Escolar Documentos
Profissional Documentos
Cultura Documentos
1465-TB
02-12
MODEL 1465
The Model 1465 is for small ows and is used primarily when sampling a uid for analytical purposes. The 316 SST body can handle inlet pressures as high as 5000 psig (344 Barg).
FEATURES
High Pressure Pressure drops to 4700 psi (324 Drop Capabilities: Barg). Trim Material Combinations: Two Trim Sizes: Gasket: Five to choose from. 0.05 and 0.19 Cv orices used. Utilizes diaphragm O-ring of TFE.
Model 1465-80
APPLICATIONS
Designed to control a wide range of uids including natural gas, inert gases, sour gas, steam, chemicals and water. Used to reduce pressure for analytical sampling. See Table 1 for more information.
Model 1465
Body Material:
Spring Chamber: Standard: Cast bronze; ASTM B62, Alloy C83600. Optional: SST; see Option -60. Diaphragms: Trim: Cv's: 302 SST, Neoprene, Elgiloy, Fluorocarbon Elast. See Table 3. SST; metallic seated. See Table 3.
Orice Size 0.109 0.156 Minimum Controllable Cv 0.0005 0.002 Max. Cv 0.05 0.19
Spring Range
Diaphragm O-ring:
TFE.
(Barg) psig (Barg) (.34-2.1) *1000 (68.9) (.69-5.5) 2500 (172.4) (4.8-9.6) 3000 (206.9) (8.6-13.8) 3500 (241.3) Option-80 180-300 (12.4-20.7) 4000 (275.8) 270-400 (18.6-27.6) 4700 (324.1) 360-500 (24.8-34.5) 4600 (317.2) * See Figure 2 and associated text.
OPTION SPECIFICATIONS
Option-2: HANDWHEEL. Plastic handwheel on standard unit; aluminum handwheel for Option -2+80. Utilize for frequent setpoint changes. PANEL MOUNTING. Includes a mounting nut and a handwheel. and S40M only trim selections available. Not available with Option -80. Option-55: SPECIAL CLEANING. Cleaning per Cashco Spec. #S-1134 for oxygen gas service. NOTE: Design Pressure Rating shall not exceed 290 Psig (20.0 Barg) when body material is SST and process medium is oxygen. SPECIAL CLEANING. Cleaning per Cashco Spec. #S-1542. NOT suitable for oxygen gas service. SST SPRING CHAMBER. Standard bronze spring chamber is replaced with cast SST material per ASTM A351, Gr. CF3M. Not available with Option -80. HIGH OUTLET PRESSURE. For controlling outlet pressure above 200 psig (13.8 Barg) setpoint. Includes a cast aluminum bronze spring chamber, ASTM B-148, Alloy C95500, for spring ranges from 180 to 500 psig (12.4 to 34.5 Barg). S1 and S40M only trim selections available. 1465-TB
Option-22:
Option-56:
3/4" -16 UNF-2A (Opt-22) 1" - 14 UNF-2A (Opt-22+80)
Option-60:
Figure 1: Option -22 Panel Mounting (handwheel portion is same for Option -2 Handwheel)
Option-80: Option-40 SST: SST NACE CONSTRUCTION. Internal wetted portions meet NACE standard MR0175 when the exterior of the regulator is not directly exposed to a sour gas environment, buried, insulated or otherwise denied direct atmospheric exposure. 316 SST body/ spring chamber material only. S40
TECHNICAL SPECIFICATIONS
TABLE 1 APPLICATIONS
Recommended Construction Trim Designation Number Metal Seat and Composition Diaphragm S3, S7 Metal Seat and Diaphragm S1 or S40M Chemicals Metal Seat and Composition Diaphragm S3 or S40 Metal Seat and Diaphragm S40M Sour Gas Metal Seat and Composition Diaphragm S40 Metal Seat and Diaphragm S1 Hydrocarbon Gas or Liquids Metal Seat and Composition Diaphragm S3 Metal Seat and Diaphragm S1, S40M Oxygen Metal Seat and Composition Diaphragm S7 Metal Seat and Diaphragm S1 Water and Condensate Metal Seat and Composition Diaphragm S3 Steam Metal Seat and Diaphragm S1 In accordance with ASME B31.3 process piping, do not use Cast Iron Body for hydrocarbon or ammable uid service with inlet pressures greater than 150 psig (10.3 Barg) or temperatures greater than 300 F (149 C). Fluid Air or Inert Gases
TABLE 2 BODY AND SPRING CHAMBER MAXIMUM OUTLET PRESSURE AND TEMPERATURE RATINGS
SST Body Materials with: Standard BRZ Spring Chamber SST Spring Chamber OPT-80 (BRZ Spring Chamber) Outlet Pressure psig 400 600 600 (Barg) (27.6) (41.4) (41.4) Temperature F -20 to +400 -20 to +400 -20 to +400 (C) (-29 to +205) (-29 to +205) (-29 to +205)
Part
360-500 psig
400
270-400 psig
300
180-300 psig
Figure 2: High Pressure Steam, Water or Condensate. Applications involving these uids should be considered for cavitation. The above uids are typically cooled to 80 to 120F (27 to 49C) before pressure is reduced. Figure 2 graphically indicates where cavitation can be expected. If a selection ends in the "cavitating zone", then multiple Model 1465's should be used in series to stage the pressure drops to eliminate cavitational damage.
100
70-140 psig
Full cavitating
5-30 psig 0 0 1000 2000 3000 4000 5000
1465-TB
METRIC UNITS (mm) A 114 124 124 194 194 175 B 23 23 23 23 23 23 C 64 64 64 64 64 64 D 52 70 E 38 38 102 102 2.27 kgs.
02/20/12
4B
Size in 1/4" (DN) (8)
Table 1
Table 2
Table 3
7
CODE A 8
Table 4
Table 5
Table 5
Table 5
Table 5
Table 5
Table 5
A
CODE A 1 2 3 4 5 6
TABLE 2 - BODY & SPRING CHAMBER MATERIALS Body / Sp. Ch. SST/SST Opt.-60 SST/BRZ Standard
TABLE 4 - RANGE SPRINGS Steel Range Spring psig 5 - 30 10 - 80 70-140 125-200 180-300 * 270-400 * 360-500 * (Barg) (.34-2.1) (.69-5.5) (4.8-9.7) (8.6-13.8) (12.4-20.7) * (18.6-14.5) * (24.8-34.5) *
TABLE 5 - OPTIONS Description No Options Handwheel Panel Mounitng Handwheel Included NACE Const: SST/SST/XX Per MR0175, NPT Body, S40,S40T Trims Special Cleaning: Per Cashco Spec #S-1134. W/ properly selected mat'ls,this procedure suitable for oxy.service, BRZ or SST body material. SPECIAL CLEANING: Per Cashco Spec.#S-1542. SST, CS & CI body/sp.ch.mat'ls. High Pressure Spring Chamber Option ---2 -22 -40SST CODE 0 2 C K
S40* S40M
* Select code 8 from Table 2 and Use with Opt-80, code U from Table 5.
-55
-56 -80
N U
For Special Construction Other Than Above, Contact Cashco for Special Product Code. 1. NUMERIC digits assigned rst in ascending order. 2. ALPHA designations are assigned second in alphabetical order. 3. Left justify. 4. Add 0 to all unused squares. 5. If insufcient quantity of squares, consult factory for prope code. Cashco, Inc. P.O. Box 6 Ellsworth, KS 67439-0006 PH (785) 472-4461 Fax. # (785) 472-3539 www.cashco.com email: sales@cashco.com exportsales@cashco. com Printed in U.S.A. Model 1465-TB