Escolar Documentos
Profissional Documentos
Cultura Documentos
Thank you for choosing Manga Studio 5.0. This guide describes how to install Manga Studio 5.0 and register your license after installation. Be sure to read this guide when installing.
This guide (including data) has been prepared and edited based on the product program available as of November 2012 and may differ from the actual product program specifications.
Installing on Windows
To install on a Windows computer, proceed as follows.
(1) Carefully read the content of [Manga Studio 5.0 License Agreement]. (2) Select [I accept the terms of the licence agreement]. (3) Click [Next].
(1) Confirm the folder where Manga Studio 5.0 will be installed. (2) Click [Next].
5. Start installing
When the [Ready to install the Program] screen displays, click [Install]. The installation starts.
6. Installation complete
When the screen indicating installation complete displays, click [Finish]. Manga Studio 5.0 is now installed.
Completing the installation of the application is not enough for starting to use Manga Studio 5.0. To use Manga Studio 5.0, you are required to register your license and install materials subsequently. Proceed to "Initial Startup" on Page 5.
Installing on Mac OS X
To install on a Mac OS X computer, proceed as follows.
Items displayed on the installation screen may vary depending on your product.
6. Start installing
When the [Installation type] screen displays, click [Install]. The installation starts.
Please note that you will not be able to use Manga Studio 5.0 without agreeing with the terms and conditions of the "Manga Studio 5.0 License Agreement".
7. Installation complete
When the screen indicating installation complete displays, click [Close]. Manga Studio 5.0 is now installed.
(1) Carefully read the content of [Manga Studio 5.0 License Agreement]. (2) Click [Continue].
Completing the installation of the application is not enough for starting to use Manga Studio 5.0. To use Manga Studio 5.0, you are required to register your license and install materials subsequently. Proceed to "Initial Startup" on Page 5.
Initial Startup
Initial Startup
When starting Manga Studio 5.0 for the first time, you must input the serial number to register your license. Register your license to enable all Manga Studio 5.0 features. Here, steps are described based on Windows screens but the same steps also apply to Mac OS X.
(1) Input the product serial number. (2) Click [Register license].
Clicking [Start with limited features] starts the feature-limited trial version.
or the procedure when you select [Manual], see F step 2 onwards in "When License Check Fails" on Page 7.
Initial Startup
(1) Select [Yes,verify license in another procedure]. (2) Click [Next]. The [Manga Studio - License verification] screen will be displayed.
(1) Issue the confirmation key from your Web browser. With Web browser: Click the link [A] to issue the confirmation key by following the on-screen instructions. With Web browser: Read the two-dimensional code [B]. The license authentication key will be automatically input. Issue the confirmation key by following the on-screen instructions. (2) Input the issued confirmation key. (3) Click [Next].
For how to read a two-dimensional code, see the manual of your cell phone and the like. Depending on the cell phone, the two-dimensional code may be referred to as "QR code" or "barcode".
Serial Number
A serial number is required to install. Users of the package version will find it on a sticker on the disk case.
serial number
Keep the serial number in a safe place since it is essential to use Manga Studio 5.0. Serial numbers are not reissued when lost. Giving the serial number to third parties or making it accessible to an unspecified number of people is prohibited. The serial number is a combination of capitalized alphanumerical characters.
Initial Startup
(1) Input the product serial number. (2) Click [Register license].
Clicking [Start with limited features] starts the feature-limited trial version. Depending on your environment, an OS message confirming the execution of the program may be displayed. In this case, click [Allow] to continue with the time-limited trial version registration.
10
Initial Startup
(1) Select [Yes,verify license in another procedure]. (2) Click [Next]. The [Manga Studio - License verification] screen will be displayed.
(1) Issue the confirmation key from your Web browser or cell phone. With Web browser: Click the link [A] to issue the confirmation key by following the on-screen instructions. With Web browser: Read the two-dimensional code [B]. The license authentication key will be automatically input. Issue the confirmation key by following the on-screen instructions. (2) Input the issued confirmation key. (3) Click [Next].
11
For how to read a two-dimensional code, see the manual of your cell phone and the like. Depending on the cell phone, the two-dimensional code may be referred to as "QR code" or "barcode".
12
Initial Startup
13
Installing Materials
The following describes how to install materials in Manga Studio 5.0.
Installing Materials
To install materials, proceed as follows.
The number of the available material folders varies depending on your product. You can select only one material folder at a time. To install multiple material folders, install one by one.
14
Installing Materials
Click [Select Material] on the [Install Material] dialog box to install repeatedly. When you are finished, click [Finish].
8. Installation complete
When installation of the material completes, a confirmation message is displayed. Click [OK].
15
If [Manga Studio 5.0] is present in the [Applications] folder, select [Manga Studio 5E] and drag it to [Trash]. When removing Manga Studio 5.0
[Manga Studio 5.0] [Settings] [PAINT] [PlugIn] [PAINT]
[MaterialUninstaller]
16
17
Regarding the Problem Check the conditions under which the problem occurred. Characteristic of the data where the The type of work data where the problem occurred, if they have any particular problem occurred characteristic. When (where) and how the problem occurred (1) The operation performed when the problem occurred. (2) The result of the operation. If a dialog box is displayed, also report its contents. (3) S ubsequent operations performed. Always/ Frequently/Rarely/Only once
e-mail: cs@smithmicro.com
If you have mail rejection set, you may not be able to receive a reply. Be careful with you mail settings.
For how to read a two-dimensional code, see the manual of your smart phone or cell phone and the like. Depending on the smart phone or cell phone, the two-dimensional code may be referred to as "QR code" or "barcode".
18
19
* Please report any missing or misplaced page to customer support to receive a new copy. * N o part of this guide (including data) may be reproduced or copied in any form or by any means without permission from the copyright holder, except when so required by law. * T his guide (including data) has been prepared and edited based on the product program available as of November 2012 and may differ from the actual product program specifications. * CELSYS are trademarks or registered trademarks of CELSYS, Inc. * Manga Studio is registered trademarks of SmithMicro, Inc. * M icrosoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. * Apple and Macintosh are trademarks or registered trademarks of Apple Inc. in the United States and other countries. * QR code is a registered trademark of DENSO WAVE INCORPORATED. * All other company names and product names described herein are trademarks or registered trademarks of their respective holders.