Escolar Documentos
Profissional Documentos
Cultura Documentos
Desarrollo De La Actividad
TOPOLOGA
TABLA DE DIRECCIONAMIENTO
Dispositivo Interfaz Fa0/1 R1 S0/0/0 S0/0/1 Lo0 R2 S0/0/0 S0/0/1 Fa0/1 R3 PC1 PC3 S0/0/0 S0/0/1 NIC NIC 10.0.0.129 255.255.255.128 209.165.200.161 255.255.255.224 Direccin IP 10.0.0.1 Mscara de subred 255.255.255.128 Gateway predeterminada No aplicable No aplicable No aplicable No aplicable No aplicable No aplicable No aplicable No aplicable No aplicable 10.0.0.1 10.0.0.129
R1>ena Password: R1#config t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#interface FastEthernet0/1 R1(config-if)#ip address 10.0.0.1 255.255.255.128 R1(config-if)#no shutdown R1(config-if)# %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up R1(config-if)#interface Serial0/0/0 R1(config-if)#ip address 172.16.0.1 255.255.255.252 R1(config-if)#no shutdown clock rate 64000 %LINK-5-CHANGED: Interface Serial0/0/0, changed state to down R1(config-if)#interface Serial0/0/1 R1(config-if)#ip address 172.16.0.9 255.255.255.252 R1(config-if)#no shutdown %LINK-5-CHANGED: Interface Serial0/0/1, changed state to down R1(config-if)# R1(config-if)# R2>ena Password: R2#config t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#interface Loopback0 R2(config-if)# %LINK-5-CHANGED: Interface Loopback0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up R2(config-if)#ip address 209.165.200.161 255.255.255.224 R2(config-if)# R2(config-if)#interface Serial0/0/0 R2(config-if)#ip address 172.16.0.2 255.255.255.252 R2(config-if)#no shutdown
R2(config-if)# %LINK-5-CHANGED: Interface Serial0/0/0, changed state to up R2(config-if)#interface Serial0/0/1 R2(config-if)#ip address 172.16.0.5 255.255.255.252 R2(config-if)#no shutdown clock rate 64000 %LINK-5-CHANGED: Interface Serial0/0/1, changed state to down R2(config-if)# R2(config-if)# R2(config-if)# R3>ena Password: R3#config t Enter configuration commands, one per line. End with CNTL/Z. R3(config)#interface FastEthernet0/1 R3(config-if)#ip address 10.0.0.129 255.255.255.128 R3(config-if)#no shutdown %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up R3(config-if)#interface Serial0/0/0 R3(config-if)#ip address 172.16.0.10 255.255.255.252 R3(config-if)#no shutdown %LINK-5-CHANGED: Interface Serial0/0/0, changed state to up R3(config-if)#interface Serial0/0/1 R3(config-if)#ip address 172.16.0.6 255.255.255.252 R3(config-if)#clock rate 64000 This command applies only to DCE interfaces R3(config-if)#no shutdown R3(config-if)# %LINK-5-CHANGED: Interface Serial0/0/1, changed state to up R3(config-if)#
Paso 3. Configurar las interfaces Ethernet de PC1 y PC3. Paso 4. Probar la conectividad entre las PC.
Deben las PC poder hacer ping entre s en este momento? Pueden hacer ping a sus gateways predeterminadas?
R1#config t Enter configuration commands, one per line. R1(config)#interface Serial0/0/0 R1(config-if)#encapsulation ppp R1(config-if)#interface Serial0/0/1 R1(config-if)#encapsulation ppp R1(config-if)# R1(config-if)#end R1# R3#config t Enter configuration commands, one per line. R3(config)#interface Serial0/0/0 R3(config-if)#encapsulation ppp R3(config-if)#interface Serial0/0/1 R3(config-if)#encapsulation ppp R3(config-if)# R3(config-if)#end R3#
Paso 2. Verificar que todas las interfaces seriales utilicen la encapsulacin PPP. R1#show interface serial0/0/0 Serial0/0/0 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 172.16.0.1/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec)
R1#show interface serial0/0/1 Serial0/0/1 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 172.16.0.9/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec)
R2#show interface serial0/0/0 Serial0/0/0 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 172.16.0.2/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec) R2#show interface serial0/0/1 Serial0/0/1 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 172.16.0.5/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec) R3#show interface serial0/0/0 Serial0/0/0 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 172.16.0.10/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec) R3#show interface serial0/0/1 Serial0/0/1 is up, line protocol is up (connected) Hardware is HD64570 Internet address is 172.16.0.6/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, loopback not set, keepalive set (10 sec)
Paso 1. Configurar la autenticacin PPP CHAP en todos los enlaces seriales. Paso 2. Verificar la autenticacin PPP CHAP en todos los enlaces seriales.
Pueden todos los routers comunicarse entre s? Puede la PC1 hacer ping a la PC3?