Escolar Documentos
Profissional Documentos
Cultura Documentos
Main features
G
Ductile iron body provides high strength to weight ratio. Safety factor in excess of 4 Stainless steel hinge pin with copper alloy bushes ensures a positive location and the smooth operation of the lever weight valve Double O ring contained within the copper alloy bush provides a leak-tight seal Resilient seat or metal disc Seat tightness acc. EN 12266-1 grade D Valve body coated in WRAS approved blue fusion-bonded epoxy in accordance with EN 14901 A safety guard is recommended for normal use with lever weight option please specify at time of ordering Standard arrangement is with the lever on the left hand side when facing downstream, but can be changed to opposite hand operation if required. Please specify when ordering Lever, weight and guard kit designed for installation on site to improve handling Suitable for horizontal or vertical installation
G G
PAMVCA05v.2
Technical Features
Technical information
Standard: EN 1074-3 Flange drilling: BS EN 1092-2, PN16 Max service temperature: 70
07 15 19 02 08 09 13 03 20 18 05 06 16 10 14 11 12
01
17
04
Dk /2
D 2
B L Section B-B
Materials
Ref
01 02 03 04
Dimensions
Material
Epoxy coated ductile iron JS 1030 (450/15) Epoxy coated ductile iron JS 1030 (450/15) Ductile iron JS 1030 (450/15) MF stainless steel X20Cr13 RS WRAS approved EPDM coated ductile iron Stainless steel A2-70 Stainless steel A2-70 EPDM 80 SH Stainless steel A2-70 Stainless steel X20Cr13 Brass CW614N NBR 70SH NBR 80SH Brass CW614N Polymer Mild steel Mild steel Mild steel
Description
Shell Cover Arm Disc
DN
80 100 150 200 250 300
L
241 292 356 495 622 698
D
200 220 285 340 400 460
W
width with lever weight/guard
05/08/13/20 Screw 06 07 09 10 11/12 14/15/16 17 18 19 Washer Gasket Washer Axis Bearing O ring Rubber pad Ring Axis cap Lever Weight Guard
16 21 41 85 125 160
22 27 51 99 139 174
Dimensions in mm.
Cert. No.12908