Escolar Documentos
Profissional Documentos
Cultura Documentos
153 45 28 18
149 145
141 137 133 129 125 121 117 113 109 105
11.2 7.1 4.5 2.8 1.8 1.12 0.71 0.45 0.28 0.18
Not Not Permissible Not Permissible Not Permissible Just Permissible tolerable Just 8 dB (x 2.5) tolerable Just Allowable Just tolerable Allowable tolerable Allowable Good Good Allowable Good Large machines with Large machines opeMedium machines rigid and heavy founrating at speeds Good 15-75 kW or up to
Small machines, up to 15 kW 300 kW on special foundations
1.77 1.10
dations whose natural above foundation frequency exceeds natural frequency machine speed (e.g. Turbo-machinery)
Group K
Group M
Group G
Group T
Note: These values, which are the upper limits of zones A, B and C respectively, should apply to radial vibration measurements on all bearing housings or pedestals and to axial vibration measurements on housings containing thrust bearing, under steadystate operating conditions at rated speed.
0.77
A Single set of values, e.g. those applicable to the 132 to 225 mm shaft height, may be used if shown by experience to be required
ISO 1940