The 3M(tm) General Use Filter Bag features a multi-layered polyolefin construction that provides clean, uniform, efficient filtration at high flow rates in both low and high viscosity liquids. The bag comes in four nominal micron sizes to satisfy a wide variety of filtration needs. A plastic collar / handle allows for quick and clean filter changeouts and is designed to fit into most existing bag housings.
The 3M(tm) General Use Filter Bag features a multi-layered polyolefin construction that provides clean, uniform, efficient filtration at high flow rates in both low and high viscosity liquids. The bag comes in four nominal micron sizes to satisfy a wide variety of filtration needs. A plastic collar / handle allows for quick and clean filter changeouts and is designed to fit into most existing bag housings.
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato PDF, TXT ou leia online no Scribd
The 3M(tm) General Use Filter Bag features a multi-layered polyolefin construction that provides clean, uniform, efficient filtration at high flow rates in both low and high viscosity liquids. The bag comes in four nominal micron sizes to satisfy a wide variety of filtration needs. A plastic collar / handle allows for quick and clean filter changeouts and is designed to fit into most existing bag housings.
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato PDF, TXT ou leia online no Scribd
The 3M General Use Filter Bag features a multi-layered polyolefin construction that provides clean, uniform, efficient filtration at high flow rates in both low and high viscosity liquids. The bag comes in four nominal micron sizes to satisfy a wide variety of filtration needs. A plastic collar/handle allows for quick and clean filter changeouts and is designed to fit into most existing bag housings. The large amount of surface area provided by the layers of polyolefin media result in high oil- holding capacities.
Materials of Construction Filter Media: Multi-layered polyolefin filter media provides high particle removal efficiency for high quality filtration with broad chemical compatibility. No silicone is intentionally used in materials of construction or in manufacturing. The raw materials composing these filters are FDA compliant according to CFR Title 21. Sealing Ring/Handle: Polypropylene Applications Prefilters or Final Filters for: Machine coolants Amines Acids and bases Carbon beds Makeup water DI resins Photo chemicals Plating solutions Electrocoat paints Wastewater Laundry water Glycol Product Specifications Product Number Nominal Micron Rating Length Outside Diameter Inside Diameter G101C 1 micron 16 in (41 cm) 7 in (18 cm) 6 in (15 cm) G110C 10 micron 16 in (41 cm) 7 in (18 cm) 6 in (15 cm) G125C 25 micron 16 in (41 cm) 7 in (18 cm) 6 in (15 cm) G150C 50 micron 16 in (41 cm) 7 in (18 cm) 6 in (15 cm) G201C 1 micron 32 in (81 cm) 7 in (18 cm) 6 in (15 cm) G210C 10 micron 32 in (81 cm) 7 in (18 cm) 6 in (15 cm) G225C 25 micron 32 in (81 cm) 7 in (18 cm) 6 in (15 cm) G250C 50 micron 32 in (81 cm) 7 in (18 cm) 6 in (15 cm) Operating Conditions Maximum Operating Temperature 180 F (82 C)
Suggested Maximum Differential Pressure 35 psid (2.4 bar) Maximum Recommended Flow (gpm) The 3M General Use Liquid Filter Bag can be used in fluids with widely ranging viscosities. Pressure drop through the filter bags should always be monitored and should not exceed 35 psid. Viscosity G101C G110C G125C G150C G201C G210C G225C G250C 1 centipoise 60 60 60 60 120 120 120 120 100 centipoise 38 43 43 55 75 85 85 110 1,000 centipoise 3 4 5 6 6 8 9 11 10,000 centipoise 0.3 0.4 0.5 0.5 0.5 0.7 0.9 1.0
Disposal Disposal of used filter bags must comply with appli- cable federal, state and local laws and regulations.
Order Information To order contact your local 3M Filtration Products distributor or call customer service at 1-800-648-3550.
3 Filtration Products 3M Center, Building 60-1S-16 St. Paul, MN 55144-1000 800-648-3550 IMPORTANT NOTICE: This product is sold subject to the following terms and conditions:
Warranty: If any 3M product described in this literature is defective in material or workmanship, 3M will repair or replace the defective product, or refund the purchase price for the defective product. 3M will decide which remedy applies. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULA PURPOSE. This warranty only applies if the relevant product has been stored, maintained and used in accordance with 3Ms written instructions.
Product Evaluation: Because there are many factors that can affect the use and performance of the products described in this literature, some of which are uniquely within the users knowledge and control, user is solely responsible for evaluating the relevant product to determine whether it is fit for a particular purpose, suitable for users application, and meets users performance specifications and expectations.
Limitation of Remedies and Liability: 3M IS NOT LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE, ARISING OUT OF THE USE OF OR INABILITY TO USE ANY PRODUCTS DESCRIBED IN THE LITERATURE. This limitation applies regardless of the legal theory asserted, including negligence, contract warranty, or strict liability.