Você está na página 1de 9

Effect Types and Parameters (Ver.

2)

2013 ZOOM CORPORATION


Copying or reproduction of this document in whole or in part without permission is prohibited.

Effect Types and Parameters


Parameter Effect type Parameter range Effect explanation

fCycle

This lter effect changes tone characteristics cyclically.


Knob1 Page01 Rate 150 Wave Knob2 Sine, Tri, SawUp, SawDn 010 Level Knob3 0150

Sets the speed of the modulation. Depth Page02 0100

Sets the modulation waveform. Reso Adjusts the intensity of the modulation resonance.

Adjusts the output level.

Sets the depth of the modulation.

Effect screen

Parameter explanation

Tempo synchronization possible icon

Effect Types and Parameters [COMP]


M Comp This compressor provides a more natural sound.
Knob1 THRSH Page01 050 Ratio Knob2 110 Level Knob3 0150

Sets the level that activates the Adjusts the compression ratio. compressor. ATTCK 110 Adjusts the compressor attack rate.

Adjusts the output level.

Page02

OptComp

This compressor is in the style of an APHEX Punch FACTORY.


Knob1 Page01 Page02 Drive 010 Tone Adjusts the depth of the compression. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

NoiseGate

This is a noise gate that cuts the sound during playing pauses.
Knob1 Page01 Page02 THRSH 125 Level Adjusts the effect sensitivity. Knob2 0150 Adjusts the output level. Knob3

Effect Types and Parameters

[FILTER]
Exciter Adjusts the depth of the compression.
Knob1 Bass Page01 0100 Trebl Knob2 0100 Level Knob3 0150

Adjusts the amount of low-frequency Adjusts the amount of high-frequency Adjusts the level of the signal after it has passed through the module. phase correction. phase correction.

Page02

CombFLTR

This effect uses the comb lter that results from xing the modulation of the anger like an equalizer.
Knob1 Freq Page01 150 Reso Knob2 -10010 Mix Knob3 0100

This sets the emphasized frequency. HiDMP 010

Adjusts the intensity of the resonance Adjusts the amount of effected sound sound of the effect. that is mixed with the original sound. Level 0150

Page02

Adjusts the treble attenuation of the Adjusts the output level. effect sound.

Resonance

This effect varies the resonance lter frequency according to picking intensity.
Knob1 Sense Page01 -10 -1, 110 Reso Knob2 010 Level Knob3 0150

Adjusts the sensitivity of the effect.

Adjusts the intensity of the resonance Adjusts the output level. sound.

Page02

RndmFLTR

This lter effect changes character randomly.


Knob1 Page01 Speed Type Page02 150 HPF, BPF, LPF Range Chara Sets modulation speed. Knob2 0100 2Pole, 4Pole Reso Bal Adjusts frequency range affected. Knob3 010 0100 Sets effect resonance. Adjusts the balance between original and effect sounds.

Sets lter type. Level 0150

Adjusts amount of lter applied.

Page03

Adjusts the output level.

fCycle

This lter effect changes tone characteristics cyclically.


Knob1 Page01 Rate 150 Wave Knob2 Sine, Tri, SawUp, SawDn 010 Level Knob3 0150

Sets the speed of the modulation. Depth Page02 0100

Sets the modulation waveform. Reso Adjusts the intensity of the modulation resonance.

Adjusts the output level.

Sets the depth of the modulation.

[DRIVE]
Governor Simulation of the Guv'nor distortion effect from Marshall.
Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

FuzzSmile

Simulation of the Fuzz Face, which has made rock history with its humorous panel design and smashing sound.
Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Effect Types and Parameters


An original sound created by merging characteristics of an ADA MP1 and a Marshall JCM800.
Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Z MP1

Z Bottom

A high gain sound that emphasizes low and middle frequencies.


Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Z Dream

A high gain sound for lead playing based on the Mesa Boogie Road King Series II Lead channel.
Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Z Scream

An original high gain sound balanced from low to high frequencies.


Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Z Neos

A crunch sound modeled on the sound of a modied British class A combo amplier.
Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Z Wild

A high gain sound with even more overdrive boost.


Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Lead

Lead a bright and smooth distortion sound.


Knob1 Page01 Page02 Gain 0100 Tone Adjusts the gain. Knob2 0100 Level Adjusts the tone. Knob3 0150 Adjusts the output level.

Effect Types and Parameters

[MOD]
Slicer This effect creates a rhythmical sound by continuously slicing the input.
Knob1 PTTRN Page01 120 Speed Knob2 150 Bal Knob3 0100 Adjusts the balance between original and effect sounds.

Sets effect pattern. THRSH 050

Sets modulation speed. Level 0150

Page02

Adjusts effect threshold.

Adjusts the output level.

DuoPhase

This effect combines 2 phasers.


Knob1 Page01 RateA 150 RateB Knob2 150, SyncA, RvrsA 010 1100 Level Knob3 0150

Adjusts speed of LFO A modulation. Adjusts speed of LFO B modulation. Adjusts the output level. Page02 Page03 ResoA DPT_A 010 1100 ResoB DPT_B Link Seri, Para, STR Adjusts resonance of LFO A modulation. Adjusts resonance of LFO B modulation. Sets how 2 phasers are connected. Adjusts depth of LFO A modulation. Adjusts depth of LFO B modulation.

WarpPhase

This phaser has a one way effect.


Knob1 Page01 Page02 Speed DRCTN 150 Go, Back Reso Sets modulation speed. Sets direction of warping. Knob2 010 Level Sets effect resonance. Knob3 0150 Adjusts the output level.

VintageCE

This is a simulation of the BOSS CE-1.


Knob1 Comp Page01 09 Rate Knob2 150 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound.

Sets the sensitivity of the compressor. Sets the speed of the modulation. Level 0150

Page02

Adjusts the output level.

Ensemble

This is a chorus ensemble that features three-dimensional movement.


Knob1 Depth Page01 0100 Rate Knob2 150 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound.

Sets the depth of the modulation. Tone 010

Sets the speed of the modulation. Level 0150

Page02

Adjusts the tone.

Adjusts the output level.

VinFLNGR

This analog anger sound is similar to an MXR M-117R.


Knob1 Page01 Depth PreD Page02 0100 050 Rate Mix Sets the depth of the modulation. Knob2 050 0100 Reso Level Sets the speed of the modulation. Knob3 -1010 0150 Adjusts the intensity of the modulation resonance.

Sets pre-delay time of effect sound.

Adjusts the amount of effected sound Adjusts the output level. that is mixed with the original sound.

DynaFLNGR

The volume of the effect sound changes according to the input signal level with this dynamic anger.
Knob1 Page01 Page02 Depth Reso 0100 -1010 Rate Level Sets the depth of the modulation. Knob2 050 0150 Sense Sets the speed of the modulation. Knob3 -10 -1, 110 Adjusts the sensitivity of the effect.

Adjusts the intensity of the modulation resonance. Adjusts the output level.

Effect Types and Parameters


BendCho This effect provides pitch bending that uses the input signal as trigger and processes each note separately.
Knob1 Depth Page01 0100 Time Knob2 050 Bal Knob3 0100 Adjusts the balance between original and effect sounds. Level 0150 Adjusts the output level.

Adjusts the effect depth. Mode Up, Down

Sets time before effect starts. Tone 010

Page02

Sets direction of pitch bend.

Adjusts the tone.

MojoRolle

This effect modulates the pitch after picking.


Knob1 Depth Page01 0100 Speed Knob2 0100 Rise Knob3 0100 Sets the time before the effect begins to modulate the pitch.

Sets the depth of the modulation. Mode Up-Dn, Up, Down

Sets the speed of the modulation. Level 0150

Page02

Sets the direction of pitch modulation. Adjusts the output level.

RingMod

This effect produces a metallic ringing sound. Adjusting the Freq parameter results in a drastic change of sound character.
Knob1 Freq Page01 150 Tone Knob2 010 Bal Knob3 0100 Adjusts the balance between original and effect sounds.

Sets the frequency of the modulation. Level 0150

Adjusts the tone.

Page02

Adjusts the output level.

[SFX]
BitCrush This effect creates a lo- sound.
Knob1 Bit Page01 416 SMPL Knob2 050 Bal Knob3 0100 Adjusts the balance between original and effect sounds.

Sets bit depth. Tone 010

Sets sampling rate. Level 0150

Page02

Adjusts the tone.

Adjusts the output level.

Bomber

This effect produces an explosive sound when picking.


Knob1 PTTRN Page01 THRSH Level HndGn, Arm, Bomb, Thndr Decay Knob2 1100 Bal Knob3 0100

Sets type of effect sound. Page02 Page03 050 0150

Sets length of reverberations. Power 030

Adjusts the balance between original and effect sounds. Tone 010

Adjusts effect threshold. Adjusts the output level.

Adjusts strength of explosive sound. Adjusts the tone.

MonoSynth

This effect produces the sound of a monophonic (single-note playing) guitar synthesizer that detects the pitch of the input signal.
Knob1 Page01 Synth 0100 Sine, Tri, SawUp, SawDn Dry Adjusts synthesizer sound level. Wave Knob2 0100 Level Adjusts level of original sound. Tone 010 Knob3 0150 Adjusts the output level. Speed 0100

Page02

Sets waveform.

Adjusts the tone.

Adjusts smoothness of pitch change.

Z-Organ

This effect simulates an organ sound.


Knob1 Page01 Page02 Upper HPF 0100 010 Lower LPF Adjusts volume of high frequencies. Knob2 0100 010 Dry Level Adjusts volume of low frequencies. Knob3 0100 0150 Adjusts level of original sound.

Adjusts high-pass lter cutoff frequency. Adjusts low-pass lter cutoff frequency. Adjusts the output level.

Effect Types and Parameters


AutoPan This effect cyclically moves the panning position of the sound.
Knob1 Page01 Rate Depth Page02 050 010 Width Clip Sets the speed of the modulation. Knob2 L50R50 010 Level Sets the width of the panning. Adjusts the amount of waveform clipping. Higher values emphasize the auto-panning effect more. Knob3 0150 Adjusts the output level.

Sets the depth of the modulation.

Rt Closet

Simulates a rotary speaker.


Knob1 Bal Page01 0100 Mode Knob2 Slow,Fast Level Knob3 0150

Adjusts the balance between the horn (high frequencies) and the drum Sets the rotary mode. (low frequencies). Drive 0100 Adjusts the amount of amplification from the preamp.

Adjusts the output level.

Page02

[DELAY]
MultiTapD This effect produces several delay sounds with different delay times.
Knob1 Time Page01 13000 PTTRN Knob2 18 Mix Knob3 0100

Sets the delay time. Tone 010

Sets the tap pattern, which varies from Adjusts the amount of effected sound rhythmical to random patterns. that is mixed with the original sound. Level 0150 Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Page02

Adjusts the tone.

Adjusts the output level.

DynaDelay

This dynamic delay adjusts the volume of the effect sound according to the input signal level.
Knob1 Time Page01 12000 Sense Knob2 -10 -1, 110 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Sets the delay time. F .B 0100

Adjusts the effect sensitivity. Level 0150

Page02

Adjusts the feedback amount.

Adjusts the output level.

FilterDly

This effect lters a delayed sound.


Knob1 Time Page01 12000 F .B Knob2 0100 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Reso 010 Adjusts the intensity of the modulation resonance.

Sets the delay time. Rate 150

Adjusts the feedback amount. Depth 0100

Page02

Sets the speed of the modulation. Level 0150

Sets the depth of the modulation. Tail OFF/ON

Page03

Adjusts the output level.

When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Effect Types and Parameters


PitchDly This effect applies pitch shift to a delayed sound.
Knob1 Time Page01 12000 Pitch Knob2 -1212 Mix Knob3 0100

Sets the delay time. F .B Tail 0100 OFF/ON

Sets volume of pitch shift applied to Adjusts the amount of effected sound that is mixed with the original sound. delayed sound. Tone 010 Level 0150 Adjusts the tone. Adjusts the output level.

Page02

Adjusts the feedback amount. When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Page03

StereoDly

This stereo delay allows the left and right delay times to be set separately.
Knob1 TimeL Page01 12000 TimeR Knob2 12000 Mix Knob3 0100

Adjusts delay time of left channel Adjusts delay time of right channel Adjusts the amount of effected sound that is mixed with the original sound. delay. delay. LchFB LchLv 0100 0100 RchFB RchLv 0100 0100 Level Tail 0150 OFF/ON Adjusts delay feedback of left channel. Adjusts delay feedback of right channel. Adjusts the output level. When ON, effect sound continues even after effect is turned off. When Adjusts delay output of right channel. OFF , effect sound stops right when effect is turned off.

Page02

Page03

Adjusts delay output of left channel.

PhaseDly

This effect applies a phaser to a delayed sound.


Knob1 Time Page01 12000 F .B Knob2 0100 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Level 0150

Sets the delay time. Rate 150

Adjusts the feedback amount. Color 4 STG, 8 STG, inv 4, inv 8

Page02

Sets the speed of the modulation. Tail Page03 OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Sets the tone of the effect type.

Adjusts the output level.

TrgHldDly

This delay samples and holds using picking as the trigger.


Knob1 Time Page01 101000 Duty Knob2 25100 Mix Knob3 0100

Sets the delay time. THRSH 030

Sets the time that the sample-and- Adjusts the amount of effected sound that is mixed with the original sound. hold sound is produced. Level 0150 Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Page02

Adjusts effect threshold.

Adjusts the output level.

Effect Types and Parameters

[REVERB]
HD Reverb This is a high-denition reverb.
Knob1 Decay Page01 0100 Tone Knob2 010 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Level 0150

Sets the duration of the reverberations. Adjusts the tone. PreD 1200 HPF 010

Page02

Adjusts the delay between input of the Adjusts high-pass lter cutoff frequency. Adjusts the output level. original sound and start of the reverb sound. Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Page03

TiledRoom

This reverb effect simulates the acoustics of a tiled room.


Knob1 Decay Page01 130 Tone Knob2 010 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Sets the duration of the reverberations. Adjusts the tone. PreD 1100 Level 0150

Page02

Adjusts the delay between input of the Adjusts the output level. original sound and start of the reverb sound.

Arena

This reverb effect simulates the acoustics of a large enclosure such as a sports arena.
Knob1 Decay Page01 130 Tone Knob2 010 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Sets the duration of the reverberations. Adjusts the tone. PreD 1100 Level 0150

Page02

Adjusts the delay between input of the Adjusts the output level. original sound and start of the reverb sound.

EarlyRef

This effect reproduces only the early reections of reverb.


Knob1 Decay Page01 130 Shape Knob2 -1010 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Adjusts the duration of the reverb. Tone 010

Adjusts the effect envelope. Level 0150

Page02

Adjusts the tone.

Adjusts the output level.

Air

This effect reproduces the ambience of a room, to create spatial depth.


Knob1 Size Page01 1100 Tone Knob2 010 Mix Knob3 0100 Adjusts the amount of effected sound that is mixed with the original sound. Tail OFF/ON When ON, effect sound continues even after effect is turned off. When OFF , effect sound stops right when effect is turned off.

Sets the size of the space. Ref 010

Adjusts the tone. Level 0150

Page02

Adjusts the amount of reflection Adjusts the output level. from the wall.

Z2I-1493-02

Você também pode gostar