Escolar Documentos
Profissional Documentos
Cultura Documentos
WATER SOLUTIONS
SEAFLEX 55
PRODUCT BROCHURE
ULTRafILTRaTION aDVaNTaGES
Compared with traditional media filtration, ultrafiltration membranes offer the following advantages: Delivers a high filtrate quality Yields substantial savings in space, cost and energy Suited to build scalable systems Easy to integrate with other processes Provides a reliable single barrier for bacteria and viruses Protects public health, operators & the environment
BENEfITS
Dead End Filtration - Simple layout - Low energy consumption Chemically Enhanced Backwash - Low operating pressure - Fully automated, no operator involvement - Uses low cost chemicals Fully automatic operation - Logging of operating parameters - Minimal maintenance expenses - Integrity testing Pressurized System - Fully enclosed - Small footprint Direct coagulation with inorganic coagulants - Short retention times - High removal of organics
PERfORmaNCE
EffICIENCY
DESIGN
Pentair X-Flow has developed specific technologies, know-how and insights into the pre-treatment for SWRO systems using UF membranes. The distinctive features and performances make UF membranes the optimum and most cost-effective technology for seawater pre-treatment. The membranes provide a simple, single barrier solution to produce high-quality feed water that meets the highest standards for silt density index (SDI) and turbidity. With its superior particle retention performance and membrane integrity, Seaflex 55 provides an excellent permeate quality and keeps the RO membranes free from fouling and plugging with fine silt.
Seaflex 55 membranes consistently produce high-quality feed water for SWRO systems at low life cycle costs and with a small overall footprint. The energy and chemical usage is minimized while the RO cleaning frequency is substantially reduced. With the ability to deliver high performances in a broad range of feed water turbidities and a silt density index (SDI) of less than 2, Seaflex 55 membranes also substantially increase the overall system efficiency and the lifespan of the RO membranes.
Seaflex 55 successfully combines the vertical design of the Aquaflex inside-out technology with the advantages of a robust design that is ideally suited for high salinity environments. The corrosion resistant membrane housings made of PVC contain hollow fiber UF membranes that offer a high output of clean water while operating at low pressures. With a maximum filtration surface per module, Seaflex 55 offers high flux rates, a low bleed flow and long filtration times.
SpECIfICaTIONS
Membrane area [m/ft] Membrane Diameter [mm/mil] Recovery Silt Density Index Turbidity 55 [590] 0.8 [31] 90-98% <2 < 0.1 NTU
Feed
Permeate
x-fLOW PO. BOX 739, 7500 AS ENSCHEDE, NETHERLANDS WWW.X-FLOw.COM All Pentair trademarks and logos are owned by Pentair, Inc. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. Seaflex E-7/12 2012 Pentair, Inc. All Rights Reserved.