.017 / .004
0.7473 / 0.7479
0.7867 / 0.7873
0.8654 / 0.8660
0.9442 / 0.9448
0.9835 / 0.9841
1.1017 / 1.1022
1.1804 / 1.1810
K6
.013 / +.003
1.2593 / 1.2600
1.3774 / 1.3781
1.4955 / 1.4962
1.5743 / 1.5760
1.6530 / 1.6537
1.7711 / 1.7718
1.8892 / 1.8899
1.9680 / 1.9687
K7
.021 / +.009
2.1645 / 2.1657
2.2039 / 2.2051
2.3614 / 2.3626
2.4795 / 2.4807
2.5582 / 2.5594
2.7551 / 2.7563
2.7944 / 2.7957
2.9519 / 2.9531
3.1488 / 3.1500
M7
.035 / +.000
3.3451 / 3.3465
3.5419 / 3.5433
3.7388 / 3.7402
3.9356 / 3.9370
P7
.059 / .024
4.3284 / 4.3298
4.7221 / 4.7235
P7
.068 / .028
4.9186 / 4.9202
5.1154 / 5.1170
5.5091 / 5.5107
5.9028 / 5.9044
6.2965 / 6.2981
6.6902 / 6.6918
7.0839 / 7.0855
H Dimensions shaded are in millimeters. Nonshaded are in inches. Inch hub bore rounding practice per ISO 370-1975 (E) Method A.
Q Positive values are clearance, negative values are interference. For reference only.
52 (471-710)
Fit Q
.023
.001
.0009
+.0000
.026
+.000
.0010
+.0000
.031
+.001
.0012
+.0000
.051
.002
.0020
.0001
.070
.013
.0028
.0005
.094
.037
.0037
.0015
.108
.043
.0043
.0017
Continued on Page 53
The Falk Corporation, 2002, 2004.
Engineering Data
TABLE 28 Recommended Bores for Metric Shafts per ISO/R7751969 H (Continued)
Shaft Diameter
>180
MM
190
200
>200
MM
210
220
225
>225
MM
230
240
250
>250
MM
260
270
280
>280
MM
290
300
310
315
>315
MM
320
330
340
350
355
>355
MM
360
370
380
390
400
>400
MM
410
420
430
440
450
>450
MM
460
470
480
490
500
m6
+.046 / +.017
7.4821 / 7.4810
7.8758 / 7.8747
m6
+.046 / +.017
8.2695 / 8.2684
8.6632 / 8.6621
8.8601 / 8.8589
m6
+.046 / +.017
9.0569 / 9.0558
9.4506 / 9.4495
9.8443 / 9.8432
m6
+.052 / +.020
10.2383 / 10.2370
10.6320 / 10.6307
11.0257 / 11.0244
m6
+.052 / +.020
11.4194 / 11.4181
11.8131 / 11.8118
12.2068 / 12.2055
12.4036 / 12.4024
m6
.+057 / +.021
12.6007 / 12.5993
12.9944 / 12.9930
13.3881 / 13.3867
13.7818 / 13.7804
13.9786 / 13.9772
m6
+.057 / +.021
14.1755 / 14.1741
14.5692 / 14.5678
14.9629 / 14.9615
15.3566 / 15.3552
15.7503 / 15.7489
m6
+.063 / +.023
16.1442 / 16.1426
16.5379 / 16.5363
16.9316 / 16.9300
17.3253 / 17.3237
17.7190 / 17.7174
m6
+.063 / +.023
18.1127 / 18.1111
18.5064 / 18.5048
18.9001 / 18.8985
19.2938 / 19.2922
19.6875 / 19.6859
Clearance Fit
Hub Bore
F7
+.050 / +.096
7.4823 / 7.4841
7.8760 / 7.8778
F7
+.050 / +.096
8.2697 / 8.2715
8.6634 / 8.6652
8.8602 / 8.8620
F7
+.050 / +.096
9.0571 / 9.0589
9.4508 / 9.4526
9.8445 / 9.8463
F7
+.056 / +.108
10.2384 / 10.2405
10.6321 / 10.6342
11.0258 / 11.0279
F7
+.056 / +.108
11.4195 / 11.4216
11.8132 / 11.8153
12.2069 / 12.2090
12.4038 / 12.4058
F7
+.062 / +.119
12.6009 / 12.6031
12.9946 / 12.9968
13.3883 / 13.3905
13.7820 / 13.7842
13.9788 / 13.9811
F7
+.062 / +.119
14.1757 / 14.1779
14.5694 / 14.5716
14.9631 / 14.9653
15.3568 / 15.3590
15.7505 / 15.7527
F7
+.068 / +.131
16.1444 / 16.1469
16.5381 / 16.5406
16.9378 / 16.9343
17.3255 / 17.3280
17.7192 / 17.7217
F7
+.068 / +.131
18.1129 / 18.1154
18.5066 / 18.5091
18.9003 / 18.9028
19.2940 / 19.2965
19.6877 / 19.6902
Transitional Fit
Fit Q
+.004
+.079
+.0002
+.0031
+.004
+.088
+.0002
+.0035
+.005
+.098
+.0039
+.005
+.108
+.0002
+.0043
Hub Bore
H7
+.000 / +.046
7.4803 / 7.4821
7.8740 / 7.8758
H7
+.000 / +.046
8.2677 / 8.2695
8.6614 / 8.6632
8.8583 / 8.8601
H7
+.000 / +.046
9.0551 / 9.0569
9.4488 / 9.4506
9.8425 / 9.8443
H7
+.000 . +.052
10.2362 / 10.2383
10.6299 / 10.6320
11.0236 / 11.0257
H7
+.000 / +.052
11.4173 / 11.4194
11.8110 / 11.8131
12.2047 / 12.2068
12.4016 / 12.4036
H7
+.000 / +.057
12.5984 / 12.6007
12.9921 / 12.9944
13.3858 / 13.3881
13.7795 / 13.7818
13.9764 / 13.9786
H7
+.000 / +.057
14.1732 / 14.1755
14.5669 / 14.5692
14.9606 / 14.9629
15.3543 / 15.3566
15.7480 / 15.7503
H7
+.000 / +.063
16.1417 / 16.1442
16.5354 / 16.5379
16.9291 / 16.9316
17.3228 / 17.3253
17.7165 / 17.7190
H7
+.000 / +.063
18.1102 / 18.1127
18.5039 / 18.5064
18.8976 / 18.9001
19.2913 / 19.2938
19.6850 / 19.6875
Interference Fit
Fit Q
.046
+.029
.0018
+.0011
.052
+.032
.0020
+.0013
.057
+.036
.0022
+.0014
.063
+.040
.0025
+.0016
Hub Bore
P7
.079 / .033
7.4772 / 7.4790
7.8709 / 7.8727
R7
.109 / .063
8.2634 / 8.2652
8.6571 / 8.6589
8.8540 / 8.8558
R7
.113 / .067
9.0507 / 9.0525
9.4444 / 9.4462
9.8381 / 9.8399
R7
.126 / .074
10.2313 / 10.2333
10.6250 / 10.6270
11.0187 / 11.0207
R7
.130 / .078
11.4122 / 11.4123
11.8059 / 11.8080
12.1996 / 12.2017
12.3965 / 12.3985
R7
.144 / .187
12.5928 / 12.5950
12.9865 / 12.9887
13.3802 / 13.3824
13.7739 / 13.7761
13.9707 / 13.9730
R8
.203 / .114
14.1652 / 14.1687
14.5589 / 14.5624
14.9526 / 14.9561
15.3463 / 15.3498
15.7400 / 15.7435
R8
.223 / .126
16.1330 / 16.1368
16.5267 / 16.5305
16.9204 / 16.9242
17.3141 / 17.3179
17.7078 / 17.7116
R8
.229 / .132
18.1012 / 18.1050
18.4949 / 18.4987
18.8886 / 18.8924
19.2823 / 19.2861
19.6760 / 19.6798
Fit Q
.125
.050
.0049
.0020
.155
.080
.0061
.0031
.159
.084
.0063
.0033
.178
.094
.0070
.0037
.182
.098
.0072
.0039
.201
.108
.0079
.0043
.260
.135
.0102
.0053
.286
.149
.0113
.0059
.292
.155
.0115
.0061
H Dimensions shaded are in millimeters. Nonshaded are in inches. Inch hub bore rounding practice per ISO 370-1975 (E) Method A.
Q Positive values are clearance, negative values are interference. For reference only.
(471-710) 53
bbb
aaa
bbb
aaa
54 (471-710)
Charleston, WV
304-595-1394
Phoenix, AZ
480-460-7188
Charlotte, NC
704-531-9250
Pittsburgh, PA
412-563-1754
Chicago, IL
847-677-6492
Richmond, VA
804-747-8241
Cincinnati, OH
513-563-9699
Rochester, NY
585-223-5205
Cleveland, OH
330-528-1557
St. Louis, MO
636-256-7600
Dallas, TX
469-556-7313
Denver, CO
303-980-5131
Tampa, FL
941-358-1045
Falk Auburn
1600 Pumphrey Ave.
Auburn, AL 36832
334-321-9120
FAX: 334-821-9103
Detroit, MI
248-969-2553
Victorville, CA
760-401-0749
Houston, TX
469-556-7313
Falk Renew
1903 South Moorland Blvd
New Berlin, WI 53151
262-317-1420
FAX: 262-317-1428
Kansas City, KS
913-685-3254
Vancouver, WA
360-944-6780
Main
P.O. Box 492 Zip 53201-0492
3001 W. Canal Street
Zip 53208-4200
Milwaukee, WI USA
Phone: 1-800-852-FALK (3255) or
414-342-3131
FAX: 414-937-4359
E-mail: falkinfo@falkcorp.com
Internet: www.falkcorp.com
Canada
Memphis, TN
901-309-0340
Calgary, AB
403-225-6630
Miami, FL
954-436-6055
Montreal, PQ
450-424-7100
Milwaukee, WI
262-646-4346
Toronto, ON
416-674-0346
Minneapolis, MN
763-522-0994
Vancouver, BC
604-946-8506
New Orleans, LA
504-832-1448
Latin America
Northeast
860-355-0478
Northwest
360-546-3411
Omaha, NE
402-896-4520
Mexico, D.F.
52-5-333-2500
Santiago, Chile
56-2-231-5647
Sao Paulo, Brazil
55-11-882-1000
Europe
Brighouse, United Kingdom
44-1484-401872
Asia/Pacific
Korea
82-42-603-5644
Newcastle, Australia
61-2-4962-8000
Perth, Australia
61-8-9414-7800
Shanghai, China
86-21-6219-6847
Singapore
65-444-0388
Taiwan
886-7-556-0263
South Africa
Gauteng, SA
27-11-422-2496
Distribution Centers
Auburn, AL
PH 334-821-9100
FAX 414-937-4003
Doncaster, United Kingdom
PH 44-1484-401872
FAX 44-1484-401341
Milwaukee, WI
PH 414-342-3131
FAX 414-937-4359
Sacramento, CA
PH 877-937-6744
FAX 414-937-4444
Toronto, ON
PH 416-675-6071
FAX 416-213-1020