Escolar Documentos
Profissional Documentos
Cultura Documentos
Welding coordination; Welding inspection; Welding construction; Welding of metallic materials; Brazing of metallic materials; Thermal spraying; Welding of plastics.
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 3
Welding coordination
The standard EN ISO 14731 spesifies competence 3 levels for personnel for welding coordination. Annex A: Recommendation for technical knowledge in welding. IWE International Welding Engineer; IWT International Welding Technologist; IWS International Welding Specialist.
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 4
Welding inspection
National standards for certification of welding inspectors (in Norway NS 477:2012). Specification for: Typical areas of responsibility; Education, examination and certification. IIW Guidelines for IWI Personnel . IWI-S-level = NS 477
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 5
Welding Constructors
Requirements for competence are given in product standards and application standards. IIW have a Guideline for education of personnel for construction for welding IWSD.
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 6
Welding of metallic materials Welders for manual - and Welding operators for mechanized welding Standards for certification of welders and welding operators - no requirements for education. IIW has Guideline for education of International Welders IW.
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 7
Brazing
EN-ISO 13585 standard for certification of brazers. No specific requirements for education.
Thermal Spraying
EN ISO 14918 standard for certification of thermal sprayers. EWF has Guideline for education of thermal sprayers. EN ISO standard which specifies requirements for competence for Thermal Spraying Coordinator.
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 9
Welding of plastics
National standard for education and certification. EN-standard EN 13067 under revision. (for education and certification of plastic welders). EWF will adjust the Guideline for education of plastic welders in accordance with the revised EN-standard.
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 10
Norsok Standards
Specific requirements in Norsok Standards for competence: IWE is the required level for responsible welding coordinator. IWT-level can be accepted in some cases. Certified welders is a requirement. It is opend for the use of IW in spesial cases
4th. October 2012 M.Sc.M.E. Sverre Eriksen, SEWEC 12
Norsok continued Welding inspectors shall be qualified according to NS 477 or relevant IWIlevel.
Thank you!
13